Search Results

Search found 41 results on 2 pages for 'comms'.

Page 2/2 | < Previous Page | 1 2 

  • What's a good Java-based Master-Slave communication mechanism?

    - by plecong
    I'm creating a Java application that requires master-slave communication between JVMs, possibly residing on the same physical machine. There will be a "master" server running inside a JEE application server (i.e. JBoss) that will have "slave" clients connect to it and dynamically register itself for communication (that is the master will not know the IP addresses/ports of the slaves so cannot be configured in advance). The master server acts as a controller that will dole work out to the slaves and the slaves will periodically respond with notifications, so there would be bi-directional communication. I was originally thinking of RPC-based systems where each side would be a server, but it could get complicated, so I'd prefer a mechanism where there's an open socket and they talk back and forth. I'm looking for a communication mechanism that would be low-latency where the messages would be mostly primitive types, so no serious serialization is necessary. Here's what I've looked at: RMI JMS: Built-in to Java, the "slave" clients would connect to the existing ConnectionFactory in the application server. JAX-WS/RS: Both master and slave would be servers exposing an RPC interface for bi-directional communication. JGroups/Hazelcast: Use shared distributed data structures to facilitate communication. Memcached/MongoDB: Use these as "queues" to facilitate communication, though the clients would have to poll so there would be some latency. Thrift: This does seem to keep a persistent connection, but not sure how to integrate/embed a Thrift server into JBoss WebSocket/Raw Socket: This would work, but require a lot more custom code than I'd like. Is there any technology I'm missing? Edit: Also looked at: JMX: Have the client connect to JBoss' JMX server and receive JMX notifications for bidirectional comms.

    Read the article

  • Unable to get data from a WCF client

    - by Scott
    I am developing a DLL that will provide sychronized time stamps to multiple applications running on the same machine. The timestamps are altered in a thread that uses a high performance timer and a scalar to provide the appearance of moving faster than real-time. For obvious reasons I want only 1 instance of this time library, and I thought I could use WCF for the other processes to connect to this and poll for timestamps whenever they want. When I connect however I never get a valid time stamp, just an empty DateTime. I should point out that the library does work. The original implementation was a single DLL that each application incorporated and each one was synced using windows messages. I'm fairly sure it has something to do with how I'm setting up the WCF stuff, to which I am still pretty new. Here are the contract definitions: public interface ITimerCallbacks { [OperationContract(IsOneWay = true)] void TimerElapsed(String id); } [ServiceContract(SessionMode = SessionMode.Required, CallbackContract = typeof(ITimerCallbacks))] public interface ISimTime { [OperationContract] DateTime GetTime(); } Here is my class definition: [ServiceBehavior(InstanceContextMode = InstanceContextMode.Single)] public class SimTimeServer: ISimTime The host setup: // set up WCF interprocess comms host = new ServiceHost(typeof(SimTimeServer), new Uri[] { new Uri("net.pipe://localhost") }); host.AddServiceEndpoint(typeof(ISimTime), new NetNamedPipeBinding(), "SimTime"); host.Open(); and the implementation of the interface function server-side: public DateTime GetTime() { if (ThreadMutex.WaitOne(20)) { RetTime = CurrentTime; ThreadMutex.ReleaseMutex(); } return RetTime; } Lastly the client-side implementation: Callbacks myCallbacks = new Callbacks(); DuplexChannelFactory pipeFactory = new DuplexChannelFactory(myCallbacks, new NetNamedPipeBinding(), new EndpointAddress("net.pipe://localhost/SimTime")); ISimTime pipeProxy = pipeFactory.CreateChannel(); while (true) { string str = Console.ReadLine(); if (str.ToLower().Contains("get")) Console.WriteLine(pipeProxy.GetTime().ToString()); else if (str.ToLower().Contains("exit")) break; }

    Read the article

  • In App Purchase Unique Identifying Data

    - by dageshi
    O.K so I'm writing a iPhone travel guide, you purchase a subscription to a travel guide for 3 months, it downloads a fairly hefty database and for 3 months that database gets updated weekly with new stuff. Now what I'd like to do is make the user enter their email address as a one off action before they purchase their first guide, for China say. The purpose for doing this is 1) To allow me to contact the user by email when they add a note/tip for a particular place (the app will allow them to send notes & information to me) 2) To Uniquely identify who has purchased the subscription so that if they wipe their device and reinstall the app they can plug the email address in and pickup their subscriptions again. Or so they can use the same subscription on another device they own. My concerns are 1) Will Apple allow the email method of restoring functionality to a second or restored device? 2) As long as I tell the user what I'm using their email address for (aka I won't sell it to anyone else and use it for X purposes) will it be o.k to ask for said email address? And as a side note, can I tack the devices unique id onto my server comms to track devices or is apple going to through a hissy fit about that as well?

    Read the article

  • adding a token onto a webservice or wcf call

    - by duncanUK
    I have an httphandler which I am using to log the http soap request and response for each webservice that is called from my application as a comms log. i would like to inject a token ont he 1st call (possibly the 1st call to invoke the service that is being logged) and then be able to track all subsequent webservice calls run in the same context with this token so i can tie the subsequent calls back up to the original call. so for example. main webservice -> 2nd web service -> another web service [token] [token] [token] -> nth web service [token] I would like to inject the token on the first call to the main webservice (http handler checks if no token, add it), I would like to use the same http handler to intercept each call to the subsequent webservices and pass on the token if it exists already (the job of the httphandler is to log the in/out soap with the token to reference with. I have managed to inject the first token, but my problem is how do I add the token on the subsequent calls.. can I make it stick on the same context or session? My worry is that when we call a new webservice, we create a whole new proxy/http request which will not inhrit the token... or will it?! Ideally I would like it to persist on the http header as I am setting the token as a header at the moment? has anyone got any ideas or a better way of doing this? I would be most greatful for you comments!

    Read the article

  • C#: Need one of my classes to trigger an event in another class to update a text box

    - by Matt
    Total n00b to C# and events although I have been programming for a while. I have a class containing a text box. This class creates an instance of a communication manager class that is receiving frames from the Serial Port. I have this all working fine. Every time a frame is received and its data extracted, I want a method to run in my class with the text box in order to append this frame data to the text box. So, without posting all of my code I have my form class... public partial class Form1 : Form { CommManager comm; public Form1() { InitializeComponent(); comm = new CommManager(); } private void updateTextBox() { //get new values and update textbox } . . . and I have my CommManager class class CommManager { //here we manage the comms, recieve the data and parse the frame } SO... essentially, when I parse that frame, I need the updateTextBox method from the form class to run. I'm guessing this is possible with events but I can't seem to get it to work. I tried adding an event handler in the form class after creating the instance of CommManager as below... comm = new CommManager(); comm.framePopulated += new EventHandler(updateTextBox); ...but I must be doing this wrong as the compiler doesn't like it... Any ideas?!

    Read the article

  • Sync video play over network

    - by Nemesis
    Hi, I have made a media player that plays basically anything that's scheduled to it via a text file. The player can also play the exact same clip on multiple machines(PC's). The problem is the syncing. The same video starts playing on each of the machines, but they are out by about 400ms, which looks crap and if there's sound it's even worse. What I do at the moment is: One machine is set up as the master and all other machines are set up as slaves. The master decides what item will be played. It waits for a message from each of the slaves, once all slaves are connected (or after the timeout), it broadcasts the item id of the file that needs to be played. All machines then start playing that file. What I also tried: I thought that the file loading time might be the major driving factor in the sync mismatch, so I chankged the code to do the following. The master still decides what file to play. It waits for the connect message from each slave (or timeout) and transmits the item id of the file to play. All machines start playing that file but pauses it immediately. The master then again waits for a ready message from each of the slaves. As soon as all slaves responded the master sends a play message to all slaves. All machines then continue the file. This unfortunately did not improve the problem. I am now pretty sure the sync mismatch is due to network delay. How can I compensate for this? Or maybe determine the delay to each slave? All network comms are done with winsock. Any thoughts or ideas is much appreciated.

    Read the article

  • How to know the source of certain TCP traffic on AIX

    - by A.Rashad
    We have two AIX boxes, one for production system and another for testing. both systems are running ATM machine switches, where the ATM device is connected via TCP socket. we had an issue on production system where the machine would power off or get disconnected but the netstat -na | grep <IP of machine > would still mention that the socket is up when simulated that case on the UAT environment, the problem did not happen, where the socket would terminate in 3 to 5 minutes. when sniffed on the traffic between the machine and ATM we found that no traffic takes place on production while there is some sort of heartbeat on UAT. but it is not initiated by the application. $>tcpdump | grep -v "10.2.2.71" | grep -v "HSRP" | grep "10.3.1.30" tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on en6, link-type 1, capture size 96 bytes 09:08:13.323421 IP server073.afs3-callback > 10.3.1.30.impera: . 278204201:278204202(1) ack 3307884029 win 164 09:08:13.335334 IP 10.3.1.30.impera > server073.afs3-callback: . ack 1 win 64180 09:08:23.425771 IP 10.3.1.30.impera > server073.afs3-callback: . 1:2(1) ack 1 win 64180 09:08:23.425789 IP server073.afs3-callback > 10.3.1.30.impera: . ack 2 win 65535 09:09:13.628985 IP server073.afs3-callback > 10.3.1.30.impera: . 0:1(1) ack 1 win 164 09:09:13.633900 IP 10.3.1.30.impera > server073.afs3-callback: . ack 1 win 64180 09:09:23.373634 IP 10.3.1.30.impera > server073.afs3-callback: . 1:2(1) ack 1 win 64180 09:09:23.373647 IP server073.afs3-callback > 10.3.1.30.impera: . ack 2 win 65535 while on production, that traffic is not there. we want to know where this traffic is initiated from to implement on production to sense disconnection our comms parameters are: tcp_keepcnt = 2 tcp_keepidle = 100 tcp_keepinit = 150 tcp_keepintvl = 150 tcp_finwait2 = 1200 can anyone help? Editing Question: One point I missed because I was rushing to a meeting. the difference between the Production and UAT in setup is that in Production we have an application called F5 working as load balancer between the ATMs and the AIX box, while it is a direct connection through MPLS in case of UAT. note: we had one MPLS and one GPRS connected ATMs on UAT, and both connections terminated when unplugged in about 4 minutes Edit 2 the no -o tcp_timewait command returns 1 in both Production and UAT

    Read the article

  • How to know the source of certain TCP traffic on AIX

    - by A.Rashad
    We have two AIX boxes, one for production system and another for testing. both systems are running ATM machine switches, where the ATM device is connected via TCP socket. we had an issue on production system where the machine would power off or get disconnected but the netstat -na | grep <IP of machine > would still mention that the socket is up when simulated that case on the UAT environment, the problem did not happen, where the socket would terminate in 3 to 5 minutes. when sniffed on the traffic between the machine and ATM we found that no traffic takes place on production while there is some sort of heartbeat on UAT. but it is not initiated by the application. $>tcpdump | grep -v "10.2.2.71" | grep -v "HSRP" | grep "10.3.1.30" tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on en6, link-type 1, capture size 96 bytes 09:08:13.323421 IP server073.afs3-callback > 10.3.1.30.impera: . 278204201:278204202(1) ack 3307884029 win 164 09:08:13.335334 IP 10.3.1.30.impera > server073.afs3-callback: . ack 1 win 64180 09:08:23.425771 IP 10.3.1.30.impera > server073.afs3-callback: . 1:2(1) ack 1 win 64180 09:08:23.425789 IP server073.afs3-callback > 10.3.1.30.impera: . ack 2 win 65535 09:09:13.628985 IP server073.afs3-callback > 10.3.1.30.impera: . 0:1(1) ack 1 win 164 09:09:13.633900 IP 10.3.1.30.impera > server073.afs3-callback: . ack 1 win 64180 09:09:23.373634 IP 10.3.1.30.impera > server073.afs3-callback: . 1:2(1) ack 1 win 64180 09:09:23.373647 IP server073.afs3-callback > 10.3.1.30.impera: . ack 2 win 65535 while on production, that traffic is not there. we want to know where this traffic is initiated from to implement on production to sense disconnection our comms parameters are: tcp_keepcnt = 2 tcp_keepidle = 100 tcp_keepinit = 150 tcp_keepintvl = 150 tcp_finwait2 = 1200 can anyone help?

    Read the article

  • SQLAuthority News – Why VoIP Service Providers Should Think About NuoDB’s Geo Distribution

    - by Pinal Dave
    You can always tell when someone’s showing off their cool, cutting edge comms technology. They tend to raise their voice a lot. Back in the day they’d announce their gadget leadership to the rest of the herd by shouting into their cellphone. Usually the message was no more urgent than “Hi, I’m on my cellphone!” Now the same types will loudly name-drop a different technology to the rest of the airport lounge. “I’m leveraging the wifi,” a fellow passenger bellowed, the other day, as we filtered through the departure gate. Nobody needed to know that, but the subtext was “look at me everybody”. You can tell the really advanced mobile user – they tend to whisper. Their handset has a microphone (how cool is that!) and they know how to use it. Sometimes these shouty public broadcasters aren’t even connected anyway because the database for their Voice over IP (VoIP) platform can’t cope. This will happen if they are using a traditional SQL model to try and cope with a phone network which has far flung offices and hundreds of mobile employees. That, like shouting into your phone, is just wrong on so many levels. What VoIP needs now is a single, logical database across multiple servers in different geographies. It needs to be updated in real-time and automatically scaled out during times of peak demand. A VoIP system should scale up to handle increased traffic, but just as importantly is must then go back down in the off peak hours. Try this with a MySQL database. It can’t scale easily enough, so it will keep your developers busy. They’ll have spent many hours trying to knit the different databases together. Traditional relational databases can possibly achieve this, at a price. Mind you, you could extend baked bean cans and string to every point on the network and that would be no less elegant. That’s not really following engineering principles though is it? Having said that, most telcos and VoIP systems use a separate, independent solution for each office location, which they link together – loosely.  The more office locations, the more complex and expensive the solution becomes and so the more you spend on maintenance. Ideally, you’d have a fluid system that can automatically shift its shape as the need arises. That’s the point of software isn’t it – it adapts. Otherwise, we might as well return to the old days. A MySQL system isn’t exactly baked bean cans attached by string, but it’s closer in spirit to the old many teethed mechanical beast that was employed in the first type of automated switchboard. NuoBD’s NewSQL is designed to be a single database that works across multiple servers, which can scale easily, and scale on demand. That’s one system that gives high connectivity but no latency, complexity or maintenance issues. MySQL works in some circumstances, but a period of growth isn’t one of them. So as a company moves forward, the MySQL database can’t keep pace. Data storage and data replication errors creep in. Soon the diaspora of offices becomes a problem. Your telephone system isn’t just distributed, it is literally all over the place. Though voice calls are often a software function, some of the old habits of telephony remain. When you call an engineer out, some of them will listen to what you’re asking for and announce that it cannot be done. This is what happens if you ask, say, database engineers familiar with Oracle or Microsoft to fulfill your wish for a low maintenance system built on a single, fluid, scalable database. No can do, they’d say. In fact, I heard one shouting something similar into his VoIP handset at the airport. “I can’t get on the network, Mac. I’m on MySQL.” You can download NuoDB from here. “NuoDB provides the ability to replicate data globally in real-time, which is not available with any other product offering,” states Weeks.  “That alone is remarkable and it works. I’ve seen it. I’ve used it.  I’ve tested it. The ability to deploy NuoDB removes a tremendous burden from our support and engineering teams.” Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: NuoDB

    Read the article

  • I need help converting a C# string from one character encoding to another?

    - by Handleman
    According to Spolsky I can't call myself a developer, so there is a lot of shame behind this question... Scenario: From a C# application, I would like to take a string value from a SQL db and use it as the name of a directory. I have a secure (SSL) FTP server on which I want to set the current directory using the string value from the DB. Problem: Everything is working fine until I hit a string value with a "special" character - I seem unable to encode the directory name correctly to satisfy the FTP server. The code example below uses "special" character é as an example uses WinSCP as an external application for the ftps comms does not show all the code required to setup the Process "_winscp". sends commands to the WinSCP exe by writing to the process standardinput for simplicity, does not get the info from the DB, but instead simply declares a string (but I did do a .Equals to confirm that the value from the DB is the same as the declared string) makes three attempts to set the current directory on the FTP server using different string encodings - all of which fail makes an attempt to set the directory using a string that was created from a hand-crafted byte array - which works Process _winscp = new Process(); byte[] buffer; string nameFromString = "Sinéad O'Connor"; _winscp.StandardInput.WriteLine("cd \"" + nameFromString + "\""); buffer = Encoding.UTF8.GetBytes(nameFromString); _winscp.StandardInput.WriteLine("cd \"" + Encoding.UTF8.GetString(buffer) + "\""); buffer = Encoding.ASCII.GetBytes(nameFromString); _winscp.StandardInput.WriteLine("cd \"" + Encoding.ASCII.GetString(buffer) + "\""); byte[] nameFromBytes = new byte[] { 83, 105, 110, 130, 97, 100, 32, 79, 39, 67, 111, 110, 110, 111, 114 }; _winscp.StandardInput.WriteLine("cd \"" + Encoding.Default.GetString(nameFromBytes) + "\""); The UTF8 encoding changes é to 101 (decimal) but the FTP server doesn't like it. The ASCII encoding changes é to 63 (decimal) but the FTP server doesn't like it. When I represent é as value 130 (decimal) the FTP server is happy, except I can't find a method that will do this for me (I had to manually contruct the string from explicit bytes). Anyone know what I should do to my string to encode the é as 130 and make the FTP server happy and finally elevate me to level 1 developer by explaining the only single thing a developer should understand?

    Read the article

  • Looking for best practise for writing a serial device communication app in C#

    - by cdotlister
    I am pretty new to serial comms, but would like advise on how to best achieve a robust application which speak to and listens to a serial device. I have managed to make use of System.IO.serialport, and successfully connected to, sent data to and recieved from my device. The way things work is this. My application connects to the Com Port and opens the port.... I then connect my device to the com port, and it detects a connectio to the PC, so sends a bit of text. it's really just copyright info, as well as the version of the firmware. I don't do anything with that, except display it in my 'activity' window. The device then waits. I can then query information, but sending a command such as 'QUERY PARAMETER1'. It then replies with something like: 'QUERY PARAMETER1\r\n\r\n76767\r\n\r\n' I then process that. I can then update it by sending 'SET PARAMETER1 12345', and it will reply with 'QUERY PARAMETER1\r\n\r\n12345\r\n\r\n'. All pretty basic. So, what I have done is created a Communication Class. this call is called in it's own thread, and sends data back to the main form... and also allows me to send messages to it. Sending data is easy. Recieving is a bit more tricky. I have employed the use of the datarecieved event, and when ever data comes in, I echo that to my screen. My problem is this: When I send a command, I feel I am being very dodgy in my handling. What I am doing is, lets say I am sending 'QUERY PARAMETER1'. I send the command to the device, I then put 'PARAMETER1' into a global variable, and I do a Thread.Sleep(100). On the data recieved, I then have a bit of logic that checks the incoming data, and sees if the string CONTAINS the value in the gloabl variable. As the reply may be 'QUERY PARAMETER1\r\n\r\n76767\r\n\r\n', it sees that it contains my parameter, parses the string, and returns the value I am looking for, but placing it into another global variable. My sending method was sleeping for 100ms. It then wakes, and checks the returned global variable. If it has data... then I'm happy, and I process the data. Problem is... if the sleep is too short.. it will fail. And I feel it's flakey.. putting stuff into variables.. then waiting... The other option is to use ReadLine instead, but that's very blocking. So I remove the datarecieved method, and instead... just send the data... then call ReadLine(). That may give me better results. There's no time, except when we connect initially, that data comes from the device, without me requesting it. So, maybe readline will be simpler and safer? Is this known as 'Blocking' reads? Also, can I set a timeout? Hopefully someone can guide me.

    Read the article

  • Looking for best practise for writing a serial device communication app

    - by cdotlister
    I am pretty new to serial comms, but would like advise on how to best achieve a robust application which speak to and listens to a serial device. I have managed to make use of System.IO.SerialPort, and successfully connected to, sent data to and recieved from my device. The way things work is this. My application connects to the Com Port and opens the port.... I then connect my device to the com port, and it detects a connection to the PC, so sends a bit of text. it's really just copyright info, as well as the version of the firmware. I don't do anything with that, except display it in my 'activity' window. The device then waits. I can then query information, but sending a command such as 'QUERY PARAMETER1'. It then replies with something like: 'QUERY PARAMETER1\r\n\r\n76767\r\n\r\n' I then process that. I can then update it by sending 'SET PARAMETER1 12345', and it will reply with 'QUERY PARAMETER1\r\n\r\n12345\r\n\r\n'. All pretty basic. So, what I have done is created a Communication Class. this call is called in it's own thread, and sends data back to the main form... and also allows me to send messages to it. Sending data is easy. Recieving is a bit more tricky. I have employed the use of the datarecieved event, and when ever data comes in, I echo that to my screen. My problem is this: When I send a command, I feel I am being very dodgy in my handling. What I am doing is, lets say I am sending 'QUERY PARAMETER1'. I send the command to the device, I then put 'PARAMETER1' into a global variable, and I do a Thread.Sleep(100). On the data received, I then have a bit of logic that checks the incoming data, and sees if the string CONTAINS the value in the global variable. As the reply may be 'QUERY PARAMETER1\r\n\r\n76767\r\n\r\n', it sees that it contains my parameter, parses the string, and returns the value I am looking for, but placing it into another global variable. My sending method was sleeping for 100ms. It then wakes, and checks the returned global variable. If it has data... then I'm happy, and I process the data. Problem is... if the sleep is too short.. it will fail. And I feel it's flaky.. putting stuff into variables.. then waiting... The other option is to use ReadLine instead, but that's very blocking. So I remove the data received method, and instead... just send the data... then call ReadLine(). That may give me better results. There's no time, except when we connect initially, that data comes from the device, without me requesting it. So, maybe ReadLine will be simpler and safer? Is this known as 'Blocking' reads? Also, can I set a timeout? Hopefully someone can guide me.

    Read the article

  • Remote EJB lookup issue with WebSphere 6.1

    - by marc dauncey
    I've seen this question asked before, but I've tried various solutions proposed, to no avail. Essentially, I have two EJB enterprise applications, that need to communicate with one another. The first is a web application, the second is a search server - they are located on different development servers, not in the same node, cell, or JVM, although they are on the same physical box. I'm doing the JNDI lookup via IIOP, and the URL I am using is as follows: iiop://searchserver:2819 In my hosts file, I've set searchserver to 127.0.0.1. The ports for my search server are bound to this hostname too. However, when the web app (that uses Spring btw) attempts to lookup the search EJB, it fails with the following error. This is driving me nuts, surely this kind of comms between the servers should be fairly simple to get working. I've checked the ports and they are correct. I note that the exception says the initial context is H00723Node03Cell/nodes/H00723Node03/servers/server1, name: ejb/com/hmv/dataaccess/ejb/hmvsearch/HMVSearchHome. This is the web apps server NOT the search server. Is this correct? How can I get Spring to use the right context? [08/06/10 17:14:28:655 BST] 00000028 SystemErr R org.springframework.remoting.RemoteLookupFailureException: Failed to locate remote EJB [ejb/com/hmv/dataaccess/ejb/hmvsearch/HMVSearchHome]; nested exception is javax.naming.NameNotFoundException: Context: H00723Node03Cell/nodes/H00723Node03/servers/server1, name: ejb/com/hmv/dataaccess/ejb/hmvsearch/HMVSearchHome: First component in name hmvsearch/HMVSearchHome not found. [Root exception is org.omg.CosNaming.NamingContextPackage.NotFound: IDL:omg.org/CosNaming/NamingContext/NotFound:1.0] at org.springframework.ejb.access.SimpleRemoteSlsbInvokerInterceptor.doInvoke(SimpleRemoteSlsbInvokerInterceptor.java:101) at org.springframework.ejb.access.AbstractRemoteSlsbInvokerInterceptor.invoke(AbstractRemoteSlsbInvokerInterceptor.java:140) at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204) at $Proxy7.doSearchByProductKeywordsForKiosk(Unknown Source) at com.hmv.web.usecases.search.SearchUC.execute(SearchUC.java:128) at com.hmv.web.actions.search.SearchAction.executeAction(SearchAction.java:129) at com.hmv.web.actions.search.KioskSearchAction.executeAction(KioskSearchAction.java:37) at com.hmv.web.actions.HMVAbstractAction.execute(HMVAbstractAction.java:123) at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484) at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274) at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482) at com.hmv.web.controller.HMVActionServlet.process(HMVActionServlet.java:149) at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507) at javax.servlet.http.HttpServlet.service(HttpServlet.java:743) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1282) at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1239) at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:136) at com.hmv.web.support.SessionFilter.doFilter(SessionFilter.java:137) at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:142) at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:121) at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:82) at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:670) at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:2933) at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:221) at com.ibm.ws.webcontainer.VirtualHost.handleRequest(VirtualHost.java:210) at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:1912) at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:84) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:472) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:411) at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:101) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:566) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:619) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:952) at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java:1039) at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1462) Caused by: javax.naming.NameNotFoundException: Context: H00723Node03Cell/nodes/H00723Node03/servers/server1, name: ejb/com/hmv/dataaccess/ejb/hmvsearch/HMVSearchHome: First component in name hmvsearch/HMVSearchHome not found. [Root exception is org.omg.CosNaming.NamingContextPackage.NotFound: IDL:omg.org/CosNaming/NamingContext/NotFound:1.0] at com.ibm.ws.naming.jndicos.CNContextImpl.processNotFoundException(CNContextImpl.java:4392) at com.ibm.ws.naming.jndicos.CNContextImpl.doLookup(CNContextImpl.java:1752) at com.ibm.ws.naming.jndicos.CNContextImpl.doLookup(CNContextImpl.java:1707) at com.ibm.ws.naming.jndicos.CNContextImpl.lookupExt(CNContextImpl.java:1412) at com.ibm.ws.naming.jndicos.CNContextImpl.lookup(CNContextImpl.java:1290) at com.ibm.ws.naming.util.WsnInitCtx.lookup(WsnInitCtx.java:145) at javax.naming.InitialContext.lookup(InitialContext.java:361) at org.springframework.jndi.JndiTemplate$1.doInContext(JndiTemplate.java:132) at org.springframework.jndi.JndiTemplate.execute(JndiTemplate.java:88) at org.springframework.jndi.JndiTemplate.lookup(JndiTemplate.java:130) at org.springframework.jndi.JndiTemplate.lookup(JndiTemplate.java:155) at org.springframework.jndi.JndiLocatorSupport.lookup(JndiLocatorSupport.java:95) at org.springframework.jndi.JndiObjectLocator.lookup(JndiObjectLocator.java:105) at org.springframework.ejb.access.AbstractRemoteSlsbInvokerInterceptor.lookup(AbstractRemoteSlsbInvokerInterceptor.java:98) at org.springframework.ejb.access.AbstractSlsbInvokerInterceptor.getHome(AbstractSlsbInvokerInterceptor.java:143) at org.springframework.ejb.access.AbstractSlsbInvokerInterceptor.create(AbstractSlsbInvokerInterceptor.java:172) at org.springframework.ejb.access.AbstractRemoteSlsbInvokerInterceptor.newSessionBeanInstance(AbstractRemoteSlsbInvokerInterceptor.java:226) at org.springframework.ejb.access.SimpleRemoteSlsbInvokerInterceptor.getSessionBeanInstance(SimpleRemoteSlsbInvokerInterceptor.java:141) at org.springframework.ejb.access.SimpleRemoteSlsbInvokerInterceptor.doInvoke(SimpleRemoteSlsbInvokerInterceptor.java:97) ... 36 more Many thanks for any assistance! Marc

    Read the article

  • Trying to configure HWIC-3G-HSPA

    - by user1174838
    I'm trying to configure a couple of Cisco 1941 routes. The are both identical routers. Each as a HWIC-1T (Smart Serial interface) and a HWIC-3G-HSPA 3G interface. These routers are to be sent to remote sites. We have connectivity to one of the sites but if remote site A gors down we lose connectivity to remote site B. The HWIC-1T is the primary WAN interface using frame relay joining the two remote sites We want the HWIC-3G-HSPA to be usable for direct connectivity from head office to remote site B, and also the HWIC-3G-HSPA is do be used for comms between the remote sites when the frame relay is down (happens quite a bit). I initialy tried to do dynamic routing using EIGRP however in my lab setup of laptop - 1941 - 1941 - laptop, I was unable to get end to end connectivity. I later settled on static routing and have got end to end connectivity but only over frame relay, not the HWIC-3G-HSPA. The sanitized running config for remote site A: version 15.1 service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption service udp-small-servers service tcp-small-servers ! hostname remoteA ! boot-start-marker boot-end-marker ! ! logging buffered 51200 warnings enable secret 5 censored ! no aaa new-model clock timezone wst 8 0 ! no ipv6 cef ip source-route ip cef ! ip domain name yourdomain.com multilink bundle-name authenticated ! chat-script gsm "" "ATDT*98*1#" TIMEOUT 30 "CONNECT" ! username admin privilege 15 secret 5 censored ! controller Cellular 0/1 ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.2.5 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0 ip address 10.1.1.2 255.255.255.252 encapsulation frame-relay cdp enable frame-relay interface-dlci 16 frame-relay lmi-type ansi ! interface Cellular0/1/0 ip address negotiated encapsulation ppp dialer in-band dialer idle-timeout 2147483 dialer string gsm dialer-group 1 async mode interactive ppp chap hostname censored ppp chap password 7 censored cdp enable ! interface Cellular0/1/1 no ip address encapsulation ppp ! interface Dialer0 no ip address ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip route 0.0.0.0 0.0.0.0 Serial0/0/0 210 permanent ip route 0.0.0.0 0.0.0.0 Cellular0/1/0 220 permanent ip route 172.31.2.0 255.255.255.0 Cellular0/1/0 permanent ip route 192.168.3.0 255.255.255.0 10.1.1.1 permanent ip route 192.168.3.0 255.255.255.0 Cellular0/1/0 210 permanent ! access-list 1 permit any dialer-list 1 protocol ip list 1 ! control-plane ! line con 0 logging synchronous login local line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line 0/1/0 exec-timeout 0 0 script dialer gsm login modem InOut no exec transport input all rxspeed 7200000 txspeed 5760000 line 0/1/1 no exec rxspeed 7200000 txspeed 5760000 line vty 0 4 access-class 23 in privilege level 15 password 7 censored login local transport input all line vty 5 15 access-class 23 in privilege level 15 password 7 censored login local transport input all line vty 16 1370 password 7 censored login transport input all ! scheduler allocate 20000 1000 end The sanitized running config for remote site B: version 15.1 service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption service udp-small-servers service tcp-small-servers ! hostname remoteB ! boot-start-marker boot-end-marker ! logging buffered 51200 warnings enable secret 5 censored ! no aaa new-model clock timezone wst 8 0 ! no ipv6 cef ip source-route ip cef ! no ip domain lookup ip domain name yourdomain.com multilink bundle-name authenticated ! chat-script gsm "" "ATDT*98*1#" TIMEOUT 30 "CONNECT" username admin privilege 15 secret 5 censored ! controller Cellular 0/1 ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.3.1 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0 ip address 10.1.1.1 255.255.255.252 encapsulation frame-relay clock rate 2000000 cdp enable frame-relay interface-dlci 16 frame-relay lmi-type ansi frame-relay intf-type dce ! interface Cellular0/1/0 ip address negotiated encapsulation ppp dialer in-band dialer idle-timeout 2147483 dialer string gsm dialer-group 1 async mode interactive ppp chap hostname censored ppp chap password 7 censored ppp ipcp dns request cdp enable ! interface Cellular0/1/1 no ip address encapsulation ppp ! interface Dialer0 no ip address ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip route 0.0.0.0 0.0.0.0 Serial0/0/0 210 permanent ip route 0.0.0.0 0.0.0.0 Cellular0/1/0 220 permanent ip route 172.31.2.0 255.255.255.0 Cellular0/1/0 permanent ip route 192.168.2.0 255.255.255.0 10.1.1.2 permanent ip route 192.168.2.0 255.255.255.0 Cellular0/1/0 210 permanent ! kron occurrence PING in 1 recurring policy-list ICMP ! access-list 1 permit any dialer-list 1 protocol ip list 1 ! control-plane ! line con 0 logging synchronous login local line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line 0/1/0 exec-timeout 0 0 script dialer gsm login modem InOut no exec transport input all rxspeed 7200000 txspeed 5760000 line 0/1/1 no exec rxspeed 7200000 txspeed 5760000 line vty 0 4 access-class 23 in privilege level 15 password 7 censored login transport input all line vty 5 15 access-class 23 in privilege level 15 password 7 censored login transport input all line vty 16 1370 password 7 censored login transport input all ! scheduler allocate 20000 1000 end The last problem I'm having is the 3G interfaces go down after only a few minutes of inactivity. I've tried using kron to ping the local HWIC-3G-HSPA interface (cellular 0/1/0) every minute but that hasn't been successful. Manually pinging the IP assigned (by the telco) to ce0/1/0 does bring the interface up. Any ideas? Thanks

    Read the article

  • ASA hairpining: I basicaly want to allow 2 spokes to be able to communicate with each other.

    - by Thirst4Knowledge
    ASA Spoke to Spoke Communication I have been looking at spke to spoke comms or "hairpining" for months and have posted on numerouse forums but to no avail. I have a Hub and spoke network where the HUB is an ASA Firewall version 8.2 * I basicaly want to allow 2 spokes to be able to communicate with each other. I think that I have got the concept of the ASA Config for example: same-security-traffic permit intra-interface access-list HQ-LAN extended permit ip ASA-LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list HQ-LAN extended permit ip 192.168.99.0 255.255.255.0 HQ-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list no-nat extended permit ip HQ-LAN 255.255.255.0 192.168.99.0 255.255.255.0 access-list no-nat extended permit ip 192.168.99.0 255.255.255.0 HQ-LAN 255.255.255.0 I think my problem may be that the other spokes are not CIsco Firewalls and I need to work out how to do the alternative setups. I want to at least make sure that my firewall etup is correct then I can move onto the other spokes here is my config: Hostname ASA domain-name mydomain.com names ! interface Ethernet0/0 speed 100 duplex full nameif outside security-level 0 ip address 1.1.1.246 255.255.255.224 ! interface Ethernet0/1 speed 100 duplex full nameif inside security-level 100 ip address 192.168.240.33 255.255.255.224 ! interface Ethernet0/2 description DMZ VLAN-253 speed 100 duplex full nameif DMZ security-level 50 ip address 192.168.254.1 255.255.255.0 ! interface Ethernet0/3 no nameif no security-level no ip address ! boot system disk0:/asa821-k8.bin ftp mode passive clock timezone GMT/BST 0 dns server-group DefaultDNS domain-name mydomain.com same-security-traffic permit inter-interface same-security-traffic permit intra-interface object-group network ASA_LAN_Plus_HQ_LAN network-object ASA_LAN 255.255.248.0 network-object HQ-LAN 255.255.255.0 access-list outside_acl remark Exchange web access-list outside_acl extended permit tcp any host MS-Exchange_server-NAT eq https access-list outside_acl remark PPTP Encapsulation access-list outside_acl extended permit gre any host MS-ISA-Server-NAT access-list outside_acl remark PPTP access-list outside_acl extended permit tcp any host MS-ISA-Server-NAT eq pptp access-list outside_acl remark Intra Http access-list outside_acl extended permit tcp any host MS-ISA-Server-NAT eq www access-list outside_acl remark Intra Https access-list outside_acl extended permit tcp any host MS-ISA-Server-NAT eq https access-list outside_acl remark SSL Server-Https 443 access-list outside_acl remark Https 8443(Open VPN Custom port for SSLVPN client downlaod) access-list outside_acl remark FTP 20 access-list outside_acl remark Http access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT object-group DM_INLINE_TCP_1 access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT eq 8443 access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT eq www access-list outside_acl remark For secure remote Managment-SSH access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT eq ssh access-list outside_acl extended permit ip Genimage_Anyconnect 255.255.255.0 ASA_LAN 255.255.248.0 access-list ASP-Live remark Live ASP access-list ASP-Live extended permit ip ASA_LAN 255.255.248.0 192.168.60.0 255.255.255.0 access-list Bo remark Bo access-list Bo extended permit ip ASA_LAN 255.255.248.0 192.168.169.0 255.255.255.0 access-list Bill remark Bill access-list Bill extended permit ip ASA_LAN 255.255.248.0 Bill.15 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 Bill.5 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.149.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.160.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.165.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.144.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.140.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.152.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.153.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.163.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.157.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.167.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.156.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 North-Office-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.161.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.143.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.137.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.159.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.169.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.150.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.162.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.166.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.168.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.174.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.127.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.173.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.175.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.176.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.100.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.99.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 10.10.10.0 255.255.255.0 access-list no-nat extended permit ip host 192.168.240.34 Cisco-admin-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 Genimage_Anyconnect 255.255.255.0 access-list no-nat extended permit ip host Tunnel-DC host HQ-SDSL-Peer access-list no-nat extended permit ip HQ-LAN 255.255.255.0 North-Office-LAN 255.255.255.0 access-list no-nat extended permit ip North-Office-LAN 255.255.255.0 HQ-LAN 255.255.255.0 access-list Car remark Car access-list Car extended permit ip ASA_LAN 255.255.248.0 192.168.165.0 255.255.255.0 access-list Che remark Che access-list Che extended permit ip ASA_LAN 255.255.248.0 192.168.144.0 255.255.255.0 access-list Chi remark Chi access-list Chi extended permit ip ASA_LAN 255.255.248.0 192.168.140.0 255.255.255.0 access-list Cla remark Cla access-list Cla extended permit ip ASA_LAN 255.255.248.0 192.168.152.0 255.255.255.0 access-list Eas remark Eas access-list Eas extended permit ip ASA_LAN 255.255.248.0 192.168.149.0 255.255.255.0 access-list Ess remark Ess access-list Ess extended permit ip ASA_LAN 255.255.248.0 192.168.153.0 255.255.255.0 access-list Gat remark Gat access-list Gat extended permit ip ASA_LAN 255.255.248.0 192.168.163.0 255.255.255.0 access-list Hud remark Hud access-list Hud extended permit ip ASA_LAN 255.255.248.0 192.168.157.0 255.255.255.0 access-list Ilk remark Ilk access-list Ilk extended permit ip ASA_LAN 255.255.248.0 192.168.167.0 255.255.255.0 access-list Ken remark Ken access-list Ken extended permit ip ASA_LAN 255.255.248.0 192.168.156.0 255.255.255.0 access-list North-Office remark North-Office access-list North-Office extended permit ip ASA_LAN 255.255.248.0 North-Office-LAN 255.255.255.0 access-list inside_acl remark Inside_ad access-list inside_acl extended permit ip any any access-list Old_HQ remark Old_HQ access-list Old_HQ extended permit ip ASA_LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list Old_HQ extended permit ip HQ-LAN 255.255.255.0 192.168.99.0 255.255.255.0 access-list She remark She access-list She extended permit ip ASA_LAN 255.255.248.0 192.168.150.0 255.255.255.0 access-list Lit remark Lit access-list Lit extended permit ip ASA_LAN 255.255.248.0 192.168.143.0 255.255.255.0 access-list Mid remark Mid access-list Mid extended permit ip ASA_LAN 255.255.248.0 192.168.137.0 255.255.255.0 access-list Spi remark Spi access-list Spi extended permit ip ASA_LAN 255.255.248.0 192.168.162.0 255.255.255.0 access-list Tor remark Tor access-list Tor extended permit ip ASA_LAN 255.255.248.0 192.168.166.0 255.255.255.0 access-list Tra remark Tra access-list Tra extended permit ip ASA_LAN 255.255.248.0 192.168.168.0 255.255.255.0 access-list Tru remark Tru access-list Tru extended permit ip ASA_LAN 255.255.248.0 192.168.174.0 255.255.255.0 access-list Yo remark Yo access-list Yo extended permit ip ASA_LAN 255.255.248.0 192.168.127.0 255.255.255.0 access-list Nor remark Nor access-list Nor extended permit ip ASA_LAN 255.255.248.0 192.168.159.0 255.255.255.0 access-list Nor extended permit ip ASA_LAN 255.255.248.0 192.168.173.0 255.255.255.0 inactive access-list ST remark ST access-list ST extended permit ip ASA_LAN 255.255.248.0 192.168.175.0 255.255.255.0 access-list Le remark Le access-list Le extended permit ip ASA_LAN 255.255.248.0 192.168.161.0 255.255.255.0 access-list DMZ-ACL remark DMZ access-list DMZ-ACL extended permit ip host OpenVPN-Srvr any access-list no-nat-dmz remark DMZ -No Nat access-list no-nat-dmz extended permit ip 192.168.250.0 255.255.255.0 HQ-LAN 255.255.255.0 access-list Split_Tunnel_List remark ASA-LAN access-list Split_Tunnel_List standard permit ASA_LAN 255.255.248.0 access-list Split_Tunnel_List standard permit Genimage_Anyconnect 255.255.255.0 access-list outside_cryptomap_30 remark Po access-list outside_cryptomap_30 extended permit ip ASA_LAN 255.255.248.0 Po 255.255.255.0 access-list outside_cryptomap_24 extended permit ip ASA_LAN 255.255.248.0 192.168.100.0 255.255.255.0 access-list outside_cryptomap_16 extended permit ip ASA_LAN 255.255.248.0 192.168.99.0 255.255.255.0 access-list outside_cryptomap_34 extended permit ip ASA_LAN 255.255.248.0 10.10.10.0 255.255.255.0 access-list outside_31_cryptomap extended permit ip host 192.168.240.34 Cisco-admin-LAN 255.255.255.0 access-list outside_32_cryptomap extended permit ip host Tunnel-DC host HQ-SDSL-Peer access-list Genimage_VPN_Any_connect_pix_client remark Genimage "Any Connect" VPN access-list Genimage_VPN_Any_connect_pix_client standard permit Genimage_Anyconnect 255.255.255.0 access-list Split-Tunnel-ACL standard permit ASA_LAN 255.255.248.0 access-list nonat extended permit ip HQ-LAN 255.255.255.0 192.168.99.0 255.255.255.0 pager lines 24 logging enable logging timestamp logging console notifications logging monitor notifications logging buffered warnings logging asdm informational no logging message 106015 no logging message 313001 no logging message 313008 no logging message 106023 no logging message 710003 no logging message 106100 no logging message 302015 no logging message 302014 no logging message 302013 no logging message 302018 no logging message 302017 no logging message 302016 no logging message 302021 no logging message 302020 flow-export destination inside MS-ISA-Server 2055 flow-export destination outside 192.168.130.126 2055 flow-export template timeout-rate 1 flow-export delay flow-create 15 mtu outside 1500 mtu inside 1500 mtu DMZ 1500 mtu management 1500 ip local pool RAS-VPN 10.0.0.1.1-10.0.0.1.254 mask 255.255.255.255 icmp unreachable rate-limit 1 burst-size 1 icmp permit any unreachable outside icmp permit any echo outside icmp permit any echo-reply outside icmp permit any outside icmp permit any echo inside icmp permit any echo-reply inside icmp permit any echo DMZ icmp permit any echo-reply DMZ asdm image disk0:/asdm-621.bin no asdm history enable arp timeout 14400 nat-control global (outside) 1 interface global (inside) 1 interface nat (inside) 0 access-list no-nat nat (inside) 1 0.0.0.0 0.0.0.0 nat (DMZ) 0 access-list no-nat-dmz static (inside,outside) MS-ISA-Server-NAT MS-ISA-Server netmask 255.255.255.255 static (DMZ,outside) OpenVPN-Srvr-NAT OpenVPN-Srvr netmask 255.255.255.255 static (inside,outside) MS-Exchange_server-NAT MS-Exchange_server netmask 255.255.255.255 access-group outside_acl in interface outside access-group inside_acl in interface inside access-group DMZ-ACL in interface DMZ route outside 0.0.0.0 0.0.0.0 1.1.1.225 1 route inside 10.10.10.0 255.255.255.0 192.168.240.34 1 route outside Genimage_Anyconnect 255.255.255.0 1.1.1.225 1 route inside Open-VPN 255.255.248.0 OpenVPN-Srvr 1 route inside HQledon-Voice-LAN 255.255.255.0 192.168.240.34 1 route outside Bill 255.255.255.0 1.1.1.225 1 route outside Yo 255.255.255.0 1.1.1.225 1 route inside 192.168.129.0 255.255.255.0 192.168.240.34 1 route outside HQ-LAN 255.255.255.0 1.1.1.225 1 route outside Mid 255.255.255.0 1.1.1.225 1 route outside 192.168.140.0 255.255.255.0 1.1.1.225 1 route outside 192.168.143.0 255.255.255.0 1.1.1.225 1 route outside 192.168.144.0 255.255.255.0 1.1.1.225 1 route outside 192.168.149.0 255.255.255.0 1.1.1.225 1 route outside 192.168.152.0 255.255.255.0 1.1.1.225 1 route outside 192.168.153.0 255.255.255.0 1.1.1.225 1 route outside North-Office-LAN 255.255.255.0 1.1.1.225 1 route outside 192.168.156.0 255.255.255.0 1.1.1.225 1 route outside 192.168.157.0 255.255.255.0 1.1.1.225 1 route outside 192.168.159.0 255.255.255.0 1.1.1.225 1 route outside 192.168.160.0 255.255.255.0 1.1.1.225 1 route outside 192.168.161.0 255.255.255.0 1.1.1.225 1 route outside 192.168.162.0 255.255.255.0 1.1.1.225 1 route outside 192.168.163.0 255.255.255.0 1.1.1.225 1 route outside 192.168.165.0 255.255.255.0 1.1.1.225 1 route outside 192.168.166.0 255.255.255.0 1.1.1.225 1 route outside 192.168.167.0 255.255.255.0 1.1.1.225 1 route outside 192.168.168.0 255.255.255.0 1.1.1.225 1 route outside 192.168.173.0 255.255.255.0 1.1.1.225 1 route outside 192.168.174.0 255.255.255.0 1.1.1.225 1 route outside 192.168.175.0 255.255.255.0 1.1.1.225 1 route outside 192.168.99.0 255.255.255.0 1.1.1.225 1 route inside ASA_LAN 255.255.255.0 192.168.240.34 1 route inside 192.168.124.0 255.255.255.0 192.168.240.34 1 route inside 192.168.50.0 255.255.255.0 192.168.240.34 1 route inside 192.168.51.0 255.255.255.128 192.168.240.34 1 route inside 192.168.240.0 255.255.255.224 192.168.240.34 1 route inside 192.168.240.164 255.255.255.224 192.168.240.34 1 route inside 192.168.240.196 255.255.255.224 192.168.240.34 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa-server vpn protocol radius max-failed-attempts 5 aaa-server vpn (inside) host 192.168.X.2 timeout 60 key a5a53r3t authentication-port 1812 radius-common-pw a5a53r3t aaa authentication ssh console LOCAL aaa authentication http console LOCAL http server enable http 0.0.0.0 0.0.0.0 inside http 1.1.1.2 255.255.255.255 outside http 1.1.1.234 255.255.255.255 outside http 0.0.0.0 0.0.0.0 management http 1.1.100.198 255.255.255.255 outside http 0.0.0.0 0.0.0.0 outside crypto map FW_Outside_map 1 match address Bill crypto map FW_Outside_map 1 set peer x.x.x.121 crypto map FW_Outside_map 1 set transform-set SECURE crypto map FW_Outside_map 2 match address Bo crypto map FW_Outside_map 2 set peer x.x.x.202 crypto map FW_Outside_map 2 set transform-set SECURE crypto map FW_Outside_map 3 match address ASP-Live crypto map FW_Outside_map 3 set peer x.x.x.113 crypto map FW_Outside_map 3 set transform-set SECURE crypto map FW_Outside_map 4 match address Car crypto map FW_Outside_map 4 set peer x.x.x.205 crypto map FW_Outside_map 4 set transform-set SECURE crypto map FW_Outside_map 5 match address Old_HQ crypto map FW_Outside_map 5 set peer x.x.x.2 crypto map FW_Outside_map 5 set transform-set SECURE WG crypto map FW_Outside_map 6 match address Che crypto map FW_Outside_map 6 set peer x.x.x.204 crypto map FW_Outside_map 6 set transform-set SECURE crypto map FW_Outside_map 7 match address Chi crypto map FW_Outside_map 7 set peer x.x.x.212 crypto map FW_Outside_map 7 set transform-set SECURE crypto map FW_Outside_map 8 match address Cla crypto map FW_Outside_map 8 set peer x.x.x.215 crypto map FW_Outside_map 8 set transform-set SECURE crypto map FW_Outside_map 9 match address Eas crypto map FW_Outside_map 9 set peer x.x.x.247 crypto map FW_Outside_map 9 set transform-set SECURE crypto map FW_Outside_map 10 match address Ess crypto map FW_Outside_map 10 set peer x.x.x.170 crypto map FW_Outside_map 10 set transform-set SECURE crypto map FW_Outside_map 11 match address Hud crypto map FW_Outside_map 11 set peer x.x.x.8 crypto map FW_Outside_map 11 set transform-set SECURE crypto map FW_Outside_map 12 match address Gat crypto map FW_Outside_map 12 set peer x.x.x.212 crypto map FW_Outside_map 12 set transform-set SECURE crypto map FW_Outside_map 13 match address Ken crypto map FW_Outside_map 13 set peer x.x.x.230 crypto map FW_Outside_map 13 set transform-set SECURE crypto map FW_Outside_map 14 match address She crypto map FW_Outside_map 14 set peer x.x.x.24 crypto map FW_Outside_map 14 set transform-set SECURE crypto map FW_Outside_map 15 match address North-Office crypto map FW_Outside_map 15 set peer x.x.x.94 crypto map FW_Outside_map 15 set transform-set SECURE crypto map FW_Outside_map 16 match address outside_cryptomap_16 crypto map FW_Outside_map 16 set peer x.x.x.134 crypto map FW_Outside_map 16 set transform-set SECURE crypto map FW_Outside_map 16 set security-association lifetime seconds crypto map FW_Outside_map 17 match address Lit crypto map FW_Outside_map 17 set peer x.x.x.110 crypto map FW_Outside_map 17 set transform-set SECURE crypto map FW_Outside_map 18 match address Mid crypto map FW_Outside_map 18 set peer 78.x.x.110 crypto map FW_Outside_map 18 set transform-set SECURE crypto map FW_Outside_map 19 match address Sp crypto map FW_Outside_map 19 set peer x.x.x.47 crypto map FW_Outside_map 19 set transform-set SECURE crypto map FW_Outside_map 20 match address Tor crypto map FW_Outside_map 20 set peer x.x.x.184 crypto map FW_Outside_map 20 set transform-set SECURE crypto map FW_Outside_map 21 match address Tr crypto map FW_Outside_map 21 set peer x.x.x.75 crypto map FW_Outside_map 21 set transform-set SECURE crypto map FW_Outside_map 22 match address Yo crypto map FW_Outside_map 22 set peer x.x.x.40 crypto map FW_Outside_map 22 set transform-set SECURE crypto map FW_Outside_map 23 match address Tra crypto map FW_Outside_map 23 set peer x.x.x.145 crypto map FW_Outside_map 23 set transform-set SECURE crypto map FW_Outside_map 24 match address outside_cryptomap_24 crypto map FW_Outside_map 24 set peer x.x.x.46 crypto map FW_Outside_map 24 set transform-set SECURE crypto map FW_Outside_map 24 set security-association lifetime seconds crypto map FW_Outside_map 25 match address Nor crypto map FW_Outside_map 25 set peer x.x.x.70 crypto map FW_Outside_map 25 set transform-set SECURE crypto map FW_Outside_map 26 match address Ilk crypto map FW_Outside_map 26 set peer x.x.x.65 crypto map FW_Outside_map 26 set transform-set SECURE crypto map FW_Outside_map 27 match address Nor crypto map FW_Outside_map 27 set peer x.x.x.240 crypto map FW_Outside_map 27 set transform-set SECURE crypto map FW_Outside_map 28 match address ST crypto map FW_Outside_map 28 set peer x.x.x.163 crypto map FW_Outside_map 28 set transform-set SECURE crypto map FW_Outside_map 28 set security-association lifetime seconds crypto map FW_Outside_map 28 set security-association lifetime kilobytes crypto map FW_Outside_map 29 match address Lei crypto map FW_Outside_map 29 set peer x.x.x.4 crypto map FW_Outside_map 29 set transform-set SECURE crypto map FW_Outside_map 30 match address outside_cryptomap_30 crypto map FW_Outside_map 30 set peer x.x.x.34 crypto map FW_Outside_map 30 set transform-set SECURE crypto map FW_Outside_map 31 match address outside_31_cryptomap crypto map FW_Outside_map 31 set pfs crypto map FW_Outside_map 31 set peer Cisco-admin-Peer crypto map FW_Outside_map 31 set transform-set ESP-AES-256-SHA crypto map FW_Outside_map 32 match address outside_32_cryptomap crypto map FW_Outside_map 32 set pfs crypto map FW_Outside_map 32 set peer HQ-SDSL-Peer crypto map FW_Outside_map 32 set transform-set ESP-AES-256-SHA crypto map FW_Outside_map 34 match address outside_cryptomap_34 crypto map FW_Outside_map 34 set peer x.x.x.246 crypto map FW_Outside_map 34 set transform-set ESP-AES-128-SHA ESP-AES-192-SHA ESP-AES-256-SHA crypto map FW_Outside_map 65535 ipsec-isakmp dynamic dynmap crypto map FW_Outside_map interface outside crypto map FW_outside_map 31 set peer x.x.x.45 crypto isakmp identity address crypto isakmp enable outside crypto isakmp policy 9 webvpn enable outside svc enable group-policy ASA-LAN-VPN internal group-policy ASA_LAN-VPN attributes wins-server value 192.168.x.1 192.168.x.2 dns-server value 192.168.x.1 192.168.x.2 vpn-tunnel-protocol IPSec svc split-tunnel-policy tunnelspecified split-tunnel-network-list value Split-Tunnel-ACL default-domain value MYdomain username xxxxxxxxxx password privilege 15 tunnel-group DefaultRAGroup ipsec-attributes isakmp keepalive threshold 30 retry 2 tunnel-group DefaultWEBVPNGroup ipsec-attributes isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.121 type ipsec-l2l tunnel-group x.x.x..121 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.202 type ipsec-l2l tunnel-group x.x.x.202 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.113 type ipsec-l2l tunnel-group x.x.x.113 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.205 type ipsec-l2l tunnel-group x.x.x.205 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.204 type ipsec-l2l tunnel-group x.x.x.204 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.212 type ipsec-l2l tunnel-group x.x.x.212 ipsec-attributes pre-shared-key * tunnel-group x.x.x.215 type ipsec-l2l tunnel-group x.x.x.215 ipsec-attributes pre-shared-key * tunnel-group x.x.x.247 type ipsec-l2l tunnel-group x.x.x.247 ipsec-attributes pre-shared-key * tunnel-group x.x.x.170 type ipsec-l2l tunnel-group x.x.x.170 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x..8 type ipsec-l2l tunnel-group x.x.x.8 ipsec-attributes pre-shared-key * tunnel-group x.x.x.212 type ipsec-l2l tunnel-group x.x.x.212 ipsec-attributes pre-shared-key * tunnel-group x.x.x.230 type ipsec-l2l tunnel-group x.x.x.230 ipsec-attributes pre-shared-key * tunnel-group x.x.x.24 type ipsec-l2l tunnel-group x.x.x.24 ipsec-attributes pre-shared-key * tunnel-group x.x.x.46 type ipsec-l2l tunnel-group x.x.x.46 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.4 type ipsec-l2l tunnel-group x.x.x.4 ipsec-attributes pre-shared-key * tunnel-group x.x.x.110 type ipsec-l2l tunnel-group x.x.x.110 ipsec-attributes pre-shared-key * tunnel-group 78.x.x.110 type ipsec-l2l tunnel-group 78.x.x.110 ipsec-attributes pre-shared-key * tunnel-group x.x.x.47 type ipsec-l2l tunnel-group x.x.x.47 ipsec-attributes pre-shared-key * tunnel-group x.x.x.34 type ipsec-l2l tunnel-group x.x.x.34 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x..129 type ipsec-l2l tunnel-group x.x.x.129 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.94 type ipsec-l2l tunnel-group x.x.x.94 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.40 type ipsec-l2l tunnel-group x.x.x.40 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.65 type ipsec-l2l tunnel-group x.x.x.65 ipsec-attributes pre-shared-key * tunnel-group x.x.x.70 type ipsec-l2l tunnel-group x.x.x.70 ipsec-attributes pre-shared-key * tunnel-group x.x.x.134 type ipsec-l2l tunnel-group x.x.x.134 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.163 type ipsec-l2l tunnel-group x.x.x.163 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.2 type ipsec-l2l tunnel-group x.x.x.2 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group ASA-LAN-VPN type remote-access tunnel-group ASA-LAN-VPN general-attributes address-pool RAS-VPN authentication-server-group vpn authentication-server-group (outside) vpn default-group-policy ASA-LAN-VPN tunnel-group ASA-LAN-VPN ipsec-attributes pre-shared-key * tunnel-group x.x.x.184 type ipsec-l2l tunnel-group x.x.x.184 ipsec-attributes pre-shared-key * tunnel-group x.x.x.145 type ipsec-l2l tunnel-group x.x.x.145 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.75 type ipsec-l2l tunnel-group x.x.x.75 ipsec-attributes pre-shared-key * tunnel-group x.x.x.246 type ipsec-l2l tunnel-group x.x.x.246 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.2 type ipsec-l2l tunnel-group x.x.x..2 ipsec-attributes pre-shared-key * tunnel-group x.x.x.98 type ipsec-l2l tunnel-group x.x.x.98 ipsec-attributes pre-shared-key * ! ! ! policy-map global_policy description Netflow class class-default flow-export event-type all destination MS-ISA-Server policy-map type inspect dns migrated_dns_map_1 parameters message-length maximum 512 Anyone have a clue because Im on the verge of going postal.....

    Read the article

  • VPN Connection causes DNS to use wrong DNS server

    - by Bryan
    I have a Windows 7 PC on our company network (which is a member of our Active Directory). Everything works fine until I open a VPN connection to a customer's site. When I do connect, I lose network access to shares on the network, including directories such as 'Application Data' that we have a folder redirection policy for. As you can imagine, this makes working on the PC very difficult, as desktop shortcuts stop working, software stops working properly due to having 'Application Data' pulled from under it. Our network is routed (10.58.5.0/24), with other local subnets existing within the scope of 10.58.0.0/16. The remote network is on 192.168.0.0/24. I've tracked the issue down to being DNS related. As soon as I open the VPN tunnel, all my DNS traffic goes via the remote network, which explains the loss of local resources, but my question is, how can I force local DNS queries to go to our local DNS servers rather than our customers? The output of ipconfig /all when not connected to the VPN is below: Windows IP Configuration Host Name . . . . . . . . . . . . : 7k5xy4j Primary Dns Suffix . . . . . . . : mydomain.local Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : mydomain.local Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : mydomain.local Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet Physical Address. . . . . . . . . : F0-4D-A2-DB-3B-CA DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::9457:c5e0:6f10:b298%10(Preferred) IPv4 Address. . . . . . . . . . . : 10.58.5.89(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 31 January 2012 15:55:47 Lease Expires . . . . . . . . . . : 10 February 2012 10:11:30 Default Gateway . . . . . . . . . : 10.58.5.1 DHCP Server . . . . . . . . . . . : 10.58.3.32 DHCPv6 IAID . . . . . . . . . . . : 250629538 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-AC-76-2D-F0-4D-A2-DB-3B-CA DNS Servers . . . . . . . . . . . : 10.58.3.32 10.58.3.33 NetBIOS over Tcpip. . . . . . . . : Enabled This is the output of the same command with the VPN tunnel connected: Windows IP Configuration Host Name . . . . . . . . . . . . : 7k5xy4j Primary Dns Suffix . . . . . . . : mydomain.local Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : mydomain.local PPP adapter Customer Domain: Connection-specific DNS Suffix . : customerdomain.com Description . . . . . . . . . . . : CustomerDomain Physical Address. . . . . . . . . : DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.0.85(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 192.168.0.16 192.168.0.17 Primary WINS Server . . . . . . . : 192.168.0.17 NetBIOS over Tcpip. . . . . . . . : Disabled Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : mydomain.local Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet Physical Address. . . . . . . . . : F0-4D-A2-DB-3B-CA DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::9457:c5e0:6f10:b298%10(Preferred) IPv4 Address. . . . . . . . . . . : 10.58.5.89(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 31 January 2012 15:55:47 Lease Expires . . . . . . . . . . : 10 February 2012 10:11:30 Default Gateway . . . . . . . . . : 10.58.5.1 DHCP Server . . . . . . . . . . . : 10.58.3.32 DHCPv6 IAID . . . . . . . . . . . : 250629538 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-AC-76-2D-F0-4D-A2-DB-3B-CA DNS Servers . . . . . . . . . . . : 10.58.3.32 10.58.3.33 NetBIOS over Tcpip. . . . . . . . : Enabled Routing table Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.58.5.1 10.58.5.89 20 10.58.5.0 255.255.255.0 On-link 10.58.5.89 276 10.58.5.89 255.255.255.255 On-link 10.58.5.89 276 10.58.5.255 255.255.255.255 On-link 10.58.5.89 276 91.194.153.42 255.255.255.255 10.58.5.1 10.58.5.89 21 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.0.0 255.255.255.0 192.168.0.95 192.168.0.85 21 192.168.0.85 255.255.255.255 On-link 192.168.0.85 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.58.5.89 276 224.0.0.0 240.0.0.0 On-link 192.168.0.85 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.58.5.89 276 255.255.255.255 255.255.255.255 On-link 192.168.0.85 276 The binding order for the interfaces is as follows: I've not configured the VPN tunnel to use the default gateway at the remote end, and network comms to nodes on both networks are fine. (i.e. I can ping any node on our network or the remote network). I've modified the PPTP connection properties to use the DNS servers 10.58.3.32 followed by 192.168.0.16, yet the query still goes to 192.168.0.16. Edit: The local resources that disappear are hosted on domain DFS roots, which might (or might not) be relevant.

    Read the article

< Previous Page | 1 2