Search Results

Search found 23762 results on 951 pages for 'network speed'.

Page 2/951 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Wireless Network Issue, Disconnecting Randomly From Network

  - by Surfer513

  I'm having an odd problem with my wireless network. Here is the background information: Server (Windows Server 2008) 1 to 10 end user machines connecting to the network Layer 3 Access Point (Asus WL-330 gE) connected to ethernet of Server and all machines connect to the network via the AP The end user machines get a connection to the server with no problems initially. But then connections are randomly lost throughout the day to the server/network. The wireless NICs of the machines still see the wireless network but are unable to connect to it. Then after some time the connection is regained automatically. I initially thought there was a problem with this particular AP, but then I took the same make/model AP out of storage and still ran into the problem. Any ideas what could be causing this??? Very confusing that the wireless nics on the end user machines can still see the network but not connect, and that the connections are randomly lost/gained. Thanks in advance!

  Read the article

• Create personal wireless network on laptop

  - by TechGuru

  I have a WiFi Network, now I have connected my laptop to the WiFi Network. And it is working fine I'm able to access the internet via WiFi. But I want to create other network on my laptop so that I can connect my mobile phone to the my laptop network. Means, my laptop is already connected to WiFi network (xyz). Now I want to create one wireless network on my laptop. So that I can connect my mobile phone to laptop network and access the internet on mobile. But I don't want to lost my `laptop and WiFi connection that is already connected. I tried to create the wireless network on my laptop, but when I created my personal wireless network I lost my wifi-laptop connection. I don't know it is possible or not.

  Read the article

• Parsing google site speed in analytics

  - by Kevin Burke

  I'm having a hard time making heads or tails of the Site Speed graphs in Google Analytics. Our site speed is fluctuating wildly from month to month, despite a large sample (the report is "based on 100,000's of visits) and a consistent web set up (static files served from an EC2 instance running nginx behind a load balancer). Here's our site speed, with each datapoint representing a week worth of data. Over this time period we modified our source and HTTP headers to increase our cache hits on static resources by 5x. Why would it fluctuate so much? Is there any way to get more reliable information from those graphs?

  Read the article

• Improving mdadm RAID-6 write speed

  - by BarsMonster

  Hi! I have a mdadm RAID-6 in my home server of 5x1Tb WD Green HDDs. Read speed is more than enough - 268 Mb/s in dd. But write speed is just 37.1 Mb/s. (Both tested via dd on 48Gb file, RAM size is 1Gb, block size used in testing is 8kb) Could you please suggest why write speed is so low and is there any ways to improve it? CPU usage during writing is just 25% (i.e. half of 1 core of Opteron 165) No business critical data there & server is UPS-backed. mdstat is: Personalities : [raid6] [raid5] [raid4] md0 : active raid6 sda1[0] sdd1[4] sde1[3] sdf1[2] sdb1[1] 2929683456 blocks super 1.2 level 6, 1024k chunk, algorithm 2 [5/5] [UUUUU] bitmap: 0/8 pages [0KB], 65536KB chunk unused devices: <none> Any suggestions?

  Read the article

• Download Speed is 0.12 Mbps when tested with servers in U.S, but it is 0.76 Mbps when tested with local servers, normal? [closed]

  - by Graviton

  Feeling that my ISP is cheating my money ( My subscription package is 1 Mbps), I did a speed test on my internet connection using www.speedtest.net. I tried to test the connection speed on two servers, one local ( Malaysia), another in U.S. I found that while the upload speed remain constant, but the download speed is different; 0.76 Mbps for servers in Malaysia, and 0.12 Mbps for servers in U.S. I called the ISP, and they blamed it on the intercontinental signal lost. But how can it be that the speed differs by that much? If it really differs by that much than we should always take a grain of salt of what is advertised as the broadband speed because the advertised speed is not the speed we are getting. No?

  Read the article

• Configure a wireless network that accepts any WPA2-PSK network key

  - by Michel

  I recently bought a UART WiFi module ( this one ) and configured it with right SSID but wrong password( and I don't know what it is ). The problem is that I can't reset this module to its manufacture settings and I can't connect to this module via serial port to configure it with some wire or cable. But I'm sure that my module is trying to connect my access point but with wrong network key ( because in logs of my access point I can see my module that trying to connect but it can't ) So, I wonder to know is there any way to create or configure a network (using some access point or something else) based on WPA2 Personal security that accepts any WPA2-PSK passwords ? Or is there any other solution for this problem ? If no, is there anyway to see what password this module using to connect to that network ? ( If yes, then I can change password of my network to that password and access to this module's admin panel ) I tried create an open network ( without any security key ) but my module just searches for WPA2 based networks ( I think ).

  Read the article

• Not able to access other machines on network

  - by TheVillageIdiot

  Hi I'm running Windows 7 Enterprise (32bit) on my laptop. For some time I'm not able to access other machines using \\192.168.xxx.xxx. I've installed VM Ware player on my machine few days back but I don't remember if it happened just after that or there is some other reason behind it. EDIT:- I've disabled VMWare Bridge Protocol but still no effect. Please help me. PS:- I've used both wireless and wired networks. Network sharing is enabled and I can ping other machines but cannot access network shares. I get following message: \\xxx.xxx.xxx.xxx You might not have permission to use this network resource. Contact the administrator of this server to find out if you have acess permissions. The request is not supported. EDIT (2):- Network Discovery, File and Printer Sharing, Folder sharing are all on.

  Read the article

• Why is it bad to map network drives in Windows?

  - by Beeblebrox

  There has been some spirited discussion within our IT department about mapping network drives. In particular, it has been said that mapping network drives is A Bad Thing and that adding DFS paths or network shares to your (Windows Explorer/Libraries) Favourites is a far better solution. Why is this the case? Personally I find the convenience of z:\folder to be better than \\server\path\folder', particularly with cmd line and scripting (of course I'm not talking about hard-coded links, naturally!). I have tried searching for pros and cons of mapped network drives, but I haven't seen anything other than 'should the network go down, the drive will be unavailable'. But this is a limitation of any network-accessed storage... I have also been told that mapped network drives poll the network when the network resource is unavailable, however I haven't found more information on this. Wouldn't this still be an issue with other network access mechanisms (that is, mapped Favourites) whenever Windows tries to enumerate the file system (for example, when a file/folder picker dialog is opened)? -- Do network drives poll the network any more than a Windows Explorer library/favourite?

  Read the article

• Keep Xubuntu Network Manager from overwriting resolv.conf

  - by leeand00

  How do I keep Xubuntu 11.10 from overwriting resolv.conf everytime I reboot my machine? Everytime I reboot, I get an overwritten resolv.conf that has the words # Generated by Network Manager and no nameservers specified. I ran the following to get rid of Network Manager, but it's still replacing my resolv.conf when I restart the machine. sudo apt-get --purge remove network-manager sudo apt-get --purge remove network-manager-gnome sudo apt-get --purge remove network-manager-pptp sudo apt-get --purge remove network-manager-pptp-gnome

  Read the article

• ATI / AMD HIS HD 7870 Graphics card fan speed below 16% / 20% 26%

  - by Thorsten Niehues

  I bought a AMD / ATI HIS HD 7870 to replace my old HD 4870. I noticed that the fan speed does not scale with the temperature: The fan speed does not get below 28% (read from catalyst / automatic fan speed) If I manually change it in the catalyst to 20% then it has the same speed than 28% : about 900-1000 rpm. With HIS iTurbo i manually can change the fan speed below 20%. But I noticed that changing the fan speed below 16% results in 3200 rpm. This is really stupid and annoying since my PC is a ultra silent PC and all fans are running with about 500 rpm when the PC is idle (windows / musik movies, etc.) Is there any way to change the fan speed to a reasonable speed like 500 rpm by software or hardware adapters (I really don't like to put a poti between the 12V line)

  Read the article

• Site Speed - 5 Quick Reasons You Need Speed

  Google have introduced a new ranking factor called 'site speed' into their search algorithm. From now on, the length of time it takes for your web pages to load will influence your search engine positioning on Google.com. In other words fast websites will be favored over slow websites in its search results.

  Read the article

• Why are two indicator-network versions being worked on?

  - by Daniel Rodrigues

  Some months ago, on the road to Ubuntu Maverick, a new system indicator, network (with connman as a backend), started to be developed. The plan was to get it into UNE and release it with no notifcation area. Unfortunately it didn't make it into the final version. However, continued efforts are still being made to improve it, and I'm getting regular updates. From a blueprint from the last UDS, I read that the plan was to ship no notification area and only indicators. For that, it was defined that nm-applet (backend: NetworkManager) should be ported to the appindicator library. Today I discovered that those efforts are going on and a initial version is available for testing, available from Matt Trudel PPA (Natty only). So, my questions is, to whoever has the necessary info: wouldn't it be easier to join efforts and concentrate the work in just one version (probably NetworkManager backend, as that's the official plan), instead of breaking those efforts apart and hampering both testing and developing? Both indicators are being developed by Canonical engineers, and that really doesn't make much sense. So, any Canonical engineer willing to clarify this?

  Read the article

• 12.04 wired network doesn't work RTL8111/8168B

  - by laket

  its a fresh 12.04 install 64bits. wifi works fine, wired stays off with cable connected and network-manager shows as if cable is disconnected. Turning off networking lights up my network-cards leds, turning networking on shuts off the leds and no communication is possible. I already tried, turning off the network-manager (sudo service network-manager stop) and setting up my eth0 manually, as soon as I switch off the network-manager my leds light up, but after setting up manually eth0 (sudo ifconfig eth0 10.2.10.114 netmask 255.255.0.0 up) the leds turn off again. I am still dual booting with 10.04 where I have no issues at all, leaving the cable connected all time to my notebook and a switch. Here is some hardware info: lshw: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 03 serial: c8:0a:a9:d7:05:97 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8168d-2.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:f0004000-f0004fff memory:f0000000-f0003fff memory:f0010000-f001ffff lspci: 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) ifconfig eth0: eth0 Link encap:Ethernet HWaddr c8:0a:a9:d7:05:97 inet addr:10.2.10.114 Bcast:10.2.255.255 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:42 Base address:0xc000 cat /etc/network/interfaces: (already tried here with and w/o eth0) auto lo eth0 iface lo inet loopback cat /etc/NetworkManager/NetworkManager.conf [main] plugins=ifupdown,keyfile dns=dnsmasq [ifupdown] managed=false Any help is welcome ;) Laket

  Read the article

• Affect on speed of wordpress membership plugins -- currently trying s2member [migrated]

  - by Richard

  I'm taking a look at s2member -- I have it running, and my site is very slow -- it's taking on average about 9 or 10 seconds to load. This is the site: http://richardclunan.net I want to figure out if the s2member plugin is causing it to be slow. And whether there are other faster membership plugins... 3 questions: Are there particular settings or things specific to s2member that I should take care of to ensure s2member doesn't make my site slow? If I deactivate the plugin to test the speed of the site with the plugin deactivated, will that mean I'll have to respecify s2member settings when I reactivate it? After it's reactivated will members' accounts work ok? Anybody have observations on s2member or other wordpress membership site plugins and their affect on site speed?

  Read the article

• How do I ban a wifi network in Network Manager?

  - by Chris Conway

  My wifi connection drops sometimes and, for some reason, Network Manager attempts to connect to my neighbor's network, which requires a password that I don't know. The network in question is not listed in the "Edit Connections..." dialog and I can find no reference to it in any configuration file, but still the password dialog pops up every time my main connection drops. Is there a way to blacklist a wireless network so that the Network Manager will never attempt to connect to it? Or, equivalently, how can I remove the configuration data that causes the Network Manager to attempt to connect to this particular network?

  Read the article

• Adding network share as the system account breaks Win7 backup to network

  - by ChrisBenn

  (On Win7 Ultimate x64 SP1) So I've been using Win7 backup to \192.168.0.100\Backup\main-desktop\ for awhile without issue. Yesterday I tried to setup crashplan to synchronize my dropbox folder and a network share. I then found out that crashplan, as it runs under the system account, can't see my user mapped drives. So I created a startup script net use O: \192.168.0.100\Documents /USER:192.168.0.100\username password and set it to run, on startup, after the network interface is up, as the system account. (the username & password are the same for the net use script above, the locally logged in user, and the explicit username/password entered in windows backup). I woke up this morning to find error flags from the windows backup and get "Network location cannot be used" (0x800704B3). If I disable the startup task & reboot then windows backup works fine. I'm not sure why having a mapped drive for another user is killing windows backup (same server, different folder). I can work around the issue by using another program to synchronize the two folders, but I'm completely in the dark as to why this happens (and it's 100% repeatable). Uninstalling the crashplan client doesn't change anything - it's the net use run under the system account that breaks win7 backup (to a network location).

  Read the article

• Which network performance management software do you use?

  - by Jamie Keeling

  Hello, I am looking at the various options available for network performance management software, some of the solutions I've found so far are: Proprietary: HP - ProCurve Universal: SolarWinds - Orion Open Source: OpenNMS I am trying to discover the benefits of each package over the other and reasons as to why you would go for one (Such as size of the network, overall cost etc..). I'm curious as to which ones other people use and why? Each customer has their own needs and requirements and it would be great to hear some of yours. Thank you for your time.

  Read the article

• Combining a wired network with an ad-hoc network

  - by Eikern

  I have two Windows Vista computers (A & B) with an ad-hoc network connecting them. Can I somehow then connect computer C with A through a switch/router and have all three computers on "one" network?

  Read the article

• Getting Xbox Live via a wired network with my laptop that has internet access wirelessly

  - by Alex Franco

  I'm running the latest version (as of yesterday anyways) of Ubuntu Desktop 64bit, but installed on my laptop if it makes a difference. I had Windows 7 preinstalled when i bought it and it worked fine with the wireless from my house and bridging the connection with a LAN to my xbox for Live. Now with Ubuntu I tried the same setup, but I'm unfamiliar with Ubuntu so I didn't get far. Best I got so far is wireless internet on my laptop and a wired connection to the xbox that continually connects and disconnects. Heres my network settings. if theres fields not included its because theyre empty on mine or theyre my MAC address or network password Wireless Network 1 settings: Connect Automatically: Checked. Available to all Users: Checked Wireless: SSID: Franco's Mode: Infrastructure MTU: Automatic IPv4 Settings: Method: Automatic (DHCP) IPv6 Settings: Method: Automatic Wired Network 1: Connect Automatically: Checked Available to all Users: Checked Wired: MTU: Automatic IPv4 Settings: Method: Automatic (DHCP) IPv6 Settings: Method: Automatic Any help would be greatly appreciated. EDIT: 6:26pm It seems to be staying connected now. Doing the Network test on my xbox it pickups the network, but cannot detect any PC. Restarting the Xbox, however, leaves my computer unable to connect bringing up the Wire Network disconnected 'blip' every minute or so again. Before I had restarted the Xbox it said "Connected 100 MB/s". Now it only says "connecting". I did have my computer and xbox on in this Wired Network Disconnected blip cycle for a long period of time so it may have finally connected, just without the ability to detect my laptop. I left for 2 hours or so in the middle of typing up the original question. I finished posting this when i got back and then tried to mess with it a bit again, in case youre wondering why i didnt include this before... I've said too much. Forgive my long-winded fingers :p

  Read the article

• Optimize css vs Google page speed is messing with me

  - by The Disintegrator

  I'm using google page speed and it's telling me my css is inefficient... Very inefficient rules (good to fix on any page): * table.fancy thead td Tag key with 2 descendant selectors and Class overly qualified with tag * table.fancy tfoot td Tag key with 2 descendant selectors and Class overly qualified with tag The css rules are table.fancy {border: 1px solid white; padding:5px} table.fancy td {background:#656165} table.fancy thead td, table.fancy tfoot td {background:#767276} I want the header and footer in a different background color than the body of the table (a data table) On what grounds this is inefficient? How to make it more efficient? I will not add a class to the thead and tfoot for googles's sake.

  Read the article

• Basic C++ Speed (initialization vs adding) and comparison speed

  - by seld

  I was curious if anyone knows which of the following executes faster (I know this seems like a weird question but I'm trying to shave as much time and resources as possible off my program.) int i; i+=1; or int i; i=1; and I also was curious about which comparison is faster: //given some integer i // X is some constant i < X+1 or i<=X

  Read the article

• Computer Studdering When Transferring Over Network

  - by Nalandial

  This is a really weird problem that I've never even seen before. When I copy to or from my server share, my computer studders terribly and the data transfers very slowly at only around 12MB/s. By studdering I mean the mouse skips around and all my applications respond very slowly; as soon as I cancel the transfer it resolves immediately. I looked at Task Manager and the CPU is only at ~35% with plenty of RAM free. This only started semi-recently; before, I had no problems and the transfer speed maxed out the gigabit connection. I have two hard drives in my computer. When I try transferring files between drives it's fine, but when I copy from the share to either drive or to it from either drive, I get studdering. I'm running Windows 7 x64. Anyone have any idea what's going on? Any help would be much appreciated.

  Read the article

• Is there a way to tell what the download speed is from a site/server

  - by Memor-X

  i'm looking into which ISP i should go with at the place i'm moving into, one ISP which i have been told good things about has data limits (which when breached will drop your speed to dial-up speed) but multiple memberships which, apart from the cheapest membership, have the same data limits (the cheapest has a 10GB data limit) in their fine print, they say that each different membership has different port speeds, one particular part jumps out at me These speeds are the NBN (National Broadband Network) port speed and not the actual Internet data speed which will vary based on numerous factors including destination you are reaching, your network equipment, network congestion etc. i plan to use the net to download DLC and patch updates for games (particular the insanely large update for the Wii U) and games from Steam (if i find any good one other than this one JRPG) and downloading development resources from free sites like Deposit Files and Mediafire since one membership with a 1000GB data limit is $145 with the port speed being 12Mbps/1Mbps (cheapest) while another with the same limit is $190 with the port speed of 100Mbps/40Mbps (expensive) i am wondering how i can tell what the speed coming from site is since i don't want to be wasting money on speed that makes no difference (unlike memory which i rather have to spare) NOTE: the speeds are for a fiber optic network which where my new place is can only connect via fixed wireless which i may not be able to get with this ISP but if i can get this network then good NOTE 2: most of the resources i get from Deposit Files are always about 200 MB or less, if a resource pack is greater then it's split into multiple archives (like .7z.part) while Mediafire i have to see one bigger than 150MB NOTE 3: one update patch for a PS3 game is close to 4 GB (Disgaea 4) which i need to get access to the DLC and on the weekend i downloaded 5 GB for the Final Fantasy XIV Open Beta for the PS3 which took almost 5 hours

  Read the article

• Virtualbox completely disabled my ethernet and wireless network connections

  - by Tawani

  After installing VirtualBox 3.1.6 for Windows, my computer's network connections were completely disabled. The wireless isn't working, not even the ethernet landline. Even "ipconfig" doesn't seem to respond to any commands. Can anybody help?

  Read the article

• System monitor network speed monitor not working for LAN but works for my Wi-fi

  - by Pavak

  I'm on Ubuntu 13.10. I generally use wi-fi to connect to the internet. But Yesterday my wi-fi router occurred some problem and now it's out for warranty. So temporarily I'm using LAN. System monitor displayed the network speed correctly when I was in wi-fi. But now it's not showing any kinda network speed in System Monitor. I checked the preferences opption but couldn't find a way. I also checked "ksysguard"(KDE's system monitor) and conky. None of them working. How can i solve this? I'm attaching a screenshot to clear the problem.

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >