Search Results

Search found 7756 results on 311 pages for '64'.

Page 20/311 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

• USB MFP print server that works with Windows x64?

  - by hangy

  Right now, we are using the Longshine LCS-MFP101-2 to connect to our MFP device (printer/scanner combo) over LAN. However, the required driver (RMVUSB, Remote Virtual USB) cannot be installed on 64 bit Windows operating systems such as Windows XP x64 or Windows 7 x64. Since the distributor lists the product as "phased out", I do not expect any updated 64 bit drivers any time soon. :/ Because of that, I am searching for a relatively cheap SOHO MFP print server (1 USB port should be enough) which can be used with 32 bit and 64 bit versions of Windows. Do you have any ideas or recommendations? Thanks!

  Read the article

• Solaris 32bit / 64bit confusion

  - by goldenmean

  I have a Solaris on a AMD- uname -a gives OS Solaris 10 x86_64 (SunOS goldtpus34 5.10 Generic_144489-11 I wanted to find whether it has a 32bit or 64 bit kernel so I did /usr/bin/isainfo -k it says amd64 but when i do file /sbin/init it says ELF 32-bit LSB executable 80386 Version 1, dynamically linked, stripped Also if I do file it says ELF 64-bit LSB executable AMD64 Version 1 [SSE2 SSE FXSR FPU], dynamically linked, not stripped So is it possible to have a Kernel working in 64bit mode but System utils/process spawner(init) in 32bit mode. I am confused. How to accurately get if the OS Kernel is in 64/32 bit mode on Solaris and on Linux?

  Read the article

• XPP-32 over W7-64 on music production laptop

  - by quarlo

  I need to upgrade my laptop and need high performance for music production (recording and mixing). My audio interface manufacturer seems to be unable to successfully convert their drivers to 64-bit. I do not trust a virtual machine to handle real-time audio recording at low enough latency so ... I would like to install XP Pro 32-bit on a separate partition and dual boot since most of the machines that can handle this application now ship with Windows 7 64-bit flavors. I'd like to transit to 64-bit over time assuming M-Audio does eventually get a handle on 64-bit drivers, but really need to ensure that I can stay at 32-bit for now. Does anyone have any experience with this or something similar?

  Read the article

• How to fix massive lag on ZyXEL HomePlug AV powerline adapters?

  - by Tim Abell

  I have 3 ZyXEL Homeplug AV powerline adapters as per the one in the review below. I have two plugged in currently, one into my Be / Thompson wireless router, and one into my desktop pc (box1). every now and then the link indicator on the adapters (the mains link, not the ethernet link) goes nutty, and performance falls off a cliff (see below). http://www.gadgetspeak.com/gadget/article.rhtm/753/479266/ZyXEL_PowerLine_HomePlug_AV_PLA401.html 64 bytes from box1 (192.168.1.101): icmp_seq=1064 ttl=64 time=996 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1065 ttl=64 time=549 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1066 ttl=64 time=6.15 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1067 ttl=64 time=1400 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1068 ttl=64 time=812 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1069 ttl=64 time=11.1 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1070 ttl=64 time=1185 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1071 ttl=64 time=501 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1072 ttl=64 time=1975 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1073 ttl=64 time=970 ms ^C --- box1 ping statistics --- 1074 packets transmitted, 394 received, +487 errors, 63% packet loss, time 1082497ms rtt min/avg/max/mdev = 5.945/598.452/3526.454/639.768 ms, pipe 4 Any idea how to diagnose/fix? I'm on linux so installing the windoze software that came with them is not something I'm terribly keen to do.

  Read the article

• Batch file for Windows7 32 and 64 bits

  - by Javier Marti

  Hi guys, I need to build a batch file for Windows 7. This .bat file is just for installing an application. The issue is that I need to know if Windows 7 is 32 bits (and then run a 32 installer) or if it is a Windows 7 64 bits (then run the 64 bits installer). Which command can I use in a batch file to know if Windows 7 is 32 or 64 bits? Thanks in advance!!!

  Read the article

• Best LXDE based distro/distro that supports LXDE?

  - by Misha Koshelev

  Lubuntu is nice - but it seems the LXDE version is not as up to date as Fedora LXDE Spin or even Debian squeeze with LXDE installed... I do like Chromium on Lubuntu though... its faster and a nice touch. So, any good recommendations? I am fairly used to Ubuntu and the dpkg/apt commands, but am willing to learn. I am looking for a lightweight 64-bit distribution for my main laptop (it is by no means "old" or "low spec" but I like that Lubuntu starts up in like 2 secs). Anyway as you can see I have a strong Lubuntu bias, but there are issues like: LXDE version seems not to be recent (esp in 10.04 version which seems to work more stably for me - with Nvidia drivers etc) 64 bit install is currently a pain - requires first install of minimal CD or alternate CD both of which required wired Ethernet, then install of lubuntu from PPA. Native 64-bit support would be nice. Linux Mint LXDE, for example, is also only 32-bit. Thank you so much

  Read the article

• USB MFP print server that works with Windows x64?

  - by hangy

  Right now, we are using the Longshine LCS-MFP101-2 to connect to our MFP device (printer/scanner combo) over LAN. However, the required driver (RMVUSB, Remote Virtual USB) cannot be installed on 64 bit Windows operating systems such as Windows XP x64 or Windows 7 x64. Since the distributor lists the product as "phased out", I do not expect any updated 64 bit drivers any time soon. :/ Because of that, I am searching for a relatively cheap SOHO MFP print server (1 USB port should be enough) which can be used with 32 bit and 64 bit versions of Windows. Do you have any ideas or recommendations? Thanks!

  Read the article

• radvd won't accept non-/64 subnets

  - by Dolda2000

  I'm trying to set up radvd on a 6RD configuration (on Linux), where I have a /64 subnet, and I'm trying to use it on two distinct physical networks, so I'm trying to give each of them a /80 subnet. However, when I start radvd on these interfaces, it says this: radvd[3987]: prefix length should be 64 for int (int being the name of one of the interfaces.) I know that stateless autoconfiguration doesn't work on subnets that are larger than /64, like a /48 subnet, but AFAIK it's supposed to work on anything that is smaller than /64, so /80 shouldn't be a problem. The final effect, now, is that radvd simply advertises the wrong subnet prefix, effectively "removing" the first 16 bits of it. What is this? Am I all wrong on that, is radvd buggy, or is there some configuration option that I'm missing?

  Read the article

• "ldap_add: Naming violation (64)" error when configuring OpenLDAP

  - by user3215

  I am following the Ubuntu server guide to configure OpenLDAP on an Ubuntu 10.04 server, but can not get it to work. When I try to use sudo ldapadd -x -D cn=admin,dc=don,dc=com -W -f frontend.ldif I'm getting the following error: Enter LDAP Password: <entered 'secret' as password> adding new entry "dc=don,dc=com" ldap_add: Naming violation (64) additional info: value of single-valued naming attribute 'dc' conflicts with value present in entry Again when I try to do the same, I'm getting the following error: root@avy-desktop:/home/avy# sudo ldapadd -x -D cn=admin,dc=don,dc=com -W -f frontend.ldif Enter LDAP Password: ldap_bind: Invalid credentials (49) Here is the backend.ldif file: # Load dynamic backend modules dn: cn=module,cn=config objectClass: olcModuleList cn: module olcModulepath: /usr/lib/ldap olcModuleload: back_hdb # Database settings dn: olcDatabase=hdb,cn=config objectClass: olcDatabaseConfig objectClass: olcHdbConfig olcDatabase: {1}hdb olcSuffix: dc=don,dc=com olcDbDirectory: /var/lib/ldap olcRootDN: cn=admin,dc=don,dc=com olcRootPW: secret olcDbConfig: set_cachesize 0 2097152 0 olcDbConfig: set_lk_max_objects 1500 olcDbConfig: set_lk_max_locks 1500 olcDbConfig: set_lk_max_lockers 1500 olcDbIndex: objectClass eq olcLastMod: TRUE olcDbCheckpoint: 512 30 olcAccess: to attrs=userPassword by dn="cn=admin,dc=don,dc=com" write by anonymous auth by self write by * none olcAccess: to attrs=shadowLastChange by self write by * read olcAccess: to dn.base="" by * read olcAccess: to * by dn="cn=admin,dc=don,dc=com" write by * read frontend.ldif file: # Create top-level object in domain dn: dc=don,dc=com objectClass: top objectClass: dcObject objectclass: organization o: Example Organization dc: Example description: LDAP Example # Admin user. dn: cn=admin,dc=don,dc=com objectClass: simpleSecurityObject objectClass: organizationalRole cn: admin description: LDAP administrator userPassword: secret dn: ou=people,dc=don,dc=com objectClass: organizationalUnit ou: people dn: ou=groups,dc=don,dc=com objectClass: organizationalUnit ou: groups dn: uid=john,ou=people,dc=don,dc=com objectClass: inetOrgPerson objectClass: posixAccount objectClass: shadowAccount uid: john sn: Doe givenName: John cn: John Doe displayName: John Doe uidNumber: 1000 gidNumber: 10000 userPassword: password gecos: John Doe loginShell: /bin/bash homeDirectory: /home/john shadowExpire: -1 shadowFlag: 0 shadowWarning: 7 shadowMin: 8 shadowMax: 999999 shadowLastChange: 10877 mail: [email protected] postalCode: 31000 l: Toulouse o: Example mobile: +33 (0)6 xx xx xx xx homePhone: +33 (0)5 xx xx xx xx title: System Administrator postalAddress: initials: JD dn: cn=example,ou=groups,dc=don,dc=com objectClass: posixGroup cn: example gidNumber: 10000 Can anyone help me?

  Read the article

• Installation experiences with NDepend under Win7/64 with restricted user permissions

  - by Marko Apfel

  Today Patrick gives me a new license for his static code analysis tool NDepend for my fresh machine with Win7/64. This platform is new for me, so some things are different to Win XP. Maybe that till yet some of these things are not well enough understandanded from me. So i stepped in some traps. Here are my notes to get NDepend running. Download of NDepend Professional Edition from http://www.ndepend.com/NDependDownload.aspx   Extracted to c:\program files (x86)\NDepend   Started NDepend.Install.VisualStudioAddin.exe this failed with Okay – sounds plausible.   Copy NDependProLicense.xml to this folder   Next try with NDepend.Install.VisualStudioAddin.exe opens the integration dialog   Registering in Visual Studio failed with   Manually unblock as described (first solution hint)   and here comes my largest understanding problem. After unblocking this file   and closing this dialog the next opening shows the blocking again: Why? So the same error during integration pops up.   Okay – tried the second solution hint with copying folders Copy all to a full accessable folder under c:\temp\   Now the installation works   looks good   copying the folders back to c:\program files (x86)\NDepend   starting Visual Studio failed with     Okay – copying the folder to a private application folder c:\users\apf\My Applications\NDepend   Installing again   Now Visual Studio runs and NDepend is integrated Nevertheless my machine is only used by me, i prefer “all user”-installations. The described way works sadly only for my account.

  Read the article

• Dual Boot Installing Ubuntu 12.04 with Windows 7 (64) on a non UEFI system

  - by Randnum

  I cannot seem to install the correct boot loader for a non-UEFI firmware system. I'm trying to install Ubuntu 12.04 and Windows 7 (64) which are technically compatible with GPT but for windows only if the firmware is UEFI enabled. My system uses the old BIOS system and does not support UEFI. Therefore, whenever I finish my Ubuntu install and try to install Windows I get a "cannot install to GPT partition type" error. Even if I use Gparted to format a special NTFS file format for windows it can't handle the GPT partition style because it doesn't have UEFI. But my ubuntu install always forces GPT during installation and never asks if I want to install the old BIOS style MBR instead. How do I resolve this? Both OS's will install fine on their own the problem is when I try to install the second OS it doesn't recognize any of the other's partitions and tries to rewrite it's own on top of the other. I've tried both OS's first and always run into the same problem. Since there is no way to make Windows recognize GPT without upgrading my Motherboard how do I tell Ubuntu to use the old BIOS MBR on install? Do I have to download a special Ubuntu with a specific grub version? or should I manaually configure my partition somehow to force it not to use GPT? Thank you,

  Read the article

• Error on 64 Bit Install of IIS &ndash; LoadLibraryEx failed on aspnet_filter.dll

  - by Rick Strahl

  I’ve been having a few problems with my Windows 7 install and trying to get IIS applications to run properly in 64 bit. After installing IIS and creating virtual directories for several of my applications and firing them up I was left with the following error message from IIS: Calling LoadLibraryEx on ISAPI filter “c:\windows\Microsoft.NET\Framework\v4.0.30319\aspnet_filter.dll” failed This is on Windows 7 64 bit and running on an ASP.NET 4.0 Application configured for running 64 bit (32 bit disabled). It’s also on what is essentially a brand new installation of IIS and Windows 7. So it failed right out of the box. The problem here is that IIS is trying to loading this ISAPI filter from the 32 bit folder – it should be loading from Framework64 folder note the Framework folder. The aspnet_filter.dll component is a small Win32 ISAPI filter used to back up the cookieless session state for ASP.NET on IIS 7 applications. It’s not terribly important because of this focus, but it’s a default loaded component. After a lot of fiddling I ended up with two solutions (with the help and support of some Twitter folks): Switch IIS to run in 32 bit mode Fix the filter listing in ApplicationHost.config Switching IIS to allow 32 Bit Code This is a quick fix for the problem above which enables 32 bit code in the Application Pool. The problem above is that IIS is trying to load a 32 bit ISAPI filter and enabling 32 bit code gets you around this problem. To configure your Application Pool, open the Application Pool in IIS Manager bring up Advanced Options and Enable 32 Bit Applications: And voila the error message above goes away. Fix Filters Enabling 32 bit code is a quick fix solution to this problem, but not an ideal one. If you’re running a pure .NET application that doesn’t need to do COM or pInvoke Interop with 32 bit apps there’s usually no need for enabling 32 bit code in an Application Pool as you can run in native 64 bit code. So trying to get 64 bit working natively is a pretty key feature in my opinion :-) So what’s the problem – why is IIS trying to load a 32 bit DLL in a 64 bit install, especially if the application pool is configured to not allow 32 bit code at all? The problem lies in the server configuration and the fact that 32 bit and 64 bit configuration settings exist side by side in IIS. If I open my Default Web Site (or any other root Web Site) and go to the ISAPI filter list here’s what I see: Notice that there are 3 entries for ASP.NET 4.0 in this list. Only two of them however are specifically scoped to the specifically to 32 bit or 64 bit. As you can see the 64 bit filter correctly points at the Framework64 folder to load the dll, while both the 32 bit and the ‘generic’ entry point at the plain Framework 32 bit folder. Aha! Hence lies our problem. You can edit ApplicationHost.config manually, but I ran into the nasty issue of not being able to easily edit that file with the 32 bit editor (who ever thought that was a good idea???? WTF). You have to open ApplicationHost.Config in a 64 bit native text editor – which Visual Studio is not. Or my favorite editor: EditPad Pro. Since I don’t have a native 64 bit editor handy Notepad was my only choice. Or as an alternative you can use the IIS 7.5 Configuration Editor which lets you interactively browse and edit most ApplicationHost settings. You can drill into the configuration hierarchy visually to find your keys and edit attributes and sub values in property editor type interface. I had no idea this tool existed prior to today and it’s pretty cool as it gives you some visual clues to options available – especially in absence of an Intellisense scheme you’d get in Visual Studio (which doesn’t work). To use the Configuration Editor go the Web Site root and use the Configuration Editor option in the Management Group. Drill into System.webServer/isapiFilters and then click on the Collection’s … button on the right. You should now see a display like this: which shows all the same attributes you’d see in ApplicationHost.config (cool!). These entries correspond to these raw ApplicationHost.config entries: <filter name="ASP.Net_4.0" path="C:\Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_filter.dll" enableCache="true" preCondition="runtimeVersionv4.0" /> <filter name="ASP.Net_4.0_64bit" path="C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_filter.dll" enableCache="true" preCondition="runtimeVersionv4.0,bitness64" /> <filter name="ASP.Net_4.0_32bit" path="C:\Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_filter.dll" enableCache="true" preCondition="runtimeVersionv4.0,bitness32" /> The key attribute we’re concerned with here is the preCondition and the bitness subvalue. Notice that the ‘generic’ version – which comes first in the filter list – has no bitness assigned to it, so it defaults to 32 bit and the 32 bit dll path. And this is where our problem comes from. The simple solution to fix the startup problem is to remove the generic entry from this list here or in the filters list shown earlier and leave only the bitness specific versions active. The preCondition attribute acts as a filter and as you can see here it filters the list by runtime version and bitness value. This is something to keep an eye out in general – if a bitness values are missing it’s easy to run into conflicts like this with any settings that are global and especially those that load modules and handlers and other executable code. On 64 bit systems it’s a good idea to explicitly set the bitness of all entries or remove the non-specific versions and add bit specific entries. So how did this get misconfigured? I installed IIS before everything else was installed on this machine and then went ahead and installed Visual Studio. I suspect the Visual Studio install munged this up as I never saw a similar problem on my live server where everything just worked right out of the box. In searching about this problem a lot of solutions pointed at using aspnet_regiis –r from the Framework64 directory, but that did not fix this extra entry in the filters list – it adds the required 32 bit and 64 bit entries, but it doesn’t remove the errand un-bitness set entry. Hopefully this post will help out anybody who runs into a similar situation without having to trouble shoot all the way down into the configuration settings and noticing the bitness settings. It’s a good lesson learned for me – this is my first desktop install of a 64 bit OS and things like this are what I was reluctant to find. Now that I ran into this I have a good idea what to look for with 32/64 bit misconfigurations in IIS at least.© Rick Strahl, West Wind Technologies, 2005-2011Posted in IIS7   ASP.NET  

  Read the article

• java+netbeans+mysql+ubuntu 64 bits LTS VS C#+MS SQL for fast develop trading system

  - by crunchor

  I am going to build a trading system and use with the broker "Interactive Broker" API. The API supports C++ Socket, Java Socket, DDE, Active X APIs in Windows. The API supports Java Socket API, Posix C++ Socket API in Unix kind like Ubuntu. My trading system has some real time long calculations to do and a lot of maths for backtest. I am using a retail trading program Amibroker which is written in C++ and I run it in windows xp 32 bits, it will take me days to do one serious backtest with my G620 Sandy Bridge CPU and 3GB of ram. So for my trading system, I need to have 1. speed, 2. stability, 3. fast development I have done some research, C++ is fastest but I am not good at it and it takes much longer time to develop. Other than C++, Java in linux has the best speed. I also did some research for database and look like mysql has the best speed. Mysql and PostgreSQL both are very popular open source sql db, which one should I choose? I see MySQL has Workbench now which looks like similar to MS SQL management studio so look like a good start. Netbeans should be the most popular Java IDE now and seem like its GUI design can be as easy as Virtual Studio now. I am not sure if made by Netbeans would affect the speed and if its GUI design is really that good and easy to use. Ubuntu 64 bits LTS has good long term support, good community support, and stable. I will buy a new computer if I can create a good trading system for live trading and backtest. Very likely I will buy a I7 or I5 depends on if I7 can really have better speed for my case. Actually I mainly deal with C# in my jobs and I just knew java but not good at java. What would you guys recommend? Any better solution? This will be a big project and very likely life long project for me so I seriously do research including asking you guys before I start and focus on what I should, thanks!

  Read the article

• Deploying 32 and 64 bit COM objects on 64 bit machine from one VS setup project MSI.

  - by hooligan

  I have a Shell Namespace Extension C++ COM DLL that must have both a 32 bit and 64 bit version installed on a 64 bit machine, because when 32 bit applications perform a file- open the dialog that is presented is a 32 bit shell. The problem is that both my 32 bit and 64 bit COM objects have the same progid and the VS setup project will throw an error when including two files with the same progid. How do I get around this issue if I want to maintain the same code for both 32 and 64 bit? Currently I just have two different MSI's (32 and 64) and they both must be ran on the 64 bit machine.

  Read the article

• How to update GIgabyte X58 BIOS in 64bit Windows?

  - by sloughk

  I want update my ex58 GIGABYTE motherboard but there is no their bios update tool is not compatible with 64bit, I'm getting this: --------------------------- Unsupported 16-Bit Application --------------------------- The program or feature "\??\X:\Downloads\motherboard_bios_ga-ex58-ud4_f7d\FLASHSPI.EXE" cannot start or run due to incompatibity with 64-bit versions of Windows. Please contact the software vendor to ask if a 64-bit Windows compatible version is available. --------------------------- OK What can I do?

  Read the article

• Windows 7 x64 "upgrade" repair fails

  - by Polynomial

  I've been running into issues with Windows Update, which I can't seem to fix. The hotfixes don't work, nor does the Windows update readyness tool, or the manual SP1 upgrade. I get various esoteric errors which nobody seems to have a fix for. Looks like some of the update cache is corrupt and digital signatures seem to be broken on some packages / Windows Update components. Long story short, I have discovered the only option is to do a repair operation on the OS, to repair everything. It's so corrupt that only a complete replacement will fix it. According to various sources (including MSKB) one can perform a repair by running an in-place upgrade. I've got the Windows 7 Ultimate retail disc, which I've inserted into my machine. I ran setup.exe and went through in the following order: Install now Go online to get latest updates (I've also tried not getting updates) Wait for updates to be downloaded Select Windows 7 Ultimate (x64 architecture) and click next Accept the T&Cs, click next Click Upgrade At this point it spends a minute on the "checking compatibility" screen, after which I get the following error: The following issues are preventing Windows from upgrading. Cancel the upgrade, complete each task, and then restart the upgrade to continue. You can’t upgrade 64-bit Windows to a 32-bit version of Windows. To upgrade, obtain a 64-bit version of the installation disc, or go online to see how to install Windows 7 and keep your files and settings. 32-bit Windows cannot be upgraded to a 64-bit version of Windows. To upgrade, obtain a 32-bit version of the Windows installation disc. It also mentions a warning about potential conflicts with a storage driver and VS2010, but that doesn't seem to be the blocking issue. My currently installed version of Windows is Ultimate 64-bit (absolutely sure of this) and the disc is definitely a x86 / x64 combined Ultimate retail disc. There seem to be a few people who have run into this (e.g. this question), but I've not seen any answers. I've checked the event viewer, but can't spot anything in there that's related. Any idea how I can get this working? P.S: Just to pre-empt the inevitable "are you suuuuuuuuuuuuure it's x64 Ultimate?" questions:

  Read the article

• Are there any advantages to using windows 7 ultimate? I can't tell the diference

  - by Jack Dawson

  I just upgraded my new desktop which came installed with Windows 7 Home Premium 64 bit with a copy of Windows 7 Ultimate 64 bit and so far I have not noticed any difference in performance. Even my Windows Experience Index number is the same 5.5 that it was before the upgrade. So what's the point, are there any performance advantages that I'm not seeing? Additional Info My system hardware specs: AMD quad core 2.6 GHZ 1 TB 4200 RPM HDD 8 GB DDR2 RAM ATI Radeon HD 4650 w/ 1GB dedicated video memory

  Read the article

• Windows 7 FTP Connection Ignores File Type Associations

  - by Travis

  I have an FTP connection active through the Map Network Drive option in Windows 7 64-bit. When navigating the remote directory, I see no way to edit files. Windows is completely ignoring file-type associations and "opens" everything with my default browser. Is there any way that I can simply edit these files? I'm open to suggestions of other software as well, but from what I can see, NetDrive doesn't work with 64-bit.

  Read the article

• Where can I get precompiled mod_perl, mod_python for Apache on Win64?

  - by Soumya92

  I have managed to set up pure 64-bit Apache, PHP, MySQL, and 64-bit distributions of Perl and Pyton. However, I cannot get Apache to automatically parse .pl files with Perl, and .py files with Python. Looking around points to mod_perl and mod_python for Apache, which unfortunately fail to build. Is there any precompiled mod_perl, mod_python for Win64? Or is there any other way of getting .pl, .py to work on Apache?

  Read the article

• On Windows 7, how to check that applications are in the correct Program Files directory?

  - by Anon Guy

  In Windows 7, applications should be installed to "Program Files" or "Program Files (x86)" depending on whether they are 64-bit or 32-bit (respectively, as per this page). Is there an easy way to check that all the applications on my system are in the correct Program Files directory? To put it another way, is an easy way to detect any 32-bit applications in "Program Files" and 64-bit applications in "Program Files (x86)"?

  Read the article

• Netgear FVS336G: appropriate solution for today's small businesses?

  - by bwerks

  Hey all, I've been looking into a routers to facilitate a vpn solution for a small business. While the Netgear FVS336G looks good on paper, it appears to have some fairly crippling setbacks that drag down what appears to be some great hardware. First off, the unit has been around for a couple years now, perhaps before 64-bit operating systems were as common as they are now, and complaints are everywhere that claim that SSL or IPsec (or both) VPN connections will not work with 64-bit operating systems. However, most of these claims mention only Vista, which makes me think that these problems could have potentially been solved since then. Unfortunately though, Netgear's support forums seem to be incredibly private, and policed by some troll named jmizuguchi who just closes down public posts in order to marshal them into the private ones. Danger, will robinson. Apparently their firmware upgrade process is a nightmare too, but that's beside the point. My question is this: has anyone configured one a Netgear FVS336G to operate in a server 2008 (or R2)/windows 7 64-bit network? If so, is it possible to use the microsoft vpn client or are third party clients still required? If this thing has just failed the test of time, is there a feature-comparable unit that I've missed, at anywhere near the same price range? Thanks!

  Read the article

• Dell Driver Support for Latitude E6320 Windows 7 Enterprise

  - by IamPolaris

  I recently did a reinstall of Windows 7 Enterprise on a Dell Latitude E6320, which is a 64 bit system. After the install process, and doing typical Windows Update stuff, I looked at my Device Manager and found that I had devices which were missing drivers. My missing drivers: After going to the Dell Support site and looking at the files, and doing some sleuthing I found the following support document: http://downloads.dell.com/utility/Latitude%20E-Family%20%20Mobile%20Precision%20Re-Image%20How-To%20Guide%20-%20A03%20Rev%203%200.pdf This document hints in appendix C that the Broadcom USH is the Control Point Security and the Unknown device is Micro freefall sensor. The network controller is my wireless, as I cannot connect wirelessly, and the final missing driver I am not sure. Attempting to install the control point security exe on the support page will not work. After downloading, I am given the message that I am attempting to install a 32 bit driver on a 64 bit machine EVEN THOUGH I selected the win7 64 bit option from the support page. Beyond that, some of the drivers (Which are confusing to read and hard to understand what they do) and the system utilities which are supposedly supposed to make this process simpler will either a) not run because they are 32 bit exe's or b) the support page cannot find the file attempted to download. Is there anything I can do to get (at the very least) my wireless running, but idealistically all of my drivers. A solution which assumes Dell is completely incompetent would be ideal. :P Some forums have said that I should download the chipset driver, others say to get the system utility file (DSS_UTIL_WIN_R282536.EXE). I have had no luck as of yet...

  Read the article

• using a 64-bit compiler in microsoft visual c++

  - by Ben

  this question is essentially identical to an earlier question i had that didn't receive any answers. hopefully someone can help me out this time. i am trying to compile a vc++ project as 64 bit using visual c++ express 2010. i know that the 64 bit compiler does not come with the default installation of vc++ express so i installed windows sdk for windows 7 as specified here (http://msdn.microsoft.com/en-us/library/9yb4317s.aspx) which includes the 64 bit compiler as i understand. however, there is still no 64 bit option in the configuration manager for vc++. after some searching i found and completed this tutorial (http://jenshuebel.wordpress.com/2009/02/12/visual-c-2008-express-edition-and-64-bit-targets/) as well as the various links at the bottom of this page. despite all my efforts, i still cannot get the 64 bit compiler to show in vc++ (i.e. the 64 bit compiler won't show under "active solutions platform" in the configuration manager). if anyone has any experience/tips with getting this to work i would really appreciate it. fyi - i am running windows 7(x64).

  Read the article

• Javascript CS-PRNG - 64-bit random

  - by Jack

  Hi, I need to generate a cryptographically secure 64-bit unsigned random integer in Javascript. The first problem is that Javascript only allows 64-bit signed integers, so 9223372036854775808 is the biggest supported integer without going into floating point use I think? To fix this I can use a big number library, no problem. My Method: var randNum = SHA256( randBigInt(128, 0) ) % 2^64; Where SHA256() is a secure hash function and randBigInt() is defined below as a non-crypto PRNG, im giving it a 128bit seed so brute force shouldn't be a problem. randBigInt(n,s) //return an n-bit random BigInt (n>=1). If s=1, then the most significant of those n bits is set to 1. Is this a secure method to generate a cryptographically secure 64-bit random int? And importantly does taking the 2^64 mod guarantee 100% I have a 64-bit number? An abstract example, say this number is prime (it isn't i know), I will use it in the Galois Field [2^p], where p must be 64bits so that every possible 1-63bit number is a field element. In this query, my random int must be larger than any 63-bit number. And Im not sure im correct in taking the 2^64 mod of a 256bit hash output. Thanks (hope that makes sense)

  Read the article

• Mac 10.5 Python libsvm 64 bit vs 32 bit

  - by shadowsoul

  I have a Mac 10.5 when I type "python" in terminal, it says Enthought Python Distribution -- www.enthought.com Version: 7.3-2 (64-bit) Python 2.7.3 |EPD 7.3-2 (64-bit)| (default, Apr 12 2012, 11:14:05) [GCC 4.0.1 (Apple Inc. build 5493)] on darwin Type "credits", "demo" or "enthought" for more information. then I go to my libsvm/python folder and type "make" which results in make -C .. lib if [ "Darwin" = "Darwin" ]; then \ SHARED_LIB_FLAG="-dynamiclib -W1,-install_name,libsvm.so.2"; \ else \ SHARED_LIB_FLAG="-shared -W1,-soname,libsvm.so.2"; \ fi; \ g++ ${SHARED_LIB_FLAG} svm.o -o libsvm.so.2 when I try to do "from svmutil import *" I get the error: OSError: dlopen(.../libsvm-3.12/python/../libsvm.so.2, 6): no suitable image found. Did find: .../libsvm-3.12/python/../libsvm.so.2: mach-o, but wrong architecture when I do "lipo -info libsvm.so.2", I get: Non-fat file: libsvm.so.2 is architecture: i386 So it looks like I'm running 64-bit python but libsvm ends up as a 32-bit program. Any way I can get it to compile as a 64-bit program?

  Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >