Search Results

Search found 1309 results on 53 pages for 'amd athlon'.

Page 20/53 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

  • Internet unusably slow with Realtek Semiconductor Co., Ltd. RTL8111/8168B card

    - by user42424
    So I have recently installed Ubuntu 11.10 for a dual boot with wind 7. After the install I had like 300 updates, so I installed them. At first I could use the internet, although it was extremely slow. However now I cannot, sometimes it will load and others it will simply time out. When I try to download something it will either take forever or will not at all. This is a wired system. On Windows side my speeds are fine. Any help would be greatly appreciated. Also like I said I am new to Linux/Ubuntu so please be nice. One last thing, I also installed 11.10 for same dual boot on my laptop, and wireless speed is the same as on Windows? Only the wired desktop gives me the problem? Hear is some hardware info.. Hope it helps. Mobo: Gigabyte GA=880GMA- AMD / CPU: AMD Phenom (tm) IIx4 965 / 16 GB Ram / Realtek PCIe GBE Family Controller / Cisco Linksys E2000 / Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) / eth0 Link encap:Ethernet HWaddr 50:e5:49:33:64:cf inet addr:192.168.1.118 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::52e5:49ff:fe33:64cf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:76722 errors:0 dropped:76722 overruns:0 frame:76722 TX packets:49692 errors:0 dropped:65 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:107956638 (107.9 MB) TX bytes:4342553 (4.3 MB) Interrupt:44 Base address:0x2000 thanks to roadmr problem solved! I powered down PC, un plugged power from pc end, waited a few (maybe 3)minutes. plugged power back in, pushed and held power button for 30 + seconds. Let go, powered on PC, and my Internet is fine! downloads and web speed blaze, just like on my Win 7 boot, maybe even faster. Problem Solved, Thanks to all!! **

    Read the article

  • Acer Aspire 5542G overheating with ubuntu/kubuntu 12.04

    - by james
    I have an Acer Aspire 5542G laptop purchased couple of years ago. All these days, i used windows 7 on it . Then I tried ubuntu 12.04 . Everything was fine except the overheating issue. I updated ubuntu with all security fixes and available updates but nothing solved the problem. With idle use like internet browsing, the cpu fan speeds up a lot and i can feel very hot air coming from the vent (comparable to playing serious 3d game in windows). But it will not go to a point of freeze and shutdown. But as long as im using it, with no intensive tasks at all, the laptop stays too hot. This wasn't the case with windows7. In windows 7 the fan will not rotate at all with normal use. I heard there was manufacturing defect with some acer laptops, but i think it wasn't the case with my laptop since windows7 runs perfectly. I updated the bios to latest version. I cleaned dust in the vents. I tried kubuntu 12.04 up-to-date. Nothing solved the issue. My laptop specs are: CPU : AMD turion2 x2 M500 @ 2.2GHz GPU : AMD Mobility Radeon HD4570 3GB RAM and 320GB hard disk.

    Read the article

  • Should I use OpenGL or DX11 for my game?

    - by Sundareswaran Senthilvel
    I'm planning to write a game from scratch (a BIG Game, for commercial purpose). I'm aware that there are certain compute libraries like OpenCL, AMD APP SDK, C++ AMP as well as DirectCompute - both from MS (NOT interested in CUDA) are available in the market. I'm planning to write the game from the scratch, which includes the following engines... Physics Engine AI Engine Main Game Engine (... and if anything is missed). I'm aware that, there are some free physics engine libraries in the market. Not sure about free AI engine libraries. I'm bit confused in choosing between the OpenCL, AMD APP SDK, and C++ AMP libraries (as already mentioned i'm NOT interested in CUDA). I want my game to be published in Windows/Android/Mac OSX. It means it should be a cross-platform game. I will be having "one source code" that i'll compile for various platforms like Windows/Android/Mac OSX, and any others if i missed. Note: Since I'm NOT a Java guy, kindly do NOT suggest me the Java Language. For Graphics language should i use OpenGL or DirectX 11? I have heard that OpenGL runs on a single core, and not sure of DirectX 11. Between OpenGL and DirectX which one should i follow? or else, are there any other graphics language that i need to start with? I want to make use of the parallelism in GPU as well as CPU.

    Read the article

  • Bad Performance With Games Under Wine in Ubuntu 12.04

    - by Pandem
    I'm somewhat new to Linux. I've dabbled with it before but never more than just experimentation in a VM or dual boot where I almost always reverted back to Windows soon after (more due to a lack of commitment than a dislike for the OS). Anyway my problem is that in the two games (Guild Wars and Team Fortress 2) I've tried so far I get fairly bad performance. Despite both games having a "Platinum" rating I've still been forced to run both in DirectX 8, otherwise they either crash, have texture defects or the UI is missing. By "bad performance" I mean sub-30 FPS where there are some players and regular large framerate drops with video settings on low. Currently in my mind I believe the performance issues are just a problem with the drivers because my graphics card is a AMD 7850 which is virtually brand new and probably not properly supported yet but I'm unsure and would appreciate advice or tips to improve things. I have Ubuntu 12.04 installed and I am usually logged in a Gnome Classic session. I have installed AMD's proprietary drivers (Catalyst version 12.4) and have Wine 1.4 installed. I have used Winetricks to install DX9/DX10 dlls and other things.

    Read the article

  • Is my graphics card in use or not?

    - by Lindhe94
    I have a Samsung Series 7 NP730U3E which is running Ubuntu Gnome 13.10. This computer have an Intel Core i5 3337U an AMD Radeon HD 8570M on the inside. Ubuntu 13.10 is said to have driver support for this graphics card, but I am not sure whether or not this is the case. When I check System Settings Details it says "Graphics: Intel® Ivybridge Mobile" and lspci | grep VGA returns VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09). But lshw -c video returns *-display description: Display controller product: Mars [Radeon HD 8730M] vendor: Advanced Micro Devices, Inc. [AMD/ATI] physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:47 memory:e0000000-efffffff memory:f7e00000-f7e3ffff ioport:e000(size=256) memory:f7e40000-f7e5ffff *-display description: VGA compatible controller product: 3rd Gen Core processor Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:f7800000-f7bfffff memory:d0000000-dfffffff ioport:f000(size=64) What is the case? Is my graphics card is use, or do my laptop have undiscovered powers yet to yield?

    Read the article

  • No Unity after ubuntu 12.10 upgrade

    - by Aivaras
    After I upgraded to Ubuntu 12.10 from 12.04, there was low graphics and no Unity. Just the mouse and the wallpaper. So, I got into the terminal via Ctrl+Alt+T, launched Chrome and searched for a solution. As a result, I tried this: sudo sh amd-driver-installer-12.6-legacy-x86.x86_64.run It did not work. Then I tried this: sudo add-apt-repository ppa:makson96/fglrx sudo apt-get update sudo apt-get upgrade sudo apt-get install fglrx-legacy It did not work too. I removed the repository, got back the the xorg version to 1.13, and tried this: sudo sh /usr/share/ati/fglrx-uninstall.sh sudo apt-get remove --purge fglrx fglRx_* fglrx-amdcccle* fglrx-dev* xorg-driver-fglrx sudo apt-get remove --purge xserver-xorg-video-ati xserver-xorg-video-radeon sudo apt-get install xserver-xorg-video-ati sudo apt-get install --reinstall libgl1-mesa-glx libgl1-mesa-dri xserver-xorg-core It did return the screen resolution back, but still no Unity. Is there something what could I do? My graphics card is: lspci | grep VGA 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV620 [Mobility Radeon HD 3400 Series]

    Read the article

  • Game Development

    - by Sundareswaran Senthilvel
    I'm planning to write a game from scratch (a BIG Game, for commercial purpose). I'm aware that there are certain compute libraries like OpenCL, AMD APP SDK, C++ AMP as well as DirectCompute - both from MS (NOT interested in CUDA) are available in the market. I'm planning to write the game from the scratch, which includes the following engines... 1.Physics Engine 2.AI Engine 3.Main Game Engine (... and if anything is missed). I'm aware that, there are some free physics engine libraries in the market. Not sure about free AI engine libraries. I'm bit confused in choosing between the OpenCL, AMD APP SDK, and C++ AMP libraries (as already mentioned i'm NOT interested in CUDA). I want my game to be published in Windows/Android/Mac OSX. It means it should be a cross-platform game. I will be having "one source code" that i'll compile for various platforms like Windows/Android/Mac OSX, and any others if i missed. Note: Since I'm NOT a Java guy, kindly do NOT suggest me the Java Language. For Graphics language should i use OpenGL or DirectX 11? I have heard that OpenGL runs on a single core, and not sure of DirectX 11. Between OpenGL and DirectX which one should i follow? or else, are there any other graphics language that i need to start with? I want to make use of the parallelism in GPU as well as CPU.

    Read the article

  • Acer AM1100 stuck on Verify DMI Pool Data

    - by r0ca
    I have an Acer AM1100 and I just installed Windows 7 Ultimate. Windows has properly installed but right now, when I boot up the system, I get stuck on "Verify DMI Pool Data". I also tried to reinstalled the whole thing but this happens again... Any takers? It's an Acer AM1100 Athlon x2 2go Ram Sata HDD 320go

    Read the article

  • Palit GeForce 8800GT 512MB Minimum Power Requirement?

    - by Wesley
    Hi all, I am building a system for a friend. The potential specs are like this so far: ASUS A8N-VM motherboard AMD Athlon 64 3200+ @ 2.0 GHz Any 7200RPM SATA HDD Palit GeForce 8800GT 512MB GDDR3 PCIe One DVD/CD combo drive Creative SB Live! 5.1 sound card I was wondering what wattage of power supply would be able to support this hardware. I had a 350W in mind... would that do? Thanks in advance.

    Read the article

  • Motherboard Is A MCP61PM-HM Rev 1.OB

    - by Dennis Smith
    I have a compaq presario pc SR5110NX The Processor is AMD Athlon 64 Proceessor3800+ It has 512 mb of Ram and a 40gb Hard Drive Here is my problem I Have 2 Sata One Is Black and the other Is White I have 2 red little cables and they have the letters and numbers on them It Is HP P/N:5188-2897 0720 on the side of the cable.Here is the Mother Board MCP61PM-HM Rev 1.0B I need to now where do the two Sata Connectors Connect Too Please Help Thank You So Much.Ps I am running windows XP Pro

    Read the article

  • Blue screen of death when moving files

    - by kevin
    i just bought a new hp amd II athlon quad core and everytime i try to move file off my desktop to a hard drive or off my hard drive to my desktop of atleast a 1g or more my computer restarts itself and gives me the blue screen of death can someone please tell me why

    Read the article

  • win7 64 bit. Fresh install on fresh pc fails with BSOD.

    - by 0plus1
    Hello, I've built a new machine: ASUS M4A785TD-V EVO OCZ DDR3 PC3-12800 (2x 2gb) Amd Athlon II X4 630 Box AM3 I tried memtest with hiren boot cd (tested only 3gb) and showed no error. Then I tried the built in ram test from the win7 cd (2 passes no errors). I also deleted with a 0 pass the hard drive. The error I get is this: 0x0000007e (0xFFFFFFFFFC0000005,0xFFFFF8000C1AB0F3,0xFFFFF880009A8498,0xFFFFF880009A7CF0) Any help is greatly appreciated. Thank you!

    Read the article

  • Cassandra on heterogeneous servers

    - by happy-coding
    I am currently running 4 cassandra nodes with the following hardware in a Apache Cassandra cluster: AMD Athlon 64 X2 6000+ 8G RAM 750G hard disk It shows not such a good writing performance and a really bad read performance with sometimes also timeouts. I was wondering if it makes sense to add 2 nodes with a different hardware (8 CPUs and more RAM) to improve this. Or does a cassandra cluster works best with the same hardware in every node? Thanks & best regards

    Read the article

  • How much power supply does a typical PC build need?

    - by Wesley
    I am building a system for a friend. The potential specs are like this so far: ASUS A8N-VM motherboard AMD Athlon 64 3200+ @ 2.0 GHz Any 7200RPM SATA HDD Palit GeForce 8800GT 512MB GDDR3 PCIe One DVD/CD combo drive Creative SB Live! 5.1 sound card I was wondering what wattage of power supply would be able to support this hardware. I had a 350W in mind... would that do?

    Read the article

  • Weird graphics behaviour while playing games

    - by Ayush Khemka
    When I play any high-end game like NFS Most Wanted or FIFA 12, I get these weird things on my graphics. While playing NFS, my car has various transparent diamonds all over its body, and while playing FIFA I get these weird black lines all over the field. My PC specs are :- AMD Athlon II X2 ASUS M4A785D-M PRO 500GB Seagate HDD 2GB DDR2 Transcend RAM 1033Mhz ATI Radeon HD4350 512MB graphics card Tell me if I need to provide anything else. Please help me. Thanks.

    Read the article

  • Is the Windows 7 default graphic driver faster than the newest NVIDIA Forceware?

    - by netvope
    Here is my Windows 7 Experience Index using the stock graphics driver: And after installing the newest driver Forceware 197.45, it becomes: The only change is that the "Gaming graphics" subscore drops from 6.4 to 5.2. Is the stock graphic driver more optimized for Windows 7? Or is Forceware 197.45 buggy? Should I revert back to the stock driver? My configuration: Athlon 64 X2 5000+ Asus M2A-VM (AMD 690G, SB600) 6 GB DDR2-800 RAM (only 3.25 GB usable under Windows) GeForce 8600 GT (256 MB) Windows 7 Ultimate 32-bit

    Read the article

  • Typing in web forms lagging - output very slow!

    - by intransit
    Hi all, Just recently, typing in forms on the internet has become rediculously slow. I'm on an oldish PC with low memory (1gb) and amd athlon XP 2800+ (2.08 ghz) and get an awesome 1.0 rating from windows :) Thing is though - it only just started happening. Was fine last week. Also, It doesn't only happen when heaps of other processes are open/running. I can have only one IE window up, after fresh reboot, and still happens. Any ideas why?

    Read the article

  • How do I compile on linux to share with all distributions?

    - by Andrew M
    I compiled a PHP extension on Fedora Core 12, but when I send it to someone using CentOS they get the error: "ELF file OS ABI invalid" I'm not sure what causes this running file provides the following info: ELF 64-bit LSB shared object, AMD x86-64, version 1 (GNU/Linux), not stripped An extension that loads fine provides the following from file: ELF 64-bit LSB shared object, AMD x86-64, version 1 (SYSV), not stripped So it seems I need to generate a SYSV type file for some distributions, instead of a GNU/LINUX file, no idea how though. Any pointers? Also should I be statically linking?

    Read the article

  • Application Does Not Start in Windows 7

    - by Jim Fell
    I recently installed a new 60GB SSD as my primary hard drive and re-installed Windows 7 Professional 64-bit. I then installed SSD Fresh from Abelssoft to optimize Windows to run on the SSD. It seemed to install okay, but when I try to run the utility, its splash screen appears briefly before it quietly closes. No errors are displayed; the utility just fails to launch. I have run SSD Fresh on another SSD-equipped Windows 7 Pro x64 computer in the past without any problems. Does anyone know what might be preventing the program from running? I tried running sfc /scannow from the command line (with administrator privileges), shutting down the Spybot Resident, and disabling the firewall and virus scanner. I also tried running the tool as administrator; I even tried reinstalling it, running the installer as administrator. No luck. Every time I try to launch the program the Event Viewer logs this same set of errors: Error 4/2/2012 11:35:44 PM Application Error 1000 (100) Faulting application name: SSDFresh.exe, version: 1.0.0.0, time stamp: 0x4f2a45d8 Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000 Exception code: 0xc0000005 Fault offset: 0x000007ff0016dbba Faulting process id: 0x994 Faulting application start time: 0x01cd11fd9fe978df Faulting application path: C:\Program Files (x86)\SSD Fresh\SSDFresh.exe Faulting module path: unknown Report Id: dfeed551-7df0-11e1-a2c7-002522c47ec0 Error 4/2/2012 11:35:43 PM .NET Runtime 1026 None Application: SSDFresh.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception. Exception Info: System.NullReferenceException Stack: at AbBugReporter.BugForm.InitLanguage() at AbBugReporter.BugForm..ctor(AbFlexTrans.LanguageInfo, AbBugReporter.BugReportManager, Boolean) at AbBugReporter.BugReportManager.Show(System.Exception) at SSDFresh.App.App_DispatcherUnhandledException(System.Object, System.Windows.Threading.DispatcherUnhandledExceptionEventArgs) at System.Windows.Threading.Dispatcher.CatchException(System.Exception) at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate) at System.Windows.Threading.Dispatcher.WrappedInvoke(System.Delegate, System.Object, Int32, System.Delegate) at System.Windows.Threading.Dispatcher.InvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32) at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr) at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef) at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame) at System.Windows.Application.RunInternal(System.Windows.Window) at System.Windows.Application.Run() at SSDFresh.App.Main() Error 4/2/2012 11:35:39 PM SideBySide 59 None Activation context generation failed for "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\csc.exe".Error in manifest or policy file "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\csc.exe.Config" on line 0. Invalid Xml syntax. Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None For those who are interested, here is my system configuration: ASRock M3A770DE AM3 AMD 770 ATX AMD Motherboard AMD Athlon II X3 455 Rana 3.3GHz Socket AM3 95W Triple-Core Desktop Processor ADX455WFGMBOX G.SKILL Value Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Model F3-10600CL9D-8GBNT Mushkin Enhanced Chronos Deluxe MKNSSDCR60GB-DX 2.5" 60GB SATA III Synchronous MLC Internal Solid State Drive (SSD) (Primary/Boot HD) Western Digital Caviar Blue RFHWD1600AAJS 160GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive (Secondary HD) Sony Optiarc CD/DVD Burner Black SATA Model AD-7261S-0B LightScribe Support RAIDMAX RX-850AE 850W ATX12V v2.3 / EPS12V SLI Certified CrossFire Ready 80 PLUS GOLD Certified Modular Active PFC Power Supply ASUS HD7850-DC2-2GD5 Radeon HD 7850 2GB 256-bit GDDR5 PCI Express 3.0 x16 HDCP Ready CrossFireX Support Video Card Asus ML228H 21.5" Full HD LED BackLight LED Monitor Slim Design (x3)

    Read the article

  • Waiting for required medium software center

    - by tavoe
    I'm trying to install the proprietary AMD drivers through Software Sources. I tick the box for fglrx-updates, and it says applying changes and fills 10% of a progress bar. It then sites there for hours (I left the computer unattended). Trying to get this process to finish, I found that the Ubuntu software center progress tab display a message reading: Applying Changes: Waiting for required medium What in the world does that mean and how can I get it to move on?

    Read the article

  • Ubuntu 12.04.1 desktop monitor Out of Range

    - by Zach
    I know this question has been asked many-a-times, but I cant seem to get a definate answer to it. I am running Ubuntu 12.04.1 LTS on my HP Pavillion a6 109n PC. Processor is a AMD Athlon 64 x2 Dual core Processor. Everytime I boot up my desktop, it runs BIOS, then it boots up Linux. After about 10 seconds, a little blue screen comes up saying: Out of Range: H. Frequency: 92.7KHz V. Frequency: 58.3Hz Can anyone help with this? Thanks! Zach

    Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >