Search Results

Search found 333 results on 14 pages for 'catalyst'.

Page 2/14 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Cisco Catalyst 3750 connected to Cisco ASA 5505 and dropping packets

    - by Bo102010
    (Cross posted from Super User per suggestion there) At the office, I have inherited a network that I am still trying to fully comprehend. I have a problem today with a new connection between: A port on a Cisco Catalyst 3750 [WS-C3750G-48TS-S running C3750-IPSERVICESK9-M version 12.2(53)SE1] A port on a Cisco ASA 5505 [ASA Software version 8.3(2)] The 3750 is home to a Vlan that has a few ports assigned to it. interface Vlan3 description Internal network (172.18.160.0/24) ip address 172.18.160.1 255.255.255.0 I have a host (outside of my control) that needs to be in this VLAN (i.e it must have an address 172.18.160.something/24) that also needs to access the Internet. To accomplish this, I ran a link from the Catalyst (Gi1/0/13) to the ASA (Ethernet 0/5). I configured the Catalyst port like so: interface GigabitEthernet1/0/13 description To ASA, 172.18.160.69 switchport access vlan 3 switchport mode access speed 100 duplex full I configured the ASA like so: interface Vlan1 nameif inside security-level 100 ip address 172.18.160.69 255.255.255.0 interface Ethernet0/5 speed 100 duplex full Then I plugged the host into Ethernet 0/4 on the ASA and instructed its owner to make its default gateway 172.18.160.69. I made a NAT rule in the ASA and set up some rules, and it's able to access the Internet without issue. However, I noticed that the Catalyst reports a ton of packets being dropped toward the ASA. Catalyst3750#show interfaces GigabitEthernet 1/0/13 | include counters|drops Last clearing of "show interface" counters 00:28:13 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 136909347 This is a huge number of drops, since there's not much traffic on this VLAN at all. I tried these things: Make sure speed and duplex agree on both sides (100 Mbps / Full) Set no cdp enable on the Catalyst Gi10/13 Set no keepalive on the Catalyst Gi10/13 Checked for excessive CPU usage on both Checked for excessive traffic on both Am I missing something? Any help would be appreciated.

    Read the article

  • Ubuntu 13.10 AMD/ATI proprietary driver slow boot time, black screen after logging in and lengthy login/logout delays

    - by NahsiN
    Ubuntu 13.10 is causing me major headaches with my AMD/ATI HD 5770 GPU. Below is a list of problems I am currently encountering. 1) The boot time is extended by at least 25s after installing catalyst 13.4. Using open source radeon drivers, my boot time till the login screen is ~10s. With catalyst 13.4 installed, the boot time increases to ~35s. This was not the case in Ubuntu 13.04, 12.10 or 12.04. I have done the driver installation manually (instructions from wiki.cchtml.com) and using software center and there is no difference. I have not tried the catalyst 13.8 beta driver. 2) After manual installation of catalyst 13.4, I get stuck at a black screen after logging in. I have to purge fglrx to resolve the problem. I tried sudo amdconfig --initial -f but it didn't help. 3) The delay between logging in and unity being displayed is ~10-15s for BOTH open source and proprietary drivers. During the delay, it's just a black screen. Whenever I logout, there is again a ~10-15s delay with the login screen appearing stuck before lightdm allows me to enter my password again. This is ridiculous! Yes, I could stick with open source radeon drivers but I would like to install Steam and play my Valve collection on the machine. Is anybody else encountering similar issues?

    Read the article

  • Ubuntu 13.10 AMD/ATI proprietary driver slow boot time, lengthy login/logout delays

    - by NahsiN
    Ubuntu 13.10 is causing me major headaches with my AMD/ATI HD 5770 GPU. Below is a list of problems I am currently encountering. 1) The boot time is extended by at least 25s after installing catalyst 13.4. Using open source radeon drivers, my boot time till the login screen is ~10s. With catalyst 13.4 installed, the boot time increases to ~35s. This was not the case in Ubuntu 13.04, 12.10 or 12.04. I have done the driver installation manually (instructions from wiki.cchtml.com) and using software center and there is no difference. I have not tried the catalyst 13.8 beta driver. 2) After manual installation of catalyst 13.4, I get stuck at a black screen after logging in. I have to purge fglrx to resolve the problem. I tried sudo amdconfig --initial -f but it didn't help. 3) The delay between logging in and unity being displayed is ~10-15s for BOTH open source and proprietary drivers. During the delay, it's just a black screen. Whenever I logout, there is again a ~10-15s delay with the login screen appearing stuck before lightdm allows me to enter my password again. This is ridiculous! Yes, I could stick with open source radeon drivers but I would like to install Steam and play my Valve collection on the machine. Is anybody else encountering similar issues?

    Read the article

  • Setup dual screen with Catalyst Control Center on notebook so that nothing changes when closing lid (case) ?

    - by Tom
    I have setup a dualscreen setup for my notebook with an ATI video card (ATI mobility radeon hd 5470) using Catalyst Control Center. The monitor extends the desktop of the notebook's screen. This works great. I am running on windows 7 and have set it up to not do anything when I close my laptop's lid (case) other than dim the notebook's display. However, when I do close the lid (notebook's display), the second monitor suddenly changes and I believe it starts behaving as the primary monitor.. I do not want this to happen. So, how do I setup my dualscreen setup so that it won't set the secondary monitor as the primary one when I close my laptop's lid? UPDATE: this video shows exactly what my problem is: http://www.youtube.com/watch?v=Q1ygNHbqI2g

    Read the article

  • Installing Catalyst 11.6 for an ATI HD 6970

    - by David Oliver
    Ubuntu Maverick 10.10 is displaying the desktop okay (though limited to 1600x1200) after my having installed my new HD 6970 card, so I'm now trying to install the proprietary driver (I understand the open source one requires a more recent kernel than that in Maverick). The proprietary driver under 'Additional Drivers' resulted in a black screen on boot, so I deactivated and am trying to follow the manual install instructions at the cchtml Ubuntu Maverick Installation Guide. When I try to create the .deb packages with: sh ati-driver-installer-11-6-x86.x86_64.run --buildpkg Ubuntu/maverick I get: david@skipper:~/catalyst11.6$ sh ati-driver-installer-11-6-x86.x86_64.run --buildpkg Ubuntu/maverick Created directory fglrx-install.oLN3ux Verifying archive integrity... All good. Uncompressing ATI Catalyst(TM) Proprietary Driver-8.861......................... ===================================================================== ATI Technologies Catalyst(TM) Proprietary Driver Installer/Packager ===================================================================== Generating package: Ubuntu/maverick Package build failed! Package build utility output: ./packages/Ubuntu/ati-packager.sh: 396: debclean: not found dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package fglrx-installer dpkg-buildpackage: source version 2:8.861-0ubuntu1 dpkg-buildpackage: source changed by ATI Technologies Inc. <http://ati.amd.com/support/driver.html> dpkg-source --before-build fglrx.64Vzxk dpkg-buildpackage: host architecture amd64 debian/rules build Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507. dpkg-buildpackage: error: debian/rules build failed with unknown exit code -1 Cleaning in directory . /usr/bin/fakeroot: line 176: debian/rules: Permission denied debuild: fatal error at line 1319: couldn't exec fakeroot debian/rules: dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package fglrx-installer dpkg-buildpackage: source version 2:8.861-0ubuntu1 dpkg-buildpackage: source changed by ATI Technologies Inc. <http://ati.amd.com/support/driver.html> dpkg-source --before-build fglrx.QEmIld dpkg-buildpackage: host architecture amd64 debian/rules build Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507. dpkg-buildpackage: error: debian/rules build failed with unknown exit code -1 Cleaning in directory . Can't exec "debian/rules": Permission denied at /usr/bin/debuild line 1314. debuild: fatal error at line 1313: couldn't exec debian/rules: Permission denied dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package fglrx-installer dpkg-buildpackage: source version 2:8.861-0ubuntu1 dpkg-buildpackage: source changed by ATI Technologies Inc. <http://ati.amd.com/support/driver.html> dpkg-source --before-build fglrx.xtY6vC dpkg-buildpackage: host architecture amd64 debian/rules build Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507. dpkg-buildpackage: error: debian/rules build failed with unknown exit code -1 Cleaning in directory . /usr/bin/fakeroot: line 176: debian/rules: Permission denied debuild: fatal error at line 1319: couldn't exec fakeroot debian/rules: dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package fglrx-installer dpkg-buildpackage: source version 2:8.861-0ubuntu1 dpkg-buildpackage: source changed by ATI Technologies Inc. <http://ati.amd.com/support/driver.html> dpkg-source --before-build fglrx.oYWICI dpkg-buildpackage: host architecture amd64 debian/rules build Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507. dpkg-buildpackage: error: debian/rules build failed with unknown exit code -1 Removing temporary directory: fglrx-install.oLN3ux I've installed devscripts which has debclean in it. I've tried running the command with and without sudo. I'm not experienced with installing from downloads/source, but it seems like the file debian/source isn't being set to be executable when it needs to be. If I extract only, without using the package builder command, debian/rules is 744. As to what to do next, I'm stumped. Many thanks.

    Read the article

  • Ubuntu 11.10, FF 11, ATI Catalyst v12.2, Driver Package version 8.95, WebGL doesn't work

    - by Victor S
    I'm running Ubuntu 11.10, FF 11, ATI Catalyst v12.2, Driver Package version 8.95, WebGL doesn't work. This is a pretty capable setup and definetly did have FF work previously, Note: I've downloaded and installed the ATI drivers from AMD. Not sure how to get WebGL working. Updated My video card info: 01:00.0 VGA compatible controller: ATI Technologies Inc Cypress [Radeon HD 5800 Series] (prog-if 00 [VGA controller]) Subsystem: ATI Technologies Inc Device 0b00 Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fbee0000 (64-bit, non-prefetchable) [size=128K] I/O ports at d000 [size=256] Expansion ROM at fbec0000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Legacy Endpoint, MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Capabilities: [150] Advanced Error Reporting Kernel driver in use: fglrx_pci Kernel modules: fglrx, radeon

    Read the article

  • ATI catalyst and additional drivers have vanishe d after update (8/9/2012)

    - by Obada Talal Abu Arisheh
    ok, I have my ATI Radeon 2400XT working properly for longtime on ubuntus (8.04 - 12.04) and recently when I was trying to update (it installs kernal 3.2.0-31 during that update) every think related to ATI including property drivers (that can be activated from additional drivers) are vanished so AMD catalyst control center is not working (it says no amd graphics card is installed) and when opening [additional drivers] it loads and then a box is appear saying (Downloading package indexes failed, please check your network status. Most drivers will not be available.) after searching for additional drivers the window appear saying (no property driver are used on this system). I don't know what happened really! I don't know how to fix this problem either. help!!

    Read the article

  • Probelm with ATI catalyst drivers in ubuntu 13.10

    - by Raja
    Recently I've installed dual boot ubuntu 13.10 alongside windows 8. My Laptop is Dell Inspiron 15, with AMD Radeon HD 7670 Video Card. Without fglrx my battery is draining to 1:30 hrs from 3:30hrs (In Ubuntu 13.04 but very slow booting ) so I installed fglrx using What is the correct way to install ATI Catalyst Video Drivers (fglrx)? But the problem is as you all know, Black Screen after logging into ubuntu. Tried so many solutions for this like reinstalling unity , ubuntu-desktop , compizconfig , etc.. but none helped except removing fglrx* completely. (But I need them very badly due to battery) Assuming that all hope is lost., Posting here as a final try.! Will be highly greatfull for those who helped :) PS : For those who think this question is a duplicate., Though the question may be a duplicate, but the answer is not! (so give me a assured solution for this problem before flagging this as duplicate., Kindly understand my frustation) Thank You !

    Read the article

  • Catalyst 12.1 for AGP card

    - by Brian
    I have a Radeon HD 4650 AGP card. The installation instructions at http://wiki.cchtml.com/index.php/Ubuntu_Oneiric_Installation_Guide download catalyst 12.1 However, there is no download available at http://support.amd.com/us/gpudownload/Pages/index.aspx for my AGP card. Only Windows drivers are available. Should I go ahead and use the guide and manually install 12.1? I assume it's not on the amd website for a reason, but I was wondering if anybody had any experience with this. Thanks!

    Read the article

  • Need help with AMD catalyst control center

    - by user254074
    I just built my first HTPC and I hooked it up to my Sony KDS-R60XBR1 and I am having display issues. I believe this is only a 1080i display and when I select 1920x1080 on the resolution I get strange lines on the display when anything moves on screen. I am guessing this is because it is putting it in 1080p and the TV cannot process that. As of now I have lowered the resolution and that worked but I would like to get this set at 1080. Also I cannot change the underscan. I am stuck with black borders around the display image. When I pull up the catalyst control center on my computer I am able to adjust all of this stuff but on the one on my HTPC with the TV display I have no options. See images below.

    Read the article

  • ATI Radeon HD with Catalyst driver stuck mirroring screens

    - by Mike Axiak
    In 11.10 I replaced my aging Nvidia card with a new Radeon HD 6970 card. The single card has two DVI output ports which I've connected to two monitors. I installed Catalyst version 11.9 and I cannot get multiple monitors set up the way I want. I tried: $ sudo amdcccle and setting the mode to single desktop multiple monitors and whenever I do that Unity crashes and I get back to the login screen. Nothing shows up in the Xorg.*.log files for me to post here. There's only one card so I don't think xinerama would be any help here. Anyone have any ideas? EDIT: Here's my xorg.conf file: Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "0-DFP3" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x1024" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x1024" Option "TargetRefresh" "75" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" Option "Monitor-DFP3" "0-DFP3" Option "Monitor-CRT1" "0-CRT1" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "amdcccle-Device[5]-1" Driver "fglrx" Option "Monitor-DFP3" "0-DFP3" BusID "PCI:5:0:0" Screen 1 EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" DefaultDepth 24 SubSection "Display" EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[5]-1" Device "amdcccle-Device[5]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

    Read the article

  • Arch linux - strange behaviour after installing fglrx

    - by kosto
    I have a problem with drivers on arch linux. I installed catalyst through unnoficial catalyst repo as wiki says. pacman -S catalyst catalyst-utils aticonfig --initial After this operation i rebooted the system. KDM loaded succesfully, but when i tried to switch to console (ctrl+alt+1/2/3) i saw only some strange dots, like pixels from the text were splitted on the whole screen. I was able to go back to kdm and enter the account details tho. This gave me a hang just before kde loaded. Here's a video where i'm showing above actions. Anybody knows what caused the problem? I can still chroot to fix some issues. Thanks for interest. http://glothriel.org/arch/arch_problem.ogg same thing on gnome / gdm, that's my second try on installing catalyst on arch. Open drivers suck the battery 2x faster. ___________EDIT_____________ Ok, i found a sollution, so i'm posting if someone else shares my problem. Catalyst does not support KMS, so you need to disable it from grub. You must know where are your /etc and /boot paritions mounted. If you have only one partition for / it's even simplier. Mount / on /mnt mount /dev/sdaX /mnt where X is number of the partition where is your / installed arch-chroot /mnt nano /etc/default/grub and add line: GRUB_CMDLINE_LINUX="nomodeset" save and quit then run (this will delete your windows grub configuration) grub-mkconfig -o /boot/grub/grub.cfg exit umount /mnt reboot

    Read the article

  • How do I connect to and factory reset a Catalyst 3560 Switch?

    - by Josh
    My company just bought another company. In their server room they had some older hardware, which I would like to repurpose. One of these is a Cisco Switch: C3560G-48TS-S. I found some instructions about this switch here but this is not a guide for a beginner. I have no idea how to connect to this thing to begin running the commands. It says Configure the PC terminal emulation software for 9600 baud, 8 data bits, no parity, 1 stop bit, and no flow control. But I can't find anything on how to do this (assuming with telnet?) or even what program to use. I also don't know how to find the IP address of the device to connect to it. My research also says once I get in there, I need to run clear config all Is this the right command? Also, what if I can't get the username and password for these devices? Is there some way to factory reset (my only experience is with devices that have a hardware reset button) EDIT: I should note that when I push the button on the front the three lights blink, which according to the documentation indicated the switch is configured and "not available for express setup"

    Read the article

  • Unable to overscan at lower resolution with AMD ATI

    - by Basavaraj
    I am running Ubuntu 12.04 with the latest ATI drivers installed. I have the catalyst option but I am unable to set overscan. My default resolution is 1920*1080 on 15inch display. I want to set it to a lower resolution. But on setting it to any lower resolution the display shrinks i.e I see black chopped off display on the left and on the right :( Really frustrating this, wasted hours on this already. I realized that this is referred to as overscan, but the ATI Catalyst Administrative just does not allow me to set the option. Can someone please through some light on this topic?

    Read the article

  • Ubuntu 12.10 AMD/Intel Hybrid Graphics not working

    - by Marian Lux
    On Ubuntu 12.04 my Sony Vaio VPCSE with Intel® HD Graphics 3000 and AMD Radeon™ HD 6630M worked fine with the Catalyst Control Center version 12.6. Also the switching between integrated and discrete graphic card was working. In both cases, I followed this tutorial. But it is not working on Ubuntu 12.10. I tested the tutorial with the Catalyst Control Center from the Ubuntu Software Center, the version 12.8 and version 12.9. Always the same problem: After installation process I am able to boot in the login-screen. But after entering the password for my username, only the background-image appears. Unity seems not to be starting. I am only able to reach the context-menu by right clicking the mouse button. I also tried his fix, but is also does not work for me. Any ideas what to do to fix this problem?

    Read the article

  • Swichable Graphics

    - by user67291
    Im having a bit of a problem with my 2 graphic card in my laptop. laptop: Acer Aspire 5553g Graphic Cards: Performance: ATI Mobility Radeon HD 5650 Power saving: ATI Radeon HD 4200. On this laptop i have used ubuntu 11.04, then upgraded to 11.11, and now upgraded to 12.04 the other day. The problem is that sins i upgraded to 12.04 im unable to switch to my performance graphic card using the Catalyst Control Center. Under 11.04 and 11.11 it was no problem. I open the Catalyst Control Center and select the performance option then apply, it tels me that it will be applied after reboot, I reboot and nothing has changed. Im able to "force" it by changing in BIOS, so i know there is nothing wrong with the card. Thanks /Daan

    Read the article

  • Chrome and Catalyst - no tab text

    - by Martin Fejes
    I just installed Ubuntu, updated, installed AMD proprietary drivers (for my Radeon HD6870) and noticed that some (most) of the tabs in Google Chrome don't have text, only the favicon. My first idea was that maybe 13.10 may have some issues with the new drivers so I switched to the normal driver instead of the beta one. It was not good. Okay then, I put back the open source drivers. It worked. Okay, it's strange. Let's install Ubuntu Gnome to see if it's Unity. No it was not. Let's install Ubuntu 13.04. Same behavoir. By this time I was desperate. I installed Fedora, the problem was there. Now I'm back to Ubuntu 13.10, but am out of ideas. Could anyone help me, please? P.s.: I can upload a screenshot, if needed.

    Read the article

  • AMD Catalyst Beta Open Source Drivers

    - by FourZer0
    I'm a gamer with a pretty low-end computer, so I always update to the beta drivers to squeeze out every bit of performance I can get. I currently have 13.3 installed, but I want to install the 14.6 beta. I want to use the open source version, instead of downloading from AMD's website. How can I do that in the terminal? And please explain what the commands mean so I can do it on my own in the future. Thanks in advance!

    Read the article

  • How to install Radeon 3670 HD graphics drivers for Ubuntu 10.04 64 bit with OpenGL 2.0 support?

    - by Daniel
    I've been having trouble with getting graphics drivers to work that support OpenGL 2.0. I've had some luck with the Ubuntu drivers, however these only support OpenGL 1.3. I thought I would document the methods that I have tried both to see if anyone else has ideas, and to save time for people with a similar problem. System details: Ubuntu 10.04 (Lucid) 64 bit Kernel Linux 2.6.32-44-generic GNOME 2.30.2 ATI Mobility Radeon HD 3670 Attempted Methods The methods I have tried are: 1. Installing Proprietary Drivers using the "Hardware Drivers" (Jockey) GUI This GUI offers an "ATI/AMD proprietary FGLRX graphics driver" however any attempts to install it result in a "Sorry, installation of this driver failed" error. The log file is here. There is an Ask Ubuntu question that covers this scenario, and notes that there is a known bug with Jockey. 2. Installing the Proprietary Drivers manually The answer to the question above linked to this wiki page, which gives instructions for installing Catalyst 12.6. This supported hardware list states that the 3670 is not supported in 12.6, and 12.4 must be used. This is somewhat confusing, as AMD's website suggests that the 12.6 driver should be installed for the 3670. There have been user reports that R600 (the GPU inside the 3670 card) doesn't work with 12.6, so I'm sticking with 12.4. I'm following these instructions to install the proprietary drivers on Lucid. I downloaded the 12.4 driver from the AMD website. Building the package worked fine, generating the fglrx, fglrx-dev, fglrx-amdcccle, and fglrx-modaliases deb packages successfully. However, when I try to install these using dpkg it gives me these errors. The make log referenced in the error is here. Ask Ubuntu References What is the correct way to install ATI Catalyst Video Drivers? Cannot install ATI/AMD FGLRX restricted graphic drivers Is my ATI graphics card supported in Ubuntu?

    Read the article

  • How can I introduce a regex action to match the first element in a Catalyst URI ?

    - by RET
    Background: I'm using a CRUD framework in Catalyst that auto-generates forms and lists for all tables in a given database. For example: /admin/list/person or /admin/add/person or /admin/edit/person/3 all dynamically generate pages or forms as appropriate for the table 'person'. (In other words, Admin.pm has actions edit, list, add, delete and so on that expect a table argument and possibly a row-identifying argument.) Question: In the particular application I'm building, the database will be used by multiple customers, so I want to introduce a URI scheme where the first element is the customer's identifier, followed by the administrative action/table etc: /cust1/admin/list/person /cust2/admin/add/person /cust2/admin/edit/person/3 This is for "branding" purposes, and also to ensure that bookmarks or URLs passed from one user to another do the expected thing. But I'm having a lot of trouble getting this to work. I would prefer not to have to modify the subs in the existing framework, so I've been trying variations on the following: sub customer : Regex('^(\w+)/(admin)$') { my ($self, $c, @args) = @_; #validation of captured arg snipped.. my $path = join('/', 'admin', @args); $c->request->path($path); $c->dispatcher->prepare_action($c); $c->forward($c->action, $c->req->args); } But it just will not behave. I've used regex matching actions many times, but putting one in the very first 'barrel' of a URI seems unusually traumatic. Any suggestions gratefully received.

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >