Search Results

Search found 112559 results on 4503 pages for 'server side javascript'.

Page 2/4503 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Migrate database from SQL Server Standard to SQL Server Express for DotNetNuke

    - by Bjørn
    Hello, we have an old server that we want to dedicate fully as a public webserver (hosting a few DotNetNuke sites), and for this purpose we would like to install SQL Server Express (probably 2008) on the server and thus have both the Database server and the Web Server on the machine. But: The databases for the webserver are hosted on a SQL Server 2005 Standard today. So the question is: Is it possible to move a database from a Standard Server to an Express Server?

    Read the article

  • Windows Server 2003 Terminal Server does not give out all available licenses (solved)

    - by Erwin Blonk
    I installed the Terminal Server role in Windows Server 2003 Standard 64-bits. Still, only 2 connections are allowed. The License Manager says that there are 10 Device CALs available, which is correct, and that none are given out. For good measure I let the server reboot, to no effect. Before this, there was another server (same Windows, except that it is 32 bits) active as a licensing server. I removed the role first and then then added it to the new server. I then removed the Terminal Server Licensing Server component off the old one and added it to the new one. After that, I added to licenses. When that didn't give the required result, I rebooted to new server. Still, the new server, with licenses and all, acts as if it has the 2 license RDP. The server are all stand-alone, there is no active directory been set up. Both servers are in different workgroups. Update (4/12/10): The server has changed the entries in the Terminal Server Licensing a few times. After installing the licenses it added an entry of which the exact phrasing I forgot but it was about temporary Windows 2003 device licenses. Later it added Windows Server 2003 - TS Per Device CAL. The temporary held 2 licenses (standard RDP licenses, I think) and the other 10. At some point, seemingly unrelated from the testing we did, it used a licenses from the new pool. This morning, 2 licenses were used from the pool of 10 and only 1 from the temporary/RDP pool (I wish I had screenshots to show, it changed every few hours oir so it seems). Although I had already activated the server over the internet, and re-activated it, I decided to go through the whole procedure by phone. Update 2 (4/12/10) The problem has been solved. It seems the activation over the web, while it said to have succeeded, did not work correctly. After activating by phone, it did work. What was different from the old setup and what put me on the wrong foot from that moment, was that I now need to create seperate user account because a session with one user account will be taken over by someone else when that account is used by that person. On the previous server, it was possible to open several sesions with the same account. We now use Per Device licenses, I'm not sure what was used before. Thanks all for the replies.

    Read the article

  • SQL Server Agent was not running on Server Dynamics CRM 2013

    - by No1_Melman
    I'm trying to install Dynamics CRM 2013 on a server. This server is on a VM. There are several other VMs, an ADDS & DNS, a MSSQL and a WebServer VM. Each server is a Windows Server 2012 R2. The SQL Server is 2012 Enterprise. Each VM is part of the main Domain, set by the ADDS & DNS. NSLookup confirms I can see the computer at the right IP address. Each separate VM has its own static IP, the DNS is set to the ADDS & DNS. I use the domain administrator to log into all the servers, and make the that domain administrator a local administrator. I've set up all the domain users for the CRM and gave them appropriate permissions, I have also added the accounts to the appropriate places, such that the CRM Deployment user is in the SQL security. The SQL Agent is running. SQL server configuration manager has SQL server network configuration TCP/IP enabled to allow remote connections. The SQL server has the domain user as a administrator, which is the same user being used to install the CRM. In the CRM setup i point to the [Servername]\[Instance] and I have also tried just the [Servername]. to make this easier I called the server MSSQL and left the instance name to the default. I even install the MSSQL instance as the domain administrator. CRM can find the ReportServer url. I have enable all the ports required, including: 135, 1433, 1434, 2382, 2383, 4022. 1434 UDP. I feel like I have absolutely done everything, I have google many times and tried all the different methods, and for the life of me I cant seem to get the CRM setup to find the SQL server agent. It passes everything else perfectly fine. I can even ping the MSSQL server. What is the problem, why does the CRM still keep giving the error: SQLSERVERAGENT (SQLSERVERAGENT) service is not running on the server MSSQL On the MSSQL server, the name of the sql server agent service is: SQL Server Agent (MSSQLSERVER)

    Read the article

  • Linked server problem on SQL Server 2005

    - by BradyKelly
    I have a weird issue and I hope someone can steer me in the right direction for resolving this please. When I execute the following query against a linked server, I get the following error. I can connect to the server in SSMS as a separate server, and execute a similar query against its Deposits table. The nn.nn is my own replacement to avoid broadcasting our server addresses. The query: select td.Batch , td.DateTimeDeposited from Deposits cd left join [172.nn.nn.32\sqlexpress].Terminal.dbo.Deposits td on cd.DateTimeDeposited = td.DateTimeDeposited The error: OLE DB provider "SQLNCLI" for linked server "172.nn.nn.11\sqlexpress" returned message "Login timeout expired". OLE DB provider "SQLNCLI" for linked server "172.nn.nn.11\sqlexpress" returned message "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.". Msg 65535, Level 16, State 1, Line 0 SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF]. Notice how the error is about server 172.nn.nn.11 and not 172.nn.nn.32. SOLVED (STUPID ME): Somebody had added an extra bit to my query that was scrolled off-screen and was querying the 17.nn.nn.11 server.

    Read the article

  • Can't access SQL Server 2008 from workstations, but can from server

    - by Kev
    We have an app that can use mssql2k or 2k8. We've been using 2k but I decided to try 2k8 to compare. I installed in on our win2k3 server alongside mssql2k. In the ODBC applet on the server, I was able to set up access to 2k8, and it passes the test at the end successfully, whether I tell it to use Windows Authentication or an sql login. The latter is how the app always accessed mssql2k. The app works fine from the server, but when I try it on a workstation (winxpsp3), I get a window titled, "Microsoft SQL Server Login" that says: Connection failed: SQLState: '01000' SQL Server Error: 53 [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()). Connection failed: SQLState: '08001' SQL Server ERror: 17 [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied. Then I get the ODBC login dialog, which I can't get to login correctly (I just keep getting the same error above), even copying and pasting a password after resetting it on the server, and whether "trusted" is checked or not. "Options" is disabled. The server was straight SERVERNAME for mssql2k, but for mssql2k8 it's called SERVERNAME\mssql2008. That works on the server, why not on the workstation? (Which I'm logged in as the same person on, BTW.)

    Read the article

  • JavaScript on the server-side like PHP

    - by Nathan Campos
    I'm now thinking to establish my server-side code in JavaScript, and begin to do all on it, but I want to know about its security and flexibility compared to PHP. I want to know too, if it can be successfully used to develop things like forum boards, full web-sites and things like this, as PHP does.

    Read the article

  • JavaScript: this

    - by bdukes
    JavaScript is a language steeped in juxtaposition.  It was made to “look like Java,” yet is dynamic and classless.  From this origin, we get the new operator and the this keyword.  You are probably used to this referring to the current instance of a class, so what could it mean in a language without classes? In JavaScript, this refers to the object off of which a function is referenced when it is invoked (unless it is invoked via call or apply). What this means is that this is not bound to your function, and can change depending on how your function is invoked. It also means that this changes when declaring a function inside another function (i.e. each function has its own this), such as when writing a callback. Let's see some of this in action: var obj = { count: 0, increment: function () { this.count += 1; }, logAfterTimeout = function () { setTimeout(function () { console.log(this.count); }, 1); } }; obj.increment(); console.log(obj.count); // 1 var increment = obj.increment; window.count = 'global count value: '; increment(); console.log(obj.count); // 1 console.log(window.count); // global count value: 1 var newObj = {count:50}; increment.call(newObj); console.log(newObj.count); // 51 obj.logAfterTimeout();// global count value: 1 obj.logAfterTimeout = function () { var proxiedFunction = $.proxy(function () { console.log(this.count); }, this); setTimeout(proxiedFunction, 1); }; obj.logAfterTimeout(); // 1 obj.logAfterTimeout = function () { var that = this; setTimeout(function () { console.log(that.count); }, 1); }; obj.logAfterTimeout(); // 1 The last couple of examples here demonstrate some methods for making sure you get the values you expect.  The first time logAfterTimeout is redefined, we use jQuery.proxy to create a new function which has its this permanently set to the passed in value (in this case, the current this).  The second time logAfterTimeout is redefined, we save the value of this in a variable (named that in this case, also often named self) and use the new variable in place of this. Now, all of this is to clarify what’s going on when you use this.  However, it’s pretty easy to avoid using this altogether in your code (especially in the way I’ve demonstrated above).  Instead of using this.count all over the place, it would have been much easier if I’d made count a variable instead of a property, and then I wouldn’t have to use this to refer to it.  var obj = (function () { var count = 0; return { increment: function () { count += 1; }, logAfterTimeout = function () { setTimeout(function () { console.log(count); }, 1); }, getCount: function () { return count; } }; }()); If you’re writing your code in this way, the main place you’ll run into issues with this is when handling DOM events (where this is the element on which the event occurred).  In that case, just be careful when using a callback within that event handler, that you’re not expecting this to still refer to the element (and use proxy or that/self if you need to refer to it). Finally, as demonstrated in the example, you can use call or apply on a function to set its this value.  This isn’t often needed, but you may also want to know that you can use apply to pass in an array of arguments to a function (e.g. console.log.apply(console, [1, 2, 3, 4])).

    Read the article

  • Change object on client side or on server side

    - by Polina Feterman
    I'm not sure what is the best practice. I have some big and complex objects (NOT flat). In that object I have many related objects - for example Invoice is the main class and one of it's properties is invoiceSupervisor - a big class by it's own called User. User can also be not flat and have department property - also an object called Department. For example I want create new Invoice. First way: I can present to client several fields to fill in. Some of them will be combos that I will need to fill with available values. For example available invoiceSupervisors. Then all the chosen values I can send to server and on server I can create new Invoice and assign all chosen values to that new Invoice. Then I will need to assign new supervisor I will pull the chosen User by id that user picked up on server from combobox. I might do some verification on the User such as does the user applicable to be invoice supervisor. Then I will assign the User object to invoiceSupervisor. Then after filling all properties I will save the new invoice. Second way: In the beginning I can call to server to get a new Invoice. Then on client I can fill all chosen values , for example I can call to server to get new User object and then fill it's id from combobox and assign the User as invoiceSupervisor. After filling the Invoice object on client I can send it to server and then the server will save the new invoice. Before saving server can run some validations as well. So what is the best approach - to make the object on client and send it to server or to collect all values from client and to make a new object on server using those values ?

    Read the article

  • SQL SERVER – Concat Strings in SQL Server using T-SQL – SQL in Sixty Seconds #035 – Video

    - by pinaldave
    Concatenating  string is one of the most common tasks in SQL Server and every developer has to come across it. We have to concat the string when we have to see the display full name of the person by first name and last name. In this video we will see various methods to concatenate the strings. SQL Server 2012 has introduced new function CONCAT which concatenates the strings much efficiently. When we concat values with ‘+’ in SQL Server we have to make sure that values are in string format. However, when we attempt to concat integer we have to convert the integers to a string or else it will throw an error. However, with the newly introduce the function of CONCAT in SQL Server 2012 we do not have to worry about this kind of issue. It concatenates strings and integers without casting or converting them. You can specify various values as a parameter to CONCAT functions and it concatenates them together. Let us see how to concat the values in Sixty Seconds: Here is the script which is used in the video. -- Method 1: Concatenating two strings SELECT 'FirstName' + ' ' + 'LastName' AS FullName -- Method 2: Concatenating two Numbers SELECT CAST(1 AS VARCHAR(10)) + ' ' + CAST(2 AS VARCHAR(10)) -- Method 3: Concatenating values of table columns SELECT FirstName + ' ' + LastName AS FullName FROM AdventureWorks2012.Person.Person -- Method 4: SQL Server 2012 CONCAT function SELECT CONCAT('FirstName' , ' ' , 'LastName') AS FullName -- Method 5: SQL Server 2012 CONCAT function SELECT CONCAT('FirstName' , ' ' , 1) AS FullName Related Tips in SQL in Sixty Seconds: SQL SERVER – Concat Function in SQL Server – SQL Concatenation String Function – CONCAT() – A Quick Introduction 2012 Functions – FORMAT() and CONCAT() – An Interesting Usage A Quick Trick about SQL Server 2012 CONCAT Function – PRINT A Quick Trick about SQL Server 2012 CONCAT function What would you like to see in the next SQL in Sixty Seconds video? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Database, Pinal Dave, PostADay, SQL, SQL Authority, SQL in Sixty Seconds, SQL Query, SQL Scripts, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology, Video Tagged: Excel

    Read the article

  • Javascript self contained sandbox events and client side stack

    - by amnon
    I'm in the process of moving a JSF heavy web application to a REST and mainly JS module application . I've watched "scalable javascript application architecture" by Nicholas Zakas on yui theater (excellent video) and implemented much of the talk with good success but i have some questions : I found the lecture a little confusing in regards to the relationship between modules and sandboxes , on one had to my understanding modules should not be effected by something happening outside of their sandbox and this is why they publish events via the sandbox (and not via the core as they do access the core for hiding base libary) but each module in the application gets a new sandbox ? , shouldn't the sandbox limit events to the modoules using it ? or should events be published cross page ? e.g. : if i have two editable tables but i want to contain each one in a different sandbox and it's events effect only the modules inside that sandbox something like messabe box per table which is a different module/widget how can i do that with sandbox per module , ofcourse i can prefix the events with the moduleid but that creates coupling that i want to avoid ... and i don't want to package modules toghter as one module per combination as i already have 6-7 modules ? while i can hide the base library for small things like id selector etc.. i would still like to use the base library for module dependencies and resource loading and use something like yui loader or dojo.require so in fact i'm hiding the base library but the modules themself are defined and loaded by the base library ... seems a little strange to me libraries don't return simple js objects but usualy wrap them e.g. : u can do something like $$('.classname').each(.. which cleans the code alot , it makes no sense to wrap the base and then in the module create a dependency for the base library by executing .each but not using those features makes a lot of code written which can be left out ... and implemnting that functionality is very bug prone does anyonen have any experience with building a front side stack of this order ? how easy is it to change a base library and/or have modules from different libraries , using yui datatable but doing form validation with dojo ... ? some what of a combination of 2+4 if u choose to do something like i said and load dojo form validation widgets for inputs via yui loader would that mean dojocore is a module and the form module is dependant on it ? Thanks .

    Read the article

  • RDS installation failure on 2012 R2 Server Core VM in Hyper-V Server

    - by Giles
    I'm currently installing a test-bed for my firms Infrastructure replacement. 10 or so Windows/Linux servers will be replaced by 2 physical servers running Hyper-V server. All services (DC, RDS, SQL) will be on Windows 2012 R2 Server Core VMs, Exchange on Server 2012 R2 GUI, and the rest are things like Elastix, MailArchiver etc, which aren't part of the equation thus far. I have installed Hyper-V server on a test box, and sucessfully got two virtual DC's running, SQL 2014 running, and 8.1 which I use for the RSAT tools. When trying to install RDS (The old fashioned kind, not the newer VDI(?) style), I get a failed installation due to the server not being able to reboot. A couple of articles have said not to do it locally, so I've moved on. Sitting at the Powershell prompt on the Domain Controller or SQL server (Both Server Core), I run the following commands: Import-Module RemoteDesktop New-SessionDeployment -ConnectionBroker "AlstersTS.Alsters.local" -SessionHost "AlstersTS.Alsters.local" The installation begins, carries on for 2 or 3 minutes, then I receive the following error message: New-SessionDeployment : Validation failed for the "RD Connection Broker" parameter. AlstersTS.Alsters.local Unable to connect to the server by using WindowsPowerShell remoting. Verify that you can connect to the server. At line:1 char:1 + NewSessionDeployment -ConnectionBroker "AlstersTS.Alsters.local" -SessionHost " ... + + CategoryInfo : NotSpecified: (:) [Write-Error], WriteErrorException + FullyQualifiedErrorID : Microsoft.PowerShell.Commands.WriteErrorException,New-SessionDeployment So far, I have: Triple, triple checked syntax. Tried various other commands, and a script to accomplish the same task. Checked DNS is functioning as it should. Checked to the best of my knowledge that AD is working as it should. Checked that the Network Service has the needed permissions. Created another VM and placed the two roles on different servers. Deleted all VMs, started again with a new domain name (Lather, rinse, repeat) Performed the whole installation on a second physical box running Hyper-V Server Pleaded with it Interestingly, if I perform the installation via a GUI installation, the thing just works! Now I know I could convert this to a Server Core role after installation, but this wouldn't teach me what was wrong in the first instance. I've probably got 10 pages through various Google searches, each page getting a little less relevant. The closest matches seem to have good information, but it doesn't seem to be the fix for my set-up. As a side note, I expected to be able to "tee" or "out-file" the error message into a text file, but couldn't get that to work either, so I've typed in the error message manually. Chaps, any suggestions, from the glaringly obvious, to the long-winded and complex? Thanks!

    Read the article

  • Uninstalling Reporting Server 2008 on Windows Server 2008

    - by Piotr Rodak
    Ha. I had quite disputable pleasure of installing and reinstalling and reinstalling and reinstalling – I think about 5 times before it worked – Reporting Server 2008 on Windows Server with the same year number in name. During my struggle I came across an error which seems to be not quite unfamiliar to some more unfortunate developers and admins who happen to uninstall SSRS 2008 from the server. I had the SSRS 2008 installed as named instance, SQL2008. I wanted to uninstall the server and install it to default instance. And this is when it bit me – not the first time and not the last that day . The setup complained that it couldn’t access a DLL: Error message: TITLE: Microsoft SQL Server 2008 Setup ------------------------------ The following error has occurred: Access to the path 'C:\Windows\SysWOW64\perf-ReportServer$SQL2008-rsctr.dll' is denied. For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1600.22&EvtType=0x60797DC7%25400x84E8D3C0 ------------------------------ BUTTONS: OK This is a screenshot that shows the above error: This issue seems to have a bit of literature dedicated to it and even seemingly a KB article http://support.microsoft.com/kb/956173 and a similar Connect item: http://connect.microsoft.com/SQLServer/feedback/details/363653/error-messages-when-upgrading-from-sql-2008-rc0-to-rtm The article describes issue as following: When you try to uninstall Microsoft SQL Server 2008 Reporting Services from the server, you may receive the following error message: An error has occurred: Access to the path 'Drive_Letter:\WINDOWS\system32\perf-ReportServer-rsctr.dll' is denied. Note Drive_Letter refers to the disc drive into which the SQL Server installation media is inserted. In my case, the Note was not true; the error pointed to a dll that was located in Windows folder on C:\, not where the installation media were. Despite this difference I tried to identify any processes that might be keeping lock on the dll. I downloaded Sysinternals process explorer and ran it to find any processes I could stop. Unfortunately, there was no such process. I tried to rerun the installation, but it failed at the same step. Eventually I decided to remove the dll before the setup was executed. I changed name of the dll to be able to restore it in case of some issues. Interestingly, Windows let me do it, which means that indeed, it was not locked by any process. I ran the setup and this time it uninstalled the instance without any problems:   To summarize my experience I should say – be very careful, don’t leave any leftovers after uninstallation – remove/rename any folders that are left after setup has finished. For some reason, setup doesn’t remove folders and certain files. Installation on Windows Server 2008 requires more attention than on Windows 2003 because of the changed security model, some actions can be executed only by administrator in elevated execution mode. In general, you have to get used to UAC and a bit different experience than with Windows Server 2003. Technorati Tags: SQL Server 2008,Windows Server 2008,SRS,Reporting Services

    Read the article

  • SQL SERVER – History of SQL Server Database Encryption

    - by pinaldave
    I recently met Michael Coles and Rodeney Landrum the author of one of the kind book Expert SQL Server 2008 Encryption at SQLPASS in Seattle. During the conversation we ended up how Microsoft is evolving encryption technology. The same discussion lead to talking about history of encryption tools in SQL Server. Michale pointed me to page 18 of his book of encryption. He explicitly give me permission to re-produce relevant part of history from his book. Encryption in SQL Server 2000 Built-in cryptographic encryption functionality was nonexistent in SQL Server 2000 and prior versions. In order to get server-side encryption in SQL Server you had to resort to purchasing or creating your own SQL Server XPs. Creating your own cryptographic XPs could be a daunting task owing to the fact that XPs had to be compiled as native DLLs (using a language like C or C++) and the XP application programming interface (API) was poorly documented. In addition there were always concerns around creating wellbehaved XPs that “played nicely” with the SQL Server process. Encryption in SQL Server 2005 Prior to the release of SQL Server 2005 there was a flurry of regulatory activity in response to accounting scandals and attacks on repositories of confidential consumer data. Much of this regulation centered onthe need for protecting and controlling access to sensitive financial and consumer information. With the release of SQL Server 2005 Microsoft responded to the increasing demand for built-in encryption byproviding the necessary tools to encrypt data at the column level. This functionality prominently featured the following: Support for column-level encryption of data using symmetric keys or passphrases. Built-in access to a variety of symmetric and asymmetric encryption algorithms, including AES, DES, Triple DES, RC2, RC4, and RSA. Capability to create and manage symmetric keys. Key creation and management. Ability to generate asymmetric keys and self-signed certificates, or to install external asymmetric keys and certificates. Implementation of hierarchical model for encryption key management, similar to the ANSI X9.17 standard model. SQL functions to generate one-way hash codes and digital signatures, including SHA-1 and MD5 hashes. Additional SQL functions to encrypt and decrypt data. Extensions to the SQL language to support creation, use, and administration of encryption keys and certificates. SQL CLR extensions that provide access to .NET-based encryption functionality. Encryption in SQL Server 2008 Encryption demands have increased over the past few years. For instance, there has been a demand for the ability to store encryption keys “off-the-box,” physically separate from the database and the data it contains. Also there is a recognized requirement for legacy databases and applications to take advantage of encryption without changing the existing code base. To address these needs SQL Server 2008 adds the following features to its encryption arsenal: Transparent Data Encryption (TDE): Allows you to encrypt an entire database, including log files and the tempdb database, in such a way that it is transparent to client applications. Extensible Key Management (EKM): Allows you to store and manage your encryption keys on an external device known as a hardware security module (HSM). Cryptographic random number generation functionality. Additional cryptography-related catalog views and dynamic management views. SQL language extensions to support the new encryption functionality. The encryption book covers all the tools in its various chapter in one simple story. If you are interested how encryption evolved and reached to the stage where it is today, this book is must for everyone. You can read my earlier review of the book over here. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Book Review, SQLAuthority News, T SQL, Technology Tagged: Encryption, SQL Server Encryption, SQLPASS

    Read the article

  • Find the item index in jCarouselLite

    - by stanley
    Hi all, I use jCarouselLite for scrolling text, I use and as the content for scrolling, I need to trigger a javascript event when it reaches at the end of the content(). I need to change the scroll content when it finishes scrolling previous content. I tried adding a call back function but it does'nt work. This is my code: $("#scrollDiv").jCarouselLite({ vertical: true, visible:3, hoverPause:true, scroll:3, auto:1, itemLastInCallback:changeItem, speed:5000 }); Certification Alerts-CertifyAssign cert_test_11 - cert_test_22_sub - sub_test_22 cert_adhoc - cert_adhoc_11 - stype1 Certification Alerts-CertifyReminder sales process001 - sub sales cert 2 - sales cert

    Read the article

  • Microsoft TypeScript : A Typed Superset of JavaScript

    - by shiju
    JavaScript is gradually becoming a ubiquitous programming language for the web, and the popularity of JavaScript is increasing day by day. Earlier, JavaScript was just a language for browser. But now, we can write JavaScript apps for browser, server and mobile. With the advent of Node.js, you can build scalable, high performance apps on the server with JavaScript. But many developers, especially developers who are working with static type languages, are hating the JavaScript language due to the lack of structuring and the maintainability problems of JavaScript. Microsoft TypeScript is trying to solve some problems of JavaScript when we are building scalable JavaScript apps. Microsoft TypeScript TypeScript is Microsoft's solution for writing scalable JavaScript programs with the help of Static Types, Interfaces, Modules and Classes along with greater tooling support. TypeScript is a typed superset of JavaScript that compiles to plain JavaScript. This would be more productive for developers who are coming from static type languages. You can write scalable JavaScript  apps in TypeScript with more productive and more maintainable manner, and later you can compiles to plain JavaScript which will be run on any browser and any OS. TypeScript will work with browser based JavaScript apps and JavaScript apps that following CommonJS specification. You can use TypeScript for building HTML 5 apps, Node.JS apps, WinRT apps. TypeScript is providing better tooling support with Visual Studio, Sublime Text, Vi, Emacs. Microsoft has open sourced its TypeScript languages on CodePlex at http://typescript.codeplex.com/    Install TypeScript You can install TypeScript compiler as a Node.js package via the NPM or you can install as a Visual Studio 2012 plug-in which will enable you better tooling support within the Visual Studio IDE. Since TypeScript is distributed as a Node.JS package, and it can be installed on other OS such as Linux and MacOS. The following command will install TypeScript compiler via an npm package for node.js npm install –g typescript TypeScript provides a Visual Studio 2012 plug-in as MSI file which will install TypeScript and also provides great tooling support within the Visual Studio, that lets the developers to write TypeScript apps with greater productivity and better maintainability. You can download the Visual Studio plug-in from here Building JavaScript  apps with TypeScript You can write typed version of JavaScript programs with TypeScript and then compiles it to plain JavaScript code. The beauty of the TypeScript is that it is already JavaScript and normal JavaScript programs are valid TypeScript programs, which means that you can write normal  JavaScript code and can use typed version of JavaScript whenever you want. TypeScript files are using extension .ts and this will be compiled using a compiler named tsc. The following is a sample program written in  TypeScript greeter.ts 1: class Greeter { 2: greeting: string; 3: constructor (message: string) { 4: this.greeting = message; 5: } 6: greet() { 7: return "Hello, " + this.greeting; 8: } 9: } 10:   11: var greeter = new Greeter("world"); 12:   13: var button = document.createElement('button') 14: button.innerText = "Say Hello" 15: button.onclick = function() { 16: alert(greeter.greet()) 17: } 18:   19: document.body.appendChild(button) .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The above program is compiling with the TypeScript compiler as shown in the below picture The TypeScript compiler will generate a JavaScript file after compiling the TypeScript program. If your TypeScript programs having any reference to other TypeScript files, it will automatically generate JavaScript files for the each referenced files. The following code block shows the compiled version of plain JavaScript  for the above greeter.ts greeter.js 1: var Greeter = (function () { 2: function Greeter(message) { 3: this.greeting = message; 4: } 5: Greeter.prototype.greet = function () { 6: return "Hello, " + this.greeting; 7: }; 8: return Greeter; 9: })(); 10: var greeter = new Greeter("world"); 11: var button = document.createElement('button'); 12: button.innerText = "Say Hello"; 13: button.onclick = function () { 14: alert(greeter.greet()); 15: }; 16: document.body.appendChild(button); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Tooling Support with Visual Studio TypeScript is providing a plug-in for Visual Studio which will provide an excellent support for writing TypeScript  programs within the Visual Studio. The following screen shot shows the Visual Studio template for TypeScript apps   The following are the few screen shots of Visual Studio IDE for TypeScript apps. Summary TypeScript is Microsoft's solution for writing scalable JavaScript apps which will solve lot of problems involved in larger JavaScript apps. I hope that this solution will attract lot of developers who are really looking for writing maintainable structured code in JavaScript, without losing any productivity. TypeScript lets developers to write JavaScript apps with the help of Static Types, Interfaces, Modules and Classes and also providing better productivity. I am a passionate developer on Node.JS and would definitely try to use TypeScript for building Node.JS apps on the Windows Azure cloud. I am really excited about to writing Node.JS apps by using TypeScript, from my favorite development IDE Visual Studio. You can follow me on twitter at @shijucv

    Read the article

  • What useful things could a javaScript library provide?

    - by Delan Azabani
    In many of my answers I repeatedly urge users not to use JavaScript libraries like jQuery. I even wrote a blog post about the problems that using a library create. Some of these problems include holding back native standards development, keeping users comfortably using IE, and abstracting the developer from real JavaScript. If a site doesn't require IE as part of its audience, then how are libraries useful? The other popular browsers share extremely similar implementations and work well with things like JavaScript 1.6 arrays and AJAX. This is not a troll question, I'm truly wondering what they're useful for.

    Read the article

  • send different object value to different funtions

    - by user295189
    I have the code below. I want to send the value of value1 n.value1s = new Array(); n.value1sIDs = new Array(); n.value1sNames = new Array(); n.value1sColors = new Array(); n.descriptions = new Array(); to pg.loadLinkedvalue1s(n); and for value2 to pg.loadLinkedvalue2s(n); Howd I do that in javascript without haveing to rewrite the complete function please see the code below if(n.id == "row"){ n.rs = n.parentElement; if(n.rs.multiSelect == 0){ n.selected = 1; this.selectedRows = [ n ]; if(this.lastClicked && this.lastClicked != n){ selectionChanged = 1; this.lastClicked.selected = 0; this.lastClicked.style.color = "000099"; this.lastClicked.style.backgroundColor = ""; } } else { n.selected = n.selected ? 0 : 1; this.getSelectedRows(); } this.lastClicked = n; n.value1s = new Array(); n.value1sIDs = new Array(); n.value1sNames = new Array(); n.value1sColors = new Array(); n.descriptions = new Array(); n.value2s = new Array(); n.value2IDs = new Array(); n.value2Names = new Array(); n.value2Colors = new Array(); n.value2SortOrders = new Array(); n.value2Descriptions = new Array(); var value1s = myOfficeFunction.DOMArray(n.all.value1s.all.value1); var value2s = myOfficeFunction.DOMArray(n.all.value1s.all.value2); for(var i=0,j=0,k=1;i<vaue1s.length;i++){ n.sortOrders[j] = k++; n.vaue1s[j] = vaue1s[i].v; n.vaue1IDs[j] = vaue1s[i].i; n.vaue1Colors[j] = vaue1s[i].c; alert(n.vaue1Colors[j]); var vals = vaue1s[i].innerText.split(String.fromCharCode(127)); n.cptSortOrders[j] = k++; n.value2s[j] = value2s[i].v; n.value2IDs[j] = value2s[i].i; n.value2Colors[j] = value2s[i].c; var value2Vals = value2s[i].innerText.split(String.fromCharCode(127)); if(vals.length == 2){ alert(n.vaue1Colors[j]); n.vaue1Names[j] = vals[0]; n.descriptions[j++] = vals[1]; } if(value2Vals.length == 2){ n.value2Names[j] = cptVals[0]; alert(n.value2Names[j]); n.cptDescriptions[j++] = cptVals[1]; alert(n.cptDescriptions[j++]); } } //want to run this with value1 only pg.loadLinkedvalue1s(n); // want to run this with value2 only pg.loadLinkedvalue2s(n); }

    Read the article

  • SQL Server Configuration timeouts - and a workaround [SSIS]

    - by jamiet
    Ever since I started writing SSIS packages back in 2004 I have opted to store configurations in .dtsConfig (.i.e. XML) files rather than in a SQL Server table (aka SQL Server Configurations) however recently I inherited some packages that used SQL Server Configurations and thus had to immerse myself in their murky little world. To all the people that have ever gone onto the SSIS forum and asked questions about ambiguous behaviour of SQL Server Configurations I now say this... I feel your pain! The biggest problem I have had was in dealing with the change to the order in which configurations get applied that came about in SSIS 2008. Those changes are detailed on MSDN at SSIS Package Configurations however the pertinent bits are: As the utility loads and runs the package, events occur in the following order: The dtexec utility loads the package. The utility applies the configurations that were specified in the package at design time and in the order that is specified in the package. (The one exception to this is the Parent Package Variables configurations. The utility applies these configurations only once and later in the process.) The utility then applies any options that you specified on the command line. The utility then reloads the configurations that were specified in the package at design time and in the order specified in the package. (Again, the exception to this rule is the Parent Package Variables configurations). The utility uses any command-line options that were specified to reload the configurations. Therefore, different values might be reloaded from a different location. The utility applies the Parent Package Variable configurations. The utility runs the package. To understand how these steps differ from SSIS 2005 I recommend reading Doug Laudenschlager’s blog post Understand how SSIS package configurations are applied. The very nature of SQL Server Configurations means that the Connection String for the database holding the configuration values needs to be supplied from the command-line. Typically then the call to execute your package resembles this: dtexec /FILE Package.dtsx /SET "\Package.Connections[SSISConfigurations].Properties[ConnectionString]";"\"Data Source=SomeServer;Initial Catalog=SomeDB;Integrated Security=SSPI;\"", The problem then is that, as per the steps above, the package will (1) attempt to apply all configurations using the Connection String stored in the package for the "SSISConfigurations" Connection Manager before then (2) applying the Connection String from the command-line and then (3) apply the same configurations all over again. In the packages that I inherited that first attempt to apply the configurations would timeout (not unexpected); I had 8 SQL Server Configurations in the package and thus the package was waiting for 2 minutes until all the Configurations timed out (i.e. 15seconds per Configuration) - in a package that only executes for ~8seconds when it gets to do its actual work a delay of 2minutes was simply unacceptable. We had three options in how to deal with this: Get rid of the use of SQL Server configurations and use .dtsConfig files instead Edit the packages when they get deployed Change the timeout on the "SSISConfigurations" Connection Manager #1 was my preferred choice but, for reasons I explain below*, wasn't an option in this particular instance. #2 was discounted out of hand because it negates the point of using Configurations in the first place. This left us with #3 - change the timeout on the Connection Manager. This is done by going into the properties of the Connection Manager, opening the "All" tab and changing the Connect Timeout property to some suitable value (in the screenshot below I chose 2 seconds). This change meant that the attempts to apply the SQL Server configurations timed out in 16 seconds rather than two minutes; clearly this isn't an optimum solution but its certainly better than it was. So there you have it - if you are having problems with SQL Server configuration timeouts within SSIS try changing the timeout of the Connection Manager. Better still - don't bother using SQL Server Configuration in the first place. Even better - install RC0 of SQL Server 2012 to start leveraging SSIS parameters and leave the nasty old world of configurations behind you. @Jamiet * Basically, we are leveraging a SSIS execution/logging framework in which the client had invested a lot of resources and SQL Server Configurations are an integral part of that.

    Read the article

  • Connectivity with SQL Server Express 2008 r2 and SQL Server 2000 on same machine

    - by Jim R
    At first glance this may same a duplicate of Installing both SQL Server 2000 and SQL Server 2008 on the same machine, but it is not. I have SQL Server 2000 and SQL Server 2008 R2 installed on the same machine and working fine. My problem lies with connecting to the 2008 R2 server from a remote machine. My connectivity needs to be TCP. The legacy installation or SQL 2000 uses the default port of 1433. The named instance is by default configured to use 'Shared Memory' and is working fine. When I configured the 2008 R2 server to use 1433 (I did not think that thru) the service refused to start becasue 1433 was already in use by the legacy SQL 2000 default instance. Doh! What I want to do is have both servers available simultaneously via TCP. both servers need not be on the same port, put if I cannot run them on the same port, then how do I configure the clients? Is there not some kind of proxy available that can monitor the 1433 port and pass the request thru to the correct SQL instance by name? Is this capability built into SQL server already? Thanks, Jim

    Read the article

  • SQL SERVERServer Side Paging in SQL Server 2011 Performance Comparison

    - by pinaldave
    Earlier, I have written about SQL SERVERServer Side Paging in SQL Server 2011 – A Better Alternative. I got many emails asking for performance analysis of paging. Here is the quick analysis of it. The real challenge of paging is all the unnecessary IO reads from the database. Network traffic was one of the reasons why paging has become a very expensive operation. I have seen many legacy applications where a complete resultset is brought back to the application and paging has been done. As what you have read earlier, SQL Server 2011 offers a better alternative to an age-old solution. This article has been divided into two parts: Test 1: Performance Comparison of the Two Different Pages on SQL Server 2011 Method In this test, we will analyze the performance of the two different pages where one is at the beginning of the table and the other one is at its end. Test 2: Performance Comparison of the Two Different Pages Using CTE (Earlier Solution from SQL Server 2005/2008) and the New Method of SQL Server 2011 We will explore this in the next article. This article will tackle test 1 first. Test 1: Retrieving Page from two different locations of the table. Run the following T-SQL Script and compare the performance. SET STATISTICS IO ON; USE AdventureWorks2008R2 GO DECLARE @RowsPerPage INT = 10, @PageNumber INT = 5 SELECT * FROM Sales.SalesOrderDetail ORDER BY SalesOrderDetailID OFFSET @PageNumber*@RowsPerPage ROWS FETCH NEXT 10 ROWS ONLY GO USE AdventureWorks2008R2 GO DECLARE @RowsPerPage INT = 10, @PageNumber INT = 12100 SELECT * FROM Sales.SalesOrderDetail ORDER BY SalesOrderDetailID OFFSET @PageNumber*@RowsPerPage ROWS FETCH NEXT 10 ROWS ONLY GO You will notice that when we are reading the page from the beginning of the table, the database pages read are much lower than when the page is read from the end of the table. This is very interesting as when the the OFFSET changes, PAGE IO is increased or decreased. In the normal case of the search engine, people usually read it from the first few pages, which means that IO will be increased as we go further in the higher parts of navigation. I am really impressed because using the new method of SQL Server 2011,  PAGE IO will be much lower when the first few pages are searched in the navigation. Test 2: Retrieving Page from two different locations of the table and comparing to earlier versions. In this test, we will compare the queries of the Test 1 with the earlier solution via Common Table Expression (CTE) which we utilized in SQL Server 2005 and SQL Server 2008. Test 2 A : Page early in the table -- Test with pages early in table USE AdventureWorks2008R2 GO DECLARE @RowsPerPage INT = 10, @PageNumber INT = 5 ;WITH CTE_SalesOrderDetail AS ( SELECT *, ROW_NUMBER() OVER( ORDER BY SalesOrderDetailID) AS RowNumber FROM Sales.SalesOrderDetail PC) SELECT * FROM CTE_SalesOrderDetail WHERE RowNumber >= @PageNumber*@RowsPerPage+1 AND RowNumber <= (@PageNumber+1)*@RowsPerPage ORDER BY SalesOrderDetailID GO SET STATISTICS IO ON; USE AdventureWorks2008R2 GO DECLARE @RowsPerPage INT = 10, @PageNumber INT = 5 SELECT * FROM Sales.SalesOrderDetail ORDER BY SalesOrderDetailID OFFSET @PageNumber*@RowsPerPage ROWS FETCH NEXT 10 ROWS ONLY GO Test 2 B : Page later in the table -- Test with pages later in table USE AdventureWorks2008R2 GO DECLARE @RowsPerPage INT = 10, @PageNumber INT = 12100 ;WITH CTE_SalesOrderDetail AS ( SELECT *, ROW_NUMBER() OVER( ORDER BY SalesOrderDetailID) AS RowNumber FROM Sales.SalesOrderDetail PC) SELECT * FROM CTE_SalesOrderDetail WHERE RowNumber >= @PageNumber*@RowsPerPage+1 AND RowNumber <= (@PageNumber+1)*@RowsPerPage ORDER BY SalesOrderDetailID GO SET STATISTICS IO ON; USE AdventureWorks2008R2 GO DECLARE @RowsPerPage INT = 10, @PageNumber INT = 12100 SELECT * FROM Sales.SalesOrderDetail ORDER BY SalesOrderDetailID OFFSET @PageNumber*@RowsPerPage ROWS FETCH NEXT 10 ROWS ONLY GO From the resultset, it is very clear that in the earlier case, the pages read in the solution are always much higher than the new technique introduced in SQL Server 2011 even if we don’t retrieve all the data to the screen. If you carefully look at both the comparisons, the PAGE IO is much lesser in the case of the new technique introduced in SQL Server 2011 when we read the page from the beginning of the table and when we read it from the end. I consider this as a big improvement as paging is one of the most used features for the most part of the application. The solution introduced in SQL Server 2011 is very elegant because it also improves the performance of the query and, at large, the database. Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: SQL, SQL Authority, SQL Optimization, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • More information on the Patch Tuesday updates for SQL Server

    - by AaronBertrand
    Last week, Microsoft released a series of patches for all supported versions of SQL Server (from SQL Server 2005 SP3 all the way to SQL Server 2008 R2). The reason for the patch against SQL Server installations is largely a client-side issue with the XML viewer application, and for SQL Server specifically, the exploit is limited to potential information disclosure. A very easy way to avoid exposure to this exploit is simply to never open a file with the .disco extension (these files are likely already...(read more)

    Read the article

  • Client side latency when using prediction

    - by Tips48
    I've implemented Client-Side prediction into my game, where when input is received by the client, it first sends it to the server and then acts upon it just as the server will, to reduce the appearance of lag. The problem is, the server is authoritative, so when the server sends back the position of the Entity to the client, it undo's the effect of the interpolation and creates a rubber-banding effect. For example: Client sends input to server - Client reacts on input - Server receives and reacts on input - Server sends back response - Client reaction is undone due to latency between server and client To solve this, I've decided to store the game state and input every tick in the client, and then when I receive a packet from the server, get the game state from when the packet was sent and simulate the game up to the current point. My questions: Won't this cause lag? If I'm receiving 20/30 EntityPositionPackets a second, that means I have to run 20-30 simulations of the game state. How do I sync the client and server tick? Currently, I'm sending the milli-second the packet was sent by the server, but I think it's adding too much complexity instead of just sending the tick. The problem with converting it to sending the tick is that I have no guarantee that the client and server are ticking at the same rate, for example if the client is an old-end PC.

    Read the article

  • What are my choices for server side sandboxed scripting?

    - by alfa64
    I'm building a public website where users share data and scripts to run over some data. The scripts are run serverside in some sort of sandbox without other interaction this cycle: my Perl program reads from a database a User made script, adds the data to be processed into the script ( ie: a JSON document) then calls the interpreter, it returns the response( a JSON document or plain text), i save it to the database with my perl script. The script should be able to have some access to built in functions added to the scripting language by myself, but nothing more. So i've stumbled upon node.js as a javascript interpreter, and and hour or so ago with Google's V8(does v8 makes sense for this kind of thing?). CoffeeScript also came to my mind, since it looks nice and it's still Javascript. I think javascript is widespread enough and more "sandboxeable" since it doesn't have OS calls or anything remotely insecure ( i think ). by the way, i'm writing the system on Perl and Php for the front end. To improve the question: I'm choosing Javascript because i think is secure and simple enough to implement with node.js, but what other alternatives are for achieving this kind of task? Lua? Python? I just can't find information on how to run a sandboxed interpreter in a proper way.

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >