Search Results

Search found 10744 results on 430 pages for 'yes'.

Page 2/430 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Yes, you can benefit from both data and backup compression

  - by AaronBertrand

  Earlier today, MSSQLTips posted a backup compression tip by Thomas LaRock ( blog | twitter ). In that article, Tom states: "If you are already compressing data then you will not see much benefit from backup compression." I don't want to argue with a rock star, and I will concede that he may be right in some scenarios. Nonetheless, I tweeted that "it depends;" Thomas then asked for "an example where you have data comp and you also see a large benefit from backup comp?" My initial reaction came about...(read more)

  Read the article

• Yes, I did it - Skydiving in Mauritius

  Finally, I did it or better said we did it. Already back in November last year I saw the big billboard advertisement of Skydive Austral Mauritius near Caudan Waterfront in Port Louis and decided for myself that this is going to be the perfect birthday gift for my wife. Simply out of curiosity I would join her tandem jump with a second instructor. Due to her pregnancy of our son I had to be patient... But then finally, her birthday had arrived and on our midnight celebration session I showed her her netbook with the website preloaded. Actually, it was the "perfect" timing... Recovery from her cesarean is fine, local weather conditions are gorgious and the children were under surveillance of my mum - spending her annual holidays on the island. So, after late wake-up in the morning, we packed our stuff and off we went. According to Google Maps direction indication we had to drive for roughly 50km (only) but traffic here in Mauritius is always challenging. The dropzone is at the Zone Industrielle Mon Loisir Sugar Estate near Riviere du Rempart at the northern east coast. Anyways, we were not in a hurry and arrived there shortly after noon. The access road to the airfield are just small down-driven paths through sugar cane fields and according to our daughter "it's bumpy!". True true true... The facilities at Skydive Austral Mauritius are complete except for food. Enough space for parking, easy handling at the reception and a lot to see for the kids. There's even a big terrace with several sets of tables and chairs, small bar for soft drinks, strictly non-alcoholic. The team over there is all welcoming and warm-hearthy! Having the kids with us was no issue at all. Quite the opposite, our daugther was allowed to discover a lot of things than we adults did. Even visiting the small air plane was on the menu for her. Really great stuff! While waiting for our turn we enjoyed watching other people getting ready in the jump gear, taking off with the Cessna, and finally coming back down on the tandem parachute. Actually, the different expressions on their faces was one of the best parts while waiting. Great mental preparation as my wife was getting more anxious about her first jump... {loadposition content_adsense} First, we got some information about the procedures on the plane about how to get seated, tight up with our instructors and how to get ready for the jump off the plane as soon as we arrive the height of 10.000 ft. All well explained and easy to understand after all.Next, we met with our jumpers Chris and Lee aka "Rasta" to get dressed and ready for take-off. Those guys are really cool and relaxed for their job. From that point on, the DVD session / recording for my wife's birthday started and we really had a lot of fun... The difference between that small Cessna and a commercial flight with an Airbus or a Boeing is astronomic! The climb up to 10.000 ft took us roughly 25 minutes and we enjoyed the magnificent view over the turquoise lagunes near Poste de Flacq, Lafayette and Isle d'Ambre on the north-east coast. After flying through the clouds we sun-bathed and looked over "iced-sugar covered" Mauritius. You might have a look at the picture gallery of Skydive Mauritius for better imagination. The moment of truth, or better said, point of no return came after approximately 25 minutes. The door opens, moving into position on the side on top of the wheel and... out! Back flip and free fall! Slight turns and Wooooohooooo! through the clouds... It so amazing and breath-taking! So undescribable! You have to experience this yourself! Some seconds later the parachute opened and we glided smoothly with some turns and spins back down to the dropzone. The rest of the family could hear and see us soon and the landing was easy going. We never had any doubts or fear about our instructors. They did a great job and we are looking forward to book our next job. I might even consider to follow educational classes on skydiving and earn a license. By the way, feel free to get in touch with Skydive Austral Mauritius. Either via contact details on their website or tweeting a little bit with them. Follow the tweets of Chris and fellows on SkydiveAustral.

  Read the article

• Can I set my Optimus Nvidia card to run Unity3D with bumblebee?

  - by manuhalo

  I'd like to know whether I can run compiz on my Nvidia card to speed things up. It's a Dell XPS15 laptop but I'm mostly using it as a desktop, so battery life is not important. Apparently my Intel integrated card is able to run unity 3D, but my Nvidia GT 420M is not. Here's the output of unity_support_test, both with optirun and without it: manuhalo@Ubuntu-XPS-L501X:~$ optirun /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce GT 420M/PCI/SSE2 OpenGL version string: 4.1.0 NVIDIA 280.13 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: no GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no manuhalo@Ubuntu-XPS-L501X:~$ /usr/lib/nux/unity_support_test -p OpenGL vendor string: Tungsten Graphics, Inc OpenGL renderer string: Mesa DRI Intel(R) Ironlake Mobile OpenGL version string: 2.1 Mesa 7.11 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes Any ideas of why this is happening? Thanks in advance to anyone able to shed some light on this. What I have tried: Installed the v290 drivers from the x-stable PPA. Tried forcing Unity-3D to work by telling Unity to ignore the unity-support-test results i.e. gksudo gedit /etc/environment add the following UNITY_FORCE_START=1 to the end of the file.

  Read the article

• Rebooting yes, Shutdown no

  - by Chiotis Leonidas

  Hello everyone and thanks in advance. I am new in Ubuntu and have the 12.04 version dual boot with Windows XP. I have the following problem. The laptop can reboot using the reboot option from the menu but it cannot shut down. It starts shutting down, the dots appear but then it freezes and does not turn off. Sometimes it shuts down normally (usually just after an update) but then it loses that capability again. Some strange things, I noticed that when the dots freeze, the USB mouse loses power, BUT the usb-powered cooling pad continues to work The only Fn shortcuts that work all the time are the Volume up, down and mute, BUT sometimes when the other Fn combinations (screen-off etc) work the computer shuts down normally I searched a lot on my own, please help.

  Read the article

• Foreign key restrictions -> yes or no?

  - by This is it

  I would like to hear some”real life experience” suggestions if foreign key restrictions are good or bad thing to enforce in DB. I would kindly ask students/beginners to refrain from jumping and answering quickly and without thinking. At the beginning of my career I thought that stupidest thing you can do is disregard the referential integrity. Today, after "few" projects I'm thinking different. Quite different. What do you think: Should we enforce foreign key restrictions or not? *Please explain your answer.

  Read the article

• Using Windows 7 in iPad? Citrix Says Yes

  Citrix is the first to claim it will enable the iPad to run Windows 7. IT managers will be able to control who can access the Windows 7 desktop or even specific applications.

  Read the article

• Is Content Important For SEO - Yes Or No?

  Those of us that have been around search marketing any time at all, have heard this statement far more times than you can remember. I realize it seems repetitive, however until more businesses do a far better job at concentrating on their Web site content, it's worth repeating. Effectively composed content is essential.

  Read the article

• python command line yes/no input

  - by h3

  Is there any short way to achieve what APT does in Python ? I mean, when the package manager prompts a yes/no question followed by "[Yes/no]". The scripts accepts YES/Y/yes/y or "enter" (defaults to Yes as hinted by the capital) The only thing I find in the official doc is input/raw_input.. I know it's not that hard to emulate, but it's annoying to rewrite :|

  Read the article

• Determine if the "yes" is necessary when doing an SCP

  - by glowcoder

  I'm writing a Groovy script to do an SCP. Note that I haven't ran it yet, because the rest of it isn't finished. Now, if you're doing an scp for the first time, have to authenticate the fingerprint. Future times, you don't. My current solution is, because I get 3 tries for the password, and I really only need 1 (it's not like the script will mistype the password... if it's wrong, it's wrong!) is to pipe in "yes" as the first password attempt. This way, it will accept the fingerprint if necessary, and use the correct password as the first attempt. If it didn't need it, it puts yes as the first attempt and the correct as the second. However, I feel this is not a very robust solution, and I know if I were a customer I would not like seeing "incorrect password" in my output. Especially if it fails for another reason, it would be an incredibly annoying misnomer. What follows is the appropriate section of the script in question. I am open to any tactics that involve using scp (or accomplishing the file transfer) in a different way. I just want to get the job done. I'm even open to shell scripting, although I'm not the best at it. def command = [] command.add('scp') command.add(srcusername + '@' + srcrepo + ':' + srcpath) command.add(tarusername + '@' + tarrepo + ':' + tarpath) def process = command.execute() process.consumeOutput(out) process << "yes" << LS << tarpassword << LS process << "yes" << LS << srcpassword << LS process.waitfor() Thanks so much, glowcoder

  Read the article

• vsftpd: chroot_local_user causes GNU/TLS-error

  - by akrosikam

  Distro: Ubuntu 12.04.2 Server 32-bit Server client: vsftpd 2.3.5 (from default "main" repository) Problem: Since upgrading from Ubuntu 10.04 to Ubuntu 12.04 (nothing changed on client-side), vsftp has refused to make chroot-jails with the "chroot_local_user" directive on FTP(e/i)S-connections. Here's my vsftpd.conf: anonymous_enable=NO local_enable=YES write_enable=YES local_umask=022 dirmessage_enable=YES xferlog_enable=YES xferlog_std_format=YES ftpd_banner=How are you gentlemen. listen=YES pam_service_name=vsftpd userlist_enable=YES userlist_deny=NO tcp_wrappers=YES connect_from_port_20=YES ftp_data_port=20 listen_port=21 pasv_enable=YES pasv_promiscuous=NO pasv_min_port=4242 pasv_max_port=4252 pasv_addr_resolve=YES pasv_address=your.domain.com ssl_enable=YES allow_anon_ssl=NO force_local_logins_ssl=YES force_local_data_ssl=YES ssl_tlsv1=YES ssl_sslv2=NO ssl_sslv3=NO rsa_cert_file=/home/maw/ssl_ftp_test/vsftpd.pem rsa_private_key_file=/home/maw/ssl_ftp_test/vsftpd.pem debug_ssl=YES log_ftp_protocol=YES ssl_ciphers=HIGH chroot_local_user=NO How to reproduce: Have a working SSL/TLS-secured vsftpd-configuration (I suggest similar to the one above) ready. Try to connect with an FTP user client and upload some files. With my setup, the above listed config works well at this point. Edit /etc/vsftpd.conf and set chroot_local_user= to YES. Make sure that chroot_list_enable= and/or chroot_list_file= are not set. Comment them out if they are. Save and exit. Run sudo restart vsftpd (or sudo service vsftpd restart if you like) in a terminal. Try to connect with an FTP user client. You should see a message more or less like this: GnuTLS error -15: An unexpected TLS packet was received. This is an issue for me, as I do not want FTP-sessions to be able to list files outside the user's home folder. I have checked with several client-side apps, and I get the same results with every one of them. Filezilla is not so good regarding cipher methods nowadays, but as I am able to make an FTP(e)s-connection over TLS (as long as chroot'ing is disabled and ssl_ciphers is set to HIGH) I have a feeling ciphers are not the issue this time, and that I won't find the answer by tweaking configs on the client side. My vsftpd.log stays empty, even though debug_ssl and log_ftp_protocol are enabled, so no info there either.

  Read the article

• How to make Unity 3D work with Bumblebee using the Intel chipset

  - by EboMike

  I have a Sony VAIO S laptop with the dreaded Optimus and finally managed to get Bumblebee to work fully on Ubuntu 12.04 so that I can utilize both the hardware acceleration of the Intel chipset as well as the Nvidia one via optirun and/or bumble-app-settings. However, the desktop effects don't work. But they should, I vaguely remember that they worked for a while before I had Bumblebee installed. This is what I get with the support test: :~$ /usr/lib/nux/unity_support_test -p Xlib: extension "NV-GLX" missing on display ":0". OpenGL vendor string: Tungsten Graphics, Inc OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile OpenGL version string: 1.4 (2.1 Mesa 8.0.2) Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: no GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no First of all, I kind of doubt that the chipset doesn't support VBOs (essentially a standard feature in GL). Neither Xorg.0.log nor Xorg.8.log show any particular errors. As for the Nvidia drivers: In order to get them to work, I had to install the 304.22 drivers (older ones wouldn't work). They clobbered libglx.so, so I reinstated the xserver-xorg-core libglx.so in its original place, moved Nvidia's libglx.so to an nvidia-specific folder and specified that folder in the bumblebee.config. That seems to work and shouldn't cause the problem I see here. For fun, I tried to use the Nvidia chipset for Unity, but that didn't fly either: ~$ optirun /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce GT 640M LE/PCIe/SSE2 OpenGL version string: 4.2.0 NVIDIA 304.22 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: no GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no

  Read the article

• vsftpd 500 OOPS: priv_sock_get_int

  - by user1613878

  I have a problem with vsftpd that replies "500 OOPS: priv_sock_get_int" when i do command "ls". following is a snip of ftp client console running on osx. And I'm using test account that has home directory on the ftp server, not virtual account. Connected to 192.0.0.20. 220 satellite Name (192.0.0.20:john): test_account 331 Please specify the password. Password: 230 Login successful. Remote system type is UNIX. Using binary mode to transfer files. ftp> ls 500 OOPS: priv_sock_get_int 421 Service not available, remote server has closed connection. and my vsftpd.conf local_enable=YES write_enable=YES #local_umask=022 local_umask=002 #anon_upload_enable=YES #anon_mkdir_write_enable=YES #dirmessage_enable=YES #xferlog_enable=YES connect_from_port_20=YES #chown_uploads=YES #chown_username=whoever #xferlog_file=/var/log/vsftpd.log #xferlog_std_format=YES #idle_session_timeout=600 #data_connection_timeout=120 #nopriv_user=test #async_abor_enable=YES #ascii_upload_enable=YES #ascii_download_enable=YES ftpd_banner=welcome #deny_email_enable=YES #banned_email_file=/etc/vsftpd.banned_emails #chroot_local_user=YES #chroot_list_enable=YES #chroot_list_file=/etc/vsftpd.chroot_list #ls_recurse_enable=YES listen=YES #listen_ipv6=YES #ssl_enable=NO pasv_enable=YES pasv_max_port=12500 pasv_min_port=12000 port_enable=YES pasv_address=192.0.0.20 pasv_promiscuous=YES port_promiscuous=YES file_open_mode=0666

  Read the article

• vsftpd: ECONNREFUSED with "allow_writeable_chroot=YES"

  - by heinob

  When setting up vsftpd I am trapped. When I leave the ftpuser's home directory without write permission I can login and all is fine despite the fact, that I cannot write (of course). When I add write permission I get something like cannot change to directory with write permissions if user is chrooted Then I added allow_writeable_chroot=YES to vsftpd.conf. But now I get ECONNREFUSED - Connection refused by server I am lost. What am I doing wrong?

  Read the article

• ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using Password:YES) [duplicate]

  - by sivashanmugam

  This question already has an answer here: MySQL command appends '@localhost' to username 1 answer Mysql - Access denied for user 'root'@'x.x.x.x' [duplicate] 7 answers root@test-2:/usr/local# mysql -u root -H 192.168.x.xxx -p Enter password: ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: YES)

  Read the article

• Azure eBook Update #1 &ndash; 16 authors so far!

  - by Eric Nelson

  I just wanted to share with folks where we are up to with the Windows Azure eBook (Check out the original post for full details) I have had lots of great submissions from folks with some awesome stuff to share on Azure. Currently we have 16 authors and 25 proposed articles. There is still a couple of days left to submit your proposal if you would like to get involved (see the original post ) and some topic suggestions below for which we don’t currently have authors. It is official – I’m excited! :-) Article Area Accepted Wikipedia Explorer: A case study how we did it and why. CaseSetudy Optional Patterns for the Windows Azure Platform (picking up 1 or 2 patterns that seem to be evolving) Architecture Optional Azure and cost-oriented architecture. Architecture Yes Code walkthrough of a comprehensive application submitted to newCloudApp contest CaseSetudy Yes Principles of highly scalable apps on Azure Compute Optional Auto-Scaling Azure Compute Yes Implementing a distributed cache using memcached with worker roles Interop Yes Building a content-based router service to direct requests to internal HTTP endpoints Compute Optional How to debug an Azure app by with a custom TraceListener & the AppFabric Service Bus AppFabric Yes How to host Java apps in Azure Interop Yes Bing Maps Tile Servers using Azure Blog Storage Interop Yes Tricks for storing time and date fields in Table Storage Storage Yes Service Runtime in Windows Azure Compute Yes Azure Drive Storage Optional Queries in Azure Table Storage Optional Getting RubyOnRails running on Azure Interop Yes Consuming Azure services within Windows Phone Interop Yes De-risking Your First Azure Project Architecture Yes Designing for failure Architecture Optional Connecting to SQL Azure In x Minutes SQLAzure Yes Using Azure Table Service as a NoSQL store via the REST API Storage Yes Azure Table Service REST API Storage Optional Threading, Scalability and Reliability in the Cloud Compute Yes Azure Diagnostics Compute Yes 5 steps to getting started with Windows Azure Introduction Yes The best tools for working with Windows Azure Tools Author Needed Understanding how SQL Azure works SQLAzure Author Needed Getting started with AppFabric Control Services AppFabric Author Needed Using the Microsoft Sync Framework with SQL Azure SQLAzure Author Needed Dallas - just a TV show or something more? Dallas Author Needed Comparing Azure to other cloud offerings Interop Author Needed Hybrid solutions using Azure and on-premise Interop Author Needed

  Read the article

• How to set editing is yes for a particular section in iPhone

  - by Madan Mohan

  Hi guys, I have declared UITableView in .h file.I have 5 section in the table view, now I need to set the tableview.editing= yes only for section 4. how can I dispaly the + button beside section 4 and all other sections must in editing = NO. myTableView = [[UITableView alloc]initWithFrame:CGRectMake(0,0,320,415) style:UITableViewStyleGrouped]; myTableView.delegate = self; myTableView.dataSource=self; [myTableView setSectionFooterHeight:0]; [myTableView setSectionHeaderHeight:15]; [myTableView setSeparatorColor:[UIColor lightGrayColor]]; myTableView.backgroundColor = [UIColor colorWithRed:0.85546875 green:0.8828125 blue:0.92578125 alpha:1]; [myView addSubview: myTableView]; I tried like this it is not working. - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { if(section==0) { myTableView.editing = NO; myTableView.allowsSelectionDuringEditing = NO; return 3; } else if(section ==1) { myTableView.editing = NO; myTableView.allowsSelectionDuringEditing = NO; return 2; } else if(section==4) { myTableView.editing = YES; myTableView.allowsSelectionDuringEditing = YES; if(isEdit == YES) { if([editObject.contactList count]0) { return [editObject.contactList count]+1; } else { return 1; } } else if(isEdit == NO) { if([addContactList count]0) { return [addContactList count]+1; } else { return 1; } } } else if(section==2) { myTableView.editing = NO; myTableView.allowsSelectionDuringEditing = NO; return 1; } else if(section==3) { myTableView.editing = NO; myTableView.allowsSelectionDuringEditing = NO; return 1; } return 0; } I am getting + button to the 4th section but all other section are moved to the right side. please help me Thank You, Madan Avulagadda.

  Read the article

• Add xml-stylesheet and get standalone = yes.

  - by tumba25

  The code at the bottom is what I have. I removed the creation of all tags. At the top in the xml file I get.<?xml version="1.0" encoding="UTF-8" standalone="no"?> Note that standalone is no, even thou I have it set to yes. The first question: How do I get standalone = yes? I would like to add <?xml-stylesheet type="text/xsl" href="my.stylesheet.xsl"?> at line two in the xml file. Second question: How do I do that? Some useful links? Anything? DocumentBuilderFactory dbfac = DocumentBuilderFactory.newInstance(); DocumentBuilder docBuilder = dbfac.newDocumentBuilder(); Document doc = docBuilder.newDocument(); <cut> TransformerFactory transfac = TransformerFactory.newInstance(); transfac.setAttribute("indent-number", new Integer(2)); Transformer trans = transfac.newTransformer(); trans.setOutputProperty(OutputKeys.OMIT_XML_DECLARATION, "no"); trans.setOutputProperty(OutputKeys.STANDALONE, "yes"); trans.setOutputProperty(OutputKeys.INDENT, "yes"); trans.setOutputProperty(OutputKeys.CDATA_SECTION_ELEMENTS, "name"); FileOutputStream fout = new FileOutputStream(filepath); BufferedOutputStream bout= new BufferedOutputStream(fout); trans.transform(new DOMSource(doc), new StreamResult(new OutputStreamWriter(bout, "utf-8")));

  Read the article

• Problems installing clamcour

  - by user10778

  Hello People, when i try to install clamcour from terminal, it gives me this error, somebody can help me? calmcourdir# ./configure checking for libraries containing socket functions... -lc checking for socket... yes checking for bind... yes checking for listen... yes checking for accept... yes checking for shutdown... yes checking for socklen_t... yes checking for struct sockaddr_un.sun_len... no System log functions checking syslog.h usability... yes checking syslog.h presence... yes checking for syslog.h... yes checking for openlog... yes checking for syslog... yes checking for closelog... yes Time functions checking whether time.h and sys/time.h may both be included... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for localtime_r... yes checking for strftime... yes checking for unistd.h... (cached) yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking for sysconf... yes BZip2 support checking bzlib.h usability... no checking bzlib.h presence... no checking for bzlib.h... no checking for BZ2_bzWriteOpen in -lbz2... no GZip support checking zlib.h usability... no checking zlib.h presence... no checking for zlib.h... no checking for gzopen in -lz... no LibClamAV support checking for /usr/bin/clamav-config... no checking for /usr/local/bin/courier-config... no checking for /usr/clamav/bin/clamav-config... no checking for /usr/local/clamav/bin/clamav-config... no ./configure: line 25234: : command not found configure: error: Cannot find clamav-config

  Read the article

• Problems building clamcour

  - by user10778

  Hello People, when i try to install clamcour from terminal, it gives me this error, somebody can help me? calmcourdir# ./configure checking for libraries containing socket functions... -lc checking for socket... yes checking for bind... yes checking for listen... yes checking for accept... yes checking for shutdown... yes checking for socklen_t... yes checking for struct sockaddr_un.sun_len... no System log functions checking syslog.h usability... yes checking syslog.h presence... yes checking for syslog.h... yes checking for openlog... yes checking for syslog... yes checking for closelog... yes Time functions checking whether time.h and sys/time.h may both be included... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for localtime_r... yes checking for strftime... yes checking for unistd.h... (cached) yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking for sysconf... yes BZip2 support checking bzlib.h usability... no checking bzlib.h presence... no checking for bzlib.h... no checking for BZ2_bzWriteOpen in -lbz2... no GZip support checking zlib.h usability... no checking zlib.h presence... no checking for zlib.h... no checking for gzopen in -lz... no LibClamAV support checking for /usr/bin/clamav-config... no checking for /usr/local/bin/courier-config... no checking for /usr/clamav/bin/clamav-config... no checking for /usr/local/clamav/bin/clamav-config... no ./configure: line 25234: : command not found configure: error: Cannot find clamav-config

  Read the article

• LSI 9285-8e and Supermicro SC837E26-RJBOD1 duplicate enclosure ID and slot numbers

  - by Andy Shinn

  I am working with 2 x Supermicro SC837E26-RJBOD1 chassis connected to a single LSI 9285-8e card in a Supermicro 1U host. There are 28 drives in each chassis for a total of 56 drives in 28 RAID1 mirrors. The problem I am running in to is that there are duplicate slots for the 2 chassis (the slots list twice and only go from 0 to 27). All the drives also show the same enclosure ID (ID 36). However, MegaCLI -encinfo lists the 2 enclosures correctly (ID 36 and ID 65). My question is, why would this happen? Is there an option I am missing to use 2 enclosures effectively? This is blocking me rebuilding a drive that failed in slot 11 since I can only specify enclosure and slot as parameters to replace a drive. When I do this, it picks the wrong slot 11 (device ID 46 instead of device ID 19). Adapter #1 is the LSI 9285-8e, adapter #0 (which I removed due to space limitations) is the onboard LSI. Adapter information: Adapter #1 ============================================================================== Versions ================ Product Name : LSI MegaRAID SAS 9285-8e Serial No : SV12704804 FW Package Build: 23.1.1-0004 Mfg. Data ================ Mfg. Date : 06/30/11 Rework Date : 00/00/00 Revision No : 00A Battery FRU : N/A Image Versions in Flash: ================ BIOS Version : 5.25.00_4.11.05.00_0x05040000 WebBIOS Version : 6.1-20-e_20-Rel Preboot CLI Version: 05.01-04:#%00001 FW Version : 3.140.15-1320 NVDATA Version : 2.1106.03-0051 Boot Block Version : 2.04.00.00-0001 BOOT Version : 06.253.57.219 Pending Images in Flash ================ None PCI Info ================ Vendor Id : 1000 Device Id : 005b SubVendorId : 1000 SubDeviceId : 9285 Host Interface : PCIE ChipRevision : B0 Number of Frontend Port: 0 Device Interface : PCIE Number of Backend Port: 8 Port : Address 0 5003048000ee8e7f 1 5003048000ee8a7f 2 0000000000000000 3 0000000000000000 4 0000000000000000 5 0000000000000000 6 0000000000000000 7 0000000000000000 HW Configuration ================ SAS Address : 500605b0038f9210 BBU : Present Alarm : Present NVRAM : Present Serial Debugger : Present Memory : Present Flash : Present Memory Size : 1024MB TPM : Absent On board Expander: Absent Upgrade Key : Absent Temperature sensor for ROC : Present Temperature sensor for controller : Absent ROC temperature : 70 degree Celcius Settings ================ Current Time : 18:24:36 3/13, 2012 Predictive Fail Poll Interval : 300sec Interrupt Throttle Active Count : 16 Interrupt Throttle Completion : 50us Rebuild Rate : 30% PR Rate : 30% BGI Rate : 30% Check Consistency Rate : 30% Reconstruction Rate : 30% Cache Flush Interval : 4s Max Drives to Spinup at One Time : 2 Delay Among Spinup Groups : 12s Physical Drive Coercion Mode : Disabled Cluster Mode : Disabled Alarm : Enabled Auto Rebuild : Enabled Battery Warning : Enabled Ecc Bucket Size : 15 Ecc Bucket Leak Rate : 1440 Minutes Restore HotSpare on Insertion : Disabled Expose Enclosure Devices : Enabled Maintain PD Fail History : Enabled Host Request Reordering : Enabled Auto Detect BackPlane Enabled : SGPIO/i2c SEP Load Balance Mode : Auto Use FDE Only : No Security Key Assigned : No Security Key Failed : No Security Key Not Backedup : No Default LD PowerSave Policy : Controller Defined Maximum number of direct attached drives to spin up in 1 min : 10 Any Offline VD Cache Preserved : No Allow Boot with Preserved Cache : No Disable Online Controller Reset : No PFK in NVRAM : No Use disk activity for locate : No Capabilities ================ RAID Level Supported : RAID0, RAID1, RAID5, RAID6, RAID00, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, SRL 3 supported, PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span Supported Drives : SAS, SATA Allowed Mixing: Mix in Enclosure Allowed Mix of SAS/SATA of HDD type in VD Allowed Status ================ ECC Bucket Count : 0 Limitations ================ Max Arms Per VD : 32 Max Spans Per VD : 8 Max Arrays : 128 Max Number of VDs : 64 Max Parallel Commands : 1008 Max SGE Count : 60 Max Data Transfer Size : 8192 sectors Max Strips PerIO : 42 Max LD per array : 16 Min Strip Size : 8 KB Max Strip Size : 1.0 MB Max Configurable CacheCade Size: 0 GB Current Size of CacheCade : 0 GB Current Size of FW Cache : 887 MB Device Present ================ Virtual Drives : 28 Degraded : 0 Offline : 0 Physical Devices : 59 Disks : 56 Critical Disks : 0 Failed Disks : 0 Supported Adapter Operations ================ Rebuild Rate : Yes CC Rate : Yes BGI Rate : Yes Reconstruct Rate : Yes Patrol Read Rate : Yes Alarm Control : Yes Cluster Support : No BBU : No Spanning : Yes Dedicated Hot Spare : Yes Revertible Hot Spares : Yes Foreign Config Import : Yes Self Diagnostic : Yes Allow Mixed Redundancy on Array : No Global Hot Spares : Yes Deny SCSI Passthrough : No Deny SMP Passthrough : No Deny STP Passthrough : No Support Security : No Snapshot Enabled : No Support the OCE without adding drives : Yes Support PFK : Yes Support PI : No Support Boot Time PFK Change : Yes Disable Online PFK Change : No PFK TrailTime Remaining : 0 days 0 hours Support Shield State : Yes Block SSD Write Disk Cache Change: Yes Supported VD Operations ================ Read Policy : Yes Write Policy : Yes IO Policy : Yes Access Policy : Yes Disk Cache Policy : Yes Reconstruction : Yes Deny Locate : No Deny CC : No Allow Ctrl Encryption: No Enable LDBBM : No Support Breakmirror : No Power Savings : Yes Supported PD Operations ================ Force Online : Yes Force Offline : Yes Force Rebuild : Yes Deny Force Failed : No Deny Force Good/Bad : No Deny Missing Replace : No Deny Clear : No Deny Locate : No Support Temperature : Yes Disable Copyback : No Enable JBOD : No Enable Copyback on SMART : No Enable Copyback to SSD on SMART Error : Yes Enable SSD Patrol Read : No PR Correct Unconfigured Areas : Yes Enable Spin Down of UnConfigured Drives : Yes Disable Spin Down of hot spares : No Spin Down time : 30 T10 Power State : Yes Error Counters ================ Memory Correctable Errors : 0 Memory Uncorrectable Errors : 0 Cluster Information ================ Cluster Permitted : No Cluster Active : No Default Settings ================ Phy Polarity : 0 Phy PolaritySplit : 0 Background Rate : 30 Strip Size : 64kB Flush Time : 4 seconds Write Policy : WB Read Policy : Adaptive Cache When BBU Bad : Disabled Cached IO : No SMART Mode : Mode 6 Alarm Disable : Yes Coercion Mode : None ZCR Config : Unknown Dirty LED Shows Drive Activity : No BIOS Continue on Error : No Spin Down Mode : None Allowed Device Type : SAS/SATA Mix Allow Mix in Enclosure : Yes Allow HDD SAS/SATA Mix in VD : Yes Allow SSD SAS/SATA Mix in VD : No Allow HDD/SSD Mix in VD : No Allow SATA in Cluster : No Max Chained Enclosures : 16 Disable Ctrl-R : Yes Enable Web BIOS : Yes Direct PD Mapping : No BIOS Enumerate VDs : Yes Restore Hot Spare on Insertion : No Expose Enclosure Devices : Yes Maintain PD Fail History : Yes Disable Puncturing : No Zero Based Enclosure Enumeration : No PreBoot CLI Enabled : Yes LED Show Drive Activity : Yes Cluster Disable : Yes SAS Disable : No Auto Detect BackPlane Enable : SGPIO/i2c SEP Use FDE Only : No Enable Led Header : No Delay during POST : 0 EnableCrashDump : No Disable Online Controller Reset : No EnableLDBBM : No Un-Certified Hard Disk Drives : Allow Treat Single span R1E as R10 : No Max LD per array : 16 Power Saving option : Don't Auto spin down Configured Drives Max power savings option is not allowed for LDs. Only T10 power conditions are to be used. Default spin down time in minutes: 30 Enable JBOD : No TTY Log In Flash : No Auto Enhanced Import : No BreakMirror RAID Support : No Disable Join Mirror : No Enable Shield State : Yes Time taken to detect CME : 60s Exit Code: 0x00 Enclosure information: # /opt/MegaRAID/MegaCli/MegaCli64 -encinfo -a1 Number of enclosures on adapter 1 -- 3 Enclosure 0: Device ID : 36 Number of Slots : 28 Number of Power Supplies : 2 Number of Fans : 3 Number of Temperature Sensors : 1 Number of Alarms : 1 Number of SIM Modules : 0 Number of Physical Drives : 28 Status : Normal Position : 1 Connector Name : Port B Enclosure type : SES VendorId is LSI CORP and Product Id is SAS2X36 VendorID and Product ID didnt match FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : 65 Inquiry data : Vendor Identification : LSI CORP Product Identification : SAS2X36 Product Revision Level : 0718 Vendor Specific : x36-55.7.24.1 Number of Voltage Sensors :2 Voltage Sensor :0 Voltage Sensor Status :OK Voltage Value :5020 milli volts Voltage Sensor :1 Voltage Sensor Status :OK Voltage Value :11820 milli volts Number of Power Supplies : 2 Power Supply : 0 Power Supply Status : OK Power Supply : 1 Power Supply Status : OK Number of Fans : 3 Fan : 0 Fan Speed :Low Speed Fan Status : OK Fan : 1 Fan Speed :Low Speed Fan Status : OK Fan : 2 Fan Speed :Low Speed Fan Status : OK Number of Temperature Sensors : 1 Temp Sensor : 0 Temperature : 48 Temperature Sensor Status : OK Number of Chassis : 1 Chassis : 0 Chassis Status : OK Enclosure 1: Device ID : 65 Number of Slots : 28 Number of Power Supplies : 2 Number of Fans : 3 Number of Temperature Sensors : 1 Number of Alarms : 1 Number of SIM Modules : 0 Number of Physical Drives : 28 Status : Normal Position : 1 Connector Name : Port A Enclosure type : SES VendorId is LSI CORP and Product Id is SAS2X36 VendorID and Product ID didnt match FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : 36 Inquiry data : Vendor Identification : LSI CORP Product Identification : SAS2X36 Product Revision Level : 0718 Vendor Specific : x36-55.7.24.1 Number of Voltage Sensors :2 Voltage Sensor :0 Voltage Sensor Status :OK Voltage Value :5020 milli volts Voltage Sensor :1 Voltage Sensor Status :OK Voltage Value :11760 milli volts Number of Power Supplies : 2 Power Supply : 0 Power Supply Status : OK Power Supply : 1 Power Supply Status : OK Number of Fans : 3 Fan : 0 Fan Speed :Low Speed Fan Status : OK Fan : 1 Fan Speed :Low Speed Fan Status : OK Fan : 2 Fan Speed :Low Speed Fan Status : OK Number of Temperature Sensors : 1 Temp Sensor : 0 Temperature : 47 Temperature Sensor Status : OK Number of Chassis : 1 Chassis : 0 Chassis Status : OK Enclosure 2: Device ID : 252 Number of Slots : 8 Number of Power Supplies : 0 Number of Fans : 0 Number of Temperature Sensors : 0 Number of Alarms : 0 Number of SIM Modules : 1 Number of Physical Drives : 0 Status : Normal Position : 1 Connector Name : Unavailable Enclosure type : SGPIO Failed in first Inquiry commnad FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : Unavailable Inquiry data : Vendor Identification : LSI Product Identification : SGPIO Product Revision Level : N/A Vendor Specific : Exit Code: 0x00 Now, notice that each slot 11 device shows an enclosure ID of 36, I think this is where the discrepancy happens. One should be 36. But the other should be on enclosure 65. Drives in slot 11: Enclosure Device ID: 36 Slot Number: 11 Drive's postion: DiskGroup: 5, Span: 0, Arm: 1 Enclosure position: 0 Device Id: 48 WWN: Sequence Number: 11 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 2.728 TB [0x15d50a3b0 Sectors] Non Coerced Size: 2.728 TB [0x15d40a3b0 Sectors] Coerced Size: 2.728 TB [0x15d400000 Sectors] Firmware state: Online, Spun Up Is Commissioned Spare : YES Device Firmware Level: A5C0 Shield Counter: 0 Successful diagnostics completion on : N/A SAS Address(0): 0x5003048000ee8a53 Connected Port Number: 1(path0) Inquiry Data: MJ1311YNG6YYXAHitachi HDS5C3030ALA630 MEAOA5C0 FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive Temperature :30C (86.00 F) PI Eligibility: No Drive is formatted for PI information: No PI: No PI Drive's write cache : Disabled Drive's NCQ setting : Enabled Port-0 : Port status: Active Port's Linkspeed: 6.0Gb/s Drive has flagged a S.M.A.R.T alert : No Enclosure Device ID: 36 Slot Number: 11 Drive's postion: DiskGroup: 19, Span: 0, Arm: 1 Enclosure position: 0 Device Id: 19 WWN: Sequence Number: 4 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 2.728 TB [0x15d50a3b0 Sectors] Non Coerced Size: 2.728 TB [0x15d40a3b0 Sectors] Coerced Size: 2.728 TB [0x15d400000 Sectors] Firmware state: Online, Spun Up Is Commissioned Spare : NO Device Firmware Level: A580 Shield Counter: 0 Successful diagnostics completion on : N/A SAS Address(0): 0x5003048000ee8e53 Connected Port Number: 0(path0) Inquiry Data: MJ1313YNG1VA5CHitachi HDS5C3030ALA630 MEAOA580 FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive Temperature :30C (86.00 F) PI Eligibility: No Drive is formatted for PI information: No PI: No PI Drive's write cache : Disabled Drive's NCQ setting : Enabled Port-0 : Port status: Active Port's Linkspeed: 6.0Gb/s Drive has flagged a S.M.A.R.T alert : No Update 06/28/12: I finally have some new information about (what we think) the root cause of this problem so I thought I would share. After getting in contact with a very knowledgeable Supermicro tech, they provided us with a tool called Xflash (doesn't appear to be readily available on their FTP). When we gathered some information using this utility, my colleague found something very strange: root@mogile2 test]# ./xflash.dat -i get avail Initializing Interface. Expander: SAS2X36 (SAS2x36) 1) SAS2X36 (SAS2x36) (50030480:00EE917F) (0.0.0.0) 2) SAS2X36 (SAS2x36) (50030480:00E9D67F) (0.0.0.0) 3) SAS2X36 (SAS2x36) (50030480:0112D97F) (0.0.0.0) This lists the connected enclosures. You see the 3 connected (we have since added a 3rd and a 4th which is not yet showing up) with their respective SAS address / WWN (50030480:00EE917F). Now we can use this address to get information on the individual enclosures: [root@mogile2 test]# ./xflash.dat -i 5003048000EE917F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:00EE917F Enclosure Logical Id: 50030480:0000007F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 [root@mogile2 test]# ./xflash.dat -i 5003048000E9D67F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:00E9D67F Enclosure Logical Id: 50030480:0000007F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 [root@mogile2 test]# ./xflash.dat -i 500304800112D97F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:0112D97F Enclosure Logical Id: 50030480:0112D97F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 Did you catch it? The first 2 enclosures logical ID is partially masked out where the 3rd one (which has a correct unique enclosure ID) is not. We pointed this out to Supermicro and were able to confirm that this address is supposed to be set during manufacturing and there was a problem with a certain batch of these enclosures where the logical ID was not set. We believe that the RAID controller is determining the ID based on the logical ID and since our first 2 enclosures have the same logical ID, they get the same enclosure ID. We also confirmed that 0000007F is the default which comes from LSI as an ID. The next pointer that helps confirm this could be a manufacturing problem with a run of JBODs is the fact that all 6 of the enclosures that have this problem begin with 00E. I believe that between 00E8 and 00EE Supermicro forgot to program the logical IDs correctly and neglected to recall or fix the problem post production. Fortunately for us, there is a tool to manage the WWN and logical ID of the devices from Supermicro: ftp://ftp.supermicro.com/utility/ExpanderXtools_Lite/. Our next step is to schedule a shutdown of these JBODs (after data migration) and reprogram the logical ID and see if it solves the problem. Update 06/28/12 #2: I just discovered this FAQ at Supermicro while Google searching for "lsi 0000007f": http://www.supermicro.com/support/faqs/faq.cfm?faq=11805. I still don't understand why, in the last several times we contacted Supermicro, they would have never directed us to this article :\

  Read the article

• setContentOffset only works if animated is set to YES

  - by Sheehan Alam

  I have a UITableView which I would like to be displayed 100px down. For some reason this only works when animated is set to YES. Why is this? - (void)viewWillAppear:(BOOL)animated { [super viewWillAppear:animated]; /*[self.tableView scrollToRowAtIndexPath:[NSIndexPath indexPathForRow:1 inSection:0] atScrollPosition:UITableViewScrollPositionNone animated:NO];*/ /*[self.tableView scrollToRowAtIndexPath:[NSIndexPath indexPathWithIndex:1] atScrollPosition:UITableViewScrollPositionNone animated:NO];*/ [self.tableView setContentOffset:CGPointMake(0,100) animated:YES]; }

  Read the article

• [picker dismissModalViewControllerAnimated:YES]; not working

  - by shishir.bobby

  I am using - (void)imagePickerController:(UIImagePickerController *)picker didFinishPickingMediaWithInfo:(NSDictionary *)info { } for imagepicker and using [picker dismissModalViewControllerAnimated:YES]; in iPad to dismiss the picker. also i tried using - (void)imagePickerControllerDidCancel:(UIImagePickerController *)picker;{ [picker dismissModalViewControllerAnimated:YES]; } to dismiss the picker once it done the work. BUt its not dimissing it. when i tap anywhere in the screen, than only it gets dismiss. What i am doing wrong to dismiss the imagepicker? Many thnkas

  Read the article

• ctrl+click or shift+click not always firing the onclick event

  - by Erik

  Hi, I recently discovered that different browsers handle the onclick event differently when the control of shift key is pressed. Same thing for following links with the middle mouse button. <a href="http://www.example.com/" onclick="alert('onclick');">go to example.com</a> Onclick browser support table Mouse Keyboard Chrome Firefox Safari Opera IE5.5 IE6 IE7 IE8 IE9 Left None yes yes yes yes yes yes yes yes yes Left Ctrl yes yes yes yes ? yes no no ? Left Shift yes yes yes yes ? yes yes yes ? Middle None yes no yes no ? N/A no no ? Can someone please fill in the question marks for me? Also; I'm wondering if the behaviour differs for each version of Chrome, Firefox, Safari and Opera. Finding a logical pattern in this behaviour would be even nicer, but I don't think there is :). Thanks a lot.

  Read the article

• SSH to an ubuntu machine using avahi

  - by tensaiji

  I have an ubuntu box that I connect to using avahi. Connecting to that box works fine for all services (I regularly use AFP, SSH and SMB on it) but I've noticed that whenever I connect to it from a mac using SSH (and using the ".local" dns name provided by avahi - eg. "ssh .local") SSH tries to connect using ipv6, which for some reason times out (after two minutes) then it tries ipv4 which connects immediately. I'd like to avoid this timeout, as it's really annoying for me and other users - if SSH tried ipv4 first or if ssh over ipv6 worked then that would solve the problem. But so far I've been unable to get either to work (the best I've managed is to specify the "-4" option to SSH to stop it from trying ipv6 at all). I'm using Ubuntu 10.04. Any solution has to be on the server (not the client) as there are multiple clients connecting. A possible complication might be that my LAN is set up to allow link-local ipv6 addresses only, but I have other servers (using Mac OS) that I can SSH into using ipv6) I suspect that the problem could be solved by either preventing avahi from broadcasting the ipv6 address, or by enabling ssh over ipv6, but so far as I can tell avahi is already configured not to broadcast the ipv6 address and sshd is configured to allow ipv6 connections! Here's my /etc/avahi/avahi-daemon.conf (I don't think I've changed anything from the ubuntu defaults) [server] #host-name=foo #domain-name=local #browse-domains=0pointer.de, zeroconf.org use-ipv4=yes use-ipv6=no #allow-interfaces=eth0 #deny-interfaces=eth1 #check-response-ttl=no #use-iff-running=no #enable-dbus=yes #disallow-other-stacks=no #allow-point-to-point=no [wide-area] enable-wide-area=yes [publish] #disable-publishing=no #disable-user-service-publishing=no #add-service-cookie=no #publish-addresses=yes #publish-hinfo=yes #publish-workstation=yes #publish-domain=yes #publish-dns-servers=192.168.50.1, 192.168.50.2 #publish-resolv-conf-dns-servers=yes #publish-aaaa-on-ipv4=yes #publish-a-on-ipv6=no [reflector] #enable-reflector=no #reflect-ipv=no [rlimits] #rlimit-as= rlimit-core=0 rlimit-data=4194304 rlimit-fsize=0 rlimit-nofile=300 rlimit-stack=4194304 rlimit-nproc=3 and here's my sshd_config (mainly updated to only allow pub/private keys): # What ports, IPs and protocols we listen for Port 22 # Use these options to restrict which interfaces/protocols sshd will bind to #ListenAddress :: #ListenAddress 0.0.0.0 Protocol 2 # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key #Privilege Separation is turned on for security UsePrivilegeSeparation yes # Lifetime and size of ephemeral version 1 server key KeyRegenerationInterval 3600 ServerKeyBits 768 # Logging SyslogFacility AUTH LogLevel INFO # Authentication: LoginGraceTime 180 PermitRootLogin no StrictModes yes RSAAuthentication yes PubkeyAuthentication yes #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # For this to work you will also need host keys in /etc/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) PermitEmptyPasswords no # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) ChallengeResponseAuthentication no # Change to no to disable tunnelled clear text passwords PasswordAuthentication no AllowGroups sshusers # Kerberos options #KerberosAuthentication no #KerberosGetAFSToken no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes X11Forwarding yes X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes #UseLogin no MaxStartups 10:30:60 #Banner /etc/issue.net # Allow client to pass locale environment variables AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server UsePAM yes Does anyone have any ideas that I can try, or has experienced anything similar?

  Read the article

• Add user in CentOS 5

  - by Ron

  I created a new user in my CentOS web server with useradd. Added a password with passwd. But I can't log in with the user via SSH. I keep getting 'access denied'. I checked to make sure that the password was assigned and that the account is active. /var/log/secure shows the following error: Aug 13 03:41:40 server1 su: pam_unix(su:auth): authentication failure; logname= uid=500 euid=0 tty=pts/0 ruser=rwade rhost= user=root Please help, Thanks Thanks for the responses so far: I should add that it is a VPS on a remote computer, fresh out of the box. I can log in as the root user quite fine. I can also su to the new user, but I cannot log in as the new user. Here is my sshd_config file: # $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. #Port 22 #Protocol 2,1 Protocol 2 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh/ssh_host_rsa_key #HostKey /etc/ssh/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 768 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH SyslogFacility AUTHPRIV #LogLevel INFO # Authentication: #LoginGraceTime 2m #PermitRootLogin yes #StrictModes yes #MaxAuthTries 6 #RSAAuthentication yes #PubkeyAuthentication yes #AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no PasswordAuthentication yes # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes ChallengeResponseAuthentication no # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no GSSAPIAuthentication yes #GSSAPICleanupCredentials yes GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication mechanism. # Depending on your PAM configuration, this may bypass the setting of # PasswordAuthentication, PermitEmptyPasswords, and # "PermitRootLogin without-password". If you just want the PAM account and # session checks to run without PAM authentication, then enable this but set # ChallengeResponseAuthentication=no #UsePAM no UsePAM yes # Accept locale-related environment variables AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT AcceptEnv LC_IDENTIFICATION LC_ALL #AllowTcpForwarding yes #GatewayPorts no #X11Forwarding no X11Forwarding yes #X11DisplayOffset 10 #X11UseLocalhost yes #PrintMotd yes #PrintLastLog yes #TCPKeepAlive yes #UseLogin no #UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #ShowPatchLevel no #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner /some/path # override default of no subsystems Subsystem sftp /usr/libexec/openssh/sftp-server

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >