Search Results

Search found 39 results on 2 pages for 'smc'.

Page 2/2 | < Previous Page | 1 2 

  • Looking for updated BIOS for '99 Gateway in order to format/recognize >127 GB HD

    - by Jeff
    I have a '99 Gateway that's apparently too old for even Gateway to acknowledge it exists. Want to use it as a media hub and put in a 320GB HD, but it will not format above 127GB even running Win XP SP3. Read somewhere that upgrading the BIOS may do the trick, but I can't find the correct BIOS, and GW has been no help. Hoping I can just upgrade the BIOS, which is 11 years old. Any help would be much appreciated! I don't know where to look, and searches have been fruitless. System info: OS Name Microsoft Windows XP Home Edition Version 5.1.2600 Service Pack 3 Build 2600 OS Manufacturer Microsoft Corporation System Name xxxx System Manufacturer Gateway System Model TABOR_II System Type X86-based PC Processor x86 Family 6 Model 7 Stepping 3 GenuineIntel ~596 Mhz BIOS Version/Date Intel Corp. 4W4SB0X0.15A.0015.P10, 9/28/1999 SMBIOS Version 2.1 BIOS info (from a free app I located): BIOS Type: Phoenix BIOS Date: September 28th 1999 BIOS ID: 4W4SB0X0.15A.0015.P10.9909281445-None BIOS OEM: 4W4SB0X0.15A.0015.P10 Chipset: Intel 440BX/ZX rev 3 SuperIO: SMC 70x or 80x rev 0 at port 0370 Manufacturer: Gateway Motherboard: WS440BX

    Read the article

  • Symantec Endpoint Protection Virus Definitions

    - by Gus Denton
    I have done some Googling but I cannot get a definitive answer certainly not from the Symantec KB. I have a Virtualised Win 2003R2 server 32bit. It has been provisioned to me with Symantec Endpoint Protection 11.0.62xxx CLIENT (not a definitions server) the directory C:\Program Files\Common Files\Symantec Shared\VirusDefs is 750MB IT doesn't contain .tmp directories so it is NOT a corrupt definitions server. IT does contain directories named with a date pattern YYYYMMDD.xxx Some of these folders are 12 months old and I would like to recover the space. The sysmantect forums are full of this stuff but a lot of the postings contain links back to documents that are not specific to End Point Protection Client. It appears that I should be able to delete the older folders and all will be OK. with a service restart however there is a warning about having Live Update Administrator Installed Firstly I have no idea if I have this installed how to I check and secondly can I just ditch these old files and restart ? Regards Gus Denton Learning and Teaching Uni of New South Wales Sydney Australia For those trying to assist me I thankyou. I have followed some instructions found on the Symantec site and assumed that the response from Nixphoe would resolve my issue. It appears that as I am on a provisioned VM from a central IT unit I cannot run the Symantec commands from the Run prompt as my admin creds to get me in. (smc -stop) Basically I need to claw back some Diskspace from the c: drive which is being filed up with WSUS patches and Symantec files. I have managed to delete one symantec cache through the live update control panel and recovered 470Mb I suppose my last question for those more experienced than myself is, can I simply remove say the two oldest virus definition folders without completely foobaring the End Point protection and the server ? Regards Gus

    Read the article

  • Symantec Endpoint Protection Virus Definitions

    - by Gus Denton
    I have done some Googling but I cannot get a definitive answer certainly not from the Symantec KB. I have a Virtualised Win 2003R2 server 32bit. It has been provisioned to me with Symantec Endpoint Protection 11.0.62xxx CLIENT (not a definitions server) the directory C:\Program Files\Common Files\Symantec Shared\VirusDefs is 750MB IT doesn't contain .tmp directories so it is NOT a corrupt definitions server. IT does contain directories named with a date pattern YYYYMMDD.xxx Some of these folders are 12 months old and I would like to recover the space. The sysmantect forums are full of this stuff but a lot of the postings contain links back to documents that are not specific to End Point Protection Client. It appears that I should be able to delete the older folders and all will be OK. with a service restart however there is a warning about having Live Update Administrator Installed Firstly I have no idea if I have this installed how to I check and secondly can I just ditch these old files and restart ? Regards Gus Denton Learning and Teaching Uni of New South Wales Sydney Australia For those trying to assist me I thankyou. I have followed some instructions found on the Symantec site and assumed that the response from Nixphoe would resolve my issue. It appears that as I am on a provisioned VM from a central IT unit I cannot run the Symantec commands from the Run prompt as my admin creds to get me in. (smc -stop) Basically I need to claw back some Diskspace from the c: drive which is being filed up with WSUS patches and Symantec files. I have managed to delete one symantec cache through the live update control panel and recovered 470Mb I suppose my last question for those more experienced than myself is, can I simply remove say the two oldest virus definition folders without completely foobaring the End Point protection and the server ? Regards Gus

    Read the article

  • Explorer.exe not starting after login on Windows Server 2003 (Terminal Services and console)

    - by Pepperoni Icecream
    When users login to a Windows Server 2003 R2 running Terminal Services they have a blank desktop. Upon inspection, explorer.exe is not running. When I login as administrator, using either RDP or to the console, I am having the same issue. I can pull up the taskman and start explorer.exe manually. I have another Terminal Server setup exactly the same way (same apps, settings, GPO, etc . . .) the only difference is we deployed Symantec Endpoint Client 11.0.5 on Friday. For some reason the working Terminal Server is still on 11.0.4, but the suspect server received the 11.0.5 client upgrade. I checked the eventviewer for any relevant explorer.exe entries to no avail. It seems that if SEP is preventing explorer.exe from starting at login it would do the same for the domain admin starting explorer.exe from the taskman. I disabled the SEP client and services on the server and issued smc -stop and tried logging in again. Still no explorer.exe. So I'm not sure if the client upgrade is relevant but it is worth mentioning since that was the last system change. The 2 servers are members of a NLB group. I took the bad terminal server out of the group until the issue is resolved. Actually stopped the host using NLB manager Any help is appreciated.

    Read the article

  • Samba Public and "Dropbox" folder

    - by cb0
    I want to create a special Group Directory structure for my Users. /home/groupA <-- home folder for groupA where every user of groupA can create/edit/delete files /home/groupA/Public <-- Public Folder where every user can read files /home/groupA/Public/Dropbox <-- Folder where every user can write files but only users of groupA can access this directory and create/edit/delete files Now I have: 4 drwxrwx--t 10 nobody groupA 4096 Feb 18 15:44 /home/groupA 4 drwxrwxr-x 7 nobody groupA 4096 Feb 18 15:40 /home/groupA/Public/ 4 drwxrwx-w- 10 nobody groupA 4096 Feb 18 15:55 /home/groupA/Public/Dropbox My smc.confcontains the following entrys [groupA] path = /home/groupA comment = Folder for users of groupA browseable = yes read only = no create mask = 0770 directory mask = 0770 force group = groupA [groupA Public] path = /home/groupA/Public comment = Admins Public Browseable = yes write list = @groupA create mask = 0775 directory mask = 0775 [groupA DropBox] path = /home/groupA/Public/Dropbox comment = groupA Dropbox read only = no valid users = @groupA browseable = yes inherit owner = yes directory mode = 3770 force directory mode = 3770 The working part is: Users of groupA can access and fully use /home/groupA All Users can access /home/groupA/Public/ and read the files from there. My problem is that all users, even those who are not in groupA can access the /home/groupA/Public/Dropbox and see all files. I just want them to be able to put files in there but not see the content of the folder and prohibit them from deleting any files in there. Does anybody have a clue what could be the problem and how I can fix it ?

    Read the article

  • Macbook Pro - Randomly sleeps and won't wake up

    - by James
    All, I have a Macbook Pro 13" (mid 2009) that has had a long time issues which seems to be getting worse. Occasionally, I will go to wake the computer with the keyboard and can't wake it. The HDD spins up, the light on the front of the computer stops blinking, but as soon as it seems like the display should light up, the HDD stops and the light begins blinking again. More rarely, the computer will suddenly sleep while I am using it and then enters the same sleep loop. The only way to resume working on the computer is to wait. Doing a hard restart just puts it right back into the 'sleep loop.' Here is an excerpt from kernel.log showing the laptops apparent narcolepsy: Jun 5 22:20:40 james-hales-macbook-pro kernel[0]: Wake reason: OHC1 Jun 5 22:20:40 james-hales-macbook-pro kernel[0]: Previous Sleep Cause: 5 Jun 5 22:20:40 james-hales-macbook-pro kernel[0]: The USB device Apple Internal Keyboard / Trackpad (Port 6 of Hub at 0x4000000) may have caused a wake by issuing a remote wakeup (2) Jun 5 22:20:40 james-hales-macbook-pro kernel[0]: HID tickle 31 ms Jun 5 22:20:41 james-hales-macbook-pro kernel[0]: 00000000 00000020 NVEthernet::setLinkStatus - not Active Jun 5 22:20:45 james-hales-macbook-pro kernel[0]: MacAuthEvent en1 Auth result for: 20:4e:7f:48:c0:ef MAC AUTH succeeded Jun 5 22:20:45 james-hales-macbook-pro kernel[0]: wlEvent: en1 en1 Link UP Jun 5 22:20:45 james-hales-macbook-pro kernel[0]: AirPort: Link Up on en1 Jun 5 22:20:45 james-hales-macbook-pro kernel[0]: en1: BSSID changed to 20:4e:7f:48:c0:ef Jun 5 22:20:46 james-hales-macbook-pro kernel[0]: AirPort: RSN handshake complete on en1 Jun 5 22:20:48 james-hales-macbook-pro kernel[0]: 00000000 00000020 NVEthernet::setLinkStatus - not Active Jun 5 22:20:54 james-hales-macbook-pro kernel[0]: Jun 5 22:20:55 james-hales-macbook-pro kernel[0]: Wake reason: OHC1 Jun 5 22:20:55 james-hales-macbook-pro kernel[0]: Previous Sleep Cause: 5 Jun 5 22:20:55 james-hales-macbook-pro kernel[0]: The USB device Apple Internal Keyboard / Trackpad (Port 6 of Hub at 0x4000000) may have caused a wake by issuing a remote wakeup (2) Jun 5 22:20:55 james-hales-macbook-pro kernel[0]: wlEvent: en1 en1 Link DOWN Jun 5 22:20:55 james-hales-macbook-pro kernel[0]: AirPort: Link Down on en1. Reason 4 (Disassociated due to inactivity). Jun 5 22:20:55 james-hales-macbook-pro kernel[0]: HID tickle 26 ms Jun 5 22:20:55 james-hales-macbook-pro kernel[0]: 00000000 00000020 NVEthernet::setLinkStatus - not Active Jun 5 22:20:58 james-hales-macbook-pro kernel[0]: MacAuthEvent en1 Auth result for: 20:4e:7f:48:c0:ef MAC AUTH succeeded Jun 5 22:20:58 james-hales-macbook-pro kernel[0]: wlEvent: en1 en1 Link UP Jun 5 22:20:58 james-hales-macbook-pro kernel[0]: AirPort: Link Up on en1 Jun 5 22:20:58 james-hales-macbook-pro kernel[0]: en1: BSSID changed to 20:4e:7f:48:c0:ef Jun 5 22:20:58 james-hales-macbook-pro kernel[0]: AirPort: RSN handshake complete on en1 Jun 5 22:21:02 james-hales-macbook-pro kernel[0]: 00000000 00000020 NVEthernet::setLinkStatus - not Active Jun 5 22:21:08 james-hales-macbook-pro kernel[0]: I have tried reseting the SMC and reinstalling Lion (short of erasing and installing) to no avail. The Genius bar has insisted that the problem would be resolved by reinstalling Lion (which they did, but didn't fix anything, still insisting...). Please don't say "logic board." Thoughts?

    Read the article

  • OSX 10.6.6 SSH md5 break-in check

    - by Alex
    Information Recently one of the linux servers that I access was compromised to steal passwords and ssh keys using a modified ssh binary. This lead me to question if the attacker had compromised my OSX Laptop which had ssh access turned on. A sophos virus scan turned up nothing, and I did not have rkhunter installed before the attack, so I could not compare hashes of the system binaries to be sure. However because OSX is relatively standard for each of their major releases, I asked fiends for md5 hashes md5 /usr/bin/ssh and md5 /usr/sbin/sshd as a basic first check to see if there was anything different about my machine. A few emails later I have found the following data: Version (Arch) [N] MD5 (/usr/bin/ssh) MD5 (/usr/sbin/sshd) OSX 10.5.8 (PPC) [3] 1e9fd483eef23464ec61c815f7984d61 9d32a36294565368728c18de466e69f1 OSX 10.5.8 (intel) [5] 1e9fd483eef23464ec61c815f7984d61 9d32a36294565368728c18de466e69f1 OSX 10.6.x (intel) [7] 591fbe723011c17b6ce41c537353b059 e781fad4fc86cf652f6df22106e0bf0e OSX 10.6.x (intel) [4] 58be068ad5e575c303ec348a1c71d48b 33dafd419194b04a558c8404b484f650 Mine 10.6.6 (intel) df344cc00a294c91230c65e8b7332a79 b5094ccf4cd074aaf573d4f5df75906a where N is the number of machines with with that MD5, and the last row is my laptop. The sample is relatively heterogeneous spaning a few years of different makes and models of Apples, and different versions of 10.6.x. The different hash for my system made me worried that these binaries might have been compromised. So I made sure that my backup for the week was good, and dived into formatting my system and reinstalling OSX. After reinstalling OSX from the manufacturer DVD, I found that the MD5 hash did not change for either ssh, or sshd. Goal Make sure that my system is does not have any malicious software. Should I be worried that this base install of OSX (with no other software installed) has been compromised? I have also updated my system to 10.6.6 and found no change as well. Other Information I am not sure if this is helpful information, but my laptop is a i7 15 inch MacBook Pro bought in Nov 2010, and here is some output from system_profiler: System Software Overview: System Version: Mac OS X 10.6.6 (10J567) Kernel Version: Darwin 10.6.0 64-bit Kernel and Extensions: No Time since boot: 1:37 Hardware: Hardware Overview: Model Name: MacBook Model Identifier: MacBook6,2 Processor Name: Intel Core i7 Processor Speed: 2.66 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache (per core): 256 KB L3 Cache: 4 MB Memory: 4 GB Processor Interconnect Speed: 4.8 GT/s Boot ROM Version: MBP61.0057.B0C SMC Version (system): 1.58f16 Sudden Motion Sensor: State: Enabled On the laptop, I find: $ codesign -vvv /usr/bin/ssh /usr/bin/ssh: valid on disk /usr/bin/ssh: satisfies its Designated Requirement $ codesign -vvv /usr/sbin/sshd /usr/sbin/sshd: valid on disk /usr/sbin/sshd: satisfies its Designated Requirement $ ls -la /usr/bin/ssh -rwxr-xr-x 1 root wheel 1001520 Feb 11 2010 /usr/bin/ssh $ ls -la /usr/sbin/sshd -rwxr-xr-x 1 root wheel 1304800 Feb 11 2010 /usr/sbin/sshd $ ls -la /sbin/md5 -r-xr-xr-x 1 root wheel 65232 May 18 2009 /sbin/md5 Update So far I have not gotten an answer about this question, but if you could help by increasing the number of hashes that I can compare against, that would be great. To get hashes, and version numbers, run the following on osx: md5 /usr/bin/ssh md5 /usr/sbin/sshd ssh -V sw_vers

    Read the article

  • WinXP - Having trouble sharing internet with 3G USB modem via ICS

    - by Carlos Nunez
    all! I've been banging my head against a wall with this issue for a few days now and am hoping someone can help out. I recently signed up for T-Mobile's webConnect 3G/4G service to replace the faltering (and slow) DSL connection in my apartment. The goal was to put the SIM in one of my old phones and use its built-in WLAN tethering feature to share Internet out to rest of my computers. I quickly found out that webConnect-provisioned SIMs do not work with regular smartphones, so I was forced to either buy a 4G-compatible router or tether one of my old laptops to my wireless router and share out that way. I chose the latter, and it's sharpening my inner masochistic self by the day. Here's the setup: GSM USB modem (via hub), ICS host - 10/100 Mbps Ethernet NIC, ICS "guest" - WAN port of my SMC WGBR14N wireless router in bridged mode (i.e. wireless access point). Ideally, this would make my laptop the DHCP server and internet gateway with the WAP giving everyone wireless coverage. I can browse internet on the host laptop fine. However, when clients try to connect, they get a DHCP-assigned IP from the laptop and are able to use the Internet for a few minutes before completely dying. After that happens, they are able to re-associate with the WAP and get IP addresses, but are unable to use Internet or resolve IP addresses until the laptop and router are restarted. If they do get access, it's very, very slow. After running Wireshark on the host machine, it turns out that this is because every TCP connection keeps getting RST. DNS seems to work. I would normally think the firewall is the culprit here, but when it drops packets, it drops them completely. The fact that TCP connections are being ACK'ed by the destination rules that out. Of course, none of the event Log isn't saying anything about what's going on. I also tried disabling power management on the NIC, since that's caused problems in the past; that didn't help either. I finally disabled receive-side scaling as per a Microsoft KB (that applied to Windows Server 2003, SP2) to no avail. I'm thinking of trying it with a different NIC (will be tough; don't have a spare Ethernet NIC around for the laptop), but I'm getting the impression that this simply doesn't work. Can anyone please advise? I apologise for the length of this post; all contributions are much appreciated! -Carlos.

    Read the article

  • Ok it has been pointed out to me

    - by Ratman21
    That it seems my blog is more of poor me or pity me or I deserve a job blog.   Hmmm I wont say, I have not wined here as I have used this blog to vent my frustration on the whole out of work thing (lack of money, self worth, family issues and the never end bills coming my way) but, it was also me trying to reach to others in the same boat as well as advertising, hay I am out here, employers.   It was also said, that I don’t have any thing listed here on me, like a cover letter or resume. Well there is but, it was so many months and post ago. Also what I had posted is not current. So here is my most current cover and resume.   Scott L Newman 45219 Dutton Way Callahan, Fl. 32011 To Whom It May Concern: I am really interested in the IT vacancie that you have listed for your company. Maybe I don’t have all the qualifications you want (hold on don’t hit delete yet) yet! But maybe I do, as I have over 20 + years experience in "IT” RIGHT NOW.   Read the rest of my cover and my resume. You will see what my “IT” skills are and it will Show that I can to this work! I can bring to your company along with my, can do attitude, a broad range of skills, including: Certified CompTIA A+, Security+  and Network+ Technician §         2.5 years (NOC) Network experience on large Cisco based Wan – UK to Austria §         20 years experience MIS/DP – Yes I can do IBM mainframes and Tandem  non-stops too §         18 years experience as technical Help Desk support – panicking users, no problem §         18 years experience with PC/Server based system, intranet and internet systems §         10+ years experienced on: Microsoft Office, Windows XP and Data Network Fundamentals (YES I do windows) §         Strong trouble shooting skills for software, hard ware and circuit issues (and I can tell you what kind of horrors I had to face on all of them). §         Very experienced on working with customers on problems – again panicking users, no problem §         Working experience with Remote Access (VPN/SecurID) – I didn’t just study them I worked on/with them §         Skilled in getting info for and creating documentation for Operation procedures (I don’t just wait for them to give it to me I go out and get it. Waiting for info on working applications is, well dumb) Multiple software languages (Hey I have done some programming) And much more experiences in “IT” (Mortgage, stocks and financial information systems experience and have worked “IT” in a hospital) Can multitask, also have ability to adapt to change and learn quickly. (once was put in charge of a system that I had not worked with for over two years. Talk about having to relearn and adapt to changes but, I did it.) I would welcome the opportunity to further discuss this position with you. If you have questions or would like to schedule an interview, please contact me by phone at 904-879-4880 or on my cell 352-356-0945 or by e-mail at [email protected] or leave a message on my web site (http://beingscottnewman.webs.com/). I have enclosed/attached my resume for your review and I look forward to hearing from you.   Thank you for taking a moment to consider my cover letter and resume. I appreciate how busy you are. Sincerely, Scott L. Newman    Scott L. Newman 45219 Dutton Way, Callahan, FL 32011? H (904)879-4880 C (352)356-0945 ? [email protected] Web - http://beingscottnewman.webs.com/                                                       ______                                                                                       OBJECTIVE To obtain a Network Operation or Helpdesk position.     PROFILE Information Technology Professional with 20+ years of experience. Volunteer website creator and back-up sound technician at True Faith Christian Fellowship. CompTIA A+, Network+ and Security+ Certified.   TECHNICAL AND PROFESSIONAL SKILLS   §         Technical Support §         Frame Relay §         Microsoft Office Suite §         Inventory Management §         ISDN §         Windows NT/98/XP §         Client/Vendor Relations §         CICS §         Cisco Routers/Switches §         Networking/Administration §         RPG §         Helpdesk §         Website Design/Dev./Management §         Assembler §         Visio §         Programming §         COBOL IV §               EDUCATION ? New HorizonsComputerLearningCenter, Jacksonville, Florida – CompTIA A+, Security+ and Network+ Certified.             Currently working on CCNA Certification ?MottCommunity College, Flint, Michigan – Associates Degree - Data Processing and General Education ? Currently studying Japanese     PROFESSIONAL             TrueFaithChristianFellowshipChurch – Callahan, FL, October 2009 – Present Web site Tech ·        Web site Creator/tech, back up song leader and back up sound technician. Note church web site is (http://ambassadorsforjesuschrist.webs.com/) U.S. Census (temp employee) Feb. 23 to March 8, 2010 ·        Enumerator for NassauCounty   ThomasCreekBaptistChurch – Callahan, FL,     June 2008 – September 2009 Churchsound and video technician      ·        sound and video technician           Fidelity National Information Services ? Jacksonville, FL ? February 01, 2005 to October 28, 2008 Client Server Dev/Analyst I ·        Monitored Multiple Debit Card sites, Check Authorization customers and the Card Auth system (AuthNet) for problems with the sites, connections, servers (on our LAN) and/or applications ·        Night (NOC) Network operator for a large Wide Area Network (WAN) ·        Monitored Multiple Check Authorization customers for problems with circuits, routers and applications ·        Resolved circuit and/or router issues or assist circuit carrier in resolving issue ·        Resolved application problems or assist application support in resolution ·        Liaison between customer and application support ·        Maintained and updated the NetOps Operation procedures Guide ·        Kept the listing of equipment on the raised floor updated ·        Involved in the training of all Night Check and Card server operation operators ·        FNIS acquired Certegy in 2005. Was one of 3 kept on.   Certegy ? St.Pete, FL ? August 31, 2003 to February 1, 2005 Senior NetOps Operator(FNIS acquired Certegy in 2005 all of above jobs/skills were same as listed in FNIS) ·        Converting Documentation to Adobe format ·        Sole trainer of day/night shift System Management Center operators (SMC) ·        Equifax spun off Card/Check Dept. as Certegy. Certegy terminated contract with EDS. One of six in the whole IT dept that was kept on.   EDS  (Certegy Account) ? St.Pete, FL ? July 1, 1999 to August 31, 2003 Senior NetOps Operator ·        Equifax outsourced the NetOps dept. to EDS in 1999. ·        Same job skills as listed above for FNIS.   Equifax ? St.Pete&Tampa, FL ? January 1, 1991 to July 1, 1999 NetOps/Tandem Operator ·        All of the above for FNIS, except for circuit and router issues ·        Operated, monitored and trouble shot Tandem mainframe and servers on LAN ·        Supported in the operation of the Print, Tape and Microfiche rooms ·        Equifax acquired TelaCredit in 1991.   TelaCredit ? Tampa, FL ? June 28, 1989 to January 1, 1991 Tandem Operator ·        Operated and monitored Tandem Non-stop systems for Card and Check Auths ·        Operated multiple high-speed Laser printers and Microfiche printers ·        Mounted, filed and maintained 18 reel-to-reel mainframe tape drives, cartridges tape drives and tape library.

    Read the article

  • Adding Parsekit To An Xcode Project

    - by Garry
    I am trying to add the Parsekit framework to my OSX Xcode project. I've never added a 3rd party framework before and I can't get it to work right. I dragged the included Xcode project into my 'Groups & Files' pane and chose to Add it to my project. I then dragged Parsekit.framework underneath the Link Binary With Libraries heading. Then I double-clicked my target app and added Parsekit as a Direct Dependency. I also added libicucore.dylib as a Linked Library (as it says to do this on their site). Finally, in the Build settings tab of my target info I set the Header Search Paths to /Users/path/to/include/directory and the Other Linker Flags to -ObjC -all_load. Running this as a debug build work fine with no errors. However, when I build my app to release and then try to run the executable created, the app fails to load with the following error message: MyApp cannot be opened because of a problem. Check with the developer to make sure myApp works with this version of Mac OS X. Here is the dump from the crash reporter: Process: MyApp [11658] Path: /Users/Garry/Programming/Xcode/Mac/MyApp/build/Release/MyApp.app/Contents/MacOS/MyApp Identifier: com.yourcompany.MyApp Version: ??? (???) Code Type: X86-64 (Native) Parent Process: launchd [135] Date/Time: 2010-05-24 17:08:08.475 +0100 OS Version: Mac OS X 10.6.3 (10D573) Report Version: 6Interval Since Last Report: 133300 sec Crashes Since Last Report: 3 Per-App Crashes Since Last Report: 3 Anonymous UUID: DF0265E4-B5A0-45E1-8B71-D52A27CFDDCA Exception Type: EXC_BREAKPOINT (SIGTRAP) Exception Codes: 0x0000000000000002, 0x0000000000000000 Crashed Thread: 0 Dyld Error Message: Library not loaded: @executable_path/../Frameworks/ParseKit.framework/Versions/A/ParseKit Referenced from: /Users/Garry/Programming/Xcode/Mac/MyApp/build/Release/MyApp.app/Contents/MacOS/MyApp Reason: image not found Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core 2 Duo, 2.53 GHz, 4 GB, SMC 1.47f2 Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB Memory Module: global_name AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.91.27) Bluetooth: Version 2.3.1f4, 2 service, 2 devices, 1 incoming serial ports Network Service: AirPort, AirPort, en1 Network Service: Ethernet Adaptor (en6), Ethernet, en6 Serial ATA Device: Hitachi HTS545025B9SA02, 232.89 GB Serial ATA Device: HL-DT-ST DVDRW GS23N USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24400000 USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0x26500000 USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000 USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0237, 0x04600000 USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8213, 0x06110000 After building the app, in addition to the executable file, Xcode is also creating a file called MyApp.app.dSYM. Any idea what that is?? I am developing with Xcode 3.2.2 on an Intel MBP running 10.6.3. Many thanks for any help offered.

    Read the article

  • OS X 10.9 Mavericks Kernel Panics out of the box

    - by Kevin
    OS X Kernel panics after a fresh install of OS X 10.9 on a 17" Macbook Pro. Anonymous UUID: D002464D-24B7-C2B5-3D83-1C0B02873B29 Wed Oct 30 11:08:17 2013 panic(cpu 1 caller 0xffffff8006edc19e): Kernel trap at 0xffffff7f88e0a96c, type 14=page fault, registers: CR0: 0x000000008001003b, CR2: 0xffffef7f88e309b8, CR3: 0x0000000009c2d000, CR4: 0x0000000000000660 RAX: 0x0fffffd0c7b30000, RBX: 0xffffef7f88e309b0, RCX: 0x0000000000000001, RDX: 0x000002f384d06471 RSP: 0xffffff80eff03d80, RBP: 0xffffff80eff03e70, RSI: 0x0000031384cfb168, RDI: 0xffffff80e8f05148 R8: 0xffffff801b0f8670, R9: 0x0000000000000005, R10: 0x0000000000004a24, R11: 0x0000000000000202 R12: 0xffffff801938b800, R13: 0x0000000000000005, R14: 0xffffff80e8f05148, R15: 0xffffff7f88e2ee20 RFL: 0x0000000000010006, RIP: 0xffffff7f88e0a96c, CS: 0x0000000000000008, SS: 0x0000000000000010 Fault CR2: 0xffffef7f88e309b8, Error code: 0x0000000000000002, Fault CPU: 0x1 Backtrace (CPU 1), Frame : Return Address 0xffffff80eff03a10 : 0xffffff8006e22f69 0xffffff80eff03a90 : 0xffffff8006edc19e 0xffffff80eff03c60 : 0xffffff8006ef3606 0xffffff80eff03c80 : 0xffffff7f88e0a96c 0xffffff80eff03e70 : 0xffffff7f88e09b89 0xffffff80eff03f30 : 0xffffff8006edda5c 0xffffff80eff03f50 : 0xffffff8006e3757a 0xffffff80eff03f90 : 0xffffff8006e378c8 0xffffff80eff03fb0 : 0xffffff8006ed6aa7 Kernel Extensions in backtrace: com.apple.driver.AppleIntelCPUPowerManagement(216.0)[A6EE4D7B-228E-3A3C-95BA-10ED6F331236]@0xffffff7f88e07000->0xffffff7f88e31fff BSD process name corresponding to current thread: kernel_task Mac OS version: 13A603 Kernel version: Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64 Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393 Kernel slide: 0x0000000006c00000 Kernel text base: 0xffffff8006e00000 System model name: MacBookPro5,2 (Mac-F2268EC8) System uptime in nanoseconds: 4634353513870 last loaded kext at 39203945245: com.viscosityvpn.Viscosity.tun 1.0 (addr 0xffffff7f89200000, size 32768) last unloaded kext at 147930318702: com.apple.driver.AppleFileSystemDriver 3.0.1 (addr 0xffffff7f89110000, size 8192) loaded kexts: com.viscosityvpn.Viscosity.tun 1.0 com.viscosityvpn.Viscosity.tap 1.0 com.apple.driver.AudioAUUC 1.60 com.apple.driver.AppleHWSensor 1.9.5d0 com.apple.filesystems.autofs 3.0 com.apple.iokit.IOBluetoothSerialManager 4.2.0f6 com.apple.driver.AGPM 100.14.11 com.apple.driver.AppleMikeyHIDDriver 124 com.apple.driver.AppleHDA 2.5.2fc2 com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6 com.apple.GeForceTesla 8.1.8 com.apple.driver.AppleMikeyDriver 2.5.2fc2 com.apple.iokit.IOUserEthernet 1.0.0d1 com.apple.driver.AppleUpstreamUserClient 3.5.13 com.apple.driver.AppleMuxControl 3.4.12 com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0 com.apple.driver.AppleSMCLMU 2.0.4d1 com.apple.Dont_Steal_Mac_OS_X 7.0.0 com.apple.driver.AppleHWAccess 1 com.apple.driver.AppleMCCSControl 1.1.12 com.apple.driver.AppleLPC 1.7.0 com.apple.driver.SMCMotionSensor 3.0.4d1 com.apple.driver.AppleUSBTCButtons 240.2 com.apple.driver.AppleUSBTCKeyboard 240.2 com.apple.driver.AppleIRController 325.7 com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1 com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1 com.apple.BootCache 35 com.apple.iokit.SCSITaskUserClient 3.6.0 com.apple.driver.XsanFilter 404 com.apple.iokit.IOAHCIBlockStorage 2.4.0 com.apple.driver.AppleUSBHub 650.4.4 com.apple.driver.AppleUSBEHCI 650.4.1 com.apple.driver.AppleFWOHCI 4.9.9 com.apple.driver.AirPort.Brcm4331 700.20.22 com.apple.driver.AppleAHCIPort 2.9.5 com.apple.nvenet 2.0.21 com.apple.driver.AppleUSBOHCI 650.4.1 com.apple.driver.AppleSmartBatteryManager 161.0.0 com.apple.driver.AppleRTC 2.0 com.apple.driver.AppleHPET 1.8 com.apple.driver.AppleACPIButtons 2.0 com.apple.driver.AppleSMBIOS 2.0 com.apple.driver.AppleACPIEC 2.0 com.apple.driver.AppleAPIC 1.7 com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0 com.apple.nke.applicationfirewall 153 com.apple.security.quarantine 3 com.apple.driver.AppleIntelCPUPowerManagement 216.0.0 com.apple.kext.triggers 1.0 com.apple.iokit.IOSerialFamily 10.0.7 com.apple.AppleGraphicsDeviceControl 3.4.12 com.apple.driver.DspFuncLib 2.5.2fc2 com.apple.vecLib.kext 1.0.0 com.apple.iokit.IOAudioFamily 1.9.4fc11 com.apple.kext.OSvKernDSPLib 1.14 com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6 com.apple.iokit.IOSurface 91 com.apple.iokit.IOBluetoothFamily 4.2.0f6 com.apple.nvidia.classic.NVDANV50HalTesla 8.1.8 com.apple.driver.AppleSMBusPCI 1.0.12d1 com.apple.driver.AppleGraphicsControl 3.4.12 com.apple.driver.IOPlatformPluginLegacy 1.0.0 com.apple.driver.AppleBacklightExpert 1.0.4 com.apple.iokit.IOFireWireIP 2.2.5 com.apple.driver.AppleHDAController 2.5.2fc2 com.apple.iokit.IOHDAFamily 2.5.2fc2 com.apple.driver.AppleSMBusController 1.0.11d1 com.apple.nvidia.classic.NVDAResmanTesla 8.1.8 com.apple.driver.IOPlatformPluginFamily 5.5.1d27 com.apple.iokit.IONDRVSupport 2.3.6 com.apple.iokit.IOGraphicsFamily 2.3.6 com.apple.driver.AppleSMC 3.1.6d1 com.apple.driver.AppleUSBMultitouch 240.6 com.apple.iokit.IOUSBHIDDriver 650.4.4 com.apple.driver.AppleUSBMergeNub 650.4.0 com.apple.driver.AppleUSBComposite 650.4.0 com.apple.driver.CoreStorage 380 com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.0 com.apple.iokit.IOBDStorageFamily 1.7 com.apple.iokit.IODVDStorageFamily 1.7.1 com.apple.iokit.IOCDStorageFamily 1.7.1 com.apple.iokit.IOAHCISerialATAPI 2.6.0 com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0 com.apple.iokit.IOUSBUserClient 650.4.4 com.apple.iokit.IOFireWireFamily 4.5.5 com.apple.iokit.IO80211Family 600.34 com.apple.iokit.IOAHCIFamily 2.6.0 com.apple.iokit.IONetworkingFamily 3.2 com.apple.iokit.IOUSBFamily 650.4.4 com.apple.driver.NVSMU 2.2.9 com.apple.driver.AppleEFINVRAM 2.0 com.apple.driver.AppleEFIRuntime 2.0 com.apple.iokit.IOHIDFamily 2.0.0 com.apple.iokit.IOSMBusFamily 1.1 com.apple.security.sandbox 278.10 com.apple.kext.AppleMatch 1.0.0d1 com.apple.security.TMSafetyNet 7 com.apple.driver.AppleKeyStore 2 com.apple.driver.DiskImages 371.1 com.apple.iokit.IOStorageFamily 1.9 com.apple.iokit.IOReportFamily 21 com.apple.driver.AppleFDEKeyStore 28.30 com.apple.driver.AppleACPIPlatform 2.0 com.apple.iokit.IOPCIFamily 2.8 com.apple.iokit.IOACPIFamily 1.4 com.apple.kec.pthread 1 com.apple.kec.corecrypto 1.0 System Profile: Model: MacBookPro5,2, BootROM MBP52.008E.B05, 2 processors, Intel Core 2 Duo, 2.8 GHz, 8 GB, SMC 1.42f4 Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 512 MB Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x04CD, 0x46332D3130363636434C392D344742535100 Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x04CD, 0x46332D3130363636434C392D344742535100 AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22) Bluetooth: Version 4.2.0f6 12982, 3 services, 15 devices, 1 incoming serial ports Network Service: Wi-Fi, AirPort, en1 Serial ATA Device: Samsung SSD 840 Series, 120.03 GB Serial ATA Device: MATSHITADVD-R UJ-868 USB Device: Built-in iSight USB Device: BRCM2046 Hub USB Device: Bluetooth USB Host Controller USB Device: Apple Internal Keyboard / Trackpad USB Device: IR Receiver Thunderbolt Bus:

    Read the article

  • Why does my MacBook Pro have long ping times over Wi-Fi?

    - by randynov
    I have been having problems connecting with my Wi-Fi. It is weird, the ping times to the router (<30 feet away) seem to surge, often getting over 10 seconds before slowly coming back down. You can see the trend below. I'm on a MacBook Pro and have done the normal stuff (reset the PRAM and SMC, changed wireless channels, etc.). It happens across different routers, so I think it must be my laptop, but I don't know what it could be. The RSSI value hovers around -57, but I've seen the transmit rate flip between 0, 48 and 54. The signal strength is ~60% with 9% noise. Currently, there are 17 other wireless networks in range, but only one in the same channel. 1 - How can I figure out what's going on? 2 - How can I correct the situation? PING 192.168.1.1 (192.168.1.1): 56 data bytes 64 bytes from 192.168.1.1: icmp_seq=0 ttl=254 time=781.107 ms 64 bytes from 192.168.1.1: icmp_seq=1 ttl=254 time=681.551 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=254 time=610.001 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=254 time=544.915 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=254 time=547.622 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=254 time=468.914 ms 64 bytes from 192.168.1.1: icmp_seq=6 ttl=254 time=237.368 ms 64 bytes from 192.168.1.1: icmp_seq=7 ttl=254 time=229.902 ms 64 bytes from 192.168.1.1: icmp_seq=8 ttl=254 time=11754.151 ms 64 bytes from 192.168.1.1: icmp_seq=9 ttl=254 time=10753.943 ms 64 bytes from 192.168.1.1: icmp_seq=10 ttl=254 time=9754.428 ms 64 bytes from 192.168.1.1: icmp_seq=11 ttl=254 time=8754.199 ms 64 bytes from 192.168.1.1: icmp_seq=12 ttl=254 time=7754.138 ms 64 bytes from 192.168.1.1: icmp_seq=13 ttl=254 time=6754.159 ms 64 bytes from 192.168.1.1: icmp_seq=14 ttl=254 time=5753.991 ms 64 bytes from 192.168.1.1: icmp_seq=15 ttl=254 time=4754.068 ms 64 bytes from 192.168.1.1: icmp_seq=16 ttl=254 time=3753.930 ms 64 bytes from 192.168.1.1: icmp_seq=17 ttl=254 time=2753.768 ms 64 bytes from 192.168.1.1: icmp_seq=18 ttl=254 time=1753.866 ms 64 bytes from 192.168.1.1: icmp_seq=19 ttl=254 time=753.592 ms 64 bytes from 192.168.1.1: icmp_seq=20 ttl=254 time=517.315 ms 64 bytes from 192.168.1.1: icmp_seq=37 ttl=254 time=1.315 ms 64 bytes from 192.168.1.1: icmp_seq=38 ttl=254 time=1.035 ms 64 bytes from 192.168.1.1: icmp_seq=39 ttl=254 time=4.597 ms 64 bytes from 192.168.1.1: icmp_seq=21 ttl=254 time=18010.681 ms 64 bytes from 192.168.1.1: icmp_seq=22 ttl=254 time=17010.449 ms 64 bytes from 192.168.1.1: icmp_seq=23 ttl=254 time=16010.430 ms 64 bytes from 192.168.1.1: icmp_seq=24 ttl=254 time=15010.540 ms 64 bytes from 192.168.1.1: icmp_seq=25 ttl=254 time=14010.450 ms 64 bytes from 192.168.1.1: icmp_seq=26 ttl=254 time=13010.175 ms 64 bytes from 192.168.1.1: icmp_seq=27 ttl=254 time=12010.282 ms 64 bytes from 192.168.1.1: icmp_seq=28 ttl=254 time=11010.265 ms 64 bytes from 192.168.1.1: icmp_seq=29 ttl=254 time=10010.285 ms 64 bytes from 192.168.1.1: icmp_seq=30 ttl=254 time=9010.235 ms 64 bytes from 192.168.1.1: icmp_seq=31 ttl=254 time=8010.399 ms 64 bytes from 192.168.1.1: icmp_seq=32 ttl=254 time=7010.144 ms 64 bytes from 192.168.1.1: icmp_seq=33 ttl=254 time=6010.113 ms 64 bytes from 192.168.1.1: icmp_seq=34 ttl=254 time=5010.025 ms 64 bytes from 192.168.1.1: icmp_seq=35 ttl=254 time=4009.966 ms 64 bytes from 192.168.1.1: icmp_seq=36 ttl=254 time=3009.825 ms 64 bytes from 192.168.1.1: icmp_seq=40 ttl=254 time=16000.676 ms 64 bytes from 192.168.1.1: icmp_seq=41 ttl=254 time=15000.477 ms 64 bytes from 192.168.1.1: icmp_seq=42 ttl=254 time=14000.388 ms 64 bytes from 192.168.1.1: icmp_seq=43 ttl=254 time=13000.549 ms 64 bytes from 192.168.1.1: icmp_seq=44 ttl=254 time=12000.469 ms 64 bytes from 192.168.1.1: icmp_seq=45 ttl=254 time=11000.332 ms 64 bytes from 192.168.1.1: icmp_seq=46 ttl=254 time=10000.339 ms 64 bytes from 192.168.1.1: icmp_seq=47 ttl=254 time=9000.338 ms 64 bytes from 192.168.1.1: icmp_seq=48 ttl=254 time=8000.198 ms 64 bytes from 192.168.1.1: icmp_seq=49 ttl=254 time=7000.388 ms 64 bytes from 192.168.1.1: icmp_seq=50 ttl=254 time=6000.217 ms 64 bytes from 192.168.1.1: icmp_seq=51 ttl=254 time=5000.084 ms 64 bytes from 192.168.1.1: icmp_seq=52 ttl=254 time=3999.920 ms 64 bytes from 192.168.1.1: icmp_seq=53 ttl=254 time=3000.010 ms 64 bytes from 192.168.1.1: icmp_seq=54 ttl=254 time=1999.832 ms 64 bytes from 192.168.1.1: icmp_seq=55 ttl=254 time=1000.072 ms 64 bytes from 192.168.1.1: icmp_seq=58 ttl=254 time=1.125 ms 64 bytes from 192.168.1.1: icmp_seq=59 ttl=254 time=1.070 ms 64 bytes from 192.168.1.1: icmp_seq=60 ttl=254 time=2.515 ms

    Read the article

  • Why does my macbook pro have long ping times over wifi?

    - by randynov
    I have been having problems connecting with my wifi. It is weird, the ping times to the router (<30 feet away) seem to surge, often getting over 10s before slowly coming back down. You can see the trend below. I'm on a macbook pro and have done the normal stuff (reset the pram and smc, changed wireless channels, etc.). It happens across different routers, so I think it must be my laptop, but I don't know what it could be. The RSSI value hovers around -57, but I've seen the transmit rate flip between 0, 48 & 54. The signal strength is ~60% with 9% noise. Currently, there are 17 other wireless networks in range, but only one in the same channel. 1 - How can I figure out what's going on? 2 - How can I correct the situation? TIA! Randall PING 192.168.1.1 (192.168.1.1): 56 data bytes 64 bytes from 192.168.1.1: icmp_seq=0 ttl=254 time=781.107 ms 64 bytes from 192.168.1.1: icmp_seq=1 ttl=254 time=681.551 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=254 time=610.001 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=254 time=544.915 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=254 time=547.622 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=254 time=468.914 ms 64 bytes from 192.168.1.1: icmp_seq=6 ttl=254 time=237.368 ms 64 bytes from 192.168.1.1: icmp_seq=7 ttl=254 time=229.902 ms 64 bytes from 192.168.1.1: icmp_seq=8 ttl=254 time=11754.151 ms 64 bytes from 192.168.1.1: icmp_seq=9 ttl=254 time=10753.943 ms 64 bytes from 192.168.1.1: icmp_seq=10 ttl=254 time=9754.428 ms 64 bytes from 192.168.1.1: icmp_seq=11 ttl=254 time=8754.199 ms 64 bytes from 192.168.1.1: icmp_seq=12 ttl=254 time=7754.138 ms 64 bytes from 192.168.1.1: icmp_seq=13 ttl=254 time=6754.159 ms 64 bytes from 192.168.1.1: icmp_seq=14 ttl=254 time=5753.991 ms 64 bytes from 192.168.1.1: icmp_seq=15 ttl=254 time=4754.068 ms 64 bytes from 192.168.1.1: icmp_seq=16 ttl=254 time=3753.930 ms 64 bytes from 192.168.1.1: icmp_seq=17 ttl=254 time=2753.768 ms 64 bytes from 192.168.1.1: icmp_seq=18 ttl=254 time=1753.866 ms 64 bytes from 192.168.1.1: icmp_seq=19 ttl=254 time=753.592 ms 64 bytes from 192.168.1.1: icmp_seq=20 ttl=254 time=517.315 ms 64 bytes from 192.168.1.1: icmp_seq=37 ttl=254 time=1.315 ms 64 bytes from 192.168.1.1: icmp_seq=38 ttl=254 time=1.035 ms 64 bytes from 192.168.1.1: icmp_seq=39 ttl=254 time=4.597 ms 64 bytes from 192.168.1.1: icmp_seq=21 ttl=254 time=18010.681 ms 64 bytes from 192.168.1.1: icmp_seq=22 ttl=254 time=17010.449 ms 64 bytes from 192.168.1.1: icmp_seq=23 ttl=254 time=16010.430 ms 64 bytes from 192.168.1.1: icmp_seq=24 ttl=254 time=15010.540 ms 64 bytes from 192.168.1.1: icmp_seq=25 ttl=254 time=14010.450 ms 64 bytes from 192.168.1.1: icmp_seq=26 ttl=254 time=13010.175 ms 64 bytes from 192.168.1.1: icmp_seq=27 ttl=254 time=12010.282 ms 64 bytes from 192.168.1.1: icmp_seq=28 ttl=254 time=11010.265 ms 64 bytes from 192.168.1.1: icmp_seq=29 ttl=254 time=10010.285 ms 64 bytes from 192.168.1.1: icmp_seq=30 ttl=254 time=9010.235 ms 64 bytes from 192.168.1.1: icmp_seq=31 ttl=254 time=8010.399 ms 64 bytes from 192.168.1.1: icmp_seq=32 ttl=254 time=7010.144 ms 64 bytes from 192.168.1.1: icmp_seq=33 ttl=254 time=6010.113 ms 64 bytes from 192.168.1.1: icmp_seq=34 ttl=254 time=5010.025 ms 64 bytes from 192.168.1.1: icmp_seq=35 ttl=254 time=4009.966 ms 64 bytes from 192.168.1.1: icmp_seq=36 ttl=254 time=3009.825 ms 64 bytes from 192.168.1.1: icmp_seq=40 ttl=254 time=16000.676 ms 64 bytes from 192.168.1.1: icmp_seq=41 ttl=254 time=15000.477 ms 64 bytes from 192.168.1.1: icmp_seq=42 ttl=254 time=14000.388 ms 64 bytes from 192.168.1.1: icmp_seq=43 ttl=254 time=13000.549 ms 64 bytes from 192.168.1.1: icmp_seq=44 ttl=254 time=12000.469 ms 64 bytes from 192.168.1.1: icmp_seq=45 ttl=254 time=11000.332 ms 64 bytes from 192.168.1.1: icmp_seq=46 ttl=254 time=10000.339 ms 64 bytes from 192.168.1.1: icmp_seq=47 ttl=254 time=9000.338 ms 64 bytes from 192.168.1.1: icmp_seq=48 ttl=254 time=8000.198 ms 64 bytes from 192.168.1.1: icmp_seq=49 ttl=254 time=7000.388 ms 64 bytes from 192.168.1.1: icmp_seq=50 ttl=254 time=6000.217 ms 64 bytes from 192.168.1.1: icmp_seq=51 ttl=254 time=5000.084 ms 64 bytes from 192.168.1.1: icmp_seq=52 ttl=254 time=3999.920 ms 64 bytes from 192.168.1.1: icmp_seq=53 ttl=254 time=3000.010 ms 64 bytes from 192.168.1.1: icmp_seq=54 ttl=254 time=1999.832 ms 64 bytes from 192.168.1.1: icmp_seq=55 ttl=254 time=1000.072 ms 64 bytes from 192.168.1.1: icmp_seq=58 ttl=254 time=1.125 ms 64 bytes from 192.168.1.1: icmp_seq=59 ttl=254 time=1.070 ms 64 bytes from 192.168.1.1: icmp_seq=60 ttl=254 time=2.515 ms

    Read the article

  • My D-Link's Ethernet bridge downlink just got 10-30x slower?

    - by Jay Levitt
    TL;DR: I unplugged my network to move my desk, and now downloading via my DIR-655's Ethernet LAN bridge is 10-30x slower than the Ethernet switch it's plugged into. Background My network is SMC cable modem <-> Cisco firewall <-> Netgear switch <-> D-Link WiFi† | | | | SMC8014 ASA-5505 GS608v2 gigE DIR-655 rev A3 gigE †The DIR-655 is used as an access point, not a router (although what D-Link calls an access point, I'd call a bridge). The "WAN" port is unused; the Netgear connects to the built-in 4-port Ethernet LAN switch, inside the built- in router/firewall. Endpoints: MacBook Pro 17" mid-2010 iPhone 4S Fedora 12 Linux server running reasonably fast dual-Athlon X2, VelociRaptors, etc. All cables are <10 feet, mostly CAT-5e, some CAT-6, all premade. All WiFi endpoints are within three feet of the D-Link. Yesterday I unplugged and rearranged stuff, and now connecting via the D-Link - even through the wired switch, right next to the incoming network cable - is 30x slower than connecting directly to the Netgear switch, on both my MacBook and iPhone. How I'm measuring "slower" I'm mostly using http://speedtest.net, which of course only really measures broadband speeds. I've also installed http://www.speedtest.net/mini.php on my local server, but can't test the iPhone with that. Results Speedtest.net, closest server over Comcast business-class: CONFIG | PING (ms) | DOWN (Mbps) | UP (Mbps) Mac <-> Ethernet <-> Netgear | 9 | 31.6 | 6.8 Mac <-> Ethernet <-> D-Link | 8 | 4.1 | 6.0 Mac <-> WiFi <-> D-Link | 9 | 1.4 | 2.9 iPhone <-> WiFi <-> D-Link | 67 | 0.4 | 1.6 Speedtest Mini on Linux PC: CONFIG | DOWN (Mbps) | UP (Mbps) Mac <-> Ethernet <-> NetGear | 97.2 | 76.9 Mac <-> Ethernet <-> D-Link | 8.2 | 24.2 Mac <-> WiFi <-> D-Link | 1.0 | 8.6 Slow typing in SSH: Mac <-> Ethernet <-> Netgear <-> Linux PC: smooth Mac <-> Ethernet <-> D-Link <-> Linux PC: choppy Note that D-Link upload speeds are normal on broadband, slower locally (but I'd believe that's a D-Link limitation), and always faster than the downloads! Since ssh is choppy just with slow typing, I don't believe it's a throttling-type problem either; that's not a lot of bandwidth. What I've tried Swapping all "good" and "bad" cables Re-plugging "bad" cable from D-Link to Netgear and watching it be the "good" cable pulling cables away from power lines Verify that the Mac auto-detects the D-Link as gigE Try to verify the link speed of the D-Link <- Netgear connection, but the firmware doesn't report that Verify that the D-Link sees no TX/RX errors or collisions Use different Ethernet ports on both Netgear and D-Link Reset the D-Link to factory settings Upgrade the D-Link firmware from 1.21 to 1.35NA, 2010/11/12, the latest Reboot everything at least once On the Mac, disable Wi-Fi during the Ethernet tests, and unplug Ethernet during the Wi-Fi tests Using iStumbler, verify that the D-Link isn't picking overloaded Wi-Fi channels (usually just 1-5 neighbors on my and adjacent channels, average for my apt building) Verify that the only client connected to the Wi-Fi was the iPhone Verify that nothing was being chatty on my network according to the WISH log Enable and disable all sorts of D-Link settings, including forcing WAN auto-detect to gigE So. I don't mind buying a new access point—I wouldn't mind having a dual-link network—but as a guy who's been networking since gated v4 was a drastic rewrite, and who often used physical sniffers in the days before Wireshark, I'm baffled. I hate being baffled. What could I possibly have changed that would result in this? How can I measure it? All I can think of is a static zap—thick carpet, socks, HVAC—but I didn't feel one, and does that really happen anymore? Can I test if it's Ethernet vs. TCP layer slowness? I'm not familiar with modern network utilities; it's hard to Google without hitting "Q: Why is my network slow? A: Is your microwave on?" If I don't get an answer here, will someone big and powerful help me migrate it to serverfault without getting screamed back here? In the words of Inigo Montoya, "I must know." Don't get all Dread Pirate Roberts on me.

    Read the article

< Previous Page | 1 2