formula editor - Page 196

Language Club – Battle of the Dynamic Languages

- by Ben Griswold

After dedicating the last eight weeks to learning Ruby, it’s time to move onto another language. I really dig Ruby. I really enjoy its dynamism and expressiveness and always-openness and it’s been the highlight of our coding club for me so far. But that’s just my take on the language. I know a lot of coders who’s stomachs turn with the mere thought of Ruby. They say it’s Ruby’s openness which has them feeling uneasy. I’d say “write a bunch of tests and get over it,” but I figure there must be more to it than always open classes and possible method collisions. Yes, there’s something else to it alright. The folks who didn’t fall head over heals for Ruby are already in love with Python. You might remember that Python was the first language we tackled in our coding club. My time with Python was okay but it didn’t feel as natural to me as Ruby. But let’s say we started with Ruby and then moved onto Python. Would I see Python in a different light right now. Might I even prefer Python over Ruby? I suppose it’s possible but it’s pretty tough to test that theory – unless we visit Python for a second time. That’s right. The language club is going to focus on Python again and in my attempt to learn Python – yet again – in the open, I’ll be posting my solutions here just as I did for Ruby. We don’t always have second chances so I going about this relearning with two primary goals in mind: First, I’m going to use IronPython and the IronPython tools which provide a Python code editor, a file-based project system, and an interactive Python interpreter, all inside Visual Studio 2010. As a note, the IronPython tools are now part of the main IronPython installer which is Version 2.7 Alpha 1 (not the latest stable version, 2.6.1) and I’d be crazy not to use them. Second, I’d like to make sure I’m still learning Python without a complete MS skew so I’m going to run my code through Eclipse using the PyDev plugin as well. Heck, I might use IDLE too. I already have this setup on my machine so it’s no big deal. Okay, that’s it for now. I worked on the first ten Euler problems last night and the solutions will be posted shortly. Wish me luck.

Read the article

How to add items to the Document Types context menu.

- by Vizioz Limited

I am currently working on an extension to Umbraco that needed an extra menu item on the Document Types menu in the Settings section, my first thought was to use the BeforeNodeRender event to add the menu item, but this event only fires on the Content and Media menu trees.See: Codeplex Issue 21623The "temporary" solution has been to extend the "loadNodeTypes" class, I say temporary because I assume that the core team may well extend the event functionality to the entire menu tree in the future which would be much better and would prevent you from having to complete override the menu items.This was suggested by Slace on my "is it possible to add an item to the context menu in tree's other than media content" post on the our.umbraco.org site.There are three things you need to do:1) Override the loadNodeTypesusing System.Collections.Generic;using umbraco.interfaces;using umbraco.BusinessLogic.Actions;namespace Vizioz.xMind2Umbraco{ // Note: Remember these menu's might change in future versions of Umbraco public class loadNodeTypesMenu : umbraco.loadNodeTypes { public loadNodeTypesMenu(string application) : base(application) { } protected override void CreateRootNodeActions(ref List<IAction> actions) { actions.Clear(); actions.Add(ActionNew.Instance); actions.Add(xMindImportAction.Instance); actions.Add(ContextMenuSeperator.Instance); actions.Add(ActionImport.Instance); actions.Add(ContextMenuSeperator.Instance); actions.Add(ActionRefresh.Instance); } protected override void CreateAllowedActions(ref List<IAction> actions) { actions.Clear(); actions.Add(ActionCopy.Instance); actions.Add(xMindImportAction.Instance); actions.Add(ContextMenuSeperator.Instance); actions.Add(ActionExport.Instance); actions.Add(ContextMenuSeperator.Instance); actions.Add(ActionDelete.Instance); } }}2) Create a new Action to be used on the menuusing umbraco.interfaces;namespace Vizioz.xMind2Umbraco{ public class xMindImportAction : IAction { #region Implementation of IAction public static xMindImportAction Instance { get { return umbraco.Singleton<xMindImportAction>.Instance; } } public char Letter { get { return 'p'; } } public bool ShowInNotifier { get { return true; } } public bool CanBePermissionAssigned { get { return true; } } public string Icon { get { return "editor/OPEN.gif"; } } public string Alias { get { return "Import from xMind"; } } public string JsFunctionName { get { return "openModal('dialogs/xMindImport.aspx?id=' + nodeID, 'Publish Management', 550, 480);"; } } public string JsSource { get { return string.Empty; } } #endregion }}3) Update the UmbracoAppTree table, my case I changed the following:TreeHandlerTypeFrom: loadNodeTypesTo: loadNodeTypesMenuTreeHandlerAssemblyFrom: umbracoTo: Vizioz.xMind2UmbracoAnd the result is:

Read the article

Configuring JPA Primary key sequence generators

- by pachunoori.vinay.kumar(at)oracle.com

This article describes the JPA feature of generating and assigning the unique sequence numbers to JPA entity .This article provides information on jpa sequence generator annotations and its usage. UseCase Description Adding a new Employee to the organization using Employee form should assign unique employee Id. Following description provides the detailed steps to implement the generation of unique employee numbers using JPA generators feature Steps to configure JPA Generators 1.Generate Employee Entity using "Entities from Table Wizard". View image2.Create a Database Connection and select the table "Employee" for which entity will be generated and Finish the wizards with default selections. View image 3.Select the offline database sources-Schema-create a Sequence object or you can copy to offline db from online database connection. View image 4.Open the persistence.xml in application navigator and select the Entity "Employee" in structure view and select the tab "Generators" in flat editor. 5.In the Sequence Generator section,enter name of sequence "InvSeq" and select the sequence from drop down list created in step3. View image 6.Expand the Employees in structure view and select EmployeeId and select the "Primary Key Generation" tab.7.In the Generated value section,select the "Use Generated value" check box ,select the strategy as "Sequence" and select the Generator as "InvSeq" defined step 4. View image Following annotations gets added for the JPA generator configured in JDeveloper for an entity To use a specific named sequence object (whether it is generated by schema generation or already exists in the database) you must define a sequence generator using a @SequenceGenerator annotation. Provide a unique label as the name for the sequence generator and refer the name in the @GeneratedValue annotation along with generation strategy For example,see the below Employee Entity sample code configured for sequence generation. EMPLOYEE_ID is the primary key and is configured for auto generation of sequence numbers. EMPLOYEE_SEQ is the sequence object exist in database.This sequence is configured for generating the sequence numbers and assign the value as primary key to Employee_id column in Employee table. @SequenceGenerator(name="InvSeq", sequenceName = "EMPLOYEE_SEQ") @Entity public class Employee implements Serializable { @Id @Column(name="EMPLOYEE_ID", nullable = false) @GeneratedValue(strategy = GenerationType.SEQUENCE, generator="InvSeq") private Long employeeId; } @SequenceGenerator @GeneratedValue @SequenceGenerator - will define the sequence generator based on a database sequence object Usage: @SequenceGenerator(name="SequenceGenerator", sequenceName = "EMPLOYEE_SEQ") @GeneratedValue - Will define the generation strategy and refers the sequence generator Usage: @GeneratedValue(strategy = GenerationType.SEQUENCE, generator="name of the Sequence generator defined in @SequenceGenerator")

Read the article

How to Customize the Internet Explorer 8 Title Bar

- by Mysticgeek

If you’re looking for a way to personalize IE 8, one method is to customize the Title Bar. Here we look at a simple Registry hack that will get the job done. The Internet Explorer Title Bar is displayed on the top of the browser with the site name followed by Windows Internet Explorer by default. If you have a small office you might want to change it to the company name, or just change it something more personal at home. Customize the IE 8 Title Bar Note: Before making any changes to the Registry, make sure to back it up. The first thing we need to do is open the Registry by typing regedit into the Search box in the Start Menu and hit Enter. With the Registry open, navigate to HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main. Then create a new String Value and name it Window Title. Right-click on the Window Title String and enter in whatever you want to display on the Title Bar in the Value data field and click OK. When you’re done, you should see the new String called Windows Title with whatever you entered in as the value. Close out of the Registry. Restart or launch Internet Explorer and you’ll now see your new text in the Title Bar. If you want to change it to something else, just go in and modify the Value data. If you want to switch it back to the default, just go back in and delete the string we created. A lot of times you’ll see corporate branding already in the title bar from your ISP or some computer company. To get rid of it, check out The Geek’s article on how to remove it. This should work with other versions of Internet Explorer as well. Similar Articles Productive Geek Tips Remove ISP Text or Corporate Branding from Internet Explorer Title BarReset All Internet Explorer 8 Settings to Fix Stability ProblemsMysticgeek Blog: A Look at Internet Explorer 8 Beta 1 on Windows XPDisable Third Party Extensions in Internet ExplorerToggle Flash On or Off in Internet Explorer the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Video Toolbox is a Superb Online Video Editor Fun with 47 charts and graphs Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall

Read the article

Going for Gold

- by Simple-Talk Editorial Team

There was a spring in the step of some members of our development teams here at Red Gate, on hearing that on five gold awards at 2012′s SQL Mag Community and Editors Choice Awards. And why not? It’s a nice recognition that their efforts were appreciated by many in the SQL Server community. The team at Simple-Talk don’t tend to spring, but even we felt a twinge of pride in the fact that SQL Scripts Manager received Gold for Editor’s Choice in the Best Free Tools category. The tool began life as a “Down Tools” project and is one that we’ve supported and championed in various articles on Simple-talk.com. Over a Cambridge Bitter in the Waggon and Horses, we’ve often reflected on how nice it would be to nominate our own awards. Of course, we’d have to avoid nominating Red Gate tools in each category, even the free ones, for fear of seeming biased, but we could still award other people’s free tools, couldn’t we? So allow us to set the stage for the annual Simple-Talk Community Tool awards… Onto the platform we shuffle, to applause from the audience; Chris in immaculate tuxedo, Alice in stunning evening gown, Dave and Tony looking vaguely uncomfortable, Andrew somehow distracted, as if his mind is elsewhere. Tony strides up to the lectern, and coughs lightly…”In the free-tool category we have the three nominations, and they are…” (rustle of the envelope opening) Ola Hallengren’s SQL Server Maintenance Solution (applause) Adam Machanic’s WhoIsActive (cheers, more applause) Brent Ozar’s sp_Blitz (much clapping) “Before we declare the winner, I’d like to say a few words in recognition of a grand tradition in a SQL Server community that continues to offer its members a steady supply of excellent, free tools. It hammers home the fundamental principle that a tool should solve a single, pressing and frustrating problem, but you should only ever build your own solution to that problem if you are certain that you cannot buy it, or that someone has not already provided it free. We have only three finalists tonight, but I feel compelled to mention a few other tools that we also use and appreciate, such as Microsoft’s Logparser, Open source Curl, Microsoft’s TableDiff.exe, Performance Analysis of Logs (PAL) Tool, SQL Server Cache Manager and SQLPSX.” “And now I’ll hand over to Alice to announce the winner.” Alice strides over to the microphone, tearing open the envelope. “The winner,” she pauses for dramatic effect “… is …Ola Hallengren’s SQL Server Maintenance Solution!” Queue much applause and consumption of champagne. Did we get it wrong? What free tool would you nominate? Let us know! Cheers, Simple-Talk Editorial Team (Andrew, Alice, Chris, Dave, Tony)

Read the article

2D Barcode Addendum

- by Tim Dexter

Having finally got my external drive back(long story) today from Oklahoma (thank you so much Sammy) Im back with a full compliment of Oracle and blogging tools at my disposal. I have missed JDeveloper this past week, which I have found, I immensely prefer over Eclipse (let the flaming commence :0) I use Zoundry Raven for writing articles and its not installed locally but on my external drove, so I have been soldiering on with the blog server's pain in the backside UI for writing. Now I have my favority editor back and things are calming down workwise, I will start to get the Excel template posts out. Today thou, a note about 2D barcode support or more specifically any barcode that needs some data manipulation before the barcode font is applied. I wrote about these fonts a long time back and laid out the java class you would need to write if you had an algorithm from the font manufacturer to use. I missed out a valuable point and James at Luminex fell into the trap. He was wanting to use the datamatrix font from IDAutomation but and had built the java class to be called from the RTF template but it was not encoding or at least did not appear to be. New debugging feature to the rescue. Kan over at the bipconsultng blog documented the feature a while back. Just adding <?xdo-debug-level:'STATEMENT'?> to my test template generated all the debug files in my c:\temp directory. No messing with files, just a simple command ... at last! Kan has documented the feature here. With the log in hand I spotted a java error stack referencing a missing code128a method, huh? Looking at James' class he had the following snippet: ENCODERS.put("code128a",mUtility.getClass().getMethod("code128a",clazz)); ENCODERS.put("code128b",mUtility.getClass().getMethod("code128b", clazz)); ENCODERS.put("code128c",mUtility.getClass().getMethod("code128c", clazz)); ENCODERS.put("pdf417",mUtility.getClass().getMethod("pdf417", clazz)); ENCODERS.put("datamatrix",mUtility.getClass().getMethod("datamatrix", clazz)); His class did not include the other code128 and pdf147 methods and BIP was expecting them. An easy fix, just comment them out, rebuild and deploy and the encoding started working. If you are hitting similar problems, check that class and ensure all of the referenced methods are available, if not, delete or get commenting. James now has purdy labels popping out that his hard ware can read, sweet!

Read the article

SQL SERVER – Tricks to Replace SELECT * with Column Names – SQL in Sixty Seconds #017 – Video

- by pinaldave

You might have heard many times that one should not use SELECT * as there are many disadvantages to the usage of the SELECT *. I also believe that there are always rare occasion when we need every single column of the query. In most of the cases, we only need a few columns of the query and we should retrieve only those columns. SELECT * has many disadvantages. Let me list a few and remaining you can add as a comment. Retrieves unnecessary columns and increases network traffic When a new columns are added views needs to be refreshed manually Leads to usage of sub-optimal execution plan Uses clustered index in most of the cases instead of using optimal index It is difficult to debug. There are two quick tricks I have discussed in the video which explains how users can avoid using SELECT * but instead list the column names. 1) Drag the columns folder from SQL Server Management Studio to Query Editor 2) Right Click on Table Name >> Script TAble AS >> SELECT To… >> Select option It is extremely easy to list the column names in the table. In today’s sixty seconds video, you will notice that I was able to demonstrate both the methods very quickly. From now onwards there should be no excuse for not listing ColumnName. Let me ask a question back – is there ever a reason to SELECT *? If yes, would you please share that as a comment. More on SELECT *: SQL SERVER – Solution – Puzzle – SELECT * vs SELECT COUNT(*) SQL SERVER – Puzzle – SELECT * vs SELECT COUNT(*) SQL SERVER – SELECT vs. SET Performance Comparison I encourage you to submit your ideas for SQL in Sixty Seconds. We will try to accommodate as many as we can. If we like your idea we promise to share with you educational material. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Database, Pinal Dave, PostADay, SQL, SQL Authority, SQL in Sixty Seconds, SQL Query, SQL Scripts, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology, Video

Read the article

SQL Developer: Why Do You Require Semicolons When Executing SQL in the Worksheet?

- by thatjeffsmith

There are many database tools out there that support Oracle database. Oracle SQL Developer just happens to be the one that is produced and shipped by the same folks that bring you the database product. Several other 3rd party tools out there allow you to have a collection of SQL statements in their editor and execute them without requiring a statement delimiter (usually a semicolon.) Let’s look at a quick example: select * from scott.emp select * from hr.employees delete from HR_COPY.BEER where HR_COPY.BEER.STATE like '%West Virginia% In some tools, you can simply place your cursor on say the 2nd statement and ask to execute that statement. The tool assumes that the blank line between it and the next statement, a DELETE, serves as a statement delimiter. This is not bad in and of itself. However, it is very important to understand how your tools work. If you were to try the same trick by running the delete statement, it would empty my entire BEER table instead of just trimming out the breweries from my home state. SQL Developer only executes what you ask it to execute You can paste this same code into SQL Developer and run it without problems and without having to add semicolons to your statements. Highlight what you want executed, and hit Ctrl-Enter If you don’t highlight the text, here’s what you’ll see: See the statement at the cursor vs what SQL Developer actually executed? The parser looks for a query and keeps going until the statement is terminated with a semicolon – UNLESS it’s highlighted, then it assumes you only want to execute what is highlighted. In both cases you are being explicit with what is being sent to the database. Again, there’s not necessarily a ‘right’ or ‘wrong’ debate here. What you need to be aware of is the differences and to learn new workflows if you are moving from other database tools to Oracle SQL Developer. I say, when in doubt, back away from the tool, especially if you’re in production. Oh, and to answer the original question… Because we’re trying to emulate SQL*Plus behavior. You end statements in SQL*Plus with delimiters, and the default delimiter is a semicolon.

Read the article

Add Artistic Effects to Your Pictures in Office 2010

- by DigitalGeekery

Do you ever wish you could add cool effects to images in your Office document pictures, but don’t have access to a graphics editor? Today we take a look at the Artistic Effects featire which is a new feature in Office 2010. Note: We will show you examples in Excel, but the Artistic Effect are available in Word, Excel, and PowerPoint. To insert a picture into your Office document, click the Picture button on the Insert tab. Once you import your picture, the Picture Tools format ribbon should be active. If not, click on the image. In the Adjust group, click on Artistic Effects. You will see a selection of effects previews images in the dropdown list. Hover your cursor over the effects to use Live Preview to see what your picture will look like if that effect is applied. When you find an effect you like, just click to apply it to the image. There are also some additional Artistic Effect Options. Each effect will have a it’s own set of available options that can be adjusted by moving the sliders left or right. If you find you want to undo an effect after it has been applied, simply select the None option from the previews under Artistic Effects. Conclusion Artistic Effects provides a really easy way to add professional looking effects to images in Office 2010 without the need to access graphics editing software. Check out some of our other Office 2010 articles like how to use advanced font ligatures, add video from the web to PowerPoint 2010, and preview before you paste in Office 2010. Similar Articles Productive Geek Tips Add Effects To Your Pictures in Word 2007Center Pictures and Other Objects in Office 2007 & 2010Tools to Help Post Content On Your WordPress BlogAdd Classic Polaroid Look to Your Digital picturesGive Your Desktop Artistic Flair with FotoSketcher TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup The iPod Revolution Ultimate Boot CD can help when disaster strikes Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox)

Read the article

Make the Firefox Awesome Bar Semi-Transparent Like Google Chrome

- by Matthew Guay

Would you like to make the Firefox Awesome Bar drop-down menu semi-transparent like in Google Chrome? Here’s a quick trick that can make your Firefox Awesome Bar a bit more awesome. When you type an address or search query into the address bar in Google Chrome, the drop-down list of history and search suggestions that appears is slightly transparent. Nothing extreme, but it adds a nice touch. Firefox’s Awesome bar, on the other hand, is fully opaque by default. We can change that with a simple change. Exit Firefox, then open your Firefox profile folder by entering the following in the address bar in Explorer or in the Run command: %appdata%\Mozilla\Firefox\Profiles\ Open the default folder, and then open the Chrome folder in it. Now, open the userChrome.css file in an editor such as Notepad. If you do not have a userChrome.css file, open the userChrome-example.css file instead. Now, add the following to the end of the file: #PopupAutoCompleteRichResult[type="autocomplete-richlistbox"]{ opacity: 0.9 !important;} You can change the opacity value, but 0.9 seemed the closest to Chrome’s transparency while keeping the text readable. Save the file as userChrome.css in that same folder. If you’re editing with Notepad, make sure to select to save as All Files so the file won’t be saved with a .txt extension. Open Firefox, and now your Awesome Bar’s drop-down list will be transparent. Actually, it may look even more awesome than Google Chrome’s address bar! Conclusion With this simple trick, you can make your Firefox Awesome bar a bit more awesome. With tweaks like this, it’s no wonder Firefox is still so popular. Special thanks to Daniel Spiewak for the tip! Similar Articles Productive Geek Tips Stupid Geek Tricks: Compare Your Browser’s Memory Usage with Google ChromeHow to Make Google Chrome Your Default BrowserEnable Vista Black Style Theme for Google Chrome in XPMake your Gnome Terminal Background (mostly)Transparent on UbuntuStop YouTube Videos from Automatically Playing in Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Use ILovePDF To Split and Merge PDF Files TimeToMeet is a Simple Online Meeting Planning Tool Easily Create More Bookmark Toolbars in Firefox Filevo is a Cool File Hosting & Sharing Site Get a free copy of WinUtilities Pro 2010 World Cup Schedule

Read the article

Important Note for Enablement Service Pack 1 for UPK 3.6.1

- by marc.santosusso

The following was originally posted to one of the UPK communities on LinkedIn. Since this post generated some feedback that this information was not well-known, I thought it would be good to repost, which I've done with permission from Earl Sullivan. This is an FYI for those who have UPK 3.6.1 and applied the Enablement Pack 1. There is a manual database update that is needed to be run. Here is the information: To correct an issue with permissioning in the Library, this Service Pack, issued in March 2010, also contains scripts to update the database on the Oracle Database or MicrosoftSQL server. Once you have run the Setup.exe file for the Service Pack, the necessary script files can be found at the root of the folder where the Developer is installed. These scripts must be run manually according to the instructions below. To update a database located on an Oracle Database server manually: Run the Setup.exe to install the files for the Service Pack. Start SQL*Plus and login with the system account. At the command prompt, enter the path to the AlterSchemaObjects.sql script located at the root of the folder where the Developer is installed. and append the following parameters: schema_owner - There is a limit of 20 characters on the schema owner name. You can find this information in the web.config file located in the Repository.WS in the folder where the server is installed. password - The existing schema owner password. Statement with generic parameters: @C:\AlterSchemaObjects.sql schema_owner password 4. Run the AlterSchemaObjects.sql script. To update a database located on a Microsoft SQL server manually: Run the Setup.exe to install the files for the Service Pack. Log in to the database using the database administrator account. Open and edit the AlterDBObjects.sql file located at the root of the folder where the Developer is installed. Replace the ODServer text with the username used when the database was installed. You can find this information in the web.config file located in the Repository.WS folder in the folder where the server is installed. Change the database from master to the name of the existing Developer database and run the AlterDBObjects.sql script. Note: The database name is the initial catalog in the connection string in the web.config file. Editor's note: The database update fixes a problem with permissions where the permissions for a user will be incorrectly updated when a group that the user was removed from has their permissions changed.

Read the article

Remove the Lock Icon from a Folder in Windows 7

- by Trevor Bekolay

If you’ve been playing around with folder sharing or security options, then you might have ended up with an unsightly lock icon on a folder. We’ll show you how to get rid of that icon without over-sharing it. The lock icon in Windows 7 indicates that the file or folder can only be accessed by you, and not any other user on your computer. If this is desired, then the lock icon is a good way to ensure that those settings are in place. If this isn’t your intention, then it’s an eyesore. To remove the lock icon, we have to change the security settings on the folder to allow the Users group to, at the very least, read from the folder. Right-click on the folder with the lock icon and select Properties. Switch to the Security tab, and then press the Edit… button. A list of groups and users that have access to the folder appears. Missing from the list will be the “Users” group. Click the Add… button. The next window is a bit confusing, but all you need to do is enter “Users” into the text field near the bottom of the window. Click the Check Names button. “Users” will change to the location of the Users group on your particular computer. In our case, this is PHOENIX\Users (PHOENIX is the name of our test machine). Click OK. The Users group should now appear in the list of Groups and Users with access to the folder. You can modify the specific permissions that the Users group has if you’d like – at the minimum, it must have Read access. Click OK. Keep clicking OK until you’re back at the Explorer window. You should now see that the lock icon is gone from your folder! It may be a small aesthetic nuance, but having that one folder stick out in a group of other folders is needlessly distracting. Fortunately, the fix is quick and easy, and does not compromise the security of the folder! Similar Articles Productive Geek Tips What is this "My Sharing Folders" Icon in My Computer and How Do I Remove It?Lock The Screen While in Full-Screen Mode in Windows Media PlayerHave Windows Notify You When You Accidentally Hit the Caps Lock KeyWhy Did Windows Vista’s Music Folder Icon Turn Yellow?Create Shutdown / Restart / Lock Icons in Windows 7 or Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools Track Daily Goals With 42Goals Video Toolbox is a Superb Online Video Editor

Read the article

JMS Step 5 - How to Create an 11g BPEL Process Which Reads a Message Based on an XML Schema from a JMS Queue

- by John-Brown.Evans

JMS Step 5 - How to Create an 11g BPEL Process Which Reads a Message Based on an XML Schema from a JMS Queue .jblist{list-style-type:disc;margin:0;padding:0;padding-left:0pt;margin-left:36pt} ol{margin:0;padding:0} .c12_5{vertical-align:top;width:468pt;border-style:solid;background-color:#f3f3f3;border-color:#000000;border-width:1pt;padding:5pt 5pt 5pt 5pt} .c8_5{vertical-align:top;border-style:solid;border-color:#000000;border-width:1pt;padding:5pt 5pt 0pt 5pt} .c10_5{vertical-align:top;width:207pt;border-style:solid;border-color:#000000;border-width:1pt;padding:5pt 5pt 5pt 5pt} .c14_5{vertical-align:top;border-style:solid;border-color:#000000;border-width:1pt;padding:0pt 5pt 0pt 5pt} .c21_5{background-color:#ffffff} .c18_5{color:#1155cc;text-decoration:underline} .c16_5{color:#666666;font-size:12pt} .c5_5{background-color:#f3f3f3;font-weight:bold} .c19_5{color:inherit;text-decoration:inherit} .c3_5{height:11pt;text-align:center} .c11_5{font-weight:bold} .c20_5{background-color:#00ff00} .c6_5{font-style:italic} .c4_5{height:11pt} .c17_5{background-color:#ffff00} .c0_5{direction:ltr} .c7_5{font-family:"Courier New"} .c2_5{border-collapse:collapse} .c1_5{line-height:1.0} .c13_5{background-color:#f3f3f3} .c15_5{height:0pt} .c9_5{text-align:center} .title{padding-top:24pt;line-height:1.15;text-align:left;color:#000000;font-size:36pt;font-family:"Arial";font-weight:bold;padding-bottom:6pt} .subtitle{padding-top:18pt;line-height:1.15;text-align:left;color:#666666;font-style:italic;font-size:24pt;font-family:"Georgia";padding-bottom:4pt} li{color:#000000;font-size:10pt;font-family:"Arial"} p{color:#000000;font-size:10pt;margin:0;font-family:"Arial"} h1{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:24pt;font-family:"Arial";font-weight:normal} h2{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:18pt;font-family:"Arial";font-weight:normal} h3{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:14pt;font-family:"Arial";font-weight:normal} h4{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:12pt;font-family:"Arial";font-weight:normal} h5{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:11pt;font-family:"Arial";font-weight:normal} h6{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:10pt;font-family:"Arial";font-weight:normal} Welcome to another post in the series of blogs which demonstrates how to use JMS queues in a SOA context. The previous posts were: JMS Step 1 - How to Create a Simple JMS Queue in Weblogic Server 11g JMS Step 2 - Using the QueueSend.java Sample Program to Send a Message to a JMS Queue JMS Step 3 - Using the QueueReceive.java Sample Program to Read a Message from a JMS Queue JMS Step 4 - How to Create an 11g BPEL Process Which Writes a Message Based on an XML Schema to a JMS Queue Today we will create a BPEL process which will read (dequeue) the message from the JMS queue, which we enqueued in the last example. The JMS adapter will dequeue the full XML payload from the queue. 1. Recap and Prerequisites In the previous examples, we created a JMS Queue, a Connection Factory and a Connection Pool in the WebLogic Server Console. Then we designed and deployed a BPEL composite, which took a simple XML payload and enqueued it to the JMS queue. In this example, we will read that same message from the queue, using a JMS adapter and a BPEL process. As many of the configuration steps required to read from that queue were done in the previous samples, this one will concentrate on the new steps. A summary of the required objects is listed below. To find out how to create them please see the previous samples. They also include instructions on how to verify the objects are set up correctly. WebLogic Server Objects Object Name Type JNDI Name TestConnectionFactory Connection Factory jms/TestConnectionFactory TestJMSQueue JMS Queue jms/TestJMSQueue eis/wls/TestQueue Connection Pool eis/wls/TestQueue Schema XSD File The following XSD file is used for the message format. It was created in the previous example and will be copied to the new process. stringPayload.xsd <?xml version="1.0" encoding="windows-1252" ?> <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://www.example.org" targetNamespace="http://www.example.org" elementFormDefault="qualified"> <xsd:element name="exampleElement" type="xsd:string"> </xsd:element> </xsd:schema> JMS Message After executing the previous samples, the following XML message should be in the JMS queue located at jms/TestJMSQueue: <?xml version="1.0" encoding="UTF-8" ?><exampleElement xmlns="http://www.example.org">Test Message</exampleElement> JDeveloper Connection You will need a valid Application Server Connection in JDeveloper pointing to the SOA server which the process will be deployed to. 2. Create a BPEL Composite with a JMS Adapter Partner Link In the previous example, we created a composite in JDeveloper called JmsAdapterWriteSchema. In this one, we will create a new composite called JmsAdapterReadSchema. There are probably many ways of incorporating a JMS adapter into a SOA composite for incoming messages. One way is design the process in such a way that the adapter polls for new messages and when it dequeues one, initiates a SOA or BPEL instance. This is possibly the most common use case. Other use cases include mid-flow adapters, which are activated from within the BPEL process. In this example we will use a polling adapter, because it is the most simple to set up and demonstrate. But it has one disadvantage as a demonstrative model. When a polling adapter is active, it will dequeue all messages as soon as they reach the queue. This makes it difficult to monitor messages we are writing to the queue, because they will disappear from the queue as soon as they have been enqueued. To work around this, we will shut down the composite after deploying it and restart it as required. (Another solution for this would be to pause the consumption for the queue and resume consumption again if needed. This can be done in the WLS console JMS-Modules -> queue -> Control -> Consumption -> Pause/Resume.) We will model the composite as a one-way incoming process. Usually, a BPEL process will do something useful with the message after receiving it, such as passing it to a database or file adapter, a human workflow or external web service. But we only want to demonstrate how to dequeue a JMS message using BPEL and a JMS adapter, so we won’t complicate the design with further activities. However, we do want to be able to verify that we have read the message correctly, so the BPEL process will include a small piece of embedded java code, which will print the message to standard output, so we can view it in the SOA server’s log file. Alternatively, you can view the instance in the Enterprise Manager and verify the message. The following steps are all executed in JDeveloper. Create the project in the same JDeveloper application used for the previous examples or create a new one. Create a SOA Project Create a new project and choose SOA Tier > SOA Project as its type. Name it JmsAdapterReadSchema. When prompted for the composite type, choose Empty Composite. Create a JMS Adapter Partner Link In the composite editor, drag a JMS adapter over from the Component Palette to the left-hand swim lane, under Exposed Services. This will start the JMS Adapter Configuration Wizard. Use the following entries: Service Name: JmsAdapterRead Oracle Enterprise Messaging Service (OEMS): Oracle WebLogic JMS AppServer Connection: Use an application server connection pointing to the WebLogic server on which the JMS queue and connection factory mentioned under Prerequisites above are located. Adapter Interface > Interface: Define from operation and schema (specified later) Operation Type: Consume Message Operation Name: Consume_message Consume Operation Parameters Destination Name: Press the Browse button, select Destination Type: Queues, then press Search. Wait for the list to populate, then select the entry for TestJMSQueue , which is the queue created in a previous example. JNDI Name: The JNDI name to use for the JMS connection. As in the previous example, this is probably the most common source of error. This is the JNDI name of the JMS adapter’s connection pool created in the WebLogic Server and which points to the connection factory. JDeveloper does not verify the value entered here. If you enter a wrong value, the JMS adapter won’t find the queue and you will get an error message at runtime, which is very difficult to trace. In our example, this is the value eis/wls/TestQueue . (See the earlier step on how to create a JMS Adapter Connection Pool in WebLogic Server for details.) Messages/Message SchemaURL: We will use the XSD file created during the previous example, in the JmsAdapterWriteSchema project to define the format for the incoming message payload and, at the same time, demonstrate how to import an existing XSD file into a JDeveloper project. Press the magnifying glass icon to search for schema files. In the Type Chooser, press the Import Schema File button. Select the magnifying glass next to URL to search for schema files. Navigate to the location of the JmsAdapterWriteSchema project > xsd and select the stringPayload.xsd file. Check the “Copy to Project” checkbox, press OK and confirm the following Localize Files popup. Now that the XSD file has been copied to the local project, it can be selected from the project’s schema files. Expand Project Schema Files > stringPayload.xsd and select exampleElement: string . Press Next and Finish, which will complete the JMS Adapter configuration.Save the project. Create a BPEL Component Drag a BPEL Process from the Component Palette (Service Components) to the Components section of the composite designer. Name it JmsAdapterReadSchema and select Template: Define Service Later and press OK. Wire the JMS Adapter to the BPEL Component Now wire the JMS adapter to the BPEL process, by dragging the arrow from the adapter to the BPEL process. A Transaction Properties popup will be displayed. Set the delivery mode to async.persist. This completes the steps at the composite level. 3 . Complete the BPEL Process Design Invoke the BPEL Flow via the JMS Adapter Open the BPEL component by double-clicking it in the design view of the composite.xml, or open it from the project navigator by selecting the JmsAdapterReadSchema.bpel file. This will display the BPEL process in the design view. You should see the JmsAdapterRead partner link in the left-hand swim lane. Drag a Receive activity onto the BPEL flow diagram, then drag a wire (left-hand yellow arrow) from it to the JMS adapter. This will open the Receive activity editor. Auto-generate the variable by pressing the green “+” button and check the “Create Instance” checkbox. This will result in a BPEL instance being created when a new JMS message is received. At this point it would actually be OK to compile and deploy the composite and it would pick up any messages from the JMS queue. In fact, you can do that to test it, if you like. But it is very rudimentary and would not be doing anything useful with the message. Also, you could only verify the actual message payload by looking at the instance’s flow in the Enterprise Manager. There are various other possibilities; we could pass the message to another web service, write it to a file using a file adapter or to a database via a database adapter etc. But these will all introduce unnecessary complications to our sample. So, to keep it simple, we will add a small piece of Java code to the BPEL process which will write the payload to standard output. This will be written to the server’s log file, which will be easy to monitor. Add a Java Embedding Activity First get the full name of the process’s input variable, as this will be needed for the Java code. Go to the Structure pane and expand Variables > Process > Variables. Then expand the input variable, for example, "Receive1_Consume_Message_InputVariable > body > ns2:exampleElement”, and note variable’s name and path, if they are different from this one. Drag a Java Embedding activity from the Component Palette (Oracle Extensions) to the BPEL flow, after the Receive activity, then open it to edit. Delete the example code and replace it with the following, replacing the variable parts with those in your sample, if necessary.: System.out.println("JmsAdapterReadSchema process picked up a message"); oracle.xml.parser.v2.XMLElement inputPayload = (oracle.xml.parser.v2.XMLElement)getVariableData( "Receive1_Consume_Message_InputVariable", "body", "/ns2:exampleElement"); String inputString = inputPayload.getFirstChild().getNodeValue(); System.out.println("Input String is " + inputPayload.getFirstChild().getNodeValue()); Tip. If you are not sure of the exact syntax of the input variable, create an Assign activity in the BPEL process and copy the variable to another, temporary one. Then check the syntax created by the BPEL designer. This completes the BPEL process design in JDeveloper. Save, compile and deploy the process to the SOA server. 3. Test the Composite Shut Down the JmsAdapterReadSchema Composite After deploying the JmsAdapterReadSchema composite to the SOA server it is automatically activated. If there are already any messages in the queue, the adapter will begin polling them. To ease the testing process, we will deactivate the process first Log in to the Enterprise Manager (Fusion Middleware Control) and navigate to SOA > soa-infra (soa_server1) > default (or wherever you deployed your composite to) and click on JmsAdapterReadSchema [1.0] . Press the Shut Down button to disable the composite and confirm the following popup. Monitor Messages in the JMS Queue In a separate browser window, log in to the WebLogic Server Console and navigate to Services > Messaging > JMS Modules > TestJMSModule > TestJMSQueue > Monitoring. This is the location of the JMS queue we created in an earlier sample (see the prerequisites section of this sample). Check whether there are any messages already in the queue. If so, you can dequeue them using the QueueReceive Java program created in an earlier sample. This will ensure that the queue is empty and doesn’t contain any messages in the wrong format, which would cause the JmsAdapterReadSchema to fail. Send a Test Message In the Enterprise Manager, navigate to the JmsAdapterWriteSchema created earlier, press Test and send a test message, for example “Message from JmsAdapterWriteSchema”. Confirm that the message was written correctly to the queue by verifying it via the queue monitor in the WLS Console. Monitor the SOA Server’s Output A program deployed on the SOA server will write its standard output to the terminal window in which the server was started, unless this has been redirected to somewhere else, for example to a file. If it has not been redirected, go to the terminal session in which the server was started, otherwise open and monitor the file to which it was redirected. Re-Enable the JmsAdapterReadSchema Composite In the Enterprise Manager, navigate to the JmsAdapterReadSchema composite again and press Start Up to re-enable it. This should cause the JMS adapter to dequeue the test message and the following output should be written to the server’s standard output: JmsAdapterReadSchema process picked up a message. Input String is Message from JmsAdapterWriteSchema Note that you can also monitor the payload received by the process, by navigating to the the JmsAdapterReadSchema’s Instances tab in the Enterprise Manager. Then select the latest instance and view the flow of the BPEL component. The Receive activity will contain and display the dequeued message too. 4 . Troubleshooting This sample demonstrates how to dequeue an XML JMS message using a BPEL process and no additional functionality. For example, it doesn’t contain any error handling. Therefore, any errors in the payload will result in exceptions being written to the log file or standard output. If you get any errors related to the payload, such as Message handle error ... ORABPEL-09500 ... XPath expression failed to execute. An error occurs while processing the XPath expression; the expression is /ns2:exampleElement. ... etc. check that the variable used in the Java embedding part of the process was entered correctly. Possibly follow the tip mentioned in previous section. If this doesn’t help, you can delete the Java embedding part and simply verify the message via the flow diagram in the Enterprise Manager. Or use a different method, such as writing it to a file via a file adapter. This concludes this example. In the next post, we will begin with an AQ JMS example, which uses JMS to write to an Advanced Queue stored in the database. Best regards John-Brown Evans Oracle Technology Proactive Support Delivery

Read the article

JavaFX, Google Maps, and NetBeans Platform

- by Geertjan

Thanks to a great new article by Rob Terpilowski, and other work and research he describes in that article, it's now trivial to introduce a map component to a NetBeans Platform application. Making use of the GMapsFX library, as described in Rob's article, which provides a JavaFX API for Google Maps, you can very quickly knock this application together. Click to enlarge the image. Here's all the code (from Rob's article): @TopComponent.Description( preferredID = "MapTopComponent", persistenceType = TopComponent.PERSISTENCE_ALWAYS ) @TopComponent.Registration(mode = "editor", openAtStartup = true) @ActionID(category = "Window", id = "org.map.MapTopComponent") @ActionReference(path = "Menu/Window" /*, position = 333 */) @TopComponent.OpenActionRegistration( displayName = "#CTL_MapWindowAction", preferredID = "MapTopComponent" ) @NbBundle.Messages({ "CTL_MapWindowAction=Map", "CTL_MapTopComponent=Map Window", "HINT_MapTopComponent=This is a Map window" }) public class MapWindow extends TopComponent implements MapComponentInitializedListener { protected GoogleMapView mapComponent; protected GoogleMap map; private static final double latitude = 52.3667; private static final double longitude = 4.9000; public MapWindow() { setName(Bundle.CTL_MapTopComponent()); setToolTipText(Bundle.HINT_MapTopComponent()); setLayout(new BorderLayout()); JFXPanel panel = new JFXPanel(); Platform.setImplicitExit(false); Platform.runLater(() -> { mapComponent = new GoogleMapView(); mapComponent.addMapInializedListener(this); BorderPane root = new BorderPane(mapComponent); Scene scene = new Scene(root); panel.setScene(scene); }); add(panel, BorderLayout.CENTER); } @Override public void mapInitialized() { //Once the map has been loaded by the Webview, initialize the map details. LatLong center = new LatLong(latitude, longitude); MapOptions options = new MapOptions(); options.center(center) .mapMarker(true) .zoom(9) .overviewMapControl(false) .panControl(false) .rotateControl(false) .scaleControl(false) .streetViewControl(false) .zoomControl(false) .mapType(MapTypeIdEnum.ROADMAP); map = mapComponent.createMap(options); //Add a couple of markers to the map. MarkerOptions markerOptions = new MarkerOptions(); LatLong markerLatLong = new LatLong(latitude, longitude); markerOptions.position(markerLatLong) .title("My new Marker") .animation(Animation.DROP) .visible(true); Marker myMarker = new Marker(markerOptions); MarkerOptions markerOptions2 = new MarkerOptions(); LatLong markerLatLong2 = new LatLong(latitude, longitude); markerOptions2.position(markerLatLong2) .title("My new Marker") .visible(true); Marker myMarker2 = new Marker(markerOptions2); map.addMarker(myMarker); map.addMarker(myMarker2); //Add an info window to the Map. InfoWindowOptions infoOptions = new InfoWindowOptions(); infoOptions.content("<h2>Center of the Universe</h2>") .position(center); InfoWindow window = new InfoWindow(infoOptions); window.open(map, myMarker); } } Awesome work Rob, will be useful for many developers out there.

Read the article

What does your Python development workbench look like?

- by Fabian Fagerholm

First, a scene-setter to this question: Several questions on this site have to do with selection and comparison of Python IDEs. (The top one currently is What IDE to use for Python). In the answers you can see that many Python programmers use simple text editors, many use sophisticated text editors, and many use a variety of what I would call "actual" integrated development environments – a single program in which all development is done: managing project files, interfacing with a version control system, writing code, refactoring code, making build configurations, writing and executing tests, "drawing" GUIs, and so on. Through its GUI, an IDE supports different kinds of workflows to accomplish different tasks during the journey of writing a program or making changes to an existing one. The exact features vary, but a good IDE has sensible workflows and automates things to let the programmer concentrate on the creative parts of writing software. The non-IDE way of writing large programs relies on a collection of tools that are typically single-purpose; they do "one thing well" as per the Unix philosophy. This "non-integrated development environment" can be thought of as a workbench, supported by the OS and generic interaction through a text or graphical shell. The programmer creates workflows in their mind (or in a wiki?), automates parts and builds a personal workbench, often gradually and as experience accumulates. The learning curve is often steeper than with an IDE, but those who have taken the time to do this can often claim deeper understanding of their tools. (Whether they are better programmers is not part of this question.) With advanced editor-platforms like Emacs, the pieces can be integrated into a whole, while with simpler editors like gedit or TextMate, the shell/terminal is typically the "command center" to drive the workbench. Sometimes people extend an existing IDE to suit their needs. What does your Python development workbench look like? What workflows have you developed and how do they work? For the first question, please give the main "driving" program – the one that you use to control the rest (Emacs, shell, etc.) the "small tools" -- the programs you reach for when doing different tasks For the second question, please describe what the goal of the workflow is (eg. "set up a new project" or "doing initial code design" or "adding a feature" or "executing tests") what steps are in the workflow and what commands you run for each step (eg. in the shell or in Emacs) Also, please describe the context of your work: do you write small one-off scripts, do you do web development (with what framework?), do you write data-munching applications (what kind of data and for what purpose), do you do scientific computing, desktop apps, or something else? Note: A good answer addresses the perspectives above – it doesn't just list a bunch of tools. It will typically be a long answer, not a short one, and will take some thinking to produce; maybe even observing yourself working.

Read the article

Now Shipping! NetAdvantage for .NET 2010 Volume 3!

The new NetAdvantage Ultimate includes all four Line of Business user interface control sets for ASP .NET, Windows Forms, WPF and Silverlight plus two advanced Data Visualization UI control sets for WPF and Silverlight. With six NetAdvantage products in one robust package, Infragistics® gives you hundreds of controls and infinite development possibilities. Unified XAML Product Strategy-Share Code, Get More Controls In the 10.3 release, Infragistics continues to deliver code parity between the XAML platforms, WPF and Silverlight. In the line of business toolsets, Infragistics introduces the new xamSchedule™, full-featured, Outlook® 2010-style schedule controls, and the new xamDataTree™, a data bound tree view that comfortably handles tens of thousands of tree nodes. Mimicking our Silverlight Drag and Drop Framework, the WPF Drag and Drop Framework CTP empowers you to add your own rich touches to your applications. Track Users' Behaviors New to all NetAdvantage Silverlight controls is the Infragistics Analytics Framework (IGAF), which empowers you to track user behavior in RIAs running on Silverlight 4. Building on the Microsoft® Silverlight Analytics Framework, with IGAF you can analyze the user's behaviors to ensure the experience you want to deliver. NetAdvantage for Windows Forms--New Office® 2010 Ribbon and Application Menu 2010 Create new experiences with Windows Forms. Now with Office 2010 styling, NetAdvantage for Windows Forms has new features such as Microsoft® Office 2010 ribbon and enhanced Infragistics.Excel to export the contents of the high performance WinGrid™ into Microsoft Excel® 2010. The new Windows Message Support enables Infragistics standalone editor controls to process numerous Windows® OS messages, allowing them to respond just like native controls to changes in the Windows environment. Create Faster Web 2.0 Experiences with NetAdvantage for ASP .NET Infragistics continues to push the envelope to deliver the fastest ASP .NET WebForms controls available on the market. Our lightning fast ASP .NET grids are now enhanced with XPS/PDF Exporting and Summary Rows. This release also includes support for jQuery Templating (as a CTP) within our WebDataGrid™ and WebDataTree™ controls allowing you to quickly cut down overall page size. Deliver Business Intelligence with Power, Flexibility and the Office 2010 Experience NetAdvantage for WPF Data Visualization and NetAdvantage for Silverlight Data Visualization help you deliver flexible, powerful and usable end user experiences in Business Intelligence applications. Both suites include the Pivot Grid that delivers the full power of online analytical processing (OLAP) to present multi-dimensional data, sliced and diced in cross-tabulated form for end users to drill down into, interact with and easily extract meaning from the data. Mapping Made Easy 10.3 marks the official release of the WPF Data Visualization xamMap™ control to map anything and everything from geographic to geo-spacial mapping data. Map layers allow you to add successive levels of detail, navigational panes for panning in all directions, color swatch panes that facilitate value scales like Choropleth shading, and scale panes allowing users to zoom-in and out. Both toolsets introduce the first of many relationship maps! With the xamOrgChart™ CTP you can map out organizational charts of up to 50K employees, competitive brackets (think World Cup) and any other relational, organizational map your application needs. http://www.infragistics.com span.fullpost {display:none;}

Read the article

ACORD LOMA Session Highlights Policy Administration Trends

- by [email protected]

Helen Pitts, senior product marketing manager for Oracle Insurance, attended and is blogging from the ACORD LOMA Insurance Forum this week. Above: Paul Vancheri, Chief Information Officer, Fidelity Investments Life Insurance Company. Vancheri gave a presentation during the ACORD LOMA Insurance Systems Forum about the key elements of modern policy administration systems and how insurers can mitigate risk during legacy system migrations to safely introduce new technologies. When I had a few particularly challenging honors courses in college my father, a long-time technology industry veteran, used to say, "If you don't know how to do something go ask the experts. Find someone who has been there and done that, don't be afraid to ask the tough questions, and apply and build upon what you learn." (Actually he still offers this same advice today.) That's probably why my favorite sessions at industry events, like the ACORD LOMA Insurance Forum this week, are those that include insight on industry trends and case studies from carriers who share their experiences and offer best practices based upon their own lessons learned. I had the opportunity to attend a particularly insightful session Wednesday as Craig Weber, senior vice president of Celent's Insurance practice, and Paul Vancheri, CIO of Fidelity Life Investments, presented, "Managing the Dynamic Insurance Landscape: Enabling Growth and Profitability with a Modern Policy Administration System." Policy Administration Trends Growing the business is the top issue when it comes to IT among both life and annuity and property and casualty carriers according to Weber. To drive growth and capture market share from competitors, carriers are looking to modernize their core insurance systems, with 65 percent of those CIOs participating in recent Celent research citing plans to replace their policy administration systems. Weber noted that there has been continued focus and investment, particularly in the last three years, by software and technology vendors to offer modern, rules-based, configurable policy administration solutions. He added that these solutions are continuing to evolve with the ongoing aim of helping carriers rapidly meet shifting business needs--whether it is to launch new products to market faster than the competition, adapt existing products to meet shifting consumer and /or regulatory demands, or to exit unprofitable markets. He closed by noting the top four trends for policy administration either in the process of being adopted today or on the not-so-distant horizon for the future: Underwriting and service desktops New business automation Convergence of ultra-configurable and domain content-rich systems Better usability and screen design Mitigating the Risk When Making the Decision to Modernize Third-party analyst research from advisory firms like Celent was a key part of the due diligence process for Fidelity as it sought a replacement for its legacy policy administration system back in 2005, according to Vancheri. The company's business opportunities were outrunning system capability. Its legacy system had not been upgraded in several years and was deficient from a functionality and currency standpoint. This was constraining the carrier's ability to rapidly configure and bring new and complex products to market. The company sought a new, modern policy administration system, one that would enable it to keep pace with rapid and often unexpected industry changes and ahead of the competition. A cross-functional team that included representatives from finance, actuarial, operations, client services and IT conducted an extensive selection process. This process included deep documentation review, pilot evaluations, demonstrations of required functionality and complex problem-solving, infrastructure integration capability, and the ability to meet the company's desired cost model. The company ultimately selected an adaptive policy administration system that met its requirements to: Deliver ease of use - eliminating paper and rework, while easing the burden on representatives to sell and service annuities Provide customer parity - offering Web-based capabilities in alignment with the company's focus on delivering a consistent customer experience across its business Deliver scalability, efficiency - enabling automation, while simplifying and standardizing systems across its technology stack Offer desired functionality - supporting Fidelity's product configuration / rules management philosophy, focus on customer service and technology upgrade requirements Meet cost requirements - including implementation, professional services and licenses fees and ongoing maintenance Deliver upon business requirements - enabling the ability to drive time to market for new products and flexibility to make changes Best Practices for Addressing Implementation Challenges Based upon lessons learned during the company's implementation, Vancheri advised carriers to evaluate staffing capabilities and cultural impacts, review business requirements to avoid rebuilding legacy processes, factor in dependent systems, and review policies and practices to secure customer data. His formula for success: upfront planning + clear requirements = precision execution. Achieving a Return on Investment Vancheri said the decision to replace their legacy policy administration system and deploy a modern, rules-based system--before the economic downturn occurred--has been integral in helping the company adapt to shifting market conditions, while enabling growth in its direct channel sales of variable annuities. Since deploying its new policy admin system, the company has reduced its average time to market for new products from 12-15 months to 4.5 months. The company has since migrated its other products to the new system and retired its legacy system, significantly decreasing its overall product development cycle. From a processing standpoint Vancheri noted the company has achieved gains in automation, information, and ease of use, resulting in improved real-time data edits, controls for better quality, and tax handling capability. Plus, with by having only one platform to manage, the company has simplified its IT environment and is well positioned to deliver system enhancements for greater efficiencies. Commitment to Continuing the Investment In the short and longer term future Vancheri said the company plans to enhance business functionality to support money movement, wire automation, divorce processing on payout contracts and cost-based tracking improvements. It also plans to continue system upgrades to remain current as well as focus on further reducing cycle time, driving down maintenance costs, and integrating with other products. Helen Pitts is senior product marketing manager for Oracle Insurance focused on life/annuities and enterprise document automation.

Read the article

Cooking with Wessty: HTML 5 and Visual Studio

- by David Wesst

The hardest part about using a new technology, such as HTML 5, is getting to what features are available and the syntax. One way to learn how to use new technologies is to adapt your current development to help you use the technology in comfort of your own development environment. For .NET Web Developers, that environment is usually Visual Studio 2010. This technique intends on showing you how to get HTML 5 Intellisense working in your current version of Visual Studio 2008 or 2010, making it easier for you to start using HTML 5 features in your current .NET web development projects. Quick Note According to the Visual Web Developer team at Microsoft, the Visual Studio 2010 SP1 beta has support for both HTML 5 and CSS 3. If you are willing to try out the bleeding edge update from Microsoft, then you won’t need this technique. --- Ingredients Visual Studio 2008 or 2010 Your favourite HTML 5 compliant browser (e.g. Internet Explorer 9) Administrator privileges, or the ability to install Visual Studio Extensions in your development environment. Directions Download the HTML 5 Intellisense for Visual Studio 2008 and 2010 extension from the Visual Studio Extension Gallery. Install it. Open Visual Studio. Open up a web file, such as an HTML or ASPX file. he HTML Source Editing toolbar should have appeared. (Optional) If it did not appear, you can activate it through the main menu by selecting View, then Toolbars, and then select HTML Source Editing if it does not have a checkbox beside it. (NOTE: If there is a checkbox, then the toolbar is enabled) In the HTML Source Editing toolbar, open up the validation schema drop box, and select HTML 5. Et voila! You now have HTML 5 intellisense enabled to help you get started in adding HTML 5 awesomeness to your web sites and web applications. Optional – Setting HTML 5 Validation Options At this point, you may want to select how Visual Studio shows validation errors. You can do that in the Options Menu. To get to the Options Menu… In the main menu select Tools, then Options. In the Options window, select and expand Text Editor, then HTML, followed by selecting Validation. Resources HTML 5 Intellisense for Visual Studio 2008 and 2010 extenstion Visual Studio Extension Gallery Visual Studio 2010 SP1 Beta This post also appears at http://david.wes.st

Read the article

SQL SERVER – Number-Crunching with SQL Server – Exceed the Functionality of Excel

- by Pinal Dave

Imagine this. Your users have developed an Excel spreadsheet that extracts data from your SQL Server database, manipulates that data through the use of Excel formulas and, possibly, some VBA code which is then used to calculate P&L, hedging requirements or even risk numbers. Management comes to you and tells you that they need to get rid of the spreadsheet and that the results of the spreadsheet calculations need to be persisted on the database. SQL Server has a very small set of functions for analyzing data. Excel has hundreds of functions for analyzing data, with many of them focused on specific financial and statistical calculations. Is it even remotely possible that you can use SQL Server to replace the complex calculations being done in a spreadsheet? Westclintech has developed a library of functions that match or exceed the functionality of Excel’s functions and contains many functions that are not available in EXCEL. Their XLeratorDB library of functions contains over 700 functions that can be incorporated into T-SQL statements. XLeratorDB takes advantage of the SQL CLR architecture introduced in SQL Server 2005. SQL CLR permits managed code to be compiled into the database and run alongside built-in SQL Server functions like COUNT or SUM. The Westclintech developers have taken advantage of this architecture to bring robust analytical functions to the database. In our hypothetical spreadsheet, let’s assume that our users are using the YIELD function and that the data are extracted from a table in our database called BONDS. Here’s what the spreadsheet might look like. We go to column G and see that it contains the following formula. Obviously, SQL Server does not offer a native YIELD function. However, with XLeratorDB we can replicate this calculation in SQL Server with the following statement: SELECT *, wct.YIELD(CAST(GETDATE() AS date),Maturity,Rate,Price,100,Frequency,Basis) AS YIELD FROM BONDS This produces the following result. This illustrates one of the best features about XLeratorDB; it is so easy to use. Since I knew that the spreadsheet was using the YIELD function I could use the same function with the same calling structure to do the calculation in SQL Server. I didn’t need to know anything at all about the mechanics of calculating the yield on a bond. It was pretty close to cut and paste. In fact, that’s one way to construct the SQL. Just copy the function call from the cell in the spreadsheet and paste it into SMS and change the cell references to column names. I built the SQL for this query by starting with this. SELECT * ,YIELD(TODAY(),B2,C2,D2,100,E2,F2) FROM BONDS I then changed the cell references to column names. SELECT * --,YIELD(TODAY(),B2,C2,D2,100,E2,F2) ,YIELD(TODAY(),Maturity,Rate,Price,100,Frequency,Basis) FROM BONDS Finally, I replicated the TODAY() function using GETDATE() and added the schema name to the function name. SELECT * --,YIELD(TODAY(),B2,C2,D2,100,E2,F2) --,YIELD(TODAY(),Maturity,Rate,Price,100,Frequency,Basis) ,wct.YIELD(GETDATE(),Maturity,Rate,Price,100,Frequency,Basis) FROM BONDS Then I am able to execute the statement returning the results seen above. The XLeratorDB libraries are heavy on financial, statistical, and mathematical functions. Where there is an analog to an Excel function, the XLeratorDB function uses the same naming conventions and calling structure as the Excel function, but there are also hundreds of additional functions for SQL Server that are not found in Excel. You can find the functions by opening Object Explorer in SQL Server Management Studio (SSMS) and expanding the Programmability folder under the database where the functions have been installed. The Functions folder expands to show 3 sub-folders: Table-valued Functions; Scalar-valued functions, Aggregate Functions, and System Functions. You can expand any of the first three folders to see the XLeratorDB functions. Since the wct.YIELD function is a scalar function, we will open the Scalar-valued Functions folder, scroll down to the wct.YIELD function and and click the plus sign (+) to display the input parameters. The functions are also Intellisense-enabled, with the input parameters displayed directly in the query tab. The Westclintech website contains documentation for all the functions including examples that can be copied directly into a query window and executed. There are also more one hundred articles on the site which go into more detail about how some of the functions work and demonstrate some of the extensive business processes that can be done in SQL Server using XLeratorDB functions and some T-SQL. XLeratorDB is organized into libraries: finance, statistics; math; strings; engineering; and financial options. There is also a windowing library for SQL Server 2005, 2008, and 2012 which provides functions for calculating things like running and moving averages (which were introduced in SQL Server 2012), FIFO inventory calculations, financial ratios and more, without having to use triangular joins. To get started you can download the XLeratorDB 15-day free trial from the Westclintech web site. It is a fully-functioning, unrestricted version of the software. If you need more than 15 days to evaluate the software, you can simply download another 15-day free trial. XLeratorDB is an easy and cost-effective way to start adding sophisticated data analysis to your SQL Server database without having to know anything more than T-SQL. Get XLeratorDB Today and Now! Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: Excel

Read the article

Best development architecture for a small team of programmers ( WAMP Stack )

- by Tio

Hi all.. I'm in the first month of work in a new company.. and after I met the two programmer's and asked how things are organized in terms of projects inside the company, they simply shrug their shoulders, and said that nothing is organized.. I think my jaw hit the ground that same time.. ( I know some, of you think I should quit, but I'm on a privileged position, I'm the most experienced there, so there's room for me to grow inside the company, and I'm taking the high road ).. So I talked to the IT guy, and one of the programmers, and maybe this week I'm going to get a server all to myself to start organizing things. I've used various architectures in my previous work experiences, on one I was developing in a server on the network ( no source control of course ).. another experience I had was developing in my local computer, with no server on the network, just source control. And at home, I have a mix of the two, everything I code is on a server on the network, and I have those folders under source control, and I also have a no-ip account configured on that server so I can access it everywhere and I can show the clients anything. For me I think this last solution ( the one I have at home ) is the best: Network server with WAMP stack. The server as a public IP so we can access it by domain name. And use subdomains for each project. Everybody works directly on the network server. I think the problem arises, when two or more people want to work on the same project, in this case the only way to do this is by using source control and local repositories, this is great, but I think this turns development a lot more complicated. In the example I gave, to make a change to the code, I would simply need to open the file in my favorite editor, make the change, alter the database, check in the changes into source control and presto all done. Using local repositories, I would have to get the latest version, run the scripts on the local database to update it, alter the file, alter the database, check in the changes to the network server, update the database on the network server, see if everything is running well on the network server, and presto all done, to me this seems overcomplicated for a change on a simple php page. I could share the database for the local development and for the network server, that sure would help. Maybe the best way to do this is just simply: Network server with WAMP stack ( test server so to speak ), public server accessible trough the web. LAMP stack on every developer computer ( minus the database ) We develop locally, test, then check in the changes into the server test and presto. What do you think? Maybe I should start doing this at home.. Thanks and best regards... Edit: I'm sorry I made a mistake and switched WAMP with LAMP, sorry about that..

Read the article

How to Add Control Panel to “My Computer” in Windows 7 or Vista

- by The Geek

Back in the Windows XP days, you could easily add Control Panel to My Computer with a simple checkbox in the folder view settings. Windows 7 and Vista don’t make this quite as easy, but there’s still a way to get it back. To make this tweak, we’ll be doing a quick registry hack, but there’s a downloadable version provided as well. Manual Registry Tweak to Add Control Panel Open up regedit.exe through the start menu search or run box, and then browse down to the following key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\MyComputer\NameSpace Now that you’re there, you’ll need to right-click and create a new key… If you want to add the regular Control Panel view, with the categories, you’ll need to use one GUID as the name of the key. If you want the icon view instead, you can use the other key. Here they are: Category View: {26EE0668-A00A-44D7-9371-BEB064C98683} Icon View: {21EC2020-3AEA-1069-A2DD-08002B30309D} Once you’re done, it should look like this: Now over in the Computer view, just hit the F5 key to refresh the panel, and you should see the new icon pop up in the list: Now when you click on the icon you’ll be taken to Control Panel. If you didn’t know how to change the view before, you can use the drop-down box on the right-hand side to switch between Category and icon view. Downloadable Registry Hack Rather than deal with manual registry editing, you can simply download the file, extract it, and then either double-click on the AddCategoryControlPanel.reg to add the Category view icon, or AddIconControlPanel.reg to add the other icon. There’s an uninstall script provided for each. Download ControlPanelMyComputer Registry Hack from howtogeek.com Similar Articles Productive Geek Tips Disable User Account Control (UAC) the Easy Way on Win 7 or VistaHow To Figure Out Your PC’s Host Name From the Command PromptRestore Missing Desktop Icons in Windows 7 or VistaNew Vista Syntax for Opening Control Panel Items from the Command-lineAdd Registry Editor to Control Panel TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause

Read the article

links for 2011-03-08

- by Bob Rhubart

The Empowered Business "Someone needs to be the enterprise parent that asks the question, “do you really need that?” It may be a shiny new thing, but does it make a difference in the ability to accomplish the strategy and goals?" - Enterprise Architect Todd Biske (tags: enterprisearchitecture) Knowledge Workers in the British Raj "While we’ve used technology to change business, business has also evolved to the point that it’s changing how we think about and use technology." - Peter Evans Greenwood (tags: enterprisearchitecture enterprise2.0) Arun Gupta, Miles to go ...: OTN Developer Day Boston 2011 - Slides & Trip Report Arun Gupta shares slides from his Developer Day presentations. (tags: oracle otn java) Use WLST to Delete All JMS Messages From a Destination (James Bayer's Blog) James Bayer responds to a question. (tags: oracle otn weblogic jms) Triangle Circle Square: Apex in the Amazon Cloud Scott Wesley shares several links to resources covering Oracle Apex on an Amazon EC2 instance. (tags: oracle apex ec2 amazon cloud) William Vambenepe: Reading IBM's proposed standard for Cloud Architecture The always entertaining William Vambenepe gives IBM's proposed Cloud standards the full Ebert. (tags: oracle cloud ibm standards) Government Information Group Cloud Computing Research Study "The twin pressures of reduced budgets and the need for greater efficiency have led the federal government to strongly promote cloud computing as a solution whenever possible." (tags: cloudcomputing cloud) The Ron Batra Blog: Technology Whispers: Top 10 Reasons to go ExaData "Continuing my exploration of ExaData, I thought I'd take a minute to consolidate my thoughts into key reasons for which Oracle ExaData could be a good fit for your needs." - Oracle ACE Director Ron Batra (tags: oracle oracleace exadata) Oracle WebCenter: Composite Applications & Mash-Ups (Oracle Enterprise 2.0 Blog) "The new Business Mash-up editor allows business users to take any Oracle Application or 3rd party application and wire the backend data sources or APIs to a rich set of visualizations and reuse them in mashups." (tags: oracle webcenter enterprise2.0) Antonio Romero: Great Discussion of ETL and ELT Tooling in TDWI Linkedin Group Antonio says: "There’s a great discussion of ETL and ELT tooling going on in the official TDWI Linkedin group, under the heading 'How Sustainable is SQL for ETL?' It delves into a wide range of topics." (tags: oracle linkedin etl elt) YouTube - Bunny Inc. - Episode 1. Mr. CIO meets Mr. Executive Manager Yes, it's a commercial. But it's well done and it's funny. (tags: e20 enterprise2.0 webcenter) Markus Eisele: Both Weblogic and Glassfish are strategic products for Oracle Oracle ACE Director Markus Eisele shares selected quotes pulled from the recent TechCast Live interview with Oracle's Anil Gaur and Adam Leftik (tags: oracle java weblogic glassfish) How to become an Oracle SOA expert? (SOA Partner Community Blog) Jurgan Kress shares info and links for those interested in capitalizing on SOA. (tags: oracle soa)

Read the article

AI for a mixed Turn Based + Real Time battle system - Something "Gambit like" the right approach?

- by Jason L.

This is maybe a question that's been asked 100 times 1,000 different ways. I apologize for that :) I'm in the process of building the AI for a game I'm working on. The game is a turn based one, in the vein of Final Fantasy but also has a set of things that happen in real time (reactions). I've experimented with FSM, HFSMs, and Behavior Trees. None of them felt "right" to me and all felt either too limiting or too generic / big. The idea I'm toying with now is something like a "Rules engine" that could be likened to the Gambit system from Final Fantasy 12. I would have a set of predefined personalities. Each of these personalities would have a set of conditions it would check on each event (Turn start, time to react, etc). These conditions would be priority ordered, and the first one that returns true would be the action I take. These conditions can also point to a "choice" action, which is just an action that will make a choice based on some Utility function. Sort of a mix of FSM/HFSM and a Utility Function approach. So, a "gambit" with the personality of "Healer" may look something like this: (ON) Ally HP = 0% - Choose "Relife" spell (ON) Ally HP < 50% - Choose Heal spell (ON) Self HP < 65% - Choose Heal spell (ON) Ally Debuff - Choose Debuff Removal spell (ON) Ally Lost Buff - Choose Buff spell Likewise, a "gambit" with the personality of "Agressor" may look like this: (ON) Foe HP < 10% - Choose Attack skill (ON) Foe any - Choose target - Choose Attack skill (ON) Self Lost Buff - Choose Buff spell (ON) Foe HP = 0% - Taunt the player What I like about this approach is it makes sense in my head. It also would be extremely easy to build an "AI Editor" with an approach like this. What I'm worried about is.. would it be too limiting? Would it maybe get too complicated? Does anyone have any experience with AIs in Turn Based games that could maybe provide me some insight into this approach.. or suggest a different approach? Many thanks in advance!!!

Read the article

The Politics of Junk Filtering

- by mikef

If the national postal service, such as the Royal Mail in the UK, were to go through your letters and throw away all the stuff it considered to be junk instead of delivering it to you, you might be rather pleased until you discovered that it took a too liberal decision about what was junk. Catalogs you'd asked for? Junk! Requests from charities? Who needs them! Parcels from competing carriers? Toss them away! The possibility for abuse for an agency that was in a monopolistic position is just too scary to tolerate. After all, the postal service could charge 'consultancy fees' to any sender who wanted to guarantee that his stuff got delivered, or they could even farm this out to other companies. Because Microsoft Outlook is just about the only email client used by the international business community in the west, its' SPAM filter is the final arbiter as to what gets read. My Outlook 2007, set to the default settings, junks all the perfectly innocent email newsletters that I subscribe to. Whereas Google Mail, Yahoo, and LIVE are all pretty accurate in detecting spam, Outlook makes all sorts of silly mistakes. The documentation speaks techno-babble about 'advanced heuristics', but the result boils down to an inaccurate mess. The more that Microsoft fiddles with it, the stickier the mess. To make matters worse, it still lets through obvious spam. The filter is occasionally updated along with other automatic 'security' updates you opt for automatic updates. As an editor for a popular online publication that provides a newsletter service, this is an obvious source of frustration. We follow all the best-practices we know about. We ensure that it is a trivial task to opt out of receiving it. We format the newsletter to the requirements of the Service Providers. We follow up, and resolve, every complaint. As a result, it gets delivered. It is galling to discover that, after all that effort, Outlook then often judges the contents to be junk on a whim, so you don't get to see it. A few days ago, Microsoft published the PST file format specification, under pressure from a European Union interoperability investigation by ECIS (the European Committee for Interoperable Systems). The objective was that other applications could then access existing PST files so as to migrate from existing Outlook installations to other solutions. Joaquín Almunia, the current competition commissioner, should now turn his attention to the more subtle problems of Microsoft Outlook. The Junk problem seems to have come from clumsy implementation of client-side spam filtering rather than from deliberate exploitation of a monopoly on the desktop email client for businesses, but it is a growing problem nonetheless. Cheers, Michael Francis

Read the article

Scan Your Thumb Drive for Viruses from the AutoPlay Dialog

- by Mysticgeek

It’s always a good idea to scan someone’s flash drive for viruses when you use it on your PC. Today we look at how to use Microsoft Security Essentials to scan thumb drives via the AutoPlay dialog. Editor Note: This technique was created by our friend Ramesh Srinivasan from the winhelponline tech blog. If you haven’t done so already, download and install Microsoft Security Essentials (link below), which has earned the How-To Geek official endorsement. Next download the mseautoplay.zip (link below). Unzip the file to view its contents. Then move the msescan.vbs script file into the Windows directory. Next double-click on the mseautoplay.reg file… Click Yes to the warning dialog window asking if you’re sure you want to add to the registry. After it’s added you’ll get a confirmation message…click OK. Now when you pop in a thumb drive, when AutoPlay comes up you will have the options to scan it with MSE first. MSE starts the scan of the thumb drive… You can use this to scan any removable media. Here is an example of the ability to scan a DVD with MSE before opening any files. You can also go into Control Panel and set it as a default option of AutoPlay. Open Control Panel, View by Large icons, and click on AutoPlay. Notice that now when you go to change the default options for different types of media, Scanning with MSE is now included in the dropdown lists. Remove Settings If you want to remove the MSE AutoPlay Handler, Ramesh was kind enough to create an undo registry file. Double-click on undo.reg from the original MSE AutoPlay folder and click yes to the message to remove the setting. Then you will need to go into the Windows directory and manually delete the msescan.vbs script file. This is an awesome trick which will allow you to scan your thumb drives and other removable media from the AutoPlay dialog. We tested it out on XP, Vista, and Windows 7 and it works perfectly on each one. Download mseautoplay.zip Download Microsoft Security Essentials Read Our Review of MSE Similar Articles Productive Geek Tips Disable AutoPlay in Windows VistaFind Your Missing USB Drive on Windows XPDisable Autoplay of Audio CDs and USB DrivesHow To Remove Antivirus Live and Other Rogue/Fake Antivirus MalwareScan Files for Viruses Before You Download With Dr.Web TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010 Daily Motivator (Firefox)

Search Results

Search found 5950 results on 238 pages for 'formula editor'.

Page 196/238 | < Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203 | Next Page >

- by Ben Griswold

- by Vizioz Limited

- by pachunoori.vinay.kumar(at)oracle.com

- by Mysticgeek

- by Simple-Talk Editorial Team

- by Tim Dexter

- by pinaldave

- by thatjeffsmith

- by DigitalGeekery

- by Matthew Guay

- by marc.santosusso

- by Trevor Bekolay

- by John-Brown.Evans

- by Geertjan

- by Fabian Fagerholm

- by [email protected]

- by David Wesst

- by Pinal Dave

- by Tio

- by The Geek

- by Bob Rhubart

- by Jason L.

- by mikef

- by Mysticgeek

< Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203 | Next Page >