Search Results

Search found 14975 results on 599 pages for 'garnet os'.

Page 199/599 | < Previous Page | 195 196 197 198 199 200 201 202 203 204 205 206  | Next Page >

  • 12.04.1 no audio through HDMI

    - by JoJo
    having a bit of an issue with getting audio to go through HDMI. Here are the base specs: OS: Ubuntu Desktop 12.04.1 x64 CPU: AMD A10-5800K 3.8G 4M FM2 R Mobo: MSI FM2-A75MA-E35 OS: Ubuntu 12.04.1 LTS Vid Card: (integrated on CPU) AMD Radeon HD 7660D HDMI sound works fine under Win7 (after mobo and vid drivers are installed), so it's not physically broken. Audio through the normal headphone jacks works fine under Ubuntu. Looking at the audio panel, there is no HDMI output at all. aplay -l also reports only: card 0: Generic [HD-Audio Generic], device 0: ALC887-VD Analog [ALC887-VD Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 In additional drivers there are two versions: ATI/AMD PROPRIETARY FGLRX GRAPHICS DRIVER ATI/AMD PROPRIETARY FGLRX GRAPHICS DRIVER (post-release update) The first installs, but problem persists. I do get more resolutions to pick from. Second version does not, reporting it failed installation and to find details at: /var/log/jockey.log Looked at the log, and it's insanely long, if necessary I can get it to you guys. Did more research and some had luck by manually installing the drivers, so tried to give that a shot by following this: https://help.ubuntu.com/community/BinaryDriverHowto/ATI#Manually_installing_Catalyst_12.6 starting at 3.1 Manually installing Catalyst 12.6. I immediately had 2 issues, (1) the AMD website does not provide any drivers for Linux, and (2) the following command did not work: sudo sh amd-driver-installer-12-6-x86.x86_64.run --buildpkg Ubuntu/precise sh: 0: Can't open amd-driver-installer-12-6-x86.x86_64.run Some other posts stated to update "alsa-drivers", but that also did not work as install command for the new version of them did not work. I forget the exact issue, but similar to above, cannot open / cannot find. Any help would be greatly appreciated!

    Read the article

  • Can't boot into windows7/ubuntu 12.04 after running boot-repair

    - by Rini
    I have installed Ubuntu 12.04 on my preinstalled windows 7 Sony vaio E series laptop following instructions here: http://www.linuxbsdos.com/2012/05/17/how-to-dual-boot-ubuntu-12-04-and-windows-7/ Everything went well and I am able to boot in to windows after complete installation of Ubuntu. Now following instructions on web I tried to add Ubuntu to my BIOS using Easy BCD (but forget to add windows 7 entry). As a result, I loose windows 7 OS and can't boot in to either OS then I successfully repaired windows 7 using recovery CD. Now my problem is that I can't reinstall Ubuntu 12.04 using Live CD it halts every time before disk partition step giving error. "ubi-partman crashed". "ubi-partman failed with exit code 141. further information may be found in /var/log/syslog. Do you want to try running this step again before continuing? If you do not, your installation may fail entirely or may be broken." and, any choice to continue will result in the same error. After that following some post solutions I ran boot-repair commands in terminal ( in Try Ubuntu mode) and got the following URL: http://paste.ubuntu.com/1206434/ Now, after restart I can't boot into either Windows or Ubuntu. Even any attempt to run Windows repair is failed and I got the message : 'No operating System found' I don't know what went wrong after running boot-repair command. Please help in solving this issue. Thanks and Regards, R Shukla

    Read the article

  • How can I force Parallels' networking to obtain an IP through a wireless router?

    - by RLH
    Here is my setup. I have a Macbook, Thunderbolt display and an Ethernet connection plugged into the Thunderbolt display. During the day, most of my network use can (and should) operate across the ethernet associated with my display. However, I also need to be able to connect up to a wireless router. This hasn't been a problem on the Mac OS X side, but the program that I need to run on the router has to obtain an IP address from the wireless access point. Considering my current setup, how can I leave it so that I can access the internet in OS X, yet have my Window 7 instance running in Parallels, get it's assigned IP address from a wireless router that my Mac is also connected to? I've fiddled around with the Parallel's network settings for an hour, and I can't get Parallel's to see the router, even though my Mac is certainly connected to it.

    Read the article

  • No Clipboard support in Windows Phone 7 Series &ndash; iPhone points laughs

    - by Sarang
    What exactly were you taking of late MSFT? So much for a spanking new mobile OS which wants to emulate the iPhone OS so badly that it even copied and pasted the iPhone’s erstwhile lack of clipboard support as well? The reason given is so lame (shall I say differently able?) that deserves pity rather than lament. According to MSFT people don’t use the clipboard that often. Being a WinMo user for the better part of my life and having developed for the platform for worse part of it I could say with conviction that Clipboard support was one key differentiator which kept me away from “The Phone to have” of 2007-8-9. Let me try to find few use cases I for one have been using the clipboard. Copy files to and from card and phone memory. Copy images, audio files from apps/browsers/explorer to email other apps. Copy text to/from word documents, notes and emails. Copy content from network drives to memory card. Copy links between browsers (Yes i did it for the love of Opera and PIE alike). Others could definitely come up with more. So who are these so called “users” who provided feedback to MSFT that the clipboard is useless? If you are among the lucky few being asked for the “feedback” kindly chime in the comments. Would be interesting to see different views on this. Technorati Tags: Windows Phone 7 Series,Clipboard

    Read the article

  • Building a new cluster for mathematical calculations (Win/Lin)

    - by Muhammad Farhan
    I would like to build a new cluster to perform heavy mathematical calculations in Matlab and Abaqus. One of my friend told me that distributed computing is way faster than parallel computing, which is very true after reading a bit on the internet. However, I have never clustered before. Current workstation I own: Dell Precision T5400 2 x Intel Xeon 2.5 GHz 16 GB RAM (2GB x 8) 1 x Western Digital 1TB HDD 7200 rpm 1 x nVidia Quadro FX4600 768MB GPU 1 x 870W PSU OS: Windows 7 Ultimate 64-bit 2nd WS: I can buy another WS similar configuration to the one I own I am not bothered about OS, I am willing to cluster with either Windows or Linux. However, my software are compatible with windows 64-bit only. Please help me setup a cluster. Thank you.

    Read the article

  • Abierta la temporada Otoñal de Eventos en Oracle

    - by Sofia Santos
    Muchas son las sorpresas que hemos preparado para los próximos meses. Con mucha ilusión, desde Oracle os enseñaremos TODO lo que hay de nuevo en Aplicaciones y sí, para todos los gustos!!! Para empezar y estar al tanto de todo, debéis guardar esta URL: events.oracle.com. Allí encontraréis lo último en eventos Oracle, desde el internacional y espectacular Oracle Open World, hasta los eventos que estamos realizando por toda Europa. Una atención especial para los eventos de España: Oracle Customer Experience y Oracle Citizen Experience, 10 de Octubre, no lo puedes perder!!! Hay que inscribirse ya porque las plazas son limitadas y ya tenemos mucha gente inscrita. Más sobre Oracle Customer Experience aquí. En Octubre también estamos preparando unos desayunos exclusivos sobre Oracle DRM y no sólo para Madrid, en Barcelona también podéis asistir… Llega Noviembre y a principios de mes, tenemos dos eventos Exclusivos, uno es el Oracle Aplications Strategy Day, un evento en el que se atiende sólo por invitación y dónde hablaremos de estrategia además de hacer una entrega de premios a nuestros clientes de Aplicaciones. El segundo es el Oracle HCM Summit que tiene lugar en París, un evento único especialmente dedicado a los Directores de Recursos Humanos. El Oracle Performance Management Summit se realiza en el día 20 de Noviembre. Se trata de un evento dedicado a los Directores Financieros y que viene con nuevo formato que engloba una sesión plenaria, mesas redondas (Solvencia, Fatca, Planing y Cierre), además de los testimonios de nuestros clientes en vivo, listos para contestar vuestras preguntas. Hay que esperar unos días y ya veréis la agenda publicada… Nos quedamos por aquí, porque toda la pagina no llegaría para exponer todo lo que vamos a hacer. No dejes de inscribirte, nuestros eventos son gratuitos pero como siempre… las plazas son limitadas. Allí os esperamos!!!

    Read the article

  • How to resolve "HTTP/1.1 403 Forbidden" errors from iCal/CalDAV server after upgrade to Snow Leopard Server?

    - by morgant
    We recently upgraded our Open Directory Master & Replica to Mac OS X 10.6.4 Snow Leopard Server. We had a mismatched server FQDN & LDAP Search Base/Kerberos Realm, so we exported all users & groups, created the new Open Directory Master w/matching FQDN & Search Base/Realm, reimported users & groups, and re-bound all servers & workstations to the new OD Master. At the same time as all of this, we upgraded our iCal/CalDAV server to Mac OS X 10.6.4 Snow Leopard Server. Ever since doing so, we've seen the following issues with our iCal/CalDAV server and iCal clients on both Mac OS X 10.5 Leopard & Mac OS X 10.6: If a user attempts to move or delete an event (single or repeating) that was created prior to the upgrade to 10.6 Server, they get the following error: Access to "blah" in "blah" in account "blah" is not permitted. The server responded: "HTTP/1.1 403 Forbidden" to operation CalDAVWriteEntityQueueableOperation. New users added to the directory get the following error when attempting to add their account to in iCal's preferences: The user "blah" has no configured pricipals. Confirm with your network administrator that your account has at least one CalDAV principal configured. Interestingly, we've since discovered that users seem to be able to delete individual events from an old repeating event without error, but that's a massive amount of work to get rid of a repeating event. I will note that we have not yet added an SRV record in DNS as instructed on page 19 of iCal_Server_Admin_v10.6.pdf. Further Investigation: In this particular case, a user is attempting to decline repeating events created prior to the upgrade to Snow Leopard Server. Granting the user full write access with sudo calendarserver_manage_principals --add-write-proxy users:user1 users:user2 (which did work) doesn't allow deletion of the events. Still get the usual error: Access to "blah blah" in "blah blah" in account "blah blah" is not permitted. The server responded: "HTTP/1.1 403 Forbidden" to operation CalDAVWriteEntityQueueableOperation. The error that shows up in /var/log/caldavd/error.log on the iCal Server when attempting to delete one of the events is: 2011-03-17 15:14:30-0400 [-] [caldav-8009] [PooledMemCacheProtocol,client] [twistedcaldav.extensions#info] PUT /calendars/__uids__/XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX/calendar/XXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX.ics HTTP/1.1 2011-03-17 15:14:30-0400 [-] [caldav-8009] [PooledMemCacheProtocol,client] [twistedcaldav.scheduling.implicit#error] Cannot change ORGANIZER: UID:XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX And the error in /var/log/system.log on the client is: Mar 17 15:14:30 192-168-21-169-dhcp iCal[33509]: CalDAV CalDAVWriteEntityQueueableOperation failed: status 'HTTP/1.1 403 Forbidden' request:\n\nBEGIN:VCALENDAR^M\nVERSION:2.0^M\nPRODID:-//Apple Inc.//iCal 3.0//EN^M\nCALSCALE:GREGORIAN^M\nBEGIN:VTIMEZONE^M\nTZID:US/Eastern^M\nBEGIN:DAYLIGHT^M\nTZOFFSETFROM:-0500^M\nTZOFFSETTO:-0400^M\nDTSTART:20070311T020000^M\nRRULE:FREQ=YEARLY;BYMONTH=3;BYDAY=2SU^M\nTZNAME:EDT^M\nEND:DAYLIGHT^M\nBEGIN:STANDARD^M\nTZOFFSETFROM:-0400^M\nTZOFFSETTO:-0500^M\nDTSTART:20071104T020000^M\nRRULE:FREQ=YEARLY;BYMONTH=11;BYDAY=1SU^M\nTZNAME:EST^M\nEND:STANDARD^M\nEND:VTIMEZONE^M\nBEGIN:VEVENT^M\nSEQUENCE:5^M\nDTSTART;TZID=US/Eastern:20090117T094500^M\nDTSTAMP:20081227T143043Z^M\nSUMMARY:blah blah^M\nATTENDEE;CN="First Last";CUTYPE=INDIVIDUAL;ROLE=REQ-PARTICIPANT:urn:uuid^M\n :XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX^M\nATTENDEE;CN="First Last";CUTYPE=INDIVIDUAL;PARTSTAT=ACCEPTED:mailto:user@d^M\n omain.tld^M\nEXDATE;TZID=US/Eastern:20110319T094500^M\nDTEND;TZID=US/Eastern:20090117T183000^M\nRRULE:FREQ=WEEKLY;INTERVAL=1^M\nTRANSP:OPAQUE^M\nUID:XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX^M\nORGANIZER;CN="First Last":mailto:[email protected]^M\nX-WR-ITIPSTATUSML:UNCLEAN^M\nCREATED:20110317T191348Z^M\nEND:VEVENT^M\nEND:VCALENDAR^M\n\n\n... response:\nHTTP/1.1 403 Forbidden^M\nDate: Thu, 17 Mar 2011 19:14:30 GMT^M\nDav: 1, access-control, calendar-access, calendar-schedule, calendar-auto-schedule, calendar-availability, inbox-availability, calendar-proxy, calendarserver-private-events, calendarserver-private-comments, calendarserver-principal-property-search^M\nContent-Type: text/xml^M\nContent-Length: 134^M\nServer: Twisted/8.2.0 TwistedWeb/8.2.0 TwistedCalDAV/2.5 (iCal Server v12.56.21)^M\n^M\n<?xml version='1.0' encoding='UTF-8'?><error xmlns='DAV:'>^M\n <valid-attendee-change xmlns='urn:ietf:params:xml:ns:caldav'/>^M\n</error> One thing I have noticed, and I'm not sure if this has any real effect is that in many of these pre-Snow Leopard Server migration events, the ORGANIZER is specified like the following: ORGANIZER;CN=First Last:mailto:[email protected] But newer ones are more like one of the two following: ORGANIZER;CN=First Last;[email protected];SCHEDULE-STATUS=1 ORGANIZER;CN=First Last;[email protected]:urn:uuid:XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX iCal_Server_Admin_v10.6.pdf notes that the ".db.sqlite" files are completely disposable, they're merely a performance cache and are re-built on the fly, so are safe to delete. I did delete the one for the organizer's calendars and it took longer to process the attempted event delete while it rebuilt the database, but still errored out in the end. FWIW the error is thrown by this code: https://trac.calendarserver.org/browser/CalendarServer/trunk/twistedcaldav/scheduling/implicit.py Any further suggestions? I see lots of questions about this in my Google searches, but not solutions and this is a widespread problem on our iCal Server. Now, we mostly try to get users to ignore them (hence the amount of time this question has been open), but every now and then I dig in deeper trying to find the culprit and/or solution.

    Read the article

  • Windows 7 "Not Responding"

    - by sizeight
    At my office we've got 2 Dell XPS M1530 laptops. Both have been running up to date installations of Windows 7 with NOD 32 Anti Virus for months now with no problems. Last week however both started freezing with "Not responding" issues every few minutes when browsing the web. It doesn't matter which browser, the latest versions of Firefox, Chrome and IE8 all do the same. After a few minutes the browser "wakes up again" but freezes again very soon. I suspect it's an OS update issue, a driver/OS conflict or something. Anybody got a solution for this?

    Read the article

  • how to optimize virtual box shared folders

    - by Nrew
    This is really pissing me off. No matter how much memory I put into the guest os(windows xp). It still hangs for about 365 days before you can access the file you want to access from the shared folder. What do I do to make things faster? Because after it hangs and not respond for 365 days. It will do it again for another 250 days. Ive even set the shared folder to permanent. This is a fairly decent machine: 2.50ghz processor(x64 architecture, but I have only 2Gb of memory so my host os is just 32 bit windows 7) hdd has much space left: 156 Gb free of 250Gb

    Read the article

  • Hybrid Graphics on Windows 7/Ubuntu 12.04 Dual Boot

    - by Noob.
    Alright, so here's the situation: I am using an ASUS UL80VT with two graphics cards: Integrated intel graphics and NVIDIA G210M I was running an Ubuntu 12.04 - Windows 7 dual boot (on separate partitions).The machine worked perfectly (including the display drivers) without me needing to install anything special or change any settings. However, my hard drive was corrupted and I lost all my data yesterday, so after it was replaced, I installed Ubuntu 12.04 64x again after installing Windows 7. I booted up Ubuntu after installation, and noticed it was by default using Unity 2D... Gnome 3.4 wasn't working properly either, so I guessed that the NVIDIA G210M driver wasn't installed/working and the OS was instead using the integrated graphics. I checked the "Additional Drivers" thing, but there were no proprietary drivers listed there, so I went to the NVIDIA website, downloaded the driver directly and installed it. I restarted, but there was no change. After this, I read somewhere that I should change my SATA in the BIOS to "Compatible" rather than "Enhanced". This worked fine and fixed the problem (both Unity and Gnome were working perfectly) but then when I tried booting up Windows 7, I recieved the BSOD. So I changed it back to Enhanced, and once again, the NVIDIA 210M graphics isn't working on Ubuntu, but on Windows 7 it is. I do not want to keep changing from Enhanced to Compatible every time I reboot to Ubuntu and neither do I want to simply just use one OS. Note that NVIDIA 210M and integrated graphics work perfectly on Windows 7. Also, I don't care about switching between them, I just want to be able to use the NVIDIA one. What can I do so that both Windows 7 and Ubuntu work and NVIDIA G210M works on Ubuntu?

    Read the article

  • Weird problem, special characters coming after formatting the hard drive, computer isn't starting 0_

    - by m3taspl0it
    Hya friends , Last night my computer was working fine. But today when i came back from college and started it , it was starting fine but after sometime it's getting restarted , again and again getting restarted at different points , so i tried to boot it in safe mode but same problem. Now after all this , i finally decided to format the drive C (it is in 80 GB) and load new OS windows XP3. After formatting (quick format) and loading xp3 sufficient files , when it was getting rebooted for copying the actual os files , it hung and a weird screen came. I've also attached the pic of error : http://www.postimage.org/image.php?v=gxz1vKS My specs : P4 3.0 Ghz 2 GB RAM (2x 512 mb and 1 GB) 3 hard drives { 80 GB (5 years old around) 320 GB ( 2 years old around) 500 GB ( recently bought) 256 MB graphics card any help is very appreciated , thanks

    Read the article

  • How do I do a cross-platform backup/restore of a DB2 database?

    - by Pridkett
    I need to dump a couple of databases from DB2 for Mac and DB2 for Linux and then import the databases to DB2 for Windows. Unfortunately, when I try the standard backup and restore I get the following error: SQL2570N An attempt to restore on target OS "NT-32" from a backup created on source OS "?" failed due to the incompatability of operating systems or an incorrect specification of the restore command. Reason-code: "1". I've seen references to DB2 needing an IXF dump and import, but I can't find any solid information about how to do this without dozens of other steps. Any hints on how to do this in the least painful manner?

    Read the article

  • Enable Hardware Virtualization on HP CompaqDX2420?

    - by 7alwagy
    Hey Guys, After installing vmware7, I tried to run a virtual machine with Mac OSX installed. When I tried to run this virtual machine I got an error message saying: Mac OS X is not supported with software virtualization. To run Mac OS X you need a host on which VMware Workstation supports hardware virtualization. I'v googled and found out that my processor (Intel Core 2 Duo E7500 Processor (2.93 GHz, 3 MB L2 cache, 1066 Mhz FSB)supports Hardware virtualization. Does anyone know how to enable this in order to get this virtual machine running?

    Read the article

  • Is it possible to rent a virtual instance of Windows/XP/Vista/7 in the cloud on pay as you go basis?

    - by Janusz
    I am a software developer and I need to test my software on different OS all the time. I am using free VPC images from IE6 compat kit from Microsoft but they have only limited options of Windows Versions (Win XP SP3 and some restricted version of Vista). I need a service where I could rent a Virtual OS in the cloud and connect via Remote Dektop. Use for couple of hours and then discard all the stuff I have been doing there. I tried using Amazon S3 but they only have Windows Server 2003 Anyone knows of such a service that would offer different XP/Vista/7 versions ?

    Read the article

  • Load-balance with LAN and Wi-Fi

    - by Synox
    I have a Mac, which runs Mac OS X 10.6 or Ubuntu 9.10 or Windows XP (Multiboot). Solution can be for any of the systems, whatever works better. I have two ISPs, one can be accessed via Wi-Fi, one can be accessed via LAN. In Mac OS X I can define the priority, which network to choose first. But what I wish to do is to load-balance with both networks. I don't want to buy extra hardware. I have some unused Wi-Fi routers if this would help. Compiling and configuring programms in Linux is no problem for me.

    Read the article

  • Prevent Win7 boot loader from taking over the WinXP boot loader

    - by Chris
    My setup: 1 physical hard drive (500gb divided equally into 2 partitions) Windows XP Partition (Current OS) Empty Partition where I will be installing Windows 7 My question is how do I prevent the Windows7 boot loader from taking over my WindowsXP boot loader when installing the new OS ? The reason I am asking is because I already have a ghosted backup of my WinXP partition and if I ever need to restore my xp partition using that backup, would it not overwrite the Windows7 boot loader that was placed in the XP partition with the one from the backup, thus making windows 7 unable to boot. Also what would happen if I decided to delete the Windows XP partition altogether somewhere down the road and along with it the Win7 boot loader that was placed there, wouldn't that cause the system not to boot at all.. To avoid these issues, I simply want to make sure that BOTH the Win7 and WinXP boot loaders are available on their respective partitions and they do not interfere with each other in any way. Is this possible? Thx, Chris

    Read the article

  • UEFI Boot Failure - Hang after Printing USB Information

    - by James
    I'm experiencing a really weird boot problem. With both 12.10 and 12.04LTS, the vast majority of kernels (and initrds) that I've tried boot, but hang immediately after printing out information about USB devices. This isn't exactly a full "hang" so to speak, as if I plug in a flash drive, I see information and a /dev/sd* entry printed to the screen. Post/pre-init scripts are not run, there is no handoff, nor busybox or VT prompt. Virtual terminals can't be changed (with Ctrl-Alt-Fx). For what I can see, init may have not been executed yet. With certain kernel and OS combinations however, (specifically 3.2.0-29), I get a full boot and am able to use the OS as if there is no problem. After 3.2.0-29, I've been hard pressed to find a kernel that works. Any idea what's happening or how to fix this? Or even a road to take? I've exhausted the first five pages of Google for every search term I can think of. This is a Lenovo Z580 (i5-3210M) with Phoenix SecureCore Tiano firmware, if that helps any.

    Read the article

  • How do I convert this filetype to pdf?

    - by Gnoupi
    This question is coming back often, and the general answers are very often the same. In an objective to concentrate useful information in one place, here is a community wiki about it. How can I convert this filetype to pdf? This question will have two kind of answers: The generic case, which works for most filetypes. The specific cases, which should be one answer per filetype. Restricting the OS field to Windows, as most of these questions are about this OS. This may change eventually. As it is community wiki, feel free to edit this question to improve it as well.

    Read the article

  • How can I recover [data from] my failing USB key?

    - by moe37x3
    I have a Corsair Flash Voyager USB key, and it's almost completely failed. When I plug it into my [WinXP] computer, the OS mounts it and open up explorer to the drive's root directory. However, if I try to copy any data off, I get an error message saying that the device is not there. If I leave it plugged in, the OS seems to oscillate between seeing it and not seeing it, since the "Safely Remove Hardware" tray icon appears and disappears every few seconds. The damage was probably caused by my abuse, either from plugging it in with my keys hanging off of it or from losing the cap and keeping it in my pocket uncapped. Is there anything I can do to save the data from it or even rehabilitate the drive?

    Read the article

  • How can I dual install Ubuntu 10.4 in a Mac Mini with 10.4.11?

    - by Marco Mariani
    I'd like to power-up my aging Mac Mini (1.5GHz Core Solo, 1GB RAM, Tiger 10.4.11) by installing a shiny Ubuntu alongside the current OS. After all, I use Ubuntu for everything save for cleaning my teeth. Since it's my first and only Mac and I have next to no experience with the OS (having used it basically as a media player) I am a little concerned about rEFIt, ELILO, Boot Camp and the fact that it's basically a 4.5 years old unsupported machine and I might get asleep reinstalling everything several times. I've used the live desktop-i386 CD and everything works. I tried with an external USB drive instead of a CD but couldn't make it boot. As for installing Ubuntu, the howtos I've found give several alternatives depending on the model, the OSX version, etc.. but they usually talk about newer machines. Which howto should I follow to repartition, and boot thereafter? Thanks

    Read the article

  • Lenovo B460e laptop Unknown filesystem

    - by Dinesh
    I got a Lenovo B460e laptop yesterday (given by the TN Govt). It has WINDOWS 7 Pro Set it up the way I liked it... all software drivers and all. I wanted extra drives, so I entered the WINDOWS diskadmin and changed my partition setup, by splitting and I did the partition setup in the installing proces, so I split my harddisk into 4 parts. So far so good. When I rebooted, I entered GRUB RESCUE MODE. In this mode I know the only command “ls”. Which gives like (hd0) (hd0,msdos5) (hd0,msdos4) (hd0,msdos2) (hd0,msdos1). This Lap does not have a CD drive, otherwise I could have formatted the OS and installed a new OS using WINDOWS 7 CD. Now I don’t know what I’m supposed to do. Any idea on how to fix this?

    Read the article

  • How to Configure a vm on the same machine to do remote desktop [closed]

    - by Varun K
    I want to achieve following: (Note I'd like to get this done first of all with Win7 as both host and vm OS) Install Windows 7/xp/Windows 8 VM on Windows 7/Windows 8 host machine Configure it so that I can connect to it via remote desktop. This is because I use a screen reader software and audio output directly from VMs is not highly responsive. My software has a feature that it can connect to its copy on the remote machine (during rdp session) and then start receiving the text description which it translates into audio on the client (host in this case) machine. I want to know: Which VM software can let me do this – VMWare/Ms Virtual PC or VirtualBox If it is possible with every VM software, could you give an example of how to do this with anyone of these 3? Specifically, I know how to install Windows on VM (on both VMWare/Virtual PC), but don't really know how to configure a network such that I can remote into that VM from host OS. Hope it clarifies what I'm trying to achieve.

    Read the article

  • Backup Linux Root Partition (Fedora 12)

    - by SomeNewbie
    I setup my partition scheme to have an extra partition the size of my / partion. I have a separate home directory partition. Essentially, I will be doing things that might make my OS unstable so I'd like to backup the OS state but without bothering my home directory. Can I just backup (maybe with dd?) my root partition to another partition on the HDD? I know to restore it I would have to boot up with a livecd or something and do the reverse procedure. I want this to be as simple and require the least amount of external hardware as possible.

    Read the article

  • VMware - Not printing in order

    - by nate
    I am using vmware workstation 7. Guest is Windows XP. The host OS is Windows 7. When I queue the printer with multiple documents, the printer doesn't print in order. It seems to print the smaller size in data of documents first. The printer is an HP printer. This is what I have tried so far: I have tested this on the host machine, and it works fine. I have tested this on other host machines(XP Windows7), and it works fine. I have tested other HP printers I have tested it another another guest OS Windows 7 I have tested different drivers Thanks in advance for any help on this one!

    Read the article

  • Is there a VNC server for mac with decent international keyboard support?

    - by Stephan
    Hi, I'm having trouble finding a VNC server for Mac OS X that allows me to connect from a Windows box with German keyboard layout. I've tried the built-in desktop sharing and several versions of Vine but all of them had problems with several keys. Does maybe anyone know about a working combination of a Mac OS X VNC server and Windows VNC client which properly supports a German keyboard layout on the client? Update: I don't think the Windows client is the problem, because I have no issues connecting to Linux boxes. And I've tried several different clients.

    Read the article

< Previous Page | 195 196 197 198 199 200 201 202 203 204 205 206  | Next Page >