Search Results

Search found 38261 results on 1531 pages for 'fan page'.

Page 2/1531 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Intel graphics driver installer, now the CPU fan is rarely quiet

  - by Space monkey

  I have an Optimus chipset: Intel HD 4000 (i7-3635QM CPU) Geforce 640m I don't care about the NVIDIA card, so I didn't try to install any proprietary drivers for it. So: I was having a choppy+high CPU experience with gnome-shell on Ubuntu 14.04. Only happened when I tried moving a window around quickly. I used the Intel graphics installer hoping that it will fix the problem. It did fix the problem, now there is no choppyness or high CPU when I move windows around. However, there is a new problem now: The fan is rarely quiet, doing barely anything at all will cause the fan to go into loud mode quickly. That happens despite the CPU usage being at just around 4%. This wasn't the case before installing Intel drivers. It would normally only do that if, for example, I'm installing packages or doing something that puts some stress on the CPU. I set all CPU cores to "powersave" using cpufreq-set, but nothing changed. Also on Windows, the fans are really quiet when I'm in powersave mode. I believe they completely shut off for most of the time. I remember the installer giving me a report at the end as to which packages it installed. Unfortunately, I didn't save the report and I don't know where it would have saved it if it did. Any ideas or similar experiences?

  Read the article

• CPU fan kicks in to full gear when i try to install ubuntu 12.10 or LTS

  - by Remi cook

  Whenever I try to install (DUAL BOOT WITH WINDOWS 7) both versions of Ubuntu desktop on my PC the CPU fan starts spinning so fast that I couldn't even go through the installation for fear of my CPU exploding. In windows 7, the temp reaches 25-30 idle and 30-45 under full load. I tried installing through Wubi and by burning it to USB drive. Both wield the same results. I would appreciate any help. I'm a complete noob so take it easy one me. Intel Core i5 2500 @ 3.30GHz 4.00 GB Dual-Channel DDR3 @ 668MHz (9-9-9-24) Motherboard ASUSTeK Computer INC. P8Z68-V LX (LGA1155) Graphics AMD Radeon HD 6850 (Sapphire/PCPartner)

  Read the article

• Uncontrolled Fan and Crash

  - by RobotbeatsHuman

  I don't have sensors to properly run lm-sensors. The computer will turn on but shortly there after all the fans in it will speed way up. It stays like this for a few minutes and then the computer shuts off. Tried resetting the BIO. Went to try installing a BIOs update but it wont stay on long enough for me to try that or to do a clean install. Could this be the motherboard dying? It's mainly the CPU fan that ends up going max. after a few minutes. I checked the PSU and It's a Dell Inspiron 580. If you need more system specs just le me know.

  Read the article

• HP Pavilion G6 1209 temperature higher than usual and fan working in 11.10

  - by vanjadjurdjevic

  Installing Ubuntu on this new machine i had various problems, so I asked around ask ubuntu for a solution. This is the latest one! :D When I start the pc it shows the temperature around 50-55. When I open chromium it shows 60+ (61,62,63). It even gets to 67-68 when multi-tasking 2 apps. The fan is working slightly louder than in windows 7. Talking about windows 7, the temperature is 45-50 when idle, 50-53 when working in browser. Im already loosing it with this machine. You can find specs here It says 'technishe daten' below the picture. Click that tab and you will reach the specs.

  Read the article

• Fan working non-stop on a Dell Inspiron 5110

  - by cankemik

  First of all i'm new at ubuntu. I've only tried 11.10 before 12.04. Since then my notebook's(Dell Insprion 5110) fan was working non-stop. And also battery lasts in 2 hours. So i made a research. Some said it's about graphics card driver. I've tried so many things, so many codes but i get no result. I must say that i've tried ironhide and bumblebee. non of them worked 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev ff)

  Read the article

• How to add in in appendix page numbers separately from the regular heading page numbers

  - by O_O

  I had regular page numbers on my Microsoft Word 2007 document at the bottom center of my page, starting from 1 from Insert tab Page Number Bottom of page Plain Number 2. I added an appendix with Heading 6 and followed the instructions from http://support.microsoft.com/kb/290953 to create separate page numbers just for the appendix, i.e. A-1, A-2, B-1, B-2, etc. The Page Number Format configuration I did is here: ]When I try to set this however, it changes all of the page numbers to this format, even the ones that aren't from heading 6 (meaning it changes the non-appendix content to this page number format). Here's another example: 1 Heading1 has page number A-4 (note it starts at A-1 at the title page) ... Appendix A has page number A-12 I would like to change it so that 1 Heading1 has page number 4 (note it starts at 1 at the title page) ... Appendix A has page number A-1 Anyone know why this is happening? Thank you!!

  Read the article

• ATI / AMD HIS HD 7870 Graphics card fan speed below 16% / 20% 26%

  - by Thorsten Niehues

  I bought a AMD / ATI HIS HD 7870 to replace my old HD 4870. I noticed that the fan speed does not scale with the temperature: The fan speed does not get below 28% (read from catalyst / automatic fan speed) If I manually change it in the catalyst to 20% then it has the same speed than 28% : about 900-1000 rpm. With HIS iTurbo i manually can change the fan speed below 20%. But I noticed that changing the fan speed below 16% results in 3200 rpm. This is really stupid and annoying since my PC is a ultra silent PC and all fans are running with about 500 rpm when the PC is idle (windows / musik movies, etc.) Is there any way to change the fan speed to a reasonable speed like 500 rpm by software or hardware adapters (I really don't like to put a poti between the 12V line)

  Read the article

• 3 wire computer fan won't run continuously

  - by Ben

  I had an old computer that didn't work anymore, so I took the CPU fan out to see what I could make with it. The fan is NMB model number BG0903-B044-VTL, like this. It has three wires coming off of it, red, black, and white. I know that the white wire is usually a speed sensor. Does this wire need to be connected to something in order for the fan to run continuously? Right now when I apply power to the red and black wires (from a 9-volt battery) the fan will spin very briefly, and then slow down until it stops. The fan's motor only spins in the instant that the power is turned on, but doesn't continue, even though the power is still applied. How can I get the fan to spin continuously?

  Read the article

• Enable CPU fan always on

  - by Gundars Meness

  I am using 3 years old overheating laptop and I want my CPU fan to be spinning 24/7 regardless of the consequences. How to make it spin? The problem is that CPU & GPU heats up to 68°C (154 F) right after boot and never goes down, because CPU fan is not spinning full throttle. It starts spinning faster when temperature goes over 70°C and stops when it reaches seventy again. When doing heavy work on databases, it gets from 70 to 90 in no-time and automatically powers off. Bios does not contain any "fan spin 100%" options, just "spin slowly all the time" and "auto" which is more useless than the first one since my fan doesn't have pwm wire. Currently I'm solving this with cooling stand (3x5V), but it isn't much of a help. I would rather use the CPU fan since it is the only fan directly responsible for cooling down CPU/GPU. But how to make it spin 100% all the time? Should I attach it's red power wire to motherboard to get constant 5V (is there such option?), or is there an option to control it via software? Laptop: Samsung R528 2.3 GHz Intel i3 with Nvidia GeForce 310M Bios: Phoenix 03KT.M003.20100622.KSJ (and that is latest update) OS: Ubuntu 12.04.2 LTS with 3.2.0.51 kernel CPU fan: Image/Description Has 5V 0,4A and only 3 pins, no pwm. P.S. Yes, I did clean everything with alcohol, freed the air vents, changed thermal paste etc; that reduced temperature by 4 degrees.

  Read the article

• ACER ASPIRE V3-571G-9435 Fan not kicking in leading to overclocking

  - by brythespy

  This laptop has always had this problem. The temperatures kick up to the thermal ceiling of 99C for the CPU (i7-3610QM) and 94C for the GPU (GT 640M). Problem is, the FAN doesn't give a damn. It's actually QUIETER when the temperatures are that high, than when it's at 60C or so. I figured it was a problem with the BIOS, so I updated that, no change. So maybe it was a problem with windows? Nope, same result on gaming with Ubuntu. The major problem of this, is that after gaming for ten minutes the CPU throttles itself to 1197MHz(as opposed to 3193), and the GPU goes down to 135MHz( as opposed to 843MHz). The problem is that the fan won't kick in like I know it can, because when the laptop is in POST, like at BIOS setup, the fan is like a vacuum cleaner it's so loud! I don't really care about noise, so I'd love to have the fan like that all the time as long as the temperatures don't fly through the roof... So, things I've tried so far, to avoid possible duplicate answers. Checked for dust: It's been this way since the laptop was new, and I've since then taken it apart. No dust buildup. Background stuff running?: No, problem persists across OS'es, and it happens while gaming anyways Manually underclocking both CPU/GPU: Using windows, I can force the CPU to stay at 1.1GHz, but the temperature STILL easily hits 99C after 5 min of gaming Contacted Acer support?: No help at all. They told me to update and reset the BIOS, which I have done multiple times. There are only about 6 changeable things anyway, none of which should affect the FAN control Third party fan control program?: None detect the fan So, I'm screwed until I can afford to replace this laptop, but I am very satisfied with performance in games... Whenever the CPU/GPU aren't being throttled. Anyone that can offer advice to solve this problem would be greatly appreciated. Hell, if you solved my problem I'd send you some monies through paypal.

  Read the article

• Sony Vaio CPU fan runs at full speed after installing Windows 8.1 preview

  - by greg27

  I installed the Windows 8.1 preview on my Sony Vaio E Series 14P (http://www.sony.com.au/product/sve14a27cg) and now my CPU fan is running at full speed all the time. When I first start my computer it runs normally, but a few seconds after reaching the Windows login screen the fan speed will suddenly jump up to max. It's pretty loud, so I'm hoping there's a solution! I've tried updating my bios to the latest version but that didn't help. I've tried programs like SpeedFan, but that wasn't able to detect my CPU fan at all. My CPU usage and temperature is normal and doesn't warrant the max fan speed. Someone else has reported the issue here: http://answers.microsoft.com/en-us/windows/forum/windows8_1_pr-hardware/sony-vaio-e-series-sve14a35cxh100-fan-throttle/45ec823a-2bc8-43ea-8557-b1a5dd0a6870 Is there any way to fix this without having to refresh/reinstall Windows?

  Read the article

• How do I get fan control working?

  - by RobinJ

  I know there something called fancontrol, that enables you to control the speed of your system's ventilation. I'd like to let my fans spin a bit faster as my laptop is heating up very easilly. All tutorials and stuff I've found are for old versions of Ubuntu and don't seem to be working anymore. Can anyone explain to me or give me a good link on how I can get it working on Ubuntu? Something different with the same effect is also fine.

  Read the article

• Laptop CPU fan not working properly

  - by Smith

  My laptop's CPU fan is suddenly acting very bizarre, and I am at a loss for what to do so I am asking for some help. Specifically, the fan is not even starting to spin until the CPU reaches 60 degrees Celsius (checked through HWmonitor). Once it is on, however, it properly stays on even when the CPU gets back to idle temps around 38 Celsius. Before, the fan was simply starting with the computer and staying on like normal. I've checked this for consistency both by allowing cold boots to ramp up temperature to 60 Celsius (the slow climb also causing the laptop to become unreasonably warm near the heatsink), and also running Prime95 immediately to kickstart the fan (this works every time). The fan seems to be stationary when turning the computer on from either sleep or shutdown. The fan will start at POST very briefly, and then stop completely. I've checked the BIOS for a SmartFan setting but haven't found any. I've opened the case to check for dust or debris and have not found anything (I applied some canned air to the area just in case). The laptop is a Lenovo ThinkPad Edge E430 and the CPU is an Intel Core i5 3210m @ 2.5 GHz. Any advice would really be appreciated.

  Read the article

• Ubuntu 9.0.4 Presario S4000NX Fan Speed

  - by Chris C

  I recently install Ubuntu 9.0.4 on a Presario S4000NX and the CPU fan speed is kept at max. With Windows XP installed the fan speed would increase/decrease as required. I've tried to install lm-sensors and run the sensors-detect. It recommended that I load the modules which I did: smsc47m192 i2c-i801 When running sensor-detect it gave me this strange message: Trying family SMSC Found SMSC LPC47M15x/192/997 Super IO Fan Sensors (but not activated) Running the sensors command gives me a list of voltages and CPU and temperature but doesn't list any fans. After doing some Internet research I then tried to load the smsc47m1 module but I get the following error: FATAL: Error inserting smsc47m1 (/lib/modules/2.6.28-15-generic/kernel/drivers/hwmon/smsc47m1.ko): no such device The file smsc47m1.ko does exist in the listed folder. Any suggestions for getting the fan speed (and the noise) down in Ubuntu? Thanx. - Chris P.S. - I would have put better tags but Server Fault wouldn't let me.

  Read the article

• Low CPU usage but High fan speed

  - by dhasu

  The problem I am facing is the CPU fan rotates with high speed even though the CPU usage is very low, less than 10%. I even cleaned the Dust off the Fan, I replaced the Thermal Material on the Processor. Installed an Extra Fan. Nothing seems to Work. Please Help.

  Read the article

• Notebook fan spinning at max after trying Linux

  - by Igor Kulman

  I have a Thinkpad T420 (4178-BSG) I use with Windows. The fan (cpu) was always very quiet and I was completely satisfied with it. A few days ago I booted Backtrack Linux from a flashdrive and the fan started to spin at maximum and was very loud. The problem is that this state persists. When I start the Thinkpad and boot Windows as usual the fan start spining at max and never stops. It drives me mad. It looks like somehow the Linux change some settings and I have to suffer. I tried reseting BIOS, updating BIOS, nothing helpes. I even removed the keyboard, looked at the fan but there is no dust.

  Read the article

• Adding extra fan on my setup. please advice on proper Exhaust or Intake of Fan.

  - by Pennf0lio

  Hi, I modify my Computer case so that I can add more computer fan to make my computer cool this summer. I would need your thoughts how I can improve my idea and I'm open to all of your advices. Status: Fan Position (The blue circles are the fan's location) At the side I have to intake blowing fresh air at the motherboard and at the top and back I have Exhaust fan blowing out hot air. The computer fans will be powered by 12v adapter (recycled) so that my power supply wouldn't be overloaded. I need a practical advice, I don't want to spend to much on this. Thanks.

  Read the article

• High fan speed after return from suspend (on Ubuntu)

  - by Bolo

  Hi, I've got a HP ProBook 5310m laptop with Ubuntu 10.04 (32 bit). When I return from suspend, the fan speed is usually very high: FDTZ sensor reports "90 °C". Yes, the units are wrong, since FDTZ does not report temperature, but fan speed – that's probably just a small bug in reporting. Interestingly, when I plug or unplug the power cable for a moment, the fan speed returns back to normal. My questions: Where can I report this problem? Is it about ACPI support in the kernel? What is the address of the relevant bug tracker? As a workaround for now, how can I programmatically trigger a behavior equivalent to (un)plugging the power cable. More generally, how can I force ACPI to recalculate fan speed? Ideally, I'm looking for something like echo foo > /proc/bar. Thanks in advance!

  Read the article

• Compaq Motherboard gives "CPU Fan Error"

  - by John

  I have a motherboard for a HP business desktop dx5150 PC. The model written on the board is "MS-7050" and it is for an AMD socket 939 processor. I got everything installed in it, and when I turned it on, it showed a message stating that there was a "CPU Fan Error" (or some similar language) and then turned off. It never stays on for more than about 30 seconds, probably less. The fan had previously been working great, but I replaced it anyway with a brand new Cooler Master fan. This did not work. I then reset the BIOS with the jumpers on the board, no dice. I replaced the CMOS battery. Same error. I then replaced the entire computer power supply with a brand new Antec, same error. The fan header is keyed, and has room for 3 pins. The CPU fan is designed the same way, so its not that I'm missing a temperature sensor or anything. Can anyone give some suggestions? Especially maybe some secret keystrokes to bypass this error?

  Read the article

• How to Omit the Page Number From the First Page of a Word 2013 Document Without Using Sections

  - by Lori Kaufman

  Normally, the first page, or cover page, of a document does not have a page number or other header or footer text. You can avoid putting a page number on the first page using sections, but there is an easier way to do this. If you don’t plan to use sections in any other part of your document, you may want to avoid using them completely. We will show you how to easily take the page number off the cover page and start the page numbering at one on the second page of your document by simply using a footer (or a header) and changing one setting. Click the Page Layout tab. In the Page Setup section of the Page Layout tab, click the Page Setup dialog box launcher icon in the lower, right corner of the section. On the Page Setup dialog box, click the Layout tab and select the Different first page check box in the Headers and footers section so there is a check mark in the box. Click OK. You’ll notice there is no page number on the first page of your document now. However, you might want the second page to be page one of your document, only to find it is currently page two. To change the page number on the second page to one, click the Insert tab. In the Header & Footer section of the Insert tab, click Page Number and select Format Page Numbers from the drop-down menu. On the Page Number Format dialog box, select Start at in the Page numbering section. Enter 0 in the edit box and click OK. This allows the second page of your document to be labeled as page one. You can use the drop-down menu on the Format Page Numbers button in the Header & Footer section of the Insert tab to add page numbers to your document as well. Easily insert formatted page numbers at the top or bottom of the page or in the page margins. Use the same menu to remove page numbers from your document.     

  Read the article

• Speed Fan - low fan speed can burn cpu ?

  - by asdasd

  As i can see, with this software you can set the fan speed. So, if you set it to low, theCPU temperature will grow really high and it can burn in likely 1 hour - is this possible or not and why ? Thanks.

  Read the article

• Why is my CPU fan so loud?

  - by tiiquu

  I bought an old PC to use as a second PC. Everything is fine, except for one thing. The CPU fan is terribly loud! I did a lot with PCs but I never did much with CPU fans. If I want to replace it, what do I have to look for? The fan is 8cm long on each side and 11cm diameter. It is just clipped to the cooler. The PC is a P4 3 GHz. I don't want to spend much money, as I only paid 50 euro for the whole PC. I would prefer to buy a fan for 1-3 dollar or something at eBay but I am not quite sure which one I should buy (which fits). Can you advise?

  Read the article

• How to control fan speed using SpeedFan?

  - by John Young

  The CPU fan in my laptop is running too fast. I wish to control the speed manually to my preference, at times. Here is a CPU-Z screenshot of my laptop configuration: http://i.stack.imgur.com/1oST1.png And here is how SpeedFan window looks at my end: http://i.imgur.com/BIi0RdJ.jpg I have no idea how to use SpeedFan to control my laptop's CPU fan speed. How to configure it so that I can increase and decrease speed of the fan at my will? Edit: Sorry, the first image wasn't as intended, so I've corrected it now. Also, if someone can edit the post and embed the images in the post, that would be great. I need at least 10 reputation to successfully accomplish that.

  Read the article

• Coolbits not working

  - by usk

  I want to use coolbits to increase fan speed of my Fermi GPU. 280.13 driver installed. Ubuntu 11.10 I edited /etc/X11/xorg.conf as follows, by pressing Alt+F2 and gksu gedit /etc/X11/xorg.conf I get Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 470" Option "NoLogo" "True" Option "Coolbits" "4" EndSection Started getting these messages, Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap" So I did this, sudo aptitude install gtk2-engines-pixbuf terminal, a@z:~$ nvidia-settings -a [gpu:0]/GPUFanControlState=1 a@z:~$ nvidia-settings -q fans 1 Fan on z:0 [0] z:0[fan:0] (Fan 0) a@z:~$ nvidia-settings -a [fan:0]/GPUCurrentFanSpeed=80 ERROR: Error assigning value 80 to attribute 'GPUCurrentFanSpeed' (z:0[fan:0]) as specified in assignment '[fan:0]/GPUCurrentFanSpeed=80' (Unknown Error). So, it's not working; I can't enter the fan speed percentage. Also from NVidia X Server, there are no fan controls. http://en.gentoo-wiki.com/wiki/Nvidia#Manual_Fan_Control_for_nVIDIA_Settings

  Read the article

• Fan speed monitor Software for Macbook Pro Unibody on Windows

  - by dtmunir

  I've tried multiple temperature monitor and fan speed software on my Macbook Pro Unibody under Windows 7 64-bit RC. None of them can report the fan speed. Currently I'm using SpeedFan which reports the CPU temperature of each of the two cores, but is not able to detect or interface with the Fans. Has anyone had any luck with this?

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >