Search Results

Search found 72 results on 3 pages for 'bogdan maier'.

Page 2/3 | < Previous Page | 1 2 3  | Next Page >

  • OpenVPN bad source address from client

    - by Bogdan
    I have one problem with OpenVPN. There are a lot drops records in the openvpn log file on the server: Mon Oct 22 10:14:41 2012 us=726541 laptop/???:1194 MULTI: bad source address from client [192.168.1.107], packet dropped grep -E "^[a-z]" server.conf ----- port 1194 proto udp dev tun ca data/ca.crt cert data/server.crt key data/server.key dh data/dh1024.pem tls-server tls-auth data/ta.key 0 remote-cert-tls client cipher AES-256-CBC tun-mtu 1200 server 10.10.10.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 8.8.8.8" client-to-client client-config-dir /etc/openvpn/ccd route 10.10.10.0 255.255.255.0 keepalive 10 120 comp-lzo persist-key persist-tun max-clients 5 status /var/log/status-openvpn.log log /var/log/openvpn.log verb 4 auth-user-pass-verify /etc/openvpn/verify.sh via-file tmp-dir /tmp script-security 2 ----- cat ccd/laptop ----- iroute 10.10.10.0 255.255.255.0 ----- cat client.conf ----- remote server ip 1194 client dev tun ping 10 comp-lzo proto udp tls-client tls-auth data/ta.key 1 pkcs12 data/vpn.laptop.p12 remote-cert-tls server #ns-cert-type server persist-key persist-tun cipher AES-256-CBC verb 3 pull auth-user-pass /home/user/.openvpn/users.db ----- According to "Jan Just Keijser - OpenVPN 2 Cookbook" root of the problem is incorrect config options.see the screenshot But, as you see, my config has such options. Could you please help me to solve this problem. @week Verb leverl=6; client log. Mon Oct 22 16:06:02 2012 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0 Mon Oct 22 16:06:02 2012 /sbin/ifconfig tun0 10.10.10.3 pointopoint 10.10.10.5 mtu 1500 Mon Oct 22 16:06:02 2012 /sbin/route add -net xxxx netmask 255.255.255.255 gw 192.168.1.1 Mon Oct 22 16:06:02 2012 /sbin/route add -net 0.0.0.0 netmask 128.0.0.0 gw 10.10.10.5 Mon Oct 22 16:06:02 2012 /sbin/route add -net 128.0.0.0 netmask 128.0.0.0 gw 10.10.10.5 Mon Oct 22 16:06:02 2012 Initialization Sequence Completed cat ccd/latop iroute 10.10.10.0 255.255.255.0 ifconfig-push 10.10.10.3 10.10.10.5

    Read the article

  • hdd fail, allows format, allows copy

    - by Bogdan
    Hello I have a problem with a Fujitsu laptop. Some kid played with it and now the hdd is a wreck. I can't install Windows XP, Windows 7 or Linux. I checked with hiren's boot for bad sector did a chdisk on it says I don't have any bad sectors, on smart says is active but status error. I tried format and it worked, I tried copying files using a live CD and it worked, but when I try to install the OS it says it can't format, or it can't copy files.

    Read the article

  • Is there such thing as hardware encrypted raid disk?

    - by Dumitrescu Bogdan
    I have a server for which I want to protect the content. The server is located on a clients premises. Is there a way to encrypt the content of a RAID DISK (at hardware level) ? What I need is that the server will not be able to start as long as the required password is not provided (the encryption key) I will give the best answer to Miles, though the answer was not exactly to my question. But from all the comments, it seems that it cannot be done hardware or .. it cannot be done as I would like to.

    Read the article

  • How do I send a newsletter to 2000 emails on a shared server?

    - by Bogdan
    Consider this scenario: I'm running Magento 1.4 Community Edition I have a newsletter that I'm sending out 2 times per week My list has 2000 subscribers I'm on a shared hosting plan (linux on apache 2.2 with Cpanel) My hosting provider limits me to 6 emails/minute How can I send 2000 emails x 2 times/week x 4 weeks/month in the above scenario? Is there a server configuration I can ask my hosting company to make? Any software that can temporize the email send?

    Read the article

  • Running docker in VPC and accessing container from another VPC machine

    - by Bogdan Gaza
    I'm having issues while running docker in AWS VPC. Here is my setup: I've got two machines running in VPC: 10.0.100.150 10.0.100.151 both having an elastic IPs assigned to them, both running in the same internet enabled subnet. Let's say I'm running a web server that serves static files in a container on the 10.0.100.150 machine the container: IP: 172.17.0.2 port 8111 is forwarded on the 8111 port on the machine. I'm trying to access the static files from my local machine (or another non-VPC machine also tried an EC2 instance not running in the VPC) and it work flawlessly. If I try to access the files from the other machine (10.0.100.151) it hangs. I'm using wget to pull the files. Tried to debug it with tcpdump and ngrep and that I have seen is that the request reaches the container. If I ngrep on the host machine I see the requests going in but no response going back. If I ngrep on the container I see the requests going in and the response going back. I've tried multiple iptables setups (with postrouting enabled, with manually forwarding ports etc) but no success. Help in any way - even debugging directions would be much appreciated. Thanks!

    Read the article

  • Ubuntu - Is there a way to associate keyboard shortcuts to bring a window to front?

    - by Bogdan Piloca
    I am using exactly 3 programs: - a browser - a terminal - a code editor I keep all in fullscreen windows. What I need is to be able to bring any one of them up with a simple keyboard shortcut, like Ctrl+Alt+B for browser, etc. Alt-Tab sucks because I have to stop and see where the selector is. Using 3 workspaces is better but still not ideal - I need to think about where I am and where I need to go. E.g. My browser is on top of my terminal and my code editor is to the right of the terminal. So to move from browser to terminal I use Ctrl+Alt+Down, but to move from code editor to terminal I have to do Ctrl+Alt+Left. Instead I should just do Ctrl+Alt+T for terminal, for example. Thanks!

    Read the article

  • Linq 2 Sql DateTime format to string yyyy-MM-dd

    - by Bogdan Maxim
    Basically, i need the equivalent of T-SQL CONVERT(NVARCHAR(10), datevalue, 126) I've tried: from t in ctx.table select t.Date.ToString("yyyy-MM-dd") but it throws not supported exception from t in ctx.table select "" + t.Date.Year + "-" + t.Date.Month + "-" + t.Date.Day but i don't think it's an usable solution, because i might need to be able to change the format. The only option I see is to use Convert.ToString(t.Date, FormatProvider), but i need a format provider, and I'm not sure it works either.

    Read the article

  • TortoiseSVN trunk checkout "Server sent unexpected return value (403 Forbidden) in response to OPTIO

    - by S Bogdan
    First of all please excuse my lack of knowledge, I'm new to Tortoise, and my bad English. My problem is that every time I do some operation with an URL like the following one: https://nttt.dttt.com:8443/svn/nttt/Med/trunk I get "Server sent unexpected return value (403 Forbidden) in response to OPTIONS". The user and password I supplied was correct, so no problem there. I don't know where the problem lies, I don't know if it is the server(on witch I don't have any control) or my Tortoise client. Thanks in advance for any answer or guidance.

    Read the article

  • mysqldump table names prefix

    - by Bogdan Gusiev
    I have two mysql databases that have almost the same structure and representing the data of the same web app but one of them represents the current version and second one was made long time ago. How can I create the database with both dumps inside but with old_ prefix for tables from the first and new_ prefix for tables from the second database? Is there any mysqldump options to setup the prefix or other solution?

    Read the article

  • NServiceBus persisting subscriptions in Pub/Sub sample

    - by Bogdan Nedelcu
    I want to figure out how I to set up the Pub/Sub sample from NServiceBus to work in the case of publisher malfunction. When I start the samples and accidentaly close the Subscribers, if I restart everything works fine. If however I kill the publisher and the subscriptions continue to work, if I restart the publisher, then it doesn't seem to know it has subscribers and doesn't post any messages. I added the config entry <MsmqSubscriptionStorageConfig Queue="subscriptions"/> but it seems to not function... I miss something. I googled about MsmqSubscriptionStorageConfig and DbSubscriptionStorageConfig but i didn't find a solution. Could someone point me in the right direction ?

    Read the article

  • GWT: Wrong Key Codes generated with a French keyboard

    - by Flueras Bogdan
    On any french keyboard(AZERTY) the dot char '.' is generated with (Shift + ;) combination while the percent char '%' is generated with (Shift + ù) combination So when I type one of the above combinations in a GWT text area to write '.' or ' %', the key codes generated for these events are KEY_DELETE in the former case and KEY_LEFT in the latter. TextArea txtArea = new TextArea(); txtArea.addKeyPressHandler(new KeyPressHandler() { public void onKeyPress(KeyPressEvent event) { switch (charCode) { case KeyCodes.KEY_LEFT: { // key code 37 System.out.write("KEY LEFT"); break; } case KeyCodes.KEY_DELETE: { // key code 46 System.out.write("DELETE"); break; } } Workaround: get charCode and do a character match: charCode = event.getCharCode(); if (charCode == '.') {...} else if (charCode == '%') {...} Is this a GWT bug? And is there a more elegant way to handle this ?

    Read the article

  • Hung JVM consuming 100% CPU

    - by Bogdan
    We have a JAVA server running on Sun JRE 6u20 on Linux 32-bit (CentOS). We use the Server Hotspot with CMS collector with the following options (I've only provided the relevant ones): -Xmx896m -Xss128k -XX:NewSize=384M -XX:MaxPermSize=96m -XX:+UseParNewGC -XX:+UseConcMarkSweepGC Sometimes, after running for a while, the JVM seems to slip into a hung state, whereby even though we don't make any requests to the application, the CPU continues to spin at 100% (we have 8 logical CPUs, so it looks like only one CPU does the spinning). In this state the JVM doesn't respond to SIGHUP signals (kill -3) and we can't connect to it normally with jstack. We CAN connect with "jstack -F", but the output is dodgy (we can see lots of NullPointerExceptions from JStack apparently because it wasn't able to 'walk' some stacks). So the "jstack -F" output seems to be useless. We have run a stack dump from "gdb" though, and we were able to match the thread id that spins the CPU (we found that using "top" with a per-thread view - "H" option) with a thread stack that appears in the gdb result and this is how it looks like: Thread 443 (Thread 0x7e5b90 (LWP 26310)): #0 0x0115ebd3 in CompactibleFreeListSpace::block_size(HeapWord const*) const () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #1 0x01160ff9 in CompactibleFreeListSpace::prepare_for_compaction(CompactPoint*) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #2 0x0123456c in Generation::prepare_for_compaction(CompactPoint*) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #3 0x01229b2c in GenCollectedHeap::prepare_for_compaction() () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #4 0x0122a7fc in GenMarkSweep::invoke_at_safepoint(int, ReferenceProcessor*, bool) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #5 0x01186024 in CMSCollector::do_compaction_work(bool) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #6 0x011859ee in CMSCollector::acquire_control_and_collect(bool, bool) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #7 0x01185705 in ConcurrentMarkSweepGeneration::collect(bool, bool, unsigned int, bool) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #8 0x01227f53 in GenCollectedHeap::do_collection(bool, bool, unsigned int, bool, int) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #9 0x0115c7b5 in GenCollectorPolicy::satisfy_failed_allocation(unsigned int, bool) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #10 0x0122859c in GenCollectedHeap::satisfy_failed_allocation(unsigned int, bool) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #11 0x0158a8ce in VM_GenCollectForAllocation::doit() () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #12 0x015987e6 in VM_Operation::evaluate() () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #13 0x01597c93 in VMThread::evaluate_operation(VM_Operation*) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #14 0x01597f0f in VMThread::loop() () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #15 0x015979f0 in VMThread::run() () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #16 0x0145c24e in java_start(Thread*) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #17 0x00ccd46b in start_thread () from /lib/libpthread.so.0 #18 0x00bc2dbe in clone () from /lib/libc.so.6 It seems that a JVM thread is spinning while doing some CMS related work. We have checked the memory usage on the box, there seems to be enough memory available and the system is not swapping. Has anyone come across such a situation? Does it look like a JVM bug? UPDATE I've obtained some more information about this problem (it happened again on a server that has been running for more than 7 days). When the JVM entered the "hung" state it stayed like that for 2 hours until the server was manually restarted. We have obtained a core dump of the process and the gc log. We tried to get a heap dump as well, but "jmap" failed. We tried to use jmap -F but then only a 4Mb file was written before the program aborted with an exception (something about the a memory location not being accessible). So far I think the most interesting information comes from the gc log. It seems that the GC logging stopped as well (possibly at the time when the VM thread went into the long loop): 657501.199: [Full GC (System) 657501.199: [CMS: 400352K->313412K(524288K), 2.4024120 secs] 660634K->313412K(878208K), [CMS Perm : 29455K->29320K(68568K)], 2.4026470 secs] [Times: user=2.39 sys=0.01, real=2.40 secs] 657513.941: [GC 657513.941: [ParNew: 314624K->13999K(353920K), 0.0228180 secs] 628036K->327412K(878208K), 0.0230510 secs] [Times: user=0.08 sys=0.00, real=0.02 secs] 657523.772: [GC 657523.772: [ParNew: 328623K->17110K(353920K), 0.0244910 secs] 642036K->330523K(878208K), 0.0247140 secs] [Times: user=0.08 sys=0.00, real=0.02 secs] 657535.473: [GC 657535.473: [ParNew: 331734K->20282K(353920K), 0.0259480 secs] 645147K->333695K(878208K), 0.0261670 secs] [Times: user=0.11 sys=0.00, real=0.02 secs] .... .... 688346.765: [GC [1 CMS-initial-mark: 485248K(524288K)] 515694K(878208K), 0.0343730 secs] [Times: user=0.03 sys=0.00, real=0.04 secs] 688346.800: [CMS-concurrent-mark-start] 688347.964: [CMS-concurrent-mark: 1.083/1.164 secs] [Times: user=2.52 sys=0.09, real=1.16 secs] 688347.964: [CMS-concurrent-preclean-start] 688347.969: [CMS-concurrent-preclean: 0.004/0.005 secs] [Times: user=0.00 sys=0.01, real=0.01 secs] 688347.969: [CMS-concurrent-abortable-preclean-start] CMS: abort preclean due to time 688352.986: [CMS-concurrent-abortable-preclean: 2.351/5.017 secs] [Times: user=3.83 sys=0.38, real=5.01 secs] 688352.987: [GC[YG occupancy: 297806 K (353920 K)]688352.987: [Rescan (parallel) , 0.1815250 secs]688353.169: [weak refs processing, 0.0312660 secs] [1 CMS-remark: 485248K(524288K)] 783055K(878208K), 0.2131580 secs] [Times: user=1.13 sys =0.00, real=0.22 secs] 688353.201: [CMS-concurrent-sweep-start] 688353.903: [CMS-concurrent-sweep: 0.660/0.702 secs] [Times: user=0.91 sys=0.07, real=0.70 secs] 688353.903: [CMS-concurrent-reset-start] 688353.912: [CMS-concurrent-reset: 0.008/0.008 secs] [Times: user=0.01 sys=0.00, real=0.01 secs] 688354.243: [GC 688354.243: [ParNew: 344928K->30151K(353920K), 0.0305020 secs] 681955K->368044K(878208K), 0.0308880 secs] [Times: user=0.15 sys=0.00, real=0.03 secs] .... .... 688943.029: [GC 688943.029: [ParNew: 336531K->17143K(353920K), 0.0237360 secs] 813250K->494327K(878208K), 0.0241260 secs] [Times: user=0.10 sys=0.00, real=0.03 secs] 688950.620: [GC 688950.620: [ParNew: 331767K->22442K(353920K), 0.0344110 secs] 808951K->499996K(878208K), 0.0347690 secs] [Times: user=0.11 sys=0.00, real=0.04 secs] 688956.596: [GC 688956.596: [ParNew: 337064K->37809K(353920K), 0.0488170 secs] 814618K->515896K(878208K), 0.0491550 secs] [Times: user=0.18 sys=0.04, real=0.05 secs] 688961.470: [GC 688961.471: [ParNew (promotion failed): 352433K->332183K(353920K), 0.1862520 secs]688961.657: [CMS I suspect this problem has something to do with the last line in the log (I've added some "...." in order to skip some lines that were not interesting). The fact that the server stayed in the hung state for 2 hours (probably trying to GC and compact the old generation) seems quite strange to me. Also, the gc log stops suddenly with that message and nothing else gets printed any more, probably because the VM Thread gets into some sort of infinite loop (or something that takes 2+ hours).

    Read the article

  • How to implement drag and drop in Flex Grid control?

    - by Bogdan
    I have a simple Grid control with some buttons that I want to be able to move around. The code below does work, but it takes a lot of effort to actually do the drag&drop and it is not clear where the drop will happen. I have to move the mouse around a lot to get to a state where the drop is not rejected. I would appreciate any suggestions on how to make this more "user friendly". <?xml version="1.0" encoding="utf-8"?> <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical" verticalAlign="middle" horizontalAlign="center" height="200" width="200"> <mx:Script> <![CDATA[ import mx.containers.GridItem; import mx.controls.Button; import mx.core.DragSource; import mx.events.*; import mx.managers.DragManager; private function dragInit(event:MouseEvent):void { if(event.buttonDown) { var button:Button = event.currentTarget as Button; var dragSource:DragSource = new DragSource(); dragSource.addData(button, 'button'); DragManager.doDrag(button, dragSource, event); } } private function dragEnter(event:DragEvent): void { var target:GridItem = event.currentTarget as GridItem; if (event.dragSource.hasFormat('button') && target.getChildren().length == 0) { DragManager.acceptDragDrop(target); DragManager.showFeedback(DragManager.MOVE); } } private function dragDrop(event:DragEvent): void { var target:GridItem = event.currentTarget as GridItem; var button:Button = event.dragSource.dataForFormat('button') as Button; target.addChild(button); } ]]> </mx:Script> <mx:Grid> <mx:GridRow width="100%" height="100%"> <mx:GridItem width="44" height="44" dragEnter="dragEnter(event)" dragDrop="dragDrop(event)"> </mx:GridItem> <mx:GridItem width="44" height="44" dragEnter="dragEnter(event)" dragDrop="dragDrop(event)"> </mx:GridItem> <mx:GridItem width="44" height="44" dragEnter="dragEnter(event)" dragDrop="dragDrop(event)"> <mx:Button label="A" width="40" height="40" mouseMove="dragInit(event)"/> </mx:GridItem> </mx:GridRow> <mx:GridRow width="100%" height="100%"> <mx:GridItem width="44" height="44" dragEnter="dragEnter(event)" dragDrop="dragDrop(event)"> </mx:GridItem> <mx:GridItem width="44" height="44" dragEnter="dragEnter(event)" dragDrop="dragDrop(event)"> <mx:Button label="B" width="40" height="40" mouseMove="dragInit(event)"/> </mx:GridItem> <mx:GridItem width="44" height="44" dragEnter="dragEnter(event)" dragDrop="dragDrop(event)"> </mx:GridItem> </mx:GridRow> <mx:GridRow width="100%" height="100%"> <mx:GridItem width="44" height="44" dragEnter="dragEnter(event)" dragDrop="dragDrop(event)"> <mx:Button label="C" width="40" height="40" mouseMove="dragInit(event)"/> </mx:GridItem> <mx:GridItem width="44" height="44" dragEnter="dragEnter(event)" dragDrop="dragDrop(event)"> </mx:GridItem> <mx:GridItem width="44" height="44" dragEnter="dragEnter(event)" dragDrop="dragDrop(event)"> </mx:GridItem> </mx:GridRow> </mx:Grid> <mx:Style> GridItem { borderColor: #A09999; borderStyle: solid; borderThickness: 2; horizontal-align: center; vertical-align: center; } Grid { borderColor: #A09999; borderStyle: solid; borderThickness: 2; horizontalGap: 0; verticalGap: 0; horizontal-align: center; vertical-align: center; } </mx:Style> </mx:Application>

    Read the article

  • Why 2 versions of jetty maven plugins ?

    - by Flueras Bogdan
    Hello, I set up a new webapp maven project and wanted to test it with jetty's maven plugin. So issuded in the console the command: mvn jetty:run After defining the pluginGroup in Maven's setting file I ran once again the command. Unfortunately, it failed because i was using one of the below mentioned versions of the plugin. The first has artifact id: maven-jetty-plugin and the 2nd:jetty-maven-plugin. Why there are 2 maven based plugins for achieving the same thing - running jetty? Why do they have to bring so much confusion? Or be so kind as to explain me the differences between them. Thank you.

    Read the article

  • How can I translate Linux keycodes from /dev/input/event* to ASCII in Perl?

    - by Bogdan Constantinescu
    I'm writing a Perl script that reads data from the infamous /dev/input/event* and I didn't find a way to translate the key codes generated by the kernel into ASCII. I'm talking about the linux key codes in this table here and I can't seem to find something that would help me translate them without hardcoding an array into the script. Am I missing something? I'd like to skip the array part because it doesn't seem to be a good practice, so any idea? :)

    Read the article

  • Code Signing Services

    - by bogdan
    I'm developing a System Preference Pane that runs a background application. I'm planning on codesigning the background application and I'll be using the kill flag of codesign (http://gemma.apple.com/mac/library/documentation/Darwin/Reference/ManPages/man1/codesign.1.html). From my understanding, this kill flag will not allow the background application to be run if it's signature doesn't match. My problem with this approach is that it doesn't provide any feedback to the user and, for somewhat reason, the application gets corrupted, it will refuse to launch without any information. I'd like to use the Code Signing Service from the System Preference Pane to check the validity of the background application. However, I couldn't find how to use it to check the validity of an external file. Is this possible using the Code Signing Service or should I NSTask codesign directly? My application is targeted for 10.6 so it doesn't matter which I use. Thank you!

    Read the article

  • Oracle Application Server 10.1.3.5 Security issue.

    - by Marius Bogdan IONESCU
    Hello! we are tying to port a J2EE app from OAS 9.0.4 (working perfectly) on OAS 10.1.3.5 the reson we do that is because we need the app compiled with java 1.5 and OAS 10.1.3.5 would be the single major version supporting that binaries which has oc4j/orion kernel. The issue is that the security constraints in matter of user/group/role are not read by the app server, and instead of asking for these sets of users, i have to use the oc4jadmin instead the selected users for auth. All xml files needed for describing these sets of rules are being checked with the OAS book, and it seems they are correctly filled in... anybody has an idea about this?

    Read the article

  • Firefox redirect response on xhr request

    - by Bogdan Gusiev
    Suppose we have the xhr 'POST' request that returns 'redirect' status code. In that case browser is sending additional xhr 'GET' by the given URL. I am not sure who is doing that call chain: browser itself or js library(using MooTools). The problem is that the second 'GET' request is not recognized as xhr by the server: It doesn't have "X-Requested-With" header contains "XMLHttpRequest" The problem appears only on Firefox, but not on Webkit. So, believe it is not related to js library bug. Does anyone have ideas how to fix it?

    Read the article

  • Strange GWT serialization exception when overiding method of serialized object

    - by Flueras Bogdan
    Hi there! I have a GWT serializable class, lets call it Foo. Foo implements IsSerializable, has primitive and serializable members as well as other transient members and a no-arg constructor. class Foo implements IsSerializable { // transient members // primitive members public Foo() {} public void bar() {} } Also a Service which handles RPC comunication. // server code public interface MyServiceImpl { public void doStuff(Foo foo); } public interface MyServiceAsync { void doStuff(Foo foo, AsyncCallback<Void> async); } How i use this: private MyServiceAsync myService = GWT.create(MyService.class); Foo foo = new Foo(); ... AsyncCallback callback = new new AsyncCallback {...}; myService.doStuff(foo, callback); In the above case the code is running, and the onSuccess() method of callback instance gets executed. But when I override the bar() method on foo instance like this: Foo foo = new Foo() { public void bar() { //do smthng different } } AsyncCallback callback = new new AsyncCallback {...}; myService.doStuff(foo, callback); I get the GWT SerializationException. Please enlighten me, because I really don't understand why.

    Read the article

  • Cocoa/AppleScript move file

    - by bogdan
    I have a list of file paths and a destination path. I need something (AppleScript, Cocoa) that will move the files from one location to an other. I first tried using the following AppleScript, just to see what happens: set the_folder to (choose folder) tell application "Finder" move selection to the_folder end tell The problem is that it just blindly tries to move a file, nothing like the way Finder actually moves files (i.e. if a file with that name already exists, the AppleScript just throws an error, while Finder would ask you if you want to replace the file). The solution I came up with involved NSFileManager. I won't post the code because it's quite long, but basically I just check if the file already exists before trying to move, and if it exists a NSAlert with Replace/Cancel buttons appear. I have 2 remaining problems: Authorization - if you try to do something to files where you don't have access, the Finder would ask you to authorize. My code just fails... Moving to external drives - when you try to move a file to a different drive, NSFileManager copies the file and then deletes the original. The problem is that NSFileManager doesn't provide anything which I could use to display a progress indicator of what's happening during the copy. Is there anything I could use that is able to move files without these problems? The way I see it, I'm pretty much stuck with checking if the files are writable by the current user and authorize NSFileManager if not (from my understanding of the Authorization Services, this will be quite hard to implement). Oh and, I would also need to check if the destination is on the same drive and if not, implement something with FSCopyObjectAsync so that it shows a progress indicator... Thanks!

    Read the article

< Previous Page | 1 2 3  | Next Page >