Search Results

Search found 870 results on 35 pages for 'c sd'.

Page 2/35 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• SD card mounted as bootable image instead of FAT 32

  - by Benny Wong

  I have an SD card that I recently used to take photos on vacation. It have taken a lot of photos using it and worked fine on the camera. However, I had forgotten that a few months before this trip, I tried to make the SD card a bootable Xubuntu USB drive. So when I plugged my SD card in to copy the photos, the card mounts as the Xubuntu image, rather than mounting as the FAT32 drive with the images on it. The files must still be on the drive. Any ideas on how to fix this? (I'm using Mac OS X) Thanks!

  Read the article

• Can software operation damage an SD card?

  - by Borek

  My SD card has a broken boot sector and the tools I've tried say that it's not repairable (I've tried TestDisk, DriveRestore Pro and Easeus Partition Recovery). The card was in my Android phone and at one point, it simply shut down and I had to reboot it. After I rebooted it, the SD card was not recognized and since then I've tried to recover it (I don't want to format the card as it contains some data I'd like not to lose although it's nothing critical). My question is, can some software error in Android, or a sudden crash of a system, damage the SD card? Or was it the other way around, the card first died and it brought the system down?

  Read the article

• Using a SD card as a smart card for two-step verification for Mac logon

  - by Greg Brown

  What I am trying to do is create two-step verification to logon to my mac, one being that you would need to input a SD card (formated with special format or something) and then also have a password. Is there any software out there that could do this or any way of programming it so that once it reads the SD Card it makes the password bar visible for logon. Would it be easier to do it with Linux since it is open source? Any help in the right direction is appreciated. Thanks

  Read the article

• Restoring a SD card after using it to root a device

  - by Raz

  I recently purchased the Nook Touch reading device. I rooted it using the instructions on nookdevs.com Rooting included using win32diskimager to somehow transfer an .img file onto the card. Rooting is now completed and as far as I can tell, I don't need to keep the files used on the SD card, which has been reduced from a 3.5 GB or so unit to a 75 MB unit. Is there a simple way for me to somehow reformat the SD card to its original state or at least 3.5 GB. I cannot simply format it.

  Read the article

• Is ThinkPad X61T SD card slot SDXC compatible?

  - by trismarck

  I have a Thinkpad X61T 7763 tablet and I was planning to buy a 64GB card for the SD card slot. The 64GB card supports the new SDXC standard and I'm not sure if the SD card driver / hardware can handle that. So far, I've successfully used 8GB cards in the slot, but they were SDHC ones. Thinkpad manuals don't give the answer. I wonder if anyone tried this configuration already and what was the outcome.

  Read the article

• How to boot Chromebook from SD card without entering developer mode?

  - by Caleb Strutz

  I have a question. Is it at all possible to install Ubuntu or Chrubuntu onto a SD Card and then boot a chromebook from said SD card? I know this is easily possible, but the chromebook in question belongs to my school, so I cannot enter developer mode, because that would void the license agreement. I don't really care how technical or how many steps this will take, as long as it can be possible. Thanks in advance.

  Read the article

• How to rescue from an SD (SDHC) card that I can't reformat (possible hardware failure)

  - by sbwoodside

  I have a transcend 16GB SDHC card and a lot of photos on it that I'd like to recover. When I plug it into the SD card reader, it takes a while for the Mac to even recognize that there's a disk present, and it shows up as 1.07GB with geometry 520/64/63 (according to fdisk). First I tried file recovery: PhotoRec: no files are found (the images are in CR2 format and I'm using testdisk-6.14-WIP which claims to recognize that format under TIF) dd / ddrescue: they create a 1.07GB image, same problem as above TestDisk: doesn't find any partitions to recover I found a source saying that the correct geometry for this type of SD Card is Heads 255, Sectors/Track 63, Cylinders 1953, so I tried manually setting that geometry in PhotoRec/TestDisk. No improvement. Next I tried formatting the disk with fdisk. After writing and quitting, I ran fdisk again and it reported that the new format hadn't been saved on the disk. I also tried resetting the format/partitions with TestDisk and that failed also. The fdisk log is below. I don't really care about the card, I've already ordered a new SanDisk card. But I'd like to get the data off. Maybe, is there any way to force dd or some other tool to create an image of the disk based on the original geometry and not on what the card "thinks" its geometry is? Or am I missing something?

  Read the article

• External HDD USB 3.0 failure

  - by Philip

  [ 2560.376113] usb 9-1: new high-speed USB device number 2 using xhci_hcd [ 2560.376186] usb 9-1: Device not responding to set address. [ 2560.580136] usb 9-1: Device not responding to set address. [ 2560.784104] usb 9-1: device not accepting address 2, error -71 [ 2560.840127] hub 9-0:1.0: unable to enumerate USB device on port 1 [ 2561.080182] usb 10-1: new SuperSpeed USB device number 5 using xhci_hcd [ 2566.096163] usb 10-1: device descriptor read/8, error -110 [ 2566.200096] usb 10-1: new SuperSpeed USB device number 5 using xhci_hcd [ 2571.216175] usb 10-1: device descriptor read/8, error -110 [ 2571.376138] hub 10-0:1.0: unable to enumerate USB device on port 1 [ 2571.744174] usb 10-1: new SuperSpeed USB device number 7 using xhci_hcd [ 2576.760116] usb 10-1: device descriptor read/8, error -110 [ 2576.864074] usb 10-1: new SuperSpeed USB device number 7 using xhci_hcd [ 2581.880153] usb 10-1: device descriptor read/8, error -110 [ 2582.040123] hub 10-0:1.0: unable to enumerate USB device on port 1 [ 2582.224139] hub 9-0:1.0: unable to enumerate USB device on port 1 [ 2582.464177] usb 10-1: new SuperSpeed USB device number 9 using xhci_hcd [ 2587.480122] usb 10-1: device descriptor read/8, error -110 [ 2587.584079] usb 10-1: new SuperSpeed USB device number 9 using xhci_hcd [ 2592.600150] usb 10-1: device descriptor read/8, error -110 [ 2592.760134] hub 10-0:1.0: unable to enumerate USB device on port 1 [ 2593.128175] usb 10-1: new SuperSpeed USB device number 11 using xhci_hcd [ 2598.144183] usb 10-1: device descriptor read/8, error -110 [ 2598.248109] usb 10-1: new SuperSpeed USB device number 11 using xhci_hcd [ 2603.264171] usb 10-1: device descriptor read/8, error -110 [ 2603.480157] usb 10-1: new SuperSpeed USB device number 12 using xhci_hcd [ 2608.496162] usb 10-1: device descriptor read/8, error -110 [ 2608.600091] usb 10-1: new SuperSpeed USB device number 12 using xhci_hcd [ 2613.616166] usb 10-1: device descriptor read/8, error -110 [ 2613.832170] usb 10-1: new SuperSpeed USB device number 13 using xhci_hcd [ 2618.848135] usb 10-1: device descriptor read/8, error -110 [ 2618.952079] usb 10-1: new SuperSpeed USB device number 13 using xhci_hcd [ 2623.968155] usb 10-1: device descriptor read/8, error -110 [ 2624.184176] usb 10-1: new SuperSpeed USB device number 14 using xhci_hcd [ 2629.200124] usb 10-1: device descriptor read/8, error -110 [ 2629.304075] usb 10-1: new SuperSpeed USB device number 14 using xhci_hcd [ 2634.320172] usb 10-1: device descriptor read/8, error -110 [ 2634.424135] hub 10-0:1.0: unable to enumerate USB device on port 1 [ 2634.776186] usb 10-1: new SuperSpeed USB device number 15 using xhci_hcd [ 2639.792105] usb 10-1: device descriptor read/8, error -110 [ 2639.896090] usb 10-1: new SuperSpeed USB device number 15 using xhci_hcd [ 2644.912172] usb 10-1: device descriptor read/8, error -110 [ 2645.128174] usb 10-1: new SuperSpeed USB device number 16 using xhci_hcd [ 2650.144160] usb 10-1: device descriptor read/8, error -110 [ 2650.248062] usb 10-1: new SuperSpeed USB device number 16 using xhci_hcd [ 2655.264120] usb 10-1: device descriptor read/8, error -110 [ 2655.480182] usb 10-1: new SuperSpeed USB device number 17 using xhci_hcd [ 2660.496121] usb 10-1: device descriptor read/8, error -110 [ 2660.600086] usb 10-1: new SuperSpeed USB device number 17 using xhci_hcd [ 2665.616167] usb 10-1: device descriptor read/8, error -110 [ 2665.832177] usb 10-1: new SuperSpeed USB device number 18 using xhci_hcd [ 2670.848110] usb 10-1: device descriptor read/8, error -110 [ 2670.952066] usb 10-1: new SuperSpeed USB device number 18 using xhci_hcd [ 2675.968081] usb 10-1: device descriptor read/8, error -110 [ 2676.072124] hub 10-0:1.0: unable to enumerate USB device on port 1 [ 2786.104531] xhci_hcd 0000:02:00.0: remove, state 4 [ 2786.104546] usb usb10: USB disconnect, device number 1 [ 2786.104686] xHCI xhci_drop_endpoint called for root hub [ 2786.104692] xHCI xhci_check_bandwidth called for root hub [ 2786.104942] xhci_hcd 0000:02:00.0: USB bus 10 deregistered [ 2786.105054] xhci_hcd 0000:02:00.0: remove, state 4 [ 2786.105065] usb usb9: USB disconnect, device number 1 [ 2786.105176] xHCI xhci_drop_endpoint called for root hub [ 2786.105181] xHCI xhci_check_bandwidth called for root hub [ 2786.109787] xhci_hcd 0000:02:00.0: USB bus 9 deregistered [ 2786.110134] xhci_hcd 0000:02:00.0: PCI INT A disabled [ 2794.268445] pci 0000:02:00.0: [1b73:1000] type 0 class 0x000c03 [ 2794.268483] pci 0000:02:00.0: reg 10: [mem 0x00000000-0x0000ffff] [ 2794.268689] pci 0000:02:00.0: PME# supported from D0 D3hot [ 2794.268700] pci 0000:02:00.0: PME# disabled [ 2794.276383] pci 0000:02:00.0: BAR 0: assigned [mem 0xd7800000-0xd780ffff] [ 2794.276398] pci 0000:02:00.0: BAR 0: set to [mem 0xd7800000-0xd780ffff] (PCI address [0xd7800000-0xd780ffff]) [ 2794.276419] pci 0000:02:00.0: no hotplug settings from platform [ 2794.276658] xhci_hcd 0000:02:00.0: enabling device (0000 -> 0002) [ 2794.276675] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2794.276762] xhci_hcd 0000:02:00.0: setting latency timer to 64 [ 2794.276771] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2794.276913] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9 [ 2794.395760] xhci_hcd 0000:02:00.0: irq 16, io mem 0xd7800000 [ 2794.396141] xHCI xhci_add_endpoint called for root hub [ 2794.396144] xHCI xhci_check_bandwidth called for root hub [ 2794.396195] hub 9-0:1.0: USB hub found [ 2794.396203] hub 9-0:1.0: 1 port detected [ 2794.396305] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2794.396371] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 10 [ 2794.396496] xHCI xhci_add_endpoint called for root hub [ 2794.396499] xHCI xhci_check_bandwidth called for root hub [ 2794.396547] hub 10-0:1.0: USB hub found [ 2794.396553] hub 10-0:1.0: 1 port detected [ 2798.004084] usb 1-3: new high-speed USB device number 8 using ehci_hcd [ 2798.140824] scsi21 : usb-storage 1-3:1.0 [ 2820.176116] usb 1-3: reset high-speed USB device number 8 using ehci_hcd [ 2824.000526] scsi 21:0:0:0: Direct-Access BUFFALO HD-PZU3 0001 PQ: 0 ANSI: 6 [ 2824.002263] sd 21:0:0:0: Attached scsi generic sg2 type 0 [ 2824.003617] sd 21:0:0:0: [sdb] 1953463728 512-byte logical blocks: (1.00 TB/931 GiB) [ 2824.005139] sd 21:0:0:0: [sdb] Write Protect is off [ 2824.005149] sd 21:0:0:0: [sdb] Mode Sense: 1f 00 00 08 [ 2824.009084] sd 21:0:0:0: [sdb] No Caching mode page present [ 2824.009094] sd 21:0:0:0: [sdb] Assuming drive cache: write through [ 2824.011944] sd 21:0:0:0: [sdb] No Caching mode page present [ 2824.011952] sd 21:0:0:0: [sdb] Assuming drive cache: write through [ 2824.049153] sdb: sdb1 [ 2824.051814] sd 21:0:0:0: [sdb] No Caching mode page present [ 2824.051821] sd 21:0:0:0: [sdb] Assuming drive cache: write through [ 2824.051825] sd 21:0:0:0: [sdb] Attached SCSI disk [ 2839.536624] usb 1-3: USB disconnect, device number 8 [ 2844.620178] usb 10-1: new SuperSpeed USB device number 2 using xhci_hcd [ 2844.640281] scsi22 : usb-storage 10-1:1.0 [ 2850.326545] scsi 22:0:0:0: Direct-Access BUFFALO HD-PZU3 0001 PQ: 0 ANSI: 6 [ 2850.327560] sd 22:0:0:0: Attached scsi generic sg2 type 0 [ 2850.329561] sd 22:0:0:0: [sdb] 1953463728 512-byte logical blocks: (1.00 TB/931 GiB) [ 2850.329889] sd 22:0:0:0: [sdb] Write Protect is off [ 2850.329897] sd 22:0:0:0: [sdb] Mode Sense: 1f 00 00 08 [ 2850.330223] sd 22:0:0:0: [sdb] No Caching mode page present [ 2850.330231] sd 22:0:0:0: [sdb] Assuming drive cache: write through [ 2850.331414] sd 22:0:0:0: [sdb] No Caching mode page present [ 2850.331423] sd 22:0:0:0: [sdb] Assuming drive cache: write through [ 2850.384116] usb 10-1: USB disconnect, device number 2 [ 2850.392050] sd 22:0:0:0: [sdb] Unhandled error code [ 2850.392056] sd 22:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 2850.392061] sd 22:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 2850.392074] end_request: I/O error, dev sdb, sector 0 [ 2850.392079] quiet_error: 70 callbacks suppressed [ 2850.392082] Buffer I/O error on device sdb, logical block 0 [ 2850.392194] ldm_validate_partition_table(): Disk read failed. [ 2850.392271] Dev sdb: unable to read RDB block 0 [ 2850.392377] sdb: unable to read partition table [ 2850.392581] sd 22:0:0:0: [sdb] READ CAPACITY failed [ 2850.392584] sd 22:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 2850.392588] sd 22:0:0:0: [sdb] Sense not available. [ 2850.392613] sd 22:0:0:0: [sdb] Asking for cache data failed [ 2850.392617] sd 22:0:0:0: [sdb] Assuming drive cache: write through [ 2850.392621] sd 22:0:0:0: [sdb] Attached SCSI disk [ 2850.732182] usb 10-1: new SuperSpeed USB device number 3 using xhci_hcd [ 2850.752228] scsi23 : usb-storage 10-1:1.0 [ 2851.752709] scsi 23:0:0:0: Direct-Access BUFFALO HD-PZU3 0001 PQ: 0 ANSI: 6 [ 2851.754481] sd 23:0:0:0: Attached scsi generic sg2 type 0 [ 2851.756576] sd 23:0:0:0: [sdb] 1953463728 512-byte logical blocks: (1.00 TB/931 GiB) [ 2851.758426] sd 23:0:0:0: [sdb] Write Protect is off [ 2851.758436] sd 23:0:0:0: [sdb] Mode Sense: 1f 00 00 08 [ 2851.758779] sd 23:0:0:0: [sdb] No Caching mode page present [ 2851.758787] sd 23:0:0:0: [sdb] Assuming drive cache: write through [ 2851.759968] sd 23:0:0:0: [sdb] No Caching mode page present [ 2851.759977] sd 23:0:0:0: [sdb] Assuming drive cache: write through [ 2851.817710] sdb: sdb1 [ 2851.820562] sd 23:0:0:0: [sdb] No Caching mode page present [ 2851.820568] sd 23:0:0:0: [sdb] Assuming drive cache: write through [ 2851.820572] sd 23:0:0:0: [sdb] Attached SCSI disk [ 2852.060352] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2852.076533] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2852.076538] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2852.196329] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2852.212593] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2852.212599] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2852.456290] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2852.472402] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2852.472408] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2852.624304] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2852.640531] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2852.640536] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2852.772296] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2852.788536] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2852.788541] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2852.920349] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2852.936536] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2852.936540] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2853.072287] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2853.088565] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2853.088570] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2884.176339] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2884.192561] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2884.192567] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2884.320349] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2884.336526] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2884.336531] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2884.468344] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2884.484551] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2884.484556] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2884.612349] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2884.628540] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2884.628545] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2884.756350] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2884.772528] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2884.772533] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2884.848116] usb 10-1: USB disconnect, device number 3 [ 2884.851493] scsi 23:0:0:0: [sdb] killing request [ 2884.851501] scsi 23:0:0:0: [sdb] killing request [ 2884.851699] scsi 23:0:0:0: [sdb] Unhandled error code [ 2884.851702] scsi 23:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 2884.851708] scsi 23:0:0:0: [sdb] CDB: Read(10): 28 00 00 5f 2b ee 00 00 3e 00 [ 2884.851721] end_request: I/O error, dev sdb, sector 6237166 [ 2884.851726] Buffer I/O error on device sdb1, logical block 6237102 [ 2884.851730] Buffer I/O error on device sdb1, logical block 6237103 [ 2884.851738] Buffer I/O error on device sdb1, logical block 6237104 [ 2884.851741] Buffer I/O error on device sdb1, logical block 6237105 [ 2884.851744] Buffer I/O error on device sdb1, logical block 6237106 [ 2884.851747] Buffer I/O error on device sdb1, logical block 6237107 [ 2884.851750] Buffer I/O error on device sdb1, logical block 6237108 [ 2884.851753] Buffer I/O error on device sdb1, logical block 6237109 [ 2884.851757] Buffer I/O error on device sdb1, logical block 6237110 [ 2884.851807] scsi 23:0:0:0: [sdb] Unhandled error code [ 2884.851810] scsi 23:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 2884.851813] scsi 23:0:0:0: [sdb] CDB: Read(10): 28 00 00 5f 2c 2c 00 00 3e 00 [ 2884.851824] end_request: I/O error, dev sdb, sector 6237228 [ 2885.168190] usb 10-1: new SuperSpeed USB device number 4 using xhci_hcd [ 2885.188268] scsi24 : usb-storage 10-1:1.0 Please help me with my problem. I got this after running dmesg.

  Read the article

• How to get my laptop to detect SD cards inserted into its built-in card reader?

  - by Candelight

  My laptop has a built-in SD Card reader but it cannot detect one when inserted. Here is the result when I type lspci from the terminal: 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:07.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller (rev 80) 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80) 00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 83) 00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller (rev 80) 00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller (rev 01) 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress 200M] 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 05:04.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 05:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01) 05:04.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) 05:09.0 Network controller: Ralink corp. RT2561/RT61 rev B 802.11g

  Read the article

• Determine formatting of SD card in Ubuntu

  - by ben

  How do I, in Ubuntu, determine what the formatting (e.g FAT etc.) of an SD card is? Thanks.

  Read the article

• Mount "locked" SD card as read-write in GNU/Linux

  - by Vi

  My Canon PowerShot A470 + CHDK can write to SD-cards that are "locked" (the lock switch is used to make the card bootable), but GNU/Linux `/dev/mmcblk1': Read-only file system (I'm using "Texas Instrument 5-in-1 Multimedia Card Reader") So I have to switch that switch on and off again and again. ("unlocked" to write to the card in Linux, "locked" to boot the camera from it). How to force locked card to be writable in GNU/Linux?

  Read the article

• Reformat SD card to NTFS

  - by Dawn Milford

  I want to reformat a 16G SD card to NTFS so that I can use to transfer large files (larger than 4G) from one computer to another easily but my computer will only allow FAT variations. HELP!!

  Read the article

• How to access an SD card from a virtual machine?

  - by Punit Soni

  I want to format an SD card from my Linux virtual machine. I have a built-in SD card reader in my laptop. I tried using VirtualBox and VMware Player and installed Ubuntu 10.04 guest. None of them are showing the SD card reader as a device. I can access the SD card from the Windows host. I am not interested in solutions using shared folders as I want to access the SD card as hardware (it should show up in /dev). I basically want to set up the SD card for BeagleBoard, but I don't want to install physical Ubuntu in my PC.

  Read the article

• IOCTL call error when trying to format an SD card

  - by masfenix

  Found an SD card (1GB) lying around. Thought I might pop that into my card reader and see if anything is on it. Nothing. There isn't even a file system on it. I right-click and go "format" but nothing happens. So I try in command. > format f: Insert new disk for drive F: and press ENTER when ready... Error in IOCTL call. What does this mean?

  Read the article

• Cannot format SD memory card

  - by cool

  Hello everyone I have a SD memory card which is of local manufacturer it allows to read & copy from it but not write as it is now write-protected so i want to format that card but could not. To format this card I have tried 1) DD command 2) mkfs -f vfat command 3) creating registry entry under storage device policy in window with write value 0 4) disk part command in window to clear attributes in which it show all attributes are clear ie no write protection 5) I format card in windows through control panel - administrative tools- computer management - disk management, then it show as formatted but when I tried to create new partition it give CYCLIC REDUNDANCY CHECK error 6) I downloaded a format utility from transcend site and formatted first it shows write protected again doing format it formats and tells to remove and reinsert after reinsertion it shows the previous data as it is

  Read the article

• recover lost files from sd card(digital camera)

  - by user23950

  How do I recover lost data from sd card? I already tried using: Photorec Recuva Tune up undelete Pareto data recovery chkdsk x: /F from here: http://superuser.com/questions/128259/how-to-recover-images-from-memory-card But none of them worked. I think I've only lost the data yesterday. And I haven't used the camera. So there's a possibility that it is still there. But the question is how I can recover the images? I think its lost when I tried to connect the digicam with the computer. But the camera froze so I tried to remove the batteries then try again.

  Read the article

• my LaCie 500 Gb not mounted on 11.10

  - by pooo

  My external USB drive was recognized with 10.x versions of Ubuntu but since 11.x I am getting stuck, I had tried everything I read in forums but still the same error: 4956.401052] usb 2-1.4: new high speed USB device number 14 using ehci_hcd [ 4956.539216] scsi14 : uas [ 4956.740955] scsi 14:0:0:0: Direct-Access LaCie Rugged FW USB3 1081 PQ: 0 ANSI: 4 [ 4963.256055] scsi 14:0:0:0: uas_eh_abort_handler tag 0 [ 4963.256076] scsi 14:0:0:0: uas_eh_device_reset_handler tag 0 [ 4963.256085] scsi 14:0:0:0: uas_eh_target_reset_handler tag 0 [ 4963.256091] scsi 14:0:0:0: uas_eh_bus_reset_handler tag 0 [ 4963.328122] usb 2-1.4: reset high speed USB device number 14 using ehci_hcd [ 4963.468743] scsi 14:0:0:0: Device offlined - not ready after error recovery [ 4963.468813] scsi 14:0:0:0: rejecting I/O to offline device [ 4963.468831] scsi 14:0:0:0: rejecting I/O to offline device [ 4963.469204] scsi 14:0:0:1: uas_sense_old: urb length 26 disagrees with IU sense data length 510, using 18 bytes of sense data [ 4963.512104] sd 14:0:0:0: Attached scsi generic sg3 type 0 [ 4994.253779] sd 14:0:0:0: uas_eh_abort_handler tag 0 [ 4994.253802] sd 14:0:0:0: uas_eh_device_reset_handler tag 0 [ 4994.253809] sd 14:0:0:0: uas_eh_target_reset_handler tag 0 [ 4994.253815] sd 14:0:0:0: uas_eh_bus_reset_handler tag 0 [ 4994.325880] usb 2-1.4: reset high speed USB device number 14 using ehci_hcd [ 4994.466488] sd 14:0:0:0: Device offlined - not ready after error recovery [ 4994.466555] sd 14:0:0:0: rejecting I/O to offline device [ 4994.466573] sd 14:0:0:0: rejecting I/O to offline device [ 4994.466582] sd 14:0:0:0: rejecting I/O to offline device [ 4994.466588] sd 14:0:0:0: [sdc] READ CAPACITY failed [ 4994.466593] sd 14:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 4994.466600] sd 14:0:0:0: [sdc] Sense not available. [ 4994.466608] sd 14:0:0:0: rejecting I/O to offline device [ 4994.466616] sd 14:0:0:0: [sdc] Write Protect is off [ 4994.466622] sd 14:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 4994.466629] sd 14:0:0:0: rejecting I/O to offline device [ 4994.466635] sd 14:0:0:0: [sdc] Asking for cache data failed [ 4994.466640] sd 14:0:0:0: [sdc] Assuming drive cache: write through [ 4994.467003] sd 14:0:0:0: [sdc] Attached SCSI disk if I am trying on an old ubuntu, the drive is mounted,

  Read the article

• Recover data from SD card

  - by Paul Tarjan

  I have a 2GB kingston microSD card which is about 3 years old. I put it in a reader today in my Windows Vista computer, wrote a 32MB file onto it, safely removed it, and then tried to read it elsewhere. Nothing. Putting it back in vista it now says You need to format the disk in drive F: before you can use it. What should I do? I have access to many computers and OSes if your recommendations need that. I would be very sad if I lost all the contents of the card. Most of the data is backed up, but there are a few things that aren't. :( Doing a # dd if=/dev/sdg of=~/tmp/sd.bin gives me a 2 gig file, and grepping the file it seems like lots of my data is still there, how can I put it back together?

  Read the article

• Virtual Sd-card won't transfer [migrated]

  - by Hyztname

  I have a Verizon Galaxy Nexus 32GB. I've installed AOKP on it and it has been running pretty okay with no bugs etc... But after I connected it too my Nintendo Wii I think it mounted sdcard as FAT32 itself :\ I'm receiving the following error when trying to download something from 4Shared sync app(But actually none can download or transfer anything to Virtual sdcard): XXXXX.apk: open failed: EACCES(Permission denied) I already restored my old backup wiped all data etc, nothing seems to work. Note that I can access my sd-card, i can't only transfer, take pics... basically data. PS: I showed 4sync problem because it was the only one that specify something

  Read the article

• Copying SD Cards with "LaCie d2 Network"

  - by rjstelling

  The LaCie d2 Network has a feature where by you can attach a USB drive and press the blue button at the from and it will copy the drive contents (no computer required). (See this review for more info). USB 2.0 and eSATA ports are also provided but these are not designed for extending the d2 Network's storage. Rather, they allow you to connect portable drives for uploading their data to the d2 Network directly. The process is quite slick, too: just plug in a drive and press the big blue button on the front of the unit to trigger an immediate upload. This copies over everything on the external device and seems ideal for camera use. Is it possible to use an microSD or SD card adapter (like the Kingston MobileLite 9-in-1) and copy the contents of the card? I'm assuming the card reader just "looks like" a normal USB flash drive the computer or (in this case) LaCie d2 Network. Is this assumption correct? Do you know any reason why this won't work?

  Read the article

• Choice of filesystem for GNU/Linux on an SD card

  - by gspr

  Hi. I have am embedded ARM-based system running on an SD card. It's currently Debian GNU/Linux using ext3 as filesystem. As I'm about to reinstall the system, I started wondering about changing to a more flash-friendly filesystem. I've heard about JFFS2, YAFFS2 and LogFS, and they all seem suited to the job. Which one would you recommend? Also, I've heard there have been a lot of ext4 improvements to better suit SSD disks; am I to interpret that as running ext4 should be just fine? What do I need to think especially about in that case? I guess the usage of the system is important. But for the sake of generality, imagine it'll do standard desktop stuff (even though it is infact a small ARM-based system). Thanks for any replies. Edit: Wikipedia tells me (in a "citation needed" statement) that Removable flash memory cards and USB flash drives have built-in controllers to perform wear leveling and error correction so use of a specific flash file system does not add any benefit. Thus, I'm leaning towards sticking with an ext filesystem.

  Read the article

• micro-SD card initialization using SPI interface

  - by Ron

  I'm using a micro-SD card in an embedded design. The card is connected to a microcontroller using the SPI interface. It worked fine for all cards I've used before, but now my new card will not initialize. The card is a Transcend 2GB micro-SD card (TS2GUSD). After sending the initial clock train to switch to SPI mode I do the following: 1) CMD0 (Argument 0, CRC 0x95) - Response 0x01 - OK 2) CMD8 (Argument 0x000001AA, CRC 0x87) - Response 0x01 0x000001AA - Means it's SDC V2+ card, the Voltage range 2.7V~3.6V is supported - OK Then I should send the ACMD41 command, but when sending the CMD55 (argument 0, CRC 0) that must precede CMD41, I get response 0x05 - Illegal Command. I've also tried to send CMD1 (for MMC cards), but it gives a similar Illegal Command response. The code works fine with my Sandisk 2GB micro-SD card. Does anyone have any idea? Thanks, -Ron-

  Read the article

• Only recognizes one partition from multi partitions SD card

  - by Jay Ngo

  Hello everybody, I split my sd card into 2 partitions. When i use usb-card-reader to read my sd card, only the one partition shows up on the screen, the other doesn't. I have run the command "sudo fdisk -l" and the result is the same, only one partition is recognized. But i do believe both partitions of my sd card work fine, because i still can boot my single-board computer with that sd card and run some programms, which are inside that unreadable partition. How can i access both partitions of my sd card? Does anyone know how to solve this kind of problem? I really appreciate your help.

  Read the article

• Only recognizes one of multiple partitions on SD card

  - by Jay Ngo

  Hello everybody, I split my sd card into 2 partitions. When i use usb-card-reader to read my sd card, only the one partition shows up on the screen, the other doesn't. I have run the command "sudo fdisk -l" and the result is the same, only one partition is recognized. But i do believe both partitions of my sd card work fine, because i still can boot my single-board computer with that sd card and run some programms, which are inside that unreadable partition. How can i access both partitions of my sd card? Does anyone know how to solve this kind of problem? I really appreciate your help.

  Read the article

• Ubuntu only recognizes one partition from multi partitions SD card

  - by Jay Ngo

  Hello everybody, I split my sd card into 2 partitions. When i use usb-card-reader to read my sd card, only the one partition shows up on the screen, the other doesn't. I have run the command "sudo fdisk -l" and the result is the same, only one partition is recognized. But i do believe both partitions of my sd card work fine, because i still can boot my single-board computer with that sd card and run some programms, which are inside that unreadable partition. How can i access both partitions of my sd card? Does anyone know how to solve this kind of problem? I really appreciate your help.

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >