Search Results

Search found 53 results on 3 pages for 'kristopher'.

Page 2/3 | < Previous Page | 1 2 3  | Next Page >

  • Making php-mode Compatible with Emacs 23

    - by Kristopher Johnson
    I am using Emacs 23 and php-mode.el 1.5.0. When I have this in my .emacs: (require 'php-mode) I get this error message when Emacs starts: Warning (initialization): An error occurred while loading `/Users/kdj/.emacs': error: `c-lang-defconst' must be used in a file To ensure normal operation, you should investigate and remove the cause of the error in your initialization file. Start Emacs with the `--debug-init' option to view a complete error backtrace. If I evaluate (require 'php-mode) after Emacs starts, I don't get any error messages. I found a blog entry which indicates that this problem is specific to Emacs 23 (that is, there is no error with Emacs 22.x), but it doesn't give any solutions. Don't know if this matters, but I'm using Mac OS X, and I built Emacs from the current CVS sources, using ./configure --with-ns. Anybody know what's going on here, and/or how I can fix it?

    Read the article

  • imap_open() says "invalid remote specification" and fails to connect

    - by Kristopher Ives
    When I try to use imap_open I get the following error: Warning: imap_open() [function.imap-open]: Couldn't open stream {mail.domain.com:110/pop3/novalidate-cert/} in /path/to/mailbox.php on line 5 Can't open mailbox {mail.domain.com:110/pop3/novalidate-cert/}: invalid remote specification My phpinfo says that I have: IMAP c-Client Version 2007e SSL Support enabled Kerberos Support enabled On another server that gives the same phpinfo for imap it works, although that version is 2006. PHP says it was compiled with the following settings: './configure' '--disable-path-info-check' '--enable-exif' '--enable-fastcgi' '--enable-ftp' '--enable-gd-native-ttf' '--enable-libxml' '--enable-mbstring' '--enable-pdo=shared' '--enable-soap' '--enable-sockets' '--enable-zip' '--prefix=/usr' '--with-bz2' '--with-curl=/opt/curlssl/' '--with-freetype-dir=/usr' '--with-gd' '--with-gettext' '--with-imap=/opt/php_with_imap_client/' '--with-imap-ssl=/usr' '--with-jpeg-dir=/usr' '--with-kerberos' '--with-libexpat-dir=/usr' '--with-libxml-dir=/opt/xml2' '--with-libxml-dir=/opt/xml2/' '--with-mysql=/usr' '--with-mysql-sock=/var/lib/mysql/mysql.sock' '--with-mysqli=/usr/bin/mysql_config' '--with-openssl=/usr' '--with-openssl-dir=/usr' '--with-pdo-mysql=shared' '--with-pdo-sqlite=shared' '--with-pgsql=/usr' '--with-png-dir=/usr' '--with-sqlite=shared' '--with-ttf' '--with-xpm-dir=/usr' '--with-zlib' '--with-zlib-dir=/usr'

    Read the article

  • Can iPad/iPhone Touch Points be Wrong Due to Calibration?

    - by Kristopher Johnson
    I have an iPad application that uses the whole screen (that is, UIStatusBarHidden is set true in the Info.plist file). The main window's frame is set to (0, 0, 768, 1024), as is the main view in that frame. The main view has multitouch enabled. The view has code to handle touches: - (void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event { for (UITouch *touch in touches) { CGPoint location = [touch locationInView:nil]; NSLog(@"touchesMoved at location %@", NSStringFromCGPoint(location)); } } When I run the app in the simulator, it works pretty much as expected. As I move the mouse from one edge of the screen to the other, reported X values go from 0 to 767. Reported Y values go from 20 to 1023, but it is a known issue that the simulator doesn't report touches in the top 20 pixels of the screen, even when there is no status bar. Here's what's weird: When I run the app on an actual iPad, the X values go from 0 to 767 as expected, but reported Y values go from -6 to 1017. The fact that it seems to work properly on the simulator leads me to suspect that real devices' touchscreens are not perfectly calibrated, and mine is simply reporting values six pixels too low. Can anyone verify that this is the case? Otherwise, is there anything else that could account for the Y values being six pixels off from what I expect? (In a few days, I should have a second iPad, so I can test this with another device and compare the results.)

    Read the article

  • How can I untar a sub directory?

    - by Kristopher Ives
    Suppose I have a tar that contains: / # Root directory /level1/ # A sub directory /level1/a.file /level1/b.file /level1/... # The rest How can I do something like tar -xf that would untar the contents level1/ like this: /a.file /b.file /... # The rest

    Read the article

  • Sync Algorithms

    - by Kristopher Johnson
    Are there any good references out there for sync algorithms? I'm interested in algorithms that synchronize the following kinds of data between multiple users: calendars documents lists and outlines I'm not just looking for synchronization of contents of directories a la rsync; I am interested in merging the data within individual files.

    Read the article

  • Get the last N rows in the database in order?

    - by Kristopher
    Let's say I have the following database table: record_id | record_date | record_value -----------+-------------+-------------- 1 | 2010-05-01 | 195.00 2 | 2010-07-01 | 185.00 3 | 2010-09-01 | 175.00 4 | 2010-05-01 | 189.00 5 | 2010-06-01 | 185.00 6 | 2010-07-01 | 180.00 7 | 2010-08-01 | 175.00 8 | 2010-09-01 | 170.00 9 | 2010-10-01 | 165.00 I want to grab the last 5 rows with the data ordered by record_date ASC. This is easy to do with: SELECT * FROM mytable ORDER BY record_date ASC LIMIT 5 OFFSET 4 Which would give me: record_id | record_date | record_value -----------+-------------+-------------- 6 | 2010-07-01 | 180.00 7 | 2010-08-01 | 175.00 3 | 2010-09-01 | 175.00 8 | 2010-09-01 | 170.00 9 | 2010-10-01 | 165.00 But how do I do this when I don't know how many records there are and can't compute the magic number of 4? I've tried this query, but if there are less than 5 records, it results in a negative OFFSET, which is invalid: SELECT * FROM mytable ORDER BY record_date ASC LIMIT 5 OFFSET (SELECT COUNT(*) FROM mytable) - 5; So how do I accomplish this?

    Read the article

  • Do You Really Know Your Programming Languages?

    - by Kristopher Johnson
    I am often amazed at how little some of my colleagues know or care about their craft. Something that constantly frustrates me is that people don't want to learn any more than they need to about the programming languages they use every day. Many programmers seem content to learn some pidgin sub-dialect, and stick with that. If they see a keyword or construct that they aren't familiar with, they'll complain that the code is "tricky." What would you think of a civil engineer who shied away from calculus because it had "all those tricky math symbols?" I'm not suggesting that we all need to become "language lawyers." But if you make your living as a programmer, and claim to be a competent user of language X, then I think at a minimum you should know the following: Do you know the keywords of the language and what they do? What are the valid syntactic forms? How are memory, files, and other operating system resources managed? Where is the official language specification and library reference for the language? The last one is the one that really gets me. Many programmers seem to have no idea that there is a "specification" or "standard" for any particular language. I still talk to people who think that Microsoft invented C++, and that if a program doesn't compile under VC6, it's not a valid C++ program. Programmers these days have it easy when it comes to obtaining specs. Newer languages like C#, Java, Python, Ruby, etc. all have their documentation available for free from the vendors' web sites. Older languages and platforms often have standards controlled by standards bodies that demand payment for specs, but even that shouldn't be a deterrent: the C++ standard is available from ISO for $30 (and why am I the only person I know who has a copy?). Programming is hard enough even when you do know the language. If you don't, I don't see how you have a chance. What do the rest of you think? Am I right, or should we all be content with the typical level of programming language expertise? Update: Several great comments here. Thanks. A couple of people hit on something that I didn't think about: What really irks me is not the lack of knowledge, but the lack of curiosity and willingness to learn. It seems some people don't have any time to hone their craft, but they have plenty of time to write lots of bad code. And I don't expect people to be able to recite a list of keywords or EBNF expressions, but I do expect that when they see some code, they should have some inkling of what it does. Few people have complete knowledge of every dark corner of their language or platform, but everyone should at least know enough that when they see something unfamiliar, they will know how to get whatever additional information they need to understand it.

    Read the article

  • Learning OpenGL ES 1.x

    - by Kristopher Johnson
    What is the quickest way to come up to speed on OpenGL ES 1.x? Let's assume I know nothing about OpenGL (which is not entirely true, but it's been a while since I last used OpenGL). I am most interested in learning this for iPhone-related development, but I'm interested in learning how it works on other platforms as well. I've found the book OpenGL ES 2.0 Programming Guide, but I am concerned that it might not be the best approach because it focuses on 2.0 rather than 1.x. My understanding is that 2.0 is not backwards-compatible with 1.x, so I may miss out on some important concepts. Note: For answers about learning general OpenGL, see http://stackoverflow.com/questions/62540/learning-opengl Some resources I've found: http://khronos.org/opengles/1_X/ http://www.imgtec.com/powervr/insider/sdk/KhronosOpenGLES1xMBX.asp OpenGL Distilled by Paul Martz (a good refresher on OpenGL basics)

    Read the article

  • JOIN in SQL with one-to-many relationship

    - by Kristopher Ives
    I'm making a tool to track calls to house/senate reps, and I have 2 tables of importance here: reps rep_id rep_name # and more info comments rep_id status # enum about result of contact comment I want to query for all reps joining the most recent associated comments and in some cases joining comments of a specific status, but there might not be any comments associated with that rep yet. THANKS!

    Read the article

  • Using Mercurial in a Large Organization

    - by Kristopher Johnson
    I've been using Mercurial for my own personal projects for a while, and I love it. My employer is considering a switch from CVS to SVN, but I'm wondering whether I should push for Mercurial (or some other DVCS) instead. One wrinkle with Mercurial is that it seems to be designed around the idea of having a single repository per "project". In this organization, there are dozens of different executables, DLLs, and other components in the current CVS repository, hierarchically organized. There are a lot of generic reusable components, but also some customer-specific components, and customer-specific configurations. The current build procedures generally get some set of subtrees out of the CVS repository. If we move from CVS to Mercurial, what is the best way to organize the repository/repositories? Should we have one huge Mercurial repository containing everything? If not, how fine-grained should the smaller repositories be? I think people will find it very annoying if they have to pull and push updates from a lot of different places, but they will also find it annoying if they have to pull/push the entire company codebase. Anybody have experience with this, or advice?

    Read the article

  • Finding City and Zip Code for a Location

    - by Kristopher Johnson
    Given a latitude and longitude, what is the easiest way to find the name of the city and the US zip code of that location. (This is similar to http://stackoverflow.com/questions/23572/latitude-longitude-database, except I want to convert in the opposite direction.) Related question: http://stackoverflow.com/questions/158557/get-street-address-at-latlong-pair

    Read the article

  • Dynamic Dispatch without Virtual Functions

    - by Kristopher Johnson
    I've got some legacy code that, instead of virtual functions, uses a kind field to do dynamic dispatch. It looks something like this: // Base struct shared by all subtypes // Plain-old data; can't use virtual functions struct POD { int kind; int GetFoo(); int GetBar(); int GetBaz(); int GetXyzzy(); }; enum Kind { Kind_Derived1, Kind_Derived2, Kind_Derived3 }; struct Derived1: POD { Derived1(): kind(Kind_Derived1) {} int GetFoo(); int GetBar(); int GetBaz(); int GetXyzzy(); // plus other type-specific data and function members }; struct Derived2: POD { Derived2(): kind(Kind_Derived2) {} int GetFoo(); int GetBar(); int GetBaz(); int GetXyzzy(); // plus other type-specific data and function members }; struct Derived3: POD { Derived3(): kind(Kind_Derived3) {} int GetFoo(); int GetBar(); int GetBaz(); int GetXyzzy(); // plus other type-specific data and function members }; and then the POD class's function members are implemented like this: int POD::GetFoo() { // Call kind-specific function switch (kind) { case Kind_Derived1: { Derived1 *pDerived1 = static_cast<Derived1*>(this); return pDerived1->GetFoo(); } case Kind_Derived2: { Derived2 *pDerived2 = static_cast<Derived2*>(this); return pDerived2->GetFoo(); } case Kind_Derived3: { Derived3 *pDerived3 = static_cast<Derived3*>(this); return pDerived3->GetFoo(); } default: throw UnknownKindException(kind, "GetFoo"); } } POD::GetBar(), POD::GetBaz(), POD::GetXyzzy(), and other members are implemented similarly. This example is simplified. The actual code has about a dozen different subtypes of POD, and a couple dozen methods. New subtypes of POD and new methods are added pretty frequently, and so every time we do that, we have to update all these switch statements. The typical way to handle this would be to declare the function members virtual in the POD class, but we can't do that because the objects reside in shared memory. There is a lot of code that depends on these structs being plain-old-data, so even if I could figure out some way to have virtual functions in shared-memory objects, I wouldn't want to do that. So, I'm looking for suggestions as to the best way to clean this up so that all the knowledge of how to call the subtype methods is centralized in one place, rather than scattered among a couple dozen switch statements in a couple dozen functions. What occurs to me is that I can create some sort of adapter class that wraps a POD and uses templates to minimize the redundancy. But before I start down that path, I'd like to know how others have dealt with this.

    Read the article

  • Count total number of callers?

    - by Kristopher Ives
    I'm currently doing this query to find the guy who makes the most calls: SELECT `commenter_name`, COUNT(*) AS `calls` FROM `comments` GROUP BY `commenter_name` ORDER BY `calls` LIMIT 1 What I want now is to be able to find out how many total unique callers. I tried using DISTINCT but I didn't get anywhere.

    Read the article

  • How do I make textarea a TinyMCE in Joomla?

    - by Kristopher Ives
    I have a component and I want to make a textarea on the admin backend interface use the TinyMCE editor: How do I reference the TinyMCE that is being used by other components (instead of duplicating it) 2.) How do I hook into the page init or some place where I can let TinyMCE do it's magic (of if Joomla provides a way) Thanks

    Read the article

  • Stacking standard output of `su`

    - by Kristopher Ives
    I've got some code that I wrote that uses a combination of bash and PHP command line scripting. The script is ran as root and then uses su to become various uses. I start a session like this: $result = `su SomeUser ./dothis.php` Here ./dothis.php is a script that may generate some output being stored in $result, but the problem is that there is usually output that doesn't get caught and makes it hard for me to read my script output. How can I make sure that the output is being captured within this su stacking?

    Read the article

  • header redirect in Wordpress Plugin?

    - by Kristopher
    I'm writing a Wordpress plugin, and based on certain circumstances, I want to redirect to a different page, but the redirect never happens. headers_sent() returns false. I'm using the pre_get_posts hook. Here is a small snippet: function test_redirect() { header("Location: http://www.cnn.com/"); } add_action('pre_get_posts', 'test_redirect'); The redirect never happens, and no errors are reported on the page or in the error log. Why can't I redirect?

    Read the article

< Previous Page | 1 2 3  | Next Page >