Search Results

Search found 18728 results on 750 pages for 'setup deployment'.

Page 199/750 | < Previous Page | 195 196 197 198 199 200 201 202 203 204 205 206  | Next Page >

• how to completly turn my mac into a host, mail server?

  - by idaho

  i have mac osx 10.6.3 (snow leopard) i have already setup mamp so it acts like a local server. but the next thing i wanna try doing is making it into a mail server where i can register an email locally maybe something like myname@myip or however its done. then having the ability to setup mx records, cname, and all that dns good stuff. this will only be for education purposes so that i can fully understand how it all works. what do i need to do? i read something about MailServeSnow but i cant get its domain to work , it must be down. would this be the best option? also would i need mac server or my os would be just fine? thanks

  Read the article

• Dialogs appear on wrong monitor with SQL Server Management Studio 2008

  - by David

  I am running SSMS 2008 on Windows 7 with a dual monitor setup (one large, one small). SSMS is running on the secondary monitor, but everytime a dialog is opened, the dialog is placed on the primary monitor instead. I've tried moving the dialog over, closing it, and then re-opening it, but it doesn't remember and goes back to the primary monitor. This is really annoying for some of the designer dialogs, is there any way to fix this other than switching SSMS to the primary monitor? Is this a known bug with SSMS, or is it a problem with my particular setup?

  Read the article

• Cannot use `su` or `sudo` after set up key-based access to SSH

  - by OrangeTux

  I'm following this tuturial to setup key-based access to the SSH I created a user. I add copy the key to the client via ssh-copy-id <username>@<host> Becasuse ssh <username>@<host> still prompts for a password I run ssh-add on the local machine. The terminal doens't prompt for a password, I can login without using a password. But I cannot run su anymore. Every input for the password results in Authentication failure. I tried it again. But before coping the key, I added to the sudoer file. Copied key, ssh-add. But now I cannot login to my SSH shell att all? How can I setup a key-based SSH access with the possibiluty to use su or sudo?

  Read the article

• Should I choose KVM/XEN over OpenVZ or use them together?

  - by Krystian

  I've got a dual xeon e5504 server, with [for now] only 8GB of ram. Storage is'n impressive either: 3x 146GB sas in raid5 + 500GB sata drives. Currently it works as a development server, but it's over speced for our needs and since our development methods changed through last 2 years we decided it will work as a production system for some of our applications + we would like to have a separate system for testing/research. Our apps are mainly web apps deployed on tomcats [plural as some of the apps require older versions] and connected to Postgres. I would like to have a production system, where only httpd+tomcat+db are setup and nothing else runs there. Sterile system. Apart from that, I would like a test system, where I can play with different JVM settings, deploy my test apps, play with tomcat/httpd settings and restart them without interfering with the production system. Apart from that, I would like to be able to play with different linux flavors, with newer kernels to test how they work etc. I know, this is not possible with OpenVZ and I would have to choose KVM for that. I am thinking about merging the two, and setting up a KVM to be able to work with different systems [linux only to be frank] + use openVZ to setup separate machines for my development needs. I would simply go with that, but reading here and there about the performance impact full virtualization has over containers and looking at the specs of my server makes me think twice about it. I don't want to loose too much performance, especially because of the nature of my apps [few JVMs running at the same time]. It will be my first time with virtualization, apart from using desktop virtualbox/vmserver. Although I am a fast learner I don't want to mess with the main system so much that it will break the production apps or make them crawl. Although they are more or less internal apps and they don't produce much load, they need to be stable. I've read, that KVM host is a normal linux installation and it allows to run normal processes on it. If that is so, does it allow to run openVZ as well? I mean... can I have KVM and OpenVZ running on the same system/kernel? Or do I have to setup another system to run OpenVZ containers? How much performance impact can this have for me? Will my hardware suffice? oh and one more thing... unfortunately I'm quite limited with the funds... I'm looking for a free solution only :/

  Read the article

• How to move a windows machine properly from RAID 1 to raid 10? [migrated]

  - by goober

  Goal I would like to add two more hard drives to my current RAID 1 setup and create a RAID 0 setup on top of the two RAID 1 setups (which I believe is referred to as "RAID 10"). Components Involved Intel P68 Chipset Motherboard 4 SATA ports that can be configured for Raid An intel SSD cache that sits in front of the RAID, and a 64 GB SSD configured in that manner Two 1TB HDDs configured in RAID 1 OS: Windows 7 Professional Resources Consulted so far I found a great resource on LinuxQuestions.org for a good "best practices" process for Linux machines, but I'd like to develop a similar process that I know works on Windows Machines.

  Read the article

• Windows Server 2003 Router, Good approach [closed]

  - by jM2.me

  Possible Duplicate: Windows Server 2003 Router with PortForwarding Situation We have Verizon Fios 25/25 Internet Connection, Server acting as a router, and around 12 office computers. Task Portforward port 29000 from office computer. Problem Once I connected wan and lan cables I just had to set static lan ip (on server) and plug in switch with office computers into second nic. Then just right click on wan nic and select share internet connection. All office computers were assigned with an IP address 192.168.0.XXX and Gateway 192.168.0.1 (server). Now I have to open port and portfoward it from computer 192.168.0.190 (static ip, manual). Using this guide http://www.rosscode.com/blog/index.php?title=port_forwarding_in_windows_2003&more=1&c=1&tb=1&pb=1 I faced a problem. Before enabling "RRA" I had to unshare internet connection (wan interface) and was able to setup network. Now how do I setup a network within "RRA" and share internet with private network? Thank you much

  Read the article

• How can I set Qmail to relay all mail to one address

  - by MoSiAc

  I'm new to qmail it's setup and working like it should. I need to set it to do something a bit different. I need it to take all mail that would be incoming to it and relay all of that to one address as opposed to whatever address they could have possibly set it to. The idea is we have setup a test enviroment and we want no e-mails from a test server to actually go out to real people so this relay server will catch all of that outgoing mail and throw it into a test e-mail account inbox to check for errors and so forth. I'm honestly not sure if this is even possible so if it's not let me know now so I can come up with a different method to manage all these test e-mails. Thanks

  Read the article

• Extend university wifi network

  - by asfasdoiuh ouhouhouh

  i live in a university campus and i can get wifi signal on the outside of my window but not in the house. The solution i use at the moment is a usb wifi dongle outside connected to my laptop but the lack of an internal antenna make the connection quite unreliable at times. So i was trying to find another solution to improve the reception of my network. One idea is to setup a router on the outside (in a place with stronger signal) and redirect the connection inside the house with an ethernet cable but the problem is that our Uni Wifi is managed by a capitve portal (BlueSocket with DNS redirection to login page) and the authentication has to happen on the mac address that connect to the net (so the client appliance in this case). If I use a router with Mac-Clone capability i will be able to be redirected trough the captive portal on my laptop computer and login from there or i need to setup my router to fill in the login page by itself? There are other hardware/software solutions i can use to get what i want?

  Read the article

• Cannot usermod -L in LightDM scripts

  - by user95723

  I'm running Xubuntu 12.04 and use the LightDM. I want to restrict access to the machine as a kind of parental control. This is how it should work I hook in a script that executes just before the greeter comes up. Within that script some awk processing will read an entry in a config file and will trigger a usermod -L or usermod -U depending on whether the user is allowed to login. While user is logged, a cron job will count down the entry in the config and forces a xfce4-session-logout if time is up. A cron job running on a server will upload the "credits" on a daily base. How is this idea? That's theory, now for the problems It appears for some unknown reason, the usermod command is not executed, neither as part of a display-setup-script nor within the greeter-setup-script. I wrote a small sandbox script usermod -L johndoe 2error.txt touch /etc/blabla 2error.txt The script is executing, cause the blabla file is existing. That means that the script must have been executed with root privileges. error.txt is empty but the usermod command has just no effect. Is this a bug or a feature. What's wrong? Best regards and thank you Oli

  Read the article

• ADF page security - the untold password rule

  - by ankuchak

  I'm kinda new to Oracle ADF. So, in this blog post I'm going to share something with you that I faced (and recovered from) recently. Initially I thought if I should at all put a blog post on this, because it's totally simple. Still, simplicity is a relative term. So without wasting further time, let's kick off.    I was exploring the ADF security aspect to secure a page through html basic authentication. The idea is very simple and the credential store etc. come into picture. But I was not able to run a successful test of this phenomenally simple thing even after trying for over 30 minutes. This is what I did.   I created a simple jsf page and put a panel in it. And I put a simple el to show the current user name.  Next I created a user that I should test with. I named the password as myuser, just to keep it simple. Then I created an enterprise role and mapped the user that I just created. Then I created an application role and mapped the enterprise role to it. Then I mapped the resource, the simple jsf page in this case, to this application role. This way, only users with the given application role can only access this page (as if you didn't know this duh!).  Of course, I had to create the page definition for the page before I could map it to an application role. What else! done! Then I hit the run menu item and it all went well...   Until... I got this message. I put the correct credentials repeatedly 2-3 times. Still I got the same error. Why? I didn't get any error message during the deployment. nope.  Then, as I said before, I spent over 30 minutes trying different things out, things like mapping only the user(not the role) to the page, changing the context root etc. Nothing worked!  Then of course, I bothered to look at the logs and found this. See the first red line. That says it all. So the problem was with that password. The password must have at least one special character and one digit in it. I think I was misled by the missing password hint/rule and the fact that the deployment didn't fail even if the user was not created properly. Well, yes, I agree that I was fool enough not to look at the logs.  Later I changed the password to something like myuser123# . And it worked. I hope it helped.

  Read the article

• Windows 7 x64. Some 32 bit applications refuse to install.

  - by user250712

  I have been having problems lately when trying to install older games onto my PC. It is only with 32 bit applications. A few games that will not install are: Drakan: Order Of The Flame TA Kingdoms (Total Annihilation installed fine) Baldur's Gate. In Baldur's Gate, when I use autorun.exe and choose install, the autorun closes and the computer loads for a second (as it should) then nothing pops up. Ten minutes later still nothing, so I try again, still nothing. So next I use Setup.exe. Still nothing. I run it in every compatibility mode, and as Administrator in every mode, still nothing. Then I open Task Manager, and there are about 80 setup.exe processes running, all of them doing nothing and taking up next to no resources.

  Read the article

• Distributed filesystem for automated offline data mirroring

  - by Petr Pudlák

  I'd like to achieve the following setup: Every time I connect my laptop to a local network, my partition gets automatically mirrored to a partition on my local server. I only want to mirror what has changed from the last time. (I understand that it is not a proper backup solution since there is no history of the changes, it'd be more like a non-persistent network RAID.) Is there a distributed file system that allows such a setup? I've done some searching and it seems to me that most distributed file-systems are focused on data availability and distribution, not duplicating them. I'd be thankful for suggestions. Edit: Sorry, I forgot to mention: I'm using Linux.

  Read the article

• Unable to ping between subnets and out to internet

  - by battlemidget

  My setup is Modem - Linksys router - Laptop with 2 devices (wlan0/eth0) - desktop machine Router is 192.168.1.1 gateway to the internet Laptop wlan0 is 192.168.1.4 with a gw of 192.168.1.1 Laptop eth0 is 192.168.2.254 which acts as a second gateway desktop is 192.168.2.100 On laptop i've setup ip_forward to 1, and have inserted 2 iptables rules -A FORWARD -i eth0 -o wlan0 -j ACCEPT -A FORWARD -i wlan0 -o eth0 -j ACCEPT The laptop can ping outside the network (i,e, yahoo.com) it can not ping 192.168.2.100. The desktop can ping 192.168.2.254 but nothing outside the network or 192.168.1.0 subnet. On laptop ip route show lists: 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.254 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.4 127.0.0.0/8 dev lo scope link default via 192.168.1.1 dev wlan0 What am I missing to make my desktop go through the laptop in order to access the router which provides access to the internet? Thanks

  Read the article

• Running a home mail server using dynamic dns

  - by user4009

  Hi, Is it possible to run an email server on my home box using dynamic dns? The scenario is, I want to auto cc all incoming and outgoing emails from my one account to another, from some server side config instead of configuring email clients for rules. I have tried Google Apps Mail but it doesn't allow auto cc of outgoing emails. After having read tons of blogs, forum messages etc (hope I have been reading the correct info :) ) the only option to achieve what I am needing is to setup my own mail server, but the cost of getting a static IP doesn't fit my budget. Please can someone point me in the correct direction. Platform doesn't matter, I can setup a Windows or Linux server. Many Thanks

  Read the article

• Installing a personal security certificate for Windows Server 2008 Terminal Services user

  - by Rick

  We use StoneEdge Order Manager, which runs under Microsoft Access, on several Windows computers as well as through Terminal Services on Windows Server 2008. Terminal Services users are unable to process credit cards using the First Data Global Gateway on the server. We have followed the necessary setup instructions provided under the user account, which involves adding a certificate in the Internet Options control panel. The Windows XP desktops require this to be done, or a generic 'unable to connect' message is shown when attempting to charge a card. On the server, this message is shown regardless of whether the certificate has been installed. Is there anything else that needs to be done that is specific to Windows Server that is not mentioned in the workstation instructions? Setup Instructions

  Read the article

• Clone current host OS to a guest virtual machine.

  - by ProfKaos

  I would like to run a few repeated checks on a setup procedure I am documenting, to verify my document. I would like to somehow create a VM that replicates the environment on my machine, i.e. the host machine, onto a guest VM. Then I can use Windows' System Restore on the guest to start at the point before I commenced the setup procedure and repeat it as many times as required until no more trial-and-error etc. is required to supplement my document. I have Virtual PC and VirtualBox available to install as host environments, running on Windows 7 Professional.

  Read the article

• Remote access to internal machine (ssh port-forwarding)

  - by MacUsers

  I have a server (serv05) at work with a public ip, hosting two KVM guests - vtest1 & vtest2 - in two different private network - 192.168.122.0 & 192.168.100.0 - respectively, this way: [root@serv05 ~]# ip -o addr show | grep -w inet 1: lo inet 127.0.0.1/8 scope host lo 2: eth0 inet xxx.xxx.xx.197/24 brd xxx.xxx.xx.255 scope global eth0 4: virbr1 inet 192.168.100.1/24 brd 192.168.100.255 scope global virbr1 6: virbr0 inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0 # [root@serv05 ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr1 xxx.xxx.xx.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0 0.0.0.0 xxx.xxx.xx.62 0.0.0.0 UG 0 0 0 eth0 I've also setup IP FORWARDing and Masquerading this way: iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE iptables --append FORWARD --in-interface virbr0 -j ACCEPT All works up to this point. If I want to remote access vtest1 (or vtest2) first I ssh to serv05 and then from there ssh to vtest1. Is there a way to setup a port forwarding so that vtest1 can be accessed directly from the outside world? This is what I probably need to setup: external_ip (tcp port 4444) -> DNAT -> 192.168.122.50 (tcp port 22) I know it's easily do'able using a SOHO router but can't figure out how can I do that on a Linux box. Any help form you guys?? Cheers!! Update: 1 Now I've made ssh to listen to both of the ports: [root@serv05 ssh]# netstat -tulpn | grep ssh tcp 0 0 xxx.xxx.xx.197:22 0.0.0.0:* LISTEN 5092/sshd tcp 0 0 xxx.xxx.xx.197:4444 0.0.0.0:* LISTEN 5092/sshd and port 4444 is allowed in the iptables rules: [root@serv05 sysconfig]# grep 4444 iptables -A PREROUTING -i eth0 -p tcp -m tcp --dport 4444 -j DNAT --to-destination 192.168.122.50:22 -A INPUT -p tcp -m state --state NEW -m tcp --dport 4444 -j ACCEPT -A FORWARD -i eth0 -p tcp -m tcp --dport 4444 -j ACCEPT But I'm getting connection refused: maci:~ santa$ telnet serv05 4444 Trying xxx.xxx.xx.197... telnet: connect to address xxx.xxx.xx.197: Connection refused telnet: Unable to connect to remote host Any idea what's I'm still missing? Cheers!!

  Read the article

• Accessing our Intranet from outside our Network - WITHOUT VPN

  - by westexasman

  We just upgraded our company intranet from an IIS based, ASP (poorly written) server/code base to a Windows Server 2008 r2 (Apache/MySQL/PHP) server. The old server allowed users to login to intranet.xxx.org using there AD user/pass which then lead them to the company Intranet from basically anywhere they had Internet access. We want to mimic that functionality (or change it to something more secure) with the new setup. This was seemingly setup for off-site employees running on a state network. The state network does not allow VPN, therefor, we needed a way to allow those employees access to the Intranet. So, how do we go about allowing users to login from the outside world and gain access to our Intranet?

  Read the article

• Windows 7 - Static DHCP server address with dynamic IP Address

  - by mkstreet

  Is this possible? On my LAN, I would like to setup the network properties such that the DHCP server's address is static. However, I want that server to hand out the IP Addresses and DNS addresses dynamically. The reason is that some devices on the LAN will try to behave like a DHCP server. For example, we use software to push images to computers on the LAN (our computer software configurations are centrally managed). When that imaging distribution software happens to be running, the machines being imaged will get confused as to which device is the DHCP -- the real one or the machine that is sending them the image. So, to remove the confusion, I would like to setup my Windows 7 images such that the DHCP server address is statically assigned. And then that server would assign the IP Addresses and the DNS addresses dynamically.

  Read the article

• Does nginx auth_basic work over HTTPS?

  - by monde_

  I've been trying to setup a password protected directory in a SSL website as follows: /etc/nginx/sites-available/default server { listen 443: ssl on; ssl_certificate /usr/certs/server.crt; ssl_certificate_key /usr/certs/server.key; server_name server1.example.com; root /var/www/example.com/htdocs/; index index.html; location /secure/ { auth_basic "Restricted"; auth_basic_user_file /var/www/example.com/.htpasswd; } } The problem is when I try to access the URL https://server1.example.com/secure/, I get a "404: Not Found" error page. My error.log shows the following error: 011/11/26 03:09:06 [error] 10913#0: *1 no user/password was provided for basic authentication, client: 192.168.0.24, server: server1.example.com, request: "GET /secure/ HTTP/1.1", host: "server1.example.com" However, I was able to setup password protected directories for a normal HTTP virtual host without any problems. Is it a problem with the config or something else?

  Read the article

• Windows 7 fresh install blank screen

  - by Neil Barnwell

  I've just installed Win7 Ultimate to my PC. During the install it reboots a couple of times, but 2nd or 3rd reboot I see the "Starting Windows..." message, but followed by a black screen. No mouse cursor, taskbar, anything. The monitor power light is blue (indicating it has a signal) and it was displaying the setup wizard with no problems whatsoever. Has anyone else witnessed this phenomenon? Many thanks in advance. UPDATE I booted in safe mode, and got a screen saying "Setup is preparing your computer for first use". That's brilliant, although a message box has popped up over that saying: Windows cannot complete instlalation in Safe Mode. To continue installing Windows, restart the computer. So I don't really have the opportunity to do any cleverness with drivers or anything. I guess I could try getting a different version of Win7 (I'm installing from an MSDN DVD).

  Read the article

• cakephp & nginx config/rewrite rules

  - by seanl

  Hi somebody please help me out, I've asked this at stackoverflow as well but not got much of a response and was debating whether it was programming or server related. I’m trying to setup a cakephp environment on a Centos server running Nginx with Fact CGI. I already have a wordpress site running on the server and a phpmyadmin site so I have PHP configured correctly. My problem is that I cannot get the rewrite rules setup correct in my vhost so that cake renders pages correctly i.e. with styling and so on. I’ve googled as much as possible and the main consensus from the sites like the one listed below is that I need to have the following rewrite rule in place location / { root /var/www/sites/somedomain.com/current; index index.php index.html; # If the file exists as a static file serve it # directly without running all # the other rewrite tests on it if (-f $request_filename) { break; } if (!-f $request_filename) { rewrite ^/(.+)$ /index.php?url=$1 last; break; } } http://blog.getintheloop.eu/2008/4/17/nginx-engine-x-rewrite-rules-for-cakephp problem is these rewrite assume you run cake directly out of the webroot which is not what I want to do. I have a standard setup for each site i.e. one folder per site containing the following folders log, backup, private and public. Public being where nginx is looking for its files to serve but I have cake installed in private with a symlink in public linking back to /private/cake/ this is my vhost server { listen 80; server_name app.domain.com; access_log /home/public_html/app.domain.com/log/access.log; error_log /home/public_html/app.domain.com/log/error.log; #configure Cake app to run in a sub-directory #Cake install is not in root, but elsewhere and configured #in APP/webroot/index.php** location /home/public_html/app.domain.com/private/cake { index index.php; if (!-e $request_filename) { rewrite ^/(.+)$ /home/public_html/app.domain.com/private/cake/$1 last; break; } } location /home/public_html/app.domain.com/private/cake/ { index index.php; if (!-e $request_filename) { rewrite ^/(.+)$ /home/public_html/app.domain.com/public/index.php?url=$1 last; break; } } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /home/public_html/app.domain.com/private/cake$fastcgi_script_name; include /etc/nginx/fastcgi_params; } } Now like I said I can see the main index.php of cake and have connected it to my DB but this page is without styling so before I proceed any further I would like to configure it correctly. What am I doing wrong………. Thanks seanl

  Read the article

• Improving sound quality with remote ESD server

  - by cuu508

  Hi, I'm investigating low-budget ways to get audio from my PC (Ubuntu) to HiFi without wires. I'm currently testing a setup where Asus WL-500gP wireless router runs ESD daemon and has attached USB soundcard which is then plugged into HiFi. I'm testing playback on PC with mpg123-esd and Spotify under Wine. The sound is there, latency is unexpectedly low, but I also hear occassional clicks and some distortion from time to time. I suppose that's because of the low latency and wireless streaming of uncompressed audio--any packet drops, CPU temporarily being busy etc. will cause clicks in sound output. Is there a way around this problem, increasing latency / buffer size somehow perhaps? Streaming using shoutcast protocol seems to be a way out but I have feeling that would be a complex and brittle setup.

  Read the article

• Raid-3 like software backup tool

  - by Chronial

  I have a lot of data (about 7 TB), stored across multiple hard-drives with varying sizes. I would like to have a backup of that data to be safe against drive failure. A RAID is not a good option for me, as I want to keep my cost low and be able to easily extend the storage capacity of my setup by buying an additional HD. I remember seeing a piece of software that generates parity data over all drives and stores that on an extra drive. That solution protects the setup from hard drive failure and works with varying drive sizes (as long as the parity drive is the biggest one). But I can’t seem to find that software again. Does anybody now what I’m talking about or have any other solution for my situation?

  Read the article

• All of the automated client side filter rules just stopped working in Outlook 2007

  - by oo

  Somehow all of the rules that I setup are no longer working. Has anyone seen this?

  Read the article

< Previous Page | 195 196 197 198 199 200 201 202 203 204 205 206  | Next Page >