Search Results

Search found 5718 results on 229 pages for 'apply'.

Page 197/229 | < Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >

• SQL Server Licensing in a VMware vSphere Cluster

  - by Helvick

  If I have SQL Server 2008 instances running in virtual machines on a VMware vSphere cluster with vMotion\DRS enabled so that the VM's can (potentially) run on any one of the physical servers in the cluster what precisely are the license requirements? For example assume that I have 4 physical ESX Hosts with dual physical CPU's and 3 separate single vCPU Virtual Machines running SQL Server 2008 running in that cluster. How many SQL Standard Processor licenses would I need? Is it 3 (one per VM) or 12 (one per VM on each physical host) or something else? How many SQL Enterprise Processor licenses would I need? Is it 3 (one per VM) or 8 (one for each physical CPU in the cluster) or, again, something else? The range in the list prices for these options goes from $17k to $200k so getting it right is quite important. Bonus question: If I choose the Server+CAL licensing model do I need to buy multiple Server instance licenses for each of the ESX hosts (so 12 copies of the SQL Server Standard server license so that there are enough licenses on each host to run all VM's) or again can I just license the VM and what difference would using Enterprise per server licensing make? Edited to Add Having spent some time reading the SQL 2008 Licensing Guide (63 Pages! Includes Maps!*) I've come across this: • Under the Server/CAL model, you may run unlimited instances of SQL Server 2008 Enterprise within the server farm, and move those instances freely, as long as those instances are not running on more servers than the number of licenses assigned to the server farm. • Under the Per Processor model, you effectively count the greatest number of physical processors that may support running instances of SQL Server 2008 Enterprise at any one time across the server farm and assign that number of Processor licenses And earlier: ..For SQL Server, these rule changes apply to SQL Server 2008 Enterprise only. By my reading this means that for my 3 VM's I only need 3 SQL 2008 Enterprise Processor Licenses or one copy of Server Enterprise + CALs for the cluster. By implication it means that I have to license all processors if I choose SQL 2008 Standard Processor licensing or that I have to buy a copy of SQL Server 2008 Standard for each ESX host if I choose to use CALs. *There is a map to demonstrate that a Server Farm cannot extend across an area broader than 3 timezones unless it's in the European Free Trade Area, I wasn't expecting that when I started reading it.

  Read the article

• Unix sort keys cause performance problems

  - by KenFar

  My data: It's a 71 MB file with 1.5 million rows. It has 6 fields All six fields combine to form a unique key - so that's what I need to sort on. Sort statement: sort -t ',' -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 -k6,6 -o output.csv input.csv The problem: If I sort without keys, it takes 30 seconds. If I sort with keys, it takes 660 seconds. I need to sort with keys to keep this generic and useful for other files that have non-key fields as well. The 30 second timing is fine, but the 660 is a killer. More details using unix time: sort input.csv -o output.csv = 28 seconds sort -t ',' -k1 input.csv -o output.csv = 28 seconds sort -t ',' -k1,1 input.csv -o output.csv = 64 seconds sort -t ',' -k1,1 -k2,2 input.csv -o output.csv = 194 seconds sort -t ',' -k1,1 -k2,2 -k3,3 input.csv -o output.csv = 328 seconds sort -t ',' -k1,1 -k2,2 -k3,3 -k4,4 input.csv -o output.csv = 483 seconds sort -t ',' -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 input.csv -o output.csv = 561 seconds sort -t ',' -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 -k6,6 input.csv -o output.csv = 660 seconds I could theoretically move the temp directory to SSD, and/or split the file into 4 parts, sort them separately (in parallel) then merge the results, etc. But I'm hoping for something simpler since looks like sort is just picking a bad algorithm. Any suggestions? Testing Improvements using buffer-size: With 2 keys I got a 5% improvement with 8, 20, 24 MB and best performance of 8% improvement with 16MB, but 6% worse with 128MB With 6 keys I got a 5% improvement with 8, 20, 24 MB and best performance of 9% improvement with 16MB. Testing improvements using dictionary order (just 1 run each): sort -d --buffer-size=8M -t ',' -k1,1 -k2,2 input.csv -o output.csv = 235 seconds (21% worse) sort -d --buffer-size=8M -t ',' -k1,1 -k2,2 input.csv -o ouput.csv = 232 seconds (21% worse) conclusion: it makes sense that this would slow the process down, not useful Testing with different file system on SSD - I can't do this on this server now. Testing with code to consolidate adjacent keys: def consolidate_keys(key_fields, key_types): """ Inputs: - key_fields - a list of numbers in quotes: ['1','2','3'] - key_types - a list of types of the key_fields: ['integer','string','integer'] Outputs: - key_fields - a consolidated list: ['1,2','3'] - key_types - a list of types of the consolidated list: ['string','integer'] """ assert(len(key_fields) == len(key_types)) def get_min(val): vals = val.split(',') assert(len(vals) <= 2) return vals[0] def get_max(val): vals = val.split(',') assert(len(vals) <= 2) return vals[len(vals)-1] i = 0 while True: try: if ( (int(get_max(key_fields[i])) + 1) == int(key_fields[i+1]) and key_types[i] == key_types[i+1]): key_fields[i] = '%s,%s' % (get_min(key_fields[i]), key_fields[i+1]) key_types[i] = key_types[i] key_fields.pop(i+1) key_types.pop(i+1) continue i = i+1 except IndexError: break # last entry return key_fields, key_types While this code is just a work-around that'll only apply to cases in which I've got a contiguous set of keys - it speeds up the code by 95% in my worst case scenario.

  Read the article

• SQL 2000: Intermittent Error 7399 with OLE DB Provider for Microsoft Jet

  - by Tim Lara

  I am using SQL Server 2000 on Windows Server 2003 SP2 and have set up a linked server to point at an Access 97 database using the OLE DB Provider 4.0 for Microsoft Jet. The problem I am having sounds almost exactly like the one described in this Microsoft KB article, except that the error I am getting is intermittent: http://support.microsoft.com/kb/814398 The SQL Server is running under the Local System account (which I don't have authority to change), and the Access 97 .mdb file that the linked server points to is on a Win XP Pro machine on the same LAN as the SQL Server machine, inside of a shared folder with permissions set to "Everyone" and "Full Control". Now, if the linked server connection never worked, it would make more sense that the problem is merely a permissions issue with the Local System account as the KB article above suggests, but the maddening thing is that sometimes the connection works just fine. When it fails, the error message is always the same: Error 7399: OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. [OLE/DB provider returned message: Unspecified error] OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize::Initialize returned 0x80004005: ]. Also, not only does the linked server setup occasionally work just fine on this one particular SQL Server, what is supposed to be exactly the same setup on 25 other servers works just fine EVERY TIME! Obviously, something in the non-working setup must not be exactly the same, but I'm having trouble figuring out where to look for the differences since the error message SQL Server returns is so vague. I know our sysadmins have had numerous issues with Active Directory replication across our domain, so my best guess is that there is some sort of odd group policy corruption going on, but I thought I'd ask here to see if I might be overlooking something more straightforward. Any ideas on how to further isolate the error would be greatly appreciated! For the record, here is a list of things I've already tried: Rebooting the SQL Server machine. Fixes the issue temporarily, then the error returns within a minute or two of startup. (This is why I suspect a rogue group policy that is slow to apply fouling things up.) Importing all database objects from the Access 97 mdb into a new, clean mdb file. Makes no difference. Moving the Access 97 mdb file to a local directory on the SQL Server machine instead of accessing it via a share on the Win XP Pro LAN machine. This works, but does not solve the problem because the mdb needs to be on the client machine for performance reasons and the ability to work "stand alone". Plus, the same shared folder access works fine on all other servers / clients on my network. Compared all the SQL Server, Windows Server, etc versions to a known working setup and everything appears to be the same.

  Read the article

• SQL 2000: Intermittent Error 7399 with OLE DB Provider for Microsoft Jet

  - by Tim Lara

  I am using SQL Server 2000 on Windows Server 2003 SP2 and have set up a linked server to point at an Access 97 database using the OLE DB Provider 4.0 for Microsoft Jet. The problem I am having sounds almost exactly like the one described in this Microsoft KB article, except that the error I am getting is intermittent: http://support.microsoft.com/kb/814398 The SQL Server is running under the Local System account (which I don't have authority to change), and the Access 97 .mdb file that the linked server points to is on a Win XP Pro machine on the same LAN as the SQL Server machine, inside of a shared folder with permissions set to "Everyone" and "Full Control". Now, if the linked server connection never worked, it would make more sense that the problem is merely a permissions issue with the Local System account as the KB article above suggests, but the maddening thing is that sometimes the connection works just fine. When it fails, the error message is always the same: Error 7399: OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. [OLE/DB provider returned message: Unspecified error] OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize::Initialize returned 0x80004005: ]. Also, not only does the linked server setup occasionally work just fine on this one particular SQL Server, what is supposed to be exactly the same setup on 25 other servers works just fine EVERY TIME! Obviously, something in the non-working setup must not be exactly the same, but I'm having trouble figuring out where to look for the differences since the error message SQL Server returns is so vague. I know our sysadmins have had numerous issues with Active Directory replication across our domain, so my best guess is that there is some sort of odd group policy corruption going on, but I thought I'd ask here to see if I might be overlooking something more straightforward. Any ideas on how to further isolate the error would be greatly appreciated! For the record, here is a list of things I've already tried: Rebooting the SQL Server machine. Fixes the issue temporarily, then the error returns within a minute or two of startup. (This is why I suspect a rogue group policy that is slow to apply fouling things up.) Importing all database objects from the Access 97 mdb into a new, clean mdb file. Makes no difference. Moving the Access 97 mdb file to a local directory on the SQL Server machine instead of accessing it via a share on the Win XP Pro LAN machine. This works, but does not solve the problem because the mdb needs to be on the client machine for performance reasons and the ability to work "stand alone". Plus, the same shared folder access works fine on all other servers / clients on my network. Compared all the SQL Server, Windows Server, etc versions to a known working setup and everything appears to be the same.

  Read the article

• Import/rip/convert DVD to Adobe Premiere Pro for Mac

  - by alexyu2010

  For those who want to edit their videos, Adobe Premiere Pro will inevitably a good choice, it is a professional, real time, timeline based video editing software application that supports many video editing cards and plug-ins for accelerated processing, additional file format support and video/audio effects. Although Adobe Premiere Pro is said to be for professionals, is not so complicated that a hobbyist can't excel at using it in an hour or so. General file formats supported by Adobe Premiere Pro Up to now, Adobe Creative Suite has released several versions of Adobe Premiere Pro, including Adobe Premiere 1.0, Adobe Premiere 2.0, Adobe Premiere Pro CS3, Adobe Premiere Pro CS4 and the newly published Adobe Premiere Pro CS5. Although I saw diversity in file formats they support, I did find some common file formats supported by all of them, such as AVI, MOV, MPG. Importing DVD, Adobe Premiere Pro says "NO" It is obvious to all of us that Adobe Premiere Pro will never give DVD a hug, and it isn't rare to see that many people are really confused when they want to import their DVDs to Adobe Premiere Pro for editing. What to do? Yes, you may have noticed that, there is only a way out, that is ripping your DVDs to some formats workable with Adobe Premiere Pro natively, and this is what DVD to Adobe Premiere Pro can do. Importing DVD to Adobe Premiere Pro on Mac DVD to Adobe Premiere Pro converter for Mac is the specially designed application for ripping/converting DVD movies, DVD VOB files or DVD clips to Adobe Premiere Pro compatible AVI, MOV, MPG files with either DVD ripping tool and video converting tool within the versatile DVD to Adobe Premiere Pro converter who is a powerful program for dealing with DVD and videos perfectly. Mac DVD to Adobe Premiere Pro converter can work with a wide variety of files including DVD, VOB, AVI, WMV, MPG, MOV, MP4, DV, FLV, MKV, ASF, SWF, HD video for using with other editing tools like iMovie, FCP etc, play on QuickTime, iTunes, put on portable devices like iPod, iPhone, iPad, iRiver, BlackBerry, Gphone, Mobile Phone or upload to webistes such as YouTube, MySpace. DVD to Adobe Premiere Pro converter for Mac can also help you do some basic editing. You can trim, crop your DVD movie or DVD clip, apply special effect to make it more artistic, merge several DVD clips to a single one or tweak the output parameters for video and audio separately to get a better quality rendering. Besides, to get a good common of the process the preview widnows is also available for you.

  Read the article

• multiple webapps in tomcat -- what is the optimal architecture?

  - by rvdb

  I am maintaining a growing base of mainly Cocoon-2.1-based web applications [http://cocoon.apache.org/2.1/], deployed in a Tomcat servlet container [http://tomcat.apache.org/], and proxied with an Apache http server [http://httpd.apache.org/docs/2.2/]. I am conceptually struggling with the best way to deploy multiple web applications in Tomcat. Since I'm not a Java programmer and we don't have any sysadmin staff I have to figure out myself what is the most sensible way to do this. My setup has evolved through 2 scenarios and I'm considering a third for maximal separation of the distinct webapps. [1] 1 Tomcat instance, 1 Cocoon instance, multiple webapps -tomcat |_ webapps |_ webapp1 |_ webapp2 |_ webapp[n] |_ WEB-INF (with Cocoon libs) This was my first approach: just drop all web applications inside a single Cocoon webapps folder inside a single Tomcat container. This seemed to run fine, I did not encounter any memory issues. However, this poses a maintainability drawback, as some Cocoon components are subject to updates, which often affect the webapp coding. Hence, updating Cocoon becomes unwieldy: since all webapps share the same pool of Cocoon components, updating one of them would require the code in all web applications to be updated simultaneously. In order to isolate the web applications, I moved to the second scenario. [2] 1 Tomcat instance, each webapp in its dedicated Cocoon environment -tomcat |_ webapps |_ webapp1 | |_ WEB-INF (with Cocoon libs) |_ webapp1 | |_ WEB-INF (with Cocoon libs) |_ webapp[n] |_ WEB-INF (with Cocoon libs) This approach separates all webapps into their own Cocoon environment, run inside a single Tomcat container. In theory, this works fine: all webapps can be updated independently. However, this soon results in PermGenSpace errors. It seemed that I could manage the problem by increasing memory allocation for Tomcat, but I realise this isn't a structural solution, and that overloading a single Tomcat in this way is prone to future memory errors. This set me thinking about the third scenario. [3] multiple Tomcat instances, each with a single webapp in its dedicated Cocoon environment -tomcat |_ webapps |_ webapp1 |_ WEB-INF (with Cocoon libs) -tomcat |_ webapps |_ webapp2 |_ WEB-INF (with Cocoon libs) -tomcat |_ webapps |_ webapp[n] |_ WEB-INF (with Cocoon libs) I haven't tried this approach, but am thinking of the $CATALINA_BASE variable. A single Tomcat distribution can be multiply instanciated with different $CATALINA_BASE environments, each pointing to a Cocoon instance with its own webapp. I wonder whether such an approach could avoid the structural memory-related problems of approach [2], or will the same issues apply? On the other hand, this approach would complicate management of the Apache http frontend, as it will require the AJP connectors of the different Tomcat instances to be listening at different ports. Hence, Apache's worker configuration has to be updated and reloaded whenever a new webapp (in its own Tomcat instance) is added. And there seems no way to reload worker.properties without restarting the entire Apache http server. Is there perhaps another / more dynamic way of 'modularizing' multiple Tomcat-served webapps, or can one of these scenarios be refined? Any thoughts, suggestions, advice much appreciated. Ron

  Read the article

• uploading via http post (multipart/form-data) silently fails with big files

  - by matteo

  When uploading multipart/form-data forms via a http post request to my apache web server, very big files (i.e. 30MB) are silently discarded. On the server side all looks as if the attached file was received with 0 bytes size. On the client side all looks like it had been uploaded succesfully (it takes the expected long time to upload and the browser gives no error message). On the server, nothing is logged into the error log. An entry is logged into the access log as if everything was ok (a post request and a 200 ok response). These uploads are being posted to a php script. In the php script, If I print_r $_FILES, I see the following information for the relevant file: [file5] => Array ( [name] => MOV023.3gp [type] => video/3gpp [tmp_name] => /tmp/phpgOdvYQ [error] => 0 [size] => 0 ) Note both [error] = 0 (which should mean no error) and [size] = 0 (as if the file was empty). My php script runs fine and receives all the rest of the data except these files. move_uploaded_file succeeds on these files and actually copies them as 0byte files. I've already changed the php directives max_upload_size to 50M and post_max_size to 200M, so neither the single file nor the request exceed any size limit. max_execution_time is not relevant, because the time to transfer the data does not count; and I've increased max_input_time to 1000 seconds, though this shouldn't be necessary since this is the time taken to parse the input data, not the time taken to upload it. Is there any apache configuration, prior to php, that could be causing these files to be discarded even prior to php execution? Some limit in size or in upload time? I've read about a default 300 seconds timeout limit, but this should apply to the time the connection is idle, not the time it takes while actually transferring data, right? Needless to say, uploads with all exactly identical conditions (including file format, client and everything) except smaller file size, work seamlessly, so the issue is clearly related to the file or request size, or to the time it takes to send it.

  Read the article

• Why is user asked to choose their workgroup?

  - by Clinton Blackmore

  We running Mac OS X Server 10.5.8 with Mac OS X 10.5.8 clients. Students use network logins to, well, log in. I've been asked to deny internet access to a specific user. I was told that a good way to do it is to create a user workgroup called "No Internet Access" and manage settings there. (Specifically, I told parental controls to allow access to no sites, and blacklisted all the installed web browsers). Now, when the user authenticates to log in, they are greeted with this dialog: Workgroups for <username> Grade 7 Students No Internet Access It is unlikely that the student would willing choose "No Internet Access" to be their base group. Looking in Workgroup Manager at the student's record, it shows their primary group ID is the grade 7 group, and "No Internet Access" is listed as another group they belong to. I looked at the managed preferences for all the computers pertaining to logins. They are set to their defaults. Specifically, the computer groups' preference for Logins - Access has the defaults: [unchecked] Ignore workgroup nesting [checked] Combine available workgroup settings Based on my reading of Tips and Tricks for Mac Administrators, this should be correct, the user should not be asked which group they belong to, and settings from all applicable groups should be applied. How can I achieve that result? Edit: I've decided to add some additional information from the Tips and Tricks for Mac Management White Paper (via Apple in Education, via the author's site). On page 21, it says: With Leopard MCX, workgroup preference settings are combined by default into a single set of values. This means that instead of having to choose between the Math, Science, or Language Arts workgroups when logging in, a user can just authenticate and be taken directly to the desktop. All the settings for each of those workgroups are composited together, providing you with all the Dock items and a composite of all the other settings. On page 40, an example is given in which settings are combined from different 'domains', one computer group, two (user) workgroups, and one individual user's settings. [When johnd logs into a leopard client,] the items staged in the Dock from left to right are: computer group, first workgroup alphabetically, second workgroup, user. Items within the workgroup are staged alphabetically. Nowhere is there an indication that groups are nested; indeed, I can see no sensible (non-flat) heirarchy for groups like Math, Science, and Language Arts. I strongly believe that there is a way to apply settings from two unrelated user workgroups such that a user of OS X 10.5.x or newer does not need to choose their workgroup. This is what I seek to achieve.

  Read the article

• How to block subreddits with BIND9?

  - by user1391189

  Please help me block NSFW subreddits like this one (http://www.reddit.com/r/NSFW/) I would like to keep access to SFW subreddits, but block certain subreddits that are distracting or NSFW. I know how to filter domains. (see files below) But how do I apply the filter only to certain subreddits? So far I have set up the following files: blocklist.conf zone "adimages.go.com" { type master; file "dummy-block"; }; zone "admonitor.net" { type master; file "dummy-block"; }; zone "ads.specificpop.com" { type master; file "dummy-block"; }; ... named.conf options { allow-query { 127.0.0.1; }; allow-recursion { 127.0.0.1; }; directory "c:\bind\etc"; notify no; }; zone "." IN { type hint; file "c:\bind\etc\named.root"; }; zone "localhost" IN { allow-update { none; }; file "c:\bind\etc\localhost.zone"; type master; }; zone "0.0.127.in-addr.arpa" IN { allow-update { none; }; file "c:\bind\etc\named.local"; type master; }; key "rndc-key" { algorithm hmac-md5; secret "O5VdbBKKEMzuLYjM60CxwuLLURFA6peDYHCBvZCqjoa6KtL1ggD7OTLeLtnu2jR5I5cwA/MQ8UdHc+9tMJRSiw=="; }; controls { inet 127.0.0.1 port 953 allow { 127.0.0.1; } keys { "rndc-key"; }; }; //Blocklist include "c:\bind\etc\blocklist.conf"; dummy-block $TTL 604800 @ IN SOA localhost. root.localhost. ( 2 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS localhost. @ IN A 127.0.0.1 * IN A 127.0.0.1

  Read the article

• Block Google requests to 16k using pf firewall

  - by atmosx

  I'd like to block access to Google search using PF after the threshold of 17500 requests (connection established) in 24h, from a host running FreeBSD 9. What I came up with, after reading pf-faq is this rule: pass out on $net proto tcp from any to 'www.google.com' port www flags S/SA keep state (max-src-conn 200, max-src-conn-rate 17500/86400) NOTE: 86400 are 24h in seconds. The rule should work, but PF is smart enough to know that www.google.com resolves in 5 different IPs. So my pfctl -sr output gives me this: pass out on vte0 inet proto tcp from any to 173.194.44.81 port = http flags S/SA keep state (source-track rule, max-src-conn 200, max-src-conn-rate 17500/86400, src.track 86400) pass out on vte0 inet proto tcp from any to 173.194.44.82 port = http flags S/SA keep state (source-track rule, max-src-conn 200, max-src-conn-rate 17500/86400, src.track 86400) pass out on vte0 inet proto tcp from any to 173.194.44.83 port = http flags S/SA keep state (source-track rule, max-src-conn 200, max-src-conn-rate 17500/86400, src.track 86400) pass out on vte0 inet proto tcp from any to 173.194.44.80 port = http flags S/SA keep state (source-track rule, max-src-conn 200, max-src-conn-rate 17500/86400, src.track 86400) pass out on vte0 inet proto tcp from any to 173.194.44.84 port = http flags S/SA keep state (source-track rule, max-src-conn 200, max-src-conn-rate 17500/86400, src.track 86400) PF creates 5 different rules, 1 for each IP that Google resolves. However I have the sense - without being 100% sure, I didn't had the chance to test it - that the number 17500/86400 applies for each IP. If that's the case - please confirm - then it's not what I want. In pf-faq there's another option called source-track-global: source-track This option enables the tracking of number of states created per source IP address. This option has two formats: + source-track rule - The maximum number of states created by this rule is limited by the rule's max-src-nodes and max-src-states options. Only state entries created by this particular rule count toward the rule's limits. + source-track global - The number of states created by all rules that use this option is limited. Each rule can specify different max-src-nodes and max-src-states options, however state entries created by any participating rule count towards each individual rule's limits. The total number of source IP addresses tracked globally can be controlled via the src-nodes runtime option. I tried to apply source-track-global in the above rule without success. How can I use this option in order to achieve my goal? Any thoughts or comments are more than welcome since I'm an amateur and don't fully understand PF yet. Thanks

  Read the article

• Issue with Netgear GS108T Managed Switch and Jumbo Frames

  - by Richie086

  I recently purchased a Netgear GS108T managed switch and I am trying to configure jumbo packets between my NAS (Thecus N4100Pro), PC and managed switch. I should mention the fact that I was able to use jumbo frames between my PC and NAS before I purchased the switch without issue. My Desktop has a wired gigabit NIC (Intel 82579V Gigabit) and has the ability to configure jumbo frames (see pic) that are either 9014 bytes or 4088 bytes. I choose 9014 bytes for the jumbo frame size My NAS supports jumbo frames as well, and is configured to use 9014 as the frame size. When I go into my Netgear managed switch and set the frame size to 9014 on the ports I am using for my PC and NAS. See image As soon as I hit apply in the web interface, I loose my connection to the SMB shares on my NAS and I can no longer connect to the web admin interface for my NAS. The really strange thing is I can ping my NAS via the ping command, but when I try to connect to the web interface on port 80 or port 443 the page never loads. I did a scan from my PC to my NAS using nmap and I can see the following ports open PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 111/tcp open rpcbind 139/tcp open netbios-ssn 443/tcp open https 445/tcp open microsoft-ds 631/tcp open ipp 2000/tcp open cisco-sccp 2049/tcp open nfs 3260/tcp open iscsi 49152/tcp open unknown MAC Address: 00:14:FD:15:00:44 (Thecus Technology) Read data files from: C:\Program Files (x86)\Nmap Nmap done: 1 IP address (1 host up) scanned in 211.97 seconds Raw packets sent: 1 (28B) | Rcvd: 1 (28B) Anyone have any idea what is going on here? Why is nmap able to detect the ports are open and listening for http, https and file sharing but I cant connect when all devices have jumbo packets enabled? Stranger still - I did a packet capture using wireshark while the nmap scan was running and filtered so I only saw converstations between my PC and my NAS. Here are the packet details from my scan Only 4 packets over 5k bytes? What is going on here? Do I not need to configure jumbo frame sizes on the switch? I have an internet connection from my pc to the switch to my router - I just cannot connect to my NAS. I just checked on my iPhone and I am able to open my NAS web admin interface without issue on my iPhone! WTF!!!!!! Let me know if you need more details..

  Read the article

• DNS and DHCP dies after ~2 days of use on ClearOS

  - by TheLQ

  I'm using ClearOS (based on CentOS, so any info specific to it should apply here) as a gateway, DHCP, and DNS server. I had this server running perfectly for a month or two before replacing it with another server. However due DNS and DHCP failing 2 days in and a host of other performance issues (the box was a little underpowered), I changed back to the origional server. However 2 days in DHCP and DNS are failing again, and I'm out of idea's on why. In both cases to my knowledge no network or server changes occurred after installation. Right after installing (and at least a day in) DNS and DHCP was working just fine. However later (Day 2) I get a call saying their internet is down (translation: Nobody can get to websites because DNS is down) I've tried to fix the problem by checking if the dnsmasq is even running (it is), restarting the service, and restarting the server to no effect. I do have two internal servers that have static DHCP leases but one's lease must of expired as I can't connect to it anymore. I'm hesitant to do any dhcp testing on the last server as I'll not be able to connect to it anymore. Is there anything anyone can think of on why DNS and DHCP would fail 2 days in to running perfectly? More info: Running dnsmasq in debug mode. This is all that's displayed even when running nslookup quackwall. I'm not sure though if nslookup commands should show up in the log [root@quackwall ~]# /usr/sbin/dnsmasq -dq dnsmasq: started, version 2.49 cachesize 150 dnsmasq: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP dnsmasq-dhcp: DHCP, IP range 10.0.0.100 -- 10.0.0.254, lease time 12h dnsmasq: reading /etc/resolv.conf dnsmasq: using nameserver 74.128.17.114#53 dnsmasq: using nameserver 74.128.19.102#53 dnsmasq: read /etc/hosts - 5 addresses dnsmasq-dhcp: read /etc/ethers - 2 addresses On the other server DNS and the Gateway are all configured correctly (10.0.0.2 is quackwall) lordquackstar@quackgame:~$ netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.0.0.0 0.0.0.0 255.255.240.0 U 0 0 0 eth0 0.0.0.0 10.0.0.2 0.0.0.0 UG 0 0 0 eth0 lordquackstar@quackgame:~$ cat /etc/resolv.conf nameserver 10.0.0.2 domain highwow.lan search highwow.lan

  Read the article

• Puppet - Possible to use software design patterns in modules?

  - by Mike Purcell

  As I work with puppet, I find myself wanting to automate more complex setups, for example vhosts for X number of websites. As my puppet manifests get more complex I find it difficult to apply the DRY (don't repeat yourself) principle. Below is a simplified snippet of what I am after, but doesn't work because puppet throws various errors depending up whether I use classes or defines. I'd like to get some feed back from some seasoned puppetmasters on how they might approach this solution. # site.pp import 'nodes' # nodes.pp node nodes_dev { $service_env = 'dev' } node nodes_prod { $service_env = 'prod' } import 'nodes/dev' import 'nodes/prod' # nodes/dev.pp node 'service1.ownij.lan' inherits nodes_dev { httpd::vhost::package::site { 'foo': } httpd::vhost::package::site { 'bar': } } # modules/vhost/package.pp class httpd::vhost::package { class manage($port) { # More complex stuff goes here like ensuring that conf paths and uris exist # As well as log files, which is I why I want to do the work once and use many notify { $service_env: } notify { $port: } } define site { case $name { 'foo': { class 'httpd::vhost::package::manage': port => 20000 } } 'bar': { class 'httpd::vhost::package::manage': port => 20001 } } } } } That code snippet gives me a Duplicate declaration: Class[Httpd::Vhost::Package::Manage] error, and if I switch the manage class to a define, and attempt to access a global or pass in a variable common to both foo and bar, I get a Duplicate declaration: Notify[dev] error. Any suggestions how I can implement the DRY principle and still get puppet to work? -- UPDATE -- I'm still having a problem trying to ensure that some of my vhosts, which may share a parent directory, are setup correctly. Something like this: node 'service1.ownij.lan' inherits nodes_dev { httpd::vhost::package::site { 'foo_sitea': } httpd::vhost::package::site { 'foo_siteb': } httpd::vhost::package::site { 'bar': } } What I need to happen is that sitea and siteb have the same parent "foo" folder. The problem I am having is when I call a define to ensure the "foo" folder exists. Below is the site define as I have it, hopefully it will make sense what I am trying to accomplish. class httpd::vhost::package { File { owner => root, group => root, mode => 0660 } define site() { $app_parts = split($name, '[_]') $app_primary = $app_parts[0] if ($app_parts[1] == '') { $tpl_path_partial_app = "${app_primary}" $app_sub = '' } else { $tpl_path_partial_app = "${app_primary}/${app_parts[1]}" $app_sub = $app_parts[1] } include httpd::vhost::log::base httpd::vhost::log::app { $name: app_primary => $app_primary, app_sub => $app_sub } } } class httpd::vhost::log { class base { $paths = [ '/tmp', '/tmp/var', '/tmp/var/log', '/tmp/var/log/httpd', "/tmp/var/log/httpd/${service_env}" ] file { $paths: ensure => directory } } define app($app_primary, $app_sub) { $paths = [ "/tmp/var/log/httpd/${service_env}/${app_primary}", "/tmp/var/log/httpd/${service_env}/${app_primary}/${app_sub}" ] file { $paths: ensure => directory } } } The include httpd::vhost::log::base works fine, because it is "included", which means it is only implemented once, even though site is called multiple times. The error I am getting is: Duplicate declaration: File[/tmp/var/log/httpd/dev/foo]. I looked into using exec, but not sure this is the correct route, surely others have had to deal with this before and any insight is appreciated as I have been grappling with this for a few weeks. Thanks.

  Read the article

• How can Windows XP/7 users cleanly connect to Mac OS X Server 10.9.4 Mavericks with Active Directory integration?

  - by JakeGould

  I’m a Linux/Unix systems admin who also manages a Macintosh server infrastructure & there is a lone Mac Mini in the mix running 10.9.4 that I would like Windows XP & Windows 7 users to connect to with little or no hassle. The problem? Windows users can’t seem to even get to the point of a password prompt yet connect. Mind you this server replaced a Mac OS X 10.6.8 server that had issues, but never had issues with Windows users connected. The gist of this post is: The tons of different messages out there about Mac OS X 10.9.4 Samba support are mind-numbingly confusing. Can anyone share some solid specifics here? I’ve read pieces like this one here that suggest turning off file sharing & then adding a share with AFP/SMB enabled would work. But the suggestion seems to apply to 10.8. And from what I know a lot has changed in Samba support in 10.9 let alone the iterations to 10.9.4. Then I found this great tutorial here that explains things step-by-step. Which seems like it should work, but the problem is the example given applies to a local user created on the Mac when I would like users in an Active Directory group—which the Mac is bound to—access the Mac Mini shares. There are also tons of great tips here on MacWindows.com but nothing seems solid to the issue I am facing. So from what I am reading these are my options: Local User Versus Active Directory: Setup a common local user on the Mac OS X 10.9.4 server to be used for Samba sharing since Active Directory won’t work. Is this really the case? Because loss of AD integration is a major pain. Do Extended File Attributes Get Retained from Windows Users: If this were to work, how do extended attributes come into play? Loss of metadata & related info is not an option. How Fragile is Any of this to Updates: How does any of this shake out with Mac OS X updates as well as Windows updates? Installing Official, Open Source Samba: Would upgrading the Samba install on the server to the official open source Samba via a package like SMBUp or via the Hombrew method described here help or make the issue worse? I fully understand there have historically been issues in mixed environments, but nowadays Windows users connecting to a Mac seem to have a truly hellish road ahead of them. Unless I am missing something?

  Read the article

• Amusing or Sad? Network Solutions

  - by dbasnett

  When I got sick my email ended up in every drug sellers email list. Some days I get over 200 emails selling everything from Viagra to Xanax. Either they don't know what my condition is or they are telling me you are a goner, might as well chill-ax and have a good time. In order to cut down on the mail being downloaded I thought I would add all of the Junk email senders from Outlook to my Network Solution mail server. Much to my amazement I could not find that import Spammers button, so I submitted a tech support request. Here is the response: Thank you for contacting Network Solutions Customer Service Department. We are committed to creating the best Customer experience possible. One of the first ways we can demonstrate our commitment to this goal is to quickly and efficiently handle your recent request. We apologize for any inconvenience this might have caused you. With regard to your concern, please be advised that we cannot import blocked senders in to you e-mail servers. An alternative option is for you to create a Custom Filter that filters unwanted e-mails. To create a Custom Filter: Open a Web browser (e.g., Netscape, Microsoft Internet Explorer, etc.). Type mail.[domain name].[ext] in the address line. Login to your Network Solutions email account. Click on the Configuration left menu tab. Click on the Custom Filter link. Type the rule name. blah, blah, blah Basically add them one at a time. "We are committed to creating the best Customer experience possible." No you are not. You are trying to squeeze every nickle you can out of me. "With regard to your concern, please be advised that we cannot import blocked senders in to you e-mail servers." Maybe I should apply for a job to write those ten complicated lines of code... Maybe I should question my choice of vendors, because if they truly "cannot" then they are to stupid to have my business. It is both amusing and sad. I'll be posting this in every forum I am a member of.

  Read the article

• Tracking down rogue disk usage

  - by Amadan

  I found several other questions regarding the theory behind my problem (e.g. this, this), but I don't know how to apply the answers to my machine. # du -hsx / 11000283 / # df -kT / Filesystem Type 1K-blocks Used Available Use% Mounted on /dev/mapper/csisv13-root ext4 516032952 361387456 128432532 74% / There is a big difference between 11G (du) and 345G (df). Where are the remaining 334G? It's not in deleted files. There was only one, it was short, and I truncated it just in case. This is what remains: # lsof -a +L1 / COMMAND PID USER FD TYPE DEVICE SIZE/OFF NLINK NODE NAME zabbix_ag 4902 zabbix 1w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4902 zabbix 2w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4906 zabbix 1w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4906 zabbix 2w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4907 zabbix 1w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4907 zabbix 2w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4908 zabbix 1w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4908 zabbix 2w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4909 zabbix 1w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4909 zabbix 2w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4910 zabbix 1w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4910 zabbix 2w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) I rebooted to see if fsck does anything. But, from /var/log/boot.log, it seems there are no issues: /dev/mapper/server-root: clean, 3936097/32768000 files, 125368568/131064832 blocks Thinking maybe someone overzealously reserved root space, I checked the master record: # tune2fs -l /dev/mapper/server-root tune2fs 1.42 (29-Nov-2011) Filesystem volume name: <none> Last mounted on: / Filesystem UUID: 86430ade-cea7-46ce-979c-41769a41ecbe Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype needs_recovery extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize Filesystem flags: signed_directory_hash Default mount options: user_xattr acl Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 32768000 Block count: 131064832 Reserved block count: 6553241 Free blocks: 5696264 Free inodes: 28831903 First block: 0 Block size: 4096 Fragment size: 4096 Reserved GDT blocks: 992 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 8192 Inode blocks per group: 512 Flex block group size: 16 Filesystem created: Fri Feb 1 13:44:04 2013 Last mount time: Tue Aug 19 16:56:13 2014 Last write time: Fri Feb 1 13:51:28 2013 Mount count: 9 Maximum mount count: -1 Last checked: Fri Feb 1 13:44:04 2013 Check interval: 0 (<none>) Lifetime writes: 1215 GB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 First orphan inode: 28836028 Default directory hash: half_md4 Directory Hash Seed: bca55ff5-f530-48d1-8347-25c004f66d43 Journal backup: inode blocks The system is: # uname -a Linux server 3.2.0-67-generic #101-Ubuntu SMP Tue Jul 15 17:46:11 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux # cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.2 LTS" Does anyone have any tips on what exactly to do to find and hopefully reclaim the missing space?

  Read the article

• Having troubles connectiong Magento to external Windows Database Server using Windows Azure

  - by Kevin H

  "I tried to make this easy to read through" I am using Ubuntu 12.04 LTS for Magento and installed these commands onto the system: sudo apt-get install apache2 sudo apt-get install php5 libapache2-mod-php5 sudo apt-get install php5-mysql sudo apt-get install php5-curl php5-mcrypt php5-gd php5-common sudo apt-get install php5-gd I used Windows Server 2008 R2 August 2012 for Mysql Server For a reference, I used http://www.windowsazure.com/en-us/manage/windows/common-tasks/install-mysql/ When the server was setup, I added an empty disk to it Then, I added endpoints 3306 Next I accessed the server remotely After that, I formatted the empty disk and was inserted as F: Next I downloaded Mysql from http://*.mysql.com version Windows (x86, 64-bit), MSI Installer 5.5.28 In the installation process, I used these settings: Typical Setup - Clicked Next, install, next Chose Detailed Configuration - Clicked next Chose Dedicated MySQL Server Machine - Clicked Next Chose Transactional Database Only - Clicked Next Chose the "F:" Drive - Clicked Next Chose Online Transactional Processing (OLTP) - Clicked Next For Networking Options, I checkmarked 'Enable TCP/IP Networking" 'Add firewall exception for this port' 'Enable Strict Mode' - Clicked Next Chose Standard Character Set - Clicked Next For Windows Options, I checkedmarked 'Install as Window Service" 'Launch the MySQL Server automatically' 'Include Bin Directory in Windows PATH - Clicked Next For Security Options, I checkmarked 'Modify Security Settings' and set root password - Clicked Next Finally clicked Execute and Finish These are the Firewall Setting that I set I clicked inbound rules Properties Scope Allow IP Address and used the internal Address for Magento Server Clicked Apply and exited Next, I opened up MySQL 5.x Command Line Client Entered Root Password Then entered these commands mysql create database magento; mysql Create user magentouser identified by 'password'; mysql Grant select, insert, create, alter, update, delete, lock tables on magento.* to magentouser mysql exit Finally, I opened up the Magento Downloader Magento validation has approved all PHP version is right. Your version is 5.3.10-1ubuntu3.4. PHP Extension curl is loaded PHP Extension dom is loaded PHP Extension gd is loaded PHP Extension hash is loaded PHP Extension iconv is loaded PHP Extension mcrypt is loaded PHP Extension pcre is loaded PHP Extension pdo is loaded PHP Extension pdo_mysql is loaded PHP Extension simplexml is loaded These are all installed on Magento Server For the Database Connection, I used: The Database server only has MySQL 5.5 Server installed on it Host - Internal IP address User Name - The User I created when setting up database Password - The Password I created when setting up database For the password, I did some research and found out that Magento only accepts alphanumeric, so I went and set it up again and used only alphanumeric for the User password Now, I am still getting Accessed denied for database Connection. Also, I have tryed to setup mysql on independant Linux Server but kept getting errors. When, I found the solution. Wouldn't work, so I decided to try Windows. These is the questions, I have been asking and researching to debug this issue Is it because I am using Linux for magento and Windows for Database. I have had no luck in finding a reason why this wouldn't work There must be something, I am missing I also researched the difference between linux sql databases and windows sql databases but have not come to conclusion, if installing Mysql on windows would make a difference in syntax and coding. I have spent a lot of time looking into this and need some help with direction on how to complete my project. Any type of help would be appreciated.

  Read the article

• Complete Active Directory redesign and GPO application

  - by Wolfgang Kuehne

  after much testing and hundreds of tries and hours invested I decided to consult you experts here. Overview: I want to apply some GPO to our users which will add some specific site to the Trusted Sites in Internet Explorer settings for all users. However, the more I try the more confusing the results become. The GPO is either applied to one group of users, or to another one. Finally, I came to the conclusion that this weird behavior is cause rather by the poor organization in Users and Groups in Active Directory. As such I want to kick the problem from the root: Redesign the Active Directory Users and Groups. Scenario: There is one Domain Controller, and we use Terminal Services (so there is a Terminal Server as well). Users usually log on to the Terminal Server using Remote Desktop to perform their daily tasks. I would classify the users in the following way: IT: Admins, Software Development Business: Administration, Management The current structure of the Active Directory Users and Groups is a result of the previous IT management. The company has used Small Business Server which has created multiple default user groups and containers. Unfortunately, the guys working before me have do no documentation at all. Now, as I inherit this structure I am in the no mans land. No idea which direction to head first. As you can see, the Active Directory User and Groups have become a bit confusing. There is no SBS anymore, but when migrating from SBS to the current Windows Server 2008 R2 environment the guys before me have simply copied the same structure. The real question: Where should I start cleaning from, ensuring that I won't break totally the current infrastructure? What is a nice organization for the scenario that I have explained above? Possible useful info for the current structure: Computers folder contains Terminal Services Computers user group Members: TerminalServer computer located at Server -> Terminalserver OU Member of: NONE Foreign Security Principals : EMPTY Managed Service Accounts : EMPTY Microsoft Exchange Security Groups : not sure if needed, our emails are administered by external service provider Distribution Groups : not sure if needed Security Groups : there are couple of groups which are needed SBS users : contains all the users Terminalserver : contains only the TerminalServer machine

  Read the article

• Understanding packet flows over RVI

  - by choco-loo

  I'm trying to get a full grasp of firewall filters and how to apply them on a Juniper EX4200 switch - to be able to block ports, police traffic and shape traffic. The network architecture is as follows internet >-< vlan4000 >-< vlan43 vlan4000 is a public "routed" block (where all the IPs are routed to and the internet gw is) vlan43 is a vlan with public IPs with devices (servers) attached There are static routes and RVI's on the EX4200 to send all traffic via vlan4000's gateway to reach the internet. I've set up filters on both input and output of the respective RVI's and VLAN's - with simple counters, to measure traffic flow from a server inside of vlan43 and a server on the internet. Using a combination of iperf for UDP and TCP tests and fping for ICMP tests - I observed the following, icmp vlan43>internet internet>vlan43 unit4000-counter-in 0 0 unit4000-counter-out 0 0 unit43-counter-in 100 100 unit43-counter-out 0 0 vlan4000-counter-in 6 4 vlan4000-counter-out 107 104 vlan43-counter-in 101 100 vlan43-counter-out 100 100 tcp vlan43>internet internet>vlan43 unit4000-counter-in 0 0 unit4000-counter-out 0 0 unit43-counter-in 73535 38480 unit43-counter-out 0 0 vlan4000-counter-in 7 8 vlan4000-counter-out 73543 38489 vlan43-counter-in 73535 38481 vlan43-counter-out 38938 75880 udp vlan43>internet internet>vlan43 unit4000-counter-in 0 0 unit4000-counter-out 0 0 unit43-counter-in 81410 1 unit43-counter-out 0 0 vlan4000-counter-in 18 7 vlan4000-counter-out 81429 8 vlan43-counter-in 81411 1 vlan43-counter-out 1 85472 My key goals are to set up a few filters and policers, as there will be many more VLANs - that all need protecting from each other and the internet. Then globally limit/police all outbound traffic to the internet Block inbound ports to vlan43 (eg. 22) Limit outbound traffic from vlan43 (to the internet) Limit outbound traffic from vlan43 (to other vlans) Limit outbound traffic from vlan4000 (to the internet from all vlans) Route traffic from vlans via specific routing instances (FBF) The question What I want to understand is why there isn't ever any activity on unit4000 or vlan4000 inbound or outbound counter - is this because there isn't a device on this VLAN - and that the traffic is only traversing it? And with regards to the TCP test - why is there twice as many packets on unit43-counter-in, vlan4000-counter-out and vlan43-counter-in - is this counting both the inbound and outbound traffic?

  Read the article

• How to configure Transparent IP Address Sharing (TAS) on a Mediatrix 4102 with DGW 2.0 firmware?

  - by Pascal Bourque

  I am making the switch to VoIP. I chose voip.ms as my service provider and Mediatrix 4102 as my ATA. One reason why I chose the Mediatrix over other popular consumer ATAs is that it's supposed to be easy to place it in front of the router, so it can give priority to its own upstream traffic over the home network's upstream traffic. This is supposed to work transparently, with the ATA and router sharing the same public IP address (the one obtained from the modem). They call this feaure Transparent IP Address Sharing, or TAS. Their promotional brochure describes it like this: The Mediatrix 4102 also uses its innovative TAS (Transparent IP Address Sharing) technology and an embedded PPPoE client to allow the PC (or router) connected to the second Ethernet port to have the same public IP address, eliminating the need for private IP addresses or address translations. I am interested by this feature because my router, an Apple Time Capsule, doesn't support QoS and cannot give priority to the voice packets if the ATA is behind the router. However, after hours of searching the web, reading the documentation, and good ol' trial and error, I haven't been able to configure the Mediatrix to run in this mode. Then I found a version of the manual that looks like it was for a previous version of the firmware (SIP), where there is an entire section dedicated to configuring TAS (starting at page 209). But my Mediatrix comes with the DGW 2.0 firmware, whose documentation does not mention TAS at all. So I tried to follow the TAS setup instructions from the SIP documentation and apply them to my DGW firmware, using the Variable Mapping Between SIP v5.0 and DGW v2.0 document as a reference, but no success. Some required SIP variables don't have an equivalent in DGW. So it looks like the DGW firmware does not support TAS at all, or if it does they are not doing anything to help us set it up. So right now, the Mediatrix is behind the router and VoIP works perfectly except when my upstream bandwidth is saturated. My questions are: Is downgrading to SIP firmware the only way to have my Mediatrix 4102 run in TAS mode? If not, anybody knows how to setup TAS on the DGW firmware? Is TAS mode the only way to give priority to the voice packets if I want to keep my current router (Apple Time Capsule)? Thanks!

  Read the article

• innobackupex - after restoring - quit without updating PID file

  - by clarkk

  After restoring a backup the server can't start.. restoring # tar -izxf /var/www/bak/db/2013-11-10-1437_mysql.tar.gz -C /var/www/bak/db_import # innobackupex --use-memory=1G --apply-log /var/www/bak/db_import # service mysql stop # mv /var/lib/mysql /var/lib/mysql-old # mkdir /var/lib/mysql # innobackupex --copy-back /var/www/bak/db_import # chown -R mysql:mysql /var/lib/mysql # service mysql start error log 131110 21:24:20 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql 2013-11-10 21:24:21 0 [Warning] TIMESTAMP with implicit DEFAULT value is deprecated. Please use --explicit_defaults_for_timestamp server option (see documentation for more details). 2013-11-10 21:24:21 6194 [Warning] Using pre 5.5 semantics to load error messages from /opt/mysql/server-5.6/share/english/. 2013-11-10 21:24:21 6194 [Warning] If this is not intended, refer to the documentation for valid usage of --lc-messages-dir and --language parameters. 2013-11-10 21:24:21 6194 [Note] Plugin 'FEDERATED' is disabled. /usr/local/mysql/bin/mysqld: Table 'mysql.plugin' doesn't exist 2013-11-10 21:24:21 6194 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 2013-11-10 21:24:21 6194 [Note] InnoDB: The InnoDB memory heap is disabled 2013-11-10 21:24:21 6194 [Note] InnoDB: Mutexes and rw_locks use GCC atomic builtins 2013-11-10 21:24:21 6194 [Note] InnoDB: Compressed tables use zlib 1.2.3 2013-11-10 21:24:21 6194 [Note] InnoDB: Using Linux native AIO 2013-11-10 21:24:21 6194 [Note] InnoDB: Not using CPU crc32 instructions 2013-11-10 21:24:21 6194 [Note] InnoDB: Initializing buffer pool, size = 128.0M 2013-11-10 21:24:21 6194 [Note] InnoDB: Completed initialization of buffer pool 2013-11-10 21:24:21 6194 [Note] InnoDB: Highest supported file format is Barracuda. 2013-11-10 21:24:22 6194 [Note] InnoDB: 128 rollback segment(s) are active. 2013-11-10 21:24:22 6194 [Note] InnoDB: Waiting for purge to start 2013-11-10 21:24:22 6194 [Note] InnoDB: 5.6.12 started; log sequence number 636992658 2013-11-10 21:24:22 6194 [Note] Server hostname (bind-address): '127.0.0.1'; port: 3306 2013-11-10 21:24:22 6194 [Note] - '127.0.0.1' resolves to '127.0.0.1'; 2013-11-10 21:24:22 6194 [Note] Server socket created on IP: '127.0.0.1'. 2013-11-10 21:24:22 6194 [ERROR] Fatal error: Can't open and lock privilege tables: Table 'mysql.user' doesn't exist 131110 21:24:22 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended mysql_upgrade /opt/mysql/server-5.6/bin/mysql_upgrade -u root -pxxxxx -P 3308 Warning: Using a password on the command line interface can be insecure. Looking for 'mysql' as: /opt/mysql/server-5.6/bin/mysql Looking for 'mysqlcheck' as: /opt/mysql/server-5.6/bin/mysqlcheck FATAL ERROR: Upgrade failed

  Read the article

• How to configure Transparent IP Address Sharing (TAS) on a Mediatrix 4102 with DGW 2.0 firmware?

  - by Pascal Bourque

  I am making the switch to VoIP. I chose voip.ms as my service provider and Mediatrix 4102 as my ATA. One reason why I chose the Mediatrix over other popular consumer ATAs is that it's supposed to be easy to place it in front of the router, so it can give priority to its own upstream traffic over the home network's upstream traffic. This is supposed to work transparently, with the ATA and router sharing the same public IP address (the one obtained from the modem). They call this feaure Transparent IP Address Sharing, or TAS. Their promotional brochure describes it like this: The Mediatrix 4102 also uses its innovative TAS (Transparent IP Address Sharing) technology and an embedded PPPoE client to allow the PC (or router) connected to the second Ethernet port to have the same public IP address, eliminating the need for private IP addresses or address translations. I am interested by this feature because my router, an Apple Time Capsule, doesn't support QoS and cannot give priority to the voice packets if the ATA is behind the router. However, after hours of searching the web, reading the documentation, and good ol' trial and error, I haven't been able to configure the Mediatrix to run in this mode. Then I found a version of the manual that looks like it was for a previous version of the firmware (SIP), where there is an entire section dedicated to configuring TAS (starting at page 209). But my Mediatrix comes with the DGW 2.0 firmware, whose documentation does not mention TAS at all. So I tried to follow the TAS setup instructions from the SIP documentation and apply them to my DGW firmware, using the Variable Mapping Between SIP v5.0 and DGW v2.0 document as a reference, but no success. Some required SIP variables don't have an equivalent in DGW. So it looks like the DGW firmware does not support TAS at all, or if it does they are not doing anything to help us set it up. So right now, the Mediatrix is behind the router and VoIP works perfectly except when my upstream bandwidth is saturated. My questions are: Is downgrading to SIP firmware the only way to have my Mediatrix 4102 run in TAS mode? If not, anybody knows how to setup TAS on the DGW firmware? Is TAS mode the only way to give priority to the voice packets if I want to keep my current router (Apple Time Capsule)? Thanks!

  Read the article

• WinPE, Startnet.CMD and passing variables to second batch file not working

  - by user140892

  I don't know scripting or PowerShell (yes I need to learn something). I'm not an expert batch file maker either. I have a WinPE flash drive which I used to deploy OS images. I have the WIM, drivers and anything needed else outside the WinPE environment to ensure that Updates, changes are easier for me to make. I use the "STARTNET.CMD" batch file which is part of the WinPE. The reason to go through the letter drives is that the WinPE always gets the X letter drive assigned. The flash drive itself can receive a random letter which always changes. My deployment menu is located on the flash drive it self and not inside the WinPE. This is so that if I need to make a change I don't have to re-do the WinPE. I am able to locate the "menu.bat" batch file and launch it. I use a variable to capture the letter drive. I call the second batch file named "menu.bat" and pass the variable to it. When the second batch file loads, I believe that I am calling the variable correctly. If I break out of the batch file I can echo the variable and see the expected reply. The issue is that I can't use the variable to work with anything on the second batch file. In my test, I can get this to work over and over. When it runs from the real USB flash drive it does not work. I removed comments from the second batch file to make it smaller. My issue is that files below all get a message stating that the system cannot find the path specified. Diskpart Imagex.exe bcdboot.exe Why can't I get the varible to properly function when I try to using example "ImageX.exe"? Contents of the Startnet.cmd @echo off for %%p in (a b c d e f g h i j k l m n o p q r s t u v w x y z) do if exist %%p:\Tools\ set w=%%p Set execpatch=%w%\Tools\ call %w%:\Menu.bat \Tools\ Contents of the Menu.BAT @echo off set SecondPath=%1 cls :Start cls Echo. Echo.============================================================== Echo. Windows 7 64 Bit Ent Basic Desktops Echo.============================================================== Echo. Echo A. 790 Windows 7 - Basic Echo. Echo. Echo I. Exit Echo. Echo. set /p choice=Choose your option = if not '%choice%'=='' set choice=%choice:~0,1% if '%choice%'=='a' goto 790_Windows_7_Basic echo "%choice%" is not a valid (answer/command) echo. goto start :790_Windows_7_Basic REM DISKPART /s %SecondPath%BatchFiles\Make-Partition.txt %SecondPath%imagex.exe /apply %SecondPath%Images\Win7-64b-Ent-Basic-SysPreped.wim 1 o:\ /verify %SecondPath%bcdboot.exe o:\Windows /s S: Copy %SecondPath%Unattended\unattend.XML o:\Windows\System32\sysprep\unattend.XML /y xcopy %SecondPath%Drivers\790\*.* o:\Windows\INF\790\ /E /Q /Y MD o:\Windows\Setup\Scripts\ Copy %SecondPath%BatchFiles\SetupComplete.cmd o:\Windows\Setup\Scripts\ /y Goto Done :Done Exit

  Read the article

• Coldfusion 8 Application Crashes Under Heavy Load

  - by KM01

  Hello, We have a CF8 app that runs for 20-25 minutes before crashing under heavy load ~ 1200 users. This load is generated by our load testing tool: 1200 users ramped up in 5 mins (approx behavior of our users), running for an hour. We have this app on Solaris 10, Apache 2, JRun 4 and Oracle 10g. Java version is 1.6. During the initial load tests, the thread dumps pointed to monitor deadlocks that pointed to sessions. "jrpp-173": waiting to lock monitor 0x019fdc60 (object 0x6b893530, a java.util.Hashtable), which is held by "scheduler-1" "scheduler-1": waiting to lock monitor 0x026c3ce0 (object 0x6abe2f20, a coldfusion.monitor.memory.SessionMemoryMonitor$TopMemoryUsedSessions), which is held by "jrpp-167" "jrpp-167": waiting to lock monitor 0x019fdc60 (object 0x6b893530, a java.util.Hashtable), which is held by "scheduler-1" We increased the number of sessions relative to the number of CPUs (48 simultaneous threads against 32 CPUs), and the deadlock went away. While varying the simultaneous threads helped a little bit in terms of response time, the CF server still tanked in 20-25 minutes during all of these tests. We ran more thread dumps, and saw a thread locking a monitor, for e.g.: "jrpp-475" prio=3 tid=0x02230800 nid=0x2c5 runnable [0x4397d000] java.lang.Thread.State: RUNNABLE at java.util.HashMap.getEntry(HashMap.java:347) at java.util.HashMap.containsKey(HashMap.java:335) at java.util.HashSet.contains(HashSet.java:184) at coldfusion.monitor.memory.MemoryTracker.onAddObject(MemoryTracker.java:124) at coldfusion.monitor.memory.MemoryTrackerProxy.onReplaceValue(MemoryTrackerProxy.java:598) at coldfusion.monitor.memory.MemoryTrackerProxy.onPut(MemoryTrackerProxy.java:510) at coldfusion.util.CaseInsensitiveMap.put(CaseInsensitiveMap.java:250) at coldfusion.util.FastHashtable.put(FastHashtable.java:43) - locked <0x6f7e1a78> (a coldfusion.runtime.Struct) at coldfusion.runtime.CfJspPage._arrayset(CfJspPage.java:1027) at coldfusion.runtime.CfJspPage._arraySetAt(CfJspPage.java:2117) at cfvalidation2ecfc1052964961$funcSETUSERAUDITDATA.runFunction(/app/docs/apply/cfcs/validation.cfc:377) As you see in the last line above there were several references CFMs and CFCs, and the lines have "cflock" tags, which were scoped to the "application." We (the dev team) then changed them to be scoped to a "name". After more load tests, there is no locking going on and there no deadlocks, but now the application tanks in 7-10 minutes. We've gotten system, network and DB reports from the respective admins, and they are not being taxed; even watched the server stats with server monitor, top, prstat, ran sar reports, etc. So we believe it is an issue with the CF server or maybe the JVM. I am running out of ideas as to what else we can try. Disclaimer: I am not a CF developer or Admin. I am just running the load test, analyzing the reports, threads etc, and sharing the results with the dev and admin teams, and trying the next change, and so on. So far no dice. Has anyone run into something similar? How did you go about diagnosing and troubleshooting? All thoughts and pointers welcome. Thank you for your time! KM

  Read the article

• Why do my Application Compatibility Toolkit Data Collectors fail to write to my ACT Log Share?

  - by Jay Michaud

  I am trying to get the Microsoft Application Compatibility Toolkit 5.6 (version 5.6.7320.0) to work, but I cannot get the Data Collectors to write to the ACT Log Share. The configuration is as follows. Machine: ACT-Server Domain: mydomain.example.com OS: Windows 7 Enterprise 64-bit Edition Windows Firewall configuration: File and Printer Sharing (SMB-In) is enabled for Public, Domain, and Private networks ACT Log Share: ACT Share permissions*: Group/user names Allow permissions --------------------------------------- Everyone Full Control Administrator Full Control Domain Admins Full Control Administrators Full Control ANONYMOUS LOGON Full Control Folder permissions*: Group/user name Allow permissions Apply to ------------------------------------------------- ANONYMOUS LOGON Read, write & execute This folder, subfolders, and files Domain Admins Full control This folder, subfolders, and files Everyone Read, write & execute This folder, subfolders, and files Administrators Full control This folder, subfolders, and files CREATOR OWNER Full control Subfolders and files SYSTEM Full control This folder, subfolders, and files INTERACTIVE Traverse folder / This folder, subfolders, and files execute file, List folder / read data, Read attributes, Read extended attributes, Create files / write data, Create folders / append data, Write attributes, Write extended attributes, Delete subfolders and files, Delete, Read permissions SERVICE (same as INTERACTIVE) BATCH (same as INTERACTIVE) *I am fully aware that these permissions are excessive, but that is beside the point of this question. Some of the clients running the Data Collector are domain members, but some are not. I am working under the assumption that this is a Windows file sharing permission issue or a network access policy issue, but of course, I could be wrong. It is my understanding that the Data Collector runs in the security context of the SYSTEM account, which for domain members appears on the network as MYDOMAIN\machineaccount. It is also my understanding from reading numerous pieces of documentation that setting the ANONYMOUS LOGON permissions as I have above should allow these computer accounts and non-domain-joined computers to access the share. To test connectivity, I set up the Windows XP Mode virtual machine (VM) on ACT-Server. In the VM, I opened a command prompt running as SYSTEM (using the old "at" command trick). I used this command prompt to run explorer.exe. In this Windows Explorer instance, I typed \ACT-Server\ACT into the address bar, and then I was prompted for logon credentials. The goal, though, was not to be prompted. I also used the "net use /delete" command in the command prompt window to delete connections to the ACT-Server\IPC$ share each time my connection attempt failed. I have made sure that the appropriate exceptions are Since ACT-Server is a domain member, the "Network access: Sharing and security model for local accounts" security policy is set to "Classic - local users authenticate as themselves". In spite of this, I still tried enabling the Guest account and adding permissions for it on the share to no effect. What am I missing here? How do I allow anonymous logons to a shared folder as a step toward getting my ACT Data Collectors to deposit their data correctly? Am I even on the right track, or is the issue elsewhere?

  Read the article

< Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >