Search Results

Search found 61 results on 3 pages for 'lte'.

Page 2/3 | < Previous Page | 1 2 3  | Next Page >

• Corosync :: Restarting some resources after Lan connectivity issue

  - by moebius_eye

  I am currently looking into corosync to build a two-node cluster. So, I've got it working fine, and it does what I want to do, which is: Lost connectivity between the two nodes gives the first node '10node' both Failover Wan IPs. (aka resources WanCluster100 and WanCluster101 ) '11node' does nothing. He "thinks" he still has his Failover Wan IP. (aka WanCluster101) But it doesn't do this: '11node' should restart the WanCluster101 resource when the connectivity with the other node is back. This is to prevent a condition where node10 simply dies (and thus does not get 11node's Failover Wan IP), resulting in a situation where none of the nodes have 10node's failover IP because 10node is down 11node has "given back" his failover Wan IP. Here's the current configuration I'm working on. node 10sch \ attributes standby="off" node 11sch \ attributes standby="off" primitive LanCluster100 ocf:heartbeat:IPaddr2 \ params ip="172.25.0.100" cidr_netmask="32" nic="eth3" \ op monitor interval="10s" \ meta is-managed="true" target-role="Started" primitive LanCluster101 ocf:heartbeat:IPaddr2 \ params ip="172.25.0.101" cidr_netmask="32" nic="eth3" \ op monitor interval="10s" \ meta is-managed="true" target-role="Started" primitive Ping100 ocf:pacemaker:ping \ params host_list="192.0.2.1" multiplier="500" dampen="15s" \ op monitor interval="5s" \ meta target-role="Started" primitive Ping101 ocf:pacemaker:ping \ params host_list="192.0.2.1" multiplier="500" dampen="15s" \ op monitor interval="5s" \ meta target-role="Started" primitive WanCluster100 ocf:heartbeat:IPaddr2 \ params ip="192.0.2.100" cidr_netmask="32" nic="eth2" \ op monitor interval="10s" \ meta target-role="Started" primitive WanCluster101 ocf:heartbeat:IPaddr2 \ params ip="192.0.2.101" cidr_netmask="32" nic="eth2" \ op monitor interval="10s" \ meta target-role="Started" primitive Website0 ocf:heartbeat:apache \ params configfile="/etc/apache2/apache2.conf" options="-DSSL" \ operations $id="Website-one" \ op start interval="0" timeout="40" \ op stop interval="0" timeout="60" \ op monitor interval="10" timeout="120" start-delay="0" statusurl="http://127.0.0.1/server-status/" \ meta target-role="Started" primitive Website1 ocf:heartbeat:apache \ params configfile="/etc/apache2/apache2.conf.1" options="-DSSL" \ operations $id="Website-two" \ op start interval="0" timeout="40" \ op stop interval="0" timeout="60" \ op monitor interval="10" timeout="120" start-delay="0" statusurl="http://127.0.0.1/server-status/" \ meta target-role="Started" group All100 WanCluster100 LanCluster100 group All101 WanCluster101 LanCluster101 location AlwaysPing100WithNode10 Ping100 \ rule $id="AlWaysPing100WithNode10-rule" inf: #uname eq 10sch location AlwaysPing101WithNode11 Ping101 \ rule $id="AlWaysPing101WithNode11-rule" inf: #uname eq 11sch location NeverLan100WithNode11 LanCluster100 \ rule $id="RAND1083308" -inf: #uname eq 11sch location NeverPing100WithNode11 Ping100 \ rule $id="NeverPing100WithNode11-rule" -inf: #uname eq 11sch location NeverPing101WithNode10 Ping101 \ rule $id="NeverPing101WithNode10-rule" -inf: #uname eq 10sch location Website0NeedsConnectivity Website0 \ rule $id="Website0NeedsConnectivity-rule" -inf: not_defined pingd or pingd lte 0 location Website1NeedsConnectivity Website1 \ rule $id="Website1NeedsConnectivity-rule" -inf: not_defined pingd or pingd lte 0 colocation Never -inf: LanCluster101 LanCluster100 colocation Never2 -inf: WanCluster100 LanCluster101 colocation NeverBothWebsitesTogether -inf: Website0 Website1 property $id="cib-bootstrap-options" \ dc-version="1.1.7-ee0730e13d124c3d58f00016c3376a1de5323cff" \ cluster-infrastructure="openais" \ expected-quorum-votes="2" \ no-quorum-policy="ignore" \ stonith-enabled="false" \ last-lrm-refresh="1408954702" \ maintenance-mode="false" rsc_defaults $id="rsc-options" \ resource-stickiness="100" \ migration-threshold="3" I also have a less important question concerning this line: colocation NeverBothLans -inf: LanCluster101 LanCluster100 How do I tell it that this collocation only applies to '11node'.

  Read the article

• Ubuntu Touch Porting - Audio

  - by user205695

  I'm currenty trying to port Ubuntu Touch to the Galaxy s4 International LTE (GI9505/ jfltexx). I've come to the point where I need to create a UCM directory but I don't know where and how I should call it. By "looking at /usr/share/alsa/ucm/apq8064-tabla-snd-card/" is the local Ubuntu PC directory or a directory on the downloaded CM meant? Same thing for "/proc/asound/cards" which should give a hint about what the directory should be called. 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xfb200000 irq 51 1 [NVidia ]: HDA-Intel - HDA NVidia HDA NVidia at 0xfb080000 irq 17 I dont think the directory should be called anything like this. Thanks for the help Robin Kertels

  Read the article

• Estudio de caso: CFO de At&T le apunta a la tecnología para transformar las Finanzas Globales

  - by RED League Heroes-Oracle

  AT&T es una de las pocas multinacionales modernas que han participado de todas las etapas anteriores de la innovación de las telecomunicaciones, de Alexander Graham Bell como inventor solitario, a Bell Labs, a los lanzamientos acelerados en las fundiciones de AT&T. La tecnología es el corazón de todo lo que AT&T hace, incluyendo sus inversiones en innovaciones tecnológicas para permitir que las finanzas de AT&T trabajen más estratégicamente con los negocios para asegurar que las inversiones en las iniciativas de crecimiento sean exitosas. Según John Stephens, Vicepresidente Ejecutivo y director financiero de AT&T, la empresa ha trazado un plan de inversión de tres años para mejorar y aumentar sus redes IP de banda ancha alámbricas e inalámbricas. El plan incluye la implementación del servicio 4G LTE para 300 millones de personas en los Estados Unidos, expansión de IP de banda ancha de alta velocidad a unos 57 millones de hogares de clientes y una expansión de la fibra a 1 millón de clientes corporativos adicionales en su área de servicio de telefonía fija. "La necesidad de velocidad es mayor que nunca, y este proyecto es nuestro paso hacia la innovación para ofrecer tal velocidad," dice Stephens. Como AT&T moderniza su infraestructura global, sus procesos operacionales se hacen tan poderosos como su red. Ha sido una tarea grande y compleja, pero Stephens se complace al decir que el departamento de finanzas de AT&T ha adoptado su papel de catalizador corporativo. Empezó con un concepto simple: "Vamos a hacer que todos hablen en el mismo idioma". Esto llevó a la consolidación de sistemas financieros heredados de las empresas adquiridas. No fue una tarea sencilla, dado que la empresa pasó por más de cinco adquisiciones importantes y un sinfín de otras transacciones. En 2007, AT&T tenía 17 aplicaciones apenas en la función de cuentas por pagar. Hoy, el número se ha reducido a dos. Asimismo, hubo 50 sistemas de reportes gerenciales oficiales y ahora hay tres, con planes de excluir uno de ellos. Al tener un único lenguaje volcado a las Finanzas en toda la empresa, el equipo de finanzas de AT&T ha eliminado las varias versiones de los mismos datos, reduciendo la posible confusión en las discusiones y en las decisiones de estrategia de negocios. Estos pasos también han reducido los costos y aceleraron la toma de decisiones. "Lo lindo de los sistemas es que permiten que la gente talentosa con habilidades analíticas usen su tiempo en esa zona, en vez de gastar tiempo en recolección, agregación y organización de los datos," señala Stephens. "Tenemos un proceso eficiente y eficaz que hace que nosotros, dejemos a la gente libre para dedicarse a aquello en que son realmente buenos. Y tenemos un equipo de alta calidad y ellos están en su mejor punto cuando son capaces de hacer su función para apoyar a la unidad de negocio”AT&T es una de las pocas multinacionales modernas que han participado de todas las etapas anteriores de la innovación de las telecomunicaciones, de Alexander Graham Bell como inventor solitario, a Bell Labs, a los lanzamientos acelerados en las fundiciones de AT&T. La tecnología es el corazón de todo lo que AT&T hace, incluyendo sus inversiones en innovaciones tecnológicas para permitir que las finanzas de AT&T trabajen más estratégicamente con los negocios para asegurar que las inversiones en las iniciativas de crecimiento sean exitosas.  Según John Stephens, Vicepresidente Ejecutivo y director financiero de AT&T, la empresa ha trazado un plan de inversión de tres años para mejorar y aumentar sus redes IP de banda ancha alámbricas e inalámbricas. El plan incluye la implementación del servicio 4G LTE para 300 millones de personas en los Estados Unidos, expansión de IP de banda ancha de alta velocidad a unos 57 millones de hogares de clientes y una expansión de la fibra a 1 millón de clientes corporativos adicionales en su área de servicio de telefonía fija. "La necesidad de velocidad es mayor que nunca, y este proyecto es nuestro paso hacia la innovación para ofrecer tal velocidad," dice Stephens. Como AT&T moderniza su infraestructura global, sus procesos operacionales se hacen tan poderosos como su red. Ha sido una tarea grande y compleja, pero Stephens se complace al decir que el departamento de finanzas de AT&T ha adoptado su papel de catalizador corporativo. Empezó con un concepto simple: "Vamos a hacer que todos hablen en el mismo idioma". Esto llevó a la consolidación de sistemas financieros heredados de las empresas adquiridas. No fue una tarea sencilla, dado que la empresa pasó por más de cinco adquisiciones importantes y un sinfín de otras transacciones. En 2007, AT&T tenía 17 aplicaciones apenas en la función de cuentas por pagar. Hoy, el número se ha reducido a dos. Asimismo, hubo 50 sistemas de reportes gerenciales oficiales y ahora hay tres, con planes de excluir uno de ellos. Al tener un único lenguaje volcado a las Finanzas en toda la empresa, el equipo de finanzas de AT&T ha eliminado las varias versiones de los mismos datos, reduciendo la posible confusión en las discusiones y en las decisiones de estrategia de negocios. Estos pasos también han reducido los costos y aceleraron la toma de decisiones. "Lo lindo de los sistemas es que permiten que la gente talentosa con habilidades analíticas usen su tiempo en esa zona, en vez de gastar tiempo en recolección, agregación y organización de los datos," señala Stephens. "Tenemos un proceso eficiente y eficaz que hace que nosotros, dejemos a la gente libre para dedicarse a aquello en que son realmente buenos. Y tenemos un equipo de alta calidad y ellos están en su mejor punto cuando son capaces de hacer su función para apoyar a la unidad de negocio”

  Read the article

• Reminder - Mobile World Congress - 4 Industry Workshops

  - by michael.seback

  Got 4G? Paving the Road to Profitable and Efficient LTE Network Planning and Monetization, Register by emailing your details here. Achieving Management Excellence through Enterprise Performance Management, Register by emailing your details here. Offer Deliver and Monetize: Mobile Operator Strategies Consumer and Enterprise Services featuring Telenor and Vodafone Groups, Register by emailing your details here. Is Your Head in the Cloud? How to Get it Right the First Time, Register by emailing your details here. With more than 49,000 communications industry attendees, Mobile World Congress is where the industry comes together and you won't want to miss Oracle at this year's show. The 2011 conference agenda will feature speakers representing the leaders of the world's most innovative companies, both from within the Communications industry and from the growing number of adjacent market sectors joining our expanding mobile ecosystem. Join us to learn how Oracle enables innovative services while reducing the cost and complexity of infrastructure software and hardware.

  Read the article

• Orange lance sa première offre 4G pour ses clients entreprises à 79Euro HT par mois

  Orange lance sa première offre 4G pour ses clients entreprises A 79€ HT par mois Hier, Orange a lancé ses premières offres 4G pour ses clients entreprises dans 4 villes : Lyon, Nantes, Lille et Marseille. Son objectif affiché est de faire de même dans une dizaine de villes d'ici avril 2013 La 4G propose une couverture réseau avec un débit maximum théorique allant jusqu'à 150 Mbit/s, « soit 10 fois plus vite qu'en 3G+ » commente l'opérateur qui rappelle que « la H+, qui permet des débits jusqu'à 3 fois plus rapides qu'en 3G+, couvre déjà 60% de la population ». Le déploiement du LTE s'est appuyé sur des partenariats avec Alcatel-Lucent, E...

  Read the article

• Join Companies in Web and Telecoms by Adopting MySQL Cluster

  - by Antoinette O'Sullivan

  Join Web and Telecom companies who have adopted MySQL Cluster to facilitate application in the following areas: Web: High volume OLTP eCommerce User profile management Session management and caching Content management On-line gaming Telecoms: Subscriber databases (HLR/HSS) Service deliver platforms VAS: VoIP, IPTV and VoD Mobile content delivery Mobile payments LTE access To come up to speed on MySQL Cluster, take the 3-day MySQL Cluster training course. Events already on the schedule include:  Location  Date  Delivery Language  Berlin, Germany  16 December 2013  German  Munich, Germany  2 December 2013  German  Budapest, Hungary  4 December 2013  Hungarian  Madrid, Spain  9 December 2013  Spanish  Jakarta Barat, Indonesia  27 January 2014  English  Singapore  20 December 2013  English  Bangkok, Thailand  28 January 2014  English  San Francisco, CA, United States  28 May 2014  English  New York, NY, United States  17 December 2013  English For more information about this course or to request an additional event, go to the MySQL Curriculum Page (http://education.oracle.com/mysql).

  Read the article

• Verizon va lancer un réseau 4G : les autres opérateurs vont-ils devoir suivre ?

  Mise à jour du 09.03.2010 par Katleen Verizon atteint les 50Mbps avec son réseau 4G, en service à la fin de l'année Verizon vient d'annoncer que son réseau 4G LTE (Long Term Evolution) avait passé une série de tests à Boston et à Seattle (depuis août 2009), afin de définir ses performances. Ainsi, des pics de 5O Mb/s ont été atteints en téléchargement, même si dans le monde réel, les chiffres avoisineront les 5-12 Mbps pour le downlink et les 2-5 Mbps pour l'uplink. Diverses actions ont ainsi été testées et réalisées avec succès sur le réseau 4G : le streaming video, le transfert et le téléchargement de fichiers, la navigation en ligne, les appels par VoIP, etc. Le service devr...

  Read the article

• Cannot connect to ethernet port

  - by Jnir

  I'm running Ubuntu 12.04 LTE. I'm trying to connect via ethernet for the first time but have had no success. Ifconfig eth0 returns: eth0 Link encap:Ethernet HWaddr: 00:01:2e:3f:f1:a0 inet6 addr: fe80::201:2eff:fe3f:f1a0 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:68 errors:0 dropped:0 overruns:0 frame:0 TX packets:183 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:8374 (8.3 KB) TX bytes:42944 (42.9KB) Interrupt:16 Base address:0x6c00 /etc/network/interfaces has auto lo iface lo inef loopback auto eth0 iface eth0 inet dhcp sudo /etc/init.d/networking prints: * Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces * Reconfiguring network interfaces... Failed to bring up eth0 [OK]

  Read the article

• Get entry by week number using Django ORM?

  - by e-satis

  I tried something like: MyModel.objects.filter(year__week=1) It doesn't work. For now, I calculate the first day and the last day of the week and then use gte and lte, but it's less than efficient given that SQL comes with a Week function.

  Read the article

• MongoDB equivalent of SQL "OR"

  - by Matt

  So, MongoDB defaults to "AND" when finding records. For example: db.users.find({age: {'$gte': 30}, {'$lte': 40}}); The above query finds users = 30 AND <= 40 years old. How would I find users <= 30 OR = 40 years old?

  Read the article

• Using local proxy to specify used NIC on Windows 7?

  - by Nico

  I'm running Windows 7 and have 2 NIC installed, both are connected to the Internet (nic#1 LTE, nic#2 DSL). Windows 7 will only allow me to specify a binding order and a metric on which interface to chose but i can't specify this on an application level. My Idea was to use a local proxy server and use the proxy server whenever i want to use nic#2. I tried wingate and free proxy, both applications will let me chose the interface i want to use but this setting seems to have no effect? This is how i configured the applications: http://imageshack.us/photo/my-images/69/freeproxysettings.jpg/ http://imageshack.us/photo/my-images/811/wingateproxysettings.jpg/ Is what i'm trying to do in anyway possible?

  Read the article

• phpmyadmin throws a blank page after installing Zend CE server

  - by infotoknowledge

  I installed LAMP on Ubuntu 12.0.4 LTE. Then I installed phpmyadmin. Everything was good. I used phpadmin to do lots of DB administration.... Then I installed Zend CE server. Now, phpmyadmin throws a blank page. No login screen. So, I reinstalled my VPS in the same sequence again. No luck. Same behavior. This time, I installed Apache, Mysql, PHP and Zend server in that order. Then I installed phpmyadmin....Unfortunately, still blank page on phpmyadmin. Any help?...Thanks in advance.

  Read the article

• Hr Tag in IE - remove border

  - by Wayne

  In other browsers except IE7 and lower the hr displays a border around the hr tag which I don't want it to. <!--[if lte IE 7]> <style type="text/css"> hr { margin: -3px 0 0 0; padding: 0; height: 19px; border: none; outline: none; background: url("img/split.png") center no-repeat; } </style> <![endif]--> I've tried this solution, but it still appears to have a border around it. It looks like this: How do I get rid of it?

  Read the article

• need to query MongoDB using php

  - by Mario Villarroel

  I need to query mongodb with something like this: ("something" < X OR "something" = "nll") AND ("someother"X OR "someother"= "nll") AND z=$z AND s=1 I've tried a few things, but can't get it to work, this is what I've tried: find( array( '$or'=array(array("something"=array("$le",$X)),array("something"="nll")), '$or'=array(array("someother"=array("$ge",$X)),array("someother"="nll")) )) But that's getting me the OR overwritten, so I'm lost on that... After diggin a bit more, I assembled this code that seems to be what I need, but doesn't work either: find( array('$and'=array( array( '$or' = array( array("something"=array('$gte'=$X)),array("something"="nll"))), array('$or' = array( array("someother"=array('$lte'=$X)),array("someother"="nll")))),"Z"=$z, "s"="1"); But this doesn't work as it returns zero results and I know for sure that there are more than 2 items that match on the db. (100% certain)

  Read the article

• Writing an optimised and efficient search engine with mySQL and ColdFusion

  - by Mel

  I have a search page with the following scenarios listed below. I was told there was a better way to do it, but not how, and that I am using too many if statements, and that it's prone to causing an error through url manipulation: Search.cfm will processes a search made from a search bar present on all pages, with one search input (titleName). If search.cfm is accessed manually (through URL not through using the simple search bar on all pages) it displays an advanced search form with three inputs (titleName, genreID, platformID) or it evaluates searchResponse variable and decides what to do. If simple search query is blank, has no results, or less than 3 characters it displays an error If advanced search query is blank, has no results, or less than 3 characters it displays an error If any successful search returns results, they come back normally. The top-of-page logic is as follows: <!---SET DEFAULT VARIABLE---> <cfparam name="variables.searchResponse" default=""> <!---CHECK TO SEE IF SIMPLE SEARCH A FORM WAS SUBMITTED AND EXECUTE SEARCH IF IT WAS---> <cfif IsDefined("Form.simpleSearch") AND Len(Trim(Form.titleName)) LTE 2> <cfset variables.searchResponse = "invalidString"> <cfelseif IsDefined("Form.simpleSearch") AND Len(Trim(Form.titleName)) GTE 3> <!---EXECUTE METHOD AND GET DATA---> <cfinvoke component="myComponent" method="simpleSearch" searchString="#Form.titleName#" returnvariable="simpleSearchResult"> <cfset variables.searchResponse = "simpleSearchResult"> </cfif> <!---CHECK IF ANY RECORDS WERE FOUND---> <cfif IsDefined("variables.simpleSearchResult") AND simpleSearchResult.RecordCount IS 0> <cfset variables.searchResponse = "noResult"> </cfif> <!---CHECK IF ADVANCED SEARCH FORM WAS SUBMITTED---> <cfif IsDefined("Form.AdvancedSearch") AND Len(Trim(Form.titleName)) LTE 2> <cfset variables.searchResponse = "invalidString"> <cfelseif IsDefined("Form.advancedSearch") AND Len(Trim(Form.titleName)) GTE 2> <!---EXECUTE METHOD AND GET DATA---> <cfinvoke component="myComponent" method="advancedSearch" returnvariable="advancedSearchResult" titleName="#Form.titleName#" genreID="#Form.genreID#" platformID="#Form.platformID#"> <cfset variables.searchResponse = "advancedSearchResult"> </cfif> <!---CHECK IF ANY RECORDS WERE FOUND---> <cfif IsDefined("variables.advancedSearchResult") AND advancedSearchResult.RecordCount IS 0> <cfset variables.searchResponse = "noResult"> </cfif> I'm using the searchResponse variable to decide what the the page displays, based on the following scenarios: <!---ALWAYS DISPLAY SIMPLE SEARCH BAR AS IT'S PART OF THE HEADER---> <form name="simpleSearch" action="search.cfm" method="post"> <input type="hidden" name="simpleSearch" /> <input type="text" name="titleName" /> <input type="button" value="Search" onclick="form.submit()" /> </form> <!---IF NO SEARCH WAS SUBMITTED DISPLAY DEFAULT FORM---> <cfif searchResponse IS ""> <h1>Advanced Search</h1> <!---DISPLAY FORM---> <form name="advancedSearch" action="search.cfm" method="post"> <input type="hidden" name="advancedSearch" /> <input type="text" name="titleName" /> <input type="text" name="genreID" /> <input type="text" name="platformID" /> <input type="button" value="Search" onclick="form.submit()" /> </form> </cfif> <!---IF SEARCH IS BLANK OR LESS THAN 3 CHARACTERS DISPLAY ERROR MESSAGE---> <cfif searchResponse IS "invalidString"> <cfoutput> <h1>INVALID SEARCH</h1> </cfoutput> </cfif> <!---IF SEARCH WAS MADE BUT NO RESULTS WERE FOUND---> <cfif searchResponse IS "noResult"> <cfoutput> <h1>NO RESULT FOUND</h1> </cfoutput> </cfif> <!---IF SIMPLE SEARCH WAS MADE A RESULT WAS FOUND---> <cfif searchResponse IS "simpleSearchResult"> <cfoutput> <h1>Search Results</h1> </cfoutput> <cfoutput query="simpleSearchResult"> <!---DISPLAY QUERY DATA---> </cfoutput> </cfif> <!---IF ADVANCED SEARCH WAS MADE A RESULT WAS FOUND---> <cfif searchResponse IS "advancedSearchResult"> <cfoutput> <h1>Search Results</h1> <p>Your search for "#Form.titleName#" returned #advancedSearchResult.RecordCount# result(s).</p> </cfoutput> <cfoutput query="advancedSearchResult"> <!---DISPLAY QUERY DATA---> </cfoutput> </cfif> Is my logic a) not efficient because my if statements/is there a better way to do this? And b) Can you see any scenarios where my code can break? I've tested it but I have not been able to find any issues with it. And I have no way of measuring performance. Any thoughts and ideas would be greatly appreciated. Many thanks

  Read the article

• How to install Huawei Mobile broadband EC306?

  - by serviteur

  How to install Huawei Mobile Broadband EC 306 EVDO RevB in Ubuntu 12.04 LTS 64bit ? Best Regards Excuses me for my bad english When I connect the modem on ubuntu, it fails to mount system and furthermore it is not recognized as a CD-ROM. I is not installed Windows on my computer, but I try to open the modem under Windows on a PC friend, There is no script file called "Linux", but only Windows. lsusb : serviteur@creation:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 15d9:0a4c Trust International B.V. USB+PS/2 Optical Mouse Bus 001 Device 007: ID 12d1:1506 Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard dmesg Q: 0 ANSI: 2 [16619.060771] sr1: scsi-1 drive [16619.060955] sr 13:0:0:0: Attached scsi CD-ROM sr1 [16619.061099] sr 13:0:0:0: Attached scsi generic sg3 type 5 [16619.061358] sd 14:0:0:0: Attached scsi generic sg4 type 0 [16619.063654] sd 14:0:0:0: [sdc] Attached SCSI removable disk [16634.224923] usb 1-6: USB disconnect, device number 6 [16638.468041] usb 1-6: new high-speed USB device number 7 using ehci_hcd [16638.586210] option 1-6:1.0: GSM modem (1-port) converter detected [16638.586316] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB0 [16638.586435] option 1-6:1.1: GSM modem (1-port) converter detected [16638.586517] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB1 [16638.586607] option 1-6:1.2: GSM modem (1-port) converter detected [16638.586676] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB2 [16638.586752] option 1-6:1.3: GSM modem (1-port) converter detected [16638.586828] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB3 [16638.586929] option 1-6:1.4: GSM modem (1-port) converter detected [16638.586997] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB4 [16638.587114] option 1-6:1.5: GSM modem (1-port) converter detected [16638.587187] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB5 [16638.646686] option1 ttyUSB5: GSM modem (1-port) converter now disconnected from ttyUSB5 [16638.646706] option 1-6:1.5: device disconnected [16638.660755] scsi15 : usb-storage 1-6:1.5 [16638.663284] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4 [16638.663301] option 1-6:1.4: device disconnected [16638.689043] scsi16 : usb-storage 1-6:1.4

  Read the article

• How do I keep my Huawei E3131 3G modem from unmounting?

  - by John Perez

  I need help getting my Huawei E3131 modem to (consistently) work. I am currently running Ubuntu 12.04.2 and 3G dongles have worked many times before. However, my newly acquired Huawei E3131 is causing problems. When plugged in, Ubuntu detects the device as a CD-ROM and a modem. I can browse the dongle's contents using Nautilus and Network Manager is able to configure and work the dongle out-of-the-box. I can even get to surf. However, within minutes, the connection drops and the CD-ROM is unmounted. I wait about 15 seconds, then the CD-ROM mounts again and Network Manager is able to connect again with short-lived surfing. Rinse, lather and repeat. It's strange that the device mounts as a CD-ROM, but works as a modem, too, suggesting that mode switching happens somewhere. It's not a signal coverage problem, either because I tested the same SIM card using 3 other different dongles (2 ZTEs and another Huawei) and it is only this E3131 that has this problem. If pertinent, the other dongles weren't being detected as CD-ROMs. Output of lsusb Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0ac8:c342 Z-Star Microelectronics Corp. Bus 001 Device 010: ID 12d1:1506 Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard Bus 001 Device 004: ID 0a5c:219b Broadcom Corp. Bluetooth 2.1 Device I tried installing the drivers found here, but no fish. Furthermore, my device is an E3131, but lsusb for some reason detects it as an E398. I'm not sure how that plays a role for this problem, though. I hope someone out there can help me. I'm out of ideas already. Thank you very much!

  Read the article

• Mounting NAS drive with cifs using credentials file through fstab does not work

  - by mahatmanich

  I can mount the drive in the following way, no problem there: mount -t cifs //nas/home /mnt/nas -o username=username,password=pass\!word,uid=1000,gid=100,rw,suid However if I try to mount it via fstab I get the following error: //nas/home /mnt/nas cifs iocharset=utf8,credentials=/home/username/.smbcredentials,uid=1000,gid=100 0 0 auto .smbcredentials file looks like this: username=username password=pass\!word Note the ! in my password ... which I am escaping in both instances I also made sure there are no eol in the file using :set noeol binary from Mount CIFS Credentials File has Special Character chmod on .credentials file is 0600 and chown is root:root file is under ~/ Why am I getting in on the one side and not with fstab?? I am running on ubuntu 12 LTE and mount.cifs -V gives me mount.cifs version: 5.1 Any help and suggestions would be appreciated ... UPDATE: /var/log/syslog shows following [26630.509396] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE [26630.509407] CIFS VFS: Send error in SessSetup = -13 [26630.509528] CIFS VFS: cifs_mount failed w/return code = -13 UPDATE no 2 Debugging with strace mount through fstab: strace -f -e trace=mount mount -a Process 4984 attached Process 4983 suspended Process 4985 attached Process 4984 suspended Process 4984 resumed Process 4985 detached [pid 4984] --- SIGCHLD (Child exited) @ 0 (0) --- [pid 4984] mount("//nas/home", ".", "cifs", 0, "ip=<internal ip>,unc=\\\\nas\\home"...) = -1 EACCES (Permission denied) mount error(13): Permission denied Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) Process 4983 resumed Process 4984 detached Mount through terminal strace -f -e trace=mount mount -t cifs //nas/home /mnt/nas -o username=user,password=pass\!wd,uid=1000,gid=100,rw,suid Process 4990 attached Process 4989 suspended Process 4991 attached Process 4990 suspended Process 4990 resumed Process 4991 detached [pid 4990] --- SIGCHLD (Child exited) @ 0 (0) --- [pid 4990] mount("//nas/home", ".", "cifs", 0, "ip=<internal ip>,unc=\\\\nas\\home"...) = 0 Process 4989 resumed Process 4990 detached

  Read the article

• Isis Finally Rolls Out

  - by David Dorf

  Google has rolled their wallet out for several chains; I see the NFC readers in Walgreen's when I'm sent their for milk.  But Isis has been relatively quiet until now.  As of last week they have finally launched in their two test cities: Austin, and Salt Lake City.  Below are the supported carriers and phones as of now, but more phones will be added later. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} AT&T supports: HTC One™ X, LG Escape™, Samsung Galaxy Exhilarate™, Samsung Galaxy S® III, Samsung Galaxy Rugby Pro™ T-Mobile supports: Samsung Galaxy S® II, Samsung Galaxy S® III, Samsung Galaxy S® Relay 4G Verizon supports: Droid Incredible 4G LTE. Of course iPhone owners have no wallet since Apple didn't included an NFC chip. To start using Isis, you have to take your NFC-capable phone to your carrier's store to get the SIM replaced with a more sophisticated one that has a secure element configured for Isis.  The "secure element" is the cryptographic logic that secures mobile payments.  Carriers like the secure element in the SIM while non-carriers (like Google) prefer the secure element in the phone's electronics. (I'm not entirely sure if you could support both Isis and Google Wallet on the same phone.  Anybody know?) Then you can download the Isis app from Google Play and load your cards.  Most credit cards are supported, and there's a process to verify the credit cards are valid.  Then you can select from the list of participating retailers to "follow."  Selecting a retailer allows that retailer to give you offers via the app. The app is well done and easy to use.  You can select a default payment type and also switch between them easily.  When the phone is tapped on the reader, there are two exchanges of information.  The payment information is transferred, and then the Isis "SmartTap" information which includes optional loyalty number and digital coupons.  Of course the value of mobile wallets comes from the ease of handling all three data types (i.e. payment, loyalty, offers). There are several advertisements for Isis running now, and my favorite is below.

  Read the article

• Test your internet connection - Emtel Fixed Broadband

  Already at the begin of April, I had a phone conversation with my representative at Emtel Ltd. about some upcoming issues due to the ongoing construction work in my neighbourhood. Unfortunately, they finally raised the house two levels above ours, and of course this has to have a negative impact on the visibility between the WiMAX outdoor unit on the roof and the aimed access point at Medine. So, today I had a technical team here to do a site survey and to come up with potential solutions. Short version: It doesn't look good after all. The site survey Well, the two technicians did their work properly, even re-arranged the antenna to check the connection with another end point down at La Preneuse. But no improvements. Looks like we are out of luck since the construction next door hasn't finished yet and at the moment, it even looks like they are planning to put at least one more level on top. I really wonder about the sanity of the responsible bodies at the local district council. But that's another story. Anyway, the outdoor unit was once again pointed towards Medine and properly fixed with new cable guides (air from the sea and rust...). Both of them did a good job and fine-tuned the reception signal to a mere 3 over 9; compared to the original 7 over 9 I had before the daily terror started. The site survey has been done, and now it's up to Emtel to come up with (better) solutions. Well, I wouldn't mind to have an unlimited, symmetric 3G/UMTS or even LTE connection. Let's see what they can do... Testing the connection There are several online sites available which offer you to check certain aspects of your internet connection. Personally, I'm used to speedtest.net and it works very well. I think it is good and necessary to check your connection from time to time, and only a couple of days ago, I posted the following on Emtel's wall at Facebook (21.05.2013 - 14:06 hrs): Dear Emtel, could you eventually provide an answer on the miserable results of SpeedTest? I chose Rose Hill (Hosted by Emtel Ltd.) as testing endpoint... Sadly, no response to this. Seems that the marketing department is not willing to deal with customers on Facebook. Okay, over at speedtest.net you can use their Flash-based test suite to check your connection to quite a number of servers of different providers world-wide. It's actually very interesting to see the results for different end points and to compare them to each other. The results Following are the results of Rose Hill (hosted by Emtel) and respectively Frankfurt, Germany (hosted by Vodafone DE): Speedtest.net result of 30.05.2013 between Flic en Flac and Rose Hill, Mauritius (Emtel - Fixed Broadband) Speedtest.net result of 30.05.2013 between Flic en Flac and Frankfurt, Germany (Emtel - Fixed Broadband) Luckily, the results are quite similar in terms of connection speed; which is good. I'm currently on a WiMAX tariff called 'Classic Browsing 2', or Fixed Broadband as they call it now, which provides a symmetric line of 768 Kbps (or roughly 0.75 Mbps). In terms of downloads or uploads this means that I would be able to transfer files in either direction with approximately 96 KB/s. Frankly speaking, thanks to compression, my choice of browser and operating system I usually exceed this value and I have download rates up to 120 KB/s - not too bad after all. Only the ping times are a little bit of concern. Due to the difference in distance, or better said based on the number of hubs between the endpoints, they indicate the amount of time that it takes to send a package from your machine to the remote server and get a response back. A lower value is better, and usually the ping is less than 300 ms between Mauritius and Europe. The alternatives in Mauritius Not sure whether I should note this done because for my requirements there are no alternatives to Emtel WiMAX at the moment. It would be great to have your opinion on the situation of internet connectivity in Mauritius. Are there really alternatives? And if so, what are the conditions?

  Read the article

• regenerating url in cf9/Coldbox

  - by faheem7860

  Hi I am wondering if there is a way to regenerate the URL when any page is loaded in coldbox/CF9 when using event.buildLink ? Currently I get http://cawksd05.codandev.local:8080/entries/editor when using event.buildlink. But the correct url should have /index.cfm added to it as shown below: /index.cfm/entries/editor Is there a way to set this once and where does this get set as I am confused where to set this for all my pages so that /index.cfm gets added the the url prefix when I do an event.Buildlink. Thanks Faheem // General Properties setUniqueURLS(false); setAutoReload(false); // Base URL if( len(getSetting('AppMapping') ) lte 1){ setBaseURL("http://#cgi.HTTP_HOST#/index.cfm"); } else{ setBaseURL("http://#cgi.HTTP_HOST#/#getSetting('AppMapping')#/index.cfm"); } // Your Application Routes formatConstraints = {format="(xml|json)"}; addRoute(pattern="/api/:format/tasks/completed",handler="tasksAPI",action="list",constraints=formatConstraints,completed=true); addRoute(pattern="/api/:format/tasks",handler="tasksAPI",action="list",constraints=formatConstraints); addRoute(pattern="/api/:format?",handler="tasksAPI",action="invalid"); addRoute(pattern="/tasks/list/:status?",handler="tasks",action="index"); addRoute(pattern=":handler/:action?");

  Read the article

• BasicDBObject or QueryBuilder and some newbie questions of Java and mongo

  - by Kevin Xu

  hi I'm a fresh newbie to mongodb Q1 using query=new BasicDBObject(); query.put("i", new BasicDBObject("$gt",13)); and query=new QueryBuilder().put("i").Greaterthan(13).get() is there any difference inside of the system? Q2 I've created a class class findkv extends BasicDBObject{ //is gt gte lt lte public findkv(String fieldname,String op,Object tvalue) { if (op=="") this.put(fieldname,tvalue); else this.put(fieldname, new BasicDBObject(op,tvalue)); } } shall I use it or shall I just use original function? Q3 I've used mongo shell for a few weeks, and was customed to it, and find writing in mongo shell faster and shorter, which side has more advantage, writing in mongo or in java? I shall dump them from mongo to mysql Q4 I've an if (statement==true) return else dowhat; seems can't be compiled I know I can write if (statement!=true) dowhat else return, but can I still write in first style? q5 my eclipse is Eclipse Java EE IDE for Web Developers. Version: Juno Release Build id: 20120614-1722 I'd like to install Perl which I haven't learned yet I choose Install Update http://e-p-i-c.sf.net/updates/testing but it doesn't work, any method to install perl to eclipse manually?

  Read the article

• getting data from dynamic schema

  - by coure2011

  I am using mongoose/nodejs to get data as json from mongodb. For using mongoose I need to define schema first like this var mongoose = require('mongoose'); var Schema = mongoose.Schema; var GPSDataSchema = new Schema({ createdAt: { type: Date, default: Date.now } ,speed: {type: String, trim: true} ,battery: { type: String, trim: true } }); var GPSData = mongoose.model('GPSData', GPSDataSchema); mongoose.connect('mongodb://localhost/gpsdatabase'); var db = mongoose.connection; db.on('open', function() { console.log('DB Started'); }); then in code I can get data from db like GPSData.find({"createdAt" : { $gte : dateStr, $lte: nextDate }}, function(err, data) { res.writeHead(200, { "Content-Type": "application/json", "Access-Control-Allow-Origin": "*" }); var body = JSON.stringify(data); res.end(body); }); How to define scheme for a complex data like this, you can see that subSection can go to any deeper level. [ { 'title': 'Some Title', 'subSection': [{ 'title': 'Inner1', 'subSection': [ {'titile': 'test', 'url': 'ab/cd'} ] }] }, .. ]

  Read the article

• Is it necessary to var scope loop variables in CFScript?

  - by Mel

  When using CFML and CF9 I usually var scope my loop variables; in this case local.i, for example: <cfloop list="#this.list#" index="local.i"> <cfif Len(local.i) GT 10> // do something </cfif> </cfloop> I recently started converting some stuff into CFScript, and (to my disappointment I found out that there is no way to loop over a list in CFScript) I'm wondering if I should still var scope my loop variables, and how: for (i = 1; LTE ListLen(this.list); i = i + 1 ) { if (Len(ListGetAt(this.list, i) GT 10)) { // do something } } Should I be doing local.i = 1 and local.i = local.i + 1 istead of the sample code in my example? Is it necessary? EDIT: I should also ask if the CFScript form of my CFML loop is correct; I ask because I just noticed that my CFML loop uses a , (comma and space) for the delimiter argument, which seems non-existence in the CFScript version of the loop.

  Read the article

• Processing XML comments in order using SAX & Cyberneko

  - by Joel

  I'm using cyberneko to clean and process html documents. I need to be able to process all the comments that occur in the original html documents. I've configured the cyberneko sax parser to process comments like so: parser.setProperty("http://xml.org/sax/properties/lexical-handler", consumer); ...using the same consumer as I am for DOM events. I get a callback for each of the comments: @Override public void comment(char[] arg0, int arg1, int arg2) throws SAXException { System.out.println("COMMENT::: "+new String(arg0, arg1, arg2)); } The problem I have is that all the comments are processed first, out of context of the DOM. i.e. I get a callback for all the comments before the document head, body etc.... What I'd like is for the comment callbacks to occur in the order they occur in the DOM. Edit: what I'm actually trying to do is parse the instructions for IE in the original html, such as: <!--[if lte IE 6]><body class="news ie"><![endif]--> At the moment they are all dropped, I need to include them in the cleaned HTML document.

  Read the article

< Previous Page | 1 2 3  | Next Page >