Search Results

Search found 7592 results on 304 pages for 'fenchkiss dev'.

Page 196/304 | < Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >

• Unable to use NTFS partition for Dropbox in Linux

  - by Cristian

  Dropbox won't let me choose the sync folder inside a NTFS partition. First thought I had was mounting and its permissions (the Dropbox installer does let me choose my linux home as the Dropbox home). After searching and trying several other lines, the partition is mounted via fstab with these settings: /dev/sda5 /mnt/documents ntfs-3g uid=1000,gid=100,dmask=027,fmask=137 0 0 I can read and write in the partition, here is a ls output: 24 drwxr-x--- 1 tuxcayc users 24576 Sep 2 06:42 documents I'm using an Arch-based distro (Manjaro) and Dropbox installed via yaourt. I guess it's still some issue with mounting permissions. Any help is appreciated, Thanks.

  Read the article

• How Do I make an Acer T230H Touchcreen work on Ubuntu 9.10?

  - by N Rahl

  I've done this so far: sudo nano /etc/udev/rules.d/99-touchscreen.rules And added: SUBSYSTEM=="usb", ATTRS{idVendor}=="0408", ATTRS{idProduct}=="3000", SYMLINK+="usb/quanta_touch" SUBSYSTEM=="input", KERNEL=="event*", ATTRS{idVendor}=="0408", ATTRS{idProduct}=="3000", SYMLINK+="input/quanta_touch" sudo service udev restart then the instructions here: http://ubuntuforums.org/showpost.php?p=8932808&postcount=36 And then added to my xorg conf: Section "InputDevice" Identifier "Acer T230H" Driver "hidtouch" Option "SendCoreEvents" "true" Option "ReportingMode" "Raw" Option "Device" "/dev/usb/quanta_touch" Option "PacketCount" "13" Option "OpcodePressure" "852034" Option "OpcodeX" "65584" Option "OpcodeY" "65585" Option "CalibrationModel" "1" Option "CornerTopLeftX" "0" Option "CornerTopLeftY" "0" Option "CornerTopRightX" "1920" # 1920 for 23" Option "CornerTopRightY" "0" Option "CornerBottomLeftX" "0" Option "CornerBottomLeftY" "1080" # 1080 for 23" Option "CornerBottomRightX" "1920" # 1920 for 23" Option "CornerBottomRightY" "1080" # 1080 for 23" Option "CornerScreenWidth" "1920" # 1920 for 23" Option "CornerScreenHeight" "1080" # 1080 for 23" EndSection Section "ServerLayout" Identifier "Touchscreen" InputDevice "Acer T230H" "SendCoreEvents" EndSection And restarted. And the touchscreen does nothing. Any ideas?

  Read the article

• Which app has a notification sound with 3 descending notes?

  - by Eric

  Brand new Windows 7 box loaded with the usual dev tools -- VS2008, Firefox, Chatzilla, Thunderbird, emacs, Pidgin, Putty, iTunes, SharpReader. Every couple of minutes, I get an audio notification consisting of three rising notes, maybe a middle-C-G-F on a piano (I don't have a piano handy, and don't have time to use GarageBand to try to figure it out). Nothing in the notification bar is flashing when this happens. The sound isn't in any of the Windows Sound control panel applets. And it's not in C:\Windows\Media, so it's most likely coming from a non-Microsoft app. Any chance it's Pidgin when the status one of my contact's changes (which happens plenty frequently)? Oh, look at this --- Tools/Mute Sounds. Let's try that and see what happens... Is this familiar to anyone?

  Read the article

• Is there a simple Load Balancer app for development environment on Windows?

  - by djangofan

  Does there exist a simple Load Balancer app for development on Windows? I am running a pair of JBoss 5.x instances in a cluster on a single machine. Normally , this configuration is load balanced by a nice hardware load balancer but I am wondering if there is a simple piece of software to enable load balancing in my Eclipse dev environment. Basically, for example, I want a load balancer running on port 11111 that round-robins between the 2 clustered JBoss instances on ssl ports 8443 and 8543 . (or http port if thats not possible) I know that Glassfish has a built-in load balancer but I can't use Glassfish. One idea I have is to try to setup a separate instance of Tomcat with the "balancer" web app. Im trying that now... not sure if it will work... and its a complicated setup and I wish there was something really easy.

  Read the article

• Trouble editing ~/.bash_profile: -bash: $'\r': command not found

  - by Dave

  I installed CygWin on Windows 7. Using Notepad, I edited my ~/.bash_profile file to add on to the PATH variable … PATH="${PATH}:/cygdrive/c/apache-ant-1.8.2/bin" Now, when I SSH in to my Windows machine, I get this error … -bash: $'\r': command not found -bash: $'\r': command not found -bash: $'\r': command not found -bash: $'\r': command not found -bash: $'\r': command not found -bash: /home/dev/.bash_profile: line 39: syntax error: unexpected end of file and my PATH is not set. Anyone know how I can correct this?

  Read the article

• Force local IP traffic to an external interface

  - by calandoa

  I have a machine with several interfaces that I can configure as I want, for instance: eth1: 192.168.1.1 eth2: 192.168.2.2 I would like to be able to forward all the traffic to one of these local address trhough the other interface. For instance, all requests to an iperf, ftp, http server at 192.168.1.1 are not just routed internally, but forwarded through eth2 (and the external network will take care of re-routing the packet to eth1). I tried and looked at several commands, like iptables, ip route, etc... but nothing worked. The closest behavior I could get was done with: ip route change to 192.168.1.1/24 dev eth2 which send all 192.168.1.x on eth2, except for 192.168.1.1 which is still routed internally. The goal of this setup is to do interface driver testing without using two PCs. I am using Linux, but if you know how to do that with Windows, I'll buy it!

  Read the article

• Mantaining Wordpress website with subversion

  - by Geries

  I want to setup a website using wordpress, which we can modified locally and then via subversion commit the site and make it public. This means to installing new plugins, changing the content, testing updates of wordpress to see if they work with the theme, etc. The idea is to control the development on the site, in case we need to keep track of the dev or roll back, because of unexpected bugs in a the plugins, theme, etc. I've read this article in codex, however I'm not sure how this is done when, we want to include the content and changes on the options of worpdress and plugins (which is in the mysql). Thanks

  Read the article

• Netinstalling CentOS if the gateway is in a different subnet

  - by James Lawrie

  I have a KVM host (A) running a virtual machine (B). They each have their own external IP address and the networking is setup using bridging between eth0 and br0 on A. B uses eth0, with A being the gateway. The problem is that the two external IP addresses are on different subnets (different /8s in fact) so by default, B claims it cannot reach A (Network Unreachable). I can resolve this by adding a static route on B: echo "any host gateway_ip dev eth0" > /etc/sysconfig/static-routes Modifying /etc/init.d/networking to reload the gateway after applying static routes (I only added the final line before fi): if [ -f /etc/sysconfig/static-routes ]; then grep "^any" /etc/sysconfig/static-routes | while read ignore args ; do /sbin/route add -$args done route add default gw "${GATEWAY}" fi If I then restart networking, it comes online. How can I do this (or work around it some other way) prior to the system being installed, ideally inside an Anaconda kickstart file?

  Read the article

• PHP: Symlink in public_html cannot be accessed through browser

  - by Rachel

  I have tester.php file which I want to run on the browser and I have created symlink to it in my public_html folder, but still when I try to run it, its not working and gives me following error message. Access forbidden! You don't have permission to access the requested object. It is either read-protected or not readable by the server. If you think this is a server error, please contact the webmaster. Error 403 web.upc03.dev.com Sun Apr 4 22:41:23 2010 Apache I am not sure as to why am I getting this error message, I have check all file permissions settings and it seems to be fine. My File permissions settings are: lrwxrwxrwx for tester.php Is there something that should be done other way or is this not the proper approach ?

  Read the article

• Flash not Working in Google Chrome for Mac

  - by Blakeasd

  Flash has randomly stopped working in Google Chrome for Mac. All that appears is a white flash then nothing. I can hear sound, and when I right click on where Flash is supposed to be I see the Flash Player options. I have completely reinstalled Chrome, including deleting all of its support files. I reinstalled my system flash and tried making Chrome use my system flash, but nothing works. Flash is fine in Safari, but not in Chrome. How do I fix this? I am running the latest Google Chrome Dev build (21.0.1171.0) and Mac OS X 10.7.4 . Thanks!

  Read the article

• Exim queue in WHM

  - by Xobb

  Hi fellas, I've got the centos server with WHM. The mail server is exim. I need exim put all messages in queue and not sending directly.Though I've added the queue_only option to exim configuration and the messages are collected in the queue now. Afterwards I've found out that someone is calling exim -q to process the queue every once in a while. I've found the following cron job: 0 6 * * * /scripts/exim_tidydb > /dev/null 2>&1 which I beleive has been used to process the exim queue. Also I suspect that script was installed alongside with WHM. Surely I've commented it out and was expecting everything to work just fine. But that didn't happen. I still get the exim queue processed once in a while. Am I missing anything? What may cause my exim queue to process? Here is cat /etc/exim.conf | grep queue queue_only deliver_queue_load_max = 3 Thanks

  Read the article

• Netboot Debian (wheezy) from NFS v4

  - by bara

  Is it possible to boot Debian Wheezy from NFS v4? Bootwing with NFS v3 works just fine. NFS v4 not. This is in my /etc/exports: /nfs 192.168.100.0/24(ro,sync,insecure,no_root_squash,no_subtree_check,fsid=0) /nfs/root 192.168.100.0/24(ro,nohide,sync,insecure,no_root_squash,no_subtree_check) /nfs/root/www contains the root of the webserver. The commandline is: rootfstype=nfs4 root=/dev/nfs4 nfsroot=192.168.100.1:/root/www fails with mount call failed - server replied: Permission denied. Mounting from the busybox in the initrd fails: mount -t nfs4 192.168.100.1:/nfs/root/www /root mounting .. failed: Invalid argument Do I need to modify the initrd?

  Read the article

• Are these components compatible and are there any significant bottlenecks?

  - by Tom Gullen

  I'm trying to buy a new pc, for software dev and a bit of gaming. I already have a 500gb HDD , and a PCI sound card I want to use as well. Is all this stuff compatible, and will it all work together and are there any significant bottlenecks? Case, Mobo and PSU "Primo Motion" AMD 880G DDR3 Ready Barebones (Socket AM3) http://www.overclockers.co.uk/showproduct.php?prodid=FS-268-OK&groupid=43&catid=1817&subcat= SSD 64GB Crucial RealSSD C300 64GB 2.5" SATA 6Gb/s Solid State Hard Drive http://www.overclockers.co.uk/showproduct.php?prodid=HD-007-CR&groupid=1657&catid=1660&subcat=1668 CPU AMD Phenom II X6 Six Core 1090T Black Edition 3.20GHz (Socket AM3) http://www.overclockers.co.uk/showproduct.php?prodid=CP-266-AM&groupid=701&catid=6&subcat=1944 RAM 8GB Corsair Vengeance 8GB (2x4GB) DDR3 PC3-15000C9 1866MHz Dual Channel Kit http://www.overclockers.co.uk/showproduct.php?prodid=MY-292-CS&groupid=701&catid=8&subcat=1387 Graphics XFX ATI Radeon HD 5770 1024MB GDDR5 PCI-Express Graphics Card http://www.overclockers.co.uk/showproduct.php?prodid=GX-149-XF

  Read the article

• How to determine the used size of device associated's buffer

  - by dubbaluga

  Hi, when mounting a device without the "sync" option, e. g. by invoking the following: mount -o async /dev/sdc1 /mnt a buffer is associated with a device to optimize (speed) read/write operations. Is there a way to determine the size of this buffer? Another question that comes into my mind is, if it's possible to find out how much of it is used currently. This can be interesting to determine the time it would take to "sync" or "umount" slow devices, such as flash-based media. Thanks in advance for your answers, Rainer

  Read the article

• Outputting SVN hook messages

  - by Luke Segars

  Hi all, I have a subversion repository on my Linux machine that is set up to export a new build of a project every time a new commit occurs using a post-commit hook. I would really like to be able to provide an output message to the committer containing some status information once the hook completes. Is it possible to redirect the output of the hook to come after the standard commit messages? For example: owner@dev-machine:/working/dir$ svn commit Sending FILE1 Sending FILE2 Transmissing file data ... Committed revision 13. Exporting project... Successfully exported to mysite.com The addition of the last two lines is the functionality I'm looking for.

  Read the article

• What is the harm in giving developers read access to application server application event logs?

  - by Jim Anderson

  I am a developer working on an ASP.NET application. The application writes logging messages to the Windows event log - a custom application log just for this application. However, I do not have any access to testing or staging web/application servers. I thought an admin could just give me read access to this event log to help in debugging problems (currently a service that is working in dev is not working in test environment and I have no idea why) but that is against my client's (I'm a consultant) policy. I feel silly to keep asking an admin to look at the event log for me. What is the harm in giving developers read access to application server application event logs? Is there a different method of application logging that sysadmins prefer programmers use? Surely, admins don't want to be fetching logging messages for developers all the time.

  Read the article

• Very slow disk performance on Dell PowerEdge 2950 w/ PERC 6/i running RAID 10

  - by vocoder

  I recently set up a server running Ubuntu 10.04 LTS on a Dell PowerEdge 2950 server - it has 6 500 gb 7200RPM SATA drives setup in a RAID 10 config. I am seeing extremely poor disk performance - the RAID array reports all disks are normal and using MegaCLI, it looks like the BBU is fine. hdparm -tT /dev/sda reports: Timing cached reads: 90 MB in 2.05 seconds = 43.96 MB/sec Timing buffered disk reads: 24 MB in 3.11 seconds = 7.72 MB/sec So as you can see, it takes forever to something as simple as an apt-get upgrade and even logging into the server. How do I go about troubleshooting what is causing this? I upgraded the firmware on the PERC 6i RAID controller to the latest, but didn't see any improvements.

  Read the article

• Proxmox 31 + KVM routing + IP subnet + csf

  - by KeyJey

  We have proxmox 3.1 server in netzner with routuing network and IP subnet block. We want to implement csf firewall without interfering the traffic of the KVM VMs, what would be the easiest way? We readed that we should add this lines to /etc/csf/csfpost.sh: iptables -A FORWARD -d 144.76.223.155 -j ACCEPT iptables -A FORWARD -d 144.76.223.156 -j ACCEPT iptables -A FORWARD -d 144.76.223.157 -j ACCEPT iptables -A FORWARD -d 144.76.223.158 -j ACCEPT iptables -A FORWARD -d 144.76.223.159 -j ACCEPT iptables -A FORWARD -d 144.99.183.323 -j ACCEPT But when we enable csf the ping breaks, this is the network config (IPs are modified): auto lo iface lo inet loopback # device: eth0 auto eth0 iface eth0 inet static address 144.76.166.100 netmask 255.255.255.255 pointopoint 144.76.183.97 gateway 144.76.183.97 # for single IPs auto vmbr0 iface vmbr0 inet static address 144.76.166.100 netmask 255.255.255.255 bridge_ports none bridge_stp off bridge_fd 0 up ip route add 144.99.183.323/32 dev vmbr0 # for a subnet auto vmbr1 iface vmbr1 inet static address 144.76.166.100 netmask 255.255.255.248 bridge_ports none bridge_stp off bridge_fd 0 Thanks in advanced ! :)

  Read the article

• MX record configuration for hosted email?

  - by Paul Sanwald

  I am helping a friend with his website, and am having a problem with his webmail configuration, which I suspect is due to a misconfigured MX record. His domain is registered and hosted by hostmonster, they have a webmail option. A record: Host Points To TTL webmail 12.345.789.101 14400 CNAME: mail webmail.d.com 14400 MX Record: 0 @ mail.d.com 14400 I've created an email account on hostmonster, [email protected]: however, when I sent an email to this account, it appears to be routing to /dev/null. I know that it's not actually, but am unsure of the steps I can take to track this down? I've tried using dig, but am unsure where to start. How can I track down where this email is being routed to?

  Read the article

• How can I upgrade PHP on Windows 7?

  - by jasondavis

  I am currently running Xampp for a dev server on Windows 7. It has Apache, PHP,MySQL and some other stuff all in one simple exe package for windows and works great. My version currently has PHP version 5.2.9 and the new version of Xampp comes with PHP 5.3.1 I would like to use the newer PHP but I do not want to update everything else. So how would I install the newest version of PHP in windows? Also on the Xampp page there is another extension download for Tomcat 6.0.20 I am not sure what Tomcat does can someone explain?

  Read the article

• raspberry pi for web programming/development

  - by Mark Dee

  I'm into web development and my machine (AMD Phenom II, 8G RAM) is running Ubuntu 13.04. I love my current setup but I kinda miss some of Windows software like MSOffice or Adobe suites, and running on Virtualbox doesn't feel as snappy for me.... So I'm thinking of buying a new cheap machine where I would install Linux and do my development work there and have my current machine run Windows. I just found this thing called Raspberry pi which is really cheap and requires 12v only (I think) which makes it good for downloading stuff overnight. So, does it make sense to buy Raspberry pi, make it my primary dev machine, Windows being the secondary (for Adobe and browser testing of course)? Basically, I want to know if Raspberry pi meets the following requirements: It should run ArchLinux Sublime Text 3 python ruby nginx nodejs Deluge or Transmission (well, maybe just those, no need for videos and music players)

  Read the article

• Multiple PHP versions running as cgi

  - by Pierre

  I'm trying to install a second version of PHP, to run alongside the current version of php. I've compiled the latest php source from github (5.5-DEV), and I'm trying to run it as CGI. Here is my virtual host config: <VirtualHost *:8055> DocumentRoot /Library/WebServer/Documents/ ScriptAlias /cgi-bin/ /usr/local/php55/cgi Action php55-cgi /cgi-bin/php-cgi AddHandler php55-cgi .php <Directory /Library/WebServer/Documents/> Options Indexes FollowSymLinks Includes ExecCGI AllowOverride All Order Allow,Deny Allow from all </Directory> DirectoryIndex index.html index.php </VirtualHost> But when I go to http://127.0.0.1:8055/info.php, I get the following error: Forbidden You don't have permission to access /cgi-bin/php-cgi/info.php on this server Edit I'm now switching between LoadModule php5_module /usr/local/php54/libphp5.so and LoadModule php5_module /usr/local/php55/libphp5.so It works for now, but is not ideal. I would like to have the different versions of php on different virtual hosts

  Read the article

• How to copy directories using debugfs?

  - by STM

  The debugfs manpage gives the impression that the command 'rdump . .' will recursively copy all files found on the specified filesystem from the debugfs cwd to the native filesystem's cwd. Instead I seem to receive a syntax error, and no copy is initiated? These are the commands I run: cd /path/to/transfer/destination debugfs /dev/sda1 -R rdump . . My task is to copy the entire contents of a clean yet unmountable USB storage device to its host machine's HD. The host machine does not support the inode size used by the USB device's filesystem (256) and its software is not upgradeable, so my intention was to use debugfs to transfer the files. If anyone has any other suggestions for this task I'd be grateful.

  Read the article

• SSH as root using public key still prompts for password on RHEL 6.1

  - by Dean Schulze

  I've generated rsa keys with cygwin ssh-keygen and copied them to the server with ssh-copy-id -i id_rsa.pub [email protected] I've got the following settings in my /etc/ssh/sshd_config file RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys PermitRootLogin yes When I ssh [email protected] it still prompts for a password. The output below from /usr/sbin/sshd -d says that a matching keys was found in the .ssh/authorized_keys file, but it still requires a password from the client. I've read a bunch of web postings about permissions on files and directories, but nothing works. Is it possible to ssh with keys in RHEL 6.1 or is this forbidden? The debug output from ssh and sshd is below. $ ssh -v [email protected] OpenSSH_6.1p1, OpenSSL 1.0.1c 10 May 2012 debug1: Connecting to my.ip.address [my.ip.address] port 22. debug1: Connection established. debug1: identity file /home/dschulze/.ssh/id_rsa type 1 debug1: identity file /home/dschulze/.ssh/id_rsa-cert type -1 debug1: identity file /home/dschulze/.ssh/id_dsa type 2 debug1: identity file /home/dschulze/.ssh/id_dsa-cert type -1 debug1: identity file /home/dschulze/.ssh/id_ecdsa type -1 debug1: identity file /home/dschulze/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH_5* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA 9f:00:e0:1e:a2:cd:05:53:c8:21:d5:69:25:80:39:92 debug1: Host 'my.ip.address' is known and matches the RSA host key. debug1: Found key in /home/dschulze/.ssh/known_hosts:3 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/dschulze/.ssh/id_rsa debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug1: Offering DSA public key: /home/dschulze/.ssh/id_dsa debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug1: Trying private key: /home/dschulze/.ssh/id_ecdsa debug1: Next authentication method: password Here is the server output from /usr/sbin/sshd -d [root@ga2-lab .ssh]# /usr/sbin/sshd -d debug1: sshd version OpenSSH_5.3p1 debug1: read PEM private key done: type RSA debug1: private host key: #0 type 1 RSA debug1: read PEM private key done: type DSA debug1: private host key: #1 type 2 DSA debug1: rexec_argv[0]='/usr/sbin/sshd' debug1: rexec_argv[1]='-d' debug1: Bind to port 22 on 0.0.0.0. Server listening on 0.0.0.0 port 22. debug1: Bind to port 22 on ::. Server listening on :: port 22. debug1: Server will not fork when running in debugging mode. debug1: rexec start in 5 out 5 newsock 5 pipe -1 sock 8 debug1: inetd sockets after dupping: 3, 3 Connection from 172.60.254.24 port 53401 debug1: Client protocol version 2.0; client software version OpenSSH_6.1 debug1: match: OpenSSH_6.1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.3 debug1: permanently_set_uid: 74/74 debug1: list_hostkey_types: ssh-rsa,ssh-dss debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: client->server aes128-ctr hmac-md5 none debug1: kex: server->client aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST received debug1: SSH2_MSG_KEX_DH_GEX_GROUP sent debug1: expecting SSH2_MSG_KEX_DH_GEX_INIT debug1: SSH2_MSG_KEX_DH_GEX_REPLY sent debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: KEX done debug1: userauth-request for user root service ssh-connection method none debug1: attempt 0 failures 0 debug1: PAM: initializing for "root" debug1: userauth-request for user root service ssh-connection method publickey debug1: attempt 1 failures 0 debug1: test whether pkalg/pkblob are acceptable debug1: PAM: setting PAM_RHOST to "172.60.254.24" debug1: PAM: setting PAM_TTY to "ssh" debug1: temporarily_use_uid: 0/0 (e=0/0) debug1: trying public key file /root/.ssh/authorized_keys debug1: fd 4 clearing O_NONBLOCK debug1: matching key found: file /root/.ssh/authorized_keys, line 1 Found matching RSA key: db:b3:b9:b1:c9:df:6d:e1:03:5b:57:d3:d9:c4:4e:5c debug1: restore_uid: 0/0 Postponed publickey for root from 172.60.254.24 port 53401 ssh2 debug1: userauth-request for user root service ssh-connection method publickey debug1: attempt 2 failures 0 debug1: temporarily_use_uid: 0/0 (e=0/0) debug1: trying public key file /root/.ssh/authorized_keys debug1: fd 4 clearing O_NONBLOCK debug1: matching key found: file /root/.ssh/authorized_keys, line 1 Found matching RSA key: db:b3:b9:b1:c9:df:6d:e1:03:5b:57:d3:d9:c4:4e:5c debug1: restore_uid: 0/0 debug1: ssh_rsa_verify: signature correct debug1: do_pam_account: called Accepted publickey for root from 172.60.254.24 port 53401 ssh2 debug1: monitor_child_preauth: root has been authenticated by privileged process debug1: temporarily_use_uid: 0/0 (e=0/0) debug1: ssh_gssapi_storecreds: Not a GSSAPI mechanism debug1: restore_uid: 0/0 debug1: SELinux support enabled debug1: PAM: establishing credentials PAM: pam_open_session(): Authentication failure debug1: Entering interactive session for SSH2. debug1: server_init_dispatch_20 debug1: server_input_channel_open: ctype session rchan 0 win 1048576 max 16384 debug1: input_session_request debug1: channel 0: new [server-session] debug1: session_new: session 0 debug1: session_open: channel 0 debug1: session_open: session 0: link with channel 0 debug1: server_input_channel_open: confirm session debug1: server_input_global_request: rtype [email protected] want_reply 0 debug1: server_input_channel_req: channel 0 request pty-req reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req pty-req debug1: Allocating pty. debug1: session_pty_req: session 0 alloc /dev/pts/1 ssh_selinux_setup_pty: security_compute_relabel: Invalid argument debug1: server_input_channel_req: channel 0 request shell reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req shell debug1: Setting controlling tty using TIOCSCTTY. debug1: Received SIGCHLD. debug1: session_by_pid: pid 17323 debug1: session_exit_message: session 0 channel 0 pid 17323 debug1: session_exit_message: release channel 0 debug1: session_pty_cleanup: session 0 release /dev/pts/1 debug1: session_by_channel: session 0 channel 0 debug1: session_close_by_channel: channel 0 child 0 debug1: session_close: session 0 pid 0 debug1: channel 0: free: server-session, nchannels 1 Received disconnect from 172.60.254.24: 11: disconnected by user debug1: do_cleanup debug1: PAM: cleanup debug1: PAM: deleting credentials

  Read the article

• FreeBSD: Samba performance over GBit-Ethernet

  - by Axel Gneiting

  I'm using a FreeBSD NAS with RAID-Z. I can read ~300MB/s from the ZFS disks to /dev/null on the box, but only get about 50MB/s over GBit-Ethernet with SMB to Windows 7 (Samba 3.5.6). Both systems have Intel-PCIe-NICs and are connected directly. Samba is configured to use AIO and I already tried to tune TCP/IP: kern.ipc.maxsockbuf=16777216 net.inet.tcp.sendspace=1048576 net.inet.tcp.recvspace=1048576 net.inet.tcp.sendbuf_max=8388608 net.inet.tcp.recvbuf_max=8388608 net.inet.tcp.delayed_ack=0 Any ideas what's causing the bottleneck? I think the link should handle 100 MB/s easily.

  Read the article

< Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >