Search Results

Search found 93 results on 4 pages for 'muppet geoff'.

Page 2/4 | < Previous Page | 1 2 3 4  | Next Page >

• What does it mean when ARP shows <incomplete> on eth1

  - by Geoff Dalgas

  We have been using HAProxy along with heartbeat from the Linux-HA project. We are using two linux instances to provide a failover. Each server has with their own public IP and a single IP which is shared between the two using a virtual interface (eth1:1) at IP: 69.59.196.211 The virtual interface (eth1:1) IP 69.59.196.211 is configured as the gateway for the windows servers behind them and we use ip_forwarding to route traffic. We are experiencing an occasional network outage on one of our windows servers behind our linux gateways. HAProxy will detect the server is offline which we can verify by remoting to the failed server and attempting to ping the gateway: Pinging 69.59.196.211 with 32 bytes of data: Reply from 69.59.196.220: Destination host unreachable. Running arp -a on this failed server shows that there is no entry for the gateway address (69.59.196.211): Interface: 69.59.196.220 --- 0xa Internet Address Physical Address Type 69.59.196.161 00-26-88-63-c7-80 dynamic 69.59.196.210 00-15-5d-0a-3e-0e dynamic 69.59.196.212 00-21-5e-4d-45-c9 dynamic 69.59.196.213 00-15-5d-00-b2-0d dynamic 69.59.196.215 00-21-5e-4d-61-1a dynamic 69.59.196.217 00-21-5e-4d-2c-e8 dynamic 69.59.196.219 00-21-5e-4d-38-e5 dynamic 69.59.196.221 00-15-5d-00-b2-0d dynamic 69.59.196.222 00-15-5d-0a-3e-09 dynamic 69.59.196.223 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 225.0.0.1 01-00-5e-00-00-01 static On our linux gateway instances arp -a shows: peak-colo-196-220.peak.org (69.59.196.220) at <incomplete> on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-222.peak.org (69.59.196.222) at 00:15:5d:0a:3e:09 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 Why would arp occasionally set the entry for this failed server as <incomplete>? Should we be defining our arp entries statically? I've always left arp alone since it works 99% of the time, but in this one instance it appears to be failing. Are there any additional troubleshooting steps we can take help resolve this issue? THINGS WE HAVE TRIED I added a static arp entry for testing on one of the linux gateways which still didn't help. root@haproxy2:~# arp -a peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-221.peak.org (69.59.196.221) at 00:15:5d:00:b2:0d [ether] on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 peak-colo-196-220.peak.org (69.59.196.220) at 00:21:5e:4d:30:8d [ether] PERM on eth1 root@haproxy2:~# arp -i eth1 -s 69.59.196.220 00:21:5e:4d:30:8d root@haproxy2:~# ping 69.59.196.220 PING 69.59.196.220 (69.59.196.220) 56(84) bytes of data. --- 69.59.196.220 ping statistics --- 7 packets transmitted, 0 received, 100% packet loss, time 6006ms Rebooting the windows web server solves this issue temporarily with no other changes to the network but our experience shows this issue will come back. Swapping network cards and switches I noticed the link light on the port of the switch for the failed windows server was running at 100Mb instead of 1Gb on the failed interface. I moved the cable to several other open ports and the link indicated 100Mb for each port that I tried. I also swapped the cable with the same result. I tried changing the properties of the network card in windows and the server locked up and required a hard reset after clicking apply. This windows server has two physical network interfaces so I have swapped the cables and network settings on the two interfaces to see if the problem follows the interface. If the public interface goes down again we will know that it is not an issue with the network card. (We also tried another switch we have on hand, no change) Changing network hardware driver versions We've had the same problem with the latest Broadcom driver, as well as the built-in driver that ships in Windows Server 2008 R2. Replacing network cables As a last ditch effort we remembered another change that occurred was the replacement of all of the patch cords between our servers / switch. We had purchased two sets, one green of lengths 1ft - 3ft for the private interfaces and another set of red cables for the public interfaces. We swapped out all of the public interface patch cables with a different brand and ran our servers without issue for a full week ... aaaaaand then the problem recurred. Disable checksum offload, remove TProxy We also tried disabling TCP/IP checksum offload in the driver, no change. We're now pulling out TProxy and moving to a more traditional x-forwarded-for network arrangement without any fancy IP address rewriting. We'll see if that helps.

  Read the article

• Make the middle mouse button behave as a double-click in Windows 7?

  - by Geoff Olynyk

  What is the best, lightest-weight way to make the middle mouse button (i.e. clicking the scroll wheel) behave as a double-left-click in Windows 7? I want this to be universal, so that other programs don't ever see the middle-click, they just see a double-left-click. I used to do it under Windows XP with Logitech SetPoint drivers but it was always an ugly solution - installing a huge ( 50 MB!) binary just to enable one simple little bit of functionality.

  Read the article

• Are there any problems migrating users from OSX 10.4.11 server to 10.6.6. server using WGM?

  - by Geoff Hardman

  I have just set up a new Mac server running 10.6.6. Installation went smoothly and all appears ok. Can create a new user through WGM and logon to the server from one of our local client systems. Imported the old users from the 10.4 system using WGM but the new system will not create home directories for these users and will not let them log on. I have read that there are issues using this method but can not find any detail as to why. Not wishing to recreate over 350 users from scratch I am looking for an easier solution. Can anyone help? The new server is 10.6.6. We use Open Directory and AFP. The paths are the same as the old server.

  Read the article

• Windows screen shots via command-line SSH session

  - by Geoff Fritz

  I've browsed the handful of "screen capture" queries here, but I was unable to find anything which addressed my specific need. I'm looking for a command-line tool that I can run via remote SSH connection (by way of the cygwin sshd daemon). There are several to choose from, but the few I've tried (ImageMagick, nircmd, and MiniCap) all result in a blank screen. I assume that this is due to the remotely logged in user not having a proper graphical console session running. The goal here is automate screen capture and retrieval of the main system console (what one would see if they were looking at the physical monitor) through the use of ssh script from a Unix host: ssh user@windowshost "screencap --output /tmp/console.jpg" scp user@windowshost:/tmp/console.jpg /some/destdir Note that these must be done on demand, so polling a remote directory that has snapshots dumped periodically will not work. Bonus points for programs that are open source and have a portable install (so I don't need to RDP/VNC into the machine to run a graphical installer).

  Read the article

• Vista - Profile not Loaded Correctly (Cannot Access Registry)

  - by Geoff

  Every so often, I log on and get the Following Message: User profile was not loaded correctly. You have been logged on with a temporary profile. Changes you make to this profile will be lost when you log off. Please see the event log for details or contact your administrator This almost always happens when somebody else has been on the computer for a while, and then I log on. This never used to happen, but now it happens pretty often. My profile is not permanently corrupted, all I have to do is restart my computer, but this annoys me, and I would like to fix it. I was curios about the reason of this cause, so I looked into the Event Log, and found the root of the problem was the ntuser.dat file in the profile that I was logging on to was locked at logon time. This resulted in the current users registry not being loaded, resulting in failure to load the profile. What could be locking this file? is there any way to get a process list without logging on so that I can identify which process has the file locked? Any other suggestions. Hopefully I can find a solution.

  Read the article

• Windows Server 2008 R2 network adapter stops working, requires hard reboot

  - by Geoff Dalgas

  TL;DR version: Turns out this was a Windows Server 2008 R2 kernel networking bug. After siccing Microsoft support on it, we (eventually) got an unpublished kernel hotfix from Microsoft to address it. If you, too, are experiencing mysterious low-level network driver failures requiring a reboot/bluescreen cycle, you might want that hotfix (or maybe Service Pack 1 whenever it is released, too.) We have been using HAProxy along with heartbeat from the Linux-HA project. We are using two linux instances to provide a failover. Each server has with their own public IP and a single IP which is shared between the two using a virtual interface (eth1:1) at IP: 69.59.196.211 The virtual interface (eth1:1) IP 69.59.196.211 is configured as the gateway for the windows servers behind them and we use ip_forwarding to route traffic. We are experiencing an occasional network outage on one of our windows servers behind our linux gateways. HAProxy will detect the server is offline which we can verify by remoting to the failed server and attempting to ping the gateway: Pinging 69.59.196.211 with 32 bytes of data: Reply from 69.59.196.220: Destination host unreachable. Running arp -a on this failed server shows that there is no entry for the gateway address (69.59.196.211): Interface: 69.59.196.220 --- 0xa Internet Address Physical Address Type 69.59.196.161 00-26-88-63-c7-80 dynamic 69.59.196.210 00-15-5d-0a-3e-0e dynamic 69.59.196.212 00-21-5e-4d-45-c9 dynamic 69.59.196.213 00-15-5d-00-b2-0d dynamic 69.59.196.215 00-21-5e-4d-61-1a dynamic 69.59.196.217 00-21-5e-4d-2c-e8 dynamic 69.59.196.219 00-21-5e-4d-38-e5 dynamic 69.59.196.221 00-15-5d-00-b2-0d dynamic 69.59.196.222 00-15-5d-0a-3e-09 dynamic 69.59.196.223 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 225.0.0.1 01-00-5e-00-00-01 static On our linux gateway instances arp -a shows: peak-colo-196-220.peak.org (69.59.196.220) at <incomplete> on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-222.peak.org (69.59.196.222) at 00:15:5d:0a:3e:09 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 Why would arp occasionally set the entry for this failed server as <incomplete>? Should we be defining our arp entries statically? I've always left arp alone since it works 99% of the time, but in this one instance it appears to be failing. Are there any additional troubleshooting steps we can take help resolve this issue? THINGS WE HAVE TRIED I added a static arp entry for testing on one of the linux gateways which still didn't help. root@haproxy2:~# arp -a peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-221.peak.org (69.59.196.221) at 00:15:5d:00:b2:0d [ether] on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 peak-colo-196-220.peak.org (69.59.196.220) at 00:21:5e:4d:30:8d [ether] PERM on eth1 root@haproxy2:~# arp -i eth1 -s 69.59.196.220 00:21:5e:4d:30:8d root@haproxy2:~# ping 69.59.196.220 PING 69.59.196.220 (69.59.196.220) 56(84) bytes of data. --- 69.59.196.220 ping statistics --- 7 packets transmitted, 0 received, 100% packet loss, time 6006ms Rebooting the windows web server solves this issue temporarily with no other changes to the network but our experience shows this issue will come back. Swapping network cards and switches I noticed the link light on the port of the switch for the failed windows server was running at 100Mb instead of 1Gb on the failed interface. I moved the cable to several other open ports and the link indicated 100Mb for each port that I tried. I also swapped the cable with the same result. I tried changing the properties of the network card in windows and the server locked up and required a hard reset after clicking apply. This windows server has two physical network interfaces so I have swapped the cables and network settings on the two interfaces to see if the problem follows the interface. If the public interface goes down again we will know that it is not an issue with the network card. (We also tried another switch we have on hand, no change) Changing network hardware driver versions We've had the same problem with the latest Broadcom driver, as well as the built-in driver that ships in Windows Server 2008 R2. Replacing network cables As a last ditch effort we remembered another change that occurred was the replacement of all of the patch cords between our servers / switch. We had purchased two sets, one green of lengths 1ft - 3ft for the private interfaces and another set of red cables for the public interfaces. We swapped out all of the public interface patch cables with a different brand and ran our servers without issue for a full week ... aaaaaand then the problem recurred. Disable checksum offload, remove TProxy We also tried disabling TCP/IP checksum offload in the driver, no change. We're now pulling out TProxy and moving to a more traditional x-forwarded-for network arrangement without any fancy IP address rewriting. We'll see if that helps. Switch Virtualization providers On the off chance this was related to Hyper-V in some way (we do host Linux VMs on it), we switched to VMWare Server. No change. Switch host model We've reached the end of our troubleshooting rope and are now formally involving Microsoft support. They recommended changing the host model: http://en.wikipedia.org/wiki/Host_model http://technet.microsoft.com/en-us/magazine/2007.09.cableguy.aspx We did that, and.. we'll see.

  Read the article

• EC2 server in VPC stops responding joining domain

  - by Geoff

  We have a EC2 Windows Server set up and running in our VPC, connected to our network via a Juniper 5GT. This is working well, with the tunnel up and stable. If I then join the server to our local domain, it appears to work - I can then log on using domain credentials, and use domain accounts when applying security to folders etc. After I log out, if I give it around an hour, the box becomes unresponsive. I can't ping it, although a tracert goes all the way barring the last hop - so the tunnel is ok. I can't RDP into it. If I reboot it, then it works for a while before doing the same thing. Un-joining it from the domain fixes the problem, and it stays up and stable. The event logs don't show anything obvious, at least to me. Any ideas?

  Read the article

• Skype status showing always online

  - by Geoff Dalgas

  Skype has recently started showing my online status as constantly "online" even after I have been inactive for longer than the configured time period of 5 minutes. Things that I have tried: Reinstalling Skype on all PCs Disabling all Skype Extras I use the same skype account on my desktop, laptop, and Iphone. Any ideas on why my skype status may be stuck or any other suggestions to help resolve this? UPDATE: I deleted config.xml from %APPDATA%/gdalgas in an attempt to resolve this which didn't help.

  Read the article

• EC2 server in VPC stops responding after joining domain

  - by Geoff

  We have a EC2 Windows Server set up and running in our VPC, connected to our network via a Juniper 5GT. This is working well, with the tunnel up and stable. If I then join the server to our local domain, it appears to work - I can then log on using domain credentials, and use domain accounts when applying security to folders etc. After I log out, if I give it around an hour, the box becomes unresponsive. I can't ping it, although a tracert goes all the way barring the last hop - so the tunnel is ok. I can't RDP into it. If I reboot it, then it works for a while before doing the same thing. Un-joining it from the domain fixes the problem, and it stays up and stable. The event logs don't show anything obvious, at least to me. Any ideas?

  Read the article

• Create new vsftpd user and lock to (specify) home / login directory

  - by Geoff Jackson

  I need to periodically give temporary and limited access to various directories on a CentOS linux server that has vsftp installed. I've created a user using useradd [user_name] and given them a password using passwd [password]. I've created a directory in /var/ftp and then I bind this to the directory that I wish to limit access to. What else do I need to specifically do to ensure that when this user logs into FTP, they only have access to this directory please?

  Read the article

• Move /var directories to to /mnt on an EC2 instance

  - by Geoff Lanotte

  I am trying to work on a standard configuration for a set of EC2 instances running ubuntu 12.04. These servers are going to be primarily web servers for a Ruby on Rails application. When you configure a new large instance, you are given a primary of 8GB and then ephemeral storage of 400 GB that is mounted to /mnt. It seems logical to me to move some directories that have a potential for growth off to the /mnt directory, I was specifically thinking of /var/www and /var/log. My question is two-fold: Is this a good idea or are there pitfalls that I cannot see? If this is a good idea, how should I go about configuring this. I do have the ability to configure new instances and down our old instances. My concern is over long term, doing this in such a way that it prevents downtime. I am a developer with some experience in devops, but mounting drives is something I have not faced before, so explicit directions would be greatly appreciated.

  Read the article

• What is the fastest way to type an en dash in Windows 7?

  - by Geoff Olynyk

  Simple question: What's the quickest way to get an en dash (–, Unicode U+2013 EN DASH) in Windows? Note that this question is for all programs, not just Microsoft Word. Even better if it can be copied to the clipboard as a pure Unicode character, with no formatting information (typeface, etc.) so that when I paste it into Word or Excel or other rich text editors, it doesn't carry its format with it.

  Read the article

• The requested operation has failed! (cannot find answer)

  - by Geoff

  I know this problem is plastered all over the web but I've been searching and trying for hours with no luck. Can someone please give me some help? I originally installed Apache 2.0.64 along with PHP 5.2.17, I went through all of the steps in this tutorial with no luck, I found that the culprit was the LoadModule line. After looking on the internet I found a whole bunch of stuff but a lot of it was referring to PHP 5 and Apache 2.2. Since there seemed to be more info on apache 2.2 I removed apache 2.0.64 and installed 2.2. I added the code to LoadModule in the conf file but I got the same problem. I then followed the steps in this tutorial because it was slightly different with some things I hadn't tried yet but still I get the same problem. If I comment out LoadModule... it works fine but otherwise I get "The requested operation has failed!". This is what I ended up keeping since it works only having to comment one line. LoadModule php5_module "c:/php/php5apache2_2.dll" <IfModule mod_php5.c> AddType application/x-httpd-php .php PHPIniDir "c:/php" DirectoryIndex index.php </IfModule> EDIT: How can I stop getting this error message? UPDATE: Also, please note that I took note of the message in the PHP site that stated if PHP 5.2 was to be run with Apache to use the VC6 and not VC9. I had VC9 so I replaced it with VC6, the file is labeled php-5.2.17-nts-Win32-VC6-x86.zip

  Read the article

• VLC Server Media root

  - by Geoff

  When I run vlc like: vlc -I http I open up users to browse my whole system directory structure. This is too much. For example at the page http://localhost:8080/vlm.html I can click Edit on the Input field, then click Browse. On the pop-up I can continue to click '..'. I want to open this server up so that I can access it remotely, but I do not want to expose my whole system directory structure. How can I restrict the browse functionality to a specific sub-tree?

  Read the article

• New for Your Ears: The Java Spotlight on Embedded Java, JavaFX, Java on Mac, and more

  - by terrencebarr

  Just to let you know there are a bunch of new and interesting podcasts around embedded Java, JavaFX, and Java on Mac OS X available on The Java Spotlight Podcast: Episode 89: Geoff Morton on Java Embedded Episode 88: HTML5 and JavaFX 2 with Gerrit Grunwald Episode 87: Nandini Ramani on JavaFX and Embedded Java Episode 83: Scott Kovatch on Java for Mac OS X Enjoy! Cheers, – Terrence Filed under: Mobile & Embedded Tagged: Embedded Java, JavaFX, Mac OS X, The Java Spotlight Podcast

  Read the article

• 2011 PASS Board Applicants: Adam Jorgensen

  - by andyleonard

  Introduction I am interviewing 2011 PASS Board Nominee Applicants. As listed on the PASS Board Elections site the applicants are: Rob Farley Geoff Hiten Adam Jorgensen Denise McInerney Sri Sridharan Kendal Van Dyke I'm asking everyone the same questions and blogging the responses in the order received. Adam Jorgensen is next up: Interview With Adam Jorgensen 1. What's your day job? I am currently the President of Pragmatic Works Consulting ( http://www.pragmaticworks.com ). I also participate with...(read more)

  Read the article

• 2011 PASS Board Applicants: Kendal Van Dyke

  - by andyleonard

  Introduction I am interviewing 2011 PASS Board Nominee Applicants. As listed on the PASS Board Elections site the applicants are: Rob Farley Geoff Hiten Adam Jorgensen Denise McInerney Sri Sridharan Kendal Van Dyke I'm asking everyone the same questions and blogging the responses in the order received. Kendal Van Dyke is next up: Interview With Kendal Van Dyke 1. What's your day job? I'm a Senior Technical Consultant with Insource Technologies ( http://www.insource.com/ ) in Houston, TX (but I work...(read more)

  Read the article

• 2011 PASS Board Applicants: Denise McInerney

  - by andyleonard

  Introduction I am interviewing 2011 PASS Board Nominee Applicants. As listed on the PASS Board Elections site the applicants are: Rob Farley Geoff Hiten Adam Jorgensen Denise McInerney Sri Sridharan Kendal Van Dyke I'm asking everyone the same questions and blogging the responses in the order received. Denise McInerney is next up: Interview With Denise McInerney 1. What's your day job? I'm a development DBA at Intuit. Intuit provides financial software and services to small business and consumers....(read more)

  Read the article

• Slides and Scripts from SharePoint Cincy 2014

  - by Brian T. Jackett

  Originally posted on: http://geekswithblogs.net/bjackett/archive/2014/06/06/slides-and-scripts-from-sharepoint-cincy-2014.aspx   I was pleased to present at SharePoint Cincy again for the third year.  Geoff and all the organizers do a great job.  My presentation this year was “PowerShell for Your SharePoint Tool Belt”.  Below are my slides and demo scripts.  Thanks for all who attended, I hope you found something that will be useful for you in your work.   Demo PowerShell Scripts   Slidedeck           -Frog Out

  Read the article

• How do I search for a wildcard character in Microsoft CRM 4.0?

  - by Geoff Maybache

  I need to search for accounts in Microsoft CRM, using a wildcard search to get a "contains" search for the user's input. So if the user enters "ABC", I use ConditionOperator.Like and the value "%ABC%". My question is, how would I search for a customer name that contains a percentage sign, such as "100% Great llc"? I can't find a way to escape the %.

  Read the article

• Response.TransmitFile problem

  - by geoff

  I have the following code delivering a file to users when they click on a download link. For security purposes I can't just link directly to the file so this was set up to decode the url and transmit the file. It has been working fine for a while but recently I started having problems where the file will start downloading but there's no indication of how large the file is. Because of this when the download should stop, it doesn't. The file is about 99mb but when I download it, the browser just keeps downloading way beyond 100mb. I don't know what it's downloading but if I don't cancel it, it doesn't stop. So, my question is, is there either an alternative to transmitfile or a way to make sure the size of the file is sent also so that it stops at the right time? I don't want to use writefile because I don't want to load the entire file into memory since it's so large. Thanks. Here is the code: string filename = Path.GetFileName(url); context.Response.Buffer = true; context.Response.Charset = ""; context.Response.Cache.SetCacheability(HttpCacheability.NoCache); context.Response.ContentType = "application/x-rar-compressed"; context.Response.AddHeader("content-disposition", "attachment;filename=" + filename); context.Response.TransmitFile(context.Server.MapPath(url)); context.Response.Flush();

  Read the article

• PHP DOM vs SimpleXML for Atom GData feed parsing

  - by Geoff Adams

  I'm building a library to access the Google Analytics Data Export API. All the data the library accesses is in Atom format and utilises numerous different namespaces throughout. My experiments with the API have used SimpleXML for parsing so far, especially as all I have been doing is accessing the data held within the feed. Now I'm coming to write a library I am wondering whether forging ahead with SimpleXML will be adequate or whether the enhanced functionality of the DOM module in PHP would be of benefit in the future. I haven't written much code for this part of the library yet so the choice is still open. I have read that the PHP DOM module can be a better choice if you need to build an XML DOM on the fly or modify an existing one, but I'm not entirely sure I would need that functionality anyway due to the nature of the API (no pushing data to the server, for instance). SimpleXML is certainly easier to use and I have seen people saying that for read-only situations it is all you need. Essentially the question is, what would you use? Compatibility will not be an issue as the server configuration will match the application's requirements. Is it worth building the library with PHP DOM in mind or should I stick with SimpleXML for now? Update: Here are two examples of the kind of feeds I will be dealing with: Account feed Data feed

  Read the article

• How to determine direction of navigation from IE WebBrowser (IHtmlWindow2 or Javascript)

  - by Geoff Cox

  I'm uisng the WPF Web Browser control and when it fires the Navigating event, the event args always contain NavigationMode.New. It should be set to NavigationMode.Back if the user chooses to 'Go Back' from the web control. So its off to the COM ActiveX control underneath to determine the direction of navigation. I've been looking at IHtmlWindow2 and IHtmlDocument2 and IOmHistory, but don't see anything that happens on navigation to tell me if the navigation is caused by going back, forward, a new address, or a refresh. Since IHtmlWindow and Javascript have the same DOM, maybe someone knows how from Javascript. I've also been looking at the IWebBrowser2 interface, but can't find anything there either. Is there an event or property I need to inspect?

  Read the article

• Haskell typeclass

  - by Geoff

  I have a Haskell typeclass question. I can't munge the syntax to get this (seemingly reasonable) program to compile under GHC. import Control.Concurrent.MVar blah1 :: [a] -> IO ([a]) blah1 = return blah2 :: [a] -> IO (MVar [a]) blah2 = newMVar class Blah b where blah :: [a] -> IO (b a) instance Blah [] where blah = blah1 -- BOOM instance Blah (MVar []) where blah = blah2 main :: IO () main = do putStrLn "Ok" I get the following error message, which kind of makes sense, but I don't know how to fix it: `[]' is not applied to enough type arguments Expected kind `*', but `[]' has kind `* -> *' In the type `MVar []' In the instance declaration for `Blah (MVar [])'

  Read the article

• Silverlight: Determine whether DataContext is inherited or not

  - by Geoff Hudik

  At runtime in a generic fashion (i.e. iterating UIElements) can I determine if a given FrameWorkElement has a non-inherited DataContext property set? I want a list of elements where DataContext was explicitly set, not inherited from higher up in the chain. I thought perhaps GetBindingExpression() would help but so far it has not. Using Silverlight beta 3.

  Read the article

< Previous Page | 1 2 3 4  | Next Page >