Search Results

Search found 12007 results on 481 pages for 'usb speed'.

Page 197/481 | < Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >

• Dialing into multiple PPP connections on Ubuntu

  - by sharjeel

  I have multiple 3G USB based Modems. I would like them to keep connected simultaneously, NOT necessarily aggregating their bandwidth; a separate intelligent application would manage their utilization effectively. However I am running into problem of setting up proper routes for the ppp0,ppp1 interfaces: when one of them connects, other's entries in the routing table get updated so it is no more usable. If I reconnect the second one, it would override the first one's routing entries. If I do it over and over, sometimes both of them's entries disappear while in rare cases the two work well. I have tried it both using NetworkManager as well as WVDial but issue pops up in both of these. Perhaps both of them use same PPP dialer at the backend and thats why this issue appears. What is the proper solution to make them work together? In the long run, I'd also like them to automatically dial in once USB gets connected.

  Read the article

• Need to upgrade DDR2 RAM on HP Desktop

  - by jds

  I have this HP Pavilion Desktop. As you can see, that page says the memory speed supported is PC2-4200. It currently has a 512 MB stick - CPU-Z Screenshots: hxxp://i41.tinypic.com/j5clj6.jpg and hxxp://i39.tinypic.com/20tldlc.jpg However, a crucial.com scan gives a slightly different report - hxxp://crucial.com/systemscanner/viewscanbyid.aspx?id=5718CFE831D926C3 It says the system can support PC2-5300 memory. So my question is which one should I trust? I want to upgrade the computer's ram to 2 GB (the maximum supported), because XP Media Center is giving me problems and I will install Windows 7 on this. PC2-6400 is the most common DDR2 memory I have been able to find here in the market. Will it cause any problems if I install 2 × 1 GB PC2-6400 DDR2 memory sticks (in dual channel) in this computer, (afaik, it will just run at the lower speed of 533 MHz, or whatever the motherboard supports), or do I absolutely need to get PC2-4200 sticks?

  Read the article

• broken partition possible for recovery?

  - by claw

  I was using copywipe on hirens boot cd to copy a Windows installation to a new drive. unfortunately for me, I was rushing, I set the source drive as the USB drive running hiren/copywipe to the Windows partition, I think it has destroyed the partition tables and replaced with hiren boot USB ones. disk: was NTFS 40 / 250 partitions disk: now FAT32 145 / 145 partition I have used several partition recovery tools, diskdigger to name one, they all show a recovered partition, but its the hiren stuff. any advice would be a fantastic help To all that have similar issues I recommend using TestDisk (undelete partition) software. you can get this software as part of hirens boot cd. see answer

  Read the article

• How do I troubleshoot CanoScan LIDE20 on Ubuntu 9.10 in VirtualBox?

  - by kara-marfia

  This may be a VirtualBox question more than anything else. The host OS is Win7, which sees the scanner, but has no drivers for it. VirtualBox sees & recognizes the scanner as "Cannon Scan" and shows "state captured" when I hover over USB devices. Searching gives me many happy reports of this particular scanner being well supported, and that SANE should work with it immediately (also listedin the Supported Hardware List. I get "no devices available" from XSane... and I'm not sure where else I can check. I'd like to see if VirtualBox is telling the truth and find out if the USB port is actually being fed into the virtual OS. Can anyone point me in the right direction of where/how to do that in Ubuntu? Or other bright ideas. I'm starting with a little project to add some zing to my beginner linux studies - I'm sure I haven't checked some obvious things, because I don't know them yet. ;)

  Read the article

• Windows - Force Wi-Fi to N mode

  - by Frederick Marcoux

  I bought a month ago the D-Link DWA-160 Xtreme N Dual Band USB Adapter and I wonder about the speed. I have a 60Mbps but the speed is never above 300Kbps when I browse Internet or download something. Even from Microsoft or Apple (the fastest server I found). Now on Windows 8, we can see the Wi-Fi stats in Task Manager, there they are: Notice the red rectangle. The signal is 3/5 and I'm about 5 meters far from my router. An Apple Time-Capsule. Also, the connection type is 802.11g, I want N. I made this config in my Device Properties: Does anyone figured out to force the 802.11n in Windows? (Windows 8 preferably)

  Read the article

• Win7 backup fails with "The system cannot find the file specified" 0x80070002 - has worked before

  - by Thorbjørn Ravn Andersen

  I have a 500 GB USB-disk which has been used as a backup device for a few years now, but now fails without telling me why. This is a Dell box with Intel USB-controllers (so the NVIDEA problem does not apply here). I have previously had problems with a Git package marking a non-existent directory for backup (adding it make the backup succeede). The inaccessible boot partition problem described in Windows Backup fails with 0x80070002: "The system cannot find the file specified" does not apply to me. I would appreciate hints on where to look to identify why my backup fails so I can fix it.

  Read the article

• Connect a ssd externally such that hdparm is fully supported

  - by student

  I am just trying some hdparm magic with my new ssd (samsung 840 pro). However I don't want to change my drive over and over so it would be great if I could connect it externally to my laptop. I have a cheap sata-usb Adapter, but I feel it doesn't support the ATA commands send by hdparm. So what's the best way to do this? Are there sata-usb Adapters which fully support the hdparm things? Would it be a good idea to buy a sata-esata adapter to get full control over the drive?

  Read the article

• What affects video encoding speeds?

  - by Pig Head

  FRAPs doesn't compress its videos when you record, so the files are enormous. In a long recording you can get up to a few hundred gigabytes. Obviously, usually you would need to convert/compress them. What affects the speed of this? I don't think the RAM does, as when I converted 600 gb my RAM usage only went to 6 gig, but the processor was at 100%, which is surprising as I have a 6 core processor @ 3.46 ghz. Would clock speed or cores help the most?

  Read the article

• Nvidia 9 series or Intel HD 2000? [closed]

  - by EApubs

  I just tested an Nvidia 9300 GS card with a Intel Corei3 HD 2000 graphics system. Here is the windows experience index scores I got : Nvidia 9300 GS : Base Score 3.9 Processor : 7.1 Memory : 7.5 Graphics : 3.9 Gaming Graphics : 5.1 Hard Disk : 5.9 Intel HD 2000 : Base Score : 5.2 Processor : 7.1 Memory : 5.9 Graphics : 5.2 Gaming Graphics : 5.8 Hard Disk : 5.9 My questions are : When using Intel HD graphics, it reduces the score of my Ram! How is that possible? It checks the speed of the ram. Not the size (i think). Intel graphics take some of the ram space but how can that effect the speed? From both of them, what will be the good choice?

  Read the article

• Large file copy from NFS to local disk performance drop

  - by Bernhard

  I'm trying to copy a 200GB file from an NFS mount to a local disk. The local disk is an XFS filesystem on a LVM on top of a RAID 5 system (hardware RAID controler). I'm using rsync to monitor the transfer speed. At the beginning the IO speed is about 200MB/s, stable for the first 18GB. But then the performance drops by a factor of 10-20 and never recovers to the initial rate. Sometimes it reaches about 50-100MB/s but just for a few seconds and then the process seems to hang for a bit. At the same time all file-stat operations on the target filesystem are blocking for a long time (minutes). Also interrupting the copy process blocks for several minutes, a sub-sequent delete of the partly copied file takes also several minutes. Any ideas what could be causing this?

  Read the article

• What's the fastest way to store/access large files?

  - by philfreo

  I do a lot of video editing on my Mac and need a way to store very large (30 GB) files, and don't have room on my HD. A USB/Firewire external hard drive would work, but it seems way too slow for consistently working with such large files. I've also considered buying another computer, with a large hard drive, and putting it on the same network with a shared folder. What's the fastest / most efficient way to do this? Please consider USB 2.0 speeds, hard drive read times, ethernet speeds, etc. Are there other options I should consider?

  Read the article

• Windows PE 3.0 detect what device it was booted from

  - by Brian

  I am creating a custom boot disk for work using Windows PE 3.0. I need to be able to tell what drive the system was booted from. it may be a CD, or a USB Flash drive. In the past, I have looked for a file on the root of the drive that holds some of our custom configuration. however that is getting a bit messy. Basically, in addition to Windows PE, the drive or disk also has other scripts and tools. I need to remount that USB drive or DVD to the U:\ Drive, to keep thing consistent. Basically, Diskpart.exe Select Volume $X assign Letter=U Exit I just need to figure out how to determine that nasty little $X.

  Read the article

• Broadcom HT1100 SATA controller not working properly with 1TB drives

  - by Jeff C

  I've been using RHEL distro's for several years and always managed to find the answers until now. I know this is more of a hardware issue, but I've been working on this for over a week and trust Linux and the IT community to help more then HP. I have CentOS 6.3 installed on an HP ProLiant DL145 G3 server with the BroadCom HT1100 IO controller and ServerWorks SATA Controller MMIO BIOS v3.0.0015.6 Firmware. This controller does not support large drives fully. Here's what I've tried and the results; Stock setup - Freezes on the ServerWorks POST screen. Can't even enter CMOS without disconnecting the drives. If I simply disconnect the SATA cables before it gets to the ServerWorks screen and reconnect afterwards I can boot from a CD, USB, PXE fine. However fiddling with cables at ever boot isn't practical. If I enter the BIOS config I can set it to not try booting the drives but leave the controller enabled. This lets me boot normally but the drives are not visible in the OS (live CDs or USB installed). I used method #2 to install and update CentOS. I have the /boot partition on a USB drive (everything else is on the SATA drives in software RAID1) hoping that would work around the issue but I get this Kernel panic - not syncing:Attempted to kill init! Pid: 1, comm: init Not tainted 2.6.32-279.9.1.el6.x86_6 #1 Call Trace: [<ffffffff814fd6ba>] ? panic+0xa0/0x168 [<ffffffff81070c22>] ? do_exit+0x862/0x870 [<ffffffff8117cdb5>] ? fput+0x25/0x30 [<ffffffff81070c88>] ? do_group_exit+0x58/0xd0 [<ffffffff81070d17>] ? sys_exit_group+0x17/0x20 [<ffffffff8100b0f2>] ? system_call_fastpath+0x16/0x1b panic occured, switching back to text console I'm sure it should be possible to talk to the drives without the BIOS boot check since the BIOS doesn't see them in method #2 either, their disconnected when it checks, but Linux sees them fine. If anyone could help figure out how I would greatly appreciate it! The other possible option I've come across is a complex firmware update. Tyan has a few boards on their website with the HT1100 and a ServerWorks v3.0.0015.7 update which says "adds support for TB drives" in the release notes. If someone could help me get the Tyan SATA firmware into the HP ROM file so I could just reflash that would also be very much appreciated. Thanks for any help you guys can offer!

  Read the article

• Bootable and remote controllable imaging software?

  - by stefan.at.wpf

  I am looking for an imaging software, that one can boot from CD or usb stick (therefore without installing anything on the system!) and then control by some kind of remote desktop. So something like a combination of Acronis TrueImage's Bootable Media and Windows Remote Desktop. I don't even need to be able to store the backup on a network drive, as an external usb hdd is attached for these purposes. Background: A system that is normally controlled by SSH / command line and therefore has no keyboard/mouse connected that I could use to control Acronis TrueImage.

  Read the article

• Portable and Secure Document Repository

  - by Sivakanesh

  I'm trying to find a document manager/repository (WinXP) that can be used from a USB disk. I would like a tool that will allow you to add all documents into a single repository (or a secure file system). Ideally you would login to this portable application to add or retrieve a document and document shouldn't be accessible outside of the application. I have found an application called Benubird Pro (app is portable) that allows you to add files to a single repository, but downsides are that it is not secure and the repository is always stored on the PC and not on the USB disk. Are you able to recommend any other applications? Thanks

  Read the article

• How to identify cause of system lock on debian squeeze?

  - by David Sanders

  I have a desktop system at work with debian squeeze installed. Every couple days or so, when I come in in the morning, the system appears to be asleep and won't wake up. I suspect it goes into power save mode and then doesn't receive the wake up signal when I click the mouse or touch the keyboard. Does anyone know where I should look in order to start tracking this down? Like log files, etc? I doubt it, but maybe the fact that I'm using a mac aluminum usb keyboard and a wireless usb mouse (that has an off switch) has something to do with it? Maybe, when I turn my mouse off at the end of the day, the system loses track of the device somehow? I dunno :P. Thanks in advance.

  Read the article

• Software for capturing still image snapshots from video input

  - by cantabilesoftware

  What software is available that will let me watch video from a USB video capture device at full PAL/NTSC resolution and capture a still image at a button press? More info: I'm using a KaiserBaas USB capture device (http://www.kaiserbaas.com/kaiser-baas-product-page/converters/video-to-dvd-maker), and want to capture screen shots from a PS2 connected to it. I'd like to play the game at the full PS2 resolution and capture certain scenes. The device has a one-touch snapshot button on it, but I can't seem to make it work and there's no mention of it anywhere in the documentation. The device works and the video appears in Power Producer (the included software), but I think it previews it smaller than the full resolution. I could print screen it, but having to crop will be a pain.

  Read the article

• 32 vs 64-bit software for same machine?

  - by GorillaSandwich

  What is the difference between 32 and 64-bit software? My understanding is that 64-bit can use more RAM, if it's available, because it has a larger address space for it. Is this correct? And, specifically: If I have a 64-bit operating system with lots of RAM, and I install, say, the 32-bit version of MySQL instead of the 64-bit version, will it be unable to use all the available RAM and therefore run slower than the 64-bit version might on the same machine (assuming RAM becomes the bottleneck before processing speed or disk access speed or whatever)? If I have a 32-bit operating system and I install a 64-bit piece of software on it, will it (probably) fail to run?

  Read the article

• Sync Music to External Hard Drive with Windows Media Player

  - by dtbarne

  I'd like to sync my music from my internal hard drive to an external hard drive. Windows Media Player doesn't recognize my USB external hard drive as a syncable device. If I plug in any USB flash drive, it shows up as a device, but I can't seem to get it to recognize my external hard drive. Per some googling suggestions, the only suggestion I came across was to try enabling the "Portable Device Enumerator" service, but that yielded no luck. Is there any way to sync my music from WMP to an external hard drive?

  Read the article

• my WD Mybook wd5000h0032 is DEAD?

  - by Herudae

  Hello, i have a WD Mybook Premium (wd5000h032) it used to work just fine but suddenly i can't access to it. The blue lights turn on but the drive doesn't start, it makes no click, nor any other sound, it just like if it was disconnected from USB, of course my PC doesn't detect it, i've tried with trhee different USB cables two PCs and one laptop and nothing. Is it really dead? how can i recover the information stored there? i think the problem could be the case, if so, could i take out the disk and connect it as an internal drive? or could i buy another case?

  Read the article

• Flash stream makes my internet slow and cpu rush

  - by user1225840

  When I try to watch a live Flash stream, my CPU usage goes up to 75% and my Internet speed goes down. If I run a test before the video-stream, my speed is ~40/10Mbps and during the stream it drops to 0.1-0.5Mbps. The stream is laggy and I can only watch one to two seconds at a time, start/stop/start/stop. I have cleared my history, cache, cookies, temp files, and so on. I have searched for malware and took care of that. I have updated my drivers, reinstalled Flash and everything else I can think of, but it remains slow. I had this problem before and it just started working normally from one day to another. Could it be a hardware problem?

  Read the article

• Windows 8 install shows NTFS partition but asks for driver

  - by Guillermo Orellana Ruiz

  I have an Asus Eee PC 900HA, and I tried to install Windows 8 on it, so I created a 56GB NTFS partition and booted install from USB When I get to install it, says "some drivers are missing", but when I click Explore button, I can see the NTFS partition. I have updated the BIOS to its lastest version in Asus Support, loaded setup defaults, downloaded all the drivers I saw there and put them into the USB, but keeps asking for drivers. The BIOS has no option for the HDD to be IDE or AHCI, only Auto, ARMD and CDROM are available. Thank you very much.

  Read the article

• RAID--0 " TWO " DRIVES SSD ONLY Should I use on-board / Software RAID OR a RAID Card / Control

  - by Wes

  I am looking at going with a TWO Drive Only SSD RAID-0 Configuration And was wondering if I would get better performance / Speed from the Use of a RAID Controller / Card Verses just using the Software RAID on my Mother Board. I have herd conflicting reports , Again I only Plan on Running " 2 " SSD Drives in RAID-0 Config I have No- problem spending the extra money for a good controller but only if I am going to benifit performance wise , Otherwise if there is no notable Gain I will just use the Software RAID that my HP-180-T came with Intel- 3.33 GHZ , 6-Core , 12-GB of DDR-3. I have a huge External drive for All Storage and am not concerned about Data loss just looking for pure speed. And if a Controller will benifit my performance Wht type of card would one suggest?

  Read the article

• Computer turns off and on after start ..then goes dead

  - by Shiki

  I built a new PC from the following components: - CPU: Intel Core i7 950 - MB: Gigabyte X58A-UD3R - RAM: 2x2gb i7 Corsair memory - VGA: Zotac AMP2 GTX260 - HDD: 1 GreenSATA HDD (Western Digital 500gb RE2) When I turn it on, it goes for a few seconds, fans at maximum speed, then turns off. The again, it starts by itself.. and goes with fans on max speed, nothing happens. First I suspected my PSU. It's a Chieftec 450AA PSU. After I borrowed a Chieftec 550AA PSU, I tried to start with that. Exact same story. Any idea ? Do I need a bigger PSU? Reason why its not localized. I never seen this turn on, off, on. If you give answer for that, it would already help people like me, with the same problem.

  Read the article

• How should I troubleshoot a problematic wireless connection on Linux?

  - by Gearoid Murphy

  I recently purchased a netgear 150 usb wireless dongle for use with my 11.10 Xubuntu amd64 system. Using the network-manager interface, I can see local wireless networks and enter the authentication details for my local wireless lan. Unfortunately, the connection does not seem to work, I keep getting notifications that my wireless has disconnected (but none indicating that I've connected). When I examine syslog, it seems to indicate that I've successfully associated with the wireless switch and that dhcp has successfully acquired an ip address but the log shows that the dhcp process keeps sending requests, eventually dropping the connection. 'ifconfig wlan0' never shows the dhcp address logged in syslog. I suspect that the problem lies with the usb dongle, my configuration or the wireless switch but I am not certain how to isolate the problem, can anyone provide some insight on how I should go about homing in on the cause of this problem or verifying the functionality of the individual components, thanks.

  Read the article

< Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >