Search Results

Search found 10693 results on 428 pages for 'stay updated'.

Page 197/428 | < Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >

  • Netbook thinks it is a desktop

    - by Narcolapser
    Question: Are, and if so what, there packages for download that I can get netbook to understand it is not a desktop and that it is a netbook. Info: I'm running an Acer Aspire One with ubuntu desktop 9.10. I tried Ubuntu Netbook Remix first but it has graphics issues with the aspire one. So I changed to Ubuntu Desktop. It was the only distro (after debian, centOS, Fedora, and Knoppix all failed me) that I managed to get working. The only thing is that it is having issues doing things that a netbook/laptop should be doing. most notably is that it will run it's battery dead if I close the screen and throw it into my back pack. It seems to just stay fully on and runs it's self to death. also it will lock up some times if I close the screen and come back to it 10 or 20 minutes later. It also won't retain volume settings when I reboot, as well as screen brightness. and just a couple of other things that I can't quite put my finger on, but just seem amiss. like I said, Essentially my netbook thinks it is a desktop, how can I fix this? ~N

    Read the article

  • wireless to wired internet

    - by Mark T
    My wife uses an old computer which doesn't really like having an internet connection via a USB wireless adapter. I've tried several, and none have been satisfactory. The connection gets dropped often and it is frustrating for her. A wireless card also had the same trouble. Repositioning the computer made no difference. (Two laptops, nearby, connect just fine and stay up, so it isn't the router.) However, the computer always worked well when I had an Ethernet cable connected to it. I know there is a box which will connect to my wireless network and provide an Ethernet cable connection. But the terminology used is so complex, I can't tell what it is I really need. In case that wasn't clear, here it is in different words: What I need is just the opposite of a wireless router. My wireless router takes my cable modem's Ethernet connection and makes it available to wireless clients. What I want is a box which is a wireless client to my wireless router and provides an Ethernet cable connection that I can connect to any device. I need to know the right name for a box with such capabilities. If you know of some inexpensive examples, that would also be helpful. I'm running a wireless G network with a Linksys Router.

    Read the article

  • Excel table auto update

    - by Mike
    So I have a table in Excel with formulas. When I add a new row, the new row automatically fills in the formulas as well, which is great. My problem is that it also changes the formula in the row above the added row as well. Here's what happens specifically: My table's last row is row 24. A formula I have in that row is the following: =COUNTIF(C$11:C24,"y")/(COUNTIF(C$11:C24,"Y")+COUNTIF(C$11:C24,"N")) When I add in data in row 25 the formula is updated in row 25 as well, which is what I want, to the following: =COUNTIF(C$11:C25,"y")/(COUNTIF(C$11:C25,"Y")+COUNTIF(C$11:C25,"N")) My problem is that the row above also updates - my row 24 changes to the same as row 25 (the C24 goes to C25). Why is my row 24 formula changing when I add a row 25? Note, my formulas above row 24 stay the same when I add in row 25 - only row 24 changes when I add in 25. Is there a way to not update the row above the row being added? This problem continues when additional rows are added - If I add in a row 26, then the formula in rows 24-26 then all reference C26. Why are they all updating?

    Read the article

  • Intel Motherboard Lightning Victim Dies Hard

    - by Stetson RDT
    Today, I have a more hardware-related question. I have an Intel board, and I really do not know which board it is, I built the machine for a relative, but he forgot to keep the documentation. Long story short, the computer was disconnected during a lightning storm, but a lightning strike travelled in via the ethernet cable (It was directly connected to a power brick commonly seen on those long distance ISP Wireless transmitters), and the motherboard was shocked. I am attempting to get this PC going. The problem is as follows: The computer will randomly reboot, just in the middle of anything as it pleases. May load to EFI (or whatever BIOS is nowadays), may load to bootloader, may even get to the OS. But before 5 minutes is up, the system will always die. Out of curiosity, I plugged my voltmeter in to a molex connector. On the 5V side, it gets a good, consistant +5.13V. On the 12V side, it fluctuates, as follows: Upon immediate startup, it soars to 12.11-12.13V. It will now do one of two things: it will immediately jump down to 12.04-12.05V, or hover for about a minute at 12.11-12.13, then jump down. It seems the longer the voltage stays at 12.11-12.13, the shorter the machine will stay running. Also, post codes, whenever the machine locks up, but does not die hard, seem to be between "AA" and "AC". Does this make any sense to anybody? Do you all think this motherboard is salvageable? It was an expensive bugger, and I'd prefer to not replace it.

    Read the article

  • what are these weird IP address connections in resource monitor?

    - by bill
    I decided to check out Resource Monitor (on the 'Performance' tab in Task Manager, Windows 7) and I noticed in the "Network" section that the 'System' image name kept making a bunch (~5 at a time) of connections to random IP addresses, it would show anywhere from 1-500 bytes/sec 'sent'. They would stay connected for 1-2 minutes. -All web browsers are closed So, first thing I did was run a trace from network-tools.com on some of these IP addresses. 8/10 were outside of US and did not resolve to any host name. Of the 10 IP addresses I traced, 2 were in US, 4 showed origins in China, and one each to Algeria, Russia, Pakistan, Korea. (!) So, the next thing I did was turn off my wireless card, watch the connections disappear, then turn the card back on, and within 30 seconds more random connections were created by System, with different IP addresses from the first time. The next thing I did was go open Task Manager, Show Processes From All Users, then I killed just about everything that wasn't (what appeared to be) a windows process. Turned on wi-fi, and again within 30 seconds, random IP addresses connect for ~ 1 min at a time, new ones coming and going. I occasionally use bit torrent on this machine, but there was definitely no process that seemed related to bt running after I went through task manager, and bt wasn't open to begin with. So, any ideas on what these connections might be for? I have been using Ad-Aware Free and AVG Free on this computer for a while now, always up to date..

    Read the article

  • Automatically update SVN repository on another server

    - by Mikey C
    We have 2 Ubuntu web servers, one of which is our staging server (Staging) and the other is our live server (Live). Staging has our Subversion repository, as well as the latest version of our sites on it. Because the SVN server is running on Staging, I've added post-commit hook scripts so that the staging server automatically has the latest code. Easy. However, I'd like one of the repositories on Live to also stay updated. This is a repository of images, PDFs and suchlike. When a team member commits to this, I'd like it to automatically update on the live servers so it can be used in mailings, content managed pages etc. I'd add something to the post-commit to SSH across and update, but for security, we can only SSH from one server to another as user 'commandLine', whereas the 'www-data' user runs the post-commit. I'd rather not run a cron on Live to update every 5 minutes, but I can't see another way of doing it without altering all our user permissions. Any ideas?

    Read the article

  • How would I write a terminal command to download a folder with wget from a Media Temple (gs) server?

    - by racl101
    I'm trying to download a folder using wget on the Terminal (I'm usin a Mac if that matters) because my ftp client sucks and keeps timing out. It doesn't stay connected for long. So I was wondering if I could use wget to connect via ftp protocol to the server to download the directory in question. I have searched around in the internet for this and have attempted to write the command but it keeps failing. So assuming the following: ftp username is: [email protected] ftp host is: ftp.s12345.gridserver.com ftp password is: somepassword I have tried to write the command in the following ways: wget -r ftp://[email protected]:[email protected]/path/to/desired/folder/ wget -r ftp://serveradmin:[email protected]/path/to/desired/folder/ When I try the first way I get this error: Bad port number. When I try the second way I get a little further but I get this error: Resolving s12345.gridserver.com... 71.46.226.79 Connecting to s12345.gridserver.com|71.46.226.79|:21... connected. Logging in as serveradmin ... Login incorrect. What could I be doing wrong?

    Read the article

  • Is there a remote desktop or vnc app for the IPad that properly handles Bluetooth keyboard shortcuts?

    - by Steve Bison
    I've tried 4 or 5 remote desktop apps, the most notable being Jump Desktop and Splashtop Streamer. Most of these remote desktop apps have some sort of on-screen keyboard for typing with the IPad, including special keys like shift, control, alt. The special keys act like "sticky keys" meaning they stay depressed until another key is pressed, to make it easier to do key combinations. Even non-standard keyboard combinations like shift+enter work, in this sticky sense. When using a Bluetooth keyboard with the remote desktop apps, both Jump and Splashtop Streamer recognize the shift + letter combination for doing capital letters. However, generically pressing shift, cntrl, or alt does not depress the sticky on screen shift buttons or do anything at all. Only a few combinations are recognized (again like shift+letter, cntrl+C). Most combinations do not work (shift+enter, alt+tab). Even having the keyboard shortcuts work like sticky keys (press shift then enter, not both at once) would be much better than the limited functionality they have now. Is there an app, jailbreak app, or workaround that lets me use bluetooth keyboard properly with remote desktop on the ipad?

    Read the article

  • Is it possible to get ESC to behave as an actual escape key?

    - by leftaroundabout
    So I have finally switched, not so much because I'm yet convinced Emacs in itself is the better editor but because it certainly does have more powerful extensions. I am still using vim-mode though, perhaps that's part of my problem... but I really don't intend to abandon the modes-approach, so I'll probably stay with it. I'm getting along quite well, but one thing I find really unnerving is the behaviour of the esc key (which I have in the shift-lock position). I'm used to relying on this a lot as more or less a "panic key", which may not be nice but I find allows me to work generally quite a bit less caring about the keystrokes themselves, and thus faster. What I'd like this key to do is just get me out of any minibuffer or special editing mode into a well-defined normal state. Perhaps most importantly, I would like it to not do anything unrelated, Simulate meta. What do I have an alt key for? Close windows I'm not even in at the time. Getting interpreted as the final key in some key sequence. ... Is it possible to turn all that off and make esc an actual escape key? Vim-mode does make it behave kind of as I like in some situations, but when other plugins are involves this often breaks. Alternatively, are there different options that might suit my kind of workflow?

    Read the article

  • Laptop seemingly randomly "freezes" to the point of no longer executing applications

    - by Aierou
    After upgrading to Windows 8 pro on my Samsung Series 7 Chronos NP700Z5C-S04US (may be relevant, I'm not sure), my computer began to stop allowing the execution of any service or application, as well as discontinuing the update of the clock until a hard shutdown was performed. This seems to occur randomly after periods of inactivity and I've no idea the cause. These are measures I have already taken in order to attempt to stop this: -Obviously Googling potential answers to this problem -Updating all drivers -Researching all events that have occurred around the time of the failure to respond (with no results) -I tried applying "bcdedit /set disabledynamictick no" which was a hotfix for what seemed to be the same error but was not. Here is some more, potentially related, information about the error: -No BSOD (actually, I haven't at all experienced a BSOD with Windows 8) -Computer seems to have a problem shutting down/restarting most of the time (Hangs at the point where it should completely turn off) -New sound instances are not able to play, but previously loaded containers function properly -As mentioned before, the clock freezes at the time of the error -USB devices function properly -Servers that I was running fail to respond on my end, but stay online. If you require more information, please request it specifically and I will be happy to oblige. Thanks.

    Read the article

  • Free blog sites where the blogs can (if the template does) validate as XHTML Strict 1.0?

    - by Deleted
    I'm looking for a site where I may register a free blog and have the blog validate as XHTML Strict 1.0. On the surface this may seem like a trivial problem only related to the theme/template in use, but that's unfortunately not the case. One example of a provider which can't fullfill this requirement is Blogger. Altough the pages of the blogs there presents themselfs as XHTML 1.0 Strict it is impossible to actually comply with the requirements inheritied by that markup type in the blog (as the XHTML which is generated by Blogger makes the page as a whole invalid). I've sent a mail to Tumblr to see if it was possible with them, but so far my reply consists of them having forwarded my mail with a "suggestion" to the development department. I don't know if we had a communication error or if I'm actually going to receive a proper answer later. Time will tell. I haven't had time to investigate Tumblr myself, so they may very well be the solution to this problem. To sum things up, I'm looking for any provider: Of a free blog. The blog must have the capability to validate as XHTML Strict 1.0. With capability I mean that the system shouldn't get in the way of creating/using a theme which complies as XHTML Strict 1.0. Preferably is large or at least likely to stay around for a couple of years to come. But I'm willing to take my chances if none of the established providers are up to the task. Thank you for reading! I hope you know of any provider which would be suitable, preferably with proof by linking to a blog there which validates. I'm not looking for suggestions to look into, as there are far to many to investigate and far too little time. If you know of something for sure, I'd be very happy to know about it.

    Read the article

  • Take a regular Windows 7 clone with clonezilla (device-to-image)

    - by Mario De Schaepmeester
    I am unexperienced with cloning software and I've decided to use Clonezilla as it seemed best as freeware. I chose device image and left most options standard. I chose expert mode anyway to see what I could configure, and decided to try the lzop algorithm instead of the default one for compression. The rest was left at default. When Clonezilla asked me which partitions to clone (I chose parts to image), I chose the C:\ drive but Windows 7 also creates a 100MB partition on setup for system files (the actual boot partition?). I copied that into the image as well. The reason I didn't choose disk to image is that I also have a data partition that needs to stay intact. Now I'm simply not sure that this is the way to go, should I ever need to restore my disk image. Will Clonezilla know what to do with both partitions and will Windows 7 work perfectly after restoring? Edit: apparantly a similar question has been asked before. The link to the first article in the answer is not relevant to me since it covers a device-to-device clone. It appears the windows installation disk can repair the 100MB partition. As for Clonezilla, it copies "hidden data after the MBR" by default too. I don't know, I feel I'll be allright whether by restoring the partition with Clonezilla or repairing it with the Windows 7 disk.

    Read the article

  • PHP potential issues with compiling 5.3.8 extensions against RHEL 6 / CentOS 6 PHP 5.3.3 package

    - by user101203
    I'm working on getting a Red Hat 6 LAMP server going and while the PHP that comes with it has many extensions we use, it doesn't have all of them. To solve this, I was thinking about either compiling the PHP extensions which come in the ext folder of the downloadable source code of PHP 5.3.3 from php.net same as #1, but using the extensions from the latest PHP version (currently 5.3.8). Do #1 but manually decide which updates to backport from the latest version of the PHP extensions into the older version and then compile the backported result A drawback to #1 is that security and bug fixes come out which we wouldn't be able to take advantage of. A drawback to #3 is that it might be a lot of work Does anyone know what the drawbacks to #2 are? I don't want to go down that route if it might result in some unexpected negative outcomes. Also, are there any other drawbacks to the other options or a better way to go altogether? I want to use the PHP 5.3.3 which comes with the Linux distro because I don't want us to get to a place again where we are forced to upgrade to a new version of PHP to stay on top of security updates like from PHP 5.2.x to 5.3.x and there be backwards incompatible changes (this is the situation we're in now with PHP 5.2.x no longer being supported).

    Read the article

  • Does Google sometimes ignore "special" characters, possibly depending on your location or font type settings? [closed]

    - by RLH
    TLDR Google tends to ignore special characters in my search strings. Is there anything that I can do about it and is it, possibly, happening because Google makes certain assumptions based off of my default text-encoding settings and my location? I just posted this question over at StackOverflow. I had found a C preprocessor that I'd never seen before. As I should have done, I Googled it and tried to find out further information. I attempted various search terms which were all variations of "C Operator ##" (some times with and some times without the double-quotes.) Google didn't bring back anything of use so I posted my question on SO. As you can see from the comments, someone mentioned a search string (ironically one which I did try to search) and stated that I could have even hit the "I'm feeling lucky" button and have gotten my answer. The problem is I did search that, and the results that I received were far more basic and even after following the top results and searching the resulting pages, I could find nothing referencing the string "##". I'm not posting this question to complain but it does provide an empirical example of something I've seen before that really bugs me-- Google often ignores special characters in my search strings and the results are often useless. As a developer I often need to search for string values containing non-alphanumeric characters. Some characters (like the underscore or hyphen) can be used without trouble. However, other characters (such as the ampersand, carat, tilde and pound sign) are often ignored in my query strings. Is there a way to prevent this from happening so that I can get meaningful results from Google? NOTE I stay logged into Google and I live in the US. I wonder if Google detects some form of text-encoding setting or derives my results based off of certain, localized text-based assumptions. Regardless, I would like to for Google to search for what I give it. Is there anything that I can do to improve my results?

    Read the article

  • 100% CPU when doing 4 or more concurrent requests with Magento

    - by pancake
    Currently I'm having trouble with a server running Magento, it's unbelievably slow. It's a VPS with a few Magento installations on it used for development, so I'm the only one using them. When I do 4 request all 2 seconds after each other I'm finished in 10 seconds. Slow, but still within the limits of my patience. When I do 4 "concurrent" requests, however (opening 4 tabs in a row, very quickly) all four cores go to 100% and stay there for like a minute. How is this possible? I know that there are a lot of possibilities here, so any tips on how to make an Apache/PHP server go faster are also welcome. It used to go a lot faster before, and I've also tried APC, but it kept causing problems (PHP errors, something with memory pools) so I've disabled it. By the way, the Magento cache is off and compiling is also off. I know this makes Magento slower than usual, but I don't think a 60 second response time is normal for any Magento installation. Virtual hardware: 4 Cores and 4096MB RAM Swap is never used (checked with htop) 100GB disk space, of which 10% is in use Software: Debian 6 DirectAdmin and apache custombuild PHP 5.2.17 (CLI) If you need more info, please tell me how to get it, because I probably don't know how. I do know how to use the command line in linux and the usage of quite a few commands, but my experience with managing a server is limited.

    Read the article

  • Network card shuts down when stressed

    - by user142485
    I have a network card that functions fine with light use, but quits functioning after heavy use. I replaced it with a brand new one and still have the same issue, also updated drivers. It is a wired D-Link card. The Internet seems fine for a small amount of web browsing but when I run a bandwidth test it starts out fast and slows quickly until the card completely quits; I have a constant ping of the gateway going while I run this and it starts timing out after a couple seconds into the speed test. The card will stay on and the data light on it still flashes some but I cannot ping the gateway or anything else until the computer is rebooted. When I boot into safe mode I can browse and run the speed test fine with no problems. I am guessing that this is probably some program that is loading in regular mode but not safe mode that is causing the issue? I have very limited software (turned off av and firewall) on the computer but I am thinking that I'll just have to start eliminating start-up programs and see if that helps. This is on Windows 7 if that makes any difference. Anyone had a similar issue or have any other suggestions/ideas for narrowing down this problem?

    Read the article

  • Wireless Internet Connection Sharing in Ubuntu

    - by klutch2
    As the title states, I need to share a wireless connection with a laptop running Ubuntu as the AP. The setup will be as follows: Corporate WiFi <<== Laptop <<== Other Devices i.e. (iPad, iPhone) I want to be able to connect the "Other Devices" via WiFi to the laptop. I have thought of setting up an ad-hoc network by connecting to the Corporate WiFi and then setting up a new network and hoping the connection to both would stay, but that doesn't seem to work. If I set up the ad-hoc network by itself, I can see it from my "Other Devices". The reason I need this is because for some reason, my iPad and my iPhone will not connect to my corporate WiFi and I need to use them so I want to use my laptop to share the connection and act as an AP for my "Other Devices". My laptop is a Chrome CR-48 running Ubuntu and as some of you might know, it does not have an ethernet port, so having a wired connecting and then setting up a network is out of question. I want to connect to the Corporate WiFi and share that connection by having the laptop act as an AP for other devices.

    Read the article

  • Debian - Problems Unmounting External Hard Drives

    - by user331981
    I recently installed Debian Testing on a new laptop and I just noticed that I am having some issues with unmounting external hard drives. I am using Mate Desktop 1.8.1. With the 1st drive, if I right click on the drive and select “safely remove”: The drive unmounts, spins down, immediately spins back up an remounts. Unable to unmount. With the 2nd drive, if I right click on the drive and select “safely remove”: The drive unmounts but does not spin down. With the 3rd drive, if I right click on the drive and select “safely remove”: The drive unmounts but does not spin down, immediately spins back up but does not remount, and after 20 seconds, it spins down and stays that way. Behavior is the same on both USB 2.0 and USB 3.0 ports. On my last laptop, on which I also used Debian Testing + Mate desktop, the safe removal of drives worked out of the box and I never had an issue with it. The drives would unmount, spin down and stay that way. To remount the drive, one needed to unplug the device and plug it back in. I am unsure how to troubleshoot this issue and I am not sure if it is merely a matter of installing a “missing” package of editing a config file. Thank you in advance.

    Read the article

  • Why is /dev/urandom only readable by root since Ubuntu 12.04 and how can I "fix" it?

    - by Joe Hopfgartner
    I used to work with Ubuntu 10.04 templates on a lot of servers. Since changing to 12.04 I have problems that I've now isolated. The /dev/urandom device is only accessible to root. This caused SSL engines, at least in PHP, for example file_get_contents(https://... to fail. It also broke redmine. After a chmod 644 it works fine, but that doesnt stay upon reboot. So my question. why is this? I see no security risk because... i mean.. wanna steal some random data? How can I "fix" it? The servers are isolated and used by only one application, thats why I use openvz. I think about something like a runlevel script or so... but how do I do it efficiently? Maby with dpkg or apt? The same goes vor /dev/shm. in this case i totally understand why its not accessible, but I assume I can "fix" it the same way to fix /dev/urandom

    Read the article

  • Sharepoint web part fails intermittently

    - by pringly
    I have a MOSS 2007 environment, 2 web servers and a DB server, load balanced between the two web servers. I deployed a web part recently, which worked fine for a while, but failed on web server 2 after a day. When it fails, it gets the error message: 'A Web Part or Web Form Control on this Page cannot be displayed or imported. The type could not be found or it is not registered as safe’ Once it has failed, it will stay that way until an IIS reset is done. The other web server never fails, I tried to force the second web server to fail to recreate the issue and have been unable to do it. I tried placing it under heavy http traffic and it handled it fine. Put it back in the pool and it failed again after about 7 hours. So, if i remove the .dll for the webpart from the affected web server, the webpart doesnt stop working. Is this normal behavior? I checked the bin directory for the site and the global assembly and it there is no other copy of the .dll anywhere else on the server. Also, when checking the web part gallery, if the web part has failed it will appear in the gallery, but by trying to add a new webpart, the .dll wont be listed. I have no idea how to continue troubleshooting from here or even fix it, any ideas?

    Read the article

  • Why would the Apache parent process restart silently?

    - by miracle
    I run apache 2.2.9 with mpm prefork on debian lenny. Following http://httpd.apache.org/docs/2.2/mod/prefork.html, I would expect that there is one parent process, running as root and listening as configured, which would start child processes as defined by the Min/Max/etc. directives. I expect the children to be restarted as per MaxRequestsPerChild, but the parent process to stay put with one process id until I restart it manually. Out of a little paranoia, I started monitoring listening ports including process ids. I have a cron job every 20 minutes to run netstat -ap | grep LISTEN and diff the output. Sometimes (about once per day) I see a series of this: 8c8 < tcp6 0 0 [::]:www [::]:* LISTEN 6194/apache2 --- tcp6 0 0 [::]:www [::]:* LISTEN 6607/apache2 10c10 < tcp6 0 0 [::]:https [::]:* LISTEN 6194/apache2 --- tcp6 0 0 [::]:https [::]:* LISTEN 6607/apache2 Over a period of an hour or three, the parent would change its pid at least once every 20 minutes, without any explanation in the log files or any other hint that anything is going wrong. This is not what I expected. What am I missing?

    Read the article

  • Redirect without changing URL

    - by Coobadivin
    Here's the setup. We have a hardware load balancer with an http virtual cluster. Let's call this virtual cluster example1.com. This virtual cluster load balances between two squid reverse proxies which are also on the same physical servers as the web servers. Squid listens on 80 and points to itself as the cache_peer web server which listens on 81. We also have a standalone web server which we will call example2.com. What we are trying to do is create a subdirectory on example1.com called example1.com/example2. This will point to example2.com, but we want our users to stay at example1.com/example2 in their browser. So, it's like a redirect without actually being a redirect. How the hell do I go about doing this? Is this even possible? I'm looking at squid docs in the meantime. example1.com is running a proprietary web server - not Apache :( We can't host example2.com's content in example1.com's file system. These are two very different platforms.

    Read the article

  • Too many connections to Sql Server 2008

    - by Luis Forero
    I have an application in C# Framework 4.0. Like many app this one connects to a data base to get information. In my case this database is SqlServer 2008 Express. The database is in my machine In my data layer I’m using Enterprise Library 5.0 When I publish my app in my local machine (App Pool Classic) Windows Professional IIS 7.5 The application works fine. I’m using this query to check the number of connections my application is creating when I’m testing it. SELECT db_name(dbid) as DatabaseName, count(dbid) as NoOfConnections, loginame as LoginName FROM sys.sysprocesses WHERE dbid > 0 AND db_name(dbid) = 'MyDataBase' GROUP BY dbid, loginame When I start testing the number of connection start growing but at some point the max number of connection is 26. I think that’s ok because the app works When I publish the app to TestMachine1 • XP Mode Virtual Machine (Windows XP Professional) • IIS 5.1 It works fine, the behavior is the same, the number of connections to the database increment to 24 or 26, after that they stay at that point no matter what I do in the application. The problem: When I publish to TestMachine2 (App Pool Classic) • Windows Server 2008 R2 • IIS 7.5 I start to test the application the number of connection to the database start to grow but this time they grow very rapidly and don’t stop growing at 24 or 26, the number of connections grow till the get to be 100 and the application stop working at that point. I have check for any difference on the publications, especially in Windows Professional and Windows Server and they seem with the same parameters and configurations. Any clues why this could be happening? , any suggestions?

    Read the article

  • Which Windows 8 tool should I use to "read", "upload", my Windows 7 latest backup DVD (is it possible?)

    - by Robert
    Which Windows 8 tool should I use to "read", "upload", my Windows 7 latest backup DVD (is it possible?). I've just installed W8 and haven't made any changes to my new ecosystem and, what happened was that, as I was managing my new drivers, some mess* occurred, I confess, and now what I have left is every single backup tool I made use of W7, like system images, restore dvds, backup up to date monthly and so on, and would like to keep in touch with W8. I'm one of those with problems managing the amd switchable gpu drivers. Now I want to stay with W8 (download version - didn't clean install) but with my old personal files. I don't care to programs updates. I got everything original on dvds, of my interest. Yesterday I tried refreshing W8 once but didn't work. Maybe trying again tonight. What would you guys do in my place, please? *the mess I am talking about is to have disabled my intel (the only driver left) gpu in device manager tool in W8. I got black screen on system boot. Cheers, C.C.

    Read the article

  • Seeking faster access/transfer times for accounting application

    - by Markaway
    Our accounting software, Sage 50, has been getting slower to open on workstations and reading the company file. The company file only contains 2 years worth of transactions, and we just cleared out 2011 so the file size has gotten a lot smaller. There are 10 users, 6 of which are on it all day, 4 are on and off throughout the day. Our network is entirely GbE and the switches are set to prioritize traffic on that port number. Watching network traffic, we barely use 40% of the network capability on the workstation, so I don't think that is our bottleneck. Our server contains two older Raptors Sata 2(3GB/s) 150GB in RAID 1. We were considering switching to SSD's, but a lot of what I read says to stay away from MLC's, especially for production environment and definitely avoid putting them in a RAID config. So would upgrading to newer Raptors with SATA 3(6GB/s) offer noticable benefits? What other options are out there that aren't so expensive? Trying to keep it to 200-300 per drive. We need at least 150GB, but going to 250-300GB would be better as it gives us more room to grow. We have about 30% space remaining on what we have now.

    Read the article

< Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >