Search Results

Search found 145 results on 6 pages for 'optimus pwn'.

Page 2/6 | < Previous Page | 1 2 3 4 5 6  | Next Page >

• Should I switch my graphics mode in the BIOS to avoid using Bumblebee?

  - by Fawkes5

  I have just purchased a Acer 3830TG, the timeline X series. To my surprise I found out that there is no first-party support for nvidia optimus for linux. Bumblebee works great, but the battery life from the graphics card always running is not so great. I don't use linux for games so i don't really need the graphics card on, I have Windows for that. In my bios, I have the ability to change my graphics mode from switchable to integrated. If I do this, reinstall ubuntu, what will happen? Will my nvidia card just turn off? Will everything work properly, as if i'm not running an optimus laptop? Is this recommended as opposed to dealing with bumblebee? What is the best thing I could do?

  Read the article

• Kernel freezes with nvidia optimus and bumblebee on 12.04

  - by piovisqui

  I have a Sony VAIO with Intel i7-3520M and NVIDIA Corporation GK107M [GeForce GT 640M LE]. I installed bumblebee and nvidia drivers. They work almost fine, but the system freezes like in a kernel panic once every day. I can play Dota 2 with primusrun on it with 20-30fps 1080p. But when I do something simple as expanding the KDE calendar widget from the bottom right corner, the system hangs a lot and windows borders get another border. The system freezes in not very intensive graphic tasks, for instance, ALT+TAB with KWin effects or pressing ALT+F2 for poping up the launcher. How can I solve this? Info: I use KDE. Couldn't paste de logs here, check at pastebin: http://pastebin.com/SBet8fRQ

  Read the article

• T420 Triple Head with Optimus

  - by Rolo

  I see that this is possible on a T520 apparently (Triple-head on a Lenovo T520), but I can't see anyone claiming it's possible on a T420. I'm running 12.04 and have Bumbleebee installed and working fine but I can't get the display port monitor to display anything. The power light flicks on, but things only render on my VGA output monitor, and Ubuntu's display settings don't detect the third monitor. I'm not concerned with power management, ie, am happy to leave set on discrete graphics in the BIOS if that helps. Is this possible? Thanks.

  Read the article

• Optimus Bumblebee Performance

  - by Chance

  After installing Ubuntu 12.04 and Bumblebee, I tested out the performance of the Nvidia card using Minecraft and a few other games. I've noticed it to be way slower than it was on Windows 7. Is this normal? I'm using the GT 630m. From what I've read online, nobody has said it to be slower than Windows. I'm just really curious because I want to use Linux so much more than Windows, but if I don't get the same performance I feel really picky. The Nvidia card is still faster than my Intel graphics on Ubuntu, but it's not as fast as it was for my on Windows. I get 60 - 80 fps on Minecraft on windows, while I get 28 - 48 fps on Ubuntu. Any Ideas why? Thanks so much!

  Read the article

• How to setup HDMI output on m11x with Nvidia GeForce GT 540M? (Bumblebee) Help?

  - by Alexander Tritan

  I have an Alienware m11x with Optimus Technology. I setup (Fresh Install) Ubuntu 12.04 with bumblebee as below. Please help me set up the HDMI output so that I can connect it to my monitor. $ uname -a Linux ubuntu 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux $ lspci | grep -i vga 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev a1) $ dpkg --get-selections bumblebee install bumblebee-nvidia install $ bumblebeed -version bumblebeed --version bumblebeed (Bumblebee) 3.0 Copyright (C) 2011 The Bumblebee Project Should xrandr normally show HDMI? $ xrandr -q Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 256mm x 144mm 1366x768 60.0*+ 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) $ cat /etc/X11/xorg.conf Section "ServerLayout" Identifier "Layout0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" Option "NoLogo" "true" Option "ConnectedMonitor" "DFP" EndSection $ cat /etc/bumblebee/xorg.conf.nvidia Section "ServerLayout" Identifier "Layout0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" Option "NoLogo" "true" Option "ConnectedMonitor" "DFP" EndSection $ cat /etc/bumblebee/xorg.conf.nouveau Section "ServerLayout" Identifier "Layout0" Screen "Screen0" Option "AutoAddDevices" "true" EndSection Section "Device" Identifier "Device0" Driver "nouveau" EndSection Section "Screen" Identifier "Screen0" Device "Device0" EndSection and finally the biggest config file below: $cat /etc/bumblebee/bumblebee.conf [bumblebeed] VirtualDisplay=:8 KeepUnusedXServer=true ServerGroup=bumblebee TurnCardOffAtExit=false NoEcoModeOverride=false Driver= [optirun] VGLTransport=proxy AllowFallbackToIGC=false PMMethod=none [driver-nvidia] KernelDriver=nvidia-current Module=nvidia PMMethod=none LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current XorgModulePath=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules XorgConfFile=/etc/bumblebee/xorg.conf.nvidia [driver-nouveau] KernelDriver=nouveau PMMethod=none XorgConfFile=/etc/bumblebee/xorg.conf.nouveau Any ideas on setting up the Optimus to output to the HDMI T.V.? I want to enable my HDMI with my GeForce GT 540M.

  Read the article

• bumblebee does not work with metacity and KWin, but works with compiz

  - by cpu2

  If I try to launch something with optirun under compiz, it works. If I try to launch something with optirun under KDE or metacity, it gives me: [ 247.384077] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) [ 247.384117] [ERROR]Aborting because fallback start is disabled. If it matters, I'm trying to launch Portal 2 with wine I have: Nvidia GeForce GT540M with optimus Acer Aspire Timeline X Intel core i5 and 3000 Integrated Graphics

  Read the article

• NVIDIA Geforce gt 555m driver install problem

  - by mir

  I recently installed ubuntu 12.04 on my asus N55SF, which runs nvidia geforce gt 555m and an integrated graphics, via optimus but after installation i found no such thing on ubuntu. i went o nvidia website and installed the driver from there(ver 259.59 i guess) after reboot, i was stuck at 640x480 resolution and my card was still undetected i reinstalled ubuntu but this time i installed bumblebee, but the system settings still shows the graphics as 'unknown' i dont know whether the driver has been installed or not, but from the 'unknown' i figure its not there. when i run sudo nvidia-settings i get this msg "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run nvidia-xconfig as root), and restart the X server." however i can run the settings page by sudo nvidia-settins -c :8 i just want to know why ubuntu hasnt still detected the gpu? is it because bumblebee disables it? and i forgot one v important thing..I AM A NOOB :(

  Read the article

• How can I enable Unity 3d after installing Bumblebee? GLX Problems

  - by ashley

  I'm new to Ubuntu, I'm running 12.04 64 Bit on a Dell XPS L207x with a Nvidia GT555M card. From what I could understand online I needed to install Bumblebee to get the most out of the Optimus system and better battery life. I can test the Bumblebee is working by running optirun glxgears for example. If I run just glxgears then I get the following error Error: couldn't get an RGB, Double-buffered visual. I'm also unable to run Unity 3d, which I would very much like. I'd greatly appreciate any and all help, please be gentle.

  Read the article

• nvidia GT 525m no screen found

  - by Pavan

  I'm a Dell XPS user with nvidia GT 525M with Optimus. When I installed nvidia I was greeted with blank screen. And the error in nvidia log was "Fatal error : No screen found". So after searching for the solutions I figured that I have to insert "BusID" in xorg.conf file. After rebooting I was again greeted with blank screen with error "Fatal error : screen already occupied". I don't what exactly the problem is. Do I need to blacklist Intel inbuilt graphics to nvidia in my machine or anything else needs to be done? Please guide me.

  Read the article

• Giant battery consumption with dual graphics solution (only i-gpu working)

  - by Noel

  I use a Laptop with Intel Core i7 SandyBridge and integrated Intel HD3000 graphics as well as a Nvidia Geforce GTS 555M. So far, I got the impression my Laptop was running with the Nvidia graphics adapter only because the fan was always running on highest speed (and loudest noise) and it was getting very hot even when doing nothing. Also the battery is empty after ~40-50 minutes (while having ~4-5 hours with Intel graphics in Win7). Since this can't be healthy I wanted to switch to the integrated graphics instead. I was fairly surprised when the System Information showed me that the as graphics adapter I use "Intel M". Why is my battery empty so fast with Ubuntu? Without using the NVIDIA graphics adapter? Summary: I DONT WANT to use the Nvidia graphics adapter (OPTIMUS), I just want the Intel solution. As I have understood, the Intel solution is running already, emptying my battery 10x as fast as Win7. What is wrong? Any ideas?

  Read the article

• ASUS X53S Intel Graphics and Unity 3D

  - by Nordlöw

  I just bought a ASUS X53S. Everything works flawlessly except that I can't run Unity 3D on it because NVIDIA Linux drivers currently doesn't support Optimus. So I'm stuck with the other integrated Intel Graphics Adapter. I'm already installed BumbleBee but it doesn't help with Unity 3D thing. Will the Xorg driver ever support OpenGL and especially GLX_texture_from_pixmap so that Unity 3D will work with it? The Intel driver is really snappy with Unity 2D and seems to support most other X acceleration features such as smooth scrolling.

  Read the article

• Ubuntu 14.04 + nvidia-331-updates makes a blank desktop screen

  - by Achint

  I upgraded my installation from 13.10 to 14.04. The problem is that whenever I install the Nvidia drivers from the GUI, upon reboot or trying to login again it only shows the wallpaper of my desktop and nothing else. The mouse does move around, but nothing works. I am unable to open a terminal or do anything else. If I go into the tty console and purge the drivers, then things seem to work again. I have an Optimus setup, with an onboard Intel and discrete Nvidia GTX770M card. It's a 64-bit architecture. I really need to work with CUDA, and was hopeful after hearing that nvidia-prime was released, but this is a real downer. Any help on this?

  Read the article

• optirun fails in Ubuntu 12.10

  - by chiloxsan

  I am trying to use Nvidia Optimus on my laptop by using Bumblebee, I have an Intel Core i5 with an Nvidia Geforce GT 630M. I have followed the instructions on the wiki page at https://wiki.ubuntu.com/Bumblebee, but when trying to run optirun with Firefox (or any other program, like glxspheres), I get the following error: [ 1921.452820] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver [ 1921.452905] [ERROR]Aborting because fallback start is disabled. I have tried googling the issue but I couldn't find any solution that didn't cause more problems. Thank you for your time. Here is my bumblebee.conf: http://paste.ubuntu.com/1333324/

  Read the article

• unable to load nvidia(bumblebee) in ubuntu 14.04 (only nouveau loads)

  - by Ubuntuser

  Bumblebee stopped working on my system after upgrading to stable version of Ubuntu 14.04. DUring installation I get this error rmmod: ERROR: Module nouveau is in use Setting up bumblebee (3.2.1-90~trustyppa1) ... Selecting 01:00:0 as discrete nvidia card. If this is incorrect, edit the BusID line in /etc/bumblebee/xorg.conf.nouveau . bumblebeed start/running, process 11133 Processing triggers for initramfs-tools (0.103ubuntu4.1) ... update-initramfs: Generating /boot/initrd.img-3.14.1-031401-generic Setting up bumblebee-nvidia (3.2.1-90~trustyppa1) ... Selecting 01:00:0 as discrete nvidia card. If this is incorrect, edit the BusID line in /etc/bumblebee/xorg.conf.nvidia rmmod: ERROR: Module nouveau is in use bumblebeed start/running, process 18284 It says nouveau is in use. I checked the loaded modules lsmod | grep nouveau nouveau 1097199 1 mxm_wmi 13021 1 nouveau ttm 85115 1 nouveau i2c_algo_bit 13413 2 i915,nouveau drm_kms_helper 52758 2 i915,nouveau drm 302817 7 ttm,i915,drm_kms_helper,nouveau wmi 19177 3 dell_wmi,mxm_wmi,nouveau video 19476 2 i915,nouveau However, I have nouveau in my blacklist cat /etc/modprobe.d/blacklist.conf | grep nouveau blacklist nouveau blacklist lbm-nouveau alias nouveau off alias lbm-nouveau off My grub is also set to nomodeset cat /etc/default/grub | grep nomodeset GRUB_CMDLINE_LINUX_DEFAULT="nomodeset quiet splash" My graphics card is nvidia optimus lspci | grep -i vga 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 01:00.0 VGA compatible controller: NVIDIA Corporation GT218M [GeForce 310M] (rev ff) I've raised a bug in launchpad: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1327598 Note: Nvidia-prime is working for me (partially). Frequent mouse locks. Interestingly, bumblebee works perfectly fine on my fedora 20 partition on this same laptop.

  Read the article

• Drivers for NVIDIA 520M not working in Ubuntu 12.04

  - by Don

  I am aware that this is nominally a duplicate question, however I've read the other questions and haven't been able to resolve my problem after many hours and attempts, so please don't delete it. Additionally, it seems like many answers to the other questions are specifically dependent on certain situations. My situation being different from the others I found represented, here's my question. Until last night, I had Ubuntu 12.04 installed with Wubi, and it ran ok, though slowly and with occasional hangs. So I partitioned the drive and installed 12.04 in its own partition. Now when I start it, I am stuck using 2D. I believe this is an NVIDIA bug. My NVIDIA card is a GT 520M and my machine has Optimus. Additional Drivers only displays my wireless driver. Going to System Settings Details Graphics shows Driver:Unknown, Experience:Standard. I downloaded the driver from the NVIDIA website, and ran the installer with no errors, except that the "distribution-provided pre-install script failed". After rebooting, my screen was stuck at 640X480, which was fixed by editing /etc/X11/xorg.conf However, I still was stuck in 2D, and nothing else had changed either. A thread suggested something called Bumblebee. I tried that, and when I ran optirun firefoxI got a frozen blank screen. Following another suggestion, I checked the BIOS to try and disable Optimus. I found and ran myriad other commands to try and fix the problem and nothing changed. Now I have just done a clean re-install of Ubuntu. From there, I: Installed all the updates Downloaded the NVIDIA driver Installed it Got screen stuck at 640X480, fixed in xorg.conf. To recap the problem: I can't get the NVIDIA drivers working I am stuck using 2D I'm an idiot I think if the first one is solved, the solution to the second will naturally follow. If you need me to provide any other information, I'd be happy to. From what I've seen in other threads, I think this information may help: lsmod: dh@donsMachine:~$ lsmod Module Size Used by nvidia 12353161 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_realtek 223867 1 joydev 17693 0 parport_pc 32866 0 ppdev 17113 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep snd_hda_intel 33773 3 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event lib80211_crypt_tkip 17390 0 wl 2568210 0 lib80211 14381 2 lib80211_crypt_tkip,wl snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device psmouse 87692 0 serio_raw 13211 0 i915 468745 2 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm drm_kms_helper 46978 1 i915 drm 242038 3 i915,drm_kms_helper mei 41616 0 i2c_algo_bit 13423 1 i915 mxm_wmi 12979 0 acer_wmi 28418 0 sparse_keymap 13890 1 acer_wmi video 19596 1 i915 wmi 19256 2 mxm_wmi,acer_wmi mac_hid 13253 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp tg3 152032 0 sdhci_pci 18826 0 sdhci 33205 1 sdhci_pci lspci -nn | grep VGA dh@donsMachine:~$ lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:0df7] (rev a1) lshw dh@donsMachine:~$ sudo lshw [sudo] password for dh: donsmachine description: Notebook product: EasyNote TS44HR () vendor: Packard Bell version: V1.12 serial: LXBWZ02017134209D71601 width: 64 bits capabilities: smbios-2.7 dmi-2.7 vsyscall32 configuration: boot=normal chassis=notebook uuid=16FE576B-CA15-11E0-B096-B870F4E51243 *-core description: Motherboard product: SJV50_HR vendor: Packard Bell physical id: 0 version: Base Board Version serial: Base Board Serial Number slot: Base Board Chassis Location *-firmware description: BIOS vendor: Packard Bell physical id: 0 version: V1.12 date: 07/11/2011 size: 1MiB capacity: 2496KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb biosbootspecification *-memory description: System Memory physical id: 1b slot: System board or motherboard size: 4GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NS-CG vendor: Nanya Technology physical id: 0 serial: 598E126E slot: ChannelA-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: DIMM [empty] physical id: 1 slot: ChannelA-DIMM1 *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NS-CG vendor: Nanya Technology physical id: 2 serial: 159E126C slot: ChannelB-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: DIMM [empty] physical id: 3 slot: ChannelB-DIMM1 *-cpu description: CPU product: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz vendor: Intel Corp. physical id: 2e bus info: cpu@0 version: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz slot: CPU1 size: 2GHz capacity: 4GHz width: 64 bits clock: 1333MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx lahf_lm arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=2 enabledcores=2 threads=4 *-cache:0 description: L1 cache physical id: 30 slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through instruction *-cache:1 description: L2 cache physical id: 31 slot: L2 Cache size: 256KiB capacity: 256KiB capabilities: synchronous internal write-through unified *-cache:2 description: L3 cache physical id: 32 slot: L3 Cache size: 3MiB capacity: 3MiB capabilities: synchronous internal write-through unified *-cache description: L1 cache physical id: 2f slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through data *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:2000(size=4096) memory:d0000000-d10fffff ioport:a0000000(size=301989888) *-display description: VGA compatible controller product: NVIDIA Corporation vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:d0000000-d0ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:2000(size=128) memory:d1000000-d107ffff *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:43 memory:d1400000-d17fffff memory:c0000000-cfffffff ioport:3000(size=64) *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei latency=0 resources: irq:42 memory:d1a04000-d1a0400f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:d1a0a000-d1a0a3ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:44 memory:d1a00000-d1a03fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 memory:9fb00000-9fbfffff ioport:d1800000(size=1048576) *-network description: Ethernet interface product: NetLink BCM57785 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: b8:70:f4:e5:12:43 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 firmware=sb latency=0 link=no multicast=yes port=twisted pair resources: irq:16 memory:d1830000-d183ffff memory:d1840000-d184ffff memory:d1850000-d18507ff *-generic:0 description: SD Host controller product: NetXtreme BCM57765 Memory Card Reader vendor: Broadcom Corporation physical id: 0.1 bus info: pci@0000:02:00.1 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=sdhci-pci latency=0 resources: irq:17 memory:d1800000-d180ffff *-generic:1 UNCLAIMED description: System peripheral product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0.2 bus info: pci@0000:02:00.2 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1810000-d181ffff *-generic:2 UNCLAIMED description: System peripheral product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0.3 bus info: pci@0000:02:00.3 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1820000-d182ffff *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: b4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 memory:d1900000-d19fffff *-network description: Wireless interface product: BCM43225 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 01 serial: 68:a3:c4:44:81:96 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 ip=192.168.0.12 latency=0 multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d1900000-d1903fff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:d1a09000-d1a093ff *-isa description: ISA bridge product: HM65 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 04 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 logical name: scsi1 version: 04 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:41 ioport:3098(size=8) ioport:30bc(size=4) ioport:3090(size=8) ioport:30b8(size=4) ioport:3060(size=32) memory:d1a08000-d1a087ff *-disk description: ATA Disk product: ST9500325AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 0001 serial: S2W1AMSX size: 465GiB (500GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=a45f21e9 *-volume:0 description: Windows NTFS volume physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 3.1 serial: 46aa-2a25 size: 19GiB capacity: 20GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:00 filesystem=ntfs label=PQSERVICE state=clean *-volume:1 description: Windows NTFS volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 3.1 serial: 10aa-ad1a size: 98MiB capacity: 100MiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:03 filesystem=ntfs label=SYSTEM RESERVED state=clean *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 version: 3.1 serial: 668c5afc-182e-ff4b-b084-3cc09f54972d size: 395GiB capacity: 395GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:03 filesystem=ntfs label=Don's Machine state=clean *-volume:3 description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 size: 49GiB capacity: 49GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 3945MiB capabilities: nofs *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: / capacity: 46GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered state=mounted *-cdrom description: DVD-RAM writer product: DVD-RW DVRTD11RS vendor: PIONEER physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: 1.01 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 04 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:d1a06000-d1a060ff ioport:3040(size=32) *-power UNCLAIMED description: OEM_Define1 product: OEM_Define5 vendor: OEM_Define2 physical id: 1 version: OEM_Define6 serial: OEM_Define3 capacity: 75mWh *-battery description: Lithium Ion Battery product: CRB Battery 0 vendor: -Virtual Battery 0- physical id: 2 version: 10/12/2007 serial: Battery 0 slot: Fake

  Read the article

• KDE not loading without nomode tag in grub and bad resolution [migrated]

  - by fcole90

  I recently installed Linux Mint 13 KDE but it's not working fine. At first I had to use failsafe mode to boot because normal boot takes to a textual login. If I use normal boot and text login I'm not able to run KDE nor with kdm start neither with startx. kdm says that's already running. Instead X is not able to run because can't connect Xserver to display. If I stop kdm and starx again doesn't change anything. Now I edited the grub to load in nomode. In that way KDE loads but resolution is wrong and xrandr doesn't help, because if I do this: cvt 1366 768 it changes it to 1368: # 1368x768 59.88 Hz (CVT) hsync: 47.79 kHz; pclk: 85.25 MHz Modeline "1368x768_60.00" 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync I also installed bumblebee and nvidia drivers because of optimus technology.. It worked just to have fun with glxspheres but there isn't any gain on KDE.. This is lspci output: fabio@fabio-EasyNote-TS11HR ~ $ lspci |grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev ff My notebook is an EasyNote TS with NVIDIA GeForce GT 540M. Thank you in advance to anyone that may help!

  Read the article

• Stable ubuntu distribution for a broadcom bcm4313 wireless driver and an nvidia 630 graphics adapter

  - by Vivek Pradhan

  I have been trying to completely shift to ubuntu or a linux distro for almost 2 years now. I have tried all the ubuntu distros starting from 10.04 through 11.10, but there has always been some bugs with the display drivers or the wireless cards not being recognised and the additional drivers suggested from the ubuntu community not doing the trick always. I tried a lot to fix bugs, checked a lot of forums, launch pad, got some of them fixed, but could not really get a neat and complete ubuntu machine set up till now. Now I really like the whole open source community and the linux platform, my pc at home runs ubuntu 11.04 perfectly but there have been some glitches always with ubuntu on my laptop that has forced me to stick with windows only. Now I am currently on an hp dv6 laptop that has the broadcom bcm4313 wireless driver and the nvidia 630gtm graphics(optimus) driver. Now I tried to do some research on the support of these drivers in linux machines but could not get anywhere. So I would really appreciate if you guys could suggest some linux distro that I could use that has full support of these drivers or has stable bug fixes for these kind of issues. I tried precise pangolin (LTS) through a live CD but i still see a problem with wifi networks which is a little frustrating. Please help me find the perfect match for my laptop :P I would gladly provide any other information necessary.

  Read the article

• Dell XPS 15 L502x and Ubuntu 11.04 - HDMI output

  - by Jones

  Recently I've bought my dream's notebook, a Dell XPS 15 but since then this dream became a kind of endless nightmare. I'm almost getting crazy to make my graphic card driver work properly, but it seems to be just impossible. Yes, I have a 2GB NVIDIA GeForce GT 540m (Optimus) in it! It simply doesn't work. Every time I generate the xorg.conf Ubuntu hangs on while starting up, which forces me to remove this file to be able to start the notebook with the standard graphic settings. Another problem is that the Dell XPS 15 does NOT have a VGA output, but a HDMI. So, to be able to use a second monitor I have to configure it by the NVIDIA X Server Settings, which just works if the driver is properly initialized with the xorg.conf. I've also tried to make it work with the Bumblebee, but unfortunately it didn't help me much with the HDMI output. Do you guys have any idea to solve this deadlock? Is there any way for me to use my second monitor?

  Read the article

• How to make Unity 3D work with Bumblebee using the Intel chipset

  - by EboMike

  I have a Sony VAIO S laptop with the dreaded Optimus and finally managed to get Bumblebee to work fully on Ubuntu 12.04 so that I can utilize both the hardware acceleration of the Intel chipset as well as the Nvidia one via optirun and/or bumble-app-settings. However, the desktop effects don't work. But they should, I vaguely remember that they worked for a while before I had Bumblebee installed. This is what I get with the support test: :~$ /usr/lib/nux/unity_support_test -p Xlib: extension "NV-GLX" missing on display ":0". OpenGL vendor string: Tungsten Graphics, Inc OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile OpenGL version string: 1.4 (2.1 Mesa 8.0.2) Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: no GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no First of all, I kind of doubt that the chipset doesn't support VBOs (essentially a standard feature in GL). Neither Xorg.0.log nor Xorg.8.log show any particular errors. As for the Nvidia drivers: In order to get them to work, I had to install the 304.22 drivers (older ones wouldn't work). They clobbered libglx.so, so I reinstated the xserver-xorg-core libglx.so in its original place, moved Nvidia's libglx.so to an nvidia-specific folder and specified that folder in the bumblebee.config. That seems to work and shouldn't cause the problem I see here. For fun, I tried to use the Nvidia chipset for Unity, but that didn't fly either: ~$ optirun /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce GT 640M LE/PCIe/SSE2 OpenGL version string: 4.2.0 NVIDIA 304.22 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: no GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no

  Read the article

• nvidia-settings error: nvidia driver not in use

  - by Bastarasov

  I have an Asus with GEFORCE GT520M CUDA (Optimus) and I am running Kubuntu 12.04, 64bit. I am trying to connect an external monitor through DVI and the monitor is not detected. Nvidia settings dont show properly and each time I fire them up there is a warning message: "You do not appear to be using the NVidia X driver. Please, edit...." (you probably know it and heard of this before). I have googled a lot and I have tried some things out but no luck so far. Is there a solution which has worked for someone out there? If so, please be very specific about what I need to do since I am really not good at using the terminal and generally new to ubuntu. I can use the terminal only to copy-paste things. :) Thanks in advance to everyone! ps. Seems like some people dealt with this by fixing the Nvidia settings problem but the instructions have never been clear enough for me to be able to understand.

  Read the article

• Extension GLX missing...on a desktop PC

  - by Bart van Heukelom

  I just installed Ubuntu 12.10 on a new PC with an Nvidia GTX 560 graphics card, but after installing the Nvidia proprietary drivers (either -current or -current-updates), Unity won't start. When trying to start it manually I get the message "extension GLX missing". I've searched around and found results like this question which point out it's a problem with Nvidia Optimus laptops. However, I don't have this problem on a laptop, but on a desktop PC. lshw output for the graphics card: *-display description: VGA compatible controller product: GF114 [GeForce GTX 560 SE] vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nouveau latency=0 resources: irq:16 memory:f4000000-f5ffffff memory:e0000000-e7ffffff memory:e8000000-ebffffff ioport:e000(size=128) memory:f6000000-f607ffff and CPU: *-cpu description: CPU product: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz vendor: Intel Corp. physical id: 40 bus info: cpu@0 version: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz slot: SOCKET 0 size: 1600MHz capacity: 3800MHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms cpufreq configuration: cores=4 enabledcores=4 threads=4

  Read the article

• Error loading libGL.so.1

  - by jdp407

  When attempting to run various pieces of software (notably Steam and Yenka), I have come across an error similar to this: enter code here error while loading shared libraries: libGL.so.1: cannot open shared object file: No such file or directory I'm running a 64 bit system, with an NVidia Optimus card (I dual boot for certain windows only software that requires a dedicated graphics card). I have bumblebee installed, and I am using the nvidia-current driver, rather that one downloaded from NVidia, as recommended. The library (libGL.so.1) is not present in the top directory of /usr/lib, however it is present in /usr/lib32/nvidia-current, as a softlink to /usr/lib32/nvidia-current/libGL.so.304.64. A section of the output from ldconfig -p: libGL.so.1 (libc6,x86-64, OS ABI: Linux 2.4.20) => /usr/lib/x86_64-linux-gnu/mesa/libGL.so.1 libGL.so (libc6,x86-64, OS ABI: Linux 2.4.20) => /usr/lib/x86_64-linux-gnu/libGL.so libGL.so (libc6,x86-64, OS ABI: Linux 2.4.20) => /usr/lib/x86_64-linux-gnu/mesa/libGL.so Obviously a library with that name is being loaded, but they are located in /usr/lib/x86_64-linux-gnu, however installed software doesn't seem to able to 'see' it. For Steam, running it with optirun causes it to work, but this is not the case for Yenka. I assume that optirun causes the library stored in /usr/lib32/nvidia-current to be used, which allows Steam to run, so I can't understant why Yenka won't run. Can anyone explain why software can't see the normal mesa library, and why Yenka refuses to run with the nvidia-current library?

  Read the article

• Problem with installing Nvidia display drivers on Ubuntu 13.10

  - by Pascal

  Hello everyone and thank you for taking a look at this topic! I'm currently trying out Ubuntu 13.10 but I keep hitting a wall when it comes to installing a driver. I've tried: sudo apt-get install nvidia-current This resulted in a un-bootable system. The screen just stayed black and the cursor displayed as an 'X'. After that I did had to re-install Ubuntu. The computer I'm using is an Acer-Aspire-V3 with a build in Nvidia geforce GT 630M and also with a Intel HD graphics chip-set (not sure if chip-set is the right word here). "lspci | grep VGA" output: pascal@pascal-Aspire-V3-571G:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 630M] (rev a1) I've searched a bit here and there and found out that it would be wise to mention that this laptop is using (or so I think) Nvidia Optimus, not sure if it will add anything to the subject but at least I'll mention it just to be sure. Now to the questions: Q1 How is this caused and how can I fix it? Q2 What additional information could I provide to help you help me?

  Read the article

• How do I get HDMI output working on a Dell XPS 15 L502x?

  - by Jones

  Recently I've bought my dream's notebook, a Dell XPS 15 but since then this dream became a kind of endless nightmare. I'm almost getting crazy to make my graphic card driver work properly, but it seems to be just impossible. Yes, I have a 2GB NVIDIA GeForce GT 540m (Optimus) in it! It simply doesn't work. Every time I generate the xorg.conf Ubuntu hangs on while starting up, which forces me to remove this file to be able to start the notebook with the standard graphic settings. Another problem is that the Dell XPS 15 does NOT have a VGA output, but a HDMI. So, to be able to use a second monitor I have to configure it by the NVIDIA X Server Settings, which just works if the driver is properly initialized with the xorg.conf. I've also tried to make it work with the Bumblebee, but unfortunately it didn't help me much with the HDMI output. Do you guys have any idea to solve this deadlock? Is there any way for me to use my second monitor?

  Read the article

• How do I get a Dell Latitude e6420 working?

  - by David_G

  I've just installed Ubuntu 12.04 (64-bit) on a brand new Dell Latitude e6420, and I'm having a few problems. This laptop has an Optimus (?) setup - i.e. integrated gfx and an Nvidia Quadro NVS 4200M. First problem - I ran setup, etc, and discovered that I can only run unity2d - If I try and login with unity3d, it just defaults to 2d. This is with nvidia-current installed (302.07). Note also that I can't run nvidia-settings ("You do not appear to be using the NVIDIA X driver."), and there is no additional drivers found ("No proprietary drivers are in use on this system"). I tried to troubleshoot this, and removed nvidia, leaving (I guess) just Nouveau drivers - In that case, unity3d did work, but I was stuck with the open source Nouveau drivers powering the integrated graphics. So, obviously, I want to run unity3d, and be using the more powerful Nvidia graphics card. I've tried a bit of tinkering around, but I'm not sure the best way to proceed, or perhaps more importantly, I'm not sure of what the best final solution might be. I've heard about bumblebee - but frankly, I would prefer to have the proprietary Nvidia drivers working properly. Any help would be much appreciated!

  Read the article

< Previous Page | 1 2 3 4 5 6  | Next Page >