Search Results

Search found 9235 results on 370 pages for 'social networking'.

Page 196/370 | < Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >

• VirtualBox with Ubuntu Server guest can't ping outside

  - by Danidan

  Here's my situation: an Ubuntu 12.04 Host running VirtualBox; two guest VMs running Ubuntu Server 12.04 home network, so my Host pc has a wireless connection to the router of my ISP. My problem is in one of the virtual machines: it has 3 NICs, one in NAT mode and the others in Host Only mode. My purpose is to use eth0 (NAT) for Internet access and eth1, eth2 (Host Only) for management of internal virtual network (eth1 uses a VBoxNet with this IP 192.168.69.254). Whenever I try to $ping 8.8.8.8 I get Destination Host Unreachable. While if I $ping 192.168.69.10, that is the IP of the other VM, it works. I can't also ping my Host nor my router My /etc/network/interfaces file is: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 192.168.69.1 netmask 255.255.255.0 auto eth2 iface ifconfig $IFACE 0.0.0.0 up up ip link set $IFACE promisc on down ip link set $IFASE promisc off down ifconfig $IFACE down $route -n returns: Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 10.0.2.2 0.0.0.0 UG 100 0 0 eth0 10.0.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.69.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 Forgetting for now what eth2 needs to do and its setup, why I can't go outside the Host box? What can I do to help you helping me? :-)

  Read the article

• Everytime I ping my server, it is pinging localhost instead?

  - by esac

  I recently setup a new server for use with SQL. When I tried to connect via SSMS remotely, it failed. When I pinged it, it is pinging localhost, what is going on here? Please let me know if more details will help. It is Windows Server 2008. C:\>ping 0x7F000001 Pinging 127.0.0.1 with 32 bytes of data: Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Ping statistics for 127.0.0.1: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms

  Read the article

• Can't connect to the internet in Windows Vista

  - by Kola

  I have a Windows Vista computer which i have used for about 2 years without any issues. Recently, i started having problems connecting to the internet with this Vista computer. My other XP Computers are fine and can connect to the Internet. Regardless of wired or wireless connection, i am unable to get the Vista computer connected to the web. The Status remains "Limited" for IPv4 and IPv6. It also shows unidentified Public Network, and is able to connect to the router. However, there's a disconnection between the router and the internet. Any help will be greatly appreciated, i have been on this for 4 weeks now.

  Read the article

• Weird WLAN connection

  - by tuelsch

  I assembled my first computer on my own. As I realised it had no WLAN (AsRock Z77 Extreme 4m) I bought a WLAN stick (ZyXel NWD 2105), plugged it in, started the setup from the CD and it worked, until I restarted the PC. That's when the problems started. The stick is able to connect to the router (P-660HN-F1Z) and the connection is stable, but not the internet access. In estimately 1 minute intervals there might be a short connection timeframe and dropbox or windows update are able to download some data, but as soon as I try to open a website the internet access is away. Note that the connection to the router does not shut down and remains stable at around 80-90%. The problem is definetly located on my pc, because with my laptop and phone the connection is stable and fast. Because I was so pissed off, I bought a EW-7612PIn V2 (PCI-E WLAN adapter), same problem. Now the weird thing is, if I don't use the PC for about 2 days, start it up, there is internet access (happened with both the stick and the PCI-E card). A bit slow, but it does not get away just like that, until I shut it down. Then, no matter how many times I restart, it won't come back. I googled a lot but now I'm at the end with my latin. Has anyone had a similar problem and resolved it? Technical details: Motherboard: AsRock Z77 Extreme 4M OS: Windows 7 professional 64bit Stick: Zyxel wireless N adapter NWD2105 PCI-E card: Edimax EW-7612PIn V2 Router: ZyXel P-660HN-F1Z Windows-IP-Konfiguration Hostname . . . . . . . . . . . . : xyz Primäres DNS-Suffix . . . . . . . : Knotentyp . . . . . . . . . . . . : Hybrid IP-Routing aktiviert . . . . . . : Nein WINS-Proxy aktiviert . . . . . . : Nein Drahtlos-LAN-Adapter Drahtlosnetzwerkverbindung 5: Medienstatus. . . . . . . . . . . : Medium getrennt Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter # 3 Physikalische Adresse . . . . . . : 80-1F-02-61-C0-A6 DHCP aktiviert. . . . . . . . . . : Ja Autokonfiguration aktiviert . . . : Ja Drahtlos-LAN-Adapter Drahtlosnetzwerkverbindung 4: Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : Edimax 802.11n Wireless Adapter Physikalische Adresse . . . . . . : 80-1F-02-61-C0-A6 DHCP aktiviert. . . . . . . . . . : Ja Autokonfiguration aktiviert . . . : Ja Verbindungslokale IPv6-Adresse . : fe80::38d2:f489:726d:1fb5%17(Bevorzugt) IPv4-Adresse . . . . . . . . . . : 192.168.1.41(Bevorzugt) Subnetzmaske . . . . . . . . . . : 255.255.255.0 Lease erhalten. . . . . . . . . . : Donnerstag, 15. November 2012 10:51:05 Lease läuft ab. . . . . . . . . . : Sonntag, 18. November 2012 10:51:18 Standardgateway . . . . . . . . . : 192.168.1.1 DHCP-Server . . . . . . . . . . . : 192.168.1.1 DHCPv6-IAID . . . . . . . . . . . : 578821890 DHCPv6-Client-DUID. . . . . . . . : 00-01-00-01-17-FF-D5-FE-BC-5F-F4-48-FC-4B DNS-Server . . . . . . . . . . . : 91.233.182.2 194.230.1.39 NetBIOS über TCP/IP . . . . . . . : Aktiviert Tunneladapter isatap.{263BEB98-344B-435C-888F-1B15B97C3AC1}: Medienstatus. . . . . . . . . . . : Medium getrennt Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : Microsoft-ISATAP-Adapter Physikalische Adresse . . . . . . : 00-00-00-00-00-00-00-E0 DHCP aktiviert. . . . . . . . . . : Nein Autokonfiguration aktiviert . . . : Ja Tunneladapter Teredo Tunneling Pseudo-Interface: Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physikalische Adresse . . . . . . : 00-00-00-00-00-00-00-E0 DHCP aktiviert. . . . . . . . . . : Nein Autokonfiguration aktiviert . . . : Ja IPv6-Adresse. . . . . . . . . . . : 2001:0:9d38:6ab8:209c:2944:3f57:fed6(Bevo rzugt) Verbindungslokale IPv6-Adresse . : fe80::209c:2944:3f57:fed6%11(Bevorzugt) Standardgateway . . . . . . . . . : :: NetBIOS über TCP/IP . . . . . . . : Deaktiviert C:\Users\xyz>ping 192.168.1.1 Ping wird ausgeführt für 192.168.1.1 mit 32 Bytes Daten: Antwort von 192.168.1.1: Bytes=32 Zeit=2ms TTL=254 Antwort von 192.168.1.1: Bytes=32 Zeit=2ms TTL=254 Antwort von 192.168.1.1: Bytes=32 Zeit=2ms TTL=254 Antwort von 192.168.1.1: Bytes=32 Zeit=2ms TTL=254 Ping-Statistik für 192.168.1.1: Pakete: Gesendet = 4, Empfangen = 4, Verloren = 0 (0% Verlust), Ca. Zeitangaben in Millisek.: Minimum = 2ms, Maximum = 2ms, Mittelwert = 2ms

  Read the article

• routing problems

  - by user174050

  I have an windows 7 laptop and I have installed openvpn 2.2x as client. The laptop has 2 ethernet cards, one of them is wireless. The wireless lan is 192.168.1.0/24 The Fix lan is 192.168.2.0/24 If I connect to the openvpn server useing the Fix lan the I can connect properly and for testing I ping to my openvpn server 10.0.0.1 that answers correctly. But if I connect to the openvpn server useing the wireless lan, I can establish the connection but pinging to the server isn´t possible. The packets goes allways lost. Why can this happen? In an other laptop where windows xp is installed and with the same lan configuratio everything works propperly. In both cases the firewall is configured to access the vnc server and the server directories useing samba. With the XP I have no problems. I will thank you for all help Ignacio

  Read the article

• Random timeout now and then

  - by KenavR

  Maybe this is a to generic question, but since we have this issue for quite a while now, I give it a shot. We have some applications which use HTTP for the connection between the client (website or fat-client) and the server. The Computer who runs this applications is in a Network behind a firewall and a proxy, the server isn't inside the same network. The problem is that every now and then the https Request times out and depending on the Client the Application "hangs" or does some other funky stuff. The problem is definitely inside our network, because if i try the applications outside our network it works fine. Can you give me a hint where i can most likely find the problem?

  Read the article

• Do TCP connections work differently within the same subnet?

  - by Dean

  I've encountered some network behaviour that confuses me while trying to get Java RMI working. I use netcat to connect to a local machine: [my_machine]$ nc -w 1 192.168.0.100 60000 && echo success success I try to do the same to my server: [my_machine]$ nc -w 1 my-servers-ip 60000 && echo success This doesn't work, unless I explicitly listen on the server socket: [amazon_ec2]$ nc -l 60000 [my_machine]$ nc -w 1 my-servers-ip 60000 && echo success success For the version that fails, the SYN packet receives a RST, ACK in response. I'm not too knowledgable about this stuff, at this point I only have wild theories such as the one in the question. Any ideas? Potentially useful details: Local Machine (192.168.0.100) - Macbook Remote Machine (Amazon EC2) - Amazon Linux AMI 2012.03 Security Group Settings: 22 (SSH) 0.0.0.0/0 1099 0.0.0.0/0 49152-65535 0.0.0.0/0 "iptables -L" shows no rules set

  Read the article

• I need to build a mini computer lab with 6 PCs

  - by chiurox

  Hello everyone, This weekend I need to build a mini computer lab with 5-6 PCs. The purpose is for a small computer class that will be taking place. They're mostly going to be doing office and daily kind of stuff, so nothing high performance. However, I hope it will last at least for 2 more years. I already have some parts for 2 PCs, one is a P4 3.0 and another is Celeron 2.4GHz, both socket 478. For the other 4 PCs, I'm wondering if I should buy individual parts and put it all together or get workstations like those Dell Optiplex with P4s. To put things into perspective, I am not currently in the US. I'm in South America and prices here are ridiculously. Another really important thing is that I need to share an internet connection between a total of 8 PCs at this place. Right now I only have a crappy wireless router, should I get another one? Or go with switch hub? I'm not experienced in this matter. Thanks guys!

  Read the article

• How to share internet over network

  - by abc

  i have a machine connected to internet, i want to set up proxy server or any other configuration that can help me to share internet over other machines in the same network machine may be of diff. platform (linux,mac, , windows), and server can be (either linux or windows) so how to configure now.. all machine are in network. Thanks

  Read the article

• How to make XAMPP virtual hosts accessible to VM's and other computers on LAN?

  - by martin's

  XAMPP running on Vista 64 Ultimate dev machine (don't think it matters). Machine / Browser configuration Safari, Firefox, Chrome and IE9 on dev machine IE7 and IE8 on separate XP Pro VM's (VMWare on dev machine) IE10 and Chrome on Windows 8 VM (VMware on dev machine) Safari, Firefox and Chrome running on a iMac (same network as dev) Safari, Firefox and Chrome running on a couple of Mac Pro's (same network as dev) IE7, IE8, IE9 running on other PC's on the same network as dev machine Development Configuration Multiple virtual hosts for different projects .local fake TLD for development No firewall restrictions on dev machine for Apache Some sites have .htaccess mapping www to non-www Port 80 is open in the dev machine's firewall Problem XAMPP local home page (http://192.168.1.98/xampp/) can be accessed from everywhere, real or virtual, by IP All .local sites can be accessed from the browsers on the dev machine. All .local sites can be accessed form the browsers in the XP VM's. Some .local sites cannot be accessed from IE10 or Chrome on the W8 VM Sites that cannot be accessed from W8 VM have a minimal .htaccess file No .local sites can be accessed from ANY machine (PC or Mac) on the LAN hosts on dev machine (relevant excerpt) 127.0.0.1 site1.local 127.0.0.1 site2.local 127.0.0.1 site3.local 127.0.0.1 site4.local 127.0.0.1 site5.local 127.0.0.1 site6.local 127.0.0.1 site7.local 127.0.0.1 site8.local 127.0.0.1 site9.local 192.168.1.98 site1.local 192.168.1.98 site2.local 192.168.1.98 site3.local 192.168.1.98 site4.local 192.168.1.98 site5.local 192.168.1.98 site6.local 192.168.1.98 site7.local 192.168.1.98 site8.local 192.168.1.98 site9.local httpd-vhosts.conf on dev machine (relevant excerpt) NameVirtualHost *:80 <VirtualHost *:80> ServerName localhost ServerAlias localhost *.localhost.* DocumentRoot D:/xampp/htdocs </VirtualHost> # ======================================== site1.local <VirtualHost *:80> ServerName site1.local ServerAlias site1.local *.site1.local DocumentRoot D:/xampp-sites/site1/public_html ErrorLog D:/xampp-sites/site1/logs/access.log CustomLog D:/xampp-sites/site1/logs/error.log combined <Directory D:/xampp-sites/site1> Options Indexes FollowSymLinks AllowOverride All Require all granted </Directory> </VirtualHost> NOTE: The above <VirtualHost *:80> block is repeated for each of the nine virtual hosts in the file, no sense in posting it here. hosts on all VM's and physical machines on the network (relevant excerpt) 127.0.0.1 localhost ::1 localhost 192.168.1.98 site1.local 192.168.1.98 site2.local 192.168.1.98 site3.local 192.168.1.98 site4.local 192.168.1.98 site5.local 192.168.1.98 site6.local 192.168.1.98 site7.local 192.168.1.98 site8.local 192.168.1.98 site9.local None of the VM's have any firewall blocks on http traffic. They can reach any site on the real Internet. The same is true of the real machines on the network. The biggest puzzle perhaps is that the W8 VM actually DOES reach some of the virtual hosts. It does NOT reach site2, site6 and site 9, all of which have this minimal .htaccess file. .htaccess file <IfModule mod_rewrite.c> RewriteEngine On RewriteCond %{HTTP_HOST} !^www\. RewriteRule ^(.*)$ http://www.%{HTTP_HOST}/$1 [R=301,L] </IfModule> Adding this file to any of the virtual hosts that do work on the W8 VM will break the site (only for W8 VM, not the XP VM's) and require a cache flush on the W8 VM before it will see the site again after deleting the file. Regardless of whether a .htaccess file exists or not, no machine on the same LAN can access anything other than the XAMPP home page via IP. Even with hosts files on all machines. I can ping any virtual host from any machine on the network and get a response from the correct IP address. I can't see anything in out Netgear router that might prevent one machine from reaching the other. Besides, once the local hosts file resolves to an ip address that's all that goes out onto the local network. I've gone through an extensive number of posts on both SO and as the result of Google searches. I can't say that I have found anything definitive anywhere.

  Read the article

• Wireless Disconnects Randomly, then won't reconnect

  - by Nironan12

  Okay, so I have a Gateway laptop, with Windows Vista SP2, and a Linksys-Cisco WRT54GL Wireless-G Broadband Router. When I boot up my laptop, it automatically connects itself to my home network. Then at random times, it disconnects itself from said network. I go to reconnect it, but I get an unknown error and none of Vista's suggestions are working. Sometimes, after 5-10 minutes, it will reconnect itself. I've already tried updating the firmware. I can't install any other firmware, or make a factory reset. My dad owns the router and buys the internet and he won't let me TOUCH it. I can't do ANYTHING to it.

  Read the article

• Can i connect my modem's ethernet and usb slot to two computers simultaneously??

  - by Rajasekar

  I have NETGEAR BROADBAND MODEM. I had a desktop and laptop. I had connected internet to dekstop by using Ehternet slot on my modem to my ethernet slot on my Desktop. I need internet connection on my Laptop too. There is another slot in modem which can be connect using USB cable. Whether i can connect the laptop with that USB slot in my modem and use both the computer's internet? whether it will work??

  Read the article

• What would cause a single working website to not work on 1 out of 5 devices on a network?

  - by th3dude

  There is a specific website that loads up without problem on all machines on my network (both wired and wireless) except one laptop. This laptop is a Windows 7 machine that was just recovered using the recovery partition, so it is fresh. The site will not load in Firefox 3.6 or IE 8. The website is http://www.weightwacthers.com The site loads fine on my desktop, iPhone, and Droid, but not the laptop. In all my years in this business I've honestly never seen this happen. Also, 'Is it down for me or everyone' reports that it is indeed only me. What would cause this to happen?

  Read the article

• How to uploads to the web work on local networks

  - by Saif Bechan

  Let's say I have two computers hooked up as a home network. They both use the same router, and the router is hooked up to the to the net. Now lets say I am working on computer A, and I can access files on computer B. Computer A has a drive that is mounted on computer A as a network drive. Now I want to upload a file to a website. In the browser of computer A I open a browser, and go the website. On the website I select 'upload file', now in the file browser I go to the network drive, and select a file on computer B to upload. What happens in this case. Is the file uploaded directly from computer B to the website, or is the file first transferred to computer A, and then to the website.

  Read the article

• Two domains accessing same folder

  - by Liam Quinn

  I've just taken a new role in a school and am still familiarizing myself with their network, how ever I have recently been given a task and I'm having a little trouble finding out the fundementals of it. I have an admin network/domain 10.49.x.x and a classroom network/domian 192.168.1.x both connect to a Proxy server 10.49.202.231/192.168.1.51. Each domain has it's own shared folders as you'd expect, files and software installs etc, how ever there is a folder "staff" on the classroom network that all the teachers on the classroom network can access. The users on the admin network would like to access this same folder. How do I go about making this happen?

  Read the article

• "SIOCSIFADDR: No such device" after restoring backup

  - by Paul Tomblin

  I bought some new hardware, and tried to restore my backup on it. When I boot, I don't get a network connection. If I type "ifup eth0" on the command line, I see the messages: SIOCSIFADDR: No such device eth0: No such device lspci shows an ethernet controller (Intel 82546GB). ifconfig does not show any controller except loopback. I tried installing bare Debian on the machine and the network worked then, but now I want to make it like my old machine was. Googling this problem only seems to find people having this problem in VMs. I'm not in a VM.

  Read the article

• Cant get squid proxy to work

  - by danielgratz

  i need squid proxy on my centos server. But i just can't get it to work. I did yum install squid. Here is my squid.conf file (i removed all comments): acl all src 0.0.0.0/0.0.0.0 acl manager proto cache_object acl localhost src 127.0.0.1/255.255.255.255 acl to_localhost dst 127.0.0.0/8 acl SSL_ports port 443 acl Safe_ports port 80 acl Safe_ports port 21 acl Safe_ports port 443 acl Safe_ports port 70 acl Safe_ports port 210 acl Safe_ports port 1025-65535 acl Safe_ports port 280 acl Safe_ports port 488 acl Safe_ports port 591 acl Safe_ports port 777 acl CONNECT method CONNECT acl our_networks src 192.168.1.0/24 192.168.2.0/24 http_access allow our_networks http_access allow manager localhost http_access deny manager http_access deny !Safe_ports http_access deny CONNECT !SSL_ports http_access allow localhost http_access deny all icp_access allow all http_port 3128 hierarchy_stoplist cgi-bin ? access_log /var/log/squid/access.log squid acl QUERY urlpath_regex cgi-bin \? cache deny QUERY refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern . 0 20% 4320 acl apache rep_header Server ^Apache broken_vary_encoding allow apache coredump_dir /var/spool/squid Then i just put my server's public ip and port 3128 into my web browsers proxy settings... but it isn't working i can't visit any website. Please help. Thanks.

  Read the article

• Access Configuration Page of Modem (in bridge mode) through router

  - by Ujjwal Singh

  Given the Network Configuration: Internet (121.243.x.y/27) | (121.243.x.z) Static : Public Global IP Modem Bridge Mode | WiMAX (192.168.1.1/24) +169.254.1.1/24 : Modem Configuration Page | (192.168.1.2) Router DLink DIR 615 | Ethernet + WiFi (192.168.0.1/24) | Local network (192.168.0.2) Workstation Ethernet | no WiFi Is there any way, maybe using Routing Tables, to access the Modem configuration page at 169.254.1.1 from my local network, using a Windows 7 PC? Note that the modem is currently able to display its configuration page at 169.254.1.1, i.e. even while it is in bridge mode.

  Read the article

• Routing traffic to a specific NIC in Windows

  - by Stoicpoet

  I added a 10GB NIC to a SQL server which is connected over to a backend storage using ISCSI. I would like to force traffic going to a certain IP address/host to use the 10gb NIC, while all other traffic should continue to use the 1GB NIC. The 10gb nic is configured using a private network. So far I have added a entry in the host file to the host I want to go over the private network and when I ping the host, it does return the private IP, but I'm still finding traffic going to the 1gb pipe. How can I force all traffic to this host to use the 10gb interface? Would the best approach be a static route? 160.205.2.3 is the IP to the 1gb host, I actually want to the traffic to route over an interface assigned 172.31.3.2, which is also defined as Interface 22. That said, would this work? route add 160.205.2.3 mask 255.255.255.255 172.31.3.2 if 22

  Read the article

• Why is a network ID not needed to connect to an IP address?

  - by baddogai

  I know how IP basically works, and knows that an IP address composed of a network ID portion and a host ID portion, but when I type a IP address, say 8.8.8.8 into the web browser, I didn't supply any subnet mask information. So, how does the browser know where the dividing line is between the network ID and host ID? Since 8.8.8.8 may mean 8.8.8.8/8, 8.8.8.8/24 etc. In a nutshell, the IP address I supplied is ambiguous.

  Read the article

• How to use a D-Link usb network adapter on debian

  - by Barranka

  I have a Debian (squeeze) desktop, and I need to use a D-Link 150 USB Wireless Network Adapter. So far I've done this: $ lsusb ... Bus 001 Device 006: ID 2001:3c18 D-Link Corp. ... After looking for a solution in google, I found that I needed to install the following package: firmware-ralink_0.28+squeeze1_all.deb I've installed it, but Debian doesn't want to find the adapter. When I run lsmod, I can't find what I'm supposed to find: rt2870sta Can you point me in the right direction?

  Read the article

• Tomcat and HTTPS connect timeout (local Proxy resolves it)

  - by smas

  I have web application on the Tomcat with webservices. I've noticed that all web services connected to https get timeout. I run this app on my localhost in my company. When I redirect all my connections through Fiddler (local proxy) everything works correctly. I don't want to execute fiddler all the time. my computer -> [FIDDLER local proxy] -> [remote proxy] // WORKS my computer -> [remote proxy] // timeout How to increase tomcat logging to get more technical logs than only "timeout". Is there any other way to get more information what blocks the https URL?

  Read the article

• An device with an unknown MAC address is connected to my router

  - by Yar

  There is a computer that is not mine that is accessible on my network. I can even access its filesystem via AFP. What I want to know is how the computer could get on my network. My network is secured like this: Does that mean that they've used password cracking tools? The pass is not easy to guess but not hard to figure out via brute-force hacking, I guess. If I am being hacked, should I switch to WPA?

  Read the article

• get all ip address from subnet mask

  - by Guntis

  I have this IP list shown below. How i can calculate all ip addresses from that in Linux? Is there some tools that can calculate that for me ? I need that to check if i have not banned some cloudflare IP's. As firewall i am using shorewall and i am banning with fail2ban single IP. As i know, then i cannot detect subent mask from IP adress, right? 204.93.240.0/24 204.93.177.0/24 199.27.128.0/21 173.245.48.0/20 103.22.200.0/22 141.101.64.0/18 108.162.192.0/18 190.93.240.0/20 188.114.96.0/20

  Read the article

• Cisco VoIP stuck as Unregistered?

  - by Shifty

  Question: Why is one VoIP stuck as Unregistered? Background: We have a Cisco UC540 Small Business switch/router/voip combo. This phone was working until I powered everything down to install a larger UPS unit. The phone originally had a status of "Deceased". I removed the registration and tried to add it again. Now it just sits as "Unregistered". I even tried giving it another extension. I am stuck using the Cisco Communication Assistant since this is small business hardware. There is very limited CLI access. Also, from what I heard, if you access the CLI with out cisco permission, you will void any warranty. The phone in question is a Cisco SPA501G. It is connected to a SG300-28P. There are 5 other phones on this switch working just fine. I have tried other ports with no luck. Both the link and PoE lights are lit up. Any ideas?

  Read the article

< Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >