Search Results

Search found 18191 results on 728 pages for 'single board'.

Page 196/728 | < Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >

• Motherboard Issue - 3 Beep Bios (memory error) despite new RAM

  - by Glenn

  I have an Intel dG43RK motherboard, bought new and sealed, and have tried two different brands and speeds of RAM with a 3-beep BIOS indicating a memory error, which also occurs without RAM installed (as it should). The memory tried is; 1x4GB 1333 Kingston HyperX DDR3 RAM (New and Sealed) 2x4GB Team Elite 1066 DDR3 RAM (New and Sealed) I have tried multiple configurations and seating layouts and still no luck. I also have a GT520 graphics card on board as I dislike in-built graphics in most cases and had it at hand (also new and sealed). The only used parts are the CPU, which worked in my previous tower and was directly taken from the PC into the new set-up and the CPU Fan which will be replaced with a new fan in the foreseeable future once this is resolved. I've run out of ideas myself and any help is appreciated.

  Read the article

• Connect Ralink RT2571 to new PC

  - by tuelsch

  I bought a new PC with the AsRock Z77 Extreme 4m motherboard, since this has no WLAN, I extracted the WLAN card from my old PC, a Ralink RT 2571 WF, an connected it to the new board. I downloaded the driver from http://www.ralinktech.com/en/04_support/support.php?sn=500 (the RT257x USB one) and installed it. In the device manager, an unknown device shows up, but if I tell it to search its driver, it does not find it (searching in the whole C partition). The Ralink Diagnostic Test says that the WLAN Card is disabled. I'm using Windows 7 64bit professional. Can anyone suggest me a solution to get my WLAN running?

  Read the article

• solving network connection problem on xp

  - by doug

  Hi there I feel so stupid, because I have to fix my dad computer(which was mine years ago). So it is an old computer on which I have installed windows xp and the drivers for main-board. The device manager says that I have no more problems with the hardware. That computer has to connect to a router from my room but it doesn't. On ping 192.168.2.1 I get "Request time out"., The other computers are connecting to that router. Only the old computer doesn't connect to the LAN and later to the internet. Also it doesn't get a good IP(from the same class). After running ipconfig command I know that i have an IP with 169.... What can I do? Do you have any tips for me?

  Read the article

• Motherboard: Intel S5520HCR s1366 SSI EEB

  - by Crazy_Bash

  I'm building a storage server for online video streaming. I thought about adding two SSD drive for a OS. other 15*(12 SATA & 3 SSD) drives i want to build with aufs XFS and ethernet 4GB/sec network. But I'm confused a little. S5520HCR board supports 6, SATA/300, RAID: 0, 1, 10, Intel ICH10R. Does it mean i can use SATAIII HDD? I'm planing on buying SEAGATE SV35 Series (3.5, 3??, 64??, SATA III-600). also my Chassis supports up-to 16 sata and the motherboard only 6 what kind of sata controller should i use? What's better in terms of performance 1366 or 2011 socket? My server so far: AIC RSC-3EG-80R-SA1S-2 3U Motherboard: Intel S5520HCR s1366 SSI EEB Kingston DDR3 8192Mb PC3-10600 1333MHz (KVR1333D3N9/8G) Seagate 3000GB 64MB 3.5" 7200rpm SATAIII (ST3000DM001) Kingston 480GB SSD 2.5" SATAIII Intel E1G44HTBLK Intel Xeon E5606 2133MHz/L3-8192Kb/QPI s1366 tray SERVER ACC CARD SAS PCIE 16P HBA 9201-16I LSI00244 SGL LSI

  Read the article

• How can I inject clips [ads] in a playlist every x minutes (even if previous clip is not over)

  - by azera

  Sorry for the title, I find it quite hard to describe what I want to do in a single sentence We have a few TV here linked to our computer, which we use to display clips about what we do in our sport center, what you should do to stay in good form ect ... It's running non stop, actually though vlc + playlist. Those main clips are 1-2 hours long and we have about 20 of them looping randomly all day. We would like to inject ads for some of our sponsiored products every now and then during the playlist, like say one ad every 15 minute. Does any one know how we can do that, while keeping the main clip random order ? I thought about encoding the whole thing as a single movie with ads inserted, but then it's not random. So we can put the ads in the playlist itself right ? Except clips are several hours long and we want that more often than that. Cutting the main clips in several pieces seems to work but that kind of sucks as new clips are made every month. If any one has an idea, thanks a lot

  Read the article

• Formal separation marker of syslog events?

  - by Server Horror

  I've been looking at RFC5424 to find the formally specified marker that will end a syslog event. Unfortunately I couldn't find it. So If I wanted to implement some small syslog server that reacts on certain messages what is the marker that ends a message (yes commonly an event is a single line, but I just couldn't find it in the specification) Clarification: I call it event because I associate a message with a single line. An event could possibly be some thing like Type: foo Source: webservers whereas a message to me is this: Type: foo Source: webservers http://tools.ietf.org/html/rfc5424#section-6 defines: SYSLOG-MSG = HEADER SP STRUCTURED-DATA [SP MSG] neither STRUCTURED-DATA nor MSG tell me how these fields end. Especially MSG is defined as as MSG-ANY / MSG-UTF8 which expands to virtually anything. There's nothing that says a newline marks the end (or an 8 or an a for that matter). Given the example messages (section 6.5): This is one valid message, or 2 valid messages depending on wether you say that a HEADER element must never occur in any MSG element: literal whitespace <34>1 2003-10-11T22:14:15.003Z mymachine.example.com su - ID47 - <34>1 2003-10-11T22:14:15.003Z mymachine.example.com su - ID47 | is this an end marker? \t stands for a tab <34>1 2003-10-11T22:14:15.003Z mymachine.example.com su - ID47 -\t<34>1 2003-10-11T22:14:15.003Z mymachine.example.com su - ID47 | is this an end marker? \n stands for a newline <34>1 2003-10-11T22:14:15.003Z mymachine.example.com su - ID47 -\n<34>1 2003-10-11T22:14:15.003Z mymachine.example.com su - ID47 | is this an end marker? Either I'm misreading the RFC or there just isn't any mention. The sizes specified in the RFC just say what the minimum length is expected that I can work with...

  Read the article

• /dev/shm (shared memory) on linux

  - by Kirzilla

  Hello, Let's imagine that we have 8Gb of RAM on server. I'm mounting /dev/shm with 4Gb on board. mount -o remount,size=4G /dev/shm Will this memory be strictly reserved for shared memory or if /dev/shm is empty this memory could be used by regular applications (web server, php etc.)? PS:Sorry for my English. I'm asking it because I've just checked df -h and found tmpfs 6.0G 0 6.0G 0% /dev/shm on 8Gb RAM sever. I don't know who made this setup, but it seems to me awful. Thank you!

  Read the article

• mpstat on slackware 13.0 shows no utilization

  - by conartist6

  As the title says, the mpstat command, executed on Slack 13.0 continuously shows almost no processor utilization of any sort. In fact none of the output ever seems to change at all. The system is dual processor board with two hyperthreaded P4 Xeons. Any ideas? 08:50:06 PM CPU %user %nice %sys %iowait %irq %soft %steal %idle intr/s 08:50:06 PM all 0.38 0.00 0.03 0.03 0.00 0.00 0.00 99.56 1510.46 08:50:06 PM 0 0.50 0.00 0.05 0.10 0.00 0.01 0.00 99.33 11.90 08:50:06 PM 1 0.32 0.00 0.03 0.01 0.00 0.00 0.00 99.64 0.00 08:50:06 PM 2 0.38 0.00 0.03 0.01 0.00 0.00 0.00 99.58 0.00 08:50:06 PM 3 0.29 0.00 0.02 0.00 0.00 0.00 0.00 99.68 0.00 This is, literally, the only output I can get from the program. No values change ever.

  Read the article

• Function key taken by another program, how to default it

  - by Milox

  Everytime I press the F11 key it opens up a browser window with the same URL. This happens anywhere I press it and I need this key to have it's default behavior because I use it to program on Visual Studio (Windows 7). Any ideas why this is happening and how to go back to default function keys?, I haven't installed anything that I remember can cause this behavior. This is a standard Dell desktop key board, no multimedia keys, like this one: Firing URL is http://argos:8080/Login.jsp?jsessionid=55rh3obsahm9m seems like one of our company's internal addresses but IT guys say they have no idea about it. I don't see any suspicious software that can be causing this.

  Read the article

• Install multiport module on iptables

  - by tarteauxfraises

  I'am trying to install "fail2ban" on Cubidebian, a Debian port for Cubieboard (A raspberry like board). The following rule failed due to "-m multiport --dports ssh" options (It works, when i run manually the command without multiple options). $ iptables -I INPUT -p tcp -m multiport --dports ssh -j fail2ban-ssh" iptables: No chain/target/match by that name. When i make a cat on "/proc/net/ip_tables_matches", i see that multiport module is not loaded: $ cat /proc/net/ip_tables_matches u32 time string statistic state owner pkttype mac limit helper connmark mark ah icmp socket socket quota2 policy length iprange ttl hashlimit ecn udplite udp tcp What can i do to compile or to enable the multiport module? Thanks in advance for your help

  Read the article

• What are the typical methods used to scale up/out email storage servers?

  - by nareshov

  Hi, What I've tried: I have two email storage architectures. Old and new. Old: courier-imapds on several (18+) 1TB-storage servers. If one of them show signs of running out of disk space, we migrate a few email accounts to another server. the servers don't have replicas. no backups either. New: dovecot2 on a single huge server with 16TB (SATA) storage and a few SSDs we store fresh mails on the SSDs and run a doveadm purge to move mails older than a day to the SATA disks there is an identical server which has a max-15min-old rsync backup from the primary server higher-ups/management wanted to pack in as much storage as possible per server in order to minimise the cost of SSDs per server the rsync'ing is done because GlusterFS wasn't replicating well under that high small/random-IO. scaling out was expected to be done with provisioning another pair of such huge servers on facing disk-crunch issues like in the old architecture, manual moving of email accounts would be done. Concerns/doubts: I'm not convinced with the synchronously-replicated filesystem idea works well for heavy random/small-IO. GlusterFS isn't working for us yet, I'm not sure if there's another filesystem out there for this use case. The idea was to keep identical pairs and use DNS round-robin for email delivery and IMAP/POP3 access. And if one the servers went down for whatever reasons (planned/unplanned), we'd move the IP to the other server in the pair. In filesystems like Lustre, I get the advantage of a single namespace whereby I do not have to worry about manually migrating accounts around and updating MAILHOME paths and other metadata/data. Questions: What are the typical methods used to scale up/out with the traditional software (courier-imapd / dovecot)? Do traditional software that store on a locally mounted filesystem pose a roadblock to scale out with minimal "problems"? Does one have to re-write (parts of) these to work with an object-storage of some sort - such as OpenStack object storage?

  Read the article

• Splitting an HTTP request into multiple byte-range requests

  - by redpola

  I have arrived at the unusual situation of having two completely independent Internet connections to my home. This has the advantage of redundancy etc but the drawback that both connections max out at about 6Mb/s. So one individual outbound http request is directed by my "intelligent gateway" (TP-LINK ER6120) out over one or the other connection for its lifetime. This works fine over complex web pages and utilises both external connects fine. However, single-http-request downloads are limited to the maximum rate of one of the two connections. So I'm thinking, surely I can setup some kind of proxy server to direct all my http requests to. For each incoming http request, the proxy server will issue multiple byte-range requests for the desired data and manage the reassembly and delivery of that data to the client's request. I can see this has some overhead, and also some edge cases where there will be blocking problems waiting for data. I also imagine webmasters of single-servers would rather I didn't hit them with 8 byte-range requests instead of one request. How can I achieve this http request deconstruct/reconstruction? Or am I just barking mad?

  Read the article

• How to start MSSQL Server with corrupt model db

  - by Jordan McGuigan

  After moving some databases around (restoring, deleting, etc) we experienced an issue creating new databases. Specifically, When trying to create a new database MSSQL Server it failed because the "The database 'model' is marked RESTORING and is in a state that does not allow recovery to be run". As some online solutions suggested, we tried to Start and Stop the MSSQL Service. Service would not restart because "Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive" (FYI: the drive has 100gb of free space). Tried restarting the machine the MSSQL Server is running on. When the server came back online, we received the same error. We have tried deleting tempdb.mdf and restoring the modeldb from the templates folder, but neither of these solved the issue. We are unable to connect to the database, even in single user mode. Many of the online solutions have us running SQL commands against the server, but we are unable to connect (even in single user mode) to the DB to run commands against the server. Specific error messages: Database 'model' cannot be opened. It is in the middle of a restore. (Microsoft SQL Server, Error: 927) The SQL Server (MSSQLSERVER) service is starting. The SQL Server (MSSQLSERVER) service could not be started. A service specific error occurred: 1814. We need the server up and running again ASAP.

  Read the article

• On Linux/Unix, does .tar.gz versus .zip matter?

  - by rwallace

  Cross-platform programs are sometimes distributed as .tar.gz for the Unix version and .zip for the Windows version. This makes sense when the contents of each must be different. If, however, the contents are going to be the same, it would be simpler to just have one download. Windows prefers .zip because that's the format it can handle out of the box. Does it matter on Unix? That is, I tried today unzipping a file on Ubuntu Linux, and it worked fine; is there any problem with this on any current Unix-like operating system, or is it okay to just provide a .zip file across the board?

  Read the article

• Is it possible to trace someone using Google during an online exam?

  - by George

  I happen to be a professor at a reputed college. I want to design an online exam for over 1000 students via around 50 computers right after the vacation ends. Now the problem is that I have heard that many students use Google on a different tab to find answers when no invigilator is around. I want to know if there is a way to backtrace it after the exams via some kind of history or any other possible way. In our university there is a standard system. I am not good with computers but I will try to explain. Each computer uses mozilla to connect to a server centrally located via an IP. The students open it and enter a unique ID and password to start the exams. Many questions are jumbled and different groups of students give exam in a different time slot. Is there any way to trace it since I want to set an example for students so they won't cheat and give exams in an honest way. Additional details: Since the number of computers are less than the number of students, more than 10 students are going to use a single computer on a single day over a period of 10 hours. After this, if I check the history (and let's say someone even forgot to delete the history and I see it), will I able to figure out who among the 10 has done it? Moreover, is it even practical and feasible?

  Read the article

• Resolution of monitor is not supported by motherboard

  - by Sandesh

  I have Desktop with configuration Pentium 4,945 intel chipset board,dual booting with win 7 and ubuntu 10.10 (no graphics card) Recently i purchased Dell IN2020M 20" with native resolution of 1600x900 but my display allow maximum of 1024x768 because of this when i play any video in full screen mode it doesn't play smoothly or frames are refreshed jerkily I have tried updating my VGA driver but its doesn't helping me much. Is there any way to solve this problem ? 1if i want to replace monitor what maximum resolution should i buy ? 2if i want to upgrade(graphics card/motherboard) my desktop what is the minimum configuration to support the current system. Thanks in advance

  Read the article

• What are the advantages of registered memory?

  - by odd parity

  I'm browsing for a few low-end servers for a startup and I'm a bit confused about the different memory types. The advantage of ECC is clear - single-bit error correction. When it comes to registered memory it seems more vague, especially in systems that support both registered and unbuffered memory. A Google search mostly finds copies of the Wikipedia article, which states that registered memory chips "...place less electrical load on the memory controller and allow single systems to remain stable with more memory modules than they would have otherwise". However I can't find any quantification of this. What I'm wondering about is: Is registered memory an improvement over unbuffered when it comes to soft error rate, or is it purely about the maximum number of modules supported? If yes, at what point (amount of modules or GB of memory) do these improvements start to become noticeable? For a specific example, the HP ProLiant DL 120 G6 server manual states that maximum supported memory configuration is 16 GB unbuffered (4x4GB) or 12 GB registered (6x2GB). In this case I'd rather have the extra 4GB of memory if the reliability difference is negligible.

  Read the article

• Bay Speaker Panel Installation

  - by JordanD

  I purchased a bay speaker panel that has a molex connector and a sound connector. Do I need to run the sound connector through my tower and somehow out the back into the IO panel? Or is there supposed to be a place on my motherboard for it to connect to? This is a replacement for normal desktop speakers for me to save desk space. Edit: Is there an adapter for the sound cable to the mother board? If so; what is it called? Thanks

  Read the article

• 2x ATI FireMV 2250 not working

  - by Brett Rigby

  I've just bought 2x ATI FireMV 2250 cards from a reputable seller on ebay... one is a PCI-E x1 and the other is a PCI-E x16. Problem is, neither works in my Dell Vostro 220 PC... Both cards appear to not work. Is there something I'm missing? The seller used an anti-static bag for one of the cards, syaing that: "You Must connect this graphics board to the computer's power supply" but there's no socket for that, nor any indication. I have contacted the seller, but thought I'd raise it here, as it seems strange that two cards can be non-functioning.

  Read the article

• How to check the OS is running on bare metal and not in virtualized environment created by BIOS?

  - by Arkadi Shishlov

  Is there any software available as a Linux, *BSD, or Windows program or boot-image to check (or guess with good probability) the environment an operating system is loaded onto is genuine bare metal and not already virtualized? Given recent information from various sources, including supposed to be E.Snowden leaks, I'm curious about the security of my PC-s, even about those that don't have on-board BMC. How it could be possible and why? See for example Blue Pill, and a number of papers. With a little assistance from network card firmware, which is also loadable on popular card models, such hypervisor could easily spy on me resulting in PGP, Tor, etc. exercises futile.

  Read the article

• Wildcard subdomain setup ... want to change host IP throws off client A records... what to do...

  - by Joe

  Here is the current set up (in a nutshell). The site is set up with a wildcard subdomain, so *.website.com is accessible. Clients can then domain map their own domains with an A record to the server IP address and it will translate the to appropriate *.website.com with re directions and env variables in htaccess. Everything is working perfect... but now comes the problem. The site has grown larger than a single DQC Xeon server can handle at peak times. Looking at cloud options seems tempting, but clients are pointing their domains to a single IP address with the A record (our server). Now, this was probably bad planing from the start, but the question is, if this was to be done today, how would we set it up so that clients use a CNAME perhaps to point their domains to our server rather than an A record. And, if that is not possible for the root domain, how can we then use multiple IP addresses on our side to translate the incoming http request? Complex enough? Hope I've explained it well!

  Read the article

• Redirecting and Remapping with mod_rewrite

  - by Droid646197

  First of all, am new to doing back-end server admin.. I have a main website being served on at certain IP. I have a blog address that lives on another IP, which was used on wordpress.com. When a user typed in blog.domain.com it would resolve to the Wordpress.com site. Since coming on board (two months) they wanted me to bring the blog in house. So, I set up a wordpress install at domain.com/blog. I would like blog.domain.com (different ip) to resolve to domain.com/blog but still using blog.domain.com is this possible with Apache and mod_rewrite?

  Read the article

• I can't set the resolution to that recommended by my monitor

  - by F4r-20

  Firstly, I have looked here but didn't find what I needed. I have a Dell Optiplex 380 only using the on-board graphics (believe its the Intel G41 Express Chipset) but I can't seem to get the resolution right. The monitor I'm using (HP LE1901w) wants me to use 1440x900 but the only options I get are: 1600 x 1200 1366 x 768 1360 x 768 1280 x 1024 1280 x 960 1152 x 864 1024 x 768 800 x 600 So it will allow me to go higher or lower but not 1440x900. I've tried getting the driver from various different sources (Dell, Intel, Windows 7 Update) but still can't get that option. Does anybody know what else I can try?

  Read the article

• On Linux/Unix, does .tar.gz versus .zip matter?

  - by rwallace

  Cross-platform programs are sometimes distributed as .tar.gz for the Unix version and .zip for the Windows version. This makes sense when the contents of each must be different. If, however, the contents are going to be the same, it would be simpler to just have one download. Windows prefers .zip because that's the format it can handle out of the box. Does it matter on Unix? That is, I tried today unzipping a file on Ubuntu Linux, and it worked fine; is there any problem with this on any current Unix-like operating system, or is it okay to just provide a .zip file across the board?

  Read the article

• Recovering data from a Silicon Image SiI3114 RAID

  - by Isaac Truett

  I have a set of 3 disks in RAID 5 originally created with a Silicon Image SiI3114 on-board RAID controller. The old motherboard is dead. The new motherboard (which has a different raid controller) won't boot from the array. I have no reason to believe that the drives are damaged or corrupted. I'm 99% sure that the problem is that the new controller isn't compatible or I'm not setting it up properly. Is it possible to recover data from the drives using a different controller? Would a PCI card like this one allow me to read from the array again?

  Read the article

< Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >