Search Results

Search found 100910 results on 4037 pages for 'linux server'.

Page 2/4037 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Serial connection over a single USB cable (Windows to linux, or linux to linux)

  - by andyortlieb

  I'm helping out with a project for an embedded device that only has USB and no serial. This device is running Linux. These days, when we need to connect to a serial port on a device we typically use a USB to serial adapter (on something like a phone system or a load balancing device, etc). I would like to know if it is possible to have the host device behave as though it were a serial adapter, thus removing the need for one. Given the nature of USB, is this approach even necessary? To recap, I would like to be able to connect a single A-to-A USB cable from my workstation (be it windows or linux) to this device, for the purpose of administration (especially initial setup), using minicom, putty or hyperterminal. Thanks

  Read the article

• Migrate database from SQL Server Standard to SQL Server Express for DotNetNuke

  - by Bjørn

  Hello, we have an old server that we want to dedicate fully as a public webserver (hosting a few DotNetNuke sites), and for this purpose we would like to install SQL Server Express (probably 2008) on the server and thus have both the Database server and the Web Server on the machine. But: The databases for the webserver are hosted on a SQL Server 2005 Standard today. So the question is: Is it possible to move a database from a Standard Server to an Express Server?

  Read the article

• Windows Server 2003 Terminal Server does not give out all available licenses (solved)

  - by Erwin Blonk

  I installed the Terminal Server role in Windows Server 2003 Standard 64-bits. Still, only 2 connections are allowed. The License Manager says that there are 10 Device CALs available, which is correct, and that none are given out. For good measure I let the server reboot, to no effect. Before this, there was another server (same Windows, except that it is 32 bits) active as a licensing server. I removed the role first and then then added it to the new server. I then removed the Terminal Server Licensing Server component off the old one and added it to the new one. After that, I added to licenses. When that didn't give the required result, I rebooted to new server. Still, the new server, with licenses and all, acts as if it has the 2 license RDP. The server are all stand-alone, there is no active directory been set up. Both servers are in different workgroups. Update (4/12/10): The server has changed the entries in the Terminal Server Licensing a few times. After installing the licenses it added an entry of which the exact phrasing I forgot but it was about temporary Windows 2003 device licenses. Later it added Windows Server 2003 - TS Per Device CAL. The temporary held 2 licenses (standard RDP licenses, I think) and the other 10. At some point, seemingly unrelated from the testing we did, it used a licenses from the new pool. This morning, 2 licenses were used from the pool of 10 and only 1 from the temporary/RDP pool (I wish I had screenshots to show, it changed every few hours oir so it seems). Although I had already activated the server over the internet, and re-activated it, I decided to go through the whole procedure by phone. Update 2 (4/12/10) The problem has been solved. It seems the activation over the web, while it said to have succeeded, did not work correctly. After activating by phone, it did work. What was different from the old setup and what put me on the wrong foot from that moment, was that I now need to create seperate user account because a session with one user account will be taken over by someone else when that account is used by that person. On the previous server, it was possible to open several sesions with the same account. We now use Per Device licenses, I'm not sure what was used before. Thanks all for the replies.

  Read the article

• Best Linux distro for load-balancers?

  - by Vimvq1987

  I wanted to try HAProxy/Linux Virtual Server like front-end load-balancers, but as far I know, they're Linux-based software. I don't have any experiences with Linux yet. so there're quite many questions to ask: What is the best Linux distro(s) for load-balancing? I plan to use VirtualPC to run some virtual machines. How much RAM is the best for each machine run that distro? I want to simulate a load-balancer with can handle about 100 hits/second, is it possible? Thank you very much!

  Read the article

• SQL Server Agent was not running on Server Dynamics CRM 2013

  - by No1_Melman

  I'm trying to install Dynamics CRM 2013 on a server. This server is on a VM. There are several other VMs, an ADDS & DNS, a MSSQL and a WebServer VM. Each server is a Windows Server 2012 R2. The SQL Server is 2012 Enterprise. Each VM is part of the main Domain, set by the ADDS & DNS. NSLookup confirms I can see the computer at the right IP address. Each separate VM has its own static IP, the DNS is set to the ADDS & DNS. I use the domain administrator to log into all the servers, and make the that domain administrator a local administrator. I've set up all the domain users for the CRM and gave them appropriate permissions, I have also added the accounts to the appropriate places, such that the CRM Deployment user is in the SQL security. The SQL Agent is running. SQL server configuration manager has SQL server network configuration TCP/IP enabled to allow remote connections. The SQL server has the domain user as a administrator, which is the same user being used to install the CRM. In the CRM setup i point to the [Servername]\[Instance] and I have also tried just the [Servername]. to make this easier I called the server MSSQL and left the instance name to the default. I even install the MSSQL instance as the domain administrator. CRM can find the ReportServer url. I have enable all the ports required, including: 135, 1433, 1434, 2382, 2383, 4022. 1434 UDP. I feel like I have absolutely done everything, I have google many times and tried all the different methods, and for the life of me I cant seem to get the CRM setup to find the SQL server agent. It passes everything else perfectly fine. I can even ping the MSSQL server. What is the problem, why does the CRM still keep giving the error: SQLSERVERAGENT (SQLSERVERAGENT) service is not running on the server MSSQL On the MSSQL server, the name of the sql server agent service is: SQL Server Agent (MSSQLSERVER)

  Read the article

• How is the Linux repository administrated?

  - by David

  I am amazed by the Linux project and I would like to learn how they administrate the code, given the huge number of developers. I found the Linux repository on GitHub, but I do not understand how it is administrated. For example the following commit: https://github.com/torvalds/linux/commit/31fd84b95eb211d5db460a1dda85e004800a7b52 Notice the following part: So one authored and Torvalds committed. How is this possible. I thought that it was only possible to have either pull or pushing rights, but here it seems like there is an approval stage. I should mention that the specific problem I am trying to solve is that we use pull requests to our repo. The problem we are facing is that while a pull request is waiting to get merged, it is often broken by a commit. This leads to a seemingly never ending work to adapt the fork in order to make the pull request merge smoothly. Do Linux solve this by giving lots of people pushing rights (at least there are currently just three pull requests but hundreds of commits per day).

  Read the article

• Linked server problem on SQL Server 2005

  - by BradyKelly

  I have a weird issue and I hope someone can steer me in the right direction for resolving this please. When I execute the following query against a linked server, I get the following error. I can connect to the server in SSMS as a separate server, and execute a similar query against its Deposits table. The nn.nn is my own replacement to avoid broadcasting our server addresses. The query: select td.Batch , td.DateTimeDeposited from Deposits cd left join [172.nn.nn.32\sqlexpress].Terminal.dbo.Deposits td on cd.DateTimeDeposited = td.DateTimeDeposited The error: OLE DB provider "SQLNCLI" for linked server "172.nn.nn.11\sqlexpress" returned message "Login timeout expired". OLE DB provider "SQLNCLI" for linked server "172.nn.nn.11\sqlexpress" returned message "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.". Msg 65535, Level 16, State 1, Line 0 SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF]. Notice how the error is about server 172.nn.nn.11 and not 172.nn.nn.32. SOLVED (STUPID ME): Somebody had added an extra bit to my query that was scrolled off-screen and was querying the 17.nn.nn.11 server.

  Read the article

• Can't access SQL Server 2008 from workstations, but can from server

  - by Kev

  We have an app that can use mssql2k or 2k8. We've been using 2k but I decided to try 2k8 to compare. I installed in on our win2k3 server alongside mssql2k. In the ODBC applet on the server, I was able to set up access to 2k8, and it passes the test at the end successfully, whether I tell it to use Windows Authentication or an sql login. The latter is how the app always accessed mssql2k. The app works fine from the server, but when I try it on a workstation (winxpsp3), I get a window titled, "Microsoft SQL Server Login" that says: Connection failed: SQLState: '01000' SQL Server Error: 53 [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()). Connection failed: SQLState: '08001' SQL Server ERror: 17 [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied. Then I get the ODBC login dialog, which I can't get to login correctly (I just keep getting the same error above), even copying and pasting a password after resetting it on the server, and whether "trusted" is checked or not. "Options" is disabled. The server was straight SERVERNAME for mssql2k, but for mssql2k8 it's called SERVERNAME\mssql2008. That works on the server, why not on the workstation? (Which I'm logged in as the same person on, BTW.)

  Read the article

• Migrating from IBM AIX/DB2 Power systems to Oracle Technologies

  - by zeynep.koch(at)oracle.com

  If you are planning to migrate from  IBM DB2 on AIX Power Systems to more open and better-performing computing environment--one that offers enhanced flexibility, clustering, availability, and security, as well as lower maintenance than download this guide that outlines migrating to Oracle Database 11g and Oracle Linux running on Oracle's Sun Fire X4800 server.This guide shows you how to:Move sample applications with an IBM DB2 on an IBM Power System to Oracle Database 11g Release 2Install Oracle Linux and Oracle Database Release 2 on the Oracle's Sun Fire X4800 serverMigrate user databases from the IBM Power System to Oracle's Sun Fire X4800 serverDownload

  Read the article

• SQL SERVER – Concat Strings in SQL Server using T-SQL – SQL in Sixty Seconds #035 – Video

  - by pinaldave

  Concatenating  string is one of the most common tasks in SQL Server and every developer has to come across it. We have to concat the string when we have to see the display full name of the person by first name and last name. In this video we will see various methods to concatenate the strings. SQL Server 2012 has introduced new function CONCAT which concatenates the strings much efficiently. When we concat values with ‘+’ in SQL Server we have to make sure that values are in string format. However, when we attempt to concat integer we have to convert the integers to a string or else it will throw an error. However, with the newly introduce the function of CONCAT in SQL Server 2012 we do not have to worry about this kind of issue. It concatenates strings and integers without casting or converting them. You can specify various values as a parameter to CONCAT functions and it concatenates them together. Let us see how to concat the values in Sixty Seconds: Here is the script which is used in the video. -- Method 1: Concatenating two strings SELECT 'FirstName' + ' ' + 'LastName' AS FullName -- Method 2: Concatenating two Numbers SELECT CAST(1 AS VARCHAR(10)) + ' ' + CAST(2 AS VARCHAR(10)) -- Method 3: Concatenating values of table columns SELECT FirstName + ' ' + LastName AS FullName FROM AdventureWorks2012.Person.Person -- Method 4: SQL Server 2012 CONCAT function SELECT CONCAT('FirstName' , ' ' , 'LastName') AS FullName -- Method 5: SQL Server 2012 CONCAT function SELECT CONCAT('FirstName' , ' ' , 1) AS FullName Related Tips in SQL in Sixty Seconds: SQL SERVER – Concat Function in SQL Server – SQL Concatenation String Function – CONCAT() – A Quick Introduction 2012 Functions – FORMAT() and CONCAT() – An Interesting Usage A Quick Trick about SQL Server 2012 CONCAT Function – PRINT A Quick Trick about SQL Server 2012 CONCAT function What would you like to see in the next SQL in Sixty Seconds video? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Database, Pinal Dave, PostADay, SQL, SQL Authority, SQL in Sixty Seconds, SQL Query, SQL Scripts, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology, Video Tagged: Excel

  Read the article

• Should I switch my server to Ubuntu Server from Windows Server 2003

  - by user22162

  I have a server thats primarily used for SRCDS, I host a few Team Fortress 2 servers on it and I would much prefer a ssh-like (more so the no-gui part) for something like this, mostly because I can't navigate with my phone on VNC very well and also because there really is no need for a gui in this situation. I sort of want to make the switch but I am unsure, because my server 2003 is very fast and If I do need to reboot, it can reboot in under 30 seconds to desktop. Should I switch?

  Read the article

• Import database: SQL Server 2005 Express to SQL Server 2008 Enterprise

  - by Khou

  I have two servers 1 x SQL Server 2005 Express and 1 x SQL Server 2008 Enterprise How can I move/import my database from SQL Server 2005 Express to SQL Server 2008 Enterprise? (BACKUP SQL SERVER 2005 and RESTORE to SQL Server 2008, would that work?)

  Read the article

• RDS installation failure on 2012 R2 Server Core VM in Hyper-V Server

  - by Giles

  I'm currently installing a test-bed for my firms Infrastructure replacement. 10 or so Windows/Linux servers will be replaced by 2 physical servers running Hyper-V server. All services (DC, RDS, SQL) will be on Windows 2012 R2 Server Core VMs, Exchange on Server 2012 R2 GUI, and the rest are things like Elastix, MailArchiver etc, which aren't part of the equation thus far. I have installed Hyper-V server on a test box, and sucessfully got two virtual DC's running, SQL 2014 running, and 8.1 which I use for the RSAT tools. When trying to install RDS (The old fashioned kind, not the newer VDI(?) style), I get a failed installation due to the server not being able to reboot. A couple of articles have said not to do it locally, so I've moved on. Sitting at the Powershell prompt on the Domain Controller or SQL server (Both Server Core), I run the following commands: Import-Module RemoteDesktop New-SessionDeployment -ConnectionBroker "AlstersTS.Alsters.local" -SessionHost "AlstersTS.Alsters.local" The installation begins, carries on for 2 or 3 minutes, then I receive the following error message: New-SessionDeployment : Validation failed for the "RD Connection Broker" parameter. AlstersTS.Alsters.local Unable to connect to the server by using WindowsPowerShell remoting. Verify that you can connect to the server. At line:1 char:1 + NewSessionDeployment -ConnectionBroker "AlstersTS.Alsters.local" -SessionHost " ... + + CategoryInfo : NotSpecified: (:) [Write-Error], WriteErrorException + FullyQualifiedErrorID : Microsoft.PowerShell.Commands.WriteErrorException,New-SessionDeployment So far, I have: Triple, triple checked syntax. Tried various other commands, and a script to accomplish the same task. Checked DNS is functioning as it should. Checked to the best of my knowledge that AD is working as it should. Checked that the Network Service has the needed permissions. Created another VM and placed the two roles on different servers. Deleted all VMs, started again with a new domain name (Lather, rinse, repeat) Performed the whole installation on a second physical box running Hyper-V Server Pleaded with it Interestingly, if I perform the installation via a GUI installation, the thing just works! Now I know I could convert this to a Server Core role after installation, but this wouldn't teach me what was wrong in the first instance. I've probably got 10 pages through various Google searches, each page getting a little less relevant. The closest matches seem to have good information, but it doesn't seem to be the fix for my set-up. As a side note, I expected to be able to "tee" or "out-file" the error message into a text file, but couldn't get that to work either, so I've typed in the error message manually. Chaps, any suggestions, from the glaringly obvious, to the long-winded and complex? Thanks!

  Read the article

• Uninstalling Reporting Server 2008 on Windows Server 2008

  - by Piotr Rodak

  Ha. I had quite disputable pleasure of installing and reinstalling and reinstalling and reinstalling – I think about 5 times before it worked – Reporting Server 2008 on Windows Server with the same year number in name. During my struggle I came across an error which seems to be not quite unfamiliar to some more unfortunate developers and admins who happen to uninstall SSRS 2008 from the server. I had the SSRS 2008 installed as named instance, SQL2008. I wanted to uninstall the server and install it to default instance. And this is when it bit me – not the first time and not the last that day . The setup complained that it couldn’t access a DLL: Error message: TITLE: Microsoft SQL Server 2008 Setup ------------------------------ The following error has occurred: Access to the path 'C:\Windows\SysWOW64\perf-ReportServer$SQL2008-rsctr.dll' is denied. For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1600.22&EvtType=0x60797DC7%25400x84E8D3C0 ------------------------------ BUTTONS: OK This is a screenshot that shows the above error: This issue seems to have a bit of literature dedicated to it and even seemingly a KB article http://support.microsoft.com/kb/956173 and a similar Connect item: http://connect.microsoft.com/SQLServer/feedback/details/363653/error-messages-when-upgrading-from-sql-2008-rc0-to-rtm The article describes issue as following: When you try to uninstall Microsoft SQL Server 2008 Reporting Services from the server, you may receive the following error message: An error has occurred: Access to the path 'Drive_Letter:\WINDOWS\system32\perf-ReportServer-rsctr.dll' is denied. Note Drive_Letter refers to the disc drive into which the SQL Server installation media is inserted. In my case, the Note was not true; the error pointed to a dll that was located in Windows folder on C:\, not where the installation media were. Despite this difference I tried to identify any processes that might be keeping lock on the dll. I downloaded Sysinternals process explorer and ran it to find any processes I could stop. Unfortunately, there was no such process. I tried to rerun the installation, but it failed at the same step. Eventually I decided to remove the dll before the setup was executed. I changed name of the dll to be able to restore it in case of some issues. Interestingly, Windows let me do it, which means that indeed, it was not locked by any process. I ran the setup and this time it uninstalled the instance without any problems:   To summarize my experience I should say – be very careful, don’t leave any leftovers after uninstallation – remove/rename any folders that are left after setup has finished. For some reason, setup doesn’t remove folders and certain files. Installation on Windows Server 2008 requires more attention than on Windows 2003 because of the changed security model, some actions can be executed only by administrator in elevated execution mode. In general, you have to get used to UAC and a bit different experience than with Windows Server 2003. Technorati Tags: SQL Server 2008,Windows Server 2008,SRS,Reporting Services

  Read the article

• Follow ORCL_Linux on Twitter

  - by sergio.leunissen

  We've created the following Twitter handles for those of you who like your Oracle Linux and virtualization news in micro chunks ORCL_Linux ORCL_virtualize

  Read the article

• Easy software installation on Linux(Ubuntu/ Linux mint)

  - by Aash Maharoon

  When a software is installed, it has to be done with the terminal and coding. There are some steps to do which can be difficult for a new user(comes from windows OS). In Windows OS, we can set paths for installation directory, uninstall easily and installation GUI application comes with the software which is very easy to do with using mouse only. I am new to Linux and love to use it. Is there any methodologies or softwares which can be very user friendly for application installation with GUI support ? or only the terminal should be used ?

  Read the article

• SQL SERVER – History of SQL Server Database Encryption

  - by pinaldave

  I recently met Michael Coles and Rodeney Landrum the author of one of the kind book Expert SQL Server 2008 Encryption at SQLPASS in Seattle. During the conversation we ended up how Microsoft is evolving encryption technology. The same discussion lead to talking about history of encryption tools in SQL Server. Michale pointed me to page 18 of his book of encryption. He explicitly give me permission to re-produce relevant part of history from his book. Encryption in SQL Server 2000 Built-in cryptographic encryption functionality was nonexistent in SQL Server 2000 and prior versions. In order to get server-side encryption in SQL Server you had to resort to purchasing or creating your own SQL Server XPs. Creating your own cryptographic XPs could be a daunting task owing to the fact that XPs had to be compiled as native DLLs (using a language like C or C++) and the XP application programming interface (API) was poorly documented. In addition there were always concerns around creating wellbehaved XPs that “played nicely” with the SQL Server process. Encryption in SQL Server 2005 Prior to the release of SQL Server 2005 there was a flurry of regulatory activity in response to accounting scandals and attacks on repositories of confidential consumer data. Much of this regulation centered onthe need for protecting and controlling access to sensitive financial and consumer information. With the release of SQL Server 2005 Microsoft responded to the increasing demand for built-in encryption byproviding the necessary tools to encrypt data at the column level. This functionality prominently featured the following: Support for column-level encryption of data using symmetric keys or passphrases. Built-in access to a variety of symmetric and asymmetric encryption algorithms, including AES, DES, Triple DES, RC2, RC4, and RSA. Capability to create and manage symmetric keys. Key creation and management. Ability to generate asymmetric keys and self-signed certificates, or to install external asymmetric keys and certificates. Implementation of hierarchical model for encryption key management, similar to the ANSI X9.17 standard model. SQL functions to generate one-way hash codes and digital signatures, including SHA-1 and MD5 hashes. Additional SQL functions to encrypt and decrypt data. Extensions to the SQL language to support creation, use, and administration of encryption keys and certificates. SQL CLR extensions that provide access to .NET-based encryption functionality. Encryption in SQL Server 2008 Encryption demands have increased over the past few years. For instance, there has been a demand for the ability to store encryption keys “off-the-box,” physically separate from the database and the data it contains. Also there is a recognized requirement for legacy databases and applications to take advantage of encryption without changing the existing code base. To address these needs SQL Server 2008 adds the following features to its encryption arsenal: Transparent Data Encryption (TDE): Allows you to encrypt an entire database, including log files and the tempdb database, in such a way that it is transparent to client applications. Extensible Key Management (EKM): Allows you to store and manage your encryption keys on an external device known as a hardware security module (HSM). Cryptographic random number generation functionality. Additional cryptography-related catalog views and dynamic management views. SQL language extensions to support the new encryption functionality. The encryption book covers all the tools in its various chapter in one simple story. If you are interested how encryption evolved and reached to the stage where it is today, this book is must for everyone. You can read my earlier review of the book over here. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Book Review, SQLAuthority News, T SQL, Technology Tagged: Encryption, SQL Server Encryption, SQLPASS

  Read the article

• Trying to make a custom Arch-based Linux distro with larch

  - by strangeronyourtrain

  I'm all set up with a spiffy Arch installation in a virtual machine, and now I want to turn it into a live ISO. When I heard about larch, I thought it would be the perfect tool to turn my existing installation into something I could distribute. However, I can't get larch to install properly. I followed the installation instructions on the website, which said to download and run the larch-setup script. When I run it, though, it installs the larch profiles and libraries but doesn't install the executable programs. Here's a screenshot of the errors I get when larch-setup tries to install the executables. I'd greatly appreciate any clues to what is going wrong here, or suggestions for alternative ways to turn my customized Arch installation into an ISO! Thanks!

  Read the article

• Error while installing ltsp server package in fedora 12

  - by paragjain16

  Hi, i am using fedora 12, while i was installing ltsp(Linux terminal server project) server package, it told me that some more packages need to be installed with it as well, while downloading the packages i got the following error - Local Conflict between packages Test Transaction Errors: file /usr/share/man/man5/dhcp-eval.5.gz from install of dhcp-12:4.1.1-5.fc12.i686 conflicts with file from package dhclient-12:4.1.0p1-12.fc12.i686 file /usr/share/man/man5/dhcp-options.5.gz from install of dhcp-12:4.1.1-5.fc12.i686 conflicts with file from package dhclient-12:4.1.0p1-12.fc12.i686 i also deleted all the dhcp packages from man5 directory, even then it is giving the same error msg. please help me with it

  Read the article

• SQL Server Configuration timeouts - and a workaround [SSIS]

  - by jamiet

  Ever since I started writing SSIS packages back in 2004 I have opted to store configurations in .dtsConfig (.i.e. XML) files rather than in a SQL Server table (aka SQL Server Configurations) however recently I inherited some packages that used SQL Server Configurations and thus had to immerse myself in their murky little world. To all the people that have ever gone onto the SSIS forum and asked questions about ambiguous behaviour of SQL Server Configurations I now say this... I feel your pain! The biggest problem I have had was in dealing with the change to the order in which configurations get applied that came about in SSIS 2008. Those changes are detailed on MSDN at SSIS Package Configurations however the pertinent bits are: As the utility loads and runs the package, events occur in the following order: The dtexec utility loads the package. The utility applies the configurations that were specified in the package at design time and in the order that is specified in the package. (The one exception to this is the Parent Package Variables configurations. The utility applies these configurations only once and later in the process.) The utility then applies any options that you specified on the command line. The utility then reloads the configurations that were specified in the package at design time and in the order specified in the package. (Again, the exception to this rule is the Parent Package Variables configurations). The utility uses any command-line options that were specified to reload the configurations. Therefore, different values might be reloaded from a different location. The utility applies the Parent Package Variable configurations. The utility runs the package. To understand how these steps differ from SSIS 2005 I recommend reading Doug Laudenschlager’s blog post Understand how SSIS package configurations are applied. The very nature of SQL Server Configurations means that the Connection String for the database holding the configuration values needs to be supplied from the command-line. Typically then the call to execute your package resembles this: dtexec /FILE Package.dtsx /SET "\Package.Connections[SSISConfigurations].Properties[ConnectionString]";"\"Data Source=SomeServer;Initial Catalog=SomeDB;Integrated Security=SSPI;\"", The problem then is that, as per the steps above, the package will (1) attempt to apply all configurations using the Connection String stored in the package for the "SSISConfigurations" Connection Manager before then (2) applying the Connection String from the command-line and then (3) apply the same configurations all over again. In the packages that I inherited that first attempt to apply the configurations would timeout (not unexpected); I had 8 SQL Server Configurations in the package and thus the package was waiting for 2 minutes until all the Configurations timed out (i.e. 15seconds per Configuration) - in a package that only executes for ~8seconds when it gets to do its actual work a delay of 2minutes was simply unacceptable. We had three options in how to deal with this: Get rid of the use of SQL Server configurations and use .dtsConfig files instead Edit the packages when they get deployed Change the timeout on the "SSISConfigurations" Connection Manager #1 was my preferred choice but, for reasons I explain below*, wasn't an option in this particular instance. #2 was discounted out of hand because it negates the point of using Configurations in the first place. This left us with #3 - change the timeout on the Connection Manager. This is done by going into the properties of the Connection Manager, opening the "All" tab and changing the Connect Timeout property to some suitable value (in the screenshot below I chose 2 seconds). This change meant that the attempts to apply the SQL Server configurations timed out in 16 seconds rather than two minutes; clearly this isn't an optimum solution but its certainly better than it was. So there you have it - if you are having problems with SQL Server configuration timeouts within SSIS try changing the timeout of the Connection Manager. Better still - don't bother using SQL Server Configuration in the first place. Even better - install RC0 of SQL Server 2012 to start leveraging SSIS parameters and leave the nasty old world of configurations behind you. @Jamiet * Basically, we are leveraging a SSIS execution/logging framework in which the client had invested a lot of resources and SQL Server Configurations are an integral part of that.

  Read the article

• Connectivity with SQL Server Express 2008 r2 and SQL Server 2000 on same machine

  - by Jim R

  At first glance this may same a duplicate of Installing both SQL Server 2000 and SQL Server 2008 on the same machine, but it is not. I have SQL Server 2000 and SQL Server 2008 R2 installed on the same machine and working fine. My problem lies with connecting to the 2008 R2 server from a remote machine. My connectivity needs to be TCP. The legacy installation or SQL 2000 uses the default port of 1433. The named instance is by default configured to use 'Shared Memory' and is working fine. When I configured the 2008 R2 server to use 1433 (I did not think that thru) the service refused to start becasue 1433 was already in use by the legacy SQL 2000 default instance. Doh! What I want to do is have both servers available simultaneously via TCP. both servers need not be on the same port, put if I cannot run them on the same port, then how do I configure the clients? Is there not some kind of proxy available that can monitor the 1433 port and pass the request thru to the correct SQL instance by name? Is this capability built into SQL server already? Thanks, Jim

  Read the article

• SQL SERVER – Server Side Paging in SQL Server 2011 Performance Comparison

  - by pinaldave

  Earlier, I have written about SQL SERVER – Server Side Paging in SQL Server 2011 – A Better Alternative. I got many emails asking for performance analysis of paging. Here is the quick analysis of it. The real challenge of paging is all the unnecessary IO reads from the database. Network traffic was one of the reasons why paging has become a very expensive operation. I have seen many legacy applications where a complete resultset is brought back to the application and paging has been done. As what you have read earlier, SQL Server 2011 offers a better alternative to an age-old solution. This article has been divided into two parts: Test 1: Performance Comparison of the Two Different Pages on SQL Server 2011 Method In this test, we will analyze the performance of the two different pages where one is at the beginning of the table and the other one is at its end. Test 2: Performance Comparison of the Two Different Pages Using CTE (Earlier Solution from SQL Server 2005/2008) and the New Method of SQL Server 2011 We will explore this in the next article. This article will tackle test 1 first. Test 1: Retrieving Page from two different locations of the table. Run the following T-SQL Script and compare the performance. SET STATISTICS IO ON; USE AdventureWorks2008R2 GO DECLARE @RowsPerPage INT = 10, @PageNumber INT = 5 SELECT * FROM Sales.SalesOrderDetail ORDER BY SalesOrderDetailID OFFSET @PageNumber*@RowsPerPage ROWS FETCH NEXT 10 ROWS ONLY GO USE AdventureWorks2008R2 GO DECLARE @RowsPerPage INT = 10, @PageNumber INT = 12100 SELECT * FROM Sales.SalesOrderDetail ORDER BY SalesOrderDetailID OFFSET @PageNumber*@RowsPerPage ROWS FETCH NEXT 10 ROWS ONLY GO You will notice that when we are reading the page from the beginning of the table, the database pages read are much lower than when the page is read from the end of the table. This is very interesting as when the the OFFSET changes, PAGE IO is increased or decreased. In the normal case of the search engine, people usually read it from the first few pages, which means that IO will be increased as we go further in the higher parts of navigation. I am really impressed because using the new method of SQL Server 2011,  PAGE IO will be much lower when the first few pages are searched in the navigation. Test 2: Retrieving Page from two different locations of the table and comparing to earlier versions. In this test, we will compare the queries of the Test 1 with the earlier solution via Common Table Expression (CTE) which we utilized in SQL Server 2005 and SQL Server 2008. Test 2 A : Page early in the table -- Test with pages early in table USE AdventureWorks2008R2 GO DECLARE @RowsPerPage INT = 10, @PageNumber INT = 5 ;WITH CTE_SalesOrderDetail AS ( SELECT *, ROW_NUMBER() OVER( ORDER BY SalesOrderDetailID) AS RowNumber FROM Sales.SalesOrderDetail PC) SELECT * FROM CTE_SalesOrderDetail WHERE RowNumber >= @PageNumber*@RowsPerPage+1 AND RowNumber <= (@PageNumber+1)*@RowsPerPage ORDER BY SalesOrderDetailID GO SET STATISTICS IO ON; USE AdventureWorks2008R2 GO DECLARE @RowsPerPage INT = 10, @PageNumber INT = 5 SELECT * FROM Sales.SalesOrderDetail ORDER BY SalesOrderDetailID OFFSET @PageNumber*@RowsPerPage ROWS FETCH NEXT 10 ROWS ONLY GO Test 2 B : Page later in the table -- Test with pages later in table USE AdventureWorks2008R2 GO DECLARE @RowsPerPage INT = 10, @PageNumber INT = 12100 ;WITH CTE_SalesOrderDetail AS ( SELECT *, ROW_NUMBER() OVER( ORDER BY SalesOrderDetailID) AS RowNumber FROM Sales.SalesOrderDetail PC) SELECT * FROM CTE_SalesOrderDetail WHERE RowNumber >= @PageNumber*@RowsPerPage+1 AND RowNumber <= (@PageNumber+1)*@RowsPerPage ORDER BY SalesOrderDetailID GO SET STATISTICS IO ON; USE AdventureWorks2008R2 GO DECLARE @RowsPerPage INT = 10, @PageNumber INT = 12100 SELECT * FROM Sales.SalesOrderDetail ORDER BY SalesOrderDetailID OFFSET @PageNumber*@RowsPerPage ROWS FETCH NEXT 10 ROWS ONLY GO From the resultset, it is very clear that in the earlier case, the pages read in the solution are always much higher than the new technique introduced in SQL Server 2011 even if we don’t retrieve all the data to the screen. If you carefully look at both the comparisons, the PAGE IO is much lesser in the case of the new technique introduced in SQL Server 2011 when we read the page from the beginning of the table and when we read it from the end. I consider this as a big improvement as paging is one of the most used features for the most part of the application. The solution introduced in SQL Server 2011 is very elegant because it also improves the performance of the query and, at large, the database. Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: SQL, SQL Authority, SQL Optimization, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Oracle Database Smart Flash Cache: Only on Oracle Linux and Oracle Solaris

  - by sergio.leunissen

  Oracle Database Smart Flash Cache is a feature that was first introduced with Oracle Database 11g Release 2. Only available on Oracle Linux and Oracle Solaris, this feature increases the size of the database buffer cache without having to add RAM to the system. In effect, it acts as a second level cache on flash memory and will especially benefit read-intensive database applications. The Oracle Database Smart Flash Cache white paper concludes: Available at no additional cost, Database Smart Flash Cache on Oracle Solaris and Oracle Linux has the potential to offer considerable benefit to users of Oracle Database 11g Release 2 with disk-bound read-mostly or read-only workloads, through the simple addition of flash storage such as the Sun Storage F5100 Flash Array or the Sun Flash Accelerator F20 PCIe Card. Read the white paper.

  Read the article

• The Best Free Tools for Creating a Bootable Windows or Linux USB Drive

  - by Lori Kaufman

  If you need to install Windows or Linux and you don’t have access to a CD/DVD drive, a bootable USB drive is the solution. You can boot to the USB drive, using it to run the OS setup program, just like a CD or DVD. We have collected some links to free programs that allow you to easily setup a USB drive to install Windows or Linux on a computer. NOTE: If you have problems getting the BIOS on your computer to let you boot from a USB drive, see our article about booting from a USB drive even if your BIOS won’t let you. What Is the Purpose of the “Do Not Cover This Hole” Hole on Hard Drives? How To Log Into The Desktop, Add a Start Menu, and Disable Hot Corners in Windows 8 HTG Explains: Why You Shouldn’t Use a Task Killer On Android

  Read the article

• More information on the Patch Tuesday updates for SQL Server

  - by AaronBertrand

  Last week, Microsoft released a series of patches for all supported versions of SQL Server (from SQL Server 2005 SP3 all the way to SQL Server 2008 R2). The reason for the patch against SQL Server installations is largely a client-side issue with the XML viewer application, and for SQL Server specifically, the exploit is limited to potential information disclosure. A very easy way to avoid exposure to this exploit is simply to never open a file with the .disco extension (these files are likely already...(read more)

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >