Search Results

Search found 289 results on 12 pages for 'efi'.

Page 2/12 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Sony VAIO is booting directly into Windows without showing grub

  - by Rohan Dhruva

  I bought a new Sony Vaio S series laptop. It uses Insyde H2O BIOS EFI, and trying to install Linux on it is driving me crazy. root@kubuntu:~# parted /dev/sda print Model: ATA Hitachi HTS72756 (scsi) Disk /dev/sda: 640GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 274MB 273MB fat32 EFI system partition hidden 2 274MB 20.8GB 20.6GB ntfs Basic data partition hidden, diag 3 20.8GB 21.1GB 273MB fat32 EFI system partition boot 4 21.1GB 21.3GB 134MB Microsoft reserved partition msftres 5 21.3GB 342GB 320GB ntfs Basic data partition 6 342GB 358GB 16.1GB ext4 Basic data partition 7 358GB 374GB 16.1GB ntfs Basic data partition 8 374GB 640GB 266GB ntfs Basic data partition What is surprising is that there are 2 EFI system partitions on the disk. The sda2 partition is a 20gb recovery partition which loads windows with a basic recovery interface. This is accessible by pressing the "ASSIST" button as opposed to the normal power button. I presume that the sda1 EFI System Partition (ESP) loads into this recovery. The sda3 ESP has more fleshed out entries for Microsoft Windows, which actually goes into Windows 7 (as confirmed by bcdedit.exe on Windows). Ubuntu is installed on sda6, and while installation I chose sda3 as my boot partition. The installer correctly created a sda3/EFI/ubuntu/grubx64.efi application. The real problem: for the life of me, I can't set it to be the default! I tried creating a sda3/startup.nsh which called grubx64.efi, but it didn't help -- on rebooting, the system still boots into windows. I tried using efibootmgr, and that shows as it it worked: root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager root@kubuntu:~# efibootmgr --create --gpt --disk /dev/sda --part 3 --write-signature --label "GRUB2" --loader "\\EFI\\ubuntu\\grubx64.efi" BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 However, on rebooting, as you guessed, the machine rebooted directly back into Windows. The only things I can think of are: The sda1 partition is somehow being used Overwrite /EFI/Boot/bootx64.efi and /EFI/Microsoft/Boot/bootmgfw.efi with grubx64.efi [but this seems really radical]. Can anyone please help me out? Thanks -- any help is greatly appreciated, as this issue is driving me crazy!

  Read the article

• grub-efi refuses to chainload Windows 8.1

  - by Alexei Averchenko

  I have installed LMDE (with grub in MBR) after I installed Windows 8.1. I then installed the grub-efi package and added the custom Windows options: #!/bin/sh exec tail -n +3 $0 menuentry "Windows" { search --fs-uuid --no-floppy --set=root A89A-7F4C chainloader (${root})/EFI/Boot/bkpbootx64.efi } menuentry "Windows (backup bootloader)" { search --fs-uuid --no-floppy --set=root A89A-7F4C chainloader (${root})/EFI/Microsoft/Boot/bkpbootmgfw.efi } These are basically a leftover from my older Ubuntu setup. However, grub is refusing to load them, complaining about the invalid signature. What do I do now?

  Read the article

• Can I delete EFI System Partition without harming other data on drive?

  - by Andy

  I have three external HDD's in a USB enclosure. After a recent upgrade to Win7, during which these three drives were actually installed inside the PC tower, two of the three drives now have a 200MB EFI partition, and the two drives do not show up as usable drives under either Win7 or Snow Leopard. One of the drives is empty; the other one, however, has a bunch of stuff on it that I want to save if possible. My question is, how can I get back to this data? Can I simply delete the EFI partition, and all will be well? Or do I have to do something trickier? Or am I just hosed?

  Read the article

• On dual-boot iMac, after fixing "EFI Boot" issue, will booting Windows cause the same issue again?

  - by Shane

  On my dual-boot iMac, after fixing the well-known "EFI Boot" issue, will booting Windows cause the same issue again? I'm hesitant to try booting Windows until I hear from others. Details: It all started when I had been working in Windows and then re-booted into Mac OSX Snow Leopard. Any attempt to boot into OSX would result in two giveaway symptoms: 1) The MAC HD was re-named "EFI Boot", and 2) a gray progress bar stopped at 10% and the spinning wheel kept spinning - no joy. Many articles on Mac Forums describe the same thing, including the fix, which is to erasing the damaged partition and either: a) re-install the OS from DVD, or b) perform a Time Machine RESTORE (which I did). Is there anything I can do to keep enjoying the benefits of a dual-boot iMac without fear of a repeat problem and associated 2-hour restore from Time Machine?

  Read the article

• Ubuntu Server 13.04.3 doesn't boot w/ EFI

  - by user1004816

  I'm was actually trying to install Debian Wheezy (which failed horribly), then tried Ubuntu Server 13.04 and got the exact same problems as w/ Debian: After installing, the system doesn't show any boot-selection and tells me "Missing operating system". My setup is pretty simple: /dev/sdc - 1TB HDD (+ 3 other NTFS HDD) /dev/sdc1 - EFI, 100MiB, bootable /dev/sdc4 - ext4, 65GiB, Ubuntu/Debian (sdc2 & 3 are NTFS w/ data. Sorta lacking SATA-ports, therefore no OS-only HDD/SSD) Grub seems to be installed on /dev/sdc4, /dev/sdc1 only contains a "EFI"-folder. Not sure if thats correct. I used UNetbootin on OS X to make an 8GB USB-drive bootable and used the standard amd64-iso, running a perl-script wich eradicates a couple of naming-errors (different story). Using this tutorial and actually disabling UEFI and using legacy only dind't work either, the usb drive dind't even bother to boot. I'm pretty clueless here. I'd just like to install and use either Debian oder Ubuntu Server!

  Read the article

• Does the Ubuntu mini.iso work with EFI?

  - by jean388

  I have to install Ubuntu 11.10 from the AMD64 mini.iso on a system with UEFI BIOS motherboard. I have configured a virtual machine in VirtualBox for making a test install before I setup the real system. In VirtualBox I have enabled EFI. When the virtual machine is powered on and boot mini.iso the Grub commandline is shown. If I try to boot the normal Ubuntu CD it works fine and I get the normal boot options "Install Ubuntu" etc. Does Ubuntu mini.iso not work with EFI?

  Read the article

• Wrong EFI System Partition GUID?

  - by artificer

  On a new GPT initialized disk (second PC disk) I created a FAT32 partition using gparted. I want to use it as an EFI System Partition so I flagged it as boot. After that I checked the UUID using the gparted “partition information” option and it reported: 09B1-97A5. As far as I understand it should be C12A7328-F81F-11D2-BA4B-00A0C93EC93B. I also checked my running operative system disk (Ubuntu 14) and found that Gparted reports EB78-9AD2 for my actual boot partition UUID. What exactly is gparted reporting as UUID on my EFI system partition and why it doesn’t match with the expected C12A7328-F81F-11D2-BA4B-00A0C93EC93B ID?

  Read the article

• Timeout option not working on efi windows 7/windows8 dual boot machine

  - by Guenter

  I hav a gigbyte GA-Z77m-D3h mobo and installed Windows 8 Pro and Windows 7 Ultimate on two SSDs (in that order) in EFI mode. Now when I start my computer, I get the windows boot menu (text mode) with the two OSses to choose, but I have to manually press RETURN to have the computer boot into the Win OS. Even if I wait an hour, no default action takes place. Using bcdedit (from either of the OSses) I can successfully change the time out value, and it shows up in the bcdedit (no params) output. But it doesn't fire ... Here is my current BCDEdit output (headers are in German, but values should be readable): Windows-Start-Manager --------------------- Bezeichner {bootmgr} device partition=O: path \EFI\Microsoft\Boot\bootmgfw.efi description Windows Boot Manager locale de-DE inherit {globalsettings} integrityservices Enable default {default} resumeobject {5ad2802c-c60a-11e2-acdb-80331c501b11} displayorder {default} {current} {5ad2802a-c60a-11e2-acdb-80331c501b11} {5ad28028-c60a-11e2-acdb-80331c501b11} {5ad28029-c60a-11e2-acdb-80331c501b11} toolsdisplayorder {memdiag} timeout 5 displaybootmenu Yes Windows-Startladeprogramm ------------------------- Bezeichner {default} device partition=W: path \Windows\system32\winload.efi description Windows 7 locale de-DE inherit {bootloadersettings} recoverysequence {5ad2802e-c60a-11e2-acdb-80331c501b11} recoveryenabled Yes osdevice partition=W: systemroot \Windows resumeobject {5ad2802c-c60a-11e2-acdb-80331c501b11} nx OptIn Windows-Startladeprogramm ------------------------- Bezeichner {current} device partition=C: path \Windows\system32\winload.efi description Windows 8 locale de-DE inherit {bootloadersettings} recoverysequence {5ad28033-c60a-11e2-acdb-80331c501b11} integrityservices Enable recoveryenabled Yes isolatedcontext Yes allowedinmemorysettings 0x15000075 osdevice partition=C: systemroot \Windows resumeobject {5ad28031-c60a-11e2-acdb-80331c501b11} nx OptIn bootmenupolicy Standard hypervisorlaunchtype Auto (this output is from Win8; the Win7 looks nearly identical) If maybe the problem comes from a bad EFI Windows boot manager installation, can this be fixed without loosing my windows installations?

  Read the article

• Lenovo Windows 8 EFI restore from image

  - by anderhil

  First time here. I have bought e530 with windows 8 and the first hour of work with it i have a problem. I have ssd with windows 7 which i want to use with my new e530. I have made a sysprep of win 7 and installed ssd to the e530. The HDD which was inside e530 i want to use as second hdd instead of my DVD Drive. I connected this HDD through usb-to-sata adapter to copy some files from ssd to the hdd. Unfortunately it didn't see the file system on the HDD (but first time i have booted to it and first boot into Windows 8) I've made some mistakes and i corrupt the filesystem on the hdd. I tried bunch of tricks to recover the GPT, but it didn't work. I have managed to recover the Lenovo_Recovery partition to my ssd using recovery tools. And now I'm stuck, with this new things to me - EFI, GPT, etc i don't how this stuff works, and i have been trying to understand this for hours - but nothing seems to work. I want to restore the Windows 8 to the hdd, so it is there alive. What i have done so far: Formated the HDD I took the PBRALL file from the Lenovo_Recovery " convert gpt create partition Primary size=1000 ID=DE94BBA4-06D1-4D40-A16A-BFD50179D6AC gpt attributes=0x8000000000000001 assign letter=W format quick LABEL=WINRE_DRV create partition efi size=260 assign letter=s format quick fs=fat32 LABEL=SYSTEM_DRV create par msr size=128 create partition primary noerr assign letter=t format quick LABEL=Windows8_OS shrink desired=12197 create partition Primary ID=DE94BBA4-06D1-4D40-A16A-BFD50179D6AC gpt attributes=0x8000000000000001 assign letter=q format quick LABEL=Lenovo_Recovery " it recreated the partitions copied contents of SDRIVE.zip to SYSTEM_DRV partition copied contents of WDRIVE.zip to WINRE_DRV partition Copied restored Lenovo_Recovery back to Lenovo_Recovery partition So now I have 3 system partitions: SYSTE_DRV BOOT boot.sdi EFI BOOT bootx64.efi LenovoBT.efi Lenovo ... Microsoft ... WINRE_DRV\Recovery\WindowsRE\winre.wim Lenovo_Recovery (whic contains install.wim and bunch of other things) So i put back the HDD inside the laptop and tried to boot - but nothing works. It just doesn't boot to anything - no errors - nothing at all. When I choose this HDD manually for boot - just black screen blinks and that's all - it returns back to the devices boot menu. SYSTEM_DRV is EFI partition, so I don't understand why it doesn't boot, it has files needed inside. Can anybody tell me what should be done to make it boot to recovery console or smth like that? How to restore the Windows 8 from the Lenovo_Recovery install.wim image? As I understand I have all the files where they should be, but why it doesn't work? How to troubleshoot such things? Also, if somebody has good link where EFI booting process is explained in details that would be great. Cause i still don't understand how it knows what partition to boot?

  Read the article

• Installing Ubuntu in EFI mode Cant go beyond GRUB Menu

  - by Vulcan

  I created a LiveUSB of Ubuntu 12.04.3 LTS using Pendrive Linux. -Created a separate 30GB partition using Windows 8 Disk Management -Disabled Secure Boot (Didn't find an option to disable EFI boot) -Disabled Fast Startup The laptop starts the GRUB menu shows up but it doesn't go beyond that no matter what option i choose. After choosing any option the screen goes blank but the power is still on i can see the power light. My laptop is HP-n012tx processor- Intel i5 4200U Video Card- 2GBnVidia 740M The GRUB menu i see http://i.stack.imgur.com/buEAn.png

  Read the article

• EFI vs MBR - Installing Windows Server 2008 R2 or 2012 on 8TB

  - by Riaan de Lange

  I'm having some difficulty installing Windows Server 2008 R2 and Windows Server 2012 on an Intel Server platform. The server specs is as follows: Intel Grizzly Pass Server System - R2308GZ4GC 2x Intel Xeon 2620 - 2.0 GHZ - BX80621E52620 132 GB of Memory REG-DIMM - TS1GKR72V6H 4x Seagate Constellation ES 2TB 3.5" 7200rpm 6GB/S - ST32000645NS Intel Big Laurel 4CH 6G SAS RAID 512MB - RS2BL040 On the Intel RAID Controller Setup, I have setup the HDD to be in RAID-0 - for testing purposes. (Ultimately configured in RAID-5) So, the total size of HDD space I can use is 7.6 TB something... When I install the Server OS's, they don't seem to go beyond 2 TB (1.76 TB) I have read up on EFI and UEFI boot, and this seems to work in 2012, but I could not install any drivers for the motherboard... So, I also tried EFI for 2008R2, and this worked while installing the OS, it did not however work with the Windows Boot Manager option in the BIOS. It kept on freezing once it tries to load the partition. My idea was to allocate the complete 8 TB for the OS, and load a few VM's on there. I have now started with a new approach where I'll have a 256 GB OS Partition, and a secondary 7.5 TB Data partition. Oh, and I also did a diskpart - convert disk to gpt whilst installing 2008R2. The whole disk was accessible, 7.6TB Can anyone please clarify that EFI/UEFI is meant for larger boot volumes? Bigger than 2TB. If I were to have an ideal situation where my OS is run on a SSD, 256GB, and I can attach the 8 TB drives as normal disk to the OS? I'm I correct in saying that if I wanted to boot from a 8TB partition, I would need to force the BIOS to boot from EFI? The limit for MBR is 2 TB as far as I know now... *FYI: The motherboard is EFI-ready

  Read the article

• Repairing or recreating a bootloader on a multi-booting EFI GPT system

  - by Emre

  Reinstalling Ubuntu messed up my boot loader so I I tried to fix it with boot repair. It detected my OSX installation and asked about removing the "separate boot/EFI". It also said my partition was full despite the fact that it wasn't and asked me to remove stuff. I declined both and proceeded. It's been stuck at the "purge and reinstall the GRUB" stage for half an hour. Is this typical, bearing in mind I have a fast SSD and CPU? Is there a better way to re-install grub on a multi-booting UEFI system? Does my pastebin provide any insight?

  Read the article

• Attempting to dual boot Ubuntu and Windows 7 on Sony Vaio with Insyde H2O BIOS

  - by zach

  My situation is the same that is addressed here Sony VAIO with Insyde H2O EFI bios will not boot into GRUB EFI and here http://www.hackourlife.com/sony-vaio-with-insyde-h2o-efi-bios-ubuntu-12-04-dual-boot I tried to install Ubuntu 12.04 from the Live CD alongside my current Windows 7. I have to switch my BIOS to legacy mode in order to boot from CD. If I were to do a normal installation and remain in legacy mode, the BIOS will display "operating system not found". If I switch back then the BIOS just boots to windows. To solve the problem, I tried following the steps in the previous two articles. My drive is partitioned as: sda1 FAT32 Location of Windows EFI files (flagged as boot in Ubuntu install) sda2 unknown sda3 NFTS Windows C: sda4 ext4 Ubuntu root sda5 swap sda6 ext4 Ubuntu home I was a little confused by the requirement in the second article to "be careful to install Grub bootloader in /dev/sda3" In my case, the relevant partition is sda1. I have tried three things: setting the sda1 mount point as /boot, as /boot/efi, and as the special reserved grub partition. In each install I indicated that grub should be installed in sda1. After each install I reboot to the live CD and look in the sda1. I see EFI/Boot and EFI/Windows, but no EFI/Ubuntu and consequently no grubx64.efi. I understand the recommended procedure of moving grubx64.efi into the EFI/Boot directory and replacing the present bootx64.efi file, but I see no grubx64.efi and I don't know where it should be.

  Read the article

• Installed on a machine with EFI and after installation, it says the disk is not bootable

  - by Roy Hocknull

  I installed Ubuntu 11.10 and the installation runs through fine. It then says reboot, and the machine says 'inserts a boot disk' which means the hard disk isn't bootable. The primary hard disk is an EFI device, and nothing seems to work. The machine in question is an Acer Aspire M3970 desktop. Core i5 2300, with 8Gb Ram. Main boot drive is an SSD (Vertex 2E 60Gb). I am trying to install the 11.10 x64 version. The installation I have tried from CD and USB stick. It goes through the install, allows you to partition the drives then installs all the packages. At the end it goes for a reboot, and asks you to remove the installation media. The PC then restarts and says no bootable disk. I tried it many times. In the end I have installed Fedora 15 x64 which works straight away with no messing. Unless this issues is fixed I have to drop 11.10 as a viable option. From my experience F15 isn't quite as polished as Ubuntu, but in this case - it works!! Is this a widespread problem or am I unique?

  Read the article

• Configure Dual Boot, Windows 7 and Ubuntu 12.04 with or without EFI

  - by Keroak

  I have just installed Ubuntu 12.04 on a laptop with Windows 7 but I don't get to boot from Ubuntu. First, during the installation I made these partitions (may be too many): /dev/sda1 FAT32 SYSTEM 200Mb boot (EFI boot, i guess) /dev/sda2 unknown file system 128 Mb msftres (Windows Boot Manager) /dev/sda3 NTFS OS 100 Gb (Windows 7) /dev/sda4 NTFS DATOS 315 Gb (Data partition) /dev/sda5 ext4 28 Gb (/home) /dev/sda8 unknown file system 1 Gb biog_grub (i'm not very sure why i made this one) /dev/sda6 ext4 17 Gb (/ Ubuntu 12.03 installed withou errors aparently) /dev/sda7 linex-swap 2 GB (swap) I can boot from Windows perfectly. Actually I tried to configure Windows Boot Manager with EasyBCD but it doesn't recognize any boot entry. Anyway, I added an Ubuntu Entry and it configured it automatically. Now I have boot entries the Windows 7 one that appear to work and the Ubuntu 12.04 that it prompt a "No application found" message. I re-started from a USB with Ubuntu and tried to fix GRUB from the command-line and with boot-repair. No results. As far as I understand I have to tell the Windows Boot Manager where my Ubuntu boot loader is. So I have two problems: Actually, I don't know where my Ubuntu boot loader, GRUB or GRUB2 or whatever, is. I don't know how to set my Ubuntu entry in Windows Boot Manager. I guess using BCDedit.exe as EasyBCD didn't show me the entries. Anyway, I don't know what parameters to use. I read several articles about it but i didn't find out anything useful.

  Read the article

• Windows 7 EFI Partition Deleted

  - by Sam Clark

  I converted my Windows 7 GPT disk to dynamic, which resulted in it being unable to boot. So I used EaseUs Partition Master on my second Win 7 installation to convert the disk back to basic. Now, I have one partition, which is my C: drive, and I can't figure out how to recovery my EFI partition. I no longer see the "Windows" entry in my EFI boot menu. The Windows 7 repair on the install DVD doesn't see my installation. Please let me know how to restore the EFI partition.

  Read the article

• EFI VMware Virtual SCSI Hard Drive (0.0) ... unsuccessful

  - by Ravichandra

  I installed the VMware-workstation-full-8.0.0-471780 and created new virtual michin with Mac OSX 10.6.6 with 4GB Ram, 1 Processer, 40GB Hard Disk(SCSI) and General -- Guest Operating system : Apple Mac OS X, Version: Mac OS Server 10.6. when I Power On the the VMWare gives the follwing unsuccessfull comments. -- EFI VMware Virtual SCSI Hard Drive (0.0) ... unsuccessful -- EFI VMware Virtual IDE CDROM Drive (IDE 1.0) ... unsuccessful Could you please help me. how to solve this errors

  Read the article

• Restore Windows 8 and Linux (Debian) /boot/efi

  - by Loic

  I deleted /boot/efi (while attempting to install archlinux). There is one harddrive, 750GB, /dev/sda). The partitions are /dev/sda1 ntfs 315MB /dev/sda2 EFIboot 105MB <=== this got deleted /dev/sda3 ? 135MB /dev/sda4 ntfs 626GB <======= windows 8 /dev/sda5 ntfs /dev/sda6 biosgrub 1MB ? /dev/sda7 lvm 110GB <======== for linux /dev/sda8 swap 13GB Windows 8 still installed on /dev/sda4 How do I recreate / repair the /boot/efi (/dev/sda2) ?

  Read the article

• Unable to boot to Ubuntu

  - by nsk

  Just got a new laptop and removed Windows 8 and installed 13.10 using LiveUSB. Initially it was booting to "No boot media" but I was able to resolve it with boot-repair. I realized some of the items I need isn't supported on 13.10, so attempted to install 13.04 instead. Now without LiveUSB, the laptop just boots to "No boot media" but boot repair doesn't seem to be fixing it. Tried going back to 13.10, but no dice. After boot repair it says "Please do not forget to make your BIOS boot on sda1/EFI/ubuntu/grubx64.efi file!". GParted shows sda1 has the boot flag. Using Toshiba Satellite P50. Secure Boot disabled. UEFI enabled. Any help would be highly appreciated. http://paste.ubuntu.com/6366556/

  Read the article

• Preinstalled Windows 8 and Linux UEFI dual boot on a laptop

  - by itchy355

  I am trying to set up Windows 8 and Arch Linux on a new Sony Vaio E14 with preinstalled windows 8. So far: installed W8 to my new SSD (switched for the original HDD) using Recovery Media shrunk the W8 partition, deleted recovery partition, disabled swap confirmed W8 booting just fine On to Arch: disabled Secure Boot in bios confirmed W8 booting just fine Booted Arch off the CD and installed everything to 4th and 5th partition set up rEFInd for EFIstub kernel bootloader After that it got worse. I was unable to boot anything else than Windows 8 (although I was glad that they at least kept working just fine). Tried: creating EFI\refind\ and putting the .efi there (as per Arch manual overwriting EFI\boot\bootx64.efi overwriting EFI\Microsoft\Boot\bootmgr.efi overwriting EFI\Microsoft\Boot\bootmgfw.efi --- YAY rEFInd shown up! So far, so good. I've kept the whole W8 Boot\ directory in EFI\windows8 and set up a boot menuentry for it; and it booted just fine. But, upon restart, everything was wrong -- 'Operating system not found' instead of any bootloader (refind or w8). Booted back into Arch using the live CD to find out that the EFI partition had erroneous FAT table. fsck.vfat fixed it, and I've found that EFI\Microsoft\Boot was back to it's original state (all refind files deleted and replaced with W8 bootloaders). I've overwritten them again and got back to rEFInd showing up correctly and Arch being perfectly bootable. After that I've tried only renaming EFI\Microsoft\Boot\bootmgfw.efi to bootmgfw.001.efi (then copying refind's .efi to bootmgfw.efi and keeping EVERY OTHER file as it was), but with exactly the same result. Tried marking the GPT EFI partition as read-only, same result. Now I'm kinda out of luck. Arch boots fine, so does W8 but it destroys the EFI partition in the process. Thanks for any ideas, Googling brought me this far and I can't find any better. PS -- windows 8 MAYBE destroys the partition upon shutdown -- when I order a shutdown in W8, it takes unusually long (about half a minute instead of ~5 seconds). So in theory I could solve this by hard-resetting the laptop instead of a normal shutdown, but that's just not nice.

  Read the article

• EFI pxe network boot error

  - by Lee

  Asking this on both [serverfault][1] and [superuser][2]. When attempting to network boot RHEL 5.4 on an old ia64 machine I get the following error : ![alt text][3] So I've basically followed the tutorial here : [http://www-uxsup.csx.cam.ac.uk/pub/doc/suse/sles9/adminguide-sles9/ch04s03.html][4] DHCPD,TFTPD etc are already setup and working with standard x86 PXE clients. I've unpacked the boot.img file into /tftpboot/ia64/ and passed the path to the elilo.efi file via DHCP with the filename ""; option. Changing this filename generates a PXE file not found error (see below). So I assume that PXE has found the file... ![alt text][5] The only thing wrong I can find in the logs is : Jan 6 19:49:31 dhcphost in.tftpd[31379]: tftp: client does not accept options Any ideas? I'm sure I hit a problem like this a few years ago but I can't remember the fix :) Thanks in advance! Thanks in advance! [1]: http:// serverfault.com/questions/100188/ efi-pxe-network-boot-error [2]: http:// superuser.com/questions/92295/ efi-pxe-network-boot-error [3]: http:// i.imgur.com/Zx1Jy. png [4]: http:// www-uxsup.csx.cam.ac.uk/pub/doc/suse/sles9/adminguide-sles9/ch04s03.html [5]: http:// i.imgur.com/CEzGf. jpg

  Read the article

• How to reinstall Windows Boot Manager on EFI partition

  - by joaocandre

  So I've been trying to install Ubuntu on a second HDD on my desktop, which has W8 installed on a SSD (UEFI-only boot). Thing is, during Ubuntu installation I made the mistake of choosing to install the bootloader (GRUB) to the first disk (the SSD), and after install I could not boot into W8 (the entries in GRUB didn't work). Following these instructions, I managed to be able to get "Windows Boot Manager" back, however I lost GRUB in the process, and got a duplicate "Windows Boot Manager" entry in BIOS, along with the "Ubuntu" entry, which then I used to boot into Ubuntu. Later, I decided to reinstall Ubuntu, and formatted the HDD from within windows, however, the entries in BIOS stayed the same, and, while I had the HDD connected to the motherboard, I could not boot into an Ubuntu Live USB (in order to reinstall Ubuntu). I made another mistake by updating the BIOS, which cleared all of the EFI boot entries in BIOS, and, right now, I get an error when boot from the SSD: grub: device not found (...) So it seems that grub is still installed in the EFI partition of the SSD, and since I don't have the WBM entry in BIOS anymore, I cannot even boot into Windows, and the previous instructions don't work anymore. Is there another way to reset W8 EFI partition to the default?

  Read the article

• Installing Ubuntu 12.04 on EFI system

  - by aniruddhabhide

  Fellas, need help. Trying to install Ubuntu 12.04 on laptop to dual boot alongside Win7. I have UEFI and GPT partitioning scheme. It has optional Legacy boot mode though. I can boot from Ubuntu USB/CD in both Legacy and UEFI modes. But when I reach partition selection step, it gives me error "ubi-partman failed with exit code 141". I searched forums for this but those who encountered this error said it was resolved when they detached one of two HDs in their system. But I have only one hard disk attached and I am sure Ubuntu's GRUB supports GPT. But looks like it is not able to read GPT partitions on my HD. Any help regarding this will be appreciated.

  Read the article

• How to Dual Boot Windows 7 x64 and Ubuntu 13.04 x64 as BIOS, not EFI

  - by Dizeke

  I want to dual boot windows 7 x64 and ubuntu 13.04 x64, but when I installed it, it doesn't boot. Only windows was booting. I installed ubuntu with " / " 50GB and a "swap" partition 4GB. Could it be that it doesn't work because I'm on bios mode, and that my disk is MBR, not GPT. My laptop doesn't have an option to change boot mode to UEFI so as much as possible, I'd stick to MBR :( Acer Aspire 4755G Intel i5-2450M 2.5Ghz-3.1Ghz Nvidia GeForce GT540M 2GB 4GB RAM DDR3

  Read the article

• Convert from EFI to BIOS boot

  - by Lukas F.

  I have a Samsung Notebook NP900X4C with an LUKS encrypted installation of Linux Mint 15 on it. The system is booting in UEFI mode. The problem is that the samsung-notebook kernel module is disabled in UEFI mode and due to that I am missing features like the keyboard backlight. Is it possible to modify the current installtion so it can boot in BIOS mode? Is this correct that the basic steps would be converting the disk from GPT to MBR and installing grub from a live CD? Would this be possible with a LUKS partition?

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >