Search Results

Search found 5577 results on 224 pages for 'yash trojan 25'.

Page 196/224 | < Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >

  • Why does my MacBook Pro have long ping times over Wi-Fi?

    - by randynov
    I have been having problems connecting with my Wi-Fi. It is weird, the ping times to the router (<30 feet away) seem to surge, often getting over 10 seconds before slowly coming back down. You can see the trend below. I'm on a MacBook Pro and have done the normal stuff (reset the PRAM and SMC, changed wireless channels, etc.). It happens across different routers, so I think it must be my laptop, but I don't know what it could be. The RSSI value hovers around -57, but I've seen the transmit rate flip between 0, 48 and 54. The signal strength is ~60% with 9% noise. Currently, there are 17 other wireless networks in range, but only one in the same channel. 1 - How can I figure out what's going on? 2 - How can I correct the situation? PING 192.168.1.1 (192.168.1.1): 56 data bytes 64 bytes from 192.168.1.1: icmp_seq=0 ttl=254 time=781.107 ms 64 bytes from 192.168.1.1: icmp_seq=1 ttl=254 time=681.551 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=254 time=610.001 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=254 time=544.915 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=254 time=547.622 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=254 time=468.914 ms 64 bytes from 192.168.1.1: icmp_seq=6 ttl=254 time=237.368 ms 64 bytes from 192.168.1.1: icmp_seq=7 ttl=254 time=229.902 ms 64 bytes from 192.168.1.1: icmp_seq=8 ttl=254 time=11754.151 ms 64 bytes from 192.168.1.1: icmp_seq=9 ttl=254 time=10753.943 ms 64 bytes from 192.168.1.1: icmp_seq=10 ttl=254 time=9754.428 ms 64 bytes from 192.168.1.1: icmp_seq=11 ttl=254 time=8754.199 ms 64 bytes from 192.168.1.1: icmp_seq=12 ttl=254 time=7754.138 ms 64 bytes from 192.168.1.1: icmp_seq=13 ttl=254 time=6754.159 ms 64 bytes from 192.168.1.1: icmp_seq=14 ttl=254 time=5753.991 ms 64 bytes from 192.168.1.1: icmp_seq=15 ttl=254 time=4754.068 ms 64 bytes from 192.168.1.1: icmp_seq=16 ttl=254 time=3753.930 ms 64 bytes from 192.168.1.1: icmp_seq=17 ttl=254 time=2753.768 ms 64 bytes from 192.168.1.1: icmp_seq=18 ttl=254 time=1753.866 ms 64 bytes from 192.168.1.1: icmp_seq=19 ttl=254 time=753.592 ms 64 bytes from 192.168.1.1: icmp_seq=20 ttl=254 time=517.315 ms 64 bytes from 192.168.1.1: icmp_seq=37 ttl=254 time=1.315 ms 64 bytes from 192.168.1.1: icmp_seq=38 ttl=254 time=1.035 ms 64 bytes from 192.168.1.1: icmp_seq=39 ttl=254 time=4.597 ms 64 bytes from 192.168.1.1: icmp_seq=21 ttl=254 time=18010.681 ms 64 bytes from 192.168.1.1: icmp_seq=22 ttl=254 time=17010.449 ms 64 bytes from 192.168.1.1: icmp_seq=23 ttl=254 time=16010.430 ms 64 bytes from 192.168.1.1: icmp_seq=24 ttl=254 time=15010.540 ms 64 bytes from 192.168.1.1: icmp_seq=25 ttl=254 time=14010.450 ms 64 bytes from 192.168.1.1: icmp_seq=26 ttl=254 time=13010.175 ms 64 bytes from 192.168.1.1: icmp_seq=27 ttl=254 time=12010.282 ms 64 bytes from 192.168.1.1: icmp_seq=28 ttl=254 time=11010.265 ms 64 bytes from 192.168.1.1: icmp_seq=29 ttl=254 time=10010.285 ms 64 bytes from 192.168.1.1: icmp_seq=30 ttl=254 time=9010.235 ms 64 bytes from 192.168.1.1: icmp_seq=31 ttl=254 time=8010.399 ms 64 bytes from 192.168.1.1: icmp_seq=32 ttl=254 time=7010.144 ms 64 bytes from 192.168.1.1: icmp_seq=33 ttl=254 time=6010.113 ms 64 bytes from 192.168.1.1: icmp_seq=34 ttl=254 time=5010.025 ms 64 bytes from 192.168.1.1: icmp_seq=35 ttl=254 time=4009.966 ms 64 bytes from 192.168.1.1: icmp_seq=36 ttl=254 time=3009.825 ms 64 bytes from 192.168.1.1: icmp_seq=40 ttl=254 time=16000.676 ms 64 bytes from 192.168.1.1: icmp_seq=41 ttl=254 time=15000.477 ms 64 bytes from 192.168.1.1: icmp_seq=42 ttl=254 time=14000.388 ms 64 bytes from 192.168.1.1: icmp_seq=43 ttl=254 time=13000.549 ms 64 bytes from 192.168.1.1: icmp_seq=44 ttl=254 time=12000.469 ms 64 bytes from 192.168.1.1: icmp_seq=45 ttl=254 time=11000.332 ms 64 bytes from 192.168.1.1: icmp_seq=46 ttl=254 time=10000.339 ms 64 bytes from 192.168.1.1: icmp_seq=47 ttl=254 time=9000.338 ms 64 bytes from 192.168.1.1: icmp_seq=48 ttl=254 time=8000.198 ms 64 bytes from 192.168.1.1: icmp_seq=49 ttl=254 time=7000.388 ms 64 bytes from 192.168.1.1: icmp_seq=50 ttl=254 time=6000.217 ms 64 bytes from 192.168.1.1: icmp_seq=51 ttl=254 time=5000.084 ms 64 bytes from 192.168.1.1: icmp_seq=52 ttl=254 time=3999.920 ms 64 bytes from 192.168.1.1: icmp_seq=53 ttl=254 time=3000.010 ms 64 bytes from 192.168.1.1: icmp_seq=54 ttl=254 time=1999.832 ms 64 bytes from 192.168.1.1: icmp_seq=55 ttl=254 time=1000.072 ms 64 bytes from 192.168.1.1: icmp_seq=58 ttl=254 time=1.125 ms 64 bytes from 192.168.1.1: icmp_seq=59 ttl=254 time=1.070 ms 64 bytes from 192.168.1.1: icmp_seq=60 ttl=254 time=2.515 ms

    Read the article

  • migration from jboss4.0.5GA to jboss5.1.0 GA

    - by rahul c
    Hi, Currently we have migrated from jboss4.0.5GA to jboss5.1.0 GA.Our application runs under jboss4.0.5GA well.The reason for migration to enable web service. I cann't find a way to create a web service on jboss 4.0.5 GA. while running on jboss 5.1.0 GA with jbossws-cxf-3.2.1.GA installed on it. i got following error 18:53:43,699 INFO [STDOUT] 2009-11-30 18:53:43,699 INFO org.springframework.core.CollectionFactory - JDK 1.4+ collections available 18:53:43,700 INFO [STDOUT] 2009-11-30 18:53:43,700 INFO org.springframework.core.CollectionFactory - Commons Collections 3.x available 18:53:43,973 INFO [STDOUT] 2009-11-30 18:53:43,972 INFO org.springframework.beans.factory.xml.XmlBeanDefinitionReader - Loading XML bean definitions from ServletContext resource [/WEB-INF/applicationContext.xml] 18:53:44,308 INFO [STDOUT] 2009-11-30 18:53:44,302 ERROR org.springframework.web.context.ContextLoader - Context initialization failed org.springframework.beans.factory.BeanDefinitionStoreException: Unexpected exception parsing XML document from ServletContext resource [/WEB-INF/applicationContext.xml]; nested exception is java.lang.IllegalArgumentException: Class [org.apache.cxf.transport.http_jetty.spring.NamespaceHandler] does not implement the NamespaceHandler interface Caused by: java.lang.IllegalArgumentException: Class [org.apache.cxf.transport.http_jetty.spring.NamespaceHandler] does not implement the NamespaceHandler interface at org.springframework.beans.factory.xml.DefaultNamespaceHandlerResolver.initHandlerMappings(DefaultNamespaceHandlerResolver.java:119) at org.springframework.beans.factory.xml.DefaultNamespaceHandlerResolver.(DefaultNamespaceHandlerResolver.java:96) at org.springframework.beans.factory.xml.DefaultNamespaceHandlerResolver.(DefaultNamespaceHandlerResolver.java:82) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.createDefaultNamespaceHandlerResolver(XmlBeanDefinitionReader.java:526) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.createReaderContext(XmlBeanDefinitionReader.java:515) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.registerBeanDefinitions(XmlBeanDefinitionReader.java:495) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadBeanDefinitions(XmlBeanDefinitionReader.java:390) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBeanDefinitions(XmlBeanDefinitionReader.java:340) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBeanDefinitions(XmlBeanDefinitionReader.java:317) at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:125) at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:141) at org.springframework.web.context.support.XmlWebApplicationContext.loadBeanDefinitions(XmlWebApplicationContext.java:123) at org.springframework.web.context.support.XmlWebApplicationContext.loadBeanDefinitions(XmlWebApplicationContext.java:91) at org.springframework.context.support.AbstractRefreshableApplicationContext.refreshBeanFactory(AbstractRefreshableApplicationContext.java:94) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:292) at org.springframework.web.context.support.AbstractRefreshableWebApplicationContext.refresh(AbstractRefreshableWebApplicationContext.java:156) at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:246) at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:184) at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:49) at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:3910) at org.apache.catalina.core.StandardContext.start(StandardContext.java:4393) at org.jboss.web.tomcat.service.deployers.TomcatDeployment.performDeployInternal(TomcatDeployment.java:310) at org.jboss.web.tomcat.service.deployers.TomcatDeployment.performDeploy(TomcatDeployment.java:142) at org.jboss.web.deployers.AbstractWarDeployment.start(AbstractWarDeployment.java:461) at org.jboss.web.deployers.WebModule.startModule(WebModule.java:118) at org.jboss.web.deployers.WebModule.start(WebModule.java:97) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:157) at org.jboss.mx.server.Invocation.dispatch(Invocation.java:96) at org.jboss.mx.server.Invocation.invoke(Invocation.java:88) at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264) at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:668) at org.jboss.system.microcontainer.ServiceProxy.invoke(ServiceProxy.java:206) at $Proxy38.start(Unknown Source) at org.jboss.system.microcontainer.StartStopLifecycleAction.installAction(StartStopLifecycleAction.java:42) at org.jboss.system.microcontainer.StartStopLifecycleAction.installAction(StartStopLifecycleAction.java:37) at org.jboss.dependency.plugins.action.SimpleControllerContextAction.simpleInstallAction(SimpleControllerContextAction.java:62) at org.jboss.dependency.plugins.action.AccessControllerContextAction.install(AccessControllerContextAction.java:71) at org.jboss.dependency.plugins.AbstractControllerContextActions.install(AbstractControllerContextActions.java:51) at org.jboss.dependency.plugins.AbstractControllerContext.install(AbstractControllerContext.java:348) at org.jboss.system.microcontainer.ServiceControllerContext.install(ServiceControllerContext.java:286) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:1631) at org.jboss.dependency.plugins.AbstractController.incrementState(AbstractController.java:934) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1082) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:984) at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:822) at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:553) at org.jboss.system.ServiceController.doChange(ServiceController.java:688) at org.jboss.system.ServiceController.start(ServiceController.java:460) at org.jboss.system.deployers.ServiceDeployer.start(ServiceDeployer.java:163) at org.jboss.system.deployers.ServiceDeployer.deploy(ServiceDeployer.java:99) at org.jboss.system.deployers.ServiceDeployer.deploy(ServiceDeployer.java:46) at org.jboss.deployers.spi.deployer.helpers.AbstractSimpleRealDeployer.internalDeploy(AbstractSimpleRealDeployer.java:62) at org.jboss.deployers.spi.deployer.helpers.AbstractRealDeployer.deploy(AbstractRealDeployer.java:50) at org.jboss.deployers.plugins.deployers.DeployerWrapper.deploy(DeployerWrapper.java:171) at org.jboss.deployers.plugins.deployers.DeployersImpl.doDeploy(DeployersImpl.java:1439) at org.jboss.deployers.plugins.deployers.DeployersImpl.doInstallParentFirst(DeployersImpl.java:1157) at org.jboss.deployers.plugins.deployers.DeployersImpl.doInstallParentFirst(DeployersImpl.java:1178) at org.jboss.deployers.plugins.deployers.DeployersImpl.install(DeployersImpl.java:1098) at org.jboss.dependency.plugins.AbstractControllerContext.install(AbstractControllerContext.java:348) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:1631) at org.jboss.dependency.plugins.AbstractController.incrementState(AbstractController.java:934) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1082) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:984) at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:822) at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:553) at org.jboss.deployers.plugins.deployers.DeployersImpl.process(DeployersImpl.java:781) at org.jboss.deployers.plugins.main.MainDeployerImpl.process(MainDeployerImpl.java:702) at org.jboss.system.server.profileservice.repository.MainDeployerAdapter.process(MainDeployerAdapter.java:117) at org.jboss.system.server.profileservice.repository.ProfileDeployAction.install(ProfileDeployAction.java:70) at org.jboss.system.server.profileservice.repository.AbstractProfileAction.install(AbstractProfileAction.java:53) at org.jboss.system.server.profileservice.repository.AbstractProfileService.install(AbstractProfileService.java:361) at org.jboss.dependency.plugins.AbstractControllerContext. 18:53:44,313 INFO [STDOUT] install(AbstractControllerContext.java:348) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:1631) at org.jboss.dependency.plugins.AbstractController.incrementState(AbstractController.java:934) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1082) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:984) at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:822) at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:553) at org.jboss.system.server.profileservice.repository.AbstractProfileService.activateProfile(AbstractProfileService.java:306) at org.jboss.system.server.profileservice.ProfileServiceBootstrap.start(ProfileServiceBootstrap.java:271) at org.jboss.bootstrap.AbstractServerImpl.start(AbstractServerImpl.java:461) at org.jboss.Main.boot(Main.java:221) at org.jboss.Main$1.run(Main.java:556) at java.lang.Thread.run(Thread.java:619) 18:53:44,315 ERROR [[/smartLMS]] Exception sending context initialized event to listener instance of class org.springframework.web.context.ContextLoaderListener org.springframework.beans.factory.BeanDefinitionStoreException: Unexpected exception parsing XML document from ServletContext resource [/WEB-INF/applicationContext.xml]; nested exception is java.lang.IllegalArgumentException: Class [org.apache.cxf.transport.http_jetty.spring.NamespaceHandler] does not implement the NamespaceHandler interface Caused by: java.lang.IllegalArgumentException: Class [org.apache.cxf.transport.http_jetty.spring.NamespaceHandler] does not implement the NamespaceHandler interface at org.springframework.beans.factory.xml.DefaultNamespaceHandlerResolver.initHandlerMappings(DefaultNamespaceHandlerResolver.java:119) at org.springframework.beans.factory.xml.DefaultNamespaceHandlerResolver.(DefaultNamespaceHandlerResolver.java:96) at org.springframework.beans.factory.xml.DefaultNamespaceHandlerResolver.(DefaultNamespaceHandlerResolver.java:82) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.createDefaultNamespaceHandlerResolver(XmlBeanDefinitionReader.java:526) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.createReaderContext(XmlBeanDefinitionReader.java:515) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.registerBeanDefinitions(XmlBeanDefinitionReader.java:495) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadBeanDefinitions(XmlBeanDefinitionReader.java:390) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBeanDefinitions(XmlBeanDefinitionReader.java:340) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBeanDefinitions(XmlBeanDefinitionReader.java:317) at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:125) at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:141) at org.springframework.web.context.support.XmlWebApplicationContext.loadBeanDefinitions(XmlWebApplicationContext.java:123) Thanks, Rahul.

    Read the article

  • Salesforce/PHP - Bulk Outbound message (SOAP), Time out issue - See update #2

    - by Phill Pafford
    Salesforce can send up to 100 requests inside 1 SOAP message. While sending this type of Bulk Ooutbound message request my PHP script finishes executing but SF fails to accept the ACK used to clear the message queue on the Salesforce side of things. Looking at the Outbound message log (monitoring) I see all the messages in a pending state with the Delivery Failure Reason "java.net.SocketTimeoutException: Read timed out". If my script has finished execution, why do I get this error? I have tried these methods to increase the execution time on my server as I have no access on the Salesforce side: set_time_limit(0); // in the script max_execution_time = 360 ; Maximum execution time of each script, in seconds max_input_time = 360 ; Maximum amount of time each script may spend parsing request data memory_limit = 32M ; Maximum amount of memory a script may consume I used the high settings just for testing. Any thoughts as to why this is failing the ACK delivery back to Salesforce? Here is some of the code: This is how I accept and send the ACK file for the imcoming SOAP request $data = 'php://input'; $content = file_get_contents($data); if($content) { respond('true'); } else { respond('false'); } The respond function function respond($tf) { $ACK = <<<ACK <?xml version = "1.0" encoding = "utf-8"?> <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <soapenv:Body> <notifications xmlns="http://soap.sforce.com/2005/09/outbound"> <Ack>$tf</Ack> </notifications> </soapenv:Body> </soapenv:Envelope> ACK; print trim($ACK); } These are in a generic script that I include into the script that uses the data for a specific workflow. I can process about 25 requests (That are in 1 SOAP response) but once I go over that I get the timeout error in the Salesforce queue. for 50 requests is usually takes my PHP script 86.77 seconds. Could it be Apache? PHP? I have also tested just accepting the 100 request SOAP response and just accepting and sending the ACK the queue clears out, so I know it's on my side of things. I show no errors in the apache log, the script runs fine. I did find some info on the Salesforce site but still no luck. Here is the link. Also I'm using the PHP Toolkit 11 (From Salesforce). Other forum with good SF help Thanks for any insight into this, --Phill UPDATE: If I receive the incoming message and print the response, should this happen first regardless if I do anything else after? Or does it wait for my process to finish and then print the response? UPDATE #2: okay I think I have the problem: PHP uses the single thread processing approach and will not send back the ACK file until the thread has completed it's processing. Is there a way to make this a mutli thread process? Thread #1 - accept the incoming SOAP request and send back the ACK Thread #2 - Process the SOAP request I know I could break it up into like a DB table or flat file, but is there a way to accomplish this without doing that? I'm going to try to close the socket after the ACK submission and continue the processing, cross my fingers it will work.

    Read the article

  • Emails forwarded via postfix get flagged as spam and forged in Gmail

    - by Kendall Hopkins
    I'm trying to setup a forwarding only email server. I'm running into the problem where all messages forwarded via postfix are getting put into gmail's spam folder and getting flagged as forged. I'm testing a very similar setup on a cpanel box and their forwarded emails make it through without any problem. Things I've done: Setup reverse dns on forwarding box Setup SPF record for forwarding box domain CPanel route (not flagged as spam): [email protected] - [email protected] - [email protected] AWS postfix route (flagged as spam): [email protected] - [email protected] - [email protected] Gmail error message: /etc/postfix/main.cf myhostname = sputnik.*domain*.com smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no append_dot_mydomain = no readme_directory = no myorigin = /etc/mailname mydestination = sputnik.*domain*.com, localhost.*domain*.com, , localhost relayhost = mynetworks = 127.0.0.0/8 10.0.0.0/24 [::1]/128 [fe80::%eth0]/64 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = all virtual_alias_maps = hash:/etc/postfix/virtual Email forwarded by CPanel (doesn't get marked as spam): Delivered-To: *personaluser*@gmail.com Received: by 10.182.144.98 with SMTP id sl2csp14396obb; Wed, 9 May 2012 09:18:36 -0700 (PDT) Received: by 10.182.52.38 with SMTP id q6mr1137571obo.8.1336580316700; Wed, 09 May 2012 09:18:36 -0700 (PDT) Return-Path: <mail@*personaldomain*.com> Received: from web6.*domain*.com (173.193.55.66-static.reverse.softlayer.com. [173.193.55.66]) by mx.google.com with ESMTPS id ec7si1845451obc.67.2012.05.09.09.18.36 (version=TLSv1/SSLv3 cipher=OTHER); Wed, 09 May 2012 09:18:36 -0700 (PDT) Received-SPF: neutral (google.com: 173.193.55.66 is neither permitted nor denied by best guess record for domain of mail@*personaldomain*.com) client-ip=173.193.55.66; Authentication-Results: mx.google.com; spf=neutral (google.com: 173.193.55.66 is neither permitted nor denied by best guess record for domain of mail@*personaldomain*.com) smtp.mail=mail@*personaldomain*.com Received: from mail-vb0-f43.google.com ([209.85.212.43]:56152) by web6.*domain*.com with esmtps (TLSv1:RC4-SHA:128) (Exim 4.77) (envelope-from <mail@*personaldomain*.com>) id 1SS9b2-0007J9-LK for mail@kendall.*domain*.com; Wed, 09 May 2012 12:18:36 -0400 Received: by vbbfq11 with SMTP id fq11so599132vbb.2 for <mail@kendall.*domain*.com>; Wed, 09 May 2012 09:18:35 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=mime-version:x-originating-ip:date:message-id:subject:from:to :content-type:x-gm-message-state; bh=Hr0AH40uUtx/w/u9hltbrhHJhRaD5ubKmz2gGg44VLs=; b=IBKi6Xalr9XVFYwdkWxn9PLRB69qqJ9AjUPdvGh8VxMNW4S+hF6r4GJcGOvkDn2drO kw5r4iOpGuWUQPEMHRPyO4+Ozc9SE9s4Px2oVpadR6v3hO+utvFGoj7UuchsXzHqPVZ8 A9FS4cKiE0E0zurTjR7pfQtZT64goeEJoI/CtvcoTXj/Mdrj36gZ2FYtO8Qj4dFXpfu9 uGAKa4jYfx9zwdvhLzQ3mouWwQtzssKUD+IvyuRppLwI2WFb9mWxHg9n8y9u5IaduLn7 7TvLIyiBtS3DgqSKQy18POVYgnUFilcDorJs30hxFxJhzfTFW1Gdhrwjvz0MTYDSRiGQ P4aw== MIME-Version: 1.0 Received: by 10.52.173.209 with SMTP id bm17mr326586vdc.54.1336580315681; Wed, 09 May 2012 09:18:35 -0700 (PDT) Received: by 10.220.191.134 with HTTP; Wed, 9 May 2012 09:18:35 -0700 (PDT) X-Originating-IP: [99.50.225.7] Date: Wed, 9 May 2012 12:18:35 -0400 Message-ID: <CA+tP6Viyn0ms5RJoqtd20ms3pmQCgyU0yy7GBiaALEACcDBC2g@mail.gmail.com> Subject: test5 From: Kendall Hopkins <mail@*personaldomain*.com> To: mail@kendall.*domain*.com Content-Type: multipart/alternative; boundary=bcaec51b9bf5ee11c004bf9cda9c X-Gm-Message-State: ALoCoQm3t1Hohu7fEr5zxQZsC8FQocg662Jv5MXlPXBnPnx2AiQrbLsNQNknLy39Su45xBMCM47K X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - web6.*domain*.com X-AntiAbuse: Original Domain - kendall.*domain*.com X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12] X-AntiAbuse: Sender Address Domain - *personaldomain*.com X-Source: X-Source-Args: X-Source-Dir: --bcaec51b9bf5ee11c004bf9cda9c Content-Type: text/plain; charset=ISO-8859-1 test5 --bcaec51b9bf5ee11c004bf9cda9c Content-Type: text/html; charset=ISO-8859-1 test5 --bcaec51b9bf5ee11c004bf9cda9c-- Email forwarded via AWS postfix box (marked as spam): Delivered-To: *personaluser*@gmail.com Received: by 10.182.144.98 with SMTP id sl2csp14350obb; Wed, 9 May 2012 09:17:46 -0700 (PDT) Received: by 10.229.137.143 with SMTP id w15mr389471qct.37.1336580266237; Wed, 09 May 2012 09:17:46 -0700 (PDT) Return-Path: <mail@*personaldomain*.com> Received: from sputnik.*domain*.com (sputnik.*domain*.com. [107.21.39.201]) by mx.google.com with ESMTP id o8si1330855qct.115.2012.05.09.09.17.46; Wed, 09 May 2012 09:17:46 -0700 (PDT) Received-SPF: neutral (google.com: 107.21.39.201 is neither permitted nor denied by best guess record for domain of mail@*personaldomain*.com) client-ip=107.21.39.201; Authentication-Results: mx.google.com; spf=neutral (google.com: 107.21.39.201 is neither permitted nor denied by best guess record for domain of mail@*personaldomain*.com) smtp.mail=mail@*personaldomain*.com Received: from mail-vb0-f52.google.com (mail-vb0-f52.google.com [209.85.212.52]) by sputnik.*domain*.com (Postfix) with ESMTP id A308122AD6 for <mail@*personaldomain2*.com>; Wed, 9 May 2012 16:17:45 +0000 (UTC) Received: by vbzb23 with SMTP id b23so448664vbz.25 for <mail@*personaldomain2*.com>; Wed, 09 May 2012 09:17:45 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=mime-version:x-originating-ip:date:message-id:subject:from:to :content-type:x-gm-message-state; bh=XAzjH9tUXn6SbadVSLwJs2JVbyY4arosdTuV8Nv+ARI=; b=U8gIgHd6mhWYqPU4MH/eyvo3kyZsDn/GiYwZj5CLbs6Zz/ZOXQkenRi7zW3ewVFi/9 uAFylT8SQ+Wjw2l6OgAioCTojfZ58s4H/JW+1bu460KAP9aeOTcZDNSsHlsj0wvH5XRV 4DQJa11kz+WFVtVVcFuB33WVUPAgJfXzY+pSTe+FWsrZyrrwL7/Vm9TSKI5PBwRN9i4g zAZabgkmw1o2THT3kbJi6vAbPzlqK2LVbgt82PP0emHdto7jl4iD5F6lVix4U0dsrtRv xuGUE0gDyIwJuR4Q5YTkNubwGH/Y2bFBtpx2q1IORANrolWxIGaZSceUWawABkBGPABX 1/eg== MIME-Version: 1.0 Received: by 10.52.96.169 with SMTP id dt9mr282954vdb.107.1336580265812; Wed, 09 May 2012 09:17:45 -0700 (PDT) Received: by 10.220.191.134 with HTTP; Wed, 9 May 2012 09:17:45 -0700 (PDT) X-Originating-IP: [99.50.225.7] Date: Wed, 9 May 2012 12:17:45 -0400 Message-ID: <CA+tP6VgqZrdxP543Y28d1eMwJAs4DxkS4EE6bvRL8nFoMkgnQQ@mail.gmail.com> Subject: test4 From: Kendall Hopkins <mail@*personaldomain*.com> To: mail@*personaldomain2*.com Content-Type: multipart/alternative; boundary=20cf307f37f6f521b304bf9cd79d X-Gm-Message-State: ALoCoQkrNcfSTWz9t6Ir87KEYyM+zJM4y1AbwP86NMXlk8B3ALhnis+olFCKdgPnwH/sIdzF3+Nh --20cf307f37f6f521b304bf9cd79d Content-Type: text/plain; charset=ISO-8859-1 test4 --20cf307f37f6f521b304bf9cd79d Content-Type: text/html; charset=ISO-8859-1 test4 --20cf307f37f6f521b304bf9cd79d--

    Read the article

  • Gearman too many processes issue

    - by Roman Newaza
    I use Net_Gearman from PECL, Gearmand 1.1.11 and Gearman Manager. Every time I add background job, I can see new worker listed with no Function, nor Id in Ggearman-Monitor: If I add many messages in the bash loop, after some time it becomes very slow. for i in $(seq 0 9999); do php Client.php && echo $i; done Yesterday, the situation was even worse - I had many error messages in Gearmand log regarding Too many open files and once I added --file-descriptors=49152 as an option and swithched to 1.1.11 from 1.0.6, these errors gone. Here is lsof -p $(cat /var/run/gearman/gearmand.pid) output: COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME gearmand 2020 gearman cwd DIR 8,2 4096 2 / gearmand 2020 gearman rtd DIR 8,2 4096 2 / gearmand 2020 gearman txt REG 8,2 3852472 3672962 /opt/sbin/gearmand gearmand 2020 gearman mem REG 8,2 52120 9961752 /lib/x86_64-linux-gnu/libnss_files-2.15.so gearmand 2020 gearman mem REG 8,2 47680 9961756 /lib/x86_64-linux-gnu/libnss_nis-2.15.so gearmand 2020 gearman mem REG 8,2 97248 9961768 /lib/x86_64-linux-gnu/libnsl-2.15.so gearmand 2020 gearman mem REG 8,2 35680 9961750 /lib/x86_64-linux-gnu/libnss_compat-2.15.so gearmand 2020 gearman mem REG 8,2 92720 9964871 /lib/x86_64-linux-gnu/libz.so.1.2.3.4 gearmand 2020 gearman mem REG 8,2 109288 11014600 /usr/lib/x86_64-linux-gnu/libsasl2.so.2.0.25 gearmand 2020 gearman mem REG 8,2 1030512 9961759 /lib/x86_64-linux-gnu/libm-2.15.so gearmand 2020 gearman mem REG 8,2 1930616 9964982 /lib/x86_64-linux-gnu/libcrypto.so.1.0.0 gearmand 2020 gearman mem REG 8,2 382896 9964977 /lib/x86_64-linux-gnu/libssl.so.1.0.0 gearmand 2020 gearman mem REG 8,2 1815224 9961748 /lib/x86_64-linux-gnu/libc-2.15.so gearmand 2020 gearman mem REG 8,2 88384 9964865 /lib/x86_64-linux-gnu/libgcc_s.so.1 gearmand 2020 gearman mem REG 8,2 962656 11014043 /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.16 gearmand 2020 gearman mem REG 8,2 199600 11016157 /usr/lib/x86_64-linux-gnu/libmemcached.so.11.0.0 gearmand 2020 gearman mem REG 8,2 31752 9961755 /lib/x86_64-linux-gnu/librt-2.15.so gearmand 2020 gearman mem REG 8,2 14768 9961763 /lib/x86_64-linux-gnu/libdl-2.15.so gearmand 2020 gearman mem REG 8,2 414280 9183971 /usr/lib/libboost_program_options.so.1.46.1 gearmand 2020 gearman mem REG 8,2 283832 9183656 /usr/lib/libevent-2.0.so.5.1.4 gearmand 2020 gearman mem REG 8,2 664504 11014432 /usr/lib/x86_64-linux-gnu/libsqlite3.so.0.8.6 gearmand 2020 gearman mem REG 8,2 135366 9961757 /lib/x86_64-linux-gnu/libpthread-2.15.so gearmand 2020 gearman mem REG 8,2 3534240 9175810 /usr/lib/libmysqlclient.so.18.1.0 gearmand 2020 gearman mem REG 8,2 149280 9961760 /lib/x86_64-linux-gnu/ld-2.15.so gearmand 2020 gearman 0u CHR 1,3 0t0 1029 /dev/null gearmand 2020 gearman 1u CHR 1,3 0t0 1029 /dev/null gearmand 2020 gearman 2u CHR 1,3 0t0 1029 /dev/null gearmand 2020 gearman 3w REG 8,2 9381897 3409366 /var/log/gearman-job-server/gearman.log gearmand 2020 gearman 4r FIFO 0,8 0t0 38869143 pipe gearmand 2020 gearman 5w FIFO 0,8 0t0 38869143 pipe gearmand 2020 gearman 6u 0000 0,9 0 6826 anon_inode gearmand 2020 gearman 7u unix 0xffff880230fdf500 0t0 38869144 socket gearmand 2020 gearman 8u unix 0xffff880230fdde40 0t0 38869145 socket gearmand 2020 gearman 9u IPv4 38869146 0t0 TCP localhost:4730 (LISTEN) gearmand 2020 gearman 10r FIFO 0,8 0t0 38869147 pipe gearmand 2020 gearman 11w FIFO 0,8 0t0 38869147 pipe gearmand 2020 gearman 12u 0000 0,9 0 6826 anon_inode gearmand 2020 gearman 13u unix 0xffff880230fde4c0 0t0 38869148 socket gearmand 2020 gearman 14u unix 0xffff880230fdeb40 0t0 38869149 socket gearmand 2020 gearman 15r FIFO 0,8 0t0 38869150 pipe gearmand 2020 gearman 16w FIFO 0,8 0t0 38869150 pipe gearmand 2020 gearman 17u 0000 0,9 0 6826 anon_inode gearmand 2020 gearman 18u 0000 0,9 0 6826 anon_inode gearmand 2020 gearman 19u unix 0xffff880230fdb400 0t0 38869151 socket gearmand 2020 gearman 20u unix 0xffff880230fdaa40 0t0 38869152 socket gearmand 2020 gearman 21r FIFO 0,8 0t0 38869153 pipe gearmand 2020 gearman 22w FIFO 0,8 0t0 38869153 pipe gearmand 2020 gearman 23u unix 0xffff880203cfce00 0t0 38868290 socket gearmand 2020 gearman 24u unix 0xffff880203cfdb00 0t0 38868291 socket gearmand 2020 gearman 25r FIFO 0,8 0t0 38868292 pipe gearmand 2020 gearman 26w FIFO 0,8 0t0 38868292 pipe gearmand 2020 gearman 27u 0000 0,9 0 6826 anon_inode gearmand 2020 gearman 28u unix 0xffff880203cf9040 0t0 38868293 socket gearmand 2020 gearman 29u unix 0xffff880203cfaa40 0t0 38868294 socket gearmand 2020 gearman 30r FIFO 0,8 0t0 38868295 pipe gearmand 2020 gearman 31w FIFO 0,8 0t0 38868295 pipe gearmand 2020 gearman 32u IPv4 38868324 0t0 TCP localhost:4730->localhost:57954 (ESTABLISHED) gearmand 2020 gearman 33u IPv4 38868325 0t0 TCP localhost:4730->localhost:57955 (ESTABLISHED) gearmand 2020 gearman 34u IPv4 38901247 0t0 TCP localhost:4730->localhost:38594 (ESTABLISHED) gearmand 2020 gearman 35u IPv4 38868327 0t0 TCP localhost:4730->localhost:57957 (ESTABLISHED) gearmand 2020 gearman 36u IPv4 38867483 0t0 TCP localhost:4730->localhost:57959 (ESTABLISHED) gearmand 2020 gearman 37u IPv4 38867484 0t0 TCP localhost:4730->localhost:57958 (ESTABLISHED) gearmand 2020 gearman 38u IPv4 38901248 0t0 TCP localhost:4730->localhost:38595 (CLOSE_WAIT) gearmand 2020 gearman 39u IPv4 38901249 0t0 TCP localhost:4730->localhost:38597 (ESTABLISHED) gearmand 2020 gearman 40u IPv4 38869201 0t0 TCP localhost:4730->localhost:57979 (ESTABLISHED) gearmand 2020 gearman 41u IPv4 38900437 0t0 TCP localhost:4730->localhost:38599 (ESTABLISHED) gearmand 2020 gearman 42u IPv4 38900438 0t0 TCP localhost:4730->localhost:38602 (ESTABLISHED) gearmand 2020 gearman 43u IPv4 38868375 0t0 TCP localhost:4730->localhost:57987 (ESTABLISHED) gearmand 2020 gearman 44u IPv4 38900468 0t0 TCP localhost:4730->localhost:38606 (CLOSE_WAIT) gearmand 2020 gearman 45u IPv4 38868381 0t0 TCP localhost:4730->localhost:57999 (ESTABLISHED) gearmand 2020 gearman 46u IPv4 38868388 0t0 TCP localhost:4730->localhost:58007 (ESTABLISHED) gearmand 2020 gearman 47u IPv4 38868393 0t0 TCP localhost:4730->localhost:58011 (ESTABLISHED) gearmand 2020 gearman 48u IPv4 38903950 0t0 TCP localhost:4730->localhost:38609 (ESTABLISHED) gearmand 2020 gearman 49u IPv4 38870276 0t0 TCP localhost:4730->localhost:58019 (ESTABLISHED) gearmand 2020 gearman 50u IPv4 38903955 0t0 TCP localhost:4730->localhost:38613 (ESTABLISHED) gearmand 2020 gearman 51u IPv4 38900477 0t0 TCP localhost:4730->localhost:38617 (CLOSE_WAIT) gearmand 2020 gearman 52u IPv4 38867630 0t0 TCP localhost:4730->localhost:58031 (ESTABLISHED) gearmand 2020 gearman 53u IPv4 38867633 0t0 TCP localhost:4730->localhost:58035 (ESTABLISHED) gearmand 2020 gearman 54u IPv4 38867636 0t0 TCP localhost:4730->localhost:58039 (ESTABLISHED) gearmand 2020 gearman 55u IPv4 38900536 0t0 TCP localhost:4730->localhost:38619 (ESTABLISHED) gearmand 2020 gearman 56u IPv4 38868419 0t0 TCP localhost:4730->localhost:58047 (ESTABLISHED) gearmand 2020 gearman 57u IPv4 38869263 0t0 TCP localhost:4730->localhost:58051 (ESTABLISHED) gearmand 2020 gearman 58u IPv4 38900537 0t0 TCP localhost:4730->localhost:38621 (ESTABLISHED) gearmand 2020 gearman 59u IPv4 38869271 0t0 TCP localhost:4730->localhost:58059 (ESTABLISHED) gearmand 2020 gearman 60u IPv4 38900538 0t0 TCP localhost:4730->localhost:38623 (ESTABLISHED) gearmand 2020 gearman 61u IPv4 38870319 0t0 TCP localhost:4730->localhost:58067 (ESTABLISHED) gearmand 2020 gearman 62u IPv4 38900540 0t0 TCP localhost:4730->localhost:38628 (ESTABLISHED) gearmand 2020 gearman 63u IPv4 38869289 0t0 TCP localhost:4730->localhost:58075 (ESTABLISHED) ... gearmand 2020 gearman 2229u IPv4 38903885 0t0 TCP localhost:4730->localhost:38572 (ESTABLISHED) gearmand 2020 gearman 2230u IPv4 38901211 0t0 TCP localhost:4730->localhost:38576 (ESTABLISHED) gearmand 2020 gearman 2234u IPv4 38901237 0t0 TCP localhost:4730->localhost:38588 (ESTABLISHED)

    Read the article

  • Java: micro-optimizing array manipulation

    - by Martin Wiboe
    Hello all, I am trying to make a Java port of a simple feed-forward neural network. This obviously involves lots of numeric calculations, so I am trying to optimize my central loop as much as possible. The results should be correct within the limits of the float data type. My current code looks as follows (error handling & initialization removed): /** * Simple implementation of a feedforward neural network. The network supports * including a bias neuron with a constant output of 1.0 and weighted synapses * to hidden and output layers. * * @author Martin Wiboe */ public class FeedForwardNetwork { private final int outputNeurons; // No of neurons in output layer private final int inputNeurons; // No of neurons in input layer private int largestLayerNeurons; // No of neurons in largest layer private final int numberLayers; // No of layers private final int[] neuronCounts; // Neuron count in each layer, 0 is input // layer. private final float[][][] fWeights; // Weights between neurons. // fWeight[fromLayer][fromNeuron][toNeuron] // is the weight from fromNeuron in // fromLayer to toNeuron in layer // fromLayer+1. private float[][] neuronOutput; // Temporary storage of output from previous layer public float[] compute(float[] input) { // Copy input values to input layer output for (int i = 0; i < inputNeurons; i++) { neuronOutput[0][i] = input[i]; } // Loop through layers for (int layer = 1; layer < numberLayers; layer++) { // Loop over neurons in the layer and determine weighted input sum for (int neuron = 0; neuron < neuronCounts[layer]; neuron++) { // Bias neuron is the last neuron in the previous layer int biasNeuron = neuronCounts[layer - 1]; // Get weighted input from bias neuron - output is always 1.0 float activation = 1.0F * fWeights[layer - 1][biasNeuron][neuron]; // Get weighted inputs from rest of neurons in previous layer for (int inputNeuron = 0; inputNeuron < biasNeuron; inputNeuron++) { activation += neuronOutput[layer-1][inputNeuron] * fWeights[layer - 1][inputNeuron][neuron]; } // Store neuron output for next round of computation neuronOutput[layer][neuron] = sigmoid(activation); } } // Return output from network = output from last layer float[] result = new float[outputNeurons]; for (int i = 0; i < outputNeurons; i++) result[i] = neuronOutput[numberLayers - 1][i]; return result; } private final static float sigmoid(final float input) { return (float) (1.0F / (1.0F + Math.exp(-1.0F * input))); } } I am running the JVM with the -server option, and as of now my code is between 25% and 50% slower than similar C code. What can I do to improve this situation? Thank you, Martin Wiboe

    Read the article

  • Zoom on multiple areas in d3.js

    - by t2k32316
    I'm planning to have a geoJSON map inside my svg alongside other svg elements. I would like to be able to zoom (zoom+pan) in the map and keep the map in the same location with a bounding box. I can accomplish this by using a clipPath to keep the map within a rectangular area. The problem is that I also want to enable zooming and panning on my entire svg. If I do d3.select("svg").call(myzoom); this overrides any zoom I applied to my map. How can I apply zoom to both my entire svg and to my map? That is, I want to be able to zoom+pan on my map when my mouse is in the map's bounding box, and when the mouse is outside the bounding box, zoom+pan on the entire svg. Here's example code: http://bl.ocks.org/nuernber/aeaac0e8edcf7ca93ade. (how do I get around the cross domain issue to load the map?) <svg id="svg" width="640" height="480" xmlns="http://www.w3.org/2000/svg" version="1.1"> <defs> <clipPath id="rectClip"> <rect x="150" y="25" width="400" height="400" style="stroke: gray; fill: none;"/> </clipPath> </defs> <g id="outer_group"> <circle cx="100" cy="50" r="40" stroke="black" stroke-width="2" fill="red" /> <g id="svg_map" style="clip-path: url(#rectClip);"> </g> </g> </svg><br/> <script type="text/javascript"> var svg = d3.select("#svg_map"); var mapGroup = svg.append("g"); var projection = d3.geo.mercator(); var path = d3.geo.path().projection(projection); var zoom = d3.behavior.zoom() .translate(projection.translate()) .scale(projection.scale()) .on("zoom", zoomed); mapGroup.call(zoom); var pan = d3.behavior.zoom() .on("zoom", panned); d3.select("svg").call(pan); mapGroup.attr("transform", "translate(200,0) scale(2,2)"); d3.json("ne_110m_admin_0_countries/ne_110m_admin_0_countries.geojson", function(collection) { mapGroup.selectAll("path").data(collection.features) .enter().append("path") .attr("d", path) .attr("id", function(d) { return d.properties.name.replace(/\s+/g, "")}) .style("fill", "gray").style("stroke", "white").style("stroke-width",1); } ); function panned() { var x = d3.event.translate[0]; var y = d3.event.translate[1]; d3.select("#outer_group").attr("transform", "translate("+x+","+y+") scale(" + d3.event.scale + ")"); } function zoomed() { previousScale = d3.event.scale; projection.translate(d3.event.translate).scale(d3.event.scale); translationOffset = d3.event.translate; mapGroup.selectAll("path").attr("d", path); } </script>

    Read the article

  • Ldap ssh authentication is super slow... any way to speed it up?

    - by Johnathon
    I am running OpenSUSE. Here is the output of ssh -vvv: OpenSSH_5.8p1, OpenSSL 1.0.0c 2 Dec 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to <ipaddress> [ipaddress] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug3: Incorrect RSA1 identifier debug3: Could not load "/root/.ssh/id_rsa" as a RSA1 public key debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /root/.ssh/id_rsa type 1 debug1: identity file /root/.ssh/id_rsa-cert type -1 debug1: identity file /root/.ssh/id_dsa type -1 debug1: identity file /root/.ssh/id_dsa-cert type -1 debug1: identity file /root/.ssh/id_ecdsa type -1 debug1: identity file /root/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1 debug1: match: OpenSSH_5.1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8 debug2: fd 3 setting O_NONBLOCK debug3: load_hostkeys: loading entries for host "ipaddress" from file "/root/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /root/.ssh/known_hosts:4 debug3: load_hostkeys: loaded 1 keys debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected],[email protected],ssh-rsa debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],ssh-rsa,[email protected],[email protected],[email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 138/256 debug2: bits set: 529/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA cb:7f:ff:2e:65:28:f0:95:e6:8a:71:24:2a:67:02:2b debug3: load_hostkeys: loading entries for host "<ipaddress>" from file "/root/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /root/.ssh/known_hosts:4 debug3: load_hostkeys: loaded 1 keys debug1: Host '<ipaddress>' is known and matches the RSA host key. debug1: Found key in /root/.ssh/known_hosts:4 debug2: bits set: 504/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /root/.ssh/id_rsa (0xb789d5c8) debug2: key: /root/.ssh/id_dsa ((nil)) debug2: key: /root/.ssh/id_ecdsa ((nil)) debug1: Authentications that can continue: publickey,keyboard-interactive debug3: start over, passed a different list publickey,keyboard-interactive debug3: preferred publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /root/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply It hangs here for a good 30 seconds to a minute then debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Trying private key: /root/.ssh/id_dsa debug3: no such identity: /root/.ssh/id_dsa debug1: Trying private key: /root/.ssh/id_ecdsa debug3: no such identity: /root/.ssh/id_ecdsa debug2: we did not send a packet, disable method debug3: authmethod_lookup keyboard-interactive debug3: remaining preferred: password debug3: authmethod_is_enabled keyboard-interactive debug1: Next authentication method: keyboard-interactive debug2: userauth_kbdint debug2: we sent a keyboard-interactive packet, wait for reply debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 1 I added PubkeyAuthentication no to the /etc/ssh/ssh_config and the /etc/ssh/sshd_config which makes it faster getting to the password prompt, but the password prompt still takes some time. Any way to fix that? Here is where the password hangs debug3: packet_send2: adding 32 (len 25 padlen 7 extra_pad 64) debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 0 debug3: packet_send2: adding 48 (len 10 padlen 6 extra_pad 64) debug1: Authentication succeeded (keyboard-interactive). Authenticated to ipaddress ([ipaddress]:22). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. FIXED!!!!!!!!!!!!!! What is did... In the nsswitch_conf I had ldap included in the group and passwd which slows it down a lot. Thank you everybody for your input passwd: compat group: files hosts: files dns networks: files dns

    Read the article

  • How can I center XHTML content with CSS?

    - by drea
    so I recently converted a website of mine from a table content format to a div content format. Table format Version: Table version of the website: here. Table version style CSS: body { width: 1020px; margin: 0 auto; background-image: url(images/bg.png); } .logo{ width:301px; height:151px; background:url(images/logo.png); text-indent:-9999px; border:none; cursor:pointer; } .logo:hover { opacity:0.9; } .signin{ width:69px; height:30px; background:url(images/signin.png); text-indent:-9999px; border:none; cursor:pointer; } .signin:hover { opacity:0.9; } .register{ width:79px; height:30px; background:url(images/register.png); text-indent:-9999px; border:none; cursor:pointer; } .register:hover { opacity:0.9; } .Contact_Us{ width:53px; height:9px; background:url(images/Contact_Us.png); text-indent:-9999px; border:none; cursor:pointer; } .Contact_Us:hover { opacity:0.9; } .Code_of_Conduct{ width:84px; height:9px; background:url(images/Code_of_Conduct.png); text-indent:-9999px; border:none; cursor:pointer; } .Code_of_Conduct:hover { opacity:0.9; } .Privacy_Policy{ width:65px; height:12px; background:url(images/Privacy_Policy.png); text-indent:-9999px; border:none; cursor:pointer; } .Privacy_Policy:hover { opacity:0.9; } .Copyright{ width:149px; height:9px; background:url(images/Copyright.png); text-indent:-9999px; border:none; cursor:pointer; } .Copyright:hover { opacity:0.9; } .slideshow{ width:301px; height:151px; background: url(slideshow.png), url(minecraft.png), url(tf2.png), url(CSS.png), url(GM.png), url(aos.png), url(CSGO.png), url(voip.png), text-indent:-9999px; border:none; cursor:pointer; } .slideshow:hover { opacity:0.9; } Table version source: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head profile="http://www.w3.org/2005/10/profile"> <link rel="icon" type="image/png" href="http://www.xodusen.com/resources/images/favicon.png"> <title>Welcome to XodusEN</title> <script type="text/javascript" src="https://ajax.googleapis.com/ajax/libs/jquery/1.8.0/jquery.min.js"></script> <script type="text/javascript" src="http://cloud.github.com/downloads/malsup/cycle/jquery.cycle.all.latest.js"></script> <script type="text/javascript"> $(document).ready(function() { $('.slideshow').cycle({ fx: 'fade' // choose your transition type, ex: fade, scrollUp, shuffle, etc... }); }); </script> <meta name="description" content="This is the homepage of XodusEN. Xodus Entertainment Network is a unique & friendly Gaming Community that welcomes & realises the potential, and value within any user regardless of their origin. " > <meta name="keywords" content="XeN, Xodus, XEN, xen, Xodus Entertainment Network, gaming, community, PC, Steam, XBL, Xbox 360, PSN, Playstation, games, Gaming, Community, XodusEN, Gaming Network, Network, TF2, Server, CS:S, Minecraft, premium, servers, Counter-Strike: Source, Website, Homepage, Minecraftia" > <meta http-equiv="Content-Type" content="text/html; charset=utf-8"> <link href="style.css" rel="stylesheet" type="text/css"> <!--[if IE]> <script type="text/javascript"> window.location = "http://www.xodusen.com/ie/"; </script> <![endif]--> </head> <body bgcolor="#d7d7d7"> <table id="Table_01" border="0" cellpadding="0" cellspacing="0"> <tr> <td colspan="18"> <img src="images/index_01.png" width="1020" height="9" alt=""></td> <td> <img src="images/spacer.gif" width="1" height="9" alt=""></td> </tr> <tr> <td colspan="11" rowspan="2"> <img src="images/index_02.png" width="826" height="252" alt=""></td> <td> <a id="signin" class="signin" href="http://s.xodusen.com/VrtqYm"> <img src="images/signin.png" width="69" height="30" border="0" alt=""></a> <td rowspan="6"> <img src="images/index_04.png" width="3" height="643" alt=""></td> <td colspan="3"> <a id="register" class="register" href="http://s.xodusen.com/WW3rpZ"> <img src="images/Register.png" width="79" height="30" border="0" alt=""></a> <td colspan="2" rowspan="6"> <img src="images/index_06.png" width="43" height="643" alt=""></td> <td> <img src="images/spacer.gif" width="1" height="30" alt=""></td> </tr> <tr> <td rowspan="5"> <img src="images/index_07.png" width="69" height="613" alt=""></td> <td colspan="3" rowspan="5"> <img src="images/index_08.png" width="79" height="613" alt=""></td> <td> <img src="images/spacer.gif" width="1" height="222" alt=""></td> </tr> <tr> <td colspan="5"> <img src="images/index_09.png" width="385" height="53" alt=""></td> <td> <img src="images/index_10.png" width="250" height="53" alt=""></td> <td colspan="5"> <img src="images/index_11.png" width="191" height="53" alt=""></td> <td> <img src="images/spacer.gif" width="1" height="53" alt=""></td> </tr> <tr> <td colspan="4" rowspan="3"> <img src="images/index_09-13.png" width="360" height="338" alt=""></td> <td colspan="3"> <a id="logo" class="logo" href="http://www.xodusen.com/community"> <img src="images/logo.png" alt=""></a> </td> <td colspan="4" rowspan="3"> <img src="images/index_11-15.png" width="165" height="338" alt=""></td> <td> <img src="images/spacer.gif" width="1" height="151" alt=""></td> </tr> <tr> <td rowspan="2"> <img src="images/index_09-16.png" width="25" height="187" alt=""></td> <td> <img src="images/index_16.png" width="250" height="46" alt=""></td> <td rowspan="2"> <img src="images/index_11-18.png" width="26" height="187" alt=""></td> <td> <img src="images/spacer.gif" width="1" height="46" alt=""></td> </tr> <tr> <td> <img src="images/index_12.png" width="250" height="141" alt=""></td> <td> <img src="images/spacer.gif" width="1" height="141" alt=""></td> </tr> <tr> <td rowspan="7"> <img src="images/index_13.png" width="27" height="548" alt=""></td> <td colspan="16" id="slideshow" class="slideshow"> <a href="http://www.xodusen.com/community"><img src="images/slideshow.png" width="960" height="305" alt=""></a> <a href="http://www.xodusen.com/mcurl"><img src="images/minecraft.png" width="960" height="305" alt=""></a> <a href="steam://connect/74.121.188.194:27015"><img src="images/tf2.png" width="960" height="305" alt=""></a> <a href="steam://connect/74.121.188.195:27015"><img src="images/CSS.png" width="960" height="305" alt=""></a> <a href="steam://connect/74.121.188.197:27015"><img src="images/GM.png" width="960" height="305" alt=""></a> <a href="aos://3267131722:32887"><img src="images/aos.png" width="960" height="305" alt=""></a> <a href="steam://connect/74.121.188.196:27015"><img src="images/CSGO.png" width="960" height="305" alt=""></a></td> <td rowspan="7"> <img src="images/index_15.png" width="33" height="548" alt=""></td> <td> <img src="images/spacer.gif" width="1" height="305" alt=""></td> </tr> <tr> <td colspan="16"> <img src="images/index_16-23.png" width="960" height="155" alt=""></td> <td> <img src="images/spacer.gif" width="1" height="155" alt=""></td> </tr> <tr> <td rowspan="5"> <img src="images/index_17.png" width="38" height="88" alt=""></td> <td rowspan="2"> <a id="Copyright" class="Copyright" href="http://www.xodusen.com/community"> <img src="images/Copyright.png" width="149" height="9" border="0" alt=""></a></td> <td colspan="14"> <img src="images/index_25.png" width="773" height="5" alt=""></td> <td> <img src="images/spacer.gif" width="1" height="5" alt=""></td> </tr> <tr> <td colspan="5" rowspan="4"> <img src="images/index_20.png" width="527" height="83" alt=""></td> <td rowspan="3"> <a id="Privacy_Policy" class="Privacy_Policy" href="http://s.xodusen.com/VhGEkH"> <img src="images/Privacy_Policy.png" width="65" height="12" border="0" alt=""></a></td> <td rowspan="4"> <img src="images/index_28.png" width="8" height="83" alt=""></td> <td colspan="3" rowspan="2"> <a id="Code_of_Conduct" class="Code_of_Conduct" href="http://s.xodusen.com/Tf5Gz7"> <img src="images/Code_of_Conduct.png" width="84" height="9" border="0" alt=""></a></td> <td rowspan="4"> <img src="images/index_30.png" width="6" height="83" alt=""></td> <td rowspan="2"> <a id="Contact_Us" class="Contact_Us" href="http://s.xodusen.com/T5EYsG"> <img src="images/Contact_Us.png" width="53" height="9" border="0" alt=""></a></td> <td colspan="2" rowspan="4"> <img src="images/index_26.png" width="30" height="83" alt=""></td> <td> <img src="images/spacer.gif" width="1" height="4" alt=""></td> </tr> <tr> <td rowspan="3"> <img src="images/index_27.png" width="149" height="79" alt=""></td> <td> <img src="images/spacer.gif" width="1" height="5" alt=""></td> </tr> <tr> <td colspan="3" rowspan="2"> <img src="images/index_28-35.png" width="84" height="74" alt=""></td> <td rowspan="2"> <img src="images/index_29.png" width="53" height="74" alt=""></td> <td> <img src="images/spacer.gif" width="1" height="3" alt=""></td> </tr> <tr> <td> <img src="images/index_30-37.png" width="65" height="71" alt=""></td> <td> <img src="images/spacer.gif" width="1" height="71" alt=""></td> </tr> <tr> <td> <img src="images/spacer.gif" width="27" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="38" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="149" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="146" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="25" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="250" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="26" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="80" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="65" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="8" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="12" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="69" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="3" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="6" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="53" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="20" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="10" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="33" height="1" alt=""></td> <td></td> </tr> </table> </body> </html> Div format Version: Div version of the website: here. Div version style CSS: body { width: 1020px; margin: 0 auto; background-image: url(images/bg.png); } #Table_01 { position:absolute; left:0px; top:0px; width:1020px; height:1200px; } #index-01_ { position:absolute; left:0px; top:0px; width:1020px; height:9px; } #index-02_ { position:absolute; left:0px; top:9px; width:826px; height:305px; } #Signin_ { position:absolute; left:826px; top:9px; width:69px; height:30px; } #index-04_ { position:absolute; left:895px; top:9px; width:3px; height:643px; } #Register_ { position:absolute; left:898px; top:9px; width:79px; height:30px; } #index-06_ { position:absolute; left:977px; top:9px; width:43px; height:643px; } #index-07_ { position:absolute; left:826px; top:39px; width:69px; height:613px; } #index-08_ { position:absolute; left:898px; top:39px; width:79px; height:613px; } #index-09_ { position:absolute; left:0px; top:314px; width:360px; height:338px; } #Logo_ { position:absolute; left:360px; top:314px; width:301px; height:151px; } #index-11_ { position:absolute; left:661px; top:314px; width:165px; height:338px; } #index-12_ { position:absolute; left:360px; top:465px; width:301px; height:187px; } #index-13_ { position:absolute; left:0px; top:652px; width:27px; height:548px; } #Slideshow_ { position:absolute; left:27px; top:652px; width:960px; height:305px; } #index-15_ { position:absolute; left:987px; top:652px; width:33px; height:548px; } #index-16_ { position:absolute; left:27px; top:957px; width:960px; height:155px; } #index-17_ { position:absolute; left:27px; top:1112px; width:39px; height:88px; } #Copyright_ { position:absolute; left:66px; top:1112px; width:148px; height:13px; } #index-19_ { position:absolute; left:214px; top:1112px; width:773px; height:5px; } #index-20_ { position:absolute; left:214px; top:1117px; width:526px; height:83px; } #Privacy-Policy_ { position:absolute; left:740px; top:1117px; width:68px; height:23px; } #index-22_ { position:absolute; left:808px; top:1117px; width:6px; height:83px; } #Code-of-Conduct_ { position:absolute; left:814px; top:1117px; width:84px; height:23px; } #index-24_ { position:absolute; left:898px; top:1117px; width:2px; height:83px; } #Contact-Us_ { position:absolute; left:900px; top:1117px; width:57px; height:23px; } #index-26_ { position:absolute; left:957px; top:1117px; width:30px; height:83px; } #index-27_ { position:absolute; left:66px; top:1125px; width:148px; height:75px; } #index-28_ { position:absolute; left:740px; top:1140px; width:68px; height:60px; } #index-29_ { position:absolute; left:814px; top:1140px; width:84px; height:60px; } #index-30_ { position:absolute; left:900px; top:1140px; width:57px; height:60px; } .logo{ width:301px; height:151px; background:url(images/logo.png); text-indent:-9999px; border:none; cursor:pointer; } .logo:hover { opacity:0.9; } .signin{ width:69px; height:30px; background:url(images/signin.png); text-indent:-9999px; border:none; cursor:pointer; } .signin:hover { opacity:0.9; } .register{ width:79px; height:30px; background:url(images/register.png); text-indent:-9999px; border:none; cursor:pointer; } .register:hover { opacity:0.9; } .contact_Us{ width:53px; height:9px; background:url(images/Contact_Us.png); text-indent:-9999px; border:none; cursor:pointer; } .contact_Us:hover { opacity:0.9; } .code_of_Conduct{ width:84px; height:9px; background:url(images/Code_of_Conduct.png); text-indent:-9999px; border:none; cursor:pointer; } .code_of_Conduct:hover { opacity:0.9; } .privacy_policy{ width:65px; height:12px; background:url(images/Privacy_Policy.png); text-indent:-9999px; border:none; cursor:pointer; } .privacy_policy:hover { opacity:0.9; } .copyright{ width:148px; height:13px; background:url(images/Copyright.png); text-indent:-9999px; border:none; cursor:pointer; } .copyright:hover { opacity:0.9; } .slideshow{ width:301px; height:151px; background: url(slideshow.png), url(minecraft.png), url(tf2.png), url(CSS.png), url(GM.png), url(aos.png), url(CSGO.png), url(voip.png), text-indent:-9999px; border:none; cursor:pointer; } .slideshow:hover { opacity:0.9; } Div version source: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <script type="text/javascript"> //<![CDATA[ window.__CF=window.__CF||{};window.__CF.AJS={"vig_key":{"sid":"c6d1454039dd49b1c8400bbfdf74df7a"},"trumpet":{"message":"XodusEN is undergoing background maintenance, that will provide performance & graphical improvements to our system, but will not hinder your experience across our services."},"ga_key":{"ua":"UA-35779435-1","ga_bs":"2"},"exprmntly":{"service_id":"7967"},"cdnjs":{"__h":"1","cdnjs":"MO,GF,FX,CS,JS"},"abetterbrowser":{"ie":"10"}}; //]]> </script> <script type="text/javascript"> //<![CDATA[ try{if (!window.CloudFlare) { var CloudFlare=[{verbose:0,p:0,byc:0,owlid:"cf",mirage:{responsive:0,lazy:0},oracle:0,paths:{cloudflare:"/cdn-cgi/nexp/aav=1870252173/"},atok:"d6e39f49946fcb6d690f0d10d5a963f3",zone:"xodusen.com",rocket:"a",apps:{"vig_key":{"sid":"c6d1454039dd49b1c8400bbfdf74df7a"},"trumpet":{"message":"XodusEN is undergoing background maintenance, that will provide performance & graphical improvements to our system, but will not hinder your experience across our services."},"ga_key":{"ua":"UA-35779435-1","ga_bs":"2"},"exprmntly":{"service_id":"7967"},"cdnjs":{"__h":"1","cdnjs":"MO,GF,FX,CS,JS"},"abetterbrowser":{"ie":"10"}}}];document.write('<script type="text/javascript" src="//ajax.cloudflare.com/cdn-cgi/nexp/aav=4114775854/cloudflare.min.js"><'+'\/script>')}}catch(e){}; //]]> </script> <script type="text/javascript" src="//ajax.cloudflare.com/cdn-cgi/nexp/aav=1566821048/appsh.min.js"></script><script type="text/javascript">__CF.AJS.inith();</script><link rel="icon" type="image/png" href="http://www.xodusen.com/resources/images/favicon.png"> <title>Welcome to XodusEN</title> <meta name="description" content="This is the homepage of XodusEN. Xodus Entertainment Network is a unique & friendly Gaming Community that welcomes & realises the potential, and value within any user regardless of their origin. "> <meta name="keywords" content="XeN, Xodus, XEN, xen, Xodus Entertainment Network, gaming, community, PC, Steam, XBL, Xbox 360, PSN, Playstation, games, Gaming, Community, XodusEN, Gaming Network, Network, TF2, Server, CS:S, Minecraft, premium, servers, Counter-Strike: Source, Website, Homepage, Minecraftia"> <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/> <link href="style.css" rel="stylesheet" type="text/css"> <script type="text/rocketscript" data-rocketsrc="https://ajax.googleapis.com/ajax/libs/jquery/1.8.0/jquery.min.js"></script> <script type="text/rocketscript" data-rocketsrc="http://cloud.github.com/downloads/malsup/cycle/jquery.cycle.all.latest.js"></script> <script type="text/rocketscript"> $(document).ready(function() { $('.slideshow').cycle({ fx: 'fade' // choose your transition type, ex: fade, scrollUp, shuffle, etc... }); }); </script> <!--[if IE]> <script type="text/javascript"> window.location = "http://www.xodusen.com/ie/"; </script> <![endif]--> <script type="text/javascript"> /* <![CDATA[ */ var _gaq = _gaq || []; _gaq.push(['_setAccount', 'UA-35779435-1']); _gaq.push(['_trackPageview']); (function() { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s); })(); (function(b){(function(a){"__CF"in b&&"DJS"in b.__CF?b.__CF.DJS.push(a):"addEventListener"in b?b.addEventListener("load",a,!1):b.attachEvent("onload",a)})(function(){"FB"in b&&"Event"in FB&&"subscribe"in FB.Event&&(FB.Event.subscribe("edge.create",function(a){_gaq.push(["_trackSocial","facebook","like",a])}),FB.Event.subscribe("edge.remove",function(a){_gaq.push(["_trackSocial","facebook","unlike",a])}),FB.Event.subscribe("message.send",function(a){_gaq.push(["_trackSocial","facebook","send",a])}));"twttr"in b&&"events"in twttr&&"bind"in twttr.events&&twttr.events.bind("tweet",function(a){if(a){var b;if(a.target&&a.target.nodeName=="IFRAME")a:{if(a=a.target.src){a=a.split("#")[0].match(/[^?=&]+=([^&]*)?/g);b=0;for(var c;c=a[b];++b)if(c.indexOf("url")===0){b=unescape(c.split("=")[1]);break a}}b=void 0}_gaq.push(["_trackSocial","twitter","tweet",b])}})})})(window); /* ]]> */ </script> <meta name="pinterest" content="nopin"/></head> <body style="background-color:#d7d7d7;"><script type="text/javascript"> //<![CDATA[ try{(function(a){var b="http://",c="www.xodusen.com",d="/cdn-cgi/cl/",e="618e40fe1e01787d9cb9aa2f8abc52caf8a32796.gif",f=new a;f.src=[b,c,d,e].join("")})(Image)}catch(e){} //]]> </script> <div id="Table_01"> <div id="index-01_"> <img id="index_01" src="images/index_01.png" width="1020" height="9" alt=""/> </div> <div id="index-02_"> <img id="index_02" src="images/index_02.png" width="826" height="305" alt=""/> </div> <div id="Signin_"> <a href="http://s.xodusen.com/VrtqYm"> <img id="Signin" class="signin" src="images/Signin.png" width="69" height="30" border="0" alt=""/></a> </div> <div id="index-04_"> <img id="index_04" src="images/index_04.png" width="3" height="643" alt=""/> </div> <div id="Register_"> <a href="http://s.xodusen.com/WW3rpZ"> <img id="Register" class="register" src="images/Register.png" width="79" height="30" alt=""/></a> </div> <div id="index-06_"> <img id="index_06" src="images/index_06.png" width="43" height="643" alt=""/> </div> <div id="index-07_"> <img id="index_07" src="images/index_07.png" width="69" height="613" alt=""/> </div> <div id="index-08_"> <img id="index_08" src="images/index_08.png" width="79" height="613" alt=""/> </div> <div id="index-09_"> <img id="index_09" src="images/index_09.png" width="360" height="338" alt=""/> </div> <div id="Logo_"> <a href="http://s.xodusen.com/WW3rpZ"> <img class="logo" src="images/Logo.png" width="301" height="151" alt=""></a> </div> <div id="index-11_"> <img id="index_11" src="images/index_11.png" width="165" height="338" alt=""/> </div> <div id="index-12_"> <img id="index_12" src="images/index_12.png" width="301" height="187" alt=""/> </div> <div id="index-13_"> <img id="index_13" src="images/index_13.png" width="27" height="548" alt=""/> </div> <div id="Slideshow_" class="slideshow"> <a href="http://www.xodusen.com/community"> <img src="images/slideshow.png" width="960" height="305" alt=""></a> <a href="http://www.xodusen.com/mcurl"> <img src="images/minecraft.png" width="960" height="305" alt=""></a> <a href="steam://connect/74.121.188.194:27015"> <img src="images/tf2.png" width="960" height="305" alt=""></a> <a href="steam://connect/74.121.188.195:27015"> <img src="images/CSS.png" width="960" height="305" alt=""></a> <a href="steam://connect/74.121.188.197:27015"> <img src="images/GM.png" width="960" height="305" alt=""></a> <a href="aos://3267131722:32887"> <img src="images/aos.png" width="960" height="305" alt=""></a> <a href="steam://connect/74.121.188.196:27015"> <img src="images/CSGO.png" width="960" height="305" alt=""></a> </div> <div id="index-15_"> <img id="index_15" src="images/index_15.png" width="33" height="548" alt=""/> </div> <div id="index-16_"> <img id="index_16" src="images/index_16.png" width="960" height="155" alt=""/> </div> <div id="index-17_"> <img id="index_17" src="images/index_17.png" width="39" height="88" alt=""/> </div> <div id="Copyright_"> <a href="http://www.xodusen.com/community"> <img id="Copyright" src="images/Copyright.png" width="148" height="13" alt=""></a> </div> <div id="index-19_"> <img id="index_19" src="images/index_19.png" width="773" height="5" alt=""/> </div> <div id="index-20_"> <img id="index_20" src="images/index_20.png" width="526" height="83" alt=""/> </div> <div id="Privacy-Policy_"> <a href="http://s.xodusen.com/VhGEkH"> <img id="Privacy_Policy" src="images/Privacy_Policy.png" width="68" height="23" alt=""></a> </div> <div id="index-22_"> <img id="index_22" src="images/index_22.png" width="6" height="83" alt=""/> </div> <div id="Code-of-Conduct_"> <a href="http://s.xodusen.com/Tf5Gz7"> <img id="Code_of_Conduct" src="images/Code_of_Conduct.png" width="84" height="23" alt=""></a> </div> <div id="index-24_"> <img id="index_24" src="images/index_24.png" width="2" height="83" alt=""/> </div> <div id="Contact-Us_"> <a href="http://s.xodusen.com/T5EYsG"> <img id="Contact_Us" src="images/Contact_Us.png" width="57" height="23" alt=""></a> </div> <div id="index-26_"> <img id="index_26" src="images/index_26.png" width="30" height="83" alt=""/> </div> <div id="index-27_"> <img id="index_27" src="images/index_27.png" width="148" height="75" alt=""/> </div> <div id="index-28_"> <img id="index_28" src="images/index_28.png" width="68" height="60" alt=""/> </div> <div id="index-29_"> <img id="index_29" src="images/index_29.png" width="84" height="60" alt=""/> </div> <div id="index-30_"> <img id="index_30" src="images/index_30.png" width="57" height="60" alt=""/> </div> </div> <script type="text/javascript" src="//ajax.cloudflare.com/cdn-cgi/nexp/aav=4188748942/apps1.min.js"></script><script type="text/javascript">__CF.AJS.init1();</script></body> </html> My issue is, how can I achieve the same 'centered' results in the div format of the website, as the table format of the website? I have done some research to no avail, so I'd thought given the reputation of this site, that i'd post my issue here. Thank you in advance, ~ drea.

    Read the article

  • MOSS Upload Size?

    - by littlegeek
    Hi In MOSS we have done all of this to increase the file upload size, reset iis but still doesnt want to play = anyone any advice. UPDATE Just seen the Scott Gu article - http://weblogs.asp.net/pscott/archive/2009/02/26/404-errors-with-fileupload-with-iis7.aspx and JS example http://msmvps.com/blogs/cgross/archive/2009/02/25/large-files-in-sbs-2008-s-companyweb.aspx So need to say this is II6 on win2k3 Update 2 still not working at a loss anyone help? In SharePoint 3.0 Central Adminisration, Application Management tab, and Web application general settings configure the Maximum upload size to a maximum of 2047 MB. - We set ours to 250MB In Internet Information Services on the properties of the virtual server increase the Connection Timeout to greater than default 120 seconds depending on the time to upload large files in your environment for example, 360 seconds. - We set ours to 600 Secs Configure the web.config for the _layouts web.config with On the SharePoint server change C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\LAYOUTS\web.config with an executionTimeout appropriate for the file size you are uploading. An example is included below. from: to: executionTimeout="999999" maxRequestLength="2097151" /

    Read the article

  • Can't get FTP to work on centOS 5.6

    - by josi
    Hi guys I have been trying for a few hours to install and get FTP to work... I did yum install ftp and yum install vsftpd They all installed and are running but when I try to use filezilla or some other client I just can't connect....I've tried connecting on port 21 and port 990 ....nothing! These are my iptables # Firewall configuration written by system-config-securitylevel # Manual customization of this file is not recommended. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :RH-Firewall-1-INPUT - [0:0] -A INPUT -j RH-Firewall-1-INPUT -A FORWARD -j RH-Firewall-1-INPUT -A RH-Firewall-1-INPUT -i lo -j ACCEPT -A RH-Firewall-1-INPUT -p icmp --icmp-type any -j ACCEPT -A RH-Firewall-1-INPUT -p 50 -j ACCEPT -A RH-Firewall-1-INPUT -p 51 -j ACCEPT -A RH-Firewall-1-INPUT -p esp -j ACCEPT -A RH-Firewall-1-INPUT -p ah -j ACCEPT -A RH-Firewall-1-INPUT -d 224.0.0.251 -p udp -m udp --dport 5353 -j ACCEPT -A RH-Firewall-1-INPUT -p udp -m udp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m tcp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 443 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 21 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 25 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 53 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 110 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 990 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 443 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 465 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 646 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 993 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 995 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 3306 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 10009 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 7778 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 5000 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 25566 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 8765 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 8192 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 8123 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 20 -j ACCEPT -A RH-Firewall-1-INPUT -p udp -m state --state NEW -m udp --dport 23877 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 9091 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 51413 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 10011 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 30033 -j ACCEPT -A RH-Firewall-1-INPUT -p udp --dport 5353 -d 224.0.0.251 -j ACCEPT -A RH-Firewall-1-INPUT -p udp -m udp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m tcp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited COMMIT Any help would be much appreciated! If I do lsof -i :21 without the "." it shows nothing. [root@ks3000420 ~]# lsof -i :21 . COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME bash 9964 root cwd DIR 8,1 4096 483329 . bash 11608 root cwd DIR 8,1 4096 483329 . bash 13550 root cwd DIR 8,1 4096 483329 . vi 14117 root cwd DIR 8,1 4096 483329 . sftp-serv 15261 root cwd DIR 8,1 4096 483329 . sftp-serv 15477 root cwd DIR 8,1 4096 483329 . bash 19074 root cwd DIR 8,1 4096 483329 . lsof 19100 root cwd DIR 8,1 4096 483329 . lsof 19101 root cwd DIR 8,1 4096 483329 .

    Read the article

  • If record exists in database, UPDATE a single column

    - by Doug
    I have a bulk uploading object in place that is being used to bulk upload roughly 25-40 image files at a time. Each image is about 100-150 kb in size. During the upload, I've created a for each loop that takes the file name of the image (minus the file extension) to write it into a column named "sku". Also, for each file being uploaded, the date is recorded to a column named DateUpdated, as well as some image path data. Here is my c# code: protected void graphicMultiFileButton_Click(object sender, EventArgs e) { //graphicMultiFile is the ID of the bulk uploading object ( provided by Dean Brettle: http://www.brettle.com/neatupload ) if (graphicMultiFile.Files.Length > 0) { foreach (UploadedFile file in graphicMultiFile.Files) { //strip ".jpg" from file name (will be assigned as SKU) string sku = file.FileName.Substring(0, file.FileName.Length - 4); //assign the directory where the images will be stored on the server string directoryPath = Server.MapPath("~/images/graphicsLib/" + file.FileName); //ensure that if image existes on server that it will get overwritten next time it's uploaded: file.MoveTo(directoryPath, MoveToOptions.Overwrite); //current sql that inserts a record to the db SqlCommand comm; SqlConnection conn; string connectionString = ConfigurationManager.ConnectionStrings["DataConnect"].ConnectionString; conn = new SqlConnection(connectionString); comm = new SqlCommand("INSERT INTO GraphicsLibrary (sku, imagePath, DateUpdated) VALUES (@sku, @imagePath, @DateUpdated)", conn); comm.Parameters.Add("@sku", System.Data.SqlDbType.VarChar, 50); comm.Parameters["@sku"].Value = sku; comm.Parameters.Add("@imagePath", System.Data.SqlDbType.VarChar, 300); comm.Parameters["@imagePath"].Value = "images/graphicsLib/" + file.FileName; comm.Parameters.Add("@DateUpdated", System.Data.SqlDbType.DateTime); comm.Parameters["@DateUpdated"].Value = DateTime.Now; conn.Open(); comm.ExecuteNonQuery(); conn.Close(); } } } After images are uploaded, managers will go back and re-upload images that have previously been uploaded. This is because these product images are always being revised and improved. For each new/improved image, the file name and extension will remain the same - so that when image 321-54321.jpg was first uploaded to the server, the new/improved version of that image will still have the image file name as 321-54321.jpg. I can't say for sure if the file sizes will remain in the 100-150KB range. I'll assume that the image file size will grow eventually. When images get uploaded (again), there of course will be an existing record in the database for that image. What is the best way to: Check the database for the existing record (stored procedure or SqlDataReader or create a DataSet ...?) Then if record exists, simply UPDATE that record so that the DateUpdated column gets today's date. If no record exists, do the INSERT of the record as normal. Things to consider: If the record exists, we'll let the actual image be uploaded. It will simply overwrite the existing image so that the new version gets displayed on the web. We're using SQL Server 2000 on hosted environment (DiscountAsp). I'm programming in C#. The uploading process will be used by about 2 managers a few times a month (each) - which to me is not a allot of usage. Although I'm a jr. developer, I'm guessing that a stored procedure would be the way to go. Just seems more efficient - to do this record check away from the for each loop... but not sure. I'd need extra help writing a sproc, since I don't have too much experience with them. Thank everyone...

    Read the article

  • Simple animation using C#/Windows Forms

    - by clintp
    I need to knock out a quick animation in C#/Windows Forms for a Halloween display. Just some 2D shapes moving about on a solid background. Since this is just a quick one-off project I really don't want to install and learn an entire new set of tools for this. (DirectX dev kits, Silverlight, Flash, etc..) I also have to install this on multiple computers so anything beyond the basic .Net framework (2.0) would be a pain in the arse. For tools I've got VS2k8, 25 years of development experience, a wheelbarrow, holocaust cloak, and about 2 days to knock this out. I haven't done animation since using assembler on my Atari 130XE (hooray for page flipping and player/missile graphics!) Advice? Here's some of the things I'd like to know: I can draw on any empty widget (like a panel) by fiddling with it's OnPaint handler, right? That's how I'd draw a custom widget. Is there a better technique than this? Is there a page-flipping technique for this kind of thing in Windows Forms? I'm not looking for a high frame rate, just as little flicker/drawing as necessary. Thanks. Post Mortem Edit ... "a couple of coding days later" Well, the project is done. The links below came in handy although a couple of them were 404. (I wish SO would allow more than one reply to be marked "correct"). The biggest problem I had to overcome was flickering, and a persistent bug when I tried to draw on the form directly. Using the OnPaint event for the Form: bad idea. I never got that to work; lots of mysterious errors (stack overflows, or ArgumentNullExceptions). I wound up using a panel sized to fill the form and that worked fine. Using the OnPaint method is slow anyway. Somewhere online I read that building the PaintEventArgs was slow, and they weren't kidding. Lots of flickering went away when I abandoned this. Skip the OnPaint/Invalidate() and just paint it yourself. Setting all of the "double buffering" options on the form still left some flicker that had to be fixed. (And I found conflicting docs that said "set them on the control" and "set them on the form". Well controls don't have a .SetStyle() method.) I haven't tested without them, so they might be doing something (this is the form): this.SetStyle(ControlStyles.UserPaint, true); this.SetStyle(ControlStyles.OptimizedDoubleBuffer, true); this.SetStyle(ControlStyles.AllPaintingInWmPaint, true); So the workhorse of the code wound up looking like (pf is the panel control): void PaintPlayField() { Bitmap bufl = new Bitmap(pf.Width, pf.Height); using (Graphics g = Graphics.FromImage(bufl)) { g.FillRectangle(Brushes.Black, new Rectangle(0, 0, pf.Width, pf.Height)); DrawItems(g); DrawMoreItems(g); pf.CreateGraphics().DrawImageUnscaled(bufl, 0, 0); } } And I just called PaintPlayField from the inside of my Timer loop. No flicker at all.

    Read the article

  • How to remove buttons in AnythingSlider and stop the sliding?

    - by user244394
    I'm currently using the anythingSlider it works quite well. But if there is one li, how do i make it stop sliding and remove the buttons displayed below? The *li*s are generated from the database so sometimes there's only one. I want the buttons to show only when there is more then one image. if there is one image all the buttons( back, forward, pause) should not be displayed. Does anybody know of a way of stopping it sliding if there's only one li and removing the buttons when there is only one image. ===================================================================================== Thank You. Currently I have the working version, posted below the old code is working. I tried to replace it with yours it didnt seem to work. Is there something else that needs to be added? function formatText(index, panel) { return index + ""; } $(function () { $('.anythingSlider').anythingSlider({ easing: "easeInOutExpo", // Anything other than "linear" or "swing" requires the easing plugin autoPlay: true, // This turns off the entire FUNCTIONALY, not just if it starts running or not. delay: 7500, // How long between slide transitions in AutoPlay mode startStopped: false, // If autoPlay is on, this can force it to start stopped animationTime: 1250, // How long the slide transition takes hashTags: true, // Should links change the hashtag in the URL? buildNavigation: true, // If true, builds and list of anchor links to link to each slide pauseOnHover: true, // If true, and autoPlay is enabled, the show will pause on hover startText: "", // Start text stopText: "", // Start text navigationFormatter: formatText // Details at the top of the file on this use (advanced use) }); $("#slide-jump").click(function(){ $('.anythingSlider').anythingSlider(6); }); }); UPDATED WITH YOUR CODE : function formatText(index, panel) { return index + ""; } $(function () { var singleSlide = true, options = { autoPlay: false, // This turns off the entire FUNCTIONALY, not just if it starts running or not. buildNavigation: false, // If true, builds and list of anchor links to link to each slide easing: "easeInOutExpo", // Anything other than "linear" or "swing" requires the easing plugin delay: 3000, // How long between slide transitions in AutoPlay mode animationTime: 600, // How long the slide transition takes hashTags: true, // Should links change the hashtag in the URL? pauseOnHover: true, // If true, and autoPlay is enabled, the show will pause on hover navigationFormatter: formatText // Details at the top of the file on this use (advanced use) }; // Add player options if more than one slide exists if ( $('.anythingSlider div ul li').length 1 ) { $.extend(options, { autoPlay: true, startStopped: false, // If autoPlay is on, this can force it to start stopped startText: "", // Start text stopText: "", // Start text buildNavigation: true }); singleSlide = false; } // Initiate anythingSlider $("#slide-jump").click(function(){ $('.anythingSlider').anythingSlider(6); }); // hide anythingSlider navigation arrows if (singleSlide) { $('.anythingSlider a.arrow').hide(); } }); HTML TAGS ========================================================================================= Update May 25 ,2010 When using $('.anythingSlider').anythingSlider(options); instead of $('.anythingSlider').anythingSlider(6); the slider runs but I noticed that I get a Javascript Error :Object required is there anything else I need to pass? Since before anythingSlider was taking 6 instead of options, where do I pass that 6, since its looking for it.

    Read the article

  • MySQL is hogging my server resources

    - by Reacen
    Does anyone have any idea of what can cause this weird behaviour and how I go about fixing it? This is all coming from MySQL only (both RAM and CPU usage), for about 10 minutes after I reboot my Java game server (that has a pool of 256 connections). There are not that many queries and I think it may be more of a MySQL misconfiguration problem. My server: 3.20 GHz * 6 core / 24 GB RAM / 64 bit Windows Server 2003. My game server: Java server, with 256 MySQL connections pool (MyISAM engine), about 500,000 accounts, and 9 million rows of game items in database and about 3,000 players are connected. After about 15 minutes of the game server reboot, the server resumes its stability and CPU usage drop down to 1% ~ 5% and memory to 6 GB. Here is a copy of my MySQL configuration. Also, any advice about my MySQL configuration will be appreciated. I really set it up almost at random. # Example MySQL config file for very large systems. # # This is for a large system with memory of 1G-2G where the system runs mainly # MySQL. # # You can copy this file to # /etc/my.cnf to set global options, # mysql-data-dir/my.cnf to set server-specific options (in this # installation this directory is C:\mysql\data) or # ~/.my.cnf to set user-specific options. # # In this file, you can use all long options that a program supports. # If you want to know which options a program supports, run the program # with the "--help" option. # The following options will be passed to all MySQL clients [client] #password = your_password port = 3306 socket = /tmp/mysql.sock # Here follows entries for some specific programs # The MySQL server [mysqld] #log=c:\mysql.log port = 3306 socket = /tmp/mysql.sock skip-locking key_buffer_size = 2572M max_allowed_packet = 64M table_open_cache = 512 sort_buffer_size = 128M read_buffer_size = 128M read_rnd_buffer_size = 128M myisam_sort_buffer_size = 500M thread_cache_size = 32 query_cache_size = 1948M # Try number of CPU's*2 for thread_concurrency thread_concurrency = 12 max_connections = 5000 # Don't listen on a TCP/IP port at all. This can be a security enhancement, # if all processes that need to connect to mysqld run on the same host. # All interaction with mysqld must be made via Unix sockets or named pipes. # Note that using this option without enabling named pipes on Windows # (via the "enable-named-pipe" option) will render mysqld useless! # #skip-networking # Replication Master Server (default) # binary logging is required for replication log-bin=mysql-bin # required unique id between 1 and 2^32 - 1 # defaults to 1 if master-host is not set # but will not function as a master if omitted server-id = 1 # Replication Slave (comment out master section to use this) # # To configure this host as a replication slave, you can choose between # two methods : # # 1) Use the CHANGE MASTER TO command (fully described in our manual) - # the syntax is: # # CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>, # MASTER_USER=<user>, MASTER_PASSWORD=<password> ; # # where you replace <host>, <user>, <password> by quoted strings and # <port> by the master's port number (3306 by default). # # Example: # # CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306, # MASTER_USER='joe', MASTER_PASSWORD='secret'; # # OR # # 2) Set the variables below. However, in case you choose this method, then # start replication for the first time (even unsuccessfully, for example # if you mistyped the password in master-password and the slave fails to # connect), the slave will create a master.info file, and any later # change in this file to the variables' values below will be ignored and # overridden by the content of the master.info file, unless you shutdown # the slave server, delete master.info and restart the slaver server. # For that reason, you may want to leave the lines below untouched # (commented) and instead use CHANGE MASTER TO (see above) # # required unique id between 2 and 2^32 - 1 # (and different from the master) # defaults to 2 if master-host is set # but will not function as a slave if omitted #server-id = 2 # # The replication master for this slave - required #master-host = <hostname> # # The username the slave will use for authentication when connecting # to the master - required #master-user = <username> # # The password the slave will authenticate with when connecting to # the master - required #master-password = <password> # # The port the master is listening on. # optional - defaults to 3306 #master-port = <port> # # binary logging - not required for slaves, but recommended #log-bin=mysql-bin # # binary logging format - mixed recommended #binlog_format=mixed # Point the following paths to different dedicated disks #tmpdir = /tmp/ #log-update = /path-to-dedicated-directory/hostname # Uncomment the following if you are using InnoDB tables #innodb_data_home_dir = C:\mysql\data/ #innodb_data_file_path = ibdata1:2000M;ibdata2:10M:autoextend #innodb_log_group_home_dir = C:\mysql\data/ # You can set .._buffer_pool_size up to 50 - 80 % # of RAM but beware of setting memory usage too high #innodb_buffer_pool_size = 384M #innodb_additional_mem_pool_size = 20M # Set .._log_file_size to 25 % of buffer pool size #innodb_log_file_size = 100M #innodb_log_buffer_size = 8M #innodb_flush_log_at_trx_commit = 1 #innodb_lock_wait_timeout = 50 [mysqldump] quick max_allowed_packet = 64M [mysql] no-auto-rehash # Remove the next comment character if you are not familiar with SQL #safe-updates [myisamchk] key_buffer_size = 256M sort_buffer_size = 256M read_buffer = 8M write_buffer = 8M [mysqlhotcopy] interactive-timeout

    Read the article

  • Apache2 Segfault - need help interpreting this coredump (suspect cause is memcache / php session related)

    - by WayneDV
    Three Apache2 web servers running a PHP 5.2.3 web site. We're using Memcache to cache rendered pages but also as the storage engine of the PHP Sessions. At peak traffic times we're getting Apache segmentation faults on all three web servers and all HTTPD child processes segfault. My gut tells me that the increased Memcache traffic is stopping PHP sessions from being created or cleaned up and thus the processes die. Is it possible for someone to confirm that from the following? : #0 _zend_mm_free_int (heap=0x7fb67a075820, p=0x7fb67a011538) at /usr/src/debug/php-5.3.3/Zend/zend_alloc.c:2018 #1 0x00007fb665d02e82 in mmc_buffer_free (request=0x7fb67a011548) at /usr/src/debug/php-pecl-memcache-3.0.4/memcache-3.0.4/memcache_pool.c:50 #2 mmc_request_free (request=0x7fb67a011548) at /usr/src/debug/php-pecl-memcache-3.0.4/memcache-3.0.4/memcache_pool.c:169 #3 0x00007fb665d031ea in mmc_pool_free (pool=0x7fb67a00e458) at /usr/src/debug/php-pecl-memcache-3.0.4/memcache-3.0.4/memcache_pool.c:917 #4 0x00007fb665d0a2f1 in ps_close_memcache (mod_data=0x7fb66d625440) at /usr/src/debug/php-pecl-memcache-3.0.4/memcache-3.0.4/memcache_session.c:185 #5 0x00007fb66d1b0935 in php_session_save_current_state () at /usr/src/debug/php-5.3.3/ext/session/session.c:625 #6 php_session_flush () at /usr/src/debug/php-5.3.3/ext/session/session.c:1517 #7 0x00007fb66d1b0c1b in zm_deactivate_session (type=<value optimized out>, module_number=<value optimized out>) at /usr/src/debug/php-5.3.3/ext/session/session.c:2171 #8 0x00007fb66d2a719c in module_registry_cleanup (module=<value optimized out>) at /usr/src/debug/php-5.3.3/Zend/zend_API.c:2150 #9 0x00007fb66d2b1994 in zend_hash_reverse_apply (ht=0x7fb66d629d60, apply_func=0x7fb66d2a7180 <module_registry_cleanup>) at /usr/src/debug/php-5.3.3/Zend/zend_hash.c:755 #10 0x00007fb66d2a5c0d in zend_deactivate_modules () at /usr/src/debug/php-5.3.3/Zend/zend.c:866 #11 0x00007fb66d2541b5 in php_request_shutdown (dummy=<value optimized out>) at /usr/src/debug/php-5.3.3/main/main.c:1607 #12 0x00007fb66d32e037 in php_apache_request_dtor (r=0x7fb67a229658) at /usr/src/debug/php-5.3.3/sapi/apache2handler/sapi_apache2.c:509 #13 php_handler (r=0x7fb67a229658) at /usr/src/debug/php-5.3.3/sapi/apache2handler/sapi_apache2.c:681 #14 0x00007fb6784166f0 in ap_run_handler (r=0x7fb67a229658) at /usr/src/debug/httpd-2.2.15/server/config.c:158 #15 0x00007fb678419f58 in ap_invoke_handler (r=0x7fb67a229658) at /usr/src/debug/httpd-2.2.15/server/config.c:372 #16 0x00007fb6784254f0 in ap_process_request (r=0x7fb67a229658) at /usr/src/debug/httpd-2.2.15/modules/http/http_request.c:282 #17 0x00007fb678422418 in ap_process_http_connection (c=0x7fb67a2193a8) at /usr/src/debug/httpd-2.2.15/modules/http/http_core.c:190 #18 0x00007fb67841e1b8 in ap_run_process_connection (c=0x7fb67a2193a8) at /usr/src/debug/httpd-2.2.15/server/connection.c:43 #19 0x00007fb678429f4b in child_main (child_num_arg=<value optimized out>) at /usr/src/debug/httpd-2.2.15/server/mpm/prefork/prefork.c:662 #20 0x00007fb67842a21a in make_child (s=0x7fb679cd7860, slot=153) at /usr/src/debug/httpd-2.2.15/server/mpm/prefork/prefork.c:758 #21 0x00007fb67842aea4 in perform_idle_server_maintenance (_pconf=<value optimized out>, plog=<value optimized out>, s=<value optimized out>) at /usr/src/debug/httpd-2.2.15/server/mpm/prefork/prefork.c:893 #22 ap_mpm_run (_pconf=<value optimized out>, plog=<value optimized out>, s=<value optimized out>) at /usr/src/debug/httpd-2.2.15/server/mpm/prefork/prefork.c:1097 #23 0x00007fb678402890 in main (argc=1, argv=0x7fff6fecacb8) at /usr/src/debug/httpd-2.2.15/server/main.c:740 PHP.INI Follows: [PHP] engine = On short_open_tag = On asp_tags = Off precision = 14 y2k_compliance = On output_buffering = 4096 zlib.output_compression = Off implicit_flush = Off unserialize_callback_func = serialize_precision = 100 allow_call_time_pass_reference = Off safe_mode = Off safe_mode_gid = Off safe_mode_include_dir = safe_mode_exec_dir = safe_mode_allowed_env_vars = PHP_ safe_mode_protected_env_vars = LD_LIBRARY_PATH disable_functions = disable_classes = expose_php = On max_execution_time = 30 max_input_time = 60 memory_limit = 128M error_reporting = E_ALL & ~E_DEPRECATED display_errors = Off display_startup_errors = Off log_errors = Off log_errors_max_len = 1024 ignore_repeated_errors = Off ignore_repeated_source = Off report_memleaks = On track_errors = Off html_errors = Off variables_order = "GPCS" request_order = "GP" register_globals = Off register_long_arrays = Off register_argc_argv = Off auto_globals_jit = On post_max_size = 8M magic_quotes_gpc = Off magic_quotes_runtime = Off magic_quotes_sybase = Off auto_prepend_file = auto_append_file = default_mimetype = "text/html" doc_root = user_dir = enable_dl = Off file_uploads = On upload_max_filesize = 2M allow_url_fopen = On allow_url_include = Off default_socket_timeout = 60 [Date] [filter] [iconv] [intl] [sqlite] [sqlite3] [Pcre] [Pdo] [Phar] [Syslog] define_syslog_variables = Off [mail function] SMTP = localhost smtp_port = 25 sendmail_path = /usr/sbin/sendmail -t -i mail.add_x_header = On [SQL] sql.safe_mode = Off [ODBC] odbc.allow_persistent = On odbc.check_persistent = On odbc.max_persistent = -1 odbc.max_links = -1 odbc.defaultlrl = 4096 odbc.defaultbinmode = 1 [MySQL] mysql.allow_persistent = On mysql.max_persistent = -1 mysql.max_links = -1 mysql.default_port = mysql.default_socket = mysql.default_host = mysql.default_user = mysql.default_password = mysql.connect_timeout = 60 mysql.trace_mode = Off [MySQLi] mysqli.max_links = -1 mysqli.default_port = 3306 mysqli.default_socket = mysqli.default_host = mysqli.default_user = mysqli.default_pw = mysqli.reconnect = Off [PostgresSQL] pgsql.allow_persistent = On pgsql.auto_reset_persistent = Off pgsql.max_persistent = -1 pgsql.max_links = -1 pgsql.ignore_notice = 0 pgsql.log_notice = 0 [Sybase-CT] sybct.allow_persistent = On sybct.max_persistent = -1 sybct.max_links = -1 sybct.min_server_severity = 10 sybct.min_client_severity = 10 [bcmath] bcmath.scale = 0 [browscap] [Session] session.save_handler = files session.save_path = "/var/lib/php/session" session.use_cookies = 1 session.use_only_cookies = 1 session.name = PHPSESSID session.auto_start = 1 session.cookie_lifetime = 0 session.cookie_path = / session.cookie_domain = session.cookie_httponly = session.serialize_handler = php session.gc_probability = 1 session.gc_divisor = 1000 session.gc_maxlifetime = 1440 session.bug_compat_42 = Off session.bug_compat_warn = Off session.referer_check = session.entropy_length = 0 session.entropy_file = session.cache_limiter = nocache session.cache_expire = 180 session.use_trans_sid = 0 session.hash_function = 0 session.hash_bits_per_character = 5 url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" [MSSQL] mssql.allow_persistent = On mssql.max_persistent = -1 mssql.max_links = -1 mssql.min_error_severity = 10 mssql.min_message_severity = 10 mssql.compatability_mode = Off mssql.secure_connection = Off [Assertion] [COM] [mbstring] [gd] [exif] [Tidy] tidy.clean_output = Off [soap] soap.wsdl_cache_enabled=1 soap.wsdl_cache_dir="/tmp" soap.wsdl_cache_ttl=86400 /etc/php.d/memcached.ini : session.save_path="tcp://memcache1:11211?persistent=1&weight=1&timeout=3&retry_interval=15"

    Read the article

  • Why does my macbook pro have long ping times over wifi?

    - by randynov
    I have been having problems connecting with my wifi. It is weird, the ping times to the router (<30 feet away) seem to surge, often getting over 10s before slowly coming back down. You can see the trend below. I'm on a macbook pro and have done the normal stuff (reset the pram and smc, changed wireless channels, etc.). It happens across different routers, so I think it must be my laptop, but I don't know what it could be. The RSSI value hovers around -57, but I've seen the transmit rate flip between 0, 48 & 54. The signal strength is ~60% with 9% noise. Currently, there are 17 other wireless networks in range, but only one in the same channel. 1 - How can I figure out what's going on? 2 - How can I correct the situation? TIA! Randall PING 192.168.1.1 (192.168.1.1): 56 data bytes 64 bytes from 192.168.1.1: icmp_seq=0 ttl=254 time=781.107 ms 64 bytes from 192.168.1.1: icmp_seq=1 ttl=254 time=681.551 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=254 time=610.001 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=254 time=544.915 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=254 time=547.622 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=254 time=468.914 ms 64 bytes from 192.168.1.1: icmp_seq=6 ttl=254 time=237.368 ms 64 bytes from 192.168.1.1: icmp_seq=7 ttl=254 time=229.902 ms 64 bytes from 192.168.1.1: icmp_seq=8 ttl=254 time=11754.151 ms 64 bytes from 192.168.1.1: icmp_seq=9 ttl=254 time=10753.943 ms 64 bytes from 192.168.1.1: icmp_seq=10 ttl=254 time=9754.428 ms 64 bytes from 192.168.1.1: icmp_seq=11 ttl=254 time=8754.199 ms 64 bytes from 192.168.1.1: icmp_seq=12 ttl=254 time=7754.138 ms 64 bytes from 192.168.1.1: icmp_seq=13 ttl=254 time=6754.159 ms 64 bytes from 192.168.1.1: icmp_seq=14 ttl=254 time=5753.991 ms 64 bytes from 192.168.1.1: icmp_seq=15 ttl=254 time=4754.068 ms 64 bytes from 192.168.1.1: icmp_seq=16 ttl=254 time=3753.930 ms 64 bytes from 192.168.1.1: icmp_seq=17 ttl=254 time=2753.768 ms 64 bytes from 192.168.1.1: icmp_seq=18 ttl=254 time=1753.866 ms 64 bytes from 192.168.1.1: icmp_seq=19 ttl=254 time=753.592 ms 64 bytes from 192.168.1.1: icmp_seq=20 ttl=254 time=517.315 ms 64 bytes from 192.168.1.1: icmp_seq=37 ttl=254 time=1.315 ms 64 bytes from 192.168.1.1: icmp_seq=38 ttl=254 time=1.035 ms 64 bytes from 192.168.1.1: icmp_seq=39 ttl=254 time=4.597 ms 64 bytes from 192.168.1.1: icmp_seq=21 ttl=254 time=18010.681 ms 64 bytes from 192.168.1.1: icmp_seq=22 ttl=254 time=17010.449 ms 64 bytes from 192.168.1.1: icmp_seq=23 ttl=254 time=16010.430 ms 64 bytes from 192.168.1.1: icmp_seq=24 ttl=254 time=15010.540 ms 64 bytes from 192.168.1.1: icmp_seq=25 ttl=254 time=14010.450 ms 64 bytes from 192.168.1.1: icmp_seq=26 ttl=254 time=13010.175 ms 64 bytes from 192.168.1.1: icmp_seq=27 ttl=254 time=12010.282 ms 64 bytes from 192.168.1.1: icmp_seq=28 ttl=254 time=11010.265 ms 64 bytes from 192.168.1.1: icmp_seq=29 ttl=254 time=10010.285 ms 64 bytes from 192.168.1.1: icmp_seq=30 ttl=254 time=9010.235 ms 64 bytes from 192.168.1.1: icmp_seq=31 ttl=254 time=8010.399 ms 64 bytes from 192.168.1.1: icmp_seq=32 ttl=254 time=7010.144 ms 64 bytes from 192.168.1.1: icmp_seq=33 ttl=254 time=6010.113 ms 64 bytes from 192.168.1.1: icmp_seq=34 ttl=254 time=5010.025 ms 64 bytes from 192.168.1.1: icmp_seq=35 ttl=254 time=4009.966 ms 64 bytes from 192.168.1.1: icmp_seq=36 ttl=254 time=3009.825 ms 64 bytes from 192.168.1.1: icmp_seq=40 ttl=254 time=16000.676 ms 64 bytes from 192.168.1.1: icmp_seq=41 ttl=254 time=15000.477 ms 64 bytes from 192.168.1.1: icmp_seq=42 ttl=254 time=14000.388 ms 64 bytes from 192.168.1.1: icmp_seq=43 ttl=254 time=13000.549 ms 64 bytes from 192.168.1.1: icmp_seq=44 ttl=254 time=12000.469 ms 64 bytes from 192.168.1.1: icmp_seq=45 ttl=254 time=11000.332 ms 64 bytes from 192.168.1.1: icmp_seq=46 ttl=254 time=10000.339 ms 64 bytes from 192.168.1.1: icmp_seq=47 ttl=254 time=9000.338 ms 64 bytes from 192.168.1.1: icmp_seq=48 ttl=254 time=8000.198 ms 64 bytes from 192.168.1.1: icmp_seq=49 ttl=254 time=7000.388 ms 64 bytes from 192.168.1.1: icmp_seq=50 ttl=254 time=6000.217 ms 64 bytes from 192.168.1.1: icmp_seq=51 ttl=254 time=5000.084 ms 64 bytes from 192.168.1.1: icmp_seq=52 ttl=254 time=3999.920 ms 64 bytes from 192.168.1.1: icmp_seq=53 ttl=254 time=3000.010 ms 64 bytes from 192.168.1.1: icmp_seq=54 ttl=254 time=1999.832 ms 64 bytes from 192.168.1.1: icmp_seq=55 ttl=254 time=1000.072 ms 64 bytes from 192.168.1.1: icmp_seq=58 ttl=254 time=1.125 ms 64 bytes from 192.168.1.1: icmp_seq=59 ttl=254 time=1.070 ms 64 bytes from 192.168.1.1: icmp_seq=60 ttl=254 time=2.515 ms

    Read the article

  • iPhone SDK 3.0 and symbolicatecrash not getting along?

    - by Steve
    * UPDATE * I've reinstalled with Snow Leopard, clean install. Completely wiped my existing Leopard install. Same problem persists. I've tried numbers of versions of symbolicatecrash to resolve symbols in my crash reports. From the version provided by Apple, to Alan's Quatermain's version posted on GitHub and finally from http://openradar.appspot.com/6438643. For whatever reason, the best results I can get is for symbols on my own libraries to get resolved. Normally, this is enough data to point me in the right direction -- other times it is not. With 2.x I had no problems getting the symbols for my code + Apple provided libraries from within the stack traces in each thread. Most likely an issue with my environment here, I'm not at all doubting the work that Apple or Alan have done. Yes I'm certain the dSYM I have stashed away is the same exact one that's generating the crash report. Although 'Foo' is me, and getting symbols from it is wonderful, I need to see symbols from the other functions in the stack to truly understand my reports. Note: For devices that crash running the app on iPhone OS 2.2.1, I have no problem getting all symbols. This is an iPhone OS 3.0 issue it appears. Also, while running symbolicatecrash in verbose mode here's a few of the things that struck me as wrong: - NO MATCH NOT searching in Spotlight for dsym with UUID of /System/Library/Frameworks/CoreFoundation.framework/CoreFoundation ## Warning: Can't find any unstripped binary that matches version of /System/Library/Frameworks/CoreFoundation.framework/CoreFoundation ..........fetching symbol file for libobjc.A.dylib--[undef] Searching [/Developer/Platforms/iPhoneOS.platform/DeviceSupport/2.0 (5A345)/Symbols/usr/lib/libobjc.A.dylib /Developer/Platforms/iPhoneOS.platform/DeviceSupport/2.0 (5A347)/Symbols/usr/lib/libobjc.A.dylib /Developer/Platforms/iPhoneOS.platform/DeviceSupport/2.0.1 (5B108)/Symbols/usr/lib/libobjc.A.dylib /Developer/Platforms/iPhoneOS.platform/DeviceSupport/2.0.2 (5C1)/Symbols/usr/lib/libobjc.A.dylib /Developer/Platforms/iPhoneOS.platform/DeviceSupport/2.1.1/Symbols/usr/lib/libobjc.A.dylib /Developer/Platforms/iPhoneOS.platform/DeviceSupport/2.1/Symbols/usr/lib/libobjc.A.dylib /Developer/Platforms/iPhoneOS.platform/DeviceSupport/2.2.1/Symbols/usr/lib/libobjc.A.dylib /Developer/Platforms/iPhoneOS.platform/DeviceSupport/2.2/Symbols/usr/lib/libobjc.A.dylib /Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.0 (7A341)/Symbols/usr/lib/libobjc.A.dylib]...--[/Developer/Platforms/iPhoneOS.platform/DeviceSupport/2.0 (5A345)/Symbols/usr/lib/libobjc.A.dylib] -- NO MATCH --[/Developer/Platforms/iPhoneOS.platform/DeviceSupport/2.0 (5A347)/Symbols/usr/lib/libobjc.A.dylib] -- NO MATCH --[/Developer/Platforms/iPhoneOS.platform/DeviceSupport/2.0.1 (5B108)/Symbols/usr/lib/libobjc.A.dylib] -- NO MATCH --[/Developer/Platforms/iPhoneOS.platform/DeviceSupport/2.0.2 (5C1)/Symbols/usr/lib/libobjc.A.dylib] -- NO MATCH --[/Developer/Platforms/iPhoneOS.platform/DeviceSupport/2.1.1/Symbols/usr/lib/libobjc.A.dylib] -- NO MATCH --[/Developer/Platforms/iPhoneOS.platform/DeviceSupport/2.1/Symbols/usr/lib/libobjc.A.dylib] -- NO MATCH --[/Developer/Platforms/iPhoneOS.platform/DeviceSupport/2.2.1/Symbols/usr/lib/libobjc.A.dylib] -- NO MATCH --[/Developer/Platforms/iPhoneOS.platform/DeviceSupport/2.2/Symbols/usr/lib/libobjc.A.dylib] -- NO MATCH --[/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.0 (7A341)/Symbols/usr/lib/libobjc.A.dylib] -- NO MATCH NOT searching in Spotlight for dsym with UUID of /usr/lib/libobjc.A.dylib ## Warning: Can't find any unstripped binary that matches version of /usr/lib/libobjc.A.dylib Here's an example of the crash report after running it through symbolicatecrash: Thread 0 Crashed: 0 libSystem.B.dylib 0x31dc476c 0x31d46000 + 517996 1 libSystem.B.dylib 0x31dc4755 0x31d46000 + 517973 2 Foo 0x00053075 uncaught_exception_handler + 21 3 CoreFoundation 0x3028f65f 0x301fd000 + 599647 4 libobjc.A.dylib 0x30013693 0x3000c000 + 30355 5 libstdc++.6.dylib 0x374ccc2d 0x3748a000 + 273453 6 libstdc++.6.dylib 0x374ccc81 0x3748a000 + 273537 7 libstdc++.6.dylib 0x374ccd4d 0x3748a000 + 273741 8 libobjc.A.dylib 0x300135ff 0x3000c000 + 30207 9 CoreFoundation 0x30222f2d 0x301fd000 + 155437 10 CoreFoundation 0x30222ecb 0x301fd000 + 155339 11 Foundation 0x30521e33 0x30501000 + 134707 12 Foundation 0x30570d47 0x30501000 + 458055 13 Foo 0x0000a1db -[Bar barfoo] (Bar.m:1617) 14 Foo 0x00032f73 -[MyViewController foobar] (MyViewController.m:727) 15 Foo 0x000329b9 -[MyViewController foobar] (MyViewController.m:666) 16 Foo 0x00031fab -[MyViewController tabBar:tabSelected:] (MyViewController.m:440) 17 Foo 0x00068d41 -[TTTabBar setSelectedTabIndex:] (TTTabBar.m:160) 18 Foo 0x00068ca3 -[TTTabBar setSelectedTabView:] (TTTabBar.m:142) 19 Foo 0x000689cf -[TTTabBar tabTouchedUp:] (TTTabBar.m:83) 20 CoreFoundation 0x302552f9 0x301fd000 + 361209 21 UIKit 0x3094d101 0x308ed000 + 393473 22 UIKit 0x3094d0a1 0x308ed000 + 393377 23 UIKit 0x3094d073 0x308ed000 + 393331 24 UIKit 0x3094cdcd 0x308ed000 + 392653 25 UIKit 0x309779c1 0x308ed000 + 567745 26 UIKit 0x30977011 0x308ed000 + 565265 27 UIKit 0x309767d9 0x308ed000 + 563161 28 UIKit 0x30923613 0x308ed000 + 222739 29 UIKit 0x30923163 0x308ed000 + 221539 30 GraphicsServices 0x32045a4d 0x32041000 + 19021 31 CoreFoundation 0x30253041 0x301fd000 + 352321 32 CoreFoundation 0x30252771 0x301fd000 + 350065 33 GraphicsServices 0x32044b0f 0x32041000 + 15119 34 GraphicsServices 0x32044bbb 0x32041000 + 15291 35 UIKit 0x308f0363 0x308ed000 + 13155 36 UIKit 0x308ef121 0x308ed000 + 8481 37 Foo 0x00002097 main (main.m:13)

    Read the article

  • Flex 4, chart, Error 1009

    - by Stephane
    Hello, I am new to flex development and I am stuck with this error TypeError: Error #1009: Cannot access a property or method of a null object reference. at mx.charts.series::LineSeries/findDataPoints()[E:\dev\4.0.0\frameworks\projects\datavisualization\src\mx\charts\series\LineSeries.as:1460] at mx.charts.chartClasses::ChartBase/findDataPoints()[E:\dev\4.0.0\frameworks\projects\datavisualization\src\mx\charts\chartClasses\ChartBase.as:2202] at mx.charts.chartClasses::ChartBase/mouseMoveHandler()[E:\dev\4.0.0\frameworks\projects\datavisualization\src\mx\charts\chartClasses\ChartBase.as:4882] I try to create a chart where I can move the points with the mouse I notice that the error doesn't occur if I move the point very slowly I have try to use the debugger and pint some debug every where without success All the behaviours were ok until I had the modifyData Please let me know if you have some experience with this kind of error I will appreciate any help. Is it also possible to remove the error throwing because after that the error occur if I click the dismiss all error button then the component work great there is the simple code of the chart <fx:Declarations> </fx:Declarations> <fx:Script> <![CDATA[ import mx.charts.HitData; import mx.charts.events.ChartEvent; import mx.charts.events.ChartItemEvent; import mx.collections.ArrayCollection; [Bindable] private var selectItem:Object; [Bindable] private var chartMouseY:int; [Bindable] private var hitData:Boolean=false; [Bindable] private var profitPeriods:ArrayCollection = new ArrayCollection( [ { period: "Qtr1 2006", profit: 32 }, { period: "Qtr2 2006", profit: 47 }, { period: "Qtr3 2006", profit: 62 }, { period: "Qtr4 2006", profit: 35 }, { period: "Qtr1 2007", profit: 25 }, { period: "Qtr2 2007", profit: 55 } ]); public function chartMouseUp(e:MouseEvent):void{ if(hitData){ hitData = false; } } private function chartMouseMove(e:MouseEvent):void { if(hitData){ var p:Point = new Point(linechart.mouseX,linechart.mouseY); var d:Array = linechart.localToData(p); chartMouseY=d[1]; modifyData(); } } public function modifyData():void { var idx:int = profitPeriods.getItemIndex(selectItem); var item:Object = profitPeriods.getItemAt(idx); item.profit = chartMouseY; profitPeriods.setItemAt(item,idx); } public function chartMouseDown(e:MouseEvent):void{ if(!hitData){ var hda:Array = linechart.findDataPoints(e.currentTarget.mouseX, e.currentTarget.mouseY); if (hda[0]) { selectItem = hda[0].item; hitData = true; } } } ]]> </fx:Script> <s:layout> <s:HorizontalLayout horizontalAlign="center" verticalAlign="middle" /> </s:layout> <s:Panel title="LineChart Control" > <s:VGroup > <s:HGroup> <mx:LineChart id="linechart" color="0x323232" height="500" width="377" mouseDown="chartMouseDown(event)" mouseMove="chartMouseMove(event)" mouseUp="chartMouseUp(event)" showDataTips="true" dataProvider="{profitPeriods}" > <mx:horizontalAxis> <mx:CategoryAxis categoryField="period"/> </mx:horizontalAxis> <mx:series> <mx:LineSeries yField="profit" form="segment" displayName="Profit"/> </mx:series> </mx:LineChart> <mx:Legend dataProvider="{linechart}" color="0x323232"/> </s:HGroup> <mx:Form> <mx:TextArea id="DEBUG" height="200" width="300"/> </mx:Form> </s:VGroup> </s:Panel> UPDATE 30/2010 : the null object is _renderData.filteredCache from the chartline the code call before error is the default mouseMoveHandler of chartBase to chartline. Is it possible to remove it ? or provide a filteredCache

    Read the article

  • Act on click of a button on the Nav Bar for moreNavigationController -- Can't pushviewcontroller

    - by Jann
    Okay, here is my issue: My app has a display of categories in the tab bar at the bottom of the iPhoneOS screen. This only allows 5 categories before it presents the MORE button. I have over 25 (please do not answer this by saying: "Rethink your application...etc" -- that was rudely said before. They are food, drink, etc categories and cannot be changed). I want to allow the user to put their favorites on the home page. The Apple moreNavigationController editing system only allows 20 tab bar items to be rearranged due to space constraints on the editing page. This is not enough so i need to implement my own Editing screen. I set the rightBarButtonItem to nil and created my own. Using NSLog, i can see the "click" happens when clicking the EDIT button, but I cannot push using pushViewController. Nothing happens. I think it has something to do with the navigationController I am addressing...but i am not sure. ps: This all happens in my App Delegate which DOES act as both UITabBarControllerDelegate & UINavigationControllerDelegate. I tried to do the following: - ( void )navigationController:( UINavigationController * )navigationController_local willShowViewController:( UIViewController * )viewController_local animated:( BOOL )animated { UIViewController * currentController = navigationController_local.visibleViewController; UIViewController * nextController = viewController_local; // Do whatever here. NSLog(@"Nav contoller willShowViewController fired\n'%@'\n'%@'\nThere are currently: %d views on the stack\n",currentController,nextController,[self.navigationController.viewControllers count]); if ( [nextController isKindOfClass:NSClassFromString(@"UIMoreListController")]) { UINavigationBar *morenavbar = navigationController_local.navigationBar; UINavigationItem *morenavitem = morenavbar.topItem; morenavitem.rightBarButtonItem = nil; NSLog(@"Is a UIMoreListController\n"); UIBarButtonItem *editTabBarButton = [[UIBarButtonItem alloc] initWithTitle:@"Edit" style:UIBarButtonItemStylePlain target:self action:@selector(editTabBar:)]; morenavitem.rightBarButtonItem = editTabBarButton; [editTabBarButton release]; } } This works to place an EDIT button at the top right of the screen -- mimicking Apple's look and feel... but when that button is clicked, you cannot exit the darn moreNavigationController. I have tried many things. UIAlerts work, etc...but pushing (or popping -- even popping to root view) a view controller on the stack does not. - (void) editTabBar:(id)sender { NSLog(@"clicked edit tabbar\n"); NSLog(@"Total count of controllers: %d\n",[self.navigationController.viewControllers count]); TabBarViewController *tabBarViewController2 = [[TabBarViewController alloc] initWithNibName:@"TabBarView" bundle:nil]; tabBarViewController2.navigationItem.title=@"Edit Tab Bar"; [self.navigationController pushViewController:tabBarViewController2 animated:YES]; [tabBarViewController2 release]; NSLog(@"finished edit tabbar\n"); } If you click the edit button on the moreNavigationController's display page, you get the log entries like expected AND (this is strange) the views on the stack climbs -- but no page change occurs. I marked it down to not using the correct navigation controller...but I am lost on how to find which one TO use. this is a weird one too. In the edit function if i just do this: - (void) editTabBar:(id)sender { self.tabBarController.selectedIndex = 0; } It DOES take me home (to tabbarcontroller 0) BUT doing this: - (void) editTabBar:(id)sender { [self.navigationController popToRootViewControllerAnimated:YES]; } does not work. Does the moreNavigationController have some special quality that screws with the rest of the system?

    Read the article

  • RAILS : authlogic authenication / session error , "session contains objects whose class definition i

    - by Surya
    Session contains objects whose class definition isn\'t available. Remember to require the classes for all objects kept in the session I am trying to integrate http://github.com/binarylogic/authlogic for authentication into my rails application . I follwed all the steps into mentioned in the documentation . Now i seem to be getting this error when i hit a controller . Looks like i am missing something obvious . stacktrace /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:77:in `stale_session_check!' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:61:in `load!' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:28:in `[]' /Library/Ruby/Gems/1.8/gems/authlogic-2.1.3/lib/authlogic/session/session.rb:48:in `session_credentials' /Library/Ruby/Gems/1.8/gems/authlogic-2.1.3/lib/authlogic/session/session.rb:33:in `persist_by_session' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:178:in `send' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:178:in `evaluate_method' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:166:in `call' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:93:in `run' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:92:in `each' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:92:in `send' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:92:in `run' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:276:in `run_callbacks' /Library/Ruby/Gems/1.8/gems/authlogic-2.1.3/lib/authlogic/session/callbacks.rb:79:in `persist' /Library/Ruby/Gems/1.8/gems/authlogic-2.1.3/lib/authlogic/session/persistence.rb:55:in `persisting?' /Library/Ruby/Gems/1.8/gems/authlogic-2.1.3/lib/authlogic/session/persistence.rb:39:in `find' /Users/suryagaddipati/myprojects/groceryplanner/app/controllers/application_controller.rb:12:in `current_user_session' /Users/suryagaddipati/myprojects/groceryplanner/app/controllers/application_controller.rb:17:in `current_user' /Users/suryagaddipati/myprojects/groceryplanner/app/controllers/application_controller.rb:30:in `require_no_user' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:178:in `send' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:178:in `evaluate_method' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:166:in `call' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/filters.rb:225:in `call' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/filters.rb:629:in `run_before_filters' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/filters.rb:615:in `call_filters' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/filters.rb:610:in `perform_action_without_benchmark' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/benchmarking.rb:68:in `perform_action_without_rescue' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/core_ext/benchmark.rb:17:in `ms' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/core_ext/benchmark.rb:10:in `realtime' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/core_ext/benchmark.rb:17:in `ms' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/benchmarking.rb:68:in `perform_action_without_rescue' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/rescue.rb:160:in `perform_action_without_flash' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/flash.rb:146:in `perform_action' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:532:in `send' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:532:in `process_without_filters' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/filters.rb:606:in `process' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:391:in `process' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:386:in `call' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/routing/route_set.rb:437:in `call' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:87:in `dispatch' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:121:in `_call' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:130:in `build_middleware_stack' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/query_cache.rb:29:in `call' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/query_cache.rb:29:in `call' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/query_cache.rb:34:in `cache' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/query_cache.rb:9:in `cache' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/query_cache.rb:28:in `call' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:361:in `call' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/string_coercion.rb:25:in `call' /Users/suryagaddipati/.gem/ruby/1.8/gems/rack-1.0.1/lib/rack/head.rb:9:in `call'

    Read the article

  • error LNK2019 for ZLib sample compare.

    - by Nano HE
    Hello. I created win32 console application in vs2010 (without select the option of precompiled header). And I inserted the code below. but *.obj link failed. Could you provide me more information about the error. I searched MSDN, but still can't understand it. #include <stdio.h> #include "zlib.h" // Demonstration of zlib utility functions unsigned long file_size(char *filename) { FILE *pFile = fopen(filename, "rb"); fseek (pFile, 0, SEEK_END); unsigned long size = ftell(pFile); fclose (pFile); return size; } int decompress_one_file(char *infilename, char *outfilename) { gzFile infile = gzopen(infilename, "rb"); FILE *outfile = fopen(outfilename, "wb"); if (!infile || !outfile) return -1; char buffer[128]; int num_read = 0; while ((num_read = gzread(infile, buffer, sizeof(buffer))) > 0) { fwrite(buffer, 1, num_read, outfile); } gzclose(infile); fclose(outfile); } int compress_one_file(char *infilename, char *outfilename) { FILE *infile = fopen(infilename, "rb"); gzFile outfile = gzopen(outfilename, "wb"); if (!infile || !outfile) return -1; char inbuffer[128]; int num_read = 0; unsigned long total_read = 0, total_wrote = 0; while ((num_read = fread(inbuffer, 1, sizeof(inbuffer), infile)) > 0) { total_read += num_read; gzwrite(outfile, inbuffer, num_read); } fclose(infile); gzclose(outfile); printf("Read %ld bytes, Wrote %ld bytes, Compression factor %4.2f%%\n", total_read, file_size(outfilename), (1.0-file_size(outfilename)*1.0/total_read)*100.0); } int main(int argc, char **argv) { compress_one_file(argv[1],argv[2]); decompress_one_file(argv[2],argv[3]);} Output: 1>------ Build started: Project: zlibApp, Configuration: Debug Win32 ------ 1> zlibApp.cpp 1>d:\learning\cpp\cppvs2010\zlibapp\zlibapp\zlibapp.cpp(15): warning C4996: 'fopen': This function or variable may be unsafe. Consider using fopen_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details. 1> c:\program files\microsoft visual studio 10.0\vc\include\stdio.h(234) : see declaration of 'fopen' 1>d:\learning\cpp\cppvs2010\zlibapp\zlibapp\zlibapp.cpp(25): warning C4996: 'fopen': This function or variable may be unsafe. Consider using fopen_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details. 1> c:\program files\microsoft visual studio 10.0\vc\include\stdio.h(234) : see declaration of 'fopen' 1>d:\learning\cpp\cppvs2010\zlibapp\zlibapp\zlibapp.cpp(40): warning C4996: 'fopen': This function or variable may be unsafe. Consider using fopen_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details. 1> c:\program files\microsoft visual studio 10.0\vc\include\stdio.h(234) : see declaration of 'fopen' 1>d:\learning\cpp\cppvs2010\zlibapp\zlibapp\zlibapp.cpp(36): warning C4715: 'decompress_one_file' : not all control paths return a value 1>d:\learning\cpp\cppvs2010\zlibapp\zlibapp\zlibapp.cpp(57): warning C4715: 'compress_one_file' : not all control paths return a value 1>zlibApp.obj : error LNK2019: unresolved external symbol _gzclose referenced in function "int __cdecl decompress_one_file(char *,char *)" (?decompress_one_file@@YAHPAD0@Z) 1>zlibApp.obj : error LNK2019: unresolved external symbol _gzread referenced in function "int __cdecl decompress_one_file(char *,char *)" (?decompress_one_file@@YAHPAD0@Z) 1>zlibApp.obj : error LNK2019: unresolved external symbol _gzopen referenced in function "int __cdecl decompress_one_file(char *,char *)" (?decompress_one_file@@YAHPAD0@Z) 1>zlibApp.obj : error LNK2019: unresolved external symbol _gzwrite referenced in function "int __cdecl compress_one_file(char *,char *)" (?compress_one_file@@YAHPAD0@Z) 1>D:\learning\cpp\cppVS2010\zlibApp\Debug\zlibApp.exe : fatal error LNK1120: 4 unresolved externals ========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========

    Read the article

  • DRBD Not syncing between my nodes

    - by Mike Curry
    Some version info: Operating system is Ubuntu 11.10, on EC2, kernel is 3.0.0-16-virtual and the application info is: Version: 8.3.11 (api:88) GIT-hash: 0de839cee13a4160eed6037c4bddd066645e23c5 build by buildd@allspice, 2011-07-05 19:51:07 Getting some strange errors in dmesg (seen below) as well, there is no replication happening. I have made my first node primary and its showing: drbd driver loaded OK; device status: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 m:res cs ro ds p mounted fstype 0:r0 StandAlone Primary/Unknown UpToDate/DUnknown r----s ext3 my secondary node is showing: drbd driver loaded OK; device status: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 m:res cs ro ds p mounted fstype 0:r0 StandAlone Secondary/Unknown Inconsistent/DUnknown r----s Showing /proc/drbd on the master shows: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 0: cs:StandAlone ro:Primary/Unknown ds:UpToDate/DUnknown r----s ns:0 nr:0 dw:4 dr:1073 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:262135964 Showing /proc/drbd on the slave shows that there is nothing being transfered... version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 0: cs:StandAlone ro:Secondary/Unknown ds:Inconsistent/DUnknown r----s ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:262135964 Here is my config... resource r0 { protocol C; startup { wfc-timeout 15; degr-wfc-timeout 60; } net { cram-hmac-alg sha1; shared-secret "test123; } on drbd01 { device /dev/drbd0; disk /dev/xvdm; address 23.XX.XX.XX:7788; # blocked out ip meta-disk internal; } on drbd02 { device /dev/drbd0; disk /dev/xvdm; address 184.XX.XX.XX:7788; #blocked out ip meta-disk internal; } } I have run the following on the master: sudo drbdadm -- --overwrite-data-of-peer primary all There is no firewall between the systems. Here is the dmesg with some errors: [2285172.969955] drbd: initialized. Version: 8.3.11 (api:88/proto:86-96) [2285172.969960] drbd: srcversion: DA5A13F16DE6553FC7CE9B2 [2285172.969962] drbd: registered as block device major 147 [2285172.969965] drbd: minor_table @ 0xffff88000276ea00 [2285173.000952] block drbd0: Starting worker thread (from drbdsetup [1300]) [2285173.003971] block drbd0: disk( Diskless -> Attaching ) [2285173.006150] block drbd0: No usable activity log found. [2285173.006154] block drbd0: Method to ensure write ordering: flush [2285173.006158] block drbd0: max BIO size = 4096 [2285173.006165] block drbd0: drbd_bm_resize called with capacity == 524271928 [2285173.008512] block drbd0: resync bitmap: bits=65533991 words=1023969 pages=2000 [2285173.008518] block drbd0: size = 250 GB (262135964 KB) [2285173.079566] block drbd0: bitmap READ of 2000 pages took 17 jiffies [2285173.081189] block drbd0: recounting of set bits took additional 1 jiffies [2285173.081194] block drbd0: 250 GB (65533991 bits) marked out-of-sync by on disk bit-map. [2285173.081203] block drbd0: Suspended AL updates [2285173.081210] block drbd0: disk( Attaching -> UpToDate ) [2285173.081214] block drbd0: attached to UUIDs 1C1291D39584C1D1:0000000000000004:0000000000000000:0000000000000000 [2285173.095016] block drbd0: conn( StandAlone -> Unconnected ) [2285173.095046] block drbd0: Starting receiver thread (from drbd0_worker [1301]) [2285173.099297] block drbd0: receiver (re)started [2285173.099304] block drbd0: conn( Unconnected -> WFConnection ) [2285173.099330] block drbd0: bind before connect failed, err = -99 [2285173.099346] block drbd0: conn( WFConnection -> Disconnecting ) [2285173.295788] block drbd0: Discarding network configuration. [2285173.295815] block drbd0: Connection closed [2285173.295826] block drbd0: conn( Disconnecting -> StandAlone ) [2285173.295840] block drbd0: receiver terminated [2285173.295844] block drbd0: Terminating drbd0_receiver Edit: Reading some other similar issues, it was suggested to do a 'drbdadm dump all', so I figured it couldn't hurt. ubuntu@drbd01:~$ drbdadm dump all /etc/drbd.conf:19: in resource r0, on drbd01: IP 23.XX.XX.XX not found on this host. and on slave: root@drbd02:~# drbdadm dump all /etc/drbd.conf:25: in resource r0, on drbd02: IP 184.XX.XX.XX not found on this host. Strange it doesn't find its own ip, however, this is an Amazon EC2 system using an elastic IP... here are my ipconfigs for both... master: ubuntu@drbd01:~$ ifconfig eth0 Link encap:Ethernet HWaddr 22:00:0a:1c:27:11 inet addr:10.28.39.17 Bcast:10.28.39.63 Mask:255.255.255.192 inet6 addr: fe80::2000:aff:fe1c:2711/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1569 errors:0 dropped:0 overruns:0 frame:0 TX packets:1169 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:124409 (124.4 KB) TX bytes:213601 (213.6 KB) Interrupt:26 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) slave: root@drbd02:~# ifconfig eth0 Link encap:Ethernet HWaddr 12:31:3f:00:14:9d inet addr:10.160.27.107 Bcast:10.160.27.255 Mask:255.255.254.0 inet6 addr: fe80::1031:3fff:fe00:149d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:915 errors:0 dropped:0 overruns:0 frame:0 TX packets:774 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:75381 (75.3 KB) TX bytes:109673 (109.6 KB) Interrupt:26 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

    Read the article

  • SEVERE error in Eclipse Web application Startup

    - by lakshmanan
    I use tomcat. I am developing a web application using struts2, and I use eclipse as my IDE for development. I get this error Mar 7, 2010 7:38:42 PM org.apache.catalina.core.StandardContext filterStart SEVERE: Exception starting filter struts2 Unable to load bean: type:com.opensymphony.xwork2.ObjectFactory class:org.apache.struts2.spring.StrutsSpringObjectFactory - bean - jar:file:/C:/Documents%20and%20Settings/Lakshmanan/My%20Documents/My%20Dropbox/Final%20year%20project/Workspace/.metadata/.plugins/org.eclipse.wst.server.core/tmp0/wtpwebapps/projit1/WEB-INF/lib/struts2-spring-plugin-2.1.8.1.jar!/struts-plugin.xml:29:132 at com.opensymphony.xwork2.config.providers.XmlConfigurationProvider.register(XmlConfigurationProvider.java:208) at org.apache.struts2.config.StrutsXmlConfigurationProvider.register(StrutsXmlConfigurationProvider.java:101) at com.opensymphony.xwork2.config.impl.DefaultConfiguration.reload(DefaultConfiguration.java:131) at com.opensymphony.xwork2.config.ConfigurationManager.getConfiguration(ConfigurationManager.java:52) at org.apache.struts2.dispatcher.Dispatcher.init_PreloadConfiguration(Dispatcher.java:395) at org.apache.struts2.dispatcher.Dispatcher.init(Dispatcher.java:452) at org.apache.struts2.dispatcher.FilterDispatcher.init(FilterDispatcher.java:201) at org.apache.catalina.core.ApplicationFilterConfig.getFilter(ApplicationFilterConfig.java:295) at org.apache.catalina.core.ApplicationFilterConfig.setFilterDef(ApplicationFilterConfig.java:422) at org.apache.catalina.core.ApplicationFilterConfig.<init>(ApplicationFilterConfig.java:115) at org.apache.catalina.core.StandardContext.filterStart(StandardContext.java:3838) at org.apache.catalina.core.StandardContext.start(StandardContext.java:4488) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045) at org.apache.catalina.core.StandardHost.start(StandardHost.java:722) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045) at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443) at org.apache.catalina.core.StandardService.start(StandardService.java:516) at org.apache.catalina.core.StandardServer.start(StandardServer.java:710) at org.apache.catalina.startup.Catalina.start(Catalina.java:593) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:289) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:414) Caused by: java.lang.NoClassDefFoundError: com/opensymphony/xwork2/util/classloader/ReloadingClassLoader at java.lang.Class.getDeclaredConstructors0(Native Method) at java.lang.Class.privateGetDeclaredConstructors(Class.java:2389) at java.lang.Class.getDeclaredConstructors(Class.java:1836) at com.opensymphony.xwork2.config.providers.XmlConfigurationProvider.register(XmlConfigurationProvider.java:198) ... 24 more Caused by: java.lang.ClassNotFoundException: com.opensymphony.xwork2.util.classloader.ReloadingClassLoader at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1484) at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1329) ... 28 more Mar 7, 2010 7:38:42 PM org.apache.catalina.core.StandardContext start SEVERE: Error filterStart Mar 7, 2010 7:38:42 PM org.apache.catalina.core.StandardContext start SEVERE: Context [/projit1] startup failed due to previous errors Mar 7, 2010 7:38:42 PM org.apache.catalina.core.ApplicationContext log INFO: Closing Spring root WebApplicationContext Mar 7, 2010 7:38:42 PM org.springframework.context.support.AbstractApplicationContext doClose INFO: Closing Root WebApplicationContext: startup date [Sun Mar 07 19:38:41 GMT+05:30 2010]; root of context hierarchy Mar 7, 2010 7:38:42 PM org.springframework.beans.factory.support.DefaultSingletonBeanRegistry destroySingletons INFO: Destroying singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@afae4a: defining beans [personCrud,companyCrud,projectCrud,discussionCrud]; root of factory hierarchy Mar 7, 2010 7:38:42 PM org.apache.catalina.loader.WebappClassLoader clearReferencesJdbc SEVERE: A web application registered the JBDC driver [com.mysql.jdbc.Driver] but failed to unregister it when the web application was stopped. To prevent a memory leak, the JDBC Driver has been forcibly unregistered. Mar 7, 2010 7:38:42 PM org.apache.catalina.loader.WebappClassLoader clearThreadLocalMap SEVERE: A web application created a ThreadLocal with key of type [org.springframework.core.NamedThreadLocal] (value [Prototype beans currently in creation]) and a value of type [null] (value [null]) but failed to remove it when the web application was stopped. To prevent a memory leak, the ThreadLocal has been forcibly removed. Mar 7, 2010 7:38:42 PM org.apache.catalina.loader.WebappClassLoader clearThreadLocalMap SEVERE: A web application created a ThreadLocal with key of type [org.springframework.core.NamedThreadLocal] (value [XML bean definition resources currently being loaded]) and a value of type [null] (value [null]) but failed to remove it when the web application was stopped. To prevent a memory leak, the ThreadLocal has been forcibly removed. I am confused . Please help me in rectifying this error.

    Read the article

  • RAILS :"session contains objects whose class definition isn\'t available."

    - by Surya
    Session contains objects whose class definition isn\'t available. Remember to require the classes for all objects kept in the session I am trying to integrate http://github.com/binarylogic/authlogic for authentication into my rails application . I follwed all the steps into mentioned in the documentation . Now i seem to be getting this error when i hit a controller . Looks like i am missing something obvious . stacktrace /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:77:in `stale_session_check!' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:61:in `load!' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:28:in `[]' /Library/Ruby/Gems/1.8/gems/authlogic-2.1.3/lib/authlogic/session/session.rb:48:in `session_credentials' /Library/Ruby/Gems/1.8/gems/authlogic-2.1.3/lib/authlogic/session/session.rb:33:in `persist_by_session' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:178:in `send' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:178:in `evaluate_method' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:166:in `call' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:93:in `run' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:92:in `each' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:92:in `send' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:92:in `run' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:276:in `run_callbacks' /Library/Ruby/Gems/1.8/gems/authlogic-2.1.3/lib/authlogic/session/callbacks.rb:79:in `persist' /Library/Ruby/Gems/1.8/gems/authlogic-2.1.3/lib/authlogic/session/persistence.rb:55:in `persisting?' /Library/Ruby/Gems/1.8/gems/authlogic-2.1.3/lib/authlogic/session/persistence.rb:39:in `find' /Users/suryagaddipati/myprojects/groceryplanner/app/controllers/application_controller.rb:12:in `current_user_session' /Users/suryagaddipati/myprojects/groceryplanner/app/controllers/application_controller.rb:17:in `current_user' /Users/suryagaddipati/myprojects/groceryplanner/app/controllers/application_controller.rb:30:in `require_no_user' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:178:in `send' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:178:in `evaluate_method' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:166:in `call' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/filters.rb:225:in `call' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/filters.rb:629:in `run_before_filters' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/filters.rb:615:in `call_filters' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/filters.rb:610:in `perform_action_without_benchmark' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/benchmarking.rb:68:in `perform_action_without_rescue' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/core_ext/benchmark.rb:17:in `ms' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/core_ext/benchmark.rb:10:in `realtime' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/core_ext/benchmark.rb:17:in `ms' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/benchmarking.rb:68:in `perform_action_without_rescue' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/rescue.rb:160:in `perform_action_without_flash' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/flash.rb:146:in `perform_action' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:532:in `send' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:532:in `process_without_filters' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/filters.rb:606:in `process' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:391:in `process' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:386:in `call' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/routing/route_set.rb:437:in `call' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:87:in `dispatch' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:121:in `_call' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:130:in `build_middleware_stack' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/query_cache.rb:29:in `call' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/query_cache.rb:29:in `call' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/query_cache.rb:34:in `cache' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/query_cache.rb:9:in `cache' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/query_cache.rb:28:in `call' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:361:in `call' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/string_coercion.rb:25:in `call' /Users/suryagaddipati/.gem/ruby/1.8/gems/rack-1.0.1/lib/rack/head.rb:9:in `call'

    Read the article

< Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >