Search Results

Search found 344 results on 14 pages for 'ethan hunt'.

Page 2/14 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• iptables openvpn forward selectively from eth to tun

  - by Bryan Hunt

  Simple for those who know, indecipherable for those who don't... I'm running openVPN on (hypothetical) 66.66.66.66, I want to FORWARD incoming traffic, arriving on interface eth0 to interface tun0. It would also be nice to filter - based on destination IP address. I'm doing the NAT later on, but like to lock down early wherever possible. So onto the main course... This works: #Enable forwarding from eth0 to tun0 iptables -A FORWARD -i eth0 -o tun+ -j ACCEPT But this doesn't pass any packets whatsoever: #Stricter version iptables -A FORWARD -i eth0 -o tun+ --dst 66.66.66.66 -j ACCEPT Am I being unacceptably foolish?

  Read the article

• pfSense 2.1 OpenVPN client not using tunnelled interface

  - by Brian M. Hunt

  I'm having some trouble getting OpenVPN working on my pfSense box. The issue is quite strange to me. When I have the OpenVPN turned on, only my router is able to connect to the Internet. From the router I can use ping, links, etc., and connections work exactly as expected - through the VPN, with the IP address assigned by my VPN provider (Proxy.sh, incidentally). However, none of the clients on the local network can connect to the Internet. I get timeouts when using ping or a web browser. I can ping my router, and the IP address of the gateway. When I switch the default gateway from the VPN to my ISP's gateway, all works exactly as expected. Here the routing table (netstat -r) when in VPN mode, and a key for it: IPv4 Destination Gateway Flags Refs Use Mtu Netif Expire 0.0.0.0/1 10.XX.X.53 UGS 0 122 1500 ovpnc1 = default 10.XX.X.53 UGS 0 235 1500 ovpnc1 8.8.8.8 10.XX.X.53 UGHS 0 82 1500 ovpnc1 10.XX.X.1/32 10.11.0.53 UGS 0 0 1500 ovpnc1 10.XX.X.53 link#12 UH 0 0 1500 ovpnc1 10.XX.X.54 link#12 UHS 0 0 16384 lo0 ZZ.XX.XXX.0/20 link#1 U 0 83 1500 re0 ZZ.XX.XXX.XXX link#1 UHS 0 0 16384 lo0 127.0.0.1 link#9 UH 0 12 16384 lo0 128.0.0.0/1 10.11.0.53 UGS 0 123 1500 ovpnc1 192.168.1.0/24 link#11 U 0 1434 1500 ue0 192.168.1.1 link#11 UHS 0 0 16384 lo0 YYY.YYY.YYY.YYY/32 ZZ.XX.XXX.1 UGS 0 249 1500 re0 IP addresses 10.XX.X.53/54 - My DHCP-assigned IP address/pair from the VPN provider ZZ.XX.XXX.XXX - My external IP assigned by my ISP YYY.YYY.YYY.YYY - The external IP assigned by the VPN provider Interfaces ovpnc1 - My VPN client interface re0 - My LAN interface ue0 - My WAN interface This looks essentially what I would expect it to be. The default route is through the VPN provider. The VPN address is routed through the ISP-assigned IP address. I am not sure what would be wrong here. So figuring this was a firewall issue, I basically tried enabling all in/out traffic. This did not seem to remedy the problem. Also figuring it could possibly be some client networking issue, I restarted the clients on the LAN. This did not help. I also ran route flush and reset the routes manually. So I am a bit stumped, and would be very grateful for any thoughts on what the problem might be.

  Read the article

• How do you install Firefox plugins from a file?

  - by Ethan

  I would like to install this SQLite Manager plug-in for Firefox on Mac OS X. However, the page advertising the plug-in does not offer the customary "get addon" link (or whatever it's called). There is only the possibility of downloading files. Such as: SQLiteManager_0.5.0b5.xpi How do you use that to install the plug-in?

  Read the article

• Ubuntu boots into command line instead of X.

  - by Ethan Turkeltaub

  I posted this on the Ubuntu forums and they had no good answer. I hope you guys have a solution! On my relatively new install, it's booting into command line instead of X--again. This is the reason I reinstalled in the first place. This has happened to me three times now. So, I boot up and it gets past GRUB, past the glowing Ubuntu option, then it prompts me for my username, then password. I run: startx And that starts the GUI for about a minute, then it runs the GUI login system. To add to the mess, the network-applet is not shown in the panel. Additionally, Chrome will not launch (I ran Firefox from the terminal). What's the problem here?

  Read the article

• set proxy in apache for XMPP chat

  - by Hunt

  I want to setup a proxy settings in Apache to use Facebook XMPP Chat So far I have setup ejabber server and I am able to access xmpp service using http://mydomain.com:5280/xmpp-http-bind I am able to create Jabber Account too. Now as I want to integrate Facebook XMPP chat , I want my server to sit in between client and chat.facebook.com because I want to implement Facebook chat and custom chat too. So I have read this article and come to know that I need to serve BOSH Service as a proxy in apache to access Facebook Chat service. So I don't know how to set up a proxy in a apache httpd.conf as I have tried following <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass /xmpp-httpbind http://www.mydomain.com:5280/xmpp-http-bind ProxyPassReverse /xmpp-httpbind http://www.mydomain.com:5280/xmpp-http-bind But whenever I request http://www.mydomain.com:5280/xmpp-http-bind from strophe.js I am getting following response from server <body type='terminate' condition='internal-server-error' xmlns='http://jabber.org/protocol/httpbind'> BOSH module not started </body> and server log says following E(<0.567.0:ejabberd_http_bind:1239) : You are trying to use BOSH (HTTP Bind) in host "chat.facebook.com", but the module mod_http_bind is not started in that host. Configure your BOSH client to connect to the correct host, or add your desired host to the configuration, or check your 'modules' section in your ejabberd configuration file. here is my existing settings of ejabberd.cfg , but still no luck {5280, ejabberd_http, [ {access,all}, {request_handlers, [ {["pub", "archive"], mod_http_fileserver}, {["xmpp-http-bind"], mod_http_bind} ]}, captcha, http_bind, http_poll, register, web_admin ]} ]}. in a module section {mod_http_bind, [{max_inactivity, 120}]}, and whenever i fire http://www.mydomain.com:5280/xmpp-http-bind url independently am getting following message ejabberd mod_http_bind An implementation of XMPP over BOSH (XEP-0206) This web page is only informative. To use HTTP-Bind you need a Jabber/XMPP client that supports it. I have added chat.facebook.com in a list of host in ejabber.cfg as follows {hosts, ["localhost","mydomain.com","chat.facebook.com"]} and now i am getting following response <body xmlns='http://jabber.org/protocol/httpbind' sid='710da2568460512eeb546545a65980c2704d9a27' wait='300' requests='2' inactivity='120' maxpause='120' polling='2' ver='1.8' from='chat.facebook.com' secure='true' authid='1917430584' xmlns:xmpp='urn:xmpp:xbosh' xmlns:stream='http://etherx.jabber.org/streams' xmpp:version='1.0'> <stream:features xmlns:stream='http://etherx.jabber.org/streams'> <mechanisms xmlns='urn:ietf:params:xml:ns:xmpp-sasl'> <mechanism>DIGEST-MD5</mechanism> <mechanism>PLAIN</mechanism> </mechanisms> <c xmlns='http://jabber.org/protocol/caps' hash='sha-1' node='http://www.process-one.net/en/ejabberd/' ver='yy7di5kE0syuCXOQTXNBTclpNTo='/> <register xmlns='http://jabber.org/features/iq-register'/> </stream:features> </body> if i use valid BOSH service created my jack moffit http://bosh.metajack.im:5280/xmpp-httpbind then i am getting following valid XML from facebook , but from my server i am not getting this <body xmlns='http://jabber.org/protocol/httpbind' inactivity='60' secure='true' authid='B8732AA1' content='text/xml; charset=utf-8' window='3' polling='15' sid='928073b02da55d34eb3c3464b4a40a37' requests='2' wait='300'> <stream:features xmlns:stream='http://etherx.jabber.org/streams' xmlns='jabber:client'> <mechanisms xmlns='urn:ietf:params:xml:ns:xmpp-sasl'> <mechanism>X-FACEBOOK-PLATFORM</mechanism> <mechanism>DIGEST-MD5</mechanism> </mechanisms> </stream:features> </body> Can anyone please help me to resolve the issue

  Read the article

• Set up heads up for two people

  - by Brian M. Hunt

  Is there a way to set up a Mac or Linux so that one can connect two mice and two keyboards with both users having independent input on the screen with their respective mice and keyboards? I'd like to set up an environment for pairwise programming, and in particular have two developers be able to concurrently edit different documents on the same computer screen, but each person having different keyboards and mice. I'd be much obliged for any input and direction.

  Read the article

• install headers-more-nginx-module to existing nginx

  - by Hunt

  i have installed nginx but now i want to install headers-more-nginx-module into existing installation of nginx , so can someone tell me how to do it ? i have found following commands but it is with the new installation of nginx and then headers-more-nginx-module wget 'http://nginx.org/download/nginx-1.2.4.tar.gz' tar -xzvf nginx-1.2.4.tar.gz cd nginx-1.2.4/ # Here we assume you would install you nginx under /opt/nginx/. ./configure --prefix=/opt/nginx \ --add-module=/path/to/headers-more-nginx-module make make install currently i guess my nginx is under where the nginx.conf is placed etc/nginx

  Read the article

• How can I format a USB "thumb drive" so it will be readable on OS X and Windows?

  - by Ethan

  I have an OS X system. I want to use it to put some files on a USB drive and then be able to loan the drive to Mac and XP and Vista users so they can get the files off it. I also need to wipe the drive clean first to make sure there's nothing sensitive on it by accident because I'm going to be passing it around. What the name of the filesystem format I want? What's the procedure? Command line operations are fine.

  Read the article

• failed to enable x11 forwarding

  - by Hunt

  I am trying to enable X11 forwarding on my server which is running on FreeBSD 7.1. I have a putty installed in my windows in which i have enabled X11 forwarding by checking on Enable X11 forwarding and specifying following parameter X display location localhost:0 after that i run putty and checked whether X11 is enabled or not by typing following command echo "$DISPLAY" or echo $DISPLAY but i am getting following error DISPLAY: Undefined variable. Even i have installed XManager but in that also i am getting following error The X11 forwarding request was rejected ! To solve this problem, please turn on the X11 forwarding features of the remote SSH server can anyone suggest me how to get rid off this ?

  Read the article

• Automounting Active Directory home drives on a Linux server on login

  - by Ethan

  I've got a Centos 5.7 box authenticating against Active Directory through PBIS Open (the new LikeWise Open), which works well. Now, I'm trying to get the server to automount the user's AD home directory, located at //ad.server.dom/shares/home directories (Yeah, it's a space in the path. I didn't set this up). Each user has a directory in there with the same name as the user. I've tried to get pam_mount working, but it has a series of issues on RedHat and friends, and I can't seem to get that working. The directory does need to be automounted for the server to perform it's role. My reading on automount seems to suggest that there's no way to get it to do it's thing with authentication, though I'm happy to be proved wrong. I've looked at this resource, but it requires version RedHat (thus CentOS) 6 or higher, and newer packages than I have. I can manually (As root) mount the AD directory using the command mount.cifs "//ad.server.dom/Shares/home directories/testuser" /home/local/AD/testuser/nfs_mount/ -o username=testuser and when I log in as testuser, I can see all of the sample files in the nfs_share directory. Any tips towards the right direction would be highly appreciated. This is going to be on a server at a college, so it needs to be fairly stable, and would lead towards more Linux adoption there.

  Read the article

• Robocopy silently missing files

  - by John Hunt

  I'm using Robocopy to sync data from our server's hard disk to an external disk as a backup. It's a pretty simple solution but pretty much the best/easiest one we could come up with - we use two external disks and rotate them offsite. Anyway, here's the script (with the comments taken out) that I'm using to do it. It works very well, it's quick and almost 100% complete - however it's acting pretty strange with a few files (note company name has been changed in paths to protect the innocent): @ECHO OFF set DATESTAMP=%DATE:~10,4%/%DATE:~4,2%/%DATE:~7,2% %TIME:~0,2%:%TIME:~3,2%:%TIME:~6,2% SET prefix="E:\backup_log-" SET source_dir="M:\Company Names Data\Working Folder\_ADMIN_BACKUP_FILES\COMPA AANY Business Folder_Backup_040407\COMPANY_sales order register\BACKUP CLIENT FOLDERS & CURRENT JOBS pre 270404\CLIENT SALES ORDER REGISTER" SET dest_dir="E:\dest" SET log_fname=%prefix%%date:~-4,4%%date:~-10,2%%date:~-7,2%.log SET what_to_copy=/COPY:DAT /MIR SET options=/R:0 /W:0 /LOG+:%log_fname% /NFL /NDL ROBOCOPY %source_dir% %dest_dir% %what_to_copy% %options% set DATESTAMP=%DATE:~10,4%/%DATE:~4,2%/%DATE:~7,2% %TIME:~0,2%:%TIME:~3,2%:%TIME:~6,2% cscript msg.vbs "Backup completed at %DATESTAMP% - Logs can be found on the E: drive." :END Normally the source would just be M:\Comapany name data\ but I altered the script a bit to test the problem. The following files in the source are not copied to the dest: Someclient\SONICP~1.DOC Someclient\SONICP~2.DOC Someclient\SONICP~3.DOC However, files in the same directory named: TIMESH~1.XLS TIMESH~2.XLS are copied. I'm able to open the files that aren't copied with no trouble at all, and they certainly weren't opened when I ran robocopy so it's not a locking issue. Robocopy is running as administrator so it's not a permissions issue. There's no trace these files were even attempted to be copied as there are no errors being output in the log or in my command prompt. Does anyone have any suggestions as to what this might be? Busted hard disk? Cheers, John.

  Read the article

• Excel - Referring to a certain cell based off of data in another

  - by Ethan Brouwer

  I have a spreadsheet where there is one table with the headings: Coordinate, Lat, Long Another with headings Triangle, Coordinate 1, Coordinate 2, Coordinate 3, Area What this is for, is taking the triangles formed by the specified three coordinates' area based off of Girard's theorem, as they are all spherical triangles. I need to take the specific latitude and longitude values from the first table based on the coordinate numbers underneath the three coordinate headings in the second table. I hope this makes sense. Here are pictures detailing what the two tables look like: Table 1 Table 2 Thanks in advance. And I really do hope this makes sense.

  Read the article

• prevent apt dependency from being satisfied (permanently)

  - by Bryan Hunt

  I want to install mailman (just to use it's mail archiving feature) but Ubuntu wants to pull down a load of extra dependencies. sudo apt-get install mailman Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: apache2 apache2-mpm-worker apache2.2-common Suggested packages: apache2-doc apache2-suexec apache2-suexec-custom spamassassin lynx listadmin Is there any way to mark those packages ( apache2 apache2-mpm-worker apache2.2-common ) as never to be installed? This is not 2002 ;)

  Read the article

• Targus USB-to-RS232 not working with Linux?

  - by Ethan Leroy

  I have the Targus PA088 USB to RS232 converter, but it seems that it does not work with linux. Its RX and TX lights are flashing, but I can't see the data in minicom/picocom. When using it with Windows and hterm, everything's fine. Any idea what could be the problem? Additional info: When I plug in the adapter, I can see the following messages in /var/log/messages.log Nov 25 01:47:31 localhost kernel: [ 831.787066] usb 2-1.1: new full speed USB device number 5 using ehci_hcd Nov 25 01:47:32 localhost kernel: [ 832.554810] mct_u232 2-1.1:1.0: MCT U232 converter detected Nov 25 01:47:32 localhost kernel: [ 832.555002] usb 2-1.1: MCT U232 converter now attached to ttyUSB0 Nov 25 01:47:32 localhost mtp-probe: checking bus 2, device 5: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1" Nov 25 01:47:32 localhost mtp-probe: bus: 2, device: 5 was not an MTP device

  Read the article

• Running IIS command on remote server via Powershell

  - by Paul Hunt

  I am trying to check if an IIS application pool exists on a remote server using a PowerShell script. The command I am running is: test-path "IIS:\AppPools\DefaultAppPool" If I run this script directly on the IIS server in question I get a response back of "True" so this tells me that I have IIS management correctly configure in PowerShell. However when I run the following script from a remote server I get a response of "False" invoke-command -ComputerName IISSERVER -ScriptBlock { test-path "IIS:\AppPools\DefaultAppPool" } I know that PowerShell remoting is correctly configured because I can run the following command and get a list of files invoke-command -ComputerName IISSERVER -ScriptBlock { get-childitems "c:\" } So why am I getting the wrong response about the existence of the application pool?

  Read the article

• Make and receive calls from and to PC to mobile and vice versa

  - by Hunt

  I want to route normal phone calls (i.e. calls made from landline or mobile) to VoIP and vice versa. Fr example, if I dial a number from a PC I will be able to call the other person, and the other person is able to see my number on their screen. Similarly, if a person calls me, I can pick up a call on my PC and can see their number on my screen. I don't have any idea how to implement this – how would I go about doing that?

  Read the article

• Can you get to a command line on the iPhone?

  - by Ethan

  I'm not even sure why I'd want to do this. I guess I'm just curious. Is there a way to get to some kind console, command line, or text-based UI on the iPhone? I'm referring to accessing the iPhone system itself, poking around in the directories, opening files in something akin to vi, that sort of thing.

  Read the article

• iproute2 premptive route creation, i think....

  - by Bryan Hunt

  Firstly: I know could do this the easy way with SSH but I want to learn how to route. I want to route packets back through the same tun0 interface from which they came into my system. I can do it for single routes. This works: sudo ip route add 74.52.23.120 metric 2 via 10.8.0.1 But i'd have to add them manually for each request that came down the pipe I've taken the blue pill and followed the http://lartc.org/howto/lartc.netfilter.html: Netfilter & iproute - marking packets tutorial But it's oriented towards redirecting OUTGOING packets based upon markers What I want is for a packet that comes in via tun0 not to be dropped which is what's happening right now, running scappy or suchlike to receive packets it doesn't seem to be receiving anything. Watching in wireshark I see the initial SYN packets coming in on the tun0 interface but that's as far as it gets without a static route as shown above. Am I nuts?

  Read the article

• Drobo-like linux file server - how do I do it?

  - by John Hunt

  I've been pondering for a long time about how I can set up a server which operates much like the Drobo storage thing. The reasons I don't actually want a drobo is because I've heard scare stories, plus I'd like to do this on the cheap. So ideally I'm looking for something like lvm so I can create a logical volume that spans many hard disks of varying sizes... obviously that only offers redundancy if I put the LV on a raid array (as far as I know..) I have however been reading about technologies such as Microsoft's drive extender which duplicates files at the filesystem level and makes sure that the mirrored files are on a different phyiscal disk.. does anyone know or recommend a filesystem or method like this as it'll hopefully make much better use of the space available than raid ever could. Performance isn't an issue, I'd just really like to make the most of the hard disks I have lying around whilst having a bit of redundancy incase a disk dies. I understand full well that this is no replacement for a backup, but I'll only be storing files of medium importance and using the nas itself as a backup of my main pc and other systems. Thanks in advance! I'm hoping zfs or btrfs or something can do something clever for me :)

  Read the article

• PhpMyAdmin import/export - strange character encoding issues.

  - by John Hunt

  Hello, I'm migrating a site to a new host, and there are a couple of databases on there. There's no SSH access so I'm stuck with phpmyadmin. The issue is that certain characters (namely just whitespace) seems to being corrupt on the new site (same html, and apache doesn't seem to be messing with any encodings - you can see the strange characters have changed when I use less on my linux machine after downloading a table dump from both servers.) The issue isn't as bad if I import into the new database as utf-8 - whitespace characters only have one funny A type symbol instead of two. I've been trying various combinations of character encoding etc to no avail. Exporting from: phpMyAdmin 2.6.2 MySQL 4.1.20 MySQL connection collation: utf8_general_ci MySQL charset: UTF-8 Unicode (utf8) Collation on tables and their fields is: latin1_swedish_ci Importing to: phpMyAdmin - 2.11.9.2 MySQL client version: 5.0.45 MySQL charset: UTF-8 Unicode (utf8) MySQL connection collation: utf8_general_ci The import sql has this kind of thing in it: ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=192 ; I get the impression this is actually a bug or something with mysqldump as nothing seems to work.. does anyone have any insight into this? Cheers, John.

  Read the article

• javaws not found

  - by Hunt

  i have a server which has centos installed in it , recently i have installed jdk 1.6 into it. when i try to run java command from shell its working perfectly fine but when i tried running javaws (which comes with the jdk 1.6 only ) it is showing me following error java is stored into /usr/java/jdk1.6.0_25 and path is set to /usr/bin/ when i type which java Java Web Start splash screen process exiting ... Bad installation: JAVAWS_HOME not set: No such file or directory

  Read the article

• How do MaxSpareServers work in Apache?

  - by John Hunt

  I've scoured the web but I can't find out what MaxSpareServers are in Apache MPM prefork.. The MaxSpareServers directive sets the desired maximum number of idle child server processes. An idle process is one which is not handling a request. If there are more than MaxSpareServers idle, then the parent process will kill off the excess processes. Great, but what causes a spareserver to be created? More importantly, when does a spare server go away? I understand that minspareservers are created gradually after the server is started.. How do maxspareservers relate to maxclients? Basically I'm at a bit of a loss on how best to configure Apache.. there's a lot of documentation out there but it isn't that clear. Thanks, John.

  Read the article

• Installing SSL certs with nginx on Amazon EC2

  - by Ethan

  I finally got a cert from an authority and am struggling to get things working. I've created the appropriate combined certificate (personal + intermediate + root) and nginx is pointing to it. I got an elastic IP and connected it to my EC2 instance. My DNS records point to that IP. But when I point the browser to the hostname, I get the standard "Connection Untrusted" bit, with ssl_error_bad_cert_domain. Port 443 is open - I can get to the site over https if I ignore the warning. Weird thing is, under technical details, it lists the domain I tried to access as valid! When I try and diagnose with ssl testing sites, they don't even detect a certificate! What am I missing here? domain is yanlj.coinculture.info. Note I've got coinculture.info running on a home server without a dedicated IP and have the same problem, but I'll be moving that to the same EC2 instance as soon as I figure this thing out. I thought the elastic IP would solve things but it hasn't

  Read the article

• OpenSSL error while running punjab

  - by Hunt

  i ran punjab - BOSH connection manager - using twistd -y punjab.tac command in my centos but i am getting following error Unhandled Error Traceback (most recent call last): File "/usr/local/lib/python2.7/site-packages/twisted/application/app.py", line 652, in run runApp(config) File "/usr/local/lib/python2.7/site-packages/twisted/scripts/twistd.py", line 23, in runApp _SomeApplicationRunner(config).run() File "/usr/local/lib/python2.7/site-packages/twisted/application/app.py", line 386, in run self.application = self.createOrGetApplication() File "/usr/local/lib/python2.7/site-packages/twisted/application/app.py", line 451, in createOrGetApplication application = getApplication(self.config, passphrase) --- <exception caught here> --- File "/usr/local/lib/python2.7/site-packages/twisted/application/app.py", line 462, in getApplication application = service.loadApplication(filename, style, passphrase) File "/usr/local/lib/python2.7/site-packages/twisted/application/service.py", line 405, in loadApplication application = sob.loadValueFromFile(filename, 'application', passphrase) File "/usr/local/lib/python2.7/site-packages/twisted/persisted/sob.py", line 210, in loadValueFromFile exec fileObj in d, d File "punjab.tac", line 39, in <module> '/etc/pki/tls/cert.pem', File "/usr/local/lib/python2.7/site-packages/twisted/internet/ssl.py", line 68, in __init__ self.cacheContext() File "/usr/local/lib/python2.7/site-packages/twisted/internet/ssl.py", line 78, in cacheContext ctx.use_privatekey_file(self.privateKeyFileName) OpenSSL.SSL.Error: [('x509 certificate routines', 'X509_check_private_key', 'key values mismatch')] Failed to load application: [('x509 certificate routines', 'X509_check_private_key', 'key values mismatch')] my configuration file of punjab is sslContext = ssl.DefaultOpenSSLContextFactory( '/etc/pki/tls/private/ca.key', '/etc/pki/tls/cert.pem', ) How can i resolve above error

  Read the article

• Inheriting file ownership on linux

  - by John Hunt

  We have an ongoing problem here at work. We have a lot of websites set up on shared hosts, our cms writes many files to these sites and allows users of the sites to upload files etc.. The problem is that when a user uploads a file on the site the owner of that file becomes the webserver and therefore prevents us being able to change permissions etc via FTP. There are a few work arounds, but really what we need is a way to set a sticky owner if that's possible on new files and directories that are created on the server. Eg, rather than php writing the file as user apache it takes on the owner of the parent directory. I'm not sure if this is possible (I've never seen it done.) Any ideas? We're obviously not going to get a login for apache to the server, and I doubt we could get into the apache group either. Perhaps we need a way of allowing apache to set at least the group of a file, that way we could set the group to our ftp user in php and set 664 and 775 for any files that are written? Cheers, John.

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >