Search Results

Search found 41511 results on 1661 pages for 'via point'.

Page 195/1661 | < Previous Page | 191 192 193 194 195 196 197 198 199 200 201 202  | Next Page >

• Amazon EC2 vs Dedicated server at Hetzner, what's the use for EC2?

  - by C-Blu

  After searching the web I still can't find the reason to use EC2. What's the point to scale EC2? If you expect a huge burst in traffic, they say. OK, but what if you already have a couple of sites with good traffic, and for example medium reserved EC2 instance is not enough. You are paying $36.60(medium reserved for 1year) in EU(Ireland) + traffic + optional expenses for databases and S3 if you use them. Of course as some point when you are under $56.6-$66.1 you can optimize your hosting costs with Amazon EC2. But when you get at some point if purchase EX4 server from Hetzner, it will surpass your perfomance needs for a long time, before you get a massive traffic. (I am wrong?) CPU: i7-2600 Quadcore (3.4-3.8 Ghz) RAM: 16 GB HDD: 2x3 TB SATA (6 Gbit/s) - I think that disc performance of a dedicated is better then of Amazon EBS Traffic: 10 TiB in month included. This is what you get from Hetzner for $56(- 19% VAT) or $66 for EU residents. Please, tell me what's the reason to use Amazon? Which load won't a server from Hetzner take, but Amazon Auto Scaling will? The maintenance of dedicated vs EC2 is still the same? Or hardware failure at Amazon, won't ruin your EBS storage? I'm still not at the level when I need expensive hosting, but want to know beforehand, just to be sure if Amazon infrastructure is better then pure performance of Hetzner's hardware.

  Read the article

• How do you plan your asynchronous code?

  - by NullOrEmpty

  I created a library that is a invoker for a web service somewhere else. The library exposes asynchronous methods, since web service calls are a good candidate for that matter. At the beginning everything was just fine, I had methods with easy to understand operations in a CRUD fashion, since the library is a kind of repository. But then business logic started to become complex, and some of the procedures involves the chaining of many of these asynchronous operations, sometimes with different paths depending on the result value, etc.. etc.. Suddenly, everything is very messy, to stop the execution in a break point it is not very helpful, to find out what is going on or where in the process timeline have you stopped become a pain... Development becomes less quick, less agile, and to catch those bugs that happens once in a 1000 times becomes a hell. From the technical point, a repository that exposes asynchronous methods looked like a good idea, because some persistence layers could have delays, and you can use the async approach to do the most of your hardware. But from the functional point of view, things became very complex, and considering those procedures where a dozen of different calls were needed... I don't know the real value of the improvement. After read about TPL for a while, it looked like a good idea for managing tasks, but in the moment you have to combine them and start to reuse existing functionality, things become very messy. I have had a good experience using it for very concrete scenarios, but bad experience using them broadly. How do you work asynchronously? Do you use it always? Or just for long running processes? Thanks.

  Read the article

• 2d game view camera zoom, rotation & offset using 'Filter' / 'Shader' processing?

  - by Arthur Wulf White

  I wish to add the ability to zoom-in, zoom-out, rotate and move the view in a top-down view over a collection of points and lines in a large 2d map. I split the map into a grid so I only need to render the points that are 'near' the camera. My question is, how do I render a point A(Xp,Yp) assuming the following details: Offset of the camera pov from the origin of the map is: Xc, Yc Meaning the camera center is positioned on top of that point. If there's a point in Xc, Yc it is positioned in the center of the screen. The rotation angle is: alpha The scale is: S Read my answer first. I am thinking there is more optimized solution, thanks. My question is how to include the following improvement: I read in the AS3 Bible book that: In regards to ShaderInput, You can use these methods to coerce Pixel Bender to crunch huge sets of data masquerading as images, without doing too much work on the ActionScript side to make them look like images. Meaning if I am performing the same linear function on a lot of items, I can do it all at once if I use Shaders correctly and save processing time. Does anyone know how that is accomplished? Here is a sample of what I mean: http://wonderfl.net/c/eFp0/

  Read the article

• Is there supposed to be a Windows Network folder in the file manager?

  - by Cindy

  I pulled my hard drive out of my computer and started with a bootable usb version of Ubuntu, which I am using that at this point. At first boot, I see that there is a Windows folder when browsing network. Since there is no operating system present, besides the usb that I boot from, should there be a Windows network folder? Original question First of all I just want to say, I wish I had tried Ubuntu a couple years ago when I first heard about it, but I was like a lot of the population and went with the "easy way" and stuck with Windows because I didn't want to take the time to learn something new. Well, about 3 months ago I realized someone had hacked into my computer, and then found they had hacked my facebook account so I decided I had better do a complete credit check. I found student loans (totalling about 30,000 so far) had recently showed up on my credit report. I think it's going to be a long, long road to recovery now but I'm hoping Ubuntu will be a start and definitely an eye opener. My relationship with Windows is over. I had 3 antivirus programs running, none were protecting me like I thought they were. Turned out a free program that I downloaded was the only one that could detect and clean the virus, but by then it was too late. Anyhow, my question is, I pulled my hard drive out of my computer and started with a bootable usb version of Ubuntu, which I am using that at this point. At first boot, I see that there is a Windows folder when browsing network. Since there is no operating system present, besides the usb that I boot from, should there be a Windows network folder? I am using a local ISP (and won't be much longer because I am very paranoid at this point) and I want to make sure all is ok before I put my new hard drive in and install Ubuntu. Any help would be appreciated. Also, I want to thank Ubuntu and the community for giving people an alternative.

  Read the article

• QuickTimeInstaller causing me buckets of issues

  - by Chadworthington

  Today I saw this message: After it installed and I rebooted, I was getting the Blue Screen of Death every few clicks. So...to resolve, I restored to a Restore Point when all was working, 2 days ago. Then, QuickTime reappeared and tried to reinstall itself. Is this iTunes related? or might it be related to Windows Live Messenger? Any suggestions on how to stop this auto installation? Update: Rolling back to a previous Restore Point temporarily fixed the issue but the patch was automatically applied a second time. Then, I made the horrible mistake of uninstalling iTunes and this caused my previous old restore point to be wiped away because of a limited amount of space that I alloted to the Windows Restore functionality. I fear that I will be faced with many issues ahead... Please help

  Read the article

• Restrict movement within a radius

  - by Phil

  I asked a similar question recently but now I think I know more about what I really want to know. I can answer my own question if I get to understand this bit. I have a situation where a sprite's center point needs to be constrained within a certain boundary in 2d space. The boundary is circular so the sprite is constrained within a radius. This radius is defined as a distance from the center of a certain point. I know the position of the center point and I can track the center position of the sprite. This is the code to detect the distance: float distance = Vector2.Distance(centerPosition, spritePosition)); if (distance > allowedDistance) { } The positions can be wherever on the grid, they are not described as in between -1 or 1. So basically the detecting code works, it only prints when the sprite is outside of it's boundary I just don't know what to do when it oversteps. Please explain any math used as I really want to understand what you're thinking to be able to elaborate on it myself.

  Read the article

• How do I properly implement zooming in my game?

  - by Rudy_TM

  I'm trying to implement a zoom feature but I have a problem. I am zooming in and out a camera with a pinch gesture, I update the camera each time in the render, but my sprites keep their original position and don't change with the zoom in or zoom out. The Libraries are from libgdx. What am I missing? private void zoomIn() { ((OrthographicCamera)this.stage.getCamera()).zoom += .01; } public boolean pinch(Vector2 arg0, Vector2 arg1, Vector2 arg2, Vector2 arg3) { // TODO Auto-generated method stub zoomIn(); return false; } public void render(float arg0) { this.gl.glClear(GL10.GL_DEPTH_BUFFER_BIT | GL10.GL_COLOR_BUFFER_BIT); ((OrthographicCamera)this.stage.getCamera()).update(); this.stage.draw(); } public boolean touchDown(int arg0, int arg1, int arg2) { this.stage.toStageCoordinates(arg0, arg1, point); Actor actor = this.stage.hit(point.x, point.y); if(actor instanceof Group) { ((LevelSelect)((Group) actor).getActors().get(0)).touched(); } return true; } Zoom In Zoom Out

  Read the article

• how does HDR work?

  - by dotminic

  I'm trying to understand what HDR is and how it works. I understand the basic concepts and have an slight idea of how it is implemented with D3D/hlsl. However it's still pretty foggy. Say I'm rendering a sphere with a texture of the earth and a small point list of vertices to act as stars, how would I render this in HDR ? Here are a few things I'm confused about: I'm guessing, I can't use just any basic image format for the texture as the values would be limited to [0, 255] and clamped to [0, 1] in a shader. Same goes for the back buffer, I take it the format needs to be a float point format ? What are the other steps involved ? Surely there has to be more than just using floating point formats to render to a render target and then apply some bloom as a post process ? (considering the output will be 8bpp anyway) Basically, what are the steps for HDR ? How does it work ? I can't seem to find any good papers / articles that describe the process, other than this one, but it seems to skim over the basics a little, so it's confusing.

  Read the article

• Keep IMAP messages locally when deleted remotely

  - by user74328

  I use my email from my phone and my computer via IMAP. I want to set something up so that if I delete a message via my phone, my computer will still keep the message locally. For example, assume I leave my computer on, with a synchronize interval of 5 minutes. I want to be able to send something from my phone, wait 5 minutes to be sure my computer has downloaded the item from the Sent folder, then delete it from the IMAP sent folder via my phone, but have the computer at home keep it's copy. Is this possible with any readily available email clients out there? I have Thunderbird and Outlook at the moment, but would be willing to learn a new interface for this feature. How can I accomplish this?

  Read the article

• Mount remote drive by port forwarding

  - by Anushka

  I have a windows 7 computer at home and a remote windows XP machine with an external USB drive attached to it. I would like to be able to copy files to and from home/the remote USB drive. The problem is that the only way of contacting the work computer is by first sshing into a different remote linux machine as there is a firewall that prevents direct internet connection. I can see two possible solutions but I don't know how to do them. Set up winscp using ssh port forwarding via the linux box so that I can copy to and from the two windows machines. I assume that I would need to run an ssh server on the XP machine as well to do this? Mounting the remote USB drive on the remote windows machine from the home XP machine via ssh port forwarding again via the linux box. Does anyone know how to do either solution?

  Read the article

• Rotating object around moving object/player in 2D

  - by Boston

  I am trying to implement a camera which rotates around the world around the player. I have found many solutions online to the task of rotating an object about the origin, or about an arbitrary point. The procedure seems to be to translate the point to be rotated about to the origin, perform the rotation, translate back, then draw. I have gotten this working for rotation around the origin as well as for a fixed point. Rotation of objects around the player works as well, provided the player does not move. However, if the objects are rotated around the player by some non-zero degree, if the player moves after the rotation it causes the rotated objects to move as well. I probably have done a poor job explaining this so here's an image: http://i.imgur.com/1n63iWR.gif And here's the code for the behavior: renderx = (Ox - Px)*cos(camAngle) - (Oy - Py)*sin(camAngle) + Px; rendery = (Ox - Px)*sin(camAngle) + (Oy - Py)*cos(camAngle) + Py; Where (Ox,Oy) is the actual position of the object to be rotated and (Px,Py) is the actual position of the player. Any ideas? I am using C++ with SDL2.0.

  Read the article

• Inbox should not contain any calendar appointment

  - by cotablise

  Imagine two users A and B.User B has editor rights on mailbox A via delegation. Delegation settings: User A should not receive any invitation (calendar appointments). All should be routed to user B. It works fine when you are connected to mailbox via Outlook. Problem is that sometimes it does not work when user is connected via his iPhone (he receives calendar appointments in inbox). I know that this feature for MS products and therefore it works on MS Outlook. But user A told me that it worked in the past also on iPhone with user C. Problem is that nowadays it does not work perfectly for user B. Do you have any suggestion please? Thank you in advance.

  Read the article

• Is this one network or two networks?

  - by colemik

  I have this simple question and really don't know the answer. Does the drawing below show one network or two networks? This is a question about the definition of a network from the OSI / TCP/IP model point of view: From one point of view, those are two L2 networks connected with a bridge. From another point of view, this is one L3 network, that can have a common L3 address space (like 10.1.1.0). PS If this question is too dumb, please move it to Superuser.

  Read the article

• is it possible to use multiple proxies for different target websites?

  - by fduff

  Typically I'd like to know if it's possible to have a setup where it maps some IPs with a particular proxy and other IPs using another proxy? Proxy Chaining isn't really what I'm looking for (well I don't think it is) because each address could be resolved with or without a proxy but their content may not be accessible without the right proxy. This setup could be part of home network, so that the relevant proxy s/w could be installed and setup on a Linux box for ex. Ex: website-A via proxy-1 website-B via proxy-2 all others via no-proxy

  Read the article

• Function for building an isosurface (a sphere cut by planes)

  - by GameDevEnthusiast

  I want to build an octree over a quarter of a sphere (for debugging and testing). The octree generator relies on the AIsosurface interface to compute the density and normal at any given point in space. For example, for a full sphere the corresponding code is: // returns <0 if the point is inside the solid virtual float GetDensity( float _x, float _y, float _z ) const override { Float3 P = Float3_Set( _x, _y, _z ); Float3 v = Float3_Subtract( P, m_origin ); float l = Float3_LengthSquared( v ); float d = Float_Sqrt(l) - m_radius; return d; } // estimates the gradient at the given point virtual Float3 GetNormal( float _x, float _y, float _z ) const override { Float3 P = Float3_Set( _x, _y, _z ); float d = this->AIsosurface::GetDensity( P ); float Nx = this->GetDensity( _x + 0.001f, _y, _z ) - d; float Ny = this->GetDensity( _x, _y + 0.001f, _z ) - d; float Nz = this->GetDensity( _x, _y, _z + 0.001f ) - d; Float3 N = Float3_Normalized( Float3_Set( Nx, Ny, Nz ) ); return N; } What is a nice and fast way to compute those values when the shape is bounded by a low number of half-spaces?

  Read the article

• How to get around OS X Lion Server SMB "safe save"?

  - by borrrden

  First, there is this problem: http://support.apple.com/kb/TS4149 Which says that anything copied to os x server via smb will be "safe saved" and essentially chmod to 600. This is extremely annoying and counterproductive to having a share server... I did what the article said, but nothing has changed. It is very vague about how to actually set the ACL permissions, but I think I did that via Server.app - hardware - storage - edit permissions. I added (in addition to other things): Guests - Read & Write Others - Read & Write Actually every entry is read and write, but despite this...it is still chmod to 600 when I try to copy a file via SMB. Where else should I look to solve this madness? Alternatively, how can I get rid of this crappy SMB and put back the original SMB? I tried SMBUp but it just fails to start the service every time...

  Read the article

• Recover snap server data

  - by Ugg

  Hi I have a snap server 110 the machine powers on ok and the healthcheck passes but unable to connect no responce on the assigned ip or any ability to reach the device via the snap server manager. Believe the device is powering on but not loading the OS. Tried pulling the disk running and hooking up to a windows PC via USB, and using disk internals linux reader I am unable to access two of the partitions. ( one of which is the large data partition). There are three partitions on the the drice only one is accessible via Linux reader. I am looking to recover the data of the drive can anyone suggest a DIY option please?

  Read the article

• overloaded stream insertion operator with a vector

  - by Julz

  hi, i'm trying to write an overloaded stream insertion operator for a class who's only member is a vector. i dont really know what i'm doing. (lets make that clear) it's a vector of "Points" which is a struct containing two doubles. i figure what i want is to insert user input (a bunch of doubles) into a stream that i then send to a modifier method? i keep working off other stream insertion examples such as... std::ostream& operator<< (std::ostream& o, Fred const& fred) { return o << fred.i_; } but when i try a similar..... istream & operator >> (istream &inStream, Polygon &vertStr) { inStream >> ws; inStream >> vertStr.vertices; return inStream; } i get an error "no match for operator etc etc. if i leave off the .vertices it compiles but i figure it's not right? (vertices is the name of my vector ) and even if it is right, i dont actually know what syntax to use in my driver to use it? also not %100 on what my modifier method needs to look like. here's my Polygon class //header #ifndef POLYGON_H #define POLYGON_H #include "Segment.h" #include <vector> class Polygon { friend std::istream & operator >> (std::istream &inStream, Polygon &vertStr); public: //Constructor Polygon(const Point &theVerts); //Default Constructor Polygon(); //Copy Constructor Polygon(const Polygon &polyCopy); //Accessor/Modifier methods inline std::vector<Point> getVector() const {return vertices;} //Return number of Vector elements inline int sizeOfVect() const {return (int) vertices.capacity();} //add Point elements to vector inline void setVertices(const Point &theVerts){vertices.push_back (theVerts);} private: std::vector<Point> vertices; }; #endif //Body using namespace std; #include "Polygon.h" // Constructor Polygon::Polygon(const Point &theVerts) { vertices.push_back (theVerts); } //Copy Constructor Polygon::Polygon(const Polygon &polyCopy) { vertices = polyCopy.vertices; } //Default Constructor Polygon::Polygon(){} istream & operator >> (istream &inStream, Polygon &vertStr) { inStream >> ws; inStream >> vertStr; return inStream; } any help greatly appreciated, sorry to be so vague, a lecturer has just kind of given us a brief example of stream insertion then left us on our own thanks. oh i realise there are probably many other problems that need fixing

  Read the article

• Any tool to make git build every commit to a branch in a seperate repository?

  - by Wayne

  A git tool that meets the specs below is needed. Does one already exists? If not, I will create a script and make it available on GitHub for others to use or contribute. Is there a completely different and better way to solve the need to build/test every commit to a branch in a git repository? Not just to the latest but each one back to a certain staring point. Background: Our development environment uses a separate continuous integration server which is wonderful. However, it is still necessary to do full builds locally on each developer's PC to make sure the commit won't "break the build" when pushed to the CI server. Unfortunately, with auto unit tests, those build force the developer to wait 10 or 15 minutes for a build every time. To solve this we have setup a "mirror" git repository on each developer PC. So we develop in the main repository but anytime a local full build is needed. We run a couple commands in a in the mirror repository to fetch, checkout the commit we want to build, and build. It's works extremely lovely so we can continue working in the main one with the build going in parallel. There's only one main concern now. We want to make sure every single commit builds and tests fine. But we often get busy and neglect to build several fresh commits. Then if it the build fails you have to do a bisect or manually figure build each interim commit to figure out which one broke. Requirements for this tool. The tool will look at another repo, origin by default, fetch and compare all commits that are in branches to 2 lists of commits. One list must hold successfully built commits and the other lists commits that failed. It identifies any commit or commits not yet in either list and begins to build them in a loop in the order that they were committed. It stops on the first one that fails. The tool appropriately adds each commit to either the successful or failed list after it as attempted to build each one. The tool will ignore any "legacy" commits which are prior to the oldest commit in the success list. This logic makes the starting point possible in the next point. Starting Point. The tool building a specific commit so that, if successful it gets added to the success list. If it is the earliest commit in the success list, it becomes the "starting point" so that none of the commits prior to that are examined for builds. Only linear tree support? Much like bisect, this tool works best on a commit tree which is, at least from it's starting point, linear without any merges. That is, it should be a tree which was built and updated entirely via rebase and fast forward commits. If it fails on one commit in a branch it will stop without building the rest that followed after that one. Instead if will just move on to another branch, if any. The tool must do these steps once by default but allow a parameter to loop with an option to set how many seconds between loops. Other tools like Hudson or CruiseControl could do more fancy scheduling options. The tool must have good defaults but allow optional control. Which repo? origin by default. Which branches? all of them by default. What tool? by default an executable file to be provided by the user named "buildtest", "buildtest.sh" "buildtest.cmd", or buildtest.exe" in the root folder of the repository. Loop delay? run once by default with option to loop after a number of seconds between iterations.

  Read the article

• How to use Boost 1.41.0 graph layout algorithmes

  - by daniil-k

  Hi I have problem using boost graph layout algorithmes. boost verision 1_41_0 mingw g++ 4.4.0. So there are issues I have encountered Can you suggest me with them? The function fruchterman_reingold_force_directed_layout isn't compiled. The kamada_kawai_spring_layout compiled but program crashed. Boost documentation to layout algorithms is wrong, sample to fruchterman_reingold_force_directed_layout isn't compiled. This is my example. To use function just uncomment one. String 60, 61, 63. #include <boost/config.hpp> #include <boost/graph/adjacency_list.hpp> #include <boost/graph/graph_utility.hpp> #include <boost/graph/simple_point.hpp> #include <boost/property_map/property_map.hpp> #include <boost/graph/circle_layout.hpp> #include <boost/graph/fruchterman_reingold.hpp> #include <boost/graph/kamada_kawai_spring_layout.hpp> #include <iostream> //typedef boost::square_topology<>::point_difference_type Point; typedef boost::square_topology<>::point_type Point; struct VertexProperties { std::size_t index; Point point; }; struct EdgeProperty { EdgeProperty(const std::size_t &w):weight(w) {} double weight; }; typedef boost::adjacency_list<boost::listS, boost::listS, boost::undirectedS, VertexProperties, EdgeProperty > Graph; typedef boost::property_map<Graph, std::size_t VertexProperties::*>::type VertexIndexPropertyMap; typedef boost::property_map<Graph, Point VertexProperties::*>::type PositionMap; typedef boost::property_map<Graph, double EdgeProperty::*>::type WeightPropertyMap; typedef boost::graph_traits<Graph>::vertex_descriptor VirtexDescriptor; int main() { Graph graph; VertexIndexPropertyMap vertexIdPropertyMap = boost::get(&VertexProperties::index, graph); for (int i = 0; i < 3; ++i) { VirtexDescriptor vd = boost::add_vertex(graph); vertexIdPropertyMap[vd] = i + 2; } boost::add_edge(boost::vertex(1, graph), boost::vertex(0, graph), EdgeProperty(5), graph); boost::add_edge(boost::vertex(2, graph), boost::vertex(0, graph), EdgeProperty(5), graph); std::cout << "Vertices\n"; boost::print_vertices(graph, vertexIdPropertyMap); std::cout << "Edges\n"; boost::print_edges(graph, vertexIdPropertyMap); PositionMap positionMap = boost::get(&VertexProperties::point, graph); WeightPropertyMap weightPropertyMap = boost::get(&EdgeProperty::weight, graph); boost::circle_graph_layout(graph, positionMap, 100); // boost::fruchterman_reingold_force_directed_layout(graph, positionMap, boost::square_topology<>()); boost::kamada_kawai_spring_layout(graph, positionMap, weightPropertyMap, boost::square_topology<>(), boost::side_length<double>(10), boost::layout_tolerance<>(), 1, vertexIdPropertyMap); std::cout << "Coordinates\n"; boost::graph_traits<Graph>::vertex_iterator i, end; for (boost::tie(i, end) = boost::vertices(graph); i != end; ++i) { std::cout << "ID: (" << vertexIdPropertyMap[*i] << ") x: " << positionMap[*i][0] << " y: " << positionMap[*i][1] << "\n"; } return 0; }

  Read the article

• setTimeout in javascript not giving browser 'breathing room'

  - by C Bauer

  Alright, I thought I had this whole setTimeout thing perfect but I seem to be horribly mistaken. I'm using excanvas and javascript to draw a map of my home state, however the drawing procedure chokes the browser. Right now I'm forced to pander to IE6 because I'm in a big organisation, which is probably a large part of the slowness. So what I thought I'd do is build a procedure called distributedDrawPolys (I'm probably using the wrong word there, so don't focus on the word distributed) which basically pops the polygons off of a global array in order to draw 50 of them at a time. This is the method that pushes the polygons on to the global array and runs the setTimeout: for (var x = 0; x < polygon.length; x++) { coordsObject.push(polygon[x]); fifty++; if (fifty > 49) { timeOutID = setTimeout(distributedDrawPolys, 5000); fifty = 0; } } I put an alert at the end of that method, it runs in practically a second. The distributed method looks like: function distributedDrawPolys() { if (coordsObject.length > 0) { for (x = 0; x < 50; x++) { //Only do 50 polygons var polygon = coordsObject.pop(); var coordinate = polygon.selectNodes("Coordinates/point"); var zip = polygon.selectNodes("ZipCode"); var rating = polygon.selectNodes("Score"); if (zip[0].text.indexOf("HH") == -1) { var lastOriginCoord = []; for (var y = 0; y < coordinate.length; y++) { var point = coordinate[y]; latitude = shiftLat(point.getAttribute("lat")); longitude = shiftLong(point.getAttribute("long")); if (y == 0) { lastOriginCoord[0] = point.getAttribute("long"); lastOriginCoord[1] = point.getAttribute("lat"); } if (y == 1) { beginPoly(longitude, latitude); } if (y > 0) { if (translateLongToX(longitude) > 0 && translateLongToX(longitude) < 800 && translateLatToY(latitude) > 0 && translateLatToY(latitude) < 600) { drawPolyPoint(longitude, latitude); } } } y = 0; if (zip[0].text != targetZipCode) { if (rating[0] != null) { if (rating[0].text == "Excellent") { endPoly("rgb(0,153,0)"); } else if (rating[0].text == "Good") { endPoly("rgb(153,204,102)"); } else if (rating[0].text == "Average") { endPoly("rgb(255,255,153)"); } } else { endPoly("rgb(255,255,255)"); } } else { endPoly("rgb(255,0,0)"); } } } } Ugh I don't know if that is properly formatted, I ended up with an extra bracket < So I thought the setTimeout method would allow the site to draw the polygons in groups so the users would be able to interact with the page while it was still drawing. What am I doing wrong here?

  Read the article

• Why isn't my algorithm for find the biggest and smallest inputs working?

  - by Matt Ellen

  I have started a new job, and with it comes a new language: Ironpython. Thankfully a good language :D Before starting I got to grips with Python on the whole, but that was only a week's worth of learning. Now I'm writing actual code. I've been charged with writing an algorithm that finds the best input parameter to collect data with. The basic algorithm is (as I've been instructed): Set the input parameter to a good guess Start collecting data When data is available stop collecting find the highest point If the point before this (i.e. for the previous parameter value) was higher and the point before that was lower then we've found the max otherwise the input parameter is increased by the initial guess. goto 2 If the max is found then the min needs to be found. To do this the algorithm carries on increasing the input, but by 1/10 of the max, until the current point is greater than the previous point and the point before that is also greater. Once the min is found then the algorithm stops. Currently I have a simplified data generator outputting the sin of the input, so that I know that the min value should be PI and the max value should be PI/2 The main Python code looks like this (don't worry, this is just for my edification, I don't write real code like this): import sys sys.path.append(r"F:\Programming Source\C#\PythonHelp\PythonHelp\bin\Debug") import clr clr.AddReferenceToFile("PythonHelpClasses.dll") import PythonHelpClasses from PHCStruct import Helper from System import Math helper = Helper() def run(): b = PythonHelpClasses.Executor() a = PythonHelpClasses.HasAnEvent() b.Input = 0.0 helper.__init__() def AnEventHandler(e): b.Stop() h = helper h.lastLastVal, h.lastVal, h.currentVal = h.lastVal, h.currentVal, e.Number if h.lastLastVal < h.lastVal and h.currentVal < h.lastVal and h.NotPast90: h.NotPast90 = False h.bestInput = h.lastInput inputInc = 0.0 if h.NotPast90: inputInc = Math.PI/10.0 else: inputInc = h.bestInput/10.0 if h.lastLastVal > h.lastVal and h.currentVal > h.lastVal and h.NotPast180: h.NotPast180 = False if h.NotPast180: h.lastInput, b.Input = b.Input, b.Input + inputInc b.Start(a) else: print "Best input:", h.bestInput print "Last input:", h.lastInput b.Stop() a.AnEvent += AnEventHandler b.Start(a) PHCStruct.py: class Helper(): def __init__(self): self.currentVal = 0 self.lastVal = 0 self.lastLastVal = 0 self.NotPast90 = True self.NotPast180 = True self.bestInput = 0 self.lastInput = 0 PythonHelpClasses has two small classes I wrote in C# before I realised how to do it in Ironpython. Executor runs a delegate asynchronously while it's running member is true. The important code: public void Start(HasAnEvent hae) { running = true; RunDelegate r = new RunDelegate(hae.UpdateNumber); AsyncCallback ac = new AsyncCallback(UpdateDone); IAsyncResult ar = r.BeginInvoke(Input, ac, null); } public void Stop() { running = false; } public void UpdateDone(IAsyncResult ar) { RunDelegate r = (RunDelegate)((AsyncResult)ar).AsyncDelegate; r.EndInvoke(ar); if (running) { AsyncCallback ac = new AsyncCallback(UpdateDone); IAsyncResult ar2 = r.BeginInvoke(Input, ac, null); } } HasAnEvent has a function that generates the sin of its input and fires an event with that result as its argument. i.e.: public void UpdateNumber(double val) { AnEventArgs e = new AnEventArgs(Math.Sin(val)); System.Threading.Thread.Sleep(1000); if (null != AnEvent) { AnEvent(e); } } The sleep is in there just to slow things down a bit. The problem I am getting is that the algorithm is not coming up with the best input being PI/2 and the final input being PI, but I can't see why. Also the best and final inputs are different each time I run the programme. Can anyone see why? Also when the algorithm terminates the best and final inputs are printed to the screen multiple times, not just once. Can someone explain why?

  Read the article

• overloaded stream insetion operator with a vector

  - by julz666

  hi, i'm trying to write an overloaded stream insertion operator for a class who's only member is a vector. i dont really know what i'm doing. (lets make that clear) it's a vector of "Points" which is a struct containing two doubles. i figure what i want is to insert user input (a bunch of doubles) into a stream that i then send to a modifier method? i keep working off other stream insertion examples such as... std::ostream& operator<< (std::ostream& o, Fred const& fred) { return o << fred.i_; } but when i try a similar..... istream & operator >> (istream &inStream, Polygon &vertStr) { inStream >> ws; inStream >> vertStr.vertices; return inStream; } i get an error "no match for operator etc etc. if i leave off the .vertices it compiles but i figure it's not right? (vertices is the name of my vector ) and even if it is right, i dont actually know what syntax to use in my driver to use it? also not %100 on what my modifier method needs to look like. here's my Polygon class //header #ifndef POLYGON_H #define POLYGON_H #include "Segment.h" #include <vector> class Polygon { friend std::istream & operator >> (std::istream &inStream, Polygon &vertStr); public: //Constructor Polygon(const Point &theVerts); //Default Constructor Polygon(); //Copy Constructor Polygon(const Polygon &polyCopy); //Accessor/Modifier methods inline std::vector<Point> getVector() const {return vertices;} //Return number of Vector elements inline int sizeOfVect() const {return (int) vertices.capacity();} //add Point elements to vector inline void setVertices(const Point &theVerts){vertices.push_back (theVerts);} private: std::vector<Point> vertices; }; #endif //Body using namespace std; #include "Polygon.h" // Constructor Polygon::Polygon(const Point &theVerts) { vertices.push_back (theVerts); } //Copy Constructor Polygon::Polygon(const Polygon &polyCopy) { vertices = polyCopy.vertices; } //Default Constructor Polygon::Polygon(){} istream & operator >> (istream &inStream, Polygon &vertStr) { inStream >> ws; inStream >> vertStr; return inStream; } any help greatly appreciated, sorry to be so vague, a lecturer has just kind of given us a brief example of stream insertion then left us on our own thanks. oh i realise there are probably many other problems that need fixing

  Read the article

• web application with secured sections, sessions and related trouble

  - by spirytus

  I would like to create web application with admin/checkout sections being secured. Assuming I have SSL set up for subdomain.mydomain.com I would like to make sure that all that top-secret stuff ;) like checkout pages and admin section is transferred securely. Would it be ok to structure my application as below? subdomain.mydomain.com adminSectionFolder adminPage1.php adminPage2.php checkoutPagesFolder checkoutPage1.php checkoutPage2.php checkoutPage3.php homepage.php loginPage.php someOtherPage.php someNonSecureFolder nonSecurePage1.php nonSecurePage2.php nonSecurePage3.php imagesFolder image1.jpg image2.jpg image3.jpg Users would access my web application via http as there is no need for SSL for homepage and similar. Checkout/admin pages would have to be accessed via https though (that I would ensure via .htaccess redirects). I would also like to have login form on every page of the site, including non-secure pages. Now my questions are: if I have form on non-secure page e.g http://subdomain.mydomain.com/homepage.php and that form sends data to http://subdomain.mydomain.com/loginPage.php, is data being send encrypted as if it were sent from https://subdomain.mydomain.com/homepage.php? I do realize users will not see padlock, but browser still should encrypt it, is it right? If on secure page loginPage.php (or any other accessed via https for that instance) I created session, session ID would be assigned, and in case of my web app. something like username of the logged in user. Would I be able to access these session variable from http://subdomain.mydomain.com/homepage.php to for example display greeting message? If session ID is stored in cookies then it would be trouble I assume, but could someone clarify how it should be done? It seems important to have username and password send over SSL. Related to above question I think.. would it actually make any sense to have login secured via SSL so usenrame/password would be transferred securely, and then session ID being transferred with no SSL? I mean wouldnt it be the same really if someone caught username and password being transferred, or caught session ID? Please let me know if I make sense here cause it feels like I'm missing something important. EDIT: I came up with idea but again please let me know if that would work. Having above, so assuming that sharing session between http and https is as secure as login in user via plain http (not https), I guess on all non secure pages, like homepage etc. I could check if user is already logged in, and if so from php redirect to https version of same page. So user fills in login form from homepage.php, over ssl details are send to backend so probably https://.../homepage.php. Trying to access http://.../someOtherPage.php script would always check if session is created and if so redirect user to https version of this page so https://.../someOtherPage.php. Would that work? 4.To avoid browser popping message "this page contains non secure items..." my links to css, images and all assets, e.g. in case of http://subdomain.mydomain.com/checkoutPage1.php should be absolute so "/images/image1.jpg" or relative so "../images/image1.jpg"? I guess one of those would have to work :) wow that's long post, thanks for your patience if you got that far and any answers :) oh yeh and I use php/apache on shared hosting

  Read the article

• Memory management in iphone cocos2d

  - by muthu

  i am iphone developer very new to this field....i am developing a ebook app in iphone using cocos2d...i use more than 150 images(i guess) the problem while turning from one page to another images get hanged randomly...... i tried this also [[TextureMgr sharedTextureMgr] removeAllTextures]; but went in vain...i guess the the problem is with the memory.....this my coding for all the pages -(id)init { if( (self=[super init] )) { self.isTouchEnabled = YES; [SimpleAudioEngine sharedEngine]; NSLog(@"b4 cover"); Sprite *bg1 = [Sprite spriteWithFile:@"a.jpg"]; bg1.anchorPoint = CGPointZero; [self addChild:bg1 z:-1]; once = TRUE; soundId = [[SimpleAudioEngine sharedEngine] playEffect:@".mp3"]; } return self; } -(void) transitionfront:(id) sender { [[SimpleAudioEngine sharedEngine] stopEffect:soundId]; soundId1 = [[SimpleAudioEngine sharedEngine] playEffect:@"page_turn.mp3"]; flip = [[Sprite spriteWithFile:@"a.jpg"] retain]; [self addChild: flip z:1]; [flip setPosition:ccp(160,240)]; Animation* animation1 = [Animation animationWithName:@"Page1" delay:0.09]; for( int i=1;i<4;i++) [animation1 addFrameWithFilename: [NSString stringWithFormat:@".jpg", i]]; id action = [Animate actionWithAnimation: animation1]; //id action = [RepeatForever actionWithAction:[Animate actionWithAnimation: animation1]]; [flip runAction:action]; [NSTimer scheduledTimerWithTimeInterval:0.3 target:self selector:@selector(moveforward) userInfo:nil repeats:NO]; } -(void) moveforward { [[SimpleAudioEngine sharedEngine] stopEffect:soundId1]; [[Director sharedDirector] replaceScene: [ [Scene node] addChild: [nextpage node] z:0] ]; } -(void) transitionback:(id) sender { [[SimpleAudioEngine sharedEngine] stopEffect:soundId]; soundId1 = [[SimpleAudioEngine sharedEngine] playEffect:@".mp3"]; flip = [[Sprite spriteWithFile:@".jpg"] retain]; [self addChild: flip z:1]; [flip setPosition:ccp(160,240)]; Animation* animation1 = [Animation animationWithName:@"Page1" delay:0.09]; for( int i=3;i>0;i--) [animation1 addFrameWithFilename: [NSString stringWithFormat:@".jpg", i]]; id action = [Animate actionWithAnimation: animation1]; //id action = [RepeatForever actionWithAction:[Animate actionWithAnimation: animation1]]; [flip runAction:action]; [NSTimer scheduledTimerWithTimeInterval:0.3 target:self selector:@selector(movebackward) userInfo:nil repeats:NO]; } -(void) movebackward{ //[[SimpleAudioEngine sharedEngine]stopEffect:@".mp3"]; [[Director sharedDirector]replaceScene:[[Scene node]addChild:[b4page node] z:0]]; } -(void) glossary :(id) sender { [[SimpleAudioEngine sharedEngine]stopEffect:soundId]; [[Director sharedDirector]replaceScene:[[Scene node]addChild:[ node] z:0]]; } -(BOOL)ccTouchesEnded:(NSSet *)touches withEvent:(UIEvent *)event { UITouch *touch = [touches anyObject]; CGPoint cocosTouchPoint = [touch locationInView: [touch view]]; CGPoint point = [[Director sharedDirector] convertToGL:cocosTouchPoint]; NSLog(@"pointx: %f pointy:%f", point.x, point.y); // Was a tab touched, if so, which one... if (CGRectContainsPoint(CGRectMake(220, 0, 100, 70), point)) { if(once) { NSLog(@"enterred page1"); [self transitionfront:nil]; once = FALSE; } } if (CGRectContainsPoint(CGRectMake(0,0,60,60), point)) { if(once) { NSLog(@"enterred cover"); [self transitionback:nil]; once = FALSE; } } if (CGRectContainsPoint(CGRectMake(100, 15, 30, 30), point)) { if(once){ [self glossary :nil]; once = FALSE; } } return kEventHandled; } -(void)playEffect:(NSString*)sound{ if(effectPlayer!=nil){ [effectPlayer release]; } NSURL *url = [NSURL fileURLWithPath:[[NSBundle mainBundle] pathForResource:sound ofType:@"mp3"]]; effectPlayer = [[AVAudioPlayer alloc] initWithContentsOfURL:url error:nil]; [effectPlayer setDelegate:self]; [effectPlayer play]; } -(void)stopEffect { [effectPlayer stop]; } -(void) dealloc{ [super dealloc]; } do pls help me........ do give me a exact coding this is the err..... *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '*** -[NSCFDictionary setObject:forKey:]: attempt to insert nil value (key: aesop.mp3)' 2010-05-27 10:43:09.834 abc[276:20b] Stack: ( 11674715, 2476006971, 11758651, 11758490, 5126917, 660698, 660881, 661061, 131577, 448857, 120432, 153433, 630890, 23694899, 23603228, 23630005, 47120081, 11459456, 11455560, 47114125, 47114322, 23633923, 9928, 9814 )

  Read the article

< Previous Page | 191 192 193 194 195 196 197 198 199 200 201 202  | Next Page >