Search Results

Search found 5291 results on 212 pages for 'disable'.

Page 196/212 | < Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >

• Web Interfaces not opening even after Port Forwarding is said to be working!

  - by Ahmad

  I'm encountering this strange problem which has baffled me to the ground, and which I haven't encountered even after years of doing port forwarding .. ! I am hoping somebody here can help me solve this mystery .. :) My network configuration is as follows: I have a DSL modem (custom made and branded by my ISP) which is receiving a DSL stream ... it has an external IP which is visible to the world, say, 11.22.33.44 ... This modem has DHCP enabled, has an internal IP for itself, which is 192.168.1.1 .. it is connected to 2 laptops via and ethernet cable .. Laptop 1 has IP 192.168.1.2, and Laptop 2 has IP 192.168.1.3 ... On Laptop 1, two applications are running, jDownloader and Media Player Classic, which have their web interfaces on ports 8765 and 13579, respectively ... I can access both of these web interfaces from Laptop 2 by opening these addresses: 192.1681.2:8765 and 192.168.1.2:13579 ... both of their web interfaces open up, meaning the web interfaces are working fine .. Moving on, I now want to access these web interfaces from outside my network as well, and so I've configured port forwarding in my PTCL modem to forward all traffic on ports between 8000 and 14000 (both TCP and UDP) to IP 192.168.1.2 ... I have verified that port forwarding is working by testing it using PortForward.com's port checker tool, and this website too: [URL]http://www.yougetsignal.com/tools/open-ports/[/URL] When I use the website, if I'm running the applications on Laptop 2, the website reports that the port is open .. if I then close the application, the website reports the port is closed ... This makes sense as nothing is listening on my machine in the latter case .. Also, if I disable port forwarding in my modem, again, the website reports the port is closed ... so, the website's results seem to be okay ... Same of the above can be said when I'm used PortForward.com's port checker tool ... So again, everything okay so far ... Now, here comes the problem !! ... Despite the above tools reporting that port forwarding is working, I am unable to open the web interfaces from outside my network ... So for example, if I tried to browse 11.22.33.44:8765 or 11.22.33.44:13579, nothing opens in my browser ... But if I accessed these web server's locally from Laptop 3, by typing in 192.168.1.2:8765 or 192.168.1.2:13579, they opened ... So where is the problem here ?? The tools report unanimously that port forwarding is working, and yet I am unable to open the web interfaces from outside the network .. Also note that I have disabled the firewall from my computer, and have also made sure that any option in the above programs (whose web interfaces I am trying to open) that says only local connections are to be accepted, is disabled ... So whats the problem ... ?!! Any ideas ??

  Read the article

• How to place SuperFetch cache on an SSD?

  - by Ian Boyd

  I'm thinking of adding a solid state drive (SSD) to my existing Windows 7 installation. I know I can (and should) move my paging file to the SSD: Should the pagefile be placed on SSDs? Yes. Most pagefile operations are small random reads or larger sequential writes, both of which are types of operations that SSDs handle well. In looking at telemetry data from thousands of traces and focusing on pagefile reads and writes, we find that Pagefile.sys reads outnumber pagefile.sys writes by about 40 to 1, Pagefile.sys read sizes are typically quite small, with 67% less than or equal to 4 KB, and 88% less than 16 KB. Pagefile.sys writes are relatively large, with 62% greater than or equal to 128 KB and 45% being exactly 1 MB in size. In fact, given typical pagefile reference patterns and the favorable performance characteristics SSDs have on those patterns, there are few files better than the pagefile to place on an SSD. What I don't know is if I even can put a SuperFetch cache (i.e. ReadyBoost cache) on the solid state drive. I want to get the benefit of Windows being able to cache gigabytes of frequently accessed data on a relativly small (e.g. 30GB) solid state drive. This is exactly what SuperFetch+ReadyBoost (or SuperFetch+ReadyDrive) was designed for. Will Windows offer (or let) me place a ReadyBoost cache on a solid state flash drive connected via SATA? A problem with the ReadyBoost cache over the ReadyDrive cache is that the ReadyBoost cache does not survive between reboots. The cache is encrypted with a per-session key, making its existing contents unusable during boot and SuperFetch pre-fetching during login. Update One I know that Windows Vista limited you to only one ReadyBoost.sfcache file (I do not know if Windows 7 removed that limitation): Q: Can use use multiple devices for EMDs? A: Nope. We've limited Vista to one ReadyBoost per machine Q: Why just one device? A: Time and quality. Since this is the first revision of the feature, we decided to focus on making the single device exceptional, without the difficulties of managing multiple caches. We like the idea, though, and it's under consideration for future versions. I also know that the 4GB limit on the cache file was a limitation of the FAT filesystem used on most USB sticks - an SSD drive would be formatted with NTFS: Q: What's the largest amount of flash that I can use for ReadyBoost? A: You can use up to 4GB of flash for ReadyBoost (which turns out to be 8GB of cache w/ the compression) Q: Why can't I use more than 4GB of flash? A: The FAT32 filesystem limits our ReadyBoost.sfcache file to 4GB Can a ReadyBoost cache on an NTFS volume be larger than 4GB? Update Two The ReadyBoost cache is encrypted with a per-boot session key. This means that the cache has to be re-built after each boot, and cannot be used to help speed boot times, or latency from login to usable. Windows ReadyDrive technology takes advantage of non-volatile (NV) memory (i.e. flash) that is incorporated with some hybrid hard drives. This flash cache can be used to help Windows boot, or resume from hibernate faster. Will Windows 7 use an internal SSD drive as a ReadyBoost/*ReadyDrive*/SuperFetch cache? Is it possible to make Windows store a SuperFetch cache (i.e. ReadyBoost) on a non-removable SSD? Is it possible to not encrypt the ReadyBoost cache, and if so will Windows 7 use the cache at boot time? See also SuperUser.com: ReadyBoost + SSD = ? Windows 7 - ReadyBoost & SSD drives? Support and Q&A for Solid-State Drives Using SDD as a cache for HDD, is there a solution? Performance increase using SSD for paging/fetch/cache or ReadyBoost? (Win7) Windows 7 To Boost SSD Performance How to Disable Nonvolatile Caching

  Read the article

• "Possible SYN flooding" in log despite low number of SYN_RECV connections

  - by al4

  Recently we had an apache server which was responding very slowly due to SYN flooding. The workaround for this was to enable tcp_syncookies (net.ipv4.tcp_syncookies=1 in /etc/sysctl.conf). I posted a question about this here if you want more background. After enabling syncookies we started seeing the following message in /var/log/messages approximately every 60 seconds: [84440.731929] possible SYN flooding on port 80. Sending cookies. Vinko Vrsalovic informed me that this means the syn backlog is getting full, so I raised tcp_max_syn_backlog to 4096. At some point I also lowered tcp_synack_retries to 3 (down from the default of 5) by issuing sysctl -w net.ipv4.tcp_synack_retries=3. After doing this, the frequency seemed to drop, with the interval of the messages varying between roughly 60 and 180 seconds. Next I issued sysctl -w net.ipv4.tcp_max_syn_backlog=65536, but am still getting the message in the log. Throughout all this I've been watching the number of connections in SYN_RECV state (by running watch --interval=5 'netstat -tuna |grep "SYN_RECV"|wc -l'), and it never goes higher than about 240, much much lower than the size of the backlog. Yet I have a Red Hat server which hovers around 512 (limit on this server is the default of 1024). Are there any other tcp settings which would limit the size of the backlog or am I barking up the wrong tree? Should the number of SYN_RECV connections in netstat -tuna correlate to the size of the backlog? Update As best I can tell I'm dealing with legitimate connections here, netstat -tuna|wc -l hovers around 5000. I've been researching this today and found this post from a last.fm employee, which has been rather useful. I've also discovered that the tcp_max_syn_backlog has no effect when syncookies are enabled (as per this link) So as a next step I set the following in sysctl.conf: net.ipv4.tcp_syn_retries = 3 # default=5 net.ipv4.tcp_synack_retries = 3 # default=5 net.ipv4.tcp_max_syn_backlog = 65536 # default=1024 net.core.wmem_max = 8388608 # default=124928 net.core.rmem_max = 8388608 # default=131071 net.core.somaxconn = 512 # default = 128 net.core.optmem_max = 81920 # default = 20480 I then setup my response time test, ran sysctl -p and disabled syncookies by sysctl -w net.ipv4.tcp_syncookies=0. After doing this the number of connections in the SYN_RECV state still remained around 220-250, but connections were starting to delay again. Once I noticed these delays I re-enabled syncookies and the delays stopped. I believe what I was seeing was still an improvement from the initial state, however some requests were still delayed which is much worse than having syncookies enabled. So it looks like I'm stuck with them enabled until we can get some more servers online to cope with the load. Even then, I'm not sure I see a valid reason to disable them again as they're only sent (apparently) when the server's buffers get full. But the syn backlog doesn't appear to be full with only ~250 connections in the SYN_RECV state! Is it possible that the SYN flooding message is a red herring and it's something other than the syn_backlog that's filling up? If anyone has any other tuning options I haven't tried yet I'd be more than happy to try them out, but I'm starting to wonder if the syn_backlog setting isn't being applied properly for some reason.

  Read the article

• SQL2008R2 install issues on windows 7 - unable to install setup support files?

  - by Liam

  I am trying to install the above but am getting the following errors when its attempting to install the setup support files, This is the first error that occurs during installation of the setup support files TITLE: Microsoft SQL Server 2008 R2 Setup ------------------------------ The following error has occurred: The installer has encountered an unexpected error. The error code is 2337. Could not close file: Microsoft.SqlServer.GridControl.dll GetLastError: 0. Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup. For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1&EvtType=0xDF039760%25401201%25401 This is the second error that occurs after clicking continue in the installer after the first error is generated TITLE: Microsoft SQL Server 2008 R2 Setup ------------------------------ The following error has occurred: SQL Server Setup has encountered an error when running a Windows Installer file. Windows Installer error message: The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance. Windows Installer file: C:\Users\watto_uk\Desktop\In-Digital\Software\Microsoft\SQL Server 2008 R2\1033_ENU_LP\x64\setup\sqlsupport_msi\SqlSupport.msi Windows Installer log file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110713_205508\SqlSupport_Cpu64_1_ComponentUpdate.log Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup. For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1&EvtType=0xDC80C325 These errors are generated from an ISO package downloaded from Microsoft. I have also tried using the web platform installer to install the express version instead but the SQL Server Installation fails with that also. The management studio installs fine but not the server. I have checked to make sure that the Windows Installer is started and it is. Cant seem to find an answer for this anywhere as all previous reported issues appear to be related to XP. I did have the express edition installed on the machine previously but uninstalled it to upgrade to the full version, I wish I hadn't now. Can anyone kindly offer any advice or point me in the right direction to stop me going insane with this? Any advice will be appreciated. Update======================= After digging a bit deeper ive located details of the error from the setup log file, i can also upload the log file if required. MSI (s) (E8:28) [23:35:18:705]: Assembly Error:The module '%1' was expected to contain an assembly manifest. MSI (s) (E8:28) [23:35:18:705]: Note: 1: 1935 2: 3: 0x80131018 4: IStream 5: Commit 6: MSI (s) (E8:28) [23:35:18:705]: Note: 1: 2337 2: 0 3: Microsoft.SqlServer.GridControl.dll MSI (s) (E8:28) [23:35:22:869]: Product: Microsoft SQL Server 2008 R2 Setup (English) -- Error 2337. The installer has encountered an unexpected error. The error code is 2337. Could not close file: Microsoft.SqlServer.GridControl.dll GetLastError: 0. MSI (s) (E8:28) [23:35:22:916]: Internal Exception during install operation: 0xc0000005 at 0x000007FEE908A23E. MSI (s) (E8:28) [23:35:22:916]: WER report disabled for silent install. MSI (s) (E8:28) [23:35:22:932]: Internal MSI error. Installer terminated prematurely. Error 2337. The installer has encountered an unexpected error. The error code is 2337. Could not close file: Microsoft.SqlServer.GridControl.dll GetLastError: 0. MSI (s) (E8:28) [23:35:22:932]: MainEngineThread is returning 1603 MSI (s) (E8:58) [23:35:22:932]: RESTART MANAGER: Session closed. Installer stopped prematurely. MSI (c) (0C:14) [23:35:22:947]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1 MSI (c) (0C:14) [23:35:22:947]: MainEngineThread is returning 1601 === Verbose logging stopped: 13/07/2011 23:35:22 ===

  Read the article

• ScriptAlias makes requests match too many Location blocks. What is going on?

  - by brain99

  We wish to restrict access on our development server to those users who have a valid SSL Client certificate. We are running Apache 2.2.16 on Debian 6. However, for some sections (mainly git-http, setup with gitolite on https://my.server/git/) we need an exception since many git clients don't support SSL client certificates. I have succeeded in requiring client cert authentication for the server, and in adding exceptions for some locations. However, it seems this does not work for git. The current setup is as follows: SSLCACertificateFile ssl-certs/client-ca-certs.crt <Location /> SSLVerifyClient require SSLVerifyDepth 2 </Location> # this works <Location /foo> SSLVerifyClient none </Location> # this does not <Location /git> SSLVerifyClient none </Location> I have also tried an alternative solution, with the same results: # require authentication everywhere except /git and /foo <LocationMatch "^/(?!git|foo)"> SSLVerifyClient require SSLVerifyDepth 2 </LocationMatch> In both these cases, a user without client certificate can perfectly access my.server/foo/, but not my.server/git/ (access is refused because no valid client certificate is given). If I disable SSL client certificate authentication completely, my.server/git/ works ok. The ScriptAlias problem Gitolite is setup using the ScriptAlias directive. I have found that the problem occurs with any similar ScriptAlias: # Gitolite ScriptAlias /git/ /path/to/gitolite-shell/ ScriptAlias /gitmob/ /path/to/gitolite-shell/ # My test ScriptAlias /test/ /path/to/test/script/ Note that /path/to/test/script is a file, not a directory, the same goes for /path/to/gitolite-shell/ My test script simply prints out the environment, super simple: #!/usr/bin/perl print "Content-type:text/plain\n\n"; print "TEST\n"; @keys = sort(keys %ENV); foreach (@keys) { print "$_ => $ENV{$_}\n"; } It seems that if I go to https://my.server/test/someLocation, that any SSLVerifyClient directives are being applied which are in Location blocks that match /test/someLocation or just /someLocation. If I have the following config: <LocationMatch "^/f"> SSLVerifyClient require SSLVerifyDepth 2 </LocationMatch> Then, the following URL requires a client certificate: https://my.server/test/foo. However, the following URL does not: https://my.server/test/somethingElse/foo Note that this only seems to apply for SSL configuration. The following has no effect whatsoever on https://my.server/test/foo: <LocationMatch "^/f"> Order allow,deny Deny from all </LocationMatch> However, it does block access to https://my.server/foo. This presents a major problem for cases where I have some project running at https://my.server/project (which has to require SSL client certificate authorization), and there is a git repository for that project at https://my.server/git/project which cannot require a SSL client certificate. Since the /git/project URL also gets matched agains /project Location blocks, such a configuration seems impossible given my current findings. Question: Why is this happening, and how do I solve my problem? In the end, I want to require SSL Client certificate authorization for the whole server except for /git and /someLocation, with as minimal configuration as possible (so I don't have to modify the configuration each time something new is deployed or a new git repository is added). Note: I rewrote my question (instead of just adding more updates at the bottom) to take into account my new findings and hopefully make this more clear.

  Read the article

• Supermicro IPMI on MBD-X8DAH+-F-O motherboard. Keyboard and mouse do not work after booting Windows Server 2008 R2

  - by LDelgado

  Hell Everyone, I built a server with the mentioned motherboard. I installed Windows Server 2008 R2 Enterprise on this server. IPMI is integrated on the motherboard with its own dedicated NIC. I've got that NIC configured with its own IP address. I can remote into it using IPMI, and I can remotely control the server settings before booting the OS ( BIOS, RAID configuration, etc). When the OS boots, I lose the mouse and keyboard. I cannot use the keyboard or mouse when installing the OS either. So the Keyboard and Mouse only work when no OS is loaded. Once the OS loads I lose it - that is my problem. I've been doing some research and trying a few things, but I have not been successful in fixing this issue. I may be wrong, but based on the things I've found online, it seems that the problem could be caused by the way the OS handles USB. The server is headless. There is no keyboard, mouse, or monitor plugged into it. When I boot up the OS and remote into it, I cannot see a mouse or keyboard listed in the Device Manager. Based on what I've read, it seems that the OS should detect a mouse and a keyboard when connecting remotely via IPMI. The following are the solutions I've tried. Nothing has worked so far: I've updated the firmware of the IPMI component to the latest firmware - 1.33. I made sure that the mouse mode was set to Absolute (Windows OS). I've loaded the factory defaults several times. I've enabled Port64h/60h Emulation under the USB settings in the BIOS. I've disabled USB legacy support in the BIOS. I made sure the firewall wasn't blocking IPMI (disabled the firewall). And that's about it. I've found threads in some forums from people having the same issue as me, but they were not running the same OS. They were either running Linux or FreeBSD. Most of them fixed their problem by selecting the right mouse mode (Linux in their case). There was one other that solved the problem by disabling USB Mass Storage mode. He stated "When I set it to disable USB Mass Storage when no image is loaded, the ukbd came alive, and I'm typing this on the IPMI Console. " source: http://freebsd.1045724.n5.nabble.com/IPMI-Console-No-luck-once-OS-is-booted-td3967868.html I suspect the solution described in the previous paragraph is somehow related to my problem. I've found several threads on the internet with issues describing the same problem, but none of them were with Windows Server 2008 R2. Again, I may be wrong, but it seems like that could be the issue. I just don't know how I go about applying a solution in Windows Server 2008 R2. In any case, I could use your expertise. Maybe I am missing something, or maybe I'm on the right track. Your help is much appreciated. Thank you in advance,

  Read the article

• Router 2wire, Slackware desktop in DMZ mode, iptables policy aginst ping, but still pingable

  - by user135501

  I'm in DMZ mode, so I'm firewalling myself, stealthy all ok, but I get faulty test results from Shields Up that there are pings. Yesterday I couldn't make a connection to game servers work, because ping block was enabled (on the router). I disabled it, but this persists even due to my firewall. What is the connection between me and my router in DMZ mode (for my machine, there is bunch of others too behind router firewall)? When it allows router affecting if I'm pingable or not and if router has setting not blocking ping, rules in my iptables for this scenario do not work. Please ignore commented rules, I do uncomment them as I want. These two should do the job right? iptables -A INPUT -p icmp --icmp-type echo-request -j DROP echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_all Here are my iptables: #!/bin/sh # Begin /bin/firewall-start # Insert connection-tracking modules (not needed if built into the kernel). #modprobe ip_tables #modprobe iptable_filter #modprobe ip_conntrack #modprobe ip_conntrack_ftp #modprobe ipt_state #modprobe ipt_LOG # allow local-only connections iptables -A INPUT -i lo -j ACCEPT # free output on any interface to any ip for any service # (equal to -P ACCEPT) iptables -A OUTPUT -j ACCEPT # permit answers on already established connections # and permit new connections related to established ones (eg active-ftp) iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT #Gamespy&NWN #iptables -A INPUT -p tcp -m tcp -m multiport --ports 5120:5129 -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 6667 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 28910 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 29900 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 29901 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 29920 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p udp -m udp -m multiport --ports 5120:5129 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 6500 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 27900 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 27901 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 29910 -j ACCEPT # Log everything else: What's Windows' latest exploitable vulnerability? iptables -A INPUT -j LOG --log-prefix "FIREWALL:INPUT" # set a sane policy: everything not accepted > /dev/null iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT DROP iptables -A INPUT -p icmp --icmp-type echo-request -j DROP # be verbose on dynamic ip-addresses (not needed in case of static IP) echo 2 > /proc/sys/net/ipv4/ip_dynaddr # disable ExplicitCongestionNotification - too many routers are still # ignorant echo 0 > /proc/sys/net/ipv4/tcp_ecn #ping death echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_all # If you are frequently accessing ftp-servers or enjoy chatting you might # notice certain delays because some implementations of these daemons have # the feature of querying an identd on your box for your username for # logging. Although there's really no harm in this, having an identd # running is not recommended because some implementations are known to be # vulnerable. # To avoid these delays you could reject the requests with a 'tcp-reset': #iptables -A INPUT -p tcp --dport 113 -j REJECT --reject-with tcp-reset #iptables -A OUTPUT -p tcp --sport 113 -m state --state RELATED -j ACCEPT # To log and drop invalid packets, mostly harmless packets that came in # after netfilter's timeout, sometimes scans: #iptables -I INPUT 1 -p tcp -m state --state INVALID -j LOG --log-prefix \ "FIREWALL:INVALID" #iptables -I INPUT 2 -p tcp -m state --state INVALID -j DROP # End /bin/firewall-start

  Read the article

• How to connect FreeBSD Jail to network

  - by jgtumusiime

  So recently I successfully installed and configured a freebsd jail and I would like to install software within my jail but I cannot connect to the network. I'm trying to setup an apache+php+mysql installation within the jail and have the webserver accessible by users. Here is my rc.conf for the jail. ... jail_enable="YES" # Set to NO to disable starting of any jails jail_list="mambo2" # Space separated list of names of jails jail_mambo2_rootdir="/usr/jails/j01" # jail's root directory jail_mambo2_hostname="mambo2.ug" # jail's hostname jail_mambo2_ip="192.168.100.174" # jail's IP address jail_mambo2_devfs_enable="YES" # mount devfs in the jail jail_mambo2_devfs_ruleset="mambo2_ruleset" # devfs ruleset to apply to jail here is my jail ifconfig output mambo2# ifconfig rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 00:c1:28:00:48:db media: Ethernet autoselect (100baseTX <full-duplex>) status: active plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 mambo2# It does not show the IP address I configured within /etc/rc.conf. But, when I list the running jails, it shows the right IP address. Here is a list of jails running [root@mambo /usr/home/jtumusiime]# jls JID IP Address Hostname Path 5 192.168.100.174 mambo2.ug /usr/jails/j01 I also created a /etc/resolv.conf for nameservers. This was not in existence so I'm not quite sure if it is necessary? mambo2# cat /etc/resolv.conf nameserver 192.168.100.251 nameserver 8.8.8.8 mambo2# my host has 4 ip addresses, 3 public and one private: 192.168.100.173 I tried creating a jail using ezjail and this does not work out. [root@mambo /usr/src]# ezjail-admin update -p -i Error: Cannot find your copy of the FreeBSD source tree in . Consider using 'ezjail-admin install' to create the base jail from an ftp server. [root@mambo /usr/src]# I have an updated copy of freebsd 7.1 source tree from SVN in /usr/src/ [root@mambo /usr/src]# svn info Path: . URL: http://svn.freebsd.org/base/release/7.1.0 Repository Root: http://svn.freebsd.org/base Repository UUID: ccf9f872-aa2e-dd11-9fc8-001c23d0bc1f Revision: 243371 Node Kind: directory Schedule: normal Last Changed Author: kensmith Last Changed Rev: 186660 Last Changed Date: 2009-01-01 01:57:14 +0300 (Thu, 01 Jan 2009) [root@mambo /usr/src]# and I did #make buildworld while building the first jail i.e mambo2 Here is an excerpt of ouput of ezjail-admin install ... 221 Goodbye. Trying 193.162.146.4... Connected to ftp.freebsd.org. 220 ftp.beastie.tdk.net FTP server (Version 6.00LS) ready. 331 Guest login ok, send your email address as password. 230 Guest login ok, access restrictions apply. Remote system type is UNIX. Using binary mode to transfer files. 200 Type set to I. 550 pub/FreeBSD-Archive/old-releases/i386/7.1-RELEASE/base: No such file or directory. 221 Goodbye. Could not fetch base from ftp.freebsd.org. Maybe your release (7.1-RELEASE) is specified incorrectly or the host ftp.freebsd.org does not provide that release build. Use the -r option to specify an existing release or the -h option to specify an alternative ftp server. Querying your ftp-server... The ftp server you specified (ftp.freebsd.org) seems to provide the following builds: Trying 193.162.146.4... total 10 drwxrwxr-x 13 1006 1006 512 Feb 20 2011 8.2-RELEASE drwxrwxr-x 13 1006 1006 512 Apr 10 2012 8.3-RELEASE lrwxr-xr-x 1 1006 1006 16 Jan 7 2012 9.0-RELEASE -> i386/9.0-RELEASE drwxrwxr-x 7 1006 1006 1024 Feb 19 2012 ISO-IMAGES -rw-rw-r-- 1 1006 1006 637 Nov 23 2005 README.TXT drwxrwxr-x 5 1006 1006 512 Nov 2 02:59 i386 I do not want to upgrade my freebsd installation. I have googled around; but all in vail. Thank you

  Read the article

• Why does my computer run slowly and freeze sometimes?

  - by Brae

  EDIT I disabled sound in the BIOS, rebooted and it hung. I removed the (previously) faulty HDD, rebooted and it hung. I have managed to get my Realtek audio manager open again after its mysterious disappearance. Subsequently my microphone is now working again, to fix it I had to uninstall audio drivers, disable audio in BIOS, install audio drivers, enable audio in BIOS. Access via network (with faulty HDD in) seems to not be triggering hangs at the moment. I think with the sound problem fixed it might play a little nicer, but I think its still going to hang. If it does, then I'm fairly sure its been narrowed down to the mobo. EDIT Pretty convinced my motherboard is the culprit, because nothing else seems to have any obvious problems (bar the hard drive, which the PC still hangs without it being plugged in) So thank you all for helping, once I get more rep ill up a few of the answers. My PC is doing some weird things... Sometimes when I open up a program, lets say Adobe Photoshop, it will load everything normally, nice and quick no problems and I can use it fine. Other times its a little odd, and it loads the program as if it's only using half of the CPU. It's pretty obvious when it does it, normally the loading screen skims past, but when it does this weird load you see it slowly tick though each thing, and the program itself becomes incredibly slow. Even Google Chrome does it sometimes. Yet when I exit and reopen the program without doing anything else, it typically opens fine without lagging. I think this problem is probably a symptom of something bigger, because of other problems I'm having. Random hangs; no matter what I have open or what I'm doing. My PC will sort of freeze up for a few seconds. If music is playing it will either loop the last second or two, or it will buzz. This only lasts for a few seconds then it returns to normal without having to restart. During this time all programs lock up and freeze, and the mouse and keyboard are useless. I am also having a weird issue with my audio jacks, without touching my PC at all, sometimes I will see a popup saying that I have unplugged something or plugged something in, neither of which has actually happened. Pretty sure this is cause by the motherboard. I recently had a 'Pink Screen of Death' (yes pink) which pointed to my audio drivers. The lockups seem to happen with some consistency when someone is accessing my shared files via my home LAN. Which leads me to believe either one of my hard drives is acting up or more likely the controller. One of my drives had a bit of a crash before, I used Spinrite and managed to recover my stuff and now the drive appears to be working okay. This is possibly adding to the problems. My best guess is something has gone wrong with my motherboard, possibly a power issue or a chip has died, I really don't know. So what I would like to know is: Have I have missed some obvious diagnostic to help figure out what it is, or should I just bite the bullet and assume its my motherboard acting up and buy a new system? dxdiag[64-bit] - http://pastebin.com/G30kb2TL PSOD (minidump) - http://pastebin.com/aZsv0H56 HWiNFO64 (system info / specs) - http://pastebin.com/X6h3K8g6

  Read the article

• Squid not caching files (Randomly)

  - by Heinrich

  I want to use an intercepting squid server to cache specific large zip files that users in my network download frequently. I have configured squid on a gateway machine and caching is working for "static" zip files that are served from an Apache web server outside our network. The files that I want to have cached by squid are zip files 100MB which are served from a heroku-hosted Rails application. I set an ETag header (SHA hash of the zip file on the server) and Cache-Control: public header. However, these files are not cached by squid. This, for example, is a request that is not cached: $ curl --no-keepalive -v -o test.zip --header "X-Access-Key: 20767ed397afdea90601fda4513ceb042fe6ab4e51578da63d3bc9b024ed538a" --header "X-Customer: 5" "http://MY_APP.herokuapp.com/api/device/v1/media/download?version=latest" * Adding handle: conn: 0x7ffd4a804400 * Adding handle: send: 0 * Adding handle: recv: 0 ... > GET /api/device/v1/media/download?version=latest HTTP/1.1 > User-Agent: curl/7.30.0 > Host: MY_APP.herokuapp.com > Accept: */* > X-Access-Key: 20767ed397afdea90601fda4513ceb042fe6ab4e51578da63d3bc9b024ed538a > X-Customer: 5 > 0 0 0 0 0 0 0 0 --:--:-- 0:00:09 --:--:-- 0< HTTP/1.1 200 OK * Server Cowboy is not blacklisted < Server: Cowboy < Date: Mon, 18 Aug 2014 14:13:27 GMT < Status: 200 OK < X-Frame-Options: SAMEORIGIN < X-Xss-Protection: 1; mode=block < X-Content-Type-Options: nosniff < ETag: "95e888938c0d539b8dd74139beace67f" < Content-Disposition: attachment; filename="e7cce850ae728b81fe3f315d21a560af.zip" < Content-Transfer-Encoding: binary < Content-Length: 125727431 < Content-Type: application/zip < Cache-Control: public < X-Request-Id: 7ce6edb0-013a-4003-a331-94d2b8fae8ad < X-Runtime: 1.244251 < X-Cache: MISS from AAA.fritz.box < Via: 1.1 vegur, 1.1 AAA.fritz.box (squid/3.3.11) < Connection: keep-alive In the logs squid is reporting a TCP_MISS. This is the relevant excerpt from my squid file: # Squid normally listens to port 3128 http_port 3128 http_port 3129 intercept # Uncomment and adjust the following to add a disk cache directory. maximum_object_size 1000 MB maximum_object_size_in_memory 1000 MB cache_dir ufs /usr/local/var/cache/squid 10000 16 256 cache_mem 2000 MB # Leave coredumps in the first cache dir coredump_dir /usr/local/var/cache/squid cache_store_log daemon:/usr/local/var/logs/cache_store.log #refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern -i .(zip) 525600 100% 525600 override-expire ignore-no-cache ignore-no-store refresh_pattern . 0 20% 4320 ## DNS Configuration dns_nameservers 8.8.8.8 8.8.4.4 After trying around for some time I realized that squid is sometimes deciding that my file is cacheable, sometimes not, depending on whether and when I enable/disable the dns_nameservers directive. What could be wrong here?

  Read the article

• Drupal & nginx : a sound "general purpose" configuration?

  - by sbrattla

  After a bit back and forth with configuring Drupal and nginx to work together, I've come up with the below configuration for a site. It works well, both with private and public file systems. However, as I am fairly new to nginx I'd like to hear if there is something with this configuration that I should change (for Please note! I'm aiming towards getting feedback on a general purpose Drupal configuration. That is, a configuration which others who are trying out Drupal + nginx can "copy paste" to get up and running. server { listen 80; server_name www.example.* example.*; access_log /home/example/www/logs/access.log; error_log /home/example/www/logs/error.log; root /home/example/www/public_html; # Site Icon location = /favicon.ico { log_not_found off; access_log off; } # Search Engines location = /robots.txt { allow all; log_not_found off; access_log off; } # Drush location = /backup { deny all; } # Very rarely should these ever be accessed from outside # the local network. location ~* \.(txt|log)$ { allow 10.0.0.0/8; allow 172.16.0.0/12; allow 192.168.0.0/16; deny all; } location ~ \..*/.*\.php$ { return 403; } # Default location location / { try_files $uri @rewrite; } # Files managed by Drupal will be served via PHP. location ~* /system/files/ { access_log off; try_files $uri @rewrite; } ## Images and static content is treated different location ~* \.(jpg|jpeg|gif|css|png|js|ico|xml)$ { access_log off; expires 30d; } # Some Drupal modules enforce no slash (/) at the end # of the URL. location @rewrite { rewrite_log on; rewrite ^/(.*)$ /index.php?q=$1; } # PHP5-FPM is used to handle PHP. location ~ \.php$ { fastcgi_split_path_info ^(.+\.php)(.*)$; fastcgi_pass unix:/var/run/example.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_intercept_errors on; fastcgi_ignore_client_abort off; fastcgi_connect_timeout 60; fastcgi_send_timeout 180; fastcgi_read_timeout 180; fastcgi_buffer_size 128k; fastcgi_buffers 4 256k; fastcgi_busy_buffers_size 256k; fastcgi_temp_file_write_size 256k; } ## Disable viewing .htaccess & .htpassword location ~ /\.ht { deny all; } }

  Read the article

• Alias wordpress folder from within another website

  - by Bretticus

  I have a little dilemma. I wrote a custom PHP MVC framework and built a CMS on top of it. I decided to give nginx+fpm a whirl too. Which is the root of my dilemma. I was asked to incorporate a wordpress blog into my website (yah.) It has much content and it's not feasible in the short amount of time I have to bring all the content into my CMS. Because of using Apache for years, I'm, admittedly, a little lost using nginx. My website has the file path: /opt/directories/mysite/public/ The wordpress files are located at: /opt/directories/mysite/news/ I know I just need to setup location(s) that targets /news[/*] and then forces all matching URI's to the index.php within. Can someone point me in the right direction perhaps? My configuration is below: server { listen 80; server_name staging.mysite.com index index.php; root /opt/directories/mysite/public; access_log /var/log/nginx/mysite/access.log; error_log /var/log/nginx/mysite/error.log; add_header X-NodeName directory01; location = /favicon.ico { log_not_found off; access_log off; } location = /robots.txt { allow all; log_not_found off; access_log off; } location / { try_files $uri $uri/ /index.php?route=$uri&$args; } location ~ /news { try_files $uri $uri/ @news; } location @news { fastcgi_pass unix:/tmp/php-fpm.sock; fastcgi_split_path_info ^(/news)(/.*)$; fastcgi_param SCRIPT_FILENAME /opt/directories/mysite/news/index.php; fastcgi_param PATH_INFO $fastcgi_path_info; } include fastcgi_params; include php.conf; location ~* ^.+.(jpg|jpeg|gif|css|png|js|ico|xml)$ { access_log off; expires 30d; } ## Disable viewing .htaccess & .htpassword location ~ /\.ht { deny all; } } My php.conf file: location ~ \.php { fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; fastcgi_pass unix:/tmp/php-fpm.sock; # If you must use PATH_INFO and PATH_TRANSLATED then add # the following within your location block above # (make sure $ does not exist after \.php or /index.php/some/path/ will not match): #fastcgi_split_path_info ^(.+\.php)(/.+)$; #fastcgi_param PATH_INFO $fastcgi_path_info; #fastcgi_param PATH_TRANSLATED $document_root$fastcgi_path_info; } fastcgi_params file: fastcgi_connect_timeout 60; fastcgi_send_timeout 180; fastcgi_read_timeout 180; fastcgi_buffer_size 128k; fastcgi_buffers 4 256k; fastcgi_busy_buffers_size 256k; fastcgi_temp_file_write_size 256k; fastcgi_intercept_errors on; Thanks, in large part, to @Kromey, I have adjusted my location /news/ but I am still not getting the desired result. I was able to learn to tack a ~ my /news location as I discovered that my php location was being matched first. With this setup, I now get a 200 status, but the page is blank. Any ideas?

  Read the article

• VPS 512 MB RAM with WordPressMU comes to consumes lots of memory

  - by CAPitalZ

  I have googled for days and gathered all optimization suggestions and tried. My sites are not getting any high hits. May be like 100 hits per day [all my sites combined]. Here are my specs I have 512 MB RAM VPS with burstable 1024 MB. Centos 5 32-bit & cPanel/WHM Apache 2.2 MySQL 5.0 PHP 5.3.2 Here is my Configs I have 2 WordPressMU production sites, and 1 test site my.cnf # The following options will be passed to all MySQL clients [client] #password = your_password port = 3306 socket = /var/lib/mysql/mysql.sock # Here follows entries for some specific programs # The MySQL server [mysqld] port = 3306 socket = /var/lib/mysql/mysql.sock skip-locking skip-bdb skip-innodb key_buffer = 16M max_allowed_packet = 1M table_cache = 64 sort_buffer_size = 512K net_buffer_length = 8K read_buffer_size = 256K read_rnd_buffer_size = 512K myisam_sort_buffer_size = 8M #CAPitalZ thread_cache_size=8 thread_concurrency=4 #query_cache_type=1 #query_cache_limit=1M query_cache_size=16M concurrent_insert=2 low_priority_updates=1 max_connections=50 tmp_table_size=16M max_heap_table_size=16M join_buffer_size=1M interactive_timeout=25 wait_timeout=1000 #connect_timout=10 not able to restart mysql max_connect_errors=10 # Don't listen on a TCP/IP port at all. This can be a security enhancement, # if all processes that need to connect to mysqld run on the same host. # All interaction with mysqld must be made via Unix sockets or named pipes. # Note that using this option without enabling named pipes on Windows # (via the "enable-named-pipe" option) will render mysqld useless! # skip-networking # Disable Federated by default skip-federated # Replication Master Server (default) # binary logging is required for replication log-bin=mysql-bin # required unique id between 1 and 2^32 - 1 # defaults to 1 if master-host is not set # but will not function as a master if omitted server-id = 1 [mysqld_safe] open_files_limit=8192 [mysqldump] quick max_allowed_packet = 16M [mysql] no-auto-rehash # Remove the next comment character if you are not familiar with SQL #safe-updates [isamchk] key_buffer = 20M sort_buffer_size = 20M read_buffer = 2M write_buffer = 2M [myisamchk] key_buffer = 20M sort_buffer_size = 20M read_buffer = 2M write_buffer = 2M [mysqlhotcopy] interactive-timeout httpd.conf I have unselected many modules and recompiled using EasyApache in WHM. Only have the following modules built Deflate Expires Fileprotect Imagemap MPM Prefork Version [default] EAccelerator for PHP Bcmath Calendar CurlSSL [I'm using Curl. But I don't have any https sites] Expat GD [for image cropping] Gettext Imap Mbregex [default] Mbstring [need both Mbregex and Mbstring for utf-8] Mysql of the system MySQL "Improved" extension. Sockets TTF (FreeType) [I'm using custom font] Zlib Under Global Configuration I only have FollowSymLinks enabled I Have TraceEnable, ServerSignature, FileETag OFF ServerTokens ProductOnly DirectoryIndex Priority has index.php as the first one I have removed Clamd [Clam Anti-virus] SpamAssasin is Off Under Tweak Settings Default catch-all/default address behavior for new accounts. This is set to "fail" All stats programs turned off I have eAccelerator installed and checked in phpinfo and its working [Pre VirtualHost Include under WHM] Timeout 20 KeepAlive On MaxKeepAliveRequests 200 KeepAliveTimeout 3 MinSpareServers 1 MaxSpareServers 3 StartServers 1 ServerLimit 50 MaxClients 50 MaxRequestsPerChild 4000 ExtendedStatus Off #ServerType standalone this throws error HostnameLookups Off <Directory "/"> AllowOverride None </Directory> My sites will take ages to load and WHM/CPanel will not even load. adadaa.com/ http://adadaa.net/ kadais.ca/ My average memory consumption is like 1000 MB! [yes always bursting] The process that consumes most CPU and also most memory is mysql But I also get like 15 httpd processes [when its bursting] I already got warning from cpuwatchcheck saying "While processing, the cpu has been maxed out for more than a 6 hour period. The current load/uptime line on the server at the time of this email is 07:00:37 up 11:30, 0 users, load average: 14.64, 16.79, 20.07" I don't know, I have tried switching these config values many different times, but nothing seems to work. Please show some light... Thanks

  Read the article

• website connection reset on first load

  - by Tar

  i'm using nginx with php-cgi. lately a problem has arose where if you don't view my site for a while, like 3-4 minutes, and then open it again, the first request you send will return connection reset by peer in the browser. if you refresh, operation is normal for all subsequent requests. this happens every time and it isn't just an isolated incident, it happens to everyone using my site. i've tried to restart nginx and php-cgi but to no avail. does anyone know what the problem could be? i can provide whatever information necessary. it's worth noting that there's nothing in error log besides that message about client closing the connection early. nginx.conf user nobody; worker_processes 4; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 2048; } http { include /etc/nginx/mime.types; error_page 404 /404.html; error_page 403 /403.html; error_page 444 /444.html; error_page 502 /502.html; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; large_client_header_buffers 8 8k; sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 30; server_tokens off; gzip on; gzip_proxied any; gzip_comp_level 6; gzip_buffers 64 8k; gzip_min_length 1024; gzip_http_version 1.1; gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; include /etc/nginx/conf.d/*.conf; } default.conf server { listen 80; server_name domain.com; error_log /var/log/nginx/error.log debug; access_log /var/log/nginx/access.log; location / { if ($request_method !~ ^(GET|HEAD|POST)$ ) { return 444; } if ($http_user_agent ~* Havij|hvj|acunetix|wget|HTtrack) { return 403; } root /home/admin06/public_html; autoindex off; index index.php; # Images and static content is treated different location ~* ^.+.(jpg|jpeg|gif|css|png|js|ico|xml)$ { access_log off; expires 30d; root /home/admin06/public_html; } location /nginx_status { stub_status on; access_log off;] deny all; } location ~ \.php$ { fastcgi_split_path_info ^(.+\.php)(/.*)$; #try_files $uri =404; fastcgi_pass backend; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /home/site/public_html$fastcgi_script_name; include fastcgi_params; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_intercept_errors on; fastcgi_ignore_client_abort off; fastcgi_connect_timeout 60; fastcgi_send_timeout 60; fastcgi_read_timeout 60; fastcgi_buffer_size 128k; fastcgi_buffers 4 256k; fastcgi_busy_buffers_size 256k; fastcgi_temp_file_write_size 256k; } ## Disable viewing .htaccess & .htpassword location ~ /\.ht { deny all; } location ~ error_log { deny all; } location ~ access_log { deny all; } location ~ \.cgi { deny all; } location ~ \.db { deny all; } }

  Read the article

• Windows 8.1 Update 1 Disk Usage 100%

  - by Gookjin Jeong

  Background Information / Computer Specs I have a 14-inch Samsung Series 5 Ultra. Core i5 CPU, 750GB HDD, 8GB RAM, Intel HD Graphics 4000. I've had the computer for about 1.5 years with no major problems. Problem The issue appeared at the beginning of April this year, when I updated the OS to Windows 8.1 Update 1 (not from 8 to 8.1). After being on continually (except for at night, when I put it on sleep mode) for about 48 hours, the disk usage as seen by Task Manager hits 100%. When this happens, everything from opening/closing applications to typing and even bringing up the start screen by pressing the Windows key becomes extremely slow. The only way to make the disk usage decrease is to restart the computer. Then the problem repeats. I've used my current laptop (as well as my previous laptops) this way -- putting it on sleep mode at night and restarting it only when Windows needs to install updates -- for a long time. So I know the 100% disk usage is not due to the way I use the computer. The thing that causes the spike varies. Sometimes it's System, sometimes it's one of the various applications I installed (e.g. Chrome, Evernote, Spotify, Wunderlist, iTunes, etc.), and sometimes it's Antimalware Service Executable, etc. Tried Solutions I think I tried almost every solution out there for this problem: Running the check disk command (chkdsk /b /f /v /scan c:) from Admin Command Prompt Running Windows Memory Diagnostic Disabling Superfetch and Windows Search from services.msc Running "Fix problems with Windows Update" from Control Panel -- Troubleshooting Updating and rolling back the graphics driver (Intel HD 4000) Disabling "Use hardware acceleration when available" from Chrome settings Disabling Intel Rapid Storage Technology Running the SFC /SCANNOW command as recommended here Running a quick scan & a full scan from Windows Defender (no threats found) Taking the hard drive out and putting it back Refreshing the computer, from the Update and recovery -- Recovery option in Windows settings NONE of the above worked for me. I was about to give up but then noticed that one of the main culprits of the disk usage spike, as shown in the "Disk Activity" section of the Resource Monitor, was C:\System (pagefile.sys). I googled around and found that one of the recommended solutions was to disable pagefile. I then went to **Control Panel -- System and Security -- System -- Advanced system settings -- Advanced tab -- Performance settings -- Advanced tab -- "Change" under Virtual memory and discovered that the number for "Currently allocated" at the bottom was 1280MB, although the number for "Recommended" was 4533MB. I immediately changed it to 4533MB and checked my family members' computers to see what the numbers were like. All of theirs had a currently allocated space that was only slightly smaller than the recommended space. See screenshot below: This might fix the problem. I'll have to wait a couple more days.But if it doesn't, what in the world should I do next? I'm guessing the hard drive isn't failing because This computer is less than 2 years old; and Speccy says that the status of the HDD is good. Update 5/27/2014 The "4533MB" solution did not work. I had to reboot the computer about 30 minutes ago because the disk usage again hit 100%. When I opened Resource Monitor the C:\System (pagefile.sys) again was shown to be the culprit. I have now disabled pagefile entirely via the same window shown above in the screenshot. The number for "currently allocated" is now 0MB. Will update again in a couple days, or if the problem occurs again, whichever comes sooner.

  Read the article

• "The server closed the connection without sending any data"

  - by Toby

  Server setup The problem Diagnostic information What I've tried Specific Help needed 1. I have the following server setup: Debian Squeeze Linux 2.6.32-5-amd64 Apache2-mpm-prefork 2.2.16-6+squeeze10 PHP 5.3.3-7+squeeze14 This server is protected with the Suhosin Patch 0.9.9.1 Max Requests Per Child: 0 - Keep Alive: on - Max Per Connection: 100 Timeouts Connection: 300 - Keep-Alive: 15 Loaded Modules core mod_log_config mod_logio prefork http_core mod_so mod_alias mod_auth_basic mod_auth_digest mod_authn_file mod_authz_default mod_authz_groupfile mod_authz_host mod_authz_user mod_cgi mod_deflate mod_dir mod_env mod_mime mod_negotiation mod_php5 mod_reqtimeout mod_rewrite mod_setenvif mod_ssl mod_status Wordpress 3.4.2 (Upgrading to 3.5 soon :) 2. The problem When I restart the server (sudo shutdown -r now), going to any website page results in the following error from the web browser (in this case, Google Chrome, but other browsers also show the same error). This error can also occur an hour or so after all is working ok, seemingly randomly, which is my biggest concern as it means my server is not reliable: No data received Unable to load the web page because the server sent no data. Here are some suggestions: Reload this web page later. Error 324 (net::ERR_EMPTY_RESPONSE): The server closed the connection without sending any data. 3. Diagnostic information The apache error log contains the folowing entries: [Fri Dec 14 22:23:27 2012] [notice] child pid 1955 exit signal Floating point exception (8) [Fri Dec 14 22:23:27 2012] [notice] child pid 1956 exit signal Floating point exception (8) [Fri Dec 14 22:23:29 2012] [notice] child pid 1957 exit signal Floating point exception (8) [Fri Dec 14 22:23:30 2012] [notice] child pid 1958 exit signal Floating point exception (8) [Fri Dec 14 22:23:32 2012] [notice] child pid 1959 exit signal Floating point exception (8) [Fri Dec 14 22:23:32 2012] [notice] child pid 1960 exit signal Floating point exception (8) [Fri Dec 14 22:23:34 2012] [notice] child pid 1961 exit signal Floating point exception (8) [Fri Dec 14 22:23:34 2012] [notice] child pid 1962 exit signal Floating point exception (8) 4. What I've tried a) I can 'fix' the website temporarily by resetting the server twice (resetting it once does not work) using the following commands. NB: the 'reload' option does not work, I have to use restart twice. However, the error can reoccur sometime later. sudo /etc/init.d/apache2 restart sudo /etc/init.d/apache2 restart b) I have tried disabling suhosin by uninstalling php5-suhosin, but a php info page still shows "This server is protected with the Suhosin Patch 0.9.9.1". I have tried putting Suhosin into simulation mode by creating a file /etc/php5/apache2/conf.d/suhosin.ini containing: [suhosin] suhosin.simulation = On The php info page shows the suhosin.ini file in the list of "Additional .ini files parsed" but the php info page still shows "This server is protected with the Suhosin Patch 0.9.9.1" c) Increasing the PHP memory limit In /etc/php5/apache2/ : ; Maximum amount of memory a script may consume (128MB) ; http://php.net/memory-limit memory_limit = 512M d) Disabling all Wordpress plugins, and going back to the default theme. 5. Specific help needed I would very much like help in debugging what is going on here. I am not sure how to determine what processes are in the Apache error log which are exiting "[notice] child pid 1955 exit signal Floating point exception (8)", or what is causing them to exit. And whether suhosin is part of the problem (and how to disable it if it is). Thank you in advance for any advice or tips you can offer in helping me debug this.

  Read the article

• Print directly to CUPS server from non-local clients (Ubuntu 14.04)

  - by OEP

  I set up a CUPS server with a few queues and printing from local clients (the CUPS test page and Samba) seems to work just fine. It seems like the CUPS server is denying non-local clients though: 130.127.48.70 - - [03/Jun/2014:14:29:19 -0400] "POST /printers/m137 HTTP/1.1" 200 390 Validate-Job successful-ok 130.127.48.70 - - [03/Jun/2014:14:29:19 -0400] "POST /printers/m137 HTTP/1.1" 200 339 Create-Job client-error-not-authorized localhost - - [03/Jun/2014:14:40:50 -0400] "POST /printers/m137 HTTP/1.1" 200 410869 Print-Job successful-ok This makes me think I have some sort of host-based restriction in my configuration file, but I can't find it. I've even set my default policy to Allow all only to get the same log message. I'm working from a configuration file which had previously worked on an older version of CUPS, which looks quite similar to the example cupsd.conf. I could be wrong but it looks like that final <Limit All> block ought to allow the actions the logs complain about. MaxLogSize 2000000000 # Log general information in error_log - change "info" to "debug" for # troubleshooting... LogLevel info #AccessLog syslog #ErrorLog syslog #PageLog syslog # Administrator user group... SystemGroup sys root lp # Only listen for connections from the local machine. Listen 0.0.0.0:631 Listen :::631 Listen /var/run/cups/cups.sock ServerName <snipped> # Show shared printers on the local network. Browsing Off BrowseOrder allow,deny # (Change '@LOCAL' to 'ALL' if using directed broadcasts from another subnet.) BrowseAllow @LOCAL # Default authentication type, when authentication is required... DefaultAuthType Basic # Restrict access to the server... <Location /> Order allow,deny Allow all </Location> # Restrict access to the admin pages... <Location /admin> AuthType Default Require user @SYSTEM Encryption Required Order allow,deny Allow all </Location> # Restrict access to configuration files... <Location /admin/conf> AuthType Default Require user @SYSTEM Encryption Required Order allow,deny Allow all </Location> # Set the default printer/job policies... <Policy default> # Job-related operations must be done by the owner or an administrator... <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job> Require user @OWNER @SYSTEM Order deny,allow </Limit> # All administration operations require an administrator to authenticate... <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default> AuthType Default Require user @SYSTEM Order deny,allow </Limit> # All printer operations require a printer operator to authenticate... <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs> AuthType Default Require user @SYSTEM Order deny,allow </Limit> # Only the owner or an administrator can cancel or authenticate a job... <Limit Cancel-Job CUPS-Authenticate-Job> Require user @OWNER @SYSTEM Order deny,allow </Limit> <Limit All> Order allow,deny </Limit> </Policy>

  Read the article

• PHP, Apache and curl: Differences between Windows and Linux?

  - by beginner_

  I'm trying to run my php App on Ubuntu Server 11.10. This App works fine under Apache + PHP in windows. I have other applications that I can simply copy&paste between the 2 OS and they work on both. (These don't use cURL). However this one uses the php library tonic (RESTful webservices) and makes us of php cURL module. The issue is I'm not getting an error message which makes it impossible to find the issue. I (must) use NTLM authentication and this is done with AuthenNTLM Apache Module: Order allow,deny Allow from all PerlAuthenHandler Apache2::AuthenNTLM AuthType ntlm AuthName "Protected Access" require valid-user PerlAddVar ntdomain "domainName server" PerlSetVar defaultdomain domainName PerlSetVar ntlmsemtimeout 2 PerlSetVar ntlmdebug 1 PerlSetVar splitdomainprefix 0 All files that cURL needs to fetch override AuthenNTLM authentication: order deny,allow deny from all allow from 127.0.0.1 Satisfy any Since these files are only fectehd by cURL from same server, access can be limited to localhost. Possible issues are: NTLM auth isn't overridden for files requested through cURL (even though AllowOverride All is set) curl works differently on linux $ch = curl_init(); curl_setopt($ch, CURLOPT_COOKIE, $strCookie); curl_setopt($ch, CURLOPT_URL, $baseUrl . $queryString); curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1); $html = curl_exec($ch); curl_close($ch); other? Apache log says: [error] Bad/Missing NTLM/Basic Authorization Header for /myApp/webservice/local/viewList.php But this directory should override NTLM authentication using curl command line from windows to access same resource i get: <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> <html> <head> <title>406 Not Acceptable</title> </head> <body> <h1>Not Acceptable</h1> <p>An appropriate representation of the requested resource /myApp/webservice/myResource could not be found on this server.</p> Available variants: <ul> <li><a href="myResource.php">myResource.php</a> , type application/x-httpd-php</li> </ul> <hr> <address>Apache/2.2.20 (Ubuntu) Server at localhost Port 80</address> </body> </html> Note: This is duplicate from http://stackoverflow.com/questions/9821979/php-curl-on-linux-what-is-the-difference-to-curl-on-windows Is it was suggested I post it here. EDIT: Please see Ubuntu Server: Apache2 seems to attach .php to URI as I discovered why it does not work but need help so the issue does not occur anymore. ANSWER: The issue is the default Apache configuration on Ubuntu: Options Indexes FollowSymLinks MultiViews MultiViews is changing request_uri from myResource to myResource.php. Solutions: disable MultiViews in .htaccess: Options -MultiViews remove MultiViews from default config rename the file as example to myResourceClass I chose last option because that should work regardless of configuration and I only have 3 such files so the change took about 30 secs...

  Read the article

• Lockdown users on Windows Server 2012

  - by el.severo

  I set up a Active Directory on a server machine with Windows Server 2012 and I'd like to create some users with limitations like Windows Steady State does in Windows XP (locally). Seen already the Windows SteadyState Handbook (with Windows Server 2008), but I'd like to know if anyone has tried this before, the limitations are the following: 1. Prevent locked or roaming user profiles that cannot be found on the computer from logging on 2. Do not cache copies of locked or roaming user profiles for users who have previously logged on to this computer 3. Do not allow Windows to compute and store passwords using LAN Manager Hash values 4. Do not store usernames or passwords used to log on to the Windows Live ID or the domain 5. Prevent users from creating folders and files on drive C:\ 6. Lock profile to prevent the user from making permanent changes 7. Remove the Control Panel, Printer and Network Settings from the Classic Start menu 8. Remove the Favorites icon 9. Remove the My Network Places icon 10. Remove the Frequently Used Program list 11. Remove the Shared documents folder from My Computer 12. Remove control Panel icon 13. Remove the Set Program Access and Defaults icon 14. Remove the Network Connection(Connect To)icon 15. Remove the Printers and Faxes icon 16. Remove the Run icon 17. Prevent access to Windows Explorer features: Folder Options, Customize Toolbar, and the Notification Area 18. Prevent access to the taskbar 19. Prevent access to the command prompt 20. Prevent access to the registry editor 21. Prevent access to the Task Manager 22. Prevent access to Microsoft Management Console utilities 23. Prevent users from adding or removing printers 24. Prevent users from locking the computer 25. Prevent password changes (also requires the Control Panel icon to be removed) 26. Disable System Tools and other management programs 27. Prevent users from saving files to the desktop 28. Hide A Drive 29. Hide B Drive 30. Hide C Drive 31. Prevent changes to Internet Explorer registry settings 32. Empty the Temporary Internet Files folder when Internet Explorer is closed 33. Remove Internet Options 34. Remove General tab in Internet Options 35. Remove Security tab in Internet Options 36. Remove Privacy tab in Internet Options 37. Remove Content tab in Internet Options 38. Remove Connections tab in Internet Options 39. Remove Programs tab in Internet Options 40. Remove Advanced tab in Internet Options 41. Set a home page (Internet Explorer) 42. Restrict the possibility to change desktop image 43. Restrict the possibility to change wallpaper 44. Restrict usb flash drives Any suggestions for this? UPDATE: As @Dan suggested me I'd like to specify that would be applied to a educational scenario where students can login from a computer and want to add some restrictions to them.

  Read the article

• WPF CommandParameter is NULL first time CanExecute is called

  - by Jonas Follesø

  I have run into an issue with WPF and Commands that are bound to a Button inside the DataTemplate of an ItemsControl. The scenario is quite straight forward. The ItemsControl is bound to a list of objects, and I want to be able to remove each object in the list by clicking a Button. The Button executes a Command, and the Command takes care of the deletion. The CommandParameter is bound to the Object I want to delete. That way I know what the user clicked. A user should only be able to delete their "own" objects - so I need to do some checks in the "CanExecute" call of the Command to verify that the user has the right permissions. The problem is that the parameter passed to CanExecute is NULL the first time it's called - so I can't run the logic to enable/disable the command. However, if I make it allways enabled, and then click the button to execute the command, the CommandParameter is passed in correctly. So that means that the binding against the CommandParameter is working. The XAML for the ItemsControl and the DataTemplate looks like this: <ItemsControl x:Name="commentsList" ItemsSource="{Binding Path=SharedDataItemPM.Comments}" Width="Auto" Height="Auto"> <ItemsControl.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal"> <Button Content="Delete" FontSize="10" Command="{Binding Path=DataContext.DeleteCommentCommand, ElementName=commentsList}" CommandParameter="{Binding}" /> </StackPanel> </DataTemplate> </ItemsControl.ItemTemplate> </ItemsControl> So as you can see I have a list of Comments objects. I want the CommandParameter of the DeleteCommentCommand to be bound to the Command object. So I guess my question is: have anyone experienced this problem before? CanExecute gets called on my Command, but the parameter is always NULL the first time - why is that? Update: I was able to narrow the problem down a little. I added an empty Debug ValueConverter so that I could output a message when the CommandParameter is data bound. Turns out the problem is that the CanExecute method is executed before the CommandParameter is bound to the button. I have tried to set the CommandParameter before the Command (like suggested) - but it still doesn't work. Any tips on how to control it. Update2: Is there any way to detect when the binding is "done", so that I can force re-evaluation of the command? Also - is it a problem that I have multiple Buttons (one for each item in the ItemsControl) that bind to the same instance of a Command-object? Update3: I have uploaded a reproduction of the bug to my SkyDrive: http://cid-1a08c11c407c0d8e.skydrive.live.com/self.aspx/Code%20samples/CommandParameterBinding.zip

  Read the article

• WinVerifyTrust API problem

  - by Shayan

  I'm using WinVerifyTrust API in windows XP and I don't want any kind of user interaction. But when I set the WTD_UI_NONE attribute, although it doesn't show any dialog boxes, but it waits for a long time on the files that in fact wanted user interaction (I mean files which without mentioning the NO UI it will ask the user for that file). This is my code: WINTRUST_FILE_INFO FileData; memset(&FileData, 0, sizeof(FileData)); FileData.cbStruct = sizeof(WINTRUST_FILE_INFO); wchar_t fileName[32769]; FileData.pcwszFilePath = fileName; FileData.hFile = NULL; FileData.pgKnownSubject = NULL; /* WVTPolicyGUID specifies the policy to apply on the file WINTRUST_ACTION_GENERIC_VERIFY_V2 policy checks: 1) The certificate used to sign the file chains up to a root certificate located in the trusted root certificate store. This implies that the identity of the publisher has been verified by a certification authority. 2) In cases where user interface is displayed (which this example does not do), WinVerifyTrust will check for whether the end entity certificate is stored in the trusted publisher store, implying that the user trusts content from this publisher. 3) The end entity certificate has sufficient permission to sign code, as indicated by the presence of a code signing EKU or no EKU. */ GUID WVTPolicyGUID = WINTRUST_ACTION_GENERIC_VERIFY_V2; WINTRUST_DATA WinTrustData; // Initialize the WinVerifyTrust input data structure. // Default all fields to 0. memset(&WinTrustData, 0, sizeof(WinTrustData)); WinTrustData.cbStruct = sizeof(WinTrustData); // Use default code signing EKU. WinTrustData.pPolicyCallbackData = NULL; // No data to pass to SIP. WinTrustData.pSIPClientData = NULL; // Disable WVT UI. WinTrustData.dwUIChoice = WTD_UI_NONE; // No revocation checking. WinTrustData.fdwRevocationChecks = WTD_REVOKE_NONE; // Verify an embedded signature on a file. WinTrustData.dwUnionChoice = WTD_CHOICE_FILE; // Default verification. WinTrustData.dwStateAction = 0; // Not applicable for default verification of embedded signature. WinTrustData.hWVTStateData = NULL; // Not used. WinTrustData.pwszURLReference = NULL; // Default. WinTrustData.dwProvFlags = WTD_REVOCATION_CHECK_END_CERT; // This is not applicable if there is no UI because it changes // the UI to accommodate running applications instead of // installing applications. WinTrustData.dwUIContext = 0; // Set pFile. WinTrustData.pFile = &FileData; // WinVerifyTrust verifies signatures as specified by the GUID // and Wintrust_Data. lStatus = WinVerifyTrust( (HWND)INVALID_HANDLE_VALUE, &WVTPolicyGUID, &WinTrustData); printf("%x\n", lStatus);

  Read the article

• Using depends with the jQuery Validation plugin

  - by Glenn Slaven

  I've got a form with a bunch of textboxes that are disabled by default, then enabled by use of a checkbox next to each one. When enabled, the values in these textboxes are required to be a valid number, but when disabled they don't need a value (obviously). I'm using the jQuery Validation plugin to do this validation, but it doesn't seem to be doing what I expect. When I click the checkbox and disable the textbox, I still get the invalid field error despite the depends clause I've added to the rules (see code below). Oddly, what actually happens is that the error message shows for a split second then goes away. Here is a sample of the list of checkboxes & textboxes: <ul id="ItemList"> <li> <label for="OneSelected">One</label><input id="OneSelected" name="OneSelected" type="checkbox" value="true" /> <input name="OneSelected" type="hidden" value="false" /> <input disabled="disabled" id="OneValue" name="OneValue" type="text" /> </li> <li> <label for="TwoSelected">Two</label><input id="TwoSelected" name="TwoSelected" type="checkbox" value="true" /> <input name="TwoSelected" type="hidden" value="false" /> <input disabled="disabled" id="TwoValue" name="TwoValue" type="text" /> </li> </ul> And here is the jQuery code I'm using //Wire up the click event on the checkbox jQuery('#ItemList :checkbox').click(function(event) { var textBox = jQuery(this).siblings(':text'); textBox.valid(); if (!jQuery(this).attr("checked")) { textBox.attr('disabled', 'disabled'); textBox.val(''); } else { textBox.removeAttr('disabled'); textBox[0].focus(); } }); //Add the rules to each textbox jQuery('#ItemList :text').each(function(e) { jQuery(this).rules('add', { required: { depends: function(element) { return jQuery(element).siblings(':checkbox').attr('checked'); } }, number: { depends: function(element) { return jQuery(element).siblings(':checkbox').attr('checked'); } } }); }); Ignore the hidden field in each li it's there because I'm using asp.net MVC's Html.Checkbox method.

  Read the article

• How do I use PackageManager.addPreferredActivity()?

  - by afonseca

  In SDK 1.5 I was using the PackageManager class to set the preferred home screen to be my app using PackageManager.addPackageToPreferred(). In the new SDK (using 2.1) this has been deprecated so I'm trying to use addPreferredActivity() for the same result but it's not working as expected. Some necessary background. I'm writing a lock screen replacement app so I want the home key to launch my app (which will already be running, hence having the effect of disabling the key). When the user "unlocks" the screen I intend to restore the mapping so everything works as normal. In my AndroidManifest.xml I have: <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> <category android:name="android.intent.category.HOME"/> <category android:name="android.intent.category.DEFAULT" /> </intent-filter> <uses-permission android:name="android.permission.SET_PREFERRED_APPLICATIONS"> </uses-permission> In my code I have the following snippet: // Set as home activity // This is done so we can appear to disable the Home key. PackageManager pm = getPackageManager(); //pm.addPackageToPreferred(getPackageName()); IntentFilter filter = new IntentFilter("android.intent.action.MAIN"); filter.addCategory("android.intent.category.HOME"); filter.addCategory("android.intent.category.DEFAULT"); ComponentName[] components = new ComponentName[] { new ComponentName("com.android.launcher", ".Launcher") }; Context context = getApplicationContext(); ComponentName component = new ComponentName(context.getPackageName(), MyApp.class.getName()); pm.clearPackagePreferredActivities("com.android.launcher"); pm.addPreferredActivity(filter, IntentFilter.MATCH_CATEGORY_EMPTY, components, component); The resulting behavior is that the app chooser comes up when I press the Home key, which indicates that the clearPackagePreferredActivities() call worked but my app did not get added as the preferred. Also, the first line in the log below says something about "dropping preferred activity for Intent": 04-06 02:34:42.379: INFO/PackageManager(1017): Result set changed, dropping preferred activity for Intent { act=android.intent.action.MAIN cat=[android.intent.category.HOME] flg=0x10200000 } type null 04-06 02:34:42.379: INFO/ActivityManager(1017): Starting activity: Intent { act=android.intent.action.MAIN cat=[android.intent.category.HOME] flg=0x10200000 cmp=android/com.android.internal.app.ResolverActivity } Does anyone know what this first log message means? Maybe I'm not using the API correctly, any ideas? Any help would be greatly appreciated.

  Read the article

• Very slow compile times on Visual Studio

  - by johnc

  We are getting very slow compile times, which can take upwards of 20+ minutes on dual core 2GHz, 2G Ram machines. A lot of this is due to the size of our solution which has grown to 70+ projects, as well as VSS which is a bottle neck in itself when you have a lot of files. (swapping out VSS is not an option unfortunately, so I don't want this to descend into a VSS bash) We are looking at combing projects (not nice, as we like the separation of concerns, but is a good opportunity to refactor away some dead wood). We are also looking at having multiple solutions to achieve greater separation of concerns and quicker compile times for each element of the application. This I can see will become a dll hell as we try to keep things in synch. I am interested to know how other teams have dealt with this scaling issue, what do you do when your code base reaches a critical mass that you are wasting half the day watching the status bar deliver compile messages UPDATE Apologies, I neglected to mention this is a C# solution. Thanks for all the cpp suggestions, but it's been a few years since I've had to worry about headers. At a distance I say I miss C++, but I'm not sure I want to go back EDIT: Nice suggestions that have helped so far (not saying there aren't other nice suggestions below, just what has helped) New 3GHz laptop - the power of lost utilization works wonders when whinging to management Disable Anti Virus during compile 'Disconnecting' from VSS (actually the network) during compile - I may get us to remove VS-VSS integration altogether and stick to using the VSS UI Still not rip-snorting through a compile, but every bit helps. Orion did mention in a comment that generics may have a play also. From my tests there does appear to be a minimal performance hit, but not high enough to sure - compile times can be inconsistent due to disc activity. Due to time limitations, my tests didn't include as many Generics, or as much code, as would appear in live system, so that may accumulate. I wouldn't avoid using generics where they are supposed to be used, just for compile time performance WORKAROUND We are testing the practice of building new areas of the application in new solutions, importing in the latest dlls as required, them integrating them into the larger solution when we are happy with them. We may also do them same to existing code by creating temporary solutions that just encapsulate the areas we need to work on, and throwing them away after reintegrating the code. We need to weigh up the time it will take to reintegrate this code against the time we gain by not having Rip Van Winkle like experiences with rapid recompiling during development.

  Read the article

• Problems with transitionWithView and animateWithDuration

  - by MusicMathTech

  I have problems with transitionWithView and animateWithDuration. One of my animateWithDuration blocks doesn't transition, it is a sudden change, and transitionWithView does not temporarily disable user interaction. I have checked the docs and believe I am doing everything correctly, but obviously something is wrong. Here are the two blocks of code: This is in my main View Controller ViewController which has three container views/child view controllers. This block moves one of the container views, but does not block the user from other interactions in ViewController while the transition is occurring. [UIView transitionWithView:self.view duration:0.5 options:UIViewAnimationOptionCurveEaseOut animations:^ { CGRect frame = _containerView.frame; frame.origin.y = self.view.frame.size.height - _containerView.frame.size.height; _containerView.frame = frame; }completion:^(BOOL finished) { // do something }]; This is in one of my container view controllers. The animation seems to have no effect as the text of the productTitleLabel and productDescriptionTextView changes suddenly as if the animation block does not exist. - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { [self.viewController toggleFlavoredOliveOilsTableView]; if (indexPath.row > 0) { NSDictionary *selectedCellDict = [[_flavoredOliveOilsDict objectForKey:@"Unflavored Olive Oils"] objectAtIndex:indexPath.row - 1]; [UIView animateWithDuration:0.5 delay:0 options:UIViewAnimationOptionTransitionCrossDissolve animations:^ { self.viewController.productTitleLabel.text = [_flavoredOliveOilsTableView cellForRowAtIndexPath:indexPath].textLabel.text; self.viewController.productDescriptionTextView.text = [selectedCellDict objectForKey:@"Description"]; }completion:nil]; if (indexPath.row == 1) { [self.viewController setProductDescriptionTextViewFrameForInformationTab]; } else { [self.viewController setProductDescriptionTextViewFrameForNonInformationTab]; //self.viewController.productImageView.image = [UIImage imageNamed:[selectedCellDict objectForKey:@"Image"]]; } } } I think the problems are somewhat related as most of my animation and transition blocks don't work completely as expected. Thanks for any help. Edit What I am trying to accomplish is moving a container view in ViewController and set the text and image properties of a label, text view, and image view; all of which are in the main view. The details of these properties are sent via the child view controller. The transitionWithView is in a method called toggleFlavoredOiveOilsTableView which is called in didSelectRowAtIndexPath. I think the problem is that I am trying to call two different animation/transition blocks at the same time.

  Read the article

< Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >