Search Results

Search found 7311 results on 293 pages for 'rows'.

Page 195/293 | < Previous Page | 191 192 193 194 195 196 197 198 199 200 201 202  | Next Page >

  • CSS Gridlines For Alternating Columns

    - by Michael
    I have created a table with 20 rows and 10 columns. I would like to create a gridline separating every two columns. So, between column 2 and 3 there would be a line separating them. There should also be lines separating columns 4 and 5, coulumns 6 and 7, and columns 8 and 9. But I do not want to have a line separating columns 1 and 2, or columns 3 and 4, etc. Is there any way to do this with CSS? I have tried creating a left border on each individual cell of the column, but it does not give me a solid line going down the column. Any help would be greatly appreciated.

    Read the article

  • gridview check duplicates not using sql

    - by Tomasusa
    I have a code: foreach (GridViewRow dr in gvCategories.Rows)<br/> { <br/> if (dr.Cells[0].Text == txtEnterCategory.Text.Trim())<br/> <br/> isError=true; <br/> <br/> } Debugging: dr.Cells[0].Text is always "", even there are records. How to use a loop to check each row to find if a record exists in the gridview not using sql?

    Read the article

  • Different execution plan for similar queries

    - by Graham Clements
    I am running two very similar update queries but for a reason unknown to me they are using completely different execution plans. Normally this wouldn't be a problem but they are both updating exactly the same amount of rows but one is using an execution plan that is far inferior to the other, 4 secs vs 2 mins, when scaled up this is causing me a massive problem. The only difference between the two queries is one is using the column CLI and the other DLI. These columns are exactly the same datatype, and are both indexed exactly the same, but for the DLI query execution plan, the index is not used. Any help as to why this is happening is much appreciated. -- Query 1 UPDATE a SET DestKey = ( SELECT TOP 1 b.PrefixKey FROM refPrefixDetail AS b WHERE a.DLI LIKE b.Prefix + '%' ORDER BY len(b.Prefix) DESC ) FROM CallData AS a -- Query 2 UPDATE a SET DestKey = ( SELECT TOP 1 b.PrefixKey FROM refPrefixDetail b WHERE a.CLI LIKE b.Prefix + '%' ORDER BY len(b.Prefix) DESC ) FROM CallData AS a

    Read the article

  • Animating Reloading of UITableView

    - by ustun
    I am trying to animate table rows in a UITableView in an iPhone project as I swipe across the screen to reload the data. When I disable animations and only call reloadData, table continues responding to swipe gestures. When I add animations with the reloadSections:WithRowAnimation: method, table stops responding to swipes, and only the navigation bar at the top responds to swipes. Another change is that, table starts responding to selection and I have to manually disable it again. I suspect these two issues might be related. I am using the swipe detection code over here btw: 1

    Read the article

  • Accessing Textboxes in Repeater Control

    - by CccTrash
    All the ways I can think to do this seem very hackish. What is the right way to do this, or at least most common? I am retrieving a set of images from a LINQ-to-SQL query and databinding it and some other data to a repeater. I need to add a textbox to each item in the repeater that will let the user change the title of each image, very similar to Flickr. How do I access the textboxes in the repeater control and know which image that textbox belongs to? Here is what the repeater control would look like, with a submit button which would update all the image rows in Linq-to-SQL:

    Read the article

  • .NET interview, code structure and the design

    - by j_lewis
    I have been given the below .NET question in an interview. I don’t know why I got low marks. Unfortunately I did not get a feedback. Question: The file hockey.csv contains the results from the Hockey Premier League. The columns ‘For’ and ‘Against’ contain the total number of goals scored for and against each team in that season (so Alabama scored 79 goals against opponents, and had 36 goals scored against them). Write a program to print the name of the team with the smallest difference in ‘for’ and ‘against’ goals. the structure of the hockey.csv looks like this (it is a valid csv file, but I just copied the values here to get an idea) Team - For - Against Alabama 79 36 Washinton 67 30 Indiana 87 45 Newcastle 74 52 Florida 53 37 New York 46 47 Sunderland 29 51 Lova 41 64 Nevada 33 63 Boston 30 64 Nevada 33 63 Boston 30 64 Solution: class Program { static void Main(string[] args) { string path = @"C:\Users\<valid csv path>"; var resultEvaluator = new ResultEvaluator(string.Format(@"{0}\{1}",path, "hockey.csv")); var team = resultEvaluator.GetTeamSmallestDifferenceForAgainst(); Console.WriteLine( string.Format("Smallest difference in ‘For’ and ‘Against’ goals > TEAM: {0}, GOALS DIF: {1}", team.Name, team.Difference )); Console.ReadLine(); } } public interface IResultEvaluator { Team GetTeamSmallestDifferenceForAgainst(); } public class ResultEvaluator : IResultEvaluator { private static DataTable leagueDataTable; private readonly string filePath; private readonly ICsvExtractor csvExtractor; public ResultEvaluator(string filePath){ this.filePath = filePath; csvExtractor = new CsvExtractor(); } private DataTable LeagueDataTable{ get { if (leagueDataTable == null) { leagueDataTable = csvExtractor.GetDataTable(filePath); } return leagueDataTable; } } public Team GetTeamSmallestDifferenceForAgainst() { var teams = GetTeams(); var lowestTeam = teams.OrderBy(p => p.Difference).First(); return lowestTeam; } private IEnumerable<Team> GetTeams() { IList<Team> list = new List<Team>(); foreach (DataRow row in LeagueDataTable.Rows) { var name = row["Team"].ToString(); var @for = int.Parse(row["For"].ToString()); var against = int.Parse(row["Against"].ToString()); var team = new Team(name, against, @for); list.Add(team); } return list; } } public interface ICsvExtractor { DataTable GetDataTable(string csvFilePath); } public class CsvExtractor : ICsvExtractor { public DataTable GetDataTable(string csvFilePath) { var lines = File.ReadAllLines(csvFilePath); string[] fields; fields = lines[0].Split(new[] { ',' }); int columns = fields.GetLength(0); var dt = new DataTable(); //always assume 1st row is the column name. for (int i = 0; i < columns; i++) { dt.Columns.Add(fields[i].ToLower(), typeof(string)); } DataRow row; for (int i = 1; i < lines.GetLength(0); i++) { fields = lines[i].Split(new char[] { ',' }); row = dt.NewRow(); for (int f = 0; f < columns; f++) row[f] = fields[f]; dt.Rows.Add(row); } return dt; } } public class Team { public Team(string name, int against, int @for) { Name = name; Against = against; For = @for; } public string Name { get; private set; } public int Against { get; private set; } public int For { get; private set; } public int Difference { get { return (For - Against); } } } Output: Smallest difference in for' andagainst' goals TEAM: Boston, GOALS DIF: -34 Can someone please review my code and see anything obviously wrong here? They were only interested in the structure/design of the code and whether the program produces the correct result (i.e lowest difference). Much appreciated. "P.S - Please correct me if the ".net-interview" tag is not the right tag to use"

    Read the article

  • DataView.RowFilter an ISO8601

    - by Ryan
    I have a DataTable (instance named: TimeTable) whose DefaultView (instance named: TimeTableView) I am trying to use to filter based on a date. Column clock_in contains an ISO8601 formatted string. I would like to select all the rows in this DataTable/DefaultView between 2009-10-08T08:22:02Z and 2009-10-08T20:22:02Z. What would I have to filter on this criteria? I tried: TimeTableView = TimeTable.DefaultView; TimeTableView.RowFilter = "clock_in >= #2009-10-08T08:22:02Z# and #2009-10-08T20:22:02Z#"; This is not working for me. Am I operating on the wrong object or is my filter syntax wrong?

    Read the article

  • Scroll bar not maintaining its position in ListView (ASP.net)

    - by AJ
    Hi I have a listview inside a DIV which shows the scroll bars. At one time, let's say, 10 rows can be seen. I scroll down and click Edit on 25 row. To my surprise, the scroll goes to the first row (although if I go back to 25th row, the row is in edit mode) My issue, how I can make sure that the scroll bar maintains its position to 25th row after clicking on Edit button? Please advise. Thanks AJ .StopScroll1{ Z-INDEX: 20; POSITION: relative;left:-1px; TOP: expression(document.getElementById("divGrid1").scrollTop); }        ..... .....

    Read the article

  • Force 'Replace Into' to use a certain index

    - by Bobby
    I have a MySQL (5.0) table with 3 rows which are considered a combined Unique Index: CREATE TABLE `test`.`table_a` ( `Id` int(11) NOT NULL AUTO_INCREMENT, `field1` varchar(5) COLLATE latin1_swedish_ci NOT NULL DEFAULT '', `field2` varchar(5) COLLATE latin1_swedish_ci NOT NULL DEFAULT '', `field3` varchar(5) COLLATE latin1_swedish_ci NOT NULL DEFAULT '', PRIMARY KEY (`Id`), INDEX `IdxUnqiue` (`field1`(5),`field2`(5),`field3`(5)) ) ENGINE=MyISAM; This table should be filled with a REPLACE INTO query: REPLACE INTO table_a ( Field1, Field2, Field3 ) VALUES ( "Test1", "Test2", "Test3" ) The behavior I'd like to see is that this query always overrides the previous inserted row, because IdxUnique is...ahm, triggered. But unfortunately, there's still the primary index which seems to kick in and always inserts a new row. What I get: Query was executed 3 times: +---Id---+---Field1---+---Field2---+---Field3---+ | 1 | Test1 | Test2 | Test2 | | 2 | Test1 | Test2 | Test2 | | 3 | Test1 | Test2 | Test2 | +--------+------------+------------+------------+ What I want: Query was executed 3 times: +---Id---+---Field1---+---Field2---+---Field3---+ | 3 | Test1 | Test2 | Test2 | +--------+------------+------------+------------+ So, can I tell REPLACE INTO to use just a certain Index or to consider one 'more inportant' then another?

    Read the article

  • Nested form using accepts_nested_attributes_for with pre-population from another table

    - by mikeydelamonde
    I'm using Rails 2.3.5 and have a nested structure as follows: Lists has_many Items Items_Features has_many Features Items_Features has_many Items Items_Features has a text field to hold the value of the feature Then I have a nested form with partials to update and display this so that it updates Lists, Items and Items_Features What I want to do is generate input fields for each of the rows in features so that the user can fill in a value and it gets inserted/updated in items_features. I also want a label next to the box to display the feature name. It might look like this: List name: Cheeses Item1 name: Edam Feature, hardness: - fill in - <= this list of features from feature table Feature, smell: - fill in - How can I interrupt the nice and easy accepts_nested_attributes_for system to display this as I want?

    Read the article

  • Dealing w/ Sqlite Join results in a cursor

    - by Bill
    I have a one-many relationship in my local Sqlite db. Pretty basic stuff. When I do my left outer join I get back results that look like this: the resulting cursor has multiple rows that look like this: A1.id | A1.column1 | A1.column2 | B1.a_id_fk | B1.column1 | B1.column2 A1.id | A1.column1 | A1.column2 | B2.a_id_fk | B2.column1 | B2.column2 and so on... Is there a standard practice or method of dealing with results like this ? Clearly there is only A1, but it has many B-n relationships. I am coming close to using multiple queries instead of the "relational db way". Hopefully I am just not aware of the better way to do things. I intend to expose this query via a content provider and I would hate for all of the consumers to have to write the same aggregation logic.

    Read the article

  • C# implicit conversions

    - by Chris Boden
    Hello, I'm currently working on an application where I need to load data from an SQL database and then assign the retrieved values into the properties of an object. I'm doing this by using reflection since the property names and column names are the same. However, many of the properties are using a custom struct type that is basically a currency wrapper for the decimal type. I have defined an implicit conversion in my struct: public static implicit operator Currency(decimal d) { return new Currency(d); } This works fine when I use it in code. However, when I have this: foreach (PropertyInfo p in props) { p.SetValue(this, table.Rows[0][p.Name], null); } It throws an ArgumentException stating that it cannot convert from System.Decimal to Currency. I'm confused since it works fine in any other circumstance.

    Read the article

  • JPanel: both implementing my own paintComponent() and rendering children doesn't work

    - by Paul Marshall
    I'm extending a JPanel to display a game board, and adding a JEditorPane at the bottom to hold some status text. Unfortunately, the game board renders just fine, but the JEditorPane is just a blank gray area until I highlight the text in it, when it will render whatever text is highlighted (but not the rest). If I'm understanding Swing right, it should work, because super.paintComponent(g) should render the other children (i.e., the JEditorPane). Tell me, o great stackoverflow, what bonehead mistake am I making? public GameMap extends JPanel { public GameMap() { JEditorPane statusLines = new JEditorPane("text/plain","Stuff"); this.setLayout(new BoxLayout(this,BoxLayout.PAGE_AXIS)); this.add(new Box.Filler(/*enough room to draw my game board*/)); this.add(statusLines); } public void paintComponent(Graphics g){ super.paintComponent(g); for ( all rows ){ for (all columns){ //paint one tile } } } }

    Read the article

  • How do I detect when a cell's value has changed in Silverlight?

    - by jvenema
    Hey folks, I'm working in Silverlight, trying to figure out how to set a grid cell font color based on the contents of the cell. I have an ObservableCollection bound to a DataGrid, and my items implement INotifyPropertyChanged so the grid updates as I change the values; it's all working perfectly, including letting me sort items and keep the sorting while I update the underlying items. I know I can use the LoadingRow event to change colors, but the only way I can get the event to fire is by changing the grids datasource, in which case my sorting goes out the window. So, what I really want is a way to either 1) loop the rows in the datagrid, find the cell I need, and change it's color or 2) implement a custom column that I can use to dynamically set the color. The problem is how to actually do either of those things :) All suggestions welcome.

    Read the article

  • Monitor database table for external changes from within Rails application

    - by jhwist
    I'm integrating some non-rails-model tables in my Rails application. Everything works out very nicely, the way I set up the model is: class Change < ActiveRecord::Base establish_connection(ActiveRecord::Base.configurations["otherdb_#{RAILS_ENV}"]) set_table_name "change" end This way I can use the Change model for all existing records with find etc. Now I'd like to run some sort of notification, when a record is added to the table. Since the model never gets created via Change.new and Change.save using ActiveRecord::Observer is not an option. Is there any way I can get some of my Rails code to be executed, whenever a new record is added? I looked at delayed_job but can't quite get my head around, how to set that up. I imagine it evolves around a cron-job, that selects all rows that where created since the job last ran and then calls the respective Rails code for each row.

    Read the article

  • updating batches of data

    - by gaponte69
    I am using GridView in asp .net and editing data with edit command field property (as we know after updating the edited row, we automatically update the database), and I want to use transactions (with begin to commit statement - including rollback) to commit this update query in database, after clicking in some button (after some events for example), not automatically to insert or update the edited data from grid directly to the DB...so I want to save them somewhere temporary (even many edited rows - not just one row) and then to confirm the transaction - to update the real tables in database... Any suggestions are welcomed... I've used some good links, but very helpful, like: http://www.asp.net/learn/data-access/tutorial-63-cs.aspx http://www.asp.net/learn/data-access/tutorial-66-cs.aspx etc...

    Read the article

  • How to check value of stored procedure output parameter

    - by Anna T
    I have a stored procedure that: A. inserts some rows into a "table variable" based on some joins B. selects all values from column x from that table into a string with comma separated values C. selects all from the "table variable" If I execute the procedure like this: EXEC CatalogGetFilmDetails2 2,111111; a table is returned as instructed per step C above. How can I execute it so that also the output parameter value is displayed? (see point B above). I need to check if it's calculated properly. And since the second parameter is of output type, meaning it's calculated inside the procedure, why is it mandatory to specify a value for it when executing the procedure? I normally use a random value for it, it anyway doesn't matter/impact the result. On the other hand if I try to execute it without the output parameter, it returns an error) Thank you very much! This is how the procedure starts: CREATE PROCEDURE CatalogGetFilmDetails2 (@FilmID int, @CommaSepString VARCHAR(50) OUTPUT) AS And this is how @CommaSepString is calculated: SELECT @CommaSepString = STUFF((SELECT ', ' + Categ FROM @Filme1 FOR XML PATH('')), 1,1,'')

    Read the article

  • MySQL 5.1 implicit cast from now() to a date field

    - by Savageman
    Hello, I have an issue with MySQL 5.1. A datetime data type isn't implicitly casted to match a date column. SELECT * FROM my_table WHERE my_date_field = NOW() This request doesn't return any rows using MySQL 5.1, but works well with version 5.0. If we use CURDATE() instead of NOW() it works both in MySQL 5.0 and MySQL 5.1. If the cast is explicit (CAST(NOW() AS DATE)), it also works both in MySQL 5.0 and MySQL 5.1. The problem only appears with implicit cast from datetime to date. Doesn't anyone already encountered this issue or has a clue about how to solve this problem? I know it's not the best to use NOW() instead of CURTIME(), but this isn't the question here. It is currently used in an application and the purpose is to avoid rewriting everything. Thanks!

    Read the article

  • Pass CSS property dynamically from panelgrid

    - by Bernad Ali
    I have a hidden property which is fetched from ebean. how do i pass that color code property to css function? <h:panelGrid id="testpanel" columns="#{message.no_of_columns}" rows="#{message.no_of_rows}" styleClass="dynamicGrid"> <c:forEach items="#{bLDashBoardAction.listBondLoc}" var="item"> <h:panelGroup> <h:outputText value="#{item.rackTagCode}" /> <h:hiddenInput value="#{item.colorEBean.colorCode};" /> </h:panelGroup> </c:forEach> </h:panelGrid> this is my css property,background need to be assigned from panelgrid colorcode .dynamicGrid td { width: 50px; height: 50px; border: 4px solid gray; background: }

    Read the article

  • How can I search for numbers in a varchar column

    - by dave
    I've got a simple nvarchar(25) column in an SQL database table. Most of the time, this field should contain alphanumeric text. However, due to operator error, there are many instances where it contains only a number. Can I do a simple search in SQL to identify these cases? That is, determine which rows in the table contain only digits in this column. As an extension, could I also search for those column values which contain only digits and a space and/or slash. In other languages (eg. Perl, Java) a regular expression would resolve this quickly and easily. But I haven't been able to find the equivalent in SQL.

    Read the article

  • QT clicked signal dosnt work on QStandardItemModel with tree view

    - by user63898
    Hello i have this code in QT and all i want to to catch the clicked event when some one clicking in one of the treeview rows without success here is my code: (parant is the qMmainwindow) m_model = new QStandardItemModel(0, 5, parent); // then later in the code i have proxyModel = new QSortFilterProxyModel; proxyModel->setDynamicSortFilter(true); setSourceModel(createMailModel(parent)); ui.treeView->setModel(proxyModel); ui.treeView->setSortingEnabled(true); ui.treeView->sortByColumn(4, Qt::DescendingOrder); // and my signal/slot looks like this but its not working //and im not getting eny clicked event fired connect(ui.treeView,SIGNAL(Clicked(const QModelIndex& ) ), this,SLOT( treeViewSelectedRow(const QModelIndex& ) ) ); also how can i debug QT signal/slots so i can see some debug massages printing when something is wrong ?

    Read the article

  • How to get a list of unchecked checkboxes when submittimg a form?

    - by SzamDev
    Hi I have this code for example : $b = ""; while ($row = mysql_fetch_array($rows)) { if ($row['enabled'] == 1) { $b = "checked"; } else { $b = "": } echo ""; } When I execute this code, I will get a list of checkboxes, some of them are checked and others are not. I can use this code to get a list of checked checkboxes. if (isset($_POST['sub'])) { //check if form has been submitted or not $nam = $_POST['nam']; if (!empty($nam)) { foreach($nam as $k=>$val){ // proccess operation with checked checkboxes } } I need to know how I can get list of unckecked checkboxes after submitting the form. Thanks in advance.

    Read the article

  • Subquery works in 9i but not in 11g

    - by Zsuetam
    Statement below is working on Oracle 9i but not on Oracle 11g SELECT * FROM ( SELECT 0 scrnfail_rate, '9' zz, 7 hh FROM DUAL UNION ALL SELECT 0 scrnfail_rate, '9' zz, 7 hh FROM DUAL ) WHERE zz IS NOT NULL AND TO_CHAR (hh) NOT IN ( SELECT DECODE ( scrnfail_rate, 0, -1, ROUND (LEVEL * 1 / (scrnfail_rate / 100)) - ROUND (1 / (2 * (scrnfail_rate / 100))) ) AS nno FROM DUAL WHERE NVL (scrnfail_rate, 0) > 0 CONNECT BY LEVEL <= ROUND(9 * scrnfail_rate / 100) ) It looks like Oracle 11g is ignoring where decode or even where clause in the subquery. This query should return two rows as it does on Oracle 9i, but results ORA-01476: divisor is equal to zero on Oracle 11g EE 11.2.0.1.0 - 64bit. Can anyone help? Thanks!

    Read the article

  • Database storage for high sample rate data in web app

    - by Jim
    I've got multiple sensors feeding data to my web app. Each channel is 5 samples per second and the data gets uploaded bundled together in 1 minute json messages (containing 300 samples). The data will be graphed using flot at multiple zoom levels from 1 day to 1 minute. I'm using Amazon SimpleDB and I'm currently storing the data in the 1 minute chunks that I receive it in. This works well for high zoom levels, but for full days there will be simply be too many rows to retrieve. The idea I've currently got is that every hour I can crawl through the data and collect together 300 samples for the last hour and store them in an hour Domain (table if you like). Does this sound like a reasonable solution? How have others implemented the same sort of systems?

    Read the article

  • Javascript Date Picker Into A Textfield

    - by Dilukshan Mahendra
    I'm trying to use a date picker for a date field but my date fields ID is a dynamic id, since the fields generates in table rows, like <input type="text" id="date<%=n%>"/> But my date picker script requires the ID to attach the date picker into the above text field like below, <script type="text/javascript"> new datepickr('datepick', { dateFormat: 'Y-m-d' }); </script> Is there any other way to make this work?

    Read the article

< Previous Page | 191 192 193 194 195 196 197 198 199 200 201 202  | Next Page >