Search Results

Search found 18845 results on 754 pages for 'wayback machine'.

Page 196/754 | < Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >

• Setting a Static IP Running FreeBSD8 in VirtualBox hosted on Windows 7

  - by gvkv

  I'm using VirtualBox on Windows 7 (host) to run a FreeBSD (guest) based web server. I`ve assigned a static ip of 192.168.80. 1 to the (virtualized) NIC which is run in bridged mode. The problem is that when I ping an external server (such as google.com) I get a No route to host error: dimetro# ping google.com PING google.com (66.249.90.104): 56 data bytes ping: sendto: No route to host ... I can ping the BSD server from both another virtualized machine and my host machine and from the server, I can ping everything on the network. The router ip is 192.168.1.1/16. ADDENDUM: I have the following lines in /etc/rc.conf on the BSD VM to configure networking: defaultrouter="192.168.1.1" ifconfig_em0="inet 192.168.80.1 netmask 255.255.0.0"

  Read the article

• Using 32-bit drivers on a 64-bit operating system

  - by doug

  Can I use the 32 bits version of my drivers on a Windows 7 x64 machine?

  Read the article

• printing foreign text for PHP on UBUNTU and CENTOS

  - by hao

  Hey guys, I am using domdocuments and using things like $div-nodeValue to obtain certain info from a web page. On my ubuntu machine when i do php crawl.php everything is displayed properly in Chinese (the page is in UTF-8). However on my CENTOS machine using the same code I get æ´å¤åå¸ when I print in the terminal. and when I save it to the database, the characters are also messed up. One thing I noticed is that when I do print $content, both systems display them properly.

  Read the article

• How to copy directories using debugfs?

  - by tjbp

  The debugfs manpage gives the impression that the command 'rdump . .' will recursively copy all files found on the specified filesystem from the debugfs cwd to the native filesystem's cwd. Instead I seem to receive a syntax error, and no copy is initiated? These are the commands I run: cd /path/to/transfer/destination debugfs /dev/sda1 -R rdump . . My task is to copy the entire contents of a clean yet unmountable USB storage device to its host machine's HD. The host machine does not support the inode size used by the USB device's filesystem (256) and its software is not upgradeable, so my intention was to use debugfs to transfer the files. If anyone has any other suggestions for this task I'd be grateful.

  Read the article

• Reset Network Load Balancer Connection Pool

  - by bill_the_loser

  I am currently working on load testing a web application on a virtual machine cluster. I am looking for a way to flush the connection pool / NLB cache so that it is like each machine connecting to the NLB is connecting for the first time and doesn't get directed back to the node that it was on last time. This a Windows 2003 Server cluster, behind a Microsoft software based Network Load Balancer. Additional Information: To do the load testing I'm using virtual machines, one for each node on the cluster. Somehow I got two virtual machines connecting to the same node and I'm looking for an easier way to reset those connections without going in to the NLB Manager and stopping and starting each node on the NLB. Update: We went ahead and changed the affinity on all of the nodes of the cluster to none. Now it's a non-issue.

  Read the article

• Sync Windows Live Mail between two computers

  - by Jesper

  Hi, I have a laptop where I have been using Windows Live Mail as my email application for the last year. Yesterday I got a dell desktop as well and I am desperatly trying to set up so my desktop and laptop sync the email between each other. Im using Super Flexible Synchronizer to sync the email storage folder to a NAS on my network, so when setting up the desktop naturally I set it up to download all from the NAS. But each time I open Windows Live Mail on the new machine, some emails suddenly come in duplicates, one is read, the other is not. I have ran through the registry on the new machine and updated an ID i found, in 3 places, one being: C:\Users\\AppData\Local\Microsoft\Windows Live Contacts{blah blah blah}\DBStore\contacts.edb Still doesnt seem to be enough. Does anyone have any tips or ideas how to sync Windows Live Mail between two computers without duplicates and weird behaviour etc. grateful for your help, jesper

  Read the article

• Website requests not reaching IIS?

  - by pete the pagan-gerbil

  To start off with a confession, I am not a server admin - just a developer tasked with getting to the root of a problem. Please be gentle! I have an intranet ASP.NET website running in IIS on a virtual machine. The website is not accessed very often (the last IIS log file was modified nearly six months ago). Both the IP address and Host header value are now failing to return the website, and the IIS log still doesn't show any more recent activity. The virtual machine was moved to a different physical location a few months ago, and the IP address for it has changed. Could this be what has broken access to the site? What else should I be checking to solve this? I don't have totally unrestricted access to the building's network settings, structures, etc. I would be grateful for any advice, even if I can't use it myself it'll improve my knowledge of what's going on behind the scenes!

  Read the article

• Allowing Remote Connection in IIS on Windows 7

  - by GiddyUpHorsey

  I'm trying to give access to a website in IIS on my Win 7 machine to another person on my network. He's unable to access it. I was wondering if perhaps it was because IIS isn't configured to allow remote connections (I seem to remember having to do this sort of thing on Win XP). I've hunted around in IIS and googled but am not finding a way to configure remote connections on Win 7. Some of the answers I've found seem to refer to Win Server 2008 and talk about a management service in IIS Manager, but it doesn't appear to be present on my machine.

  Read the article

• deploying a Python application from a PHP developer

  - by user1218776

  I'm a little confused on the deployment process for Python. Let's say you create a brand new project with virtualenv source bin/activate pip install a few libraries write a simple hello world app pip freeze the dependencies When I deploy this code into a machine, do I need first make sure the machine is sourced before installing dependencies? I don't mean to sound like a total noob but in the PHP world, I don't have to worry about this because it's already part of the project. All the dependencies are registered with the autoloader in place. The steps would be: rsync the files (or any other method) source bin/activate pip install the dependencies from the pip freeze output file It feels awkward, or just wrong and very error prone. What are the correct steps to make? I've searched around but it seems many tutorials/articles make an assumption that anyone reading the article has past python experience (imo).

  Read the article

• What is the equivalent of 127.255.255.255 for OS/X machines so I can test broadcast udp packets without a network?

  - by JohnPristine

  I am trying to test my program that makes use of broadcast UDP (not multicast!). In Linux, I can use the 127.255.255.255:64651 address and everything works beautifully, in other words, I send a packet to 127.255.255.255:64651 and multiple clients listening on that port get the packet. A real broadcast example! Unfortunately on my OS/X machine (Mountain Lion) the same example does not work. Is there any way I can get 127.255.255.255 to work on mac machines? Any other solution to get broadcast working on my mac machine without a network? Note: It has to be broadcast, not multicast.

  Read the article

• Grub doesn't show both Ubuntu installations

  - by jackweirdy

  I have a laptop with Ubuntu 12.04 LTS installed as the main OS. The other day I installed Ubuntu-Studio (version 12.04) into another partition on the machine. The installation went great and when the machine booted, the grub menu popped up and I could see the option for Ubuntu Studio and the vanilla Ubuntu OS'. The problem was that this version of grub, installed by the Studio installer, didn't look great and insisted on putting Studio at the top of the list, and therefore as the main OS to boot. I use the standard Ubuntu more often, so I booted into that and ran sudo grub-install dev/sda. That worked OK and now Ubuntu boots as normal. Only problem is that the Grub menu doesn't show up and doesn't give me a chance to choose the other OS. Running sudo os-prober shows that it can find ubuntu studio, it doesn't give me a chance to boot it. Any ideas as to how I can fix this problem? Cheers in advance. EDIT: followed instructions here and saw the boot menu, but the only boot options present were for the standard installation of Ubuntu.

  Read the article

• Color Profiles in Windows 7 vs. XP

  - by flxkid

  I have a Brother Color Laser Printer and an HP 8150DN. I have a local Windows 7 Pro machine that I do graphics work on. I created a letterhead that when printed from my machine looks dark and rich on either the mono HP or the color Brother laser. I take this same letterhead, and move it onto our network for use by our users which are all on XP. Then they print the same file, it is washed out on either printer. I've confirmed that the printer settings we're using are identical. I've confirmed that its not related to the program or even specifically to the letterhead. I can duplicate this with other files too. I'm down to XP vs Windows 7 being the issue. I'm fairly certain now that color profiles are involved. I have no clue how to fix it though. Any suggestions would be much appreciated.

  Read the article

• Windows 7 User / Documents and Settings folders

  - by Kip

  Yo, I have a machine - Windows 7, nothing remarkable about the install but i have multiple drives in the machine. I have a c:\users\username folder which seems to be current and is the one that all windows properties point to. However, i also have a f:\documents and settings\username folder (which was hidden) which is also current and up to date. If i edit anything from either, they seem to "replicate" or update each other ie if i rename an icon on my desktop, it renames it in c:\users\username\desktop and f:\documents and settings\username\desktop. Likewise if i edit directly in one of those folders, it does the same to the other. Any one got any ideas what might cause this? Problem i have is that I need to remove the f drive all together! Thanks in advance

  Read the article

• aTop like tool for OSX

  - by Maciek Sawicki

  I'm trying to debug some issues with my Mac. This machine is used as continuous integration server. It stops responding from time to time. I think it could be some software issue, since the machine is working (so i.e. it's not a kernel panic) - that is when I go to the server room I see the login screen and I can move the mouse. Unfortunately I can't login neither directly nor by VNC or SSH. There is a nice tool that helps in debugging this type of problem called aTop. It's like top but with history. Unfortunately it's Linux-only software. Is there any tool that is similar to aTop for OSX?

  Read the article

• Advise on VMWare hardware requirements and host OS

  - by edwin.nathaniel

  Hi All, I'm a newbie developer wanting to learn a bit about Virtualization (from the IT point of view, not theoretical/academic). What I'd like to do: Prepare a machine Install VMWare or VirtualBox Prepare 3 Guest OSes (one for Win2k8 server, 2 for Ubuntu Server) Win2k8 will run SQL Server 2k8 and IIS (for ASP.NET MVC deployment) 1 Ubuntu Server for Drupal, SugarCRM, MediaWiki, typical LAMP stuff 1 Ubuntu Server for Java (Tomcat/Jetty + MySQL/PostgreSQL) What I'd like to know: What would be the ideal Host OS such that the Host OS should not spend too many resources on itself but should boost these instances of VMs (e.g: does Win2k8 performs better vs Linux?) What would be the ideal machine for this (preferably AMD base chip) I'm not expecting the best performance out of this setup, just a decent one to host one drupal instance, one ASP.NET MVC (future, not now), and one Tomcat/Jetty instance. NB: If you have a better suggestions on the setup, feel free to let me know (e.g: maybe Drupal and Tomcat can be in one instance but move the database to another instance instead of 1 instance map to 1 webserver and 1 dbserver). Thank you.

  Read the article

• My Intel Core i3 frequently shuts down due to "Processor Thermal Trip error"

  - by explorest

  My Desktop PC running Windows 7 on Intel Core i3 dual processor machine started shutting down during the boot process a couple of days ago. I left it alone for about 48 hours and tried again. The boot process informed me about Processor Thermal Trip as being the cause of boot failures and suggested a Windows recovery process. I went through the recovery process which completed without problems. The PC booted normally and Windows 7 worked as expected but after 10 minutes it again tripped and now whenever I start it, it shuts down during the boot process. What should I do next?... is there a boot menu / setup settings that needs to be adjusted to avoid it... Or is there a hardware problem (which seems unlikely as the machine occasionally boots perfectly )?

  Read the article

• Run a batch file silently, executed at remote desktop login

  - by ILMV

  In our office we are using Linux thin client machines, they work very well except the lack of IE, which is a pain because the corporations we deal with are too stupid to update their web apps (no flame wars please). To solve this problem we have machine in our computer room which users remote desktop into to access internet explorer, this is achieved by running a batch script which opens IE and when it closes logs them off, this setup works well for us. Even though I have @echo off and the cmd window isn't displaying anything, I would really like that batch file to be executed silently, so the cmd window doesn't appear at all. Is this possible? The Ubuntu terminal server client has an option to launch a file / app at login, is there a command I can use to run this batch silently. I have tried these: C:\my_batch.bat /NOCONSOLE C:\my_batch.bat /NOWINDOW C:\my_batch.bat /B C:\my_batch.bat /Q ...with no success, perhaps it's the way I am doing it? Cheers :-) Edit The remote desktop platform is a Windows XP machine, nothing entirely special but not a Windows Server setup.

  Read the article

• Vim and mouse with ssh from Mac to Linux

  - by Jonatan Littke

  Hey. I certainly know it's possible to make the mouse work in Vim on a remote session to a Linux machine from my Mac, but I haven't figured out just how. Daily vim gives a tip on making it work but if I try to set 'mac-ansi', for example, I get an error saying I can only specify values beginning with builtin_ (riscos, beos-ansi, etc). I've tried using ssh -X, combined with set mouse=a and set term=builtin_anso for example, but with no success with or without combining them. I'm using Snow Leopard and attempting to use the mouse on a Debian machine with vim 7.1.314. I've had a look at the documentation but can't make it work. Any tips?

  Read the article

• Cannot ping ubuntu server by hostname - can only ping by IP

  - by Tone

  I have an unbuntu 9.10 server and have set the hostname to "fileserver" When I try to ping fileserver from a client machine it doesn't find it, however I can ping by the IP my router assigns it. I have tried changing the ip in /etc/hosts from this: 127.0.0.1 fileserver to this: 192.168.1.109 fileserver which is the ip being assigned. I had a previous install of this server and i had no issues with this - only difference in this install is i did not select any of the options such as LAMP, OpenSSH, etc during the install process. I can access the machine fine by ip using PuTTY. Any ideas?

  Read the article

• Graphics card failure, anything I could try...

  - by ILMV

  My gaming PC has decided to die, it's not the first time but usually a quick ATX reset brings it back to life. Today it didn't. I disconnect all unessasary devices so I've only got the case button / LED cables, GPU, CPU, RAM and power connected, the computer still didn't turn on. I've not got a speaker on my motherboard so found a spare one I have for testing and when the machine starts up I get one long beep and two short beeps from my Award BIOS, which apparently means a video card error. I change it with the GPU from another machine and all works well. Q: So I have a faulty graphics card (an nVidia 8800GT OC), is there anything I can try to resurect it?

  Read the article

• How to make Linux reliably boot on multi-cpu machines?

  - by Adam Tabi

  I've got two machines, one with 4x12 AMD Opteron cores (AMD Opteron(tm) Processor 6176), one with 2x8 Xeon cores (HT disabled; Intel(R) Xeon(R) CPU E5-2660 0 @ 2.20GHz). On both machines I experience difficulties during boot of Linux using recent kernels. The system hangs during the initialization of the kernel, before or just when initramfs started initializing the hardware. The last thing which got displayed was a stacktrace like this: CPU: 31 PID: 0 Comm: swapper/31 Tainted: G D 3.11.6-hardened #11 Hardware name: Supermicro X9DRT-HF+/X9DRT-HF+, BIOS 3.00 07/08/2013 task: ffff880854695500 ti: ffff880854695a28 task.ti: ffff880854695a28 RIP: 0010:[<ffffffff8100a82e>] [<ffffffff8100a82e>] default_idle+0x6/0xe RSP: 0000:ffff8808546b3ec8 EFLAGS: 00000286 RAX: ffffffff8100a828 RBX: ffff880854695a28 RCX: 00000000ffffffff RDX: 0100000000000000 RSI: 0000000000000000 RDI: ffff88107fdec690 RBP: ffff8808546b3ec8 R08: 0000000000000000 R09: ffff880854695500 R10: ffff880854695500 R11: 0000000000000001 R12: ffff880854695a28 R13: ffff880854695a28 R14: ffff880854695a28 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88107fde0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000002b43256a960 CR3: 00000000016b5000 CR4: 00000000000607f0 Stack: ffff8808546b3ed8 ffffffff8100aec9 ffff8808546b3f10 ffffffff8109ce25 334ab55852ec7aef 000000000000001f ffffffff8102d6c0 0000000000000000 0000000000000000 ffff8808546b3f48 ffffffff810276e0 ffff8808546b3f28 Call Trace: [<ffffffff8100aec9>] arch_cpu_idle+0x20/0x2b [<ffffffff8109ce25>] cpu_startup_entry+0xed/0x138 [<ffffffff8102d6c0>] ? flat_init_apic_ldr+0x80/0x80 [<ffffffff810276e0>] start_secondary+0x2c9/0x2f8 I compiled the kernel myself and it works fine, if I boot with nolapic. Yet, only one core is used. Also, the kernel of RHEL6 seems to work fine. I suspect that there are some patches used to make things work. Using the kernel config file from RHEL6 and building a more recent kernel yields the same problems. On the Xeon machine, things got better by disabling Hyperthreading completely. The machine now boots successfully on at least 4 out of 5 times. And if it boots, multicore stuff works just fine. However, I'm wondering about what to do about the AMD machine. So to sum it up: Gentoo kernel 3.6 - 3.11 won't reliably boot those machines unless you reduce the amount of cores (e.g. via nolapic). RHEL6 kernel (which is 2.6.32) boots just fine. RH kernel config used to build a 3.x kernel won't yield a working kernel. Not distribution specific (apart from the kernel being used). These stack traces got printed every minute or so. The kernel seems to be stuck in an endless loop. Yet, a recent kernel is needed for various reasons. So the question is: What does the RHEL6 kernel do, what vanilla or gentoo kernels don't do? Is there a boot option that might lead to a reliable boot with all the cores enabled? Best, Adam

  Read the article

• Monitor HTTP usage on network from Linux free

  - by David

  I manage a small office network. I am looking to start monitoring/logging internet usage (website requests) for each user on a small network. All the windows clients are running through a switch to a BT router. I also have a linux (centos) machine which is connected as a client to the BT router as well. Is there any free software I can install on the linux box (or my own machine) to allow me to log and monitor websites requested by users kind of like browser history. Ideally, something that would collect each client's browser history in 1 place. Thanks

  Read the article

• Keep your Root Authorities up to date

  - by John Breakwell

  Originally posted on: http://geekswithblogs.net/Plumbersmate/archive/2013/06/20/keep-your-root-authorities-up-to-date.aspxBy default, Windows will automatically update it’s internal list of trusted root authorities as long as the Update Root Certificates function is installed. This should be enabled by default and takes manual intervention to remove it. With this component enabled, the following happens: If you are presented with a certificate issued by an untrusted root authority, your computer will contact the Windows Update Web site to see if Microsoft has added the CA to its list of trusted authorities. If it has been added to the Microsoft list of trusted authorities, its certificate will automatically be added to your trusted certificate store. If the component is not installed and a certificate from an untrusted CA is encountered then the following text will be seen: This is an inconvenience for the person browsing the site as they need to click to continue. Applications, though, will be unable to proceed and will throw an exception. Example: ERROR_WINHTTP_SECURE_FAILURE 12175 (0x00002F8F) One or more errors were found in the Secure Sockets Layer (SSL) certificate sent by the server. If you look at the certificate’s properties, you can see the “Issued by:” value:   This must match a Trusted Root Certificate Authority in the current user’s certificate store.   So turn on automatic updating of trusted root authority certificates. For Windows Vista and above, this option is controlled through Group Policy. See the “To Turn Off the Update Root Certificates Feature by Using Group Policy” section of the following Technet article: Certificate Support and Resulting Internet Communication in Windows Vista If Windows Update is a blocked site then download and deploy the latest pack of root certificates from Microsoft: Update for Root Certificates For Windows XP [May 2013] (KB931125)   Failing that, find a machine that has the latest root certificates installed and export them from there: Open up the Certificates console. Right-click the required Trusted Root Certificate Authority certificate Choose Export from “All Tasks” to open up the Certificate Export Wizard Choose an export file format – DER should be fine Provide a file name and complete the export. Move the file to the machine that’s missing the certificate Right-click the file and choose “Install Certificate” to open up the Certificate Import Wizard Allow the wizard to automatically select the certificate store and complete the import On a side note, for troubleshooting certificate issues it can be helpful to clear the SSL state:

  Read the article

• Booting from a USB drive that was originally a boot drive

  - by daveh551

  When Win 7 went RTM, I upgraded my laptop from XP. But to protect myself against the possibility of having data inaccessible, I got a new disk and put it in the laptop, and took the old (XP) disk and put it in a USB enclosure. I have no trouble accessing the data on the USB drive under Windows 7. But I would like to be able to plug it in, tell the BIOS to boot from the USB drive, and be back on my old machine. The laptop is a Dell Precision M90, and it has a boot from USB option in its boot menu. But when I try to do that, it does read the drive, gets as far as putting up the Windows XP splash screen and starting the boot progress bar, and then reboots. What do I need to do to the old disk now running on USB to allow the machine to boot from it?

  Read the article

• gnu screen - mouse does not work in nested screen session

  - by Matthew

  I started a screen session inside another screen session, both on my local machine. This is using cygwin, but I don't think it matters. I have tried via ssh to a real unix machine but the behaviour is the same. Mouse works great in the first screen session, I'm able to open vim with :set mouse=a and I can click to move the cursor or switch tabs, and the mouse wheel scrolls. But in the nested session it does not work, mouse is only useful for selecting terminal text that gets put in the clipboard, but is not able to interact with vim. I want this to work because I usually work with a local screen session, then ssh to a remote server and have a remote screen session running too (hence the nesting) and I like to scroll swiftly in vim by using the mouse wheel. Can anyone tell me why the mouse works in the first layer of screen but not in the second, nested screen session, and how I can make it work? Thanks in advance, Matthew

  Read the article

< Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >