Search Results

Search found 31 results on 2 pages for 'gsa'.

Page 2/2 | < Previous Page | 1 2 

• Can't mount Linux usd disk. It just create /dev/sg device but no /dev/sd

  - by MTilsted

  I have a Corsair R60 ssd disk which is a disk with both sata and usb connectors. But the usb thing seems to be a bit non-standard, or maybe its just my fedora linux. When I insert the disk using a usb cabel to a running Fedora 14 linux system, a device called /dev/sg3 is added but that is all. No new /dev/sd* device is created so I can't mount the disk. If I look at cat /proc/scsi/sg/device_strs I get ATA Hitachi HTS54321 FB2O HL-DT-ST DVDRAM GSA-T50N RP05 Seagate Desktop 0130 Corsair CSSD-R60GB2 So the disk is there. (The last entry) but my linux will for some reason not see it as a usb hard disk. When I insert other usb disks they work fine. It is only this specific disk which causes problems. I have tried on 3 different computers with the same result. A hint to the problem may be that if I add the disk to a windows system(With usb) the disk is called "A fixed disk" and not a portable disk as expected. The disk works fine with linux If i connect it with the sata cabel, but I would really like to have it working with usb too. (To mount it on computers without sata).

  Read the article

• Can't mount Linux usb disk. It just create /dev/sg device but no /dev/sd

  - by MTilsted

  I have a Corsair R60 ssd disk which is a disk with both sata and usb connectors. But the usb thing seems to be a bit non-standard, or maybe its just my fedora linux. When I insert the disk using a usb cabel to a running Fedora 14 linux system, a device called /dev/sg3 is added but that is all. No new /dev/sd* device is created so I can't mount the disk. If I look at cat /proc/scsi/sg/device_strs I get ATA Hitachi HTS54321 FB2O HL-DT-ST DVDRAM GSA-T50N RP05 Seagate Desktop 0130 Corsair CSSD-R60GB2 So the disk is there. (The last entry) but my linux will for some reason not see it as a usb hard disk. When I insert other usb disks they work fine. It is only this specific disk which causes problems. I have tried on 3 different computers with the same result. A hint to the problem may be that if I add the disk to a windows system(With usb) the disk is called "A fixed disk" and not a portable disk as expected. The disk works fine with linux If i connect it with the sata cabel, but I would really like to have it working with usb too. (To mount it on computers without sata). Added: I did try to mount /dev/sg3 but mount say that its not a block device. (File say Its a character special device). Added output from dmesg: [ 97.454073] usb 7-1: USB disconnect, address 2 [ 105.913055] hub 2-0:1.0: unable to enumerate USB device on port 3 [ 107.048054] usb 2-3: new high speed USB device using ehci_hcd and address 5 [ 107.162900] usb 2-3: New USB device found, idVendor=1b1c, idProduct=1ab8 [ 107.162903] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 107.162906] usb 2-3: Product: CSSD-R60GB2 [ 107.162908] usb 2-3: Manufacturer: Corsair [ 107.162910] usb 2-3: SerialNumber: 10111441000000990069 [ 107.167651] scsi7 : usb-storage 2-3:1.0 [ 108.195543] scsi 7:0:0:0: Direct-Access Corsair CSSD-R60GB2 PQ: 1 ANSI: 0 [ 108.197732] scsi 7:0:0:0: Attached scsi generic sg3 type 0

  Read the article

• Webcast Q&A: ResCare Solves Content Lifecycle Challenges with Oracle WebCenter

  - by Kellsey Ruppel

  Last week we had the fourth webcast in our WebCenter in Action webcast series, "ResCare Solves Content Lifecycle Challenges with Oracle WebCenter", where customer Joe Lichtefeld from ResCare and Wayne Boerger & Doug Thompson from Oracle Partner TEAM Informatics shared how Oracle WebCenter is powering allowing ResCare to solve content lifecycle challenges, reduce compliance and business risks, and increase adoption of intranet as primary business communication tool In case you missed it, here's a recap of the Q&A.   Joe Lichtefeld, ResCare  Q: Did you run into any issues in the deployment of the platform?A: We experienced very few issues when implementing the content management and search functionalities. There were some challenges in determining the metadata structure. We tried to find a fine balance between having enough fields to provide the functionality needed, but trying to limit the impact to the contributing members.  Q: What has been the biggest benefit your end users have seen?A: The biggest benefit to date is two-fold. Content on the intranet can be maintained by the individual contributors more timely than in our old process of all requests being updated by IT. The other big benefit is the ability to find the most current version of a document instead of relying on emails and phone calls to track down the "current" version. Q: Was there any resistance internally when implementing the solution? If so, how did you overcome that?A: We experienced very little resistance. Most of our community groups were eager to be able to contribute and maintain their information. We had the normal hurdles of training and follow-up training with implementing a new system and process. As our second phase rolled out access to all employees, we have received more positive feedback on the accessibility of information. Wayne Boerger & Doug Thompson, TEAM Informatics Q: Can you integrate multiple repositories with the Google Search Appliance? Yes, the Google Search Appliance is designed to index lots of different repositories, from both public and internal sources. There are included connectors to many repositories, such as SharePoint, databases, file systems, LDAP, and with the TEAM GSA Connector and the Oracle Content Server. And the index for these repositories can be configured into different collections depending on the use cases that each customer has, and really, for each need within a customer environment. Q: How many different filters can you add when the search results are returned? A: Presuming this question is about the filtering on the search results. You can add as many filters as you like and it can be done by collection or any number of other criteria. Most importantly, customers now have the ability to limit the returned content by a set metadata value. Q: With the TEAM Sites Connector, what types of content can you sync? A: There’s really no limit; if it can be checked into the content server, then it is eligible for sync into Sites.  So basically, any digital file that has relevance to a Sites implementation can be checked into the WC Content central repository and then the connector can/will manage it. Q: Using the Connector, are there any limitations around where in Sites that synced content can be used? A: There are no limitations about where it can be used. When setting up your environment to use it, you just need to think through the different destinations on the Sites side that might use the content; that way you’ve got the right information to create the rules needed for the connector. If you missed the webcast, be sure to catch the replay to see a live demonstration of WebCenter in action!  ResCare Solves Content Lifecycle Challenges with Oracle WebCenter from Oracle WebCenter

  Read the article

• DVD Drive Failing on Windows 7

  - by Seth Spearman

  Hello, I have x64 Windows 7 running on an ASUS M50VM. The DVD drive works completely unreliably if not at all. But the story is not that simple so bear with me...here are the gory details. When I first got the machine it came with Windows XP and I upgraded it to Windows Vista X64 and the DVD worked fine. When Windows 7 RC2 came out I tried it on a Virtual Machine and I liked it so much that I upgraded the machine to Win7 RC1. The DVD worked fine. Of course, RC1 was going to start spontaneously rebooting, so when Windows 7 was released I DID A CLEAN INSTALL of Windows 7. Just to clarify...by clean install I mean I did a FORMAT of the HARD DRIVE and INSTALLED it from scratch. EVER since then the DVD mostly doesn't work. I can sometime read from disk but that will often hang. (Please see my description below of HANG for details.) CD or DVD writes ALWAYS fail with a HANG (I have done a successful write only one time.) Here is what I mean by HANG... *Explorer Window is unresponsive. *Any software accessing the DVD drive is unresponsive. *The DVD tray will not eject. *Using a paper clip will eject but the disk is usually spinning real hard. *Attempting to shut down windows will fail. I have waited as long as ten minutes but the whole OS seems to hang. I do a hard shutdown. *Sometimes accessing the DVD (when it does not cause a HANG) will still fail and the device will actually seem to disappear from the system until I reboot. A couple of other things. It is NOT a hardware failure. It is the Windows OS. I know this because I swapped out my DVD drive with a friend with the same model...his machine is fine (he is still running Vista X64) and my machine still fails. For what it is worth. I swapped out my primary disk with the INTEL 160GB SSD. EDIT Here is what System Information shows about my DVD drive Drive D: Description CD-ROM Drive Media Loaded No Media Type DVD Writer Name HL-DT-ST DVDRAM GSA-T50N ATA Device Manufacturer (Standard CD-ROM drives) Status OK Transfer Rate -1.00 kbytes/sec SCSI Target ID 0 PNP Device ID IDE\CDROMHL-DT-ST_DVDRAM_GSA-T50N________________RR04____\5&2B5B7F1D&0&1.0.0 Driver c:\windows\system32\drivers\cdrom.sys (6.1.7600.16385, 144.00 KB (147,456 bytes), 7/13/2009 7:19 PM) Any ideas? HELP! Seth B Spearman

  Read the article

• DVD Drive Failing on Windows 7

  - by Seth Spearman

  I have x64 Windows 7 running on an ASUS M50VM. The DVD drive works completely unreliably if not at all. But the story is not that simple so bear with me...here are the gory details. When I first got the machine it came with Windows XP and I upgraded it to Windows Vista X64 and the DVD worked fine. When Windows 7 RC2 came out I tried it on a Virtual Machine and I liked it so much that I upgraded the machine to Win7 RC1. The DVD worked fine. Of course, RC1 was going to start spontaneously rebooting, so when Windows 7 was released I DID A CLEAN INSTALL of Windows 7. Just to clarify...by clean install I mean I did a FORMAT of the HARD DRIVE and INSTALLED it from scratch. EVER since then the DVD mostly doesn't work. I can sometime read from disk but that will often hang. (Please see my description below of HANG for details.) CD or DVD writes ALWAYS fail with a HANG (I have done a successful write only one time.) Here is what I mean by HANG... *Explorer Window is unresponsive. *Any software accessing the DVD drive is unresponsive. *The DVD tray will not eject. *Using a paper clip will eject but the disk is usually spinning real hard. *Attempting to shut down windows will fail. I have waited as long as ten minutes but the whole OS seems to hang. I do a hard shutdown. *Sometimes accessing the DVD (when it does not cause a HANG) will still fail and the device will actually seem to disappear from the system until I reboot. A couple of other things. It is NOT a hardware failure. It is the Windows OS. I know this because I swapped out my DVD drive with a friend with the same model...his machine is fine (he is still running Vista X64) and my machine still fails. For what it is worth. I swapped out my primary disk with the INTEL 160GB SSD. EDIT Here is what System Information shows about my DVD drive Drive D: Description CD-ROM Drive Media Loaded No Media Type DVD Writer Name HL-DT-ST DVDRAM GSA-T50N ATA Device Manufacturer (Standard CD-ROM drives) Status OK Transfer Rate -1.00 kbytes/sec SCSI Target ID 0 PNP Device ID IDE\CDROMHL-DT-ST_DVDRAM_GSA-T50N________________RR04____\5&2B5B7F1D&0&1.0.0 Driver c:\windows\system32\drivers\cdrom.sys (6.1.7600.16385, 144.00 KB (147,456 bytes), 7/13/2009 7:19 PM) Any ideas? HELP! Seth B Spearman

  Read the article

• SerialPort ReadLine() after Thread.Sleep() goes crazy

  - by Mat

  Hi everybody, I've been fighting with this issue for a day and I can't find answer for it. I am trying to read data from GPS device trough COM port in Compact Framework C#. I am using SerialPort class (actually my own ComPort class boxing SerialPort, but it adds only two fields I need, nothing special). Anyway.. I am running while loop in a separate thread which reads line from the port, analyze NMEA data, print them, catch all exceptions and then I Sleep(200) the thread, cause I need CPU for other threads... Without Sleep it works fine, but uses 100% CPU.. When I dont use Sleep after few minutes the output from COM port looks like this: GPGSA,A,3,09,12,22,17,15,27,,,,,,,2.6,1.6,2.1*3F GSA,A,3,09,12,22,17,15,27,,,,,,,2.6,1.6,2.1*3F A,A,3,09,12,22,17,15,27,,,,,,,2.6,1.6,2.1*3F ,18,12,271,24,24,05,020,24,14,04,326,25,11,03,023,*76 A,3,09,12,22,17,15,27,,,,,,,2.6,1.6,2.1*3F 3,09,12,22,17,15,27,,,,,,,2.6,1.6,2.1*3F 09,12,22,17,15,27,,,,,,,2.6,1.6,2.1*3F ,12,22,17,15,27,,,,,,,2.6,1.6,2.1*3F as you can see the same message is read few times but cut. I wonder what I'm doing wrong... My port configuration: port.ReadBufferSize = 4096; port.BaudRate = 4800; port.DataBits = 8; port.Parity = Parity.None; port.StopBits = StopBits.One; port.NewLine = "\r\n"; port.ReadTimeout = 1000; port.ReceivedBytesThreshold = 100000; And my reading function: private void processGps(){ while (!closing) { //reconnect if needed try { string sentence = port.ReadLine(); //here print the sentence //analyze the sentence (this takes some time 50-100ms) } catch (TimeoutException) { Thread.Sleep(0); } catch (IOException ioex) { //handling IO exception (some info on the screen) } Thread.Sleep(200); } } There is some more stuff in this function like reconnection if the device is lost etc.. but it is not called when the GPS is connected properly.. I was trying port.DiscardInBuffer(); after some blocks of code (in TimeoutException, after read..) Did anyone had similar problem? I really dont know what I'm doing wrong.. The only way to get rig of it is removing the last Sleep... Thanks in advance! Best Regards, Mat

  Read the article

< Previous Page | 1 2