Search Results

Search found 101 results on 5 pages for 'sli'.

Page 2/5 | < Previous Page | 1 2 3 4 5  | Next Page >

  • Graphics Card Compatability

    - by Aaron
    I am a first time builder and while I have the basic understanding of how to put a computer together, one final thing eludes me. What are the requirements for instaling 2 or more graphics cards on a computer? Example: EVGA 015-P3-1589-AR GeForce GTX 580 (Fermi) FTW Hydro Copper 2 1536MB 384-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card ECS NGTX580-1536PI-F GeForce GTX 580 (Fermi) 1536MB 384-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card I am not planning on buying either of these cards in the near future. I simply am using them as an example because of the number of differences. As I understand it these two cards will work together (given the proper motherboard) because the only thing that matters is that they are both GeForce GTX 580. Is my assumption correct? If not, why?

    Read the article

  • How to disable discrete GPU using NVIDIA drivers?

    - by penzoiders
    I have a DELL studio XPS 13 (aka 1340) as of 12.04 most things run smoothly out of the box, but I have some power draining and warmness issues (if not to be called terrible heat issues) The system came with a NVIDIA GeForce 9500M (which has Hybrid SLI) and it shows up in "lspci" as these 2 cards 02:00.0 VGA compatible controller: NVIDIA Corporation G98 [GeForce 9200M GS] (rev a1) 03:00.0 VGA compatible controller: NVIDIA Corporation C79 [GeForce 9400M G] (rev b1) I had to install nvidia-current over noveau driver 'cause noveau does freeze the system after suspension. By installing nvidia-current and running nvidia-xconfig the resume process after suspension is fixed. By the way both with nvidia-current and noveau the system drains a lot of battery and heats up a lot. I suppose this is because the discrete GPU is always on. I don't really need 3D graphics on this system, if not the minimal to run unity and compiz for window management. So my question is: How do I disable, using nvidia-current, the discrete GPU 9200M and use only the integrated one 9400M? notes: In BIOS I have no option to disable discrete GPU This I think is not applicable because of the suspension-freeze issue (with noveau): https://help.ubuntu.com/community/HybridGraphics I've found this but I don't know which --sli option I should choose to fit my needs: http://manpages.ubuntu.com/manpages/hardy/man1/nvidia-xconfig.1.html My system has not optimus or cuda, but anyone can tell me if bumblebee can work for me?

    Read the article

  • Ubuntu 13.10. After login, no desktop displayed. Two Nvidia Graphics Cards, Four Monitors

    - by jmerkow
    I am working on an issue with my Ubuntu 13.10 installation. I am attempting to get 4 monitors up and running but I am having some trouble. So far, I installed and updated to the latest NVIDIA drivers (331.20). Initially X would not start (after installation) so I replaced my xorg.conf with xorg.conf.failsafe. This fixed that problem, but then I tried to enable the other 2 monitors (other video card) and xorg fails to start once again (after I login there is no desktop). I am fairly new to linux but I am not a complete beginner, but I'm not comfortable poking around too much on my own to troubleshoot yet.... lspci -nn | grep VGA: 03:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF110 [GeForce GTX 570 Rev. 2] [10de:1086] (rev a1) 05:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF110 [GeForce GTX 580] [10de:1080] (rev a1) It seems that the nvidia-settings tool does not result in a good xorg.conf file. Here it is: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 331.20 (buildmeister@swio-display-x86-rhel47-05) Wed Oct 30 18:20:32 PDT 2013 Section "ServerLayout" Identifier "Default Layout" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection ... Section "Monitor" Identifier "Configured Monitor" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "SHARP HDMI" HorizSync 15.0 - 68.0 VertRefresh 55.0 - 76.0 EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "Samsung SyncMaster" HorizSync 0.0 - 0.0 VertRefresh 0.0 EndSection Section "Device" Identifier "Configured Video Device" Driver "vesa" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 570" BusID "PCI:3:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 580" BusID "PCI:5:0:0" EndSection Section "Screen" Identifier "Default Screen" Device "Configured Video Device" Monitor "Configured Monitor" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-1" Option "metamodes" "HDMI-0: nvidia-auto-select +640+0, DVI-I-3: nvidia-auto-select +0+1080" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection

    Read the article

  • How to diagnose computer lockup/freezing problem

    - by Scott Mitchell
    I built a desktop computer a couple years back with the following specs: CPU: Intel Core 2 Quad Q9300 Yorkfield 2.5GHz 6MB L2 Cache LGA 775 95W Quad-Core Processor BX80580Q9300 Motherboard: EVGA 122-CK-NF68-T1 LGA 775 NVIDIA nForce 680i SLI ATX Intel Motherboard Video Card: Two EVGA 256-P2-N758-TR GeForce 8600GT SCC 256MB 128-bit GDDR3 PCI Express x16 SLI Supported Video Card PSU: SeaSonic S12 Energy Plus SS-550HT 550W ATX12V V2.3 / EPS12V V2.91 SLI Certified CrossFire Ready 80 PLUS Certified Active PFC Power Supply Memory: Two G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL5D-4GBPQ Since its inception, the machine has periodically locked up, the regularlity having varied over the years from once a day to once a month. Typically, lockups happen once every few days. By "lockup" I mean my computer just freezes. The screen locks up, I can't move the mouse. Hitting keys on my keyboard that normally turn LEDs on or off on the keyboard (such as Caps Lock) no longer turn the LEDs on or off. If there was music playing at the time of the lockup, noise keeps coming out of the speakers, but it's just the current frequency/note that plays indefinitely. There is no BSOD. When such a lockup occurs I have to do a hard reboot by either turning off the computer or hitting the reset button. I have the most recent version of the NVIDIA hardware drivers, and update them semi-regularly, but that hasn't seemed to help. I am currently using Windows 7 x64, but was previously using Windows Server 2003 x64 and having the same lockup issues. My guess is that it's somehow video driver or motherboard related, but I don't know how to go about diagnosing this problem to narrow down which of the two is the culprit. Additional information re: cooling Regarding cooling... I've not installed any after-market cooling systems aside from two regular fans I scavenged from an older computer. The fan atop the CPU is the one that shipped with it. One of the two scavenged fans I added it located at the bottom tower of the corner, in an attempt to create some airflow from front to back. The second fan is pointed directly at the two video cards. SpeedFan installation and readings Per studiohack's suggestion, I installed SpeedFan, which provided the following temperature readings: GPU: 63C GPU: 65C System: 76C CPU: 64C AUX: 36C Core 0: 78C Core 1: 76C Core 2: 79C Core 3: 79C Update #3: Another Lockup :-( Well, I had another lockup last night. :-( SpeedFan reported the CPU temp at 38 C when it happened, and there was no spike in temperature leading up to the freeze. One thing I notice is that the freeze seems more likely to happen if I am watching a video. In fact, of the last 5 freezes over the past month, 4 of them have been while watching a video on Flickr. Not necessarily the same video, but a video nevertheless. I don't know if this is just coincidence or if it means anything. (As an aside, each night before bedtime my 2 year old daughter sits on my lap and watches some home videos on Flickr and, in the last month, has learned the phrase, "Uh oh, computer broke.") Update #4: MemTest86 and 3DMark06 Test Results: Per suggestions in the comments, I ran the MemTest86 overnight and it cycled through the 8 GB of memory 5 times without error. I also ran the 3DMark06 test without a problem (see my scores at http://3dmark.com/3dm06/15163549). So... what now? :-) Any further suggestions on what to check? Is there some way to get a stack trace or something when the computer locks like that? Thanks

    Read the article

  • How to diagnose computer lockups and freezes?

    - by Scott Mitchell
    I built a desktop computer a couple years back with the following specs: CPU: Intel Core 2 Quad Q9300 Yorkfield 2.5GHz 6 MB L2 Cache LGA 775 95W Quad-Core Processor BX80580Q9300 Motherboard: EVGA 122-CK-NF68-T1 LGA 775 NVIDIA nForce 680i SLI ATX Intel Motherboard Video Card: Two EVGA 256-P2-N758-TR GeForce 8600GT SCC 256 MB 128-bit GDDR3 PCI Express x16 SLI Supported Video Card PSU: SeaSonic S12 Energy Plus SS-550HT 550W ATX12V V2.3 / EPS12V V2.91 SLI Certified CrossFire Ready 80 PLUS Certified Active PFC Power Supply Memory: Two G.SKILL 4 GB (2 x 2 GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL5D-4GBPQ Since its inception, the machine has periodically locked up, the regularity having varied over the years from once a day to once a month. Typically, lockups happen once every few days. By "lockup" I mean my computer just freezes. The screen locks up, I can't move the mouse. Hitting keys on my keyboard that normally turn LEDs on or off on the keyboard (such as Caps Lock) no longer turn the LEDs on or off. If there was music playing at the time of the lockup, noise keeps coming out of the speakers, but it's just the current frequency/note that plays indefinitely. There is no BSOD. When such a lockup occurs I have to do a hard reboot by either turning off the computer or hitting the reset button. I have the most recent version of the NVIDIA hardware drivers, and update them semi-regularly, but that hasn't seemed to help. I am currently using Windows 7 x64, but was previously using Windows Server 2003 x64 and having the same lockup issues. My guess is that it's somehow video driver or motherboard related, but I don't know how to go about diagnosing this problem to narrow down which of the two is the culprit. Additional information re: cooling Regarding cooling... I've not installed any after-market cooling systems aside from two regular fans I scavenged from an older computer. The fan atop the CPU is the one that shipped with it. One of the two scavenged fans I added it located at the bottom tower of the corner, in an attempt to create some airflow from front to back. The second fan is pointed directly at the two video cards. SpeedFan installation and readings Per studiohack's suggestion, I installed SpeedFan, which provided the following temperature readings: GPU: 63C GPU: 65C System: 76C CPU: 64C AUX: 36C Core 0: 78C Core 1: 76C Core 2: 79C Core 3: 79C Update #3: Another Lockup :-( Well, I had another lockup last night. :-( SpeedFan reported the CPU temp at 38 C when it happened, and there was no spike in temperature leading up to the freeze. One thing I notice is that the freeze seems more likely to happen if I am watching a video. In fact, of the last 5 freezes over the past month, 4 of them have been while watching a video on Flickr. Not necessarily the same video, but a video nevertheless. I don't know if this is just coincidence or if it means anything. (As an aside, each night before bedtime my 2 year old daughter sits on my lap and watches some home videos on Flickr and, in the last month, has learned the phrase, "Uh oh, computer broke.") Update #4: MemTest86 and 3DMark06 Test Results: Per suggestions in the comments, I ran the MemTest86 overnight and it cycled through the 8 GB of memory 5 times without error. I also ran the 3DMark06 test without a problem (see my scores at http://3dmark.com/3dm06/15163549). So... what now? :-) Any further suggestions on what to check? Is there some way to get a stack trace or something when the computer locks like that? Resolution I have never did figure out the particular problems, but based on the suggestions here and elsewhere, I'm presuming it was a motherboard issue. In any event, I recently upgraded my system, buying a new motherbeard, PSU, CPU, and RAM, and that new rig has been working splendidly the past several weeks. I am using the same graphic cards as in the old setup, so I think it's safe to reason that they weren't the cause of the problem.

    Read the article

  • Screen blink twice every 10 seconds on ubuntu 12.04

    - by Erik
    On 12.04 64-bit, about every 5 seconds my screen blinks twice. Even during installation of Ubuntu from CD, this happens during the complete process. I had no problems with earlier Ubuntu versions (earlier version was 10.04LTS 64-bit) System specs: I7-2600K MSI 7681 Motherboard 16 GB RAM 2 x Nvidia 560 card SLI (only 1 screen on 1 card active during install process) This flickering is driving me crazy, please help.

    Read the article

  • How do I resolve BSOD: PAGE_FAULT_IN_NONPAGED_AREA?

    - by Burnzy
    I have been trouble shooting this for a few days and cannot fix this anyhow. Computer specifications Mobo: ASUS Sabertooth X58 LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard CPU: Intel(R) Core(TM) i7 CPU 920 (Bloomfield) @ 2.67 ( no OC ) RAM: 6144MB RAM GPU: 2x NVIDIA GeForce GTS 250 1Go in SLI (sli is not enabled anyway at the moment anyway) Drives: OCZ RevoDrive OCZSSDPX-1RVD0120 PCI-E x4 120GB PCI Express MLC Internal SSD [RAID-0]. (I know this could potentilly cause trouble but I had the BSOD before using this drive) Seagate Barracuda 7200.11 ST31500341AS 1.5TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive - Bare Drive Click here for a log of a crash I just had. Click here for a log of a crash I had 30 minutes later, note that it's another driver. Some info Occurence: It seems pretty random so far, haven't noticed any kind of pattern I tried: Windows memory diagnostic (went smoothly at 1066mhz) As I said, it was still happening on my HDD, so when I bought the revodrive I install a new OS on there and still got the error, I believed it happened and I had no drivers installed at that point (not 100% sure) Change the following registry value to 1 (true): HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SessionManager \MemoryManagement\ClearPageFileAtShutdown Tried to lower even more ram clock Made sure ram timing was set to recommended by manufacturer Verified if motherboard was in good physical condition (yes and its brand new) There is one thing to note, when I got the new motherboard, I installed the new drivers WITHOUT formatting and the I removed the motherboard drivers that I could remove from the control panel (pretty much the first things that have been installed). Could this cause an issue even ON THE OTHER drive (revodrive). Hopefully someone can help me, I am getting tired of this, spending so much money and cannot get this to work correctly. If you need any other information let me know, thank you!

    Read the article

  • Hardware, network infrastructure for runnng gaming server nd on VirtualGL

    - by archer
    Foud nice project VirtualGL (http://www.virtualgl.org/). Tried to run 3D fames (EVE Online, Prototype) on server and display the output on thin client using 100Mbps network. Server: Gentoo Linux on AMD Phoenom II x6 3.4Gz, 8GB RAM, 2x NVIDIA 9800 GTX in single session with display resulution 1024x768 on client. Performance is very promising. Going to increase network speed to 1Gbps (using either Ethernet or Fiber) and run 5-6 clients simultenously. My questions are: a) what would be better for network - 1Gbps Ethernet or Fiber (clients are distributed in max 20m around server)? Is that a must to use managed switch for better network performance? b) Should I increase number of video cards to put in SLI on server (going to use Gigabyte GA-890FXA-UD7 which has 6 PCIExpress slots [2 x4, 2 x8 and 2 x16]). Will it impact performance significantly. If I need to increase the number of video cards - what would be better - put 2 banks of video cards with 3 in bank using SLI, or 3 banks with 2 in the bank? Would linux recognize that and properly use all banks of video cards? c) any suggestions on good thin clients supporting 1920x1080 HDMI video and 1Gbps network I understand that my questions can't be answered clearly (unless someone already managed to use this kind of stuff ;)) although any suggestions would be very helpful.

    Read the article

  • Win7 Ultimate 64bit not finding my SSD, any ideas?

    - by Jakub
    So I am trying to install Windows 7 Ultimate 64bit on my new SSD (Kingston SNVP325-S2/64GB) and I have unplugged my other drives (for the install only). The SSD is detected by BIOS, I am running the latest Firmware for my motherboard P5N-E SLI (775 socket). Upon getting the Windows 7 install screen, it gives me a 'no drives detected'. I have tried Load Driver and downloding nForce drivers (latest for Win7 64bit signed WHQL) results in a message of (something like) "To continue please click Load Driver and load 32-bit and signed 64-bit drivers... blah blah" ... basically it does NOT accept my nForce SATA drivers, nor my 2ndary SATA drivers (JMicron? can't recall the exact name now). I have tried F8 at loading to 'disable driver signing' in hopes that it was an unsigned driver, however nothing works. The SSD is not detected by the Windos 7 installer. I wasted 4 hours on this last night, and gave up, and got nowhere. Anyone heard / ran into this issue before? How can I get the drive detected? Some more details: - Kingston SNVP325-S2/64GB V+ SSD - ASUS P5N-E SLI MOBO - 8GB RAM A-DATA (memory is checked out and fine)

    Read the article

  • USB question (how durable is it, how should I workaround this)

    - by Shiki
    The plot is quite simple. Got a Razer mouse. If I plug it in, it works. After a shutdown/hibernation, I have to replug it entirely at the back of the PC. (It works in my laptop even after severel shutdown, etc, so yes I guess it's my motherboard.. but it still got 2 years of warranty and it comes with quad SLI, its not an old motherboard at all. (MSI P7N SLI FI (bought it after a hungarian guy's recommendation)). So. I only could come up with one "solution". Get 3 USB cable (you know, USB-USB). If its possible the shortest ones (don't know if the responsibility/anything will worsen), AND replug only the middle+closest to the USB port junction, since those are replaceable. What do you think? Any other idea? (BIOS is updated, mouse driver ... doesn't really matter, the mouse won't even blink a bit after this happens. It lights up and goes totally dead.)

    Read the article

  • computer freezes but music continues

    - by Danny
    Recently I have had a problem where my computer will freeze completely but if I happen to be streaming Pandora in a tab that will continue playing. If I wait about 2-5 minutes it will eventually come back and start working normally. I also noticed that during the period that it is unresponsive that the HDD activity light stays lit the whole time, not flashing. I've ran memtest86+ and a diagnostic from Western Digital for my HDD model and none of them reported any errors. The specs for my computer are 1 x ASRock H55M/USB3 R2.0 LGA 1156 Intel H55 HDMI USB 3.0 Micro ATX Intel Motherboard 1 x CORSAIR Enthusiast Series CMPSU-550VX 550W ATX12V V2.2 SLI Ready CrossFire Ready 80 PLUS Certified Active PFC Compatible with Core i7 Power Supply 1 x Intel Core i3-540 Clarkdale 3.06GHz LGA 1156 73W Dual-Core Desktop Processor Intel HD Graphics BX80616I3540 1 x G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Dual Channel Kit Desktop Memory Model F3-12800CL9D-4GBNQ 1 x ASUS PCE-N13 PCI Express 150/300Mbps Transfer/Receive Rate Wireless Adapter 1 x EVGA 01G-P3-1556-KR GeForce GTX 550 Ti (Fermi) FPB 1GB 192-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card I can't imagine what would be causing these problems.

    Read the article

  • 12.10 unable to install or even run from Live CD with nVidia GTX 580

    - by user99056
    I've used Ubuntu in the past (set up as web server, etc over in Iraq), so I'm not a 100% Linux Noob, however, I'm running into a brick wall here. I've got a machine I built when I got back to the US earlier this year, running Windows 7 Ultimate on it, and I've now got some free time and would like to transition over to Ubuntu full time. I've searched around in the forums, and there seems to be an issue with the nVidia graphics cards, so I've tried going to the EVGA site to see if I could find a new BIOS update for it and had no luck, so I'm back searching the forums here again and decided to just go ahead and post my question. My apologies if this is covered in another post and I was just unable to find it. I've found a few 'similar' posts, but nothing as bad as my issue. With the history aside, here is the actual detailed issue: I purchased a new SSD (Intel 520 SSD), arrived today, and I disconnect my old Windows 7 SSD. I had pre downloaded the ubuntu-12.10-desktop-amd64 earlier today and burned it to DVD. Upon inserting the Live CD into the computer and booting up, everything was fine up to the 'Run From Live CD' or 'Install Ubuntu Now' buttons. As I was sure I wanted to go ahead and make the switch, I selected the 'Install Now' from the right hand side. CD Spins up, black window pops up, and then the errors started: date/time GPU Lockup date/time Failed to idle channel 1 date/time PFIFO - playlist update failed date/time Failed to idle channel 2 date/time PFIFO - playlist update failed Thinking it might correct itself, I let it run and it would swap over to a GUI Screen that was locked up with major blurring/etc, then back to the command line with the errors. Eventually it said something along the lines of 'unknown status' and switched back to the GUI and froze. So, that's when I tried to see if I could find a BIOS upgrade for the nVidia GTX580 cards, and had no luck. So I thought, why not try to just run it from the Live CD and see if I can at least get a look at it, maybe if I could get it running try to do some sort of install from there and fix the driver issue. I rebooted, brought up the Live CD, and this time chose the left option / run from the CD. It brought me all the way in to the desktop, I saw my drives, the other icons, could move the mouse, etc for about 30 seconds and then it locked up completely. I've tried this a couple of times and get the same results every time. Hardware: Intel i7-3930K CPU @ 3.2GHz (12 CPUs) / MSI MS-7760 Motherboard / 32GB RAM / 2 x EVGA (nVidia) GeForce GTX 580 (4GB Ram each) So the question is: Is there any way to install 12.10 if you can't even get the Live CD to run (for more than 30 seconds)? My current hardware configuration is both of the GTX 580 cards have an SLI jumper on them, and I have 2 monitors on each card. (Ubuntu info obviously only shows on the main monitor from the failed installation and the attempt at running the Live CD). Perhaps opening the machine back up and removing the SLI Jumper and removing the other 3 monitors (so it only would have 1 video card with one monitor on it) would actually allow me to get 12.10 installed, then I could work on an nVidia Video Driver fix for the GTX 580, and then possibly hook up the other video card and monitors? Or is this something that they are currently aware of and may update with a future release in the next few days/weeks? Any thoughts or suggestions would be greatly appreciated, as I can't even try to fix the issue (assuming it is the nVidia drivers) if I can't even get it to install at all.

    Read the article

  • Computer wont install Windows Vista or Windows 7

    - by AsheeVee
    I had Windows Vista on my computer and wanted to upgrade to Windows 7 and thought that I would format my computer since it had been awhile. When I installed Windows 7 it wouldnt let me it would go through all the installation and then when my computer rebooted it would just be black screen with my mouse, I have tried mulitpule times now, and have just gone backs to Windows Vista, this no longer works and does the same thing as when I tried to insta I have a Nvidia GTX 275 video card, ASUS m2N-E SLI mother board,and a AMD 5200 Dual core processor

    Read the article

  • How much money can I save from installing a 80 plus bronze or gold PSU? [closed]

    - by David
    Currently I've only a 300 watt PSU and my pc is working like a charm but with all the components it should use the psu to the max. Recently I've read about 80 plus certificate and I'm wondering if it's worth to buy a 80 plus certificate psu? My power cost last year was also higher then before and my pc turns almost 14/7 a day. I mean power cost in used power not in augmented prices. I'm also planing to buy a SLI video card.

    Read the article

  • VM using a secondary graphic card

    - by Arthur
    Hi everyone, at the moment i have a dual monitor setup on my main PCIe gfx card. I know that on windows it is almost impossible to have a second card (eg no thrills PCI card) running without having an SLI motherboard because of a driver issue. Well this was my conclusion after many weeks of research. I was thinking...is it possible to use a VM in order to utilize the secondary card as the default video output to feed another monitor? let me know if you want me to clarify Thanks :)

    Read the article

  • Are there any issues with using an ATI 5870 on an nVidia motherboard?

    - by Liam
    I have an Alienware machine, so I'm not entirely sure on the make of motherboard, however, I do know it's got nforce on it and allows me to use nVidia cards in SLI. My 8800GTX has recently died and I'm looking to buy a replacement - I'm considering the ATI 5870, but what I want to know is, if I choose this card, does it mean I will need to change motherboard just to change graphics card vendor or does it not matter?

    Read the article

  • How to configure LAN controller to run at 1Gbps connectivity?

    - by Metro Smurf
    I have a few computers connected through a Gigabit router which show 1Gbps connections. However, one of the computers only shows 100Mbps connectivity even though it is capable of 1Gbps. I am not seeing an errors in the event viewer. Computer Specs Windows XP SP3 x86 A8N-SLI Premium MoBo Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller Driver: Marvell v11.24.3.3 (2/15/2010) Networking Specs Netgear RangeMax Premium Wireless-N Gigabit Router (WNR3500) CAT6 wiring Question: How can I configure the above computer to run at 1Gbps connectivity like the others?

    Read the article

  • CreateRenderTarget returns 0x80070057 in big surface resolution

    - by senggen
    I have created the SLI merged desktop of three 1920x1680 monitors, so the desktop resolution is 5760x1080. There is a 0x80070057 error, while calling CreateRenderTarget to create the RT_Surface: IDirect3DSurface9* _render_surface; HRESULT hr = _device->CreateRenderTarget( _desktop_width * 2, _desktop_height + 1, D3DFMT_A8R8G8B8, D3DMULTISAMPLE_NONE, 0, TRUE, &_render_surface, NULL); It works OK with desktop resolution 1024x768, and the total resolution is 3072x768. In http://msdn.microsoft.com/en-us/library/windows/desktop/bb174361(v=vs.85).aspx, it says If the method succeeds, the return value is D3D_OK. If the method fails, the return value can be one of the following: D3DERR_NOTAVAILABLE, D3DERR_INVALIDCALL, D3DERR_OUTOFVIDEOMEMORY, E_OUTOFMEMORY. and no description about 0x80070057. HRESULT: 0x80070057 (2147942487) Name: E_INVALIDARG Description: An invalid parameter was passed to the returning function Somebody please help me.

    Read the article

  • Kernel panic: "Machine check: processor context corrupt" after install

    - by Red
    I am new to Linux and I am having issues installing. I have tried multiple versions and all seem to give me the same issue. The LiveCD worked and I used it to install Ubuntu alongside Windows 7. Here's a few screen shots of what I get. I am currently trying to install most the most recent version of Ubuntu. System specs: x58 motherboard 12GB RAM Core i7 processor 2 Nvidia GTX 580 video cards in SLI configuration Thanks in advance and please feel free to simplify your answers as I am pretty new at this.

    Read the article

  • 5.1 surround sound for 12.04

    - by iwhorl
    I am very new to Ubuntu and linux as I have used windows only until yesterday. I am attempting to send my audio signal to my pioneer reciever using a single digital optical cable which is plugged into my M2N Sli Deluxe motherboard. I am sending video with a Geforce 8600gt video card through HDMI. That card does not support audio through HDMI. The only thing I have got to work so far is my left channel speaker acts as a stereo left and my sub woofer is trying to act as a stereo right. I was able to achieve this through altering the alsamixer settings. Can anyone point me in the right direction on this?

    Read the article

  • Display not using xorg.conf?

    - by mark kirby
    How can I force my PC to use the xorg.conf file ? I have it set up correctly and it is located at etc/x11/xorg.conf but it is ignored by at start up, I know the file is valid as I created it using nvidia-settings. I just do not know why it is been ignored. Thanks for any help Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Vestel 40 FHD_LCD-TV" HorizSync 15.0 - 46.0 VertRefresh 49.0 - 61.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 650" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-0" Option "metamodes" "1920x1080_60 +0+0" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • Unable to boot from new SSD after installing from USB

    - by user73725
    I'm using a new SSD with nothing on it. It's installed via USB drive, and boots from USB as well. While in Ubuntu I can see the SSD and other devices. When I install from the desktop (have tried from the boot screen as well), system restarts. It takes me to the boot screen, select boot from first hard disk, nothing, goes right back to boot screen. When I take the USB out, it hangs on "Verifing DMI." If I boot onto the USB I can see the correct files located in the SSD. I have a basic knowledge of computers. Give me any thing you think would help. No other OS's are loaded. Gigabyte ga-k8n-sli 1GB RAM AMD Athlon 64 x2 dual core 3800+ OCZ SSD Agility 3 120GB

    Read the article

  • xfx 680i motherboard failure?

    - by Ian
    At some point last night we must have had a blip in our power, as the stove clock was blinking like it would had their been... a blip in the power. When I came into my office this morning, my desktop computer was powered down and would not turn on. Cracking the case, I can see a small blue blinking light on the front right corner of the motherboard. Unplugging the power from the PSU causes the blinking to stop. Plugging in the power causes the blinking to resume. Pressing the power button does nothing. Does anyone know what this blinking blue light means? I'm mostly curious now if it's the motherboard that has gone bad, or the power supply. I don't have any other desktop parts to use to troubleshoot these components. Any ideas? My motherboard is an XFX NFORCE 680I SLI INTEL SOCKET 775 DDR2 ( Model #: MB-N680-ISH9 )

    Read the article

< Previous Page | 1 2 3 4 5  | Next Page >