Search Results

Search found 1812 results on 73 pages for 'amd radeon'.

Page 20/73 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

  • At what point does the performance gap between GPU & CPU become so great that the CPU is holding back a system?

    - by Matthew Galloway
    I know that generally speaking for gaming performance the GPU is the primary factor which holds back performance, with everything else such as RAM/motherboard/PSU/CPU being secondary in importance to the graphics card. But at some point the other components ARE going to be significant in holding back the whole system! For instance nobody would be silly enough to play modern games with 512MB RAM and the very latest graphics cards (such as an HD7970) as I bet the performance increase over such a system with only 512MB but a mid range card would be non-existent! Thus it would be a "waste" for such a person to buy any high end graphics card without resolving first the system's other problems. The same point applies to other components, such as if it only had a Pentium II a current high end graphics card would be wasted on it! So my core question is how do you determine at what point for your system is spending on extra GPU power be completely "wasted"? (also, a slightly more nuanced question is trying work out at what point might the extra graphics power not be "wasted" but would be "sub optimal" value for money, when the expenditure should then be split around graphics card and other components. As obviously a gamer shouldn't always just spend on upgrading the graphics card! But needs to balance it out)

    Read the article

  • Should I bother upgrading my Opteron 270 Server?

    - by MousePad
    I have an Opteron Server machine (in a large workstation class case) running on the Tyan 2895 motherboard. It's a dual CPU socket board, but I only have one 270 in there. I have 4GB of RAM, but less than 3GB is addressable, even in 64bit mode, due to the way the board is designed. Is it worth spending a few hundred on an additional CPU and maybe some more RAM? The other problem is that one of the two SATA ports on the board had its wire socket break off. So only one drive can be run as of now. I could have it repaired, but at what cost? Add in the fact that the power supply is gunked up with dust and it's a bit of a nightmare. I actually work about it getting too hot. Seems that for the money I could buy a new server rack from Dell, but it also seems a shame to waste an otherwise working, and for my needs still very fast machine.

    Read the article

  • Does the Acer Ferrari One support hardware assisted virtualization?

    - by cmeerw
    Does anyone know if the Acer Ferrari One supports hardware assisted virtualization (it should easy to find out by running Microsoft's Hardware-Assisted Virtualization Detection Tool on that machine). There is lot's of speculation around the web, but I haven't found a definitive answer yet (and would like to confirm that this feature will be working before buying one).

    Read the article

  • Ubuntu 13.10 AMD/ATI proprietary driver slow boot time, black screen after logging in and lengthy login/logout delays

    - by NahsiN
    Ubuntu 13.10 is causing me major headaches with my AMD/ATI HD 5770 GPU. Below is a list of problems I am currently encountering. 1) The boot time is extended by at least 25s after installing catalyst 13.4. Using open source radeon drivers, my boot time till the login screen is ~10s. With catalyst 13.4 installed, the boot time increases to ~35s. This was not the case in Ubuntu 13.04, 12.10 or 12.04. I have done the driver installation manually (instructions from wiki.cchtml.com) and using software center and there is no difference. I have not tried the catalyst 13.8 beta driver. 2) After manual installation of catalyst 13.4, I get stuck at a black screen after logging in. I have to purge fglrx to resolve the problem. I tried sudo amdconfig --initial -f but it didn't help. 3) The delay between logging in and unity being displayed is ~10-15s for BOTH open source and proprietary drivers. During the delay, it's just a black screen. Whenever I logout, there is again a ~10-15s delay with the login screen appearing stuck before lightdm allows me to enter my password again. This is ridiculous! Yes, I could stick with open source radeon drivers but I would like to install Steam and play my Valve collection on the machine. Is anybody else encountering similar issues?

    Read the article

  • GeForce and Radeon: what is present condition of opensource and proprietary drivers?

    - by Septagram
    So, it'm about to buy a fresh videocard. Since I do most of my stuff on Linux, I wonder how well will either videocard perform. I recently had a good experience with GeForce 6600 with proprietary drivers and a less than satisfactory experience with Radeon 9000 a while ago. From my experience, proprietary drivers for GeForce used to work very well, while proprietary drivers for Radeon failed miserably. And opensource drivers were sloooow. A few months ago I found out that ATI opened their specifications, and a work on fully featured opensource driver is in progress. I prefer to use free software whenever possible, with the exception of games, so, if that driver is fast enough, feature-rich enough and reliable enough I'd very much like to try it out. I wish I could say that if I can just to basic things, like watch video, heavily use compiz and work with simple applications, this may be enough. I do most of my gaming under Windows anyway. However, there is a good chance I'll go into indie game development in a few months fulltime, so it should also be able to run not-so-very-demanding games (say Nexuiz). But if it isn't, I'd like to know, what to expect from proprietary drivers. Do recent proprietary drivers from NVIDIA and ATI work well? Are ATI drivers just as easy to install on Ubuntu as are NVIDIA drivers?

    Read the article

  • Intel Atom: NVIDIA ION vs. Radeon HD 4330 Graphics

    <b>Phoronix:</b> "Before devoting this hardware to the farm, we ran a few benchmarks comparing the performance of NVIDIA's ION GeForce 9400M graphics processor to the ATI Radeon HD 4330 graphics processor found on the MSI 6667BB-004US and several other Atom-powered devices."

    Read the article

  • How to enable dual monitors with two ATI Radeon 4350 HD graphics cards?

    - by Christophski
    I have bought two ATI Radeon 4350 HD graphics cards and they both work well seperately. But only the first one will output most of the time. If I go to System - Appearance - Monitors it will only detect the monitor on the first graphics card. I have check using hardinfo and the system has definitely detecting both of the graphics cards so I don't know why it isn't detecting the monitor. I am running Maverick 64 bit

    Read the article

  • Moving Function With Arguments To RequireJS

    - by Jazimov
    I'm not only relatively new to JavaScript but also to RequireJS (coming from string C# background). Currently on my web page I have a number of JavaScript functions. Each one takes two arguments. Imagine that they look like this: functionA(x1, y1) { ... } functionB(x2, y2) { ... } functionC(x3, y3) { ... } Currently, these functions exist in a tag on my HTML page and I simply call each as needed. My functions have dependencies on KnockoutJS, jQuery, and some other JS libraries. I currently have Script tags that synchronously load those external .js dependencies. But I want to use RequireJS so that they're loaded asynchronously, as needed. To do this, I plan to move all three functions above into an external .js file (a type of AMD "module") called MyFunctions.js. That file will have a define() call (to RequireJS's define function) that will look something like this: define(["knockout", "jquery", ...], function("ko","jquery", ...) {???} ); My question is how to "wrap" my functionA, functionB, and functionC functions where the ??? is above so that I can use those functions on my page as needed. For example, in the onclick event handler for a button on my HTML page, I would want to call functionA and pass two it two arguments; same for functionB and functionC. I don't fully understand how to expose those functions when they're wrapped in a define that itself is located in an external .js file. I know that define assures that my listed libraries are loaded asynchronously before the callback function is called, but after that's done I don't understand how the web page's script tags would use my functions. Would I need to use require to ensure they're available, such as: require(["myfunctions"],function({not sure what to put here})] I think I understand the basics of RequireJS but I don't understand how to wrap my functions so that they're in external .js files, don't pollute the global namespace, and yet can still be called from the main page so that arguments can be passed to them. I imagine they're are many ways to do this but in reviewing the RequireJS docs and some videos out there, I can't say I understand how... Thank you for any help.

    Read the article

  • How can I use my built-in AMD Radeon 7670m instead of Intel HD 4000 Graphics?

    - by gururaj
    i recently bought a DELL Inspiron 15R 2012m Series Laptop. It comes with a built-in AMD Radeon 7670m graphics card. I installed PES 2012, when I checked the system specification (an option in that PES 2012 game ). I came to know that game runs with Intel HD4000 Graphics and not with my AMD card. I also changed the swithchable graphics and assigned High Performance to PES2012, but the game still runs on Intel HD4000.

    Read the article

  • Graphics Driver problem, ATI Radeon HD 3200, small screen size and slows everything down.

    - by Arvind Jangid
    Regards. I am using a: 2009 Compaq Presario CQ40-415AU Notebook AMD Athlon X2 Dual core Processor 2.1 GHz 1024 MB L2 cache 3GB DDR2 RAM ATI Radeon + HD 3200 Graphics 256 MB, screen is 14 inch widescreen with resolution of 1280*800. I installed Ubuntu 12.04 LTS 32bit on my laptop. It works brilliantly until I installed graphics driver. When I installed the driver, the graphics became slow. Everything slowed down. Even the splash screen resolution changed to something like 640*480. I have liked Ubuntu since 9.10 and for the freedom it provides and its versatility, but graphics problem remains the same. I even installed Ubuntu on a 50 GB partition with 6 GB swap partition. My HDD is 320 GB. Please tell me what is wrong.

    Read the article

  • Why can't I use Unity 3D on a ATI Mobility Radeon HD 4200 Series with FGLRX drivers?

    - by user88257
    With a brand new install of 12.04 on my Dell Inspiron M5030, Unity 3D appears to load everything but the icons in the top left, and I am unable to click on anything. Unity 2D seems to works fine however. I have done nothing except install Synaptic Package manager and follow this guide to install FGLRX Drivers under Settings ? Additional Drivers, the driver shows as installed and functioning. Also after running: /usr/lib/nux/unity_support_test -p, I get this: OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: ATI Mobility Radeon HD 4200 Series OpenGL version string: 3.3.11653 Compatibility Profile Context Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes I am unsure as to what the problem is. I have tried the non-proprietary drivers, I could not get them to work either, but I would be willing to try again.

    Read the article

  • Brightness not working; HP Pavilion Dv6; ATI Radeon HD6770M

    - by Yogesh Dhamija
    I am new to Ubuntu, but so far I am loving it. I was always unable to change my brightness since I installed Ubuntu, but I figured that installing the latest ATI driver for my graphics card would work. I did, but I still can't change the brightness. The slider goes up and down, but the brightness stays the same (on full). I have switchable graphics, an ATI Radeon HD 6770M, and an Intel integrated GPU. Since I am new to Linux, I am not familiar with terminal, so you will have to spell everything out for me, including if you need more information and how to get it. Thanks.

    Read the article

  • How do I get Catalyst 11.10 with ATI Radeon Mobility HD 5470 working on an HP DV7?

    - by S Kumar
    I have a HP DV7 with a HD 5470 512M card. Installation of the Catalyst 11.10 is repeatedly failing on a fresh install of Ubuntu 11.10. Catalyst 11.8 proprietary drivers were working well with Ubuntu 11.04. I have tried installing directly from the .run and generating the distribution specific packages. Nothing has worked. After installation which goes through successfully, the system hangs on reboot after the flashing dots. I have to replace the /etc/X11/xorg.conf to get the X working. I have followed instructions as per the http://wiki.cchtml.com/index.php/Main_Page wiki. Request for support to ATI/AMD gives the response that this model is unsupported on Linux by HP :). Updated 14-Nov I have reverted back to the open source drivers which work well enough for me.

    Read the article

  • How do I install drivers for an AMD Radeon HD 6450?

    - by vanysha
    Hi everyone! I bought new computer. The Graphics card is AMD Radeon HD 6450, on Windows 7 it works fine but I try to install driver on Ubuntu, and it says that "No supported adapters detected". I downloaded the driver from here. After installing "Aditional drivers" says that driver is installed. Also my screen resolution in Ubuntu is not maximum. Can you help me install proper driver, please? Thanks in advance!

    Read the article

  • "Meilleur premier trimestre de tous les temps" pour Intel, AMD dans le vert : retour de la croissan

    Mise à jour du 26/01/10 "Meilleur premier trimestre de tous les temps" pour Intel AMD repasse dans le vert dans un contexte favorable : des résultats qui annoncent le fin de la crise ou simple trompe-l'oeil ? Intel vient d'annoncer un résultat trimestriel record, "le meilleur premier trimestre de tous les temps" (en vo : "best first quarter ever") pour la société. Avec un bénéfice net de 2,4 milliards pour un chiffre d'affaires de plus de 10 milliards, le résultat de ce premier trimestre est en progression de plus de 280 % par rapport à la même période de 2009. Les lancements des modèles Co...

    Read the article

  • Why does Ubuntu Freezes on ASUS K42DY laptop with RADEON HD6470M Graphics Card?

    - by ix3
    Hi,I have an ASUS K42DY laptop with AMD Phenom II x2, 8 GB Ram , 500 GB Hard Drive and has a didicated ATI RADEON HD 6470M Graphics Card and I'm running Ubuntu 12.04 LTS 64bit on it. I have installed GNOME 3 and also followed this Make Ubuntu look like Mac OS X. I have also installed apps from the software center, getdeb & playdeb all of which worked fine. However, I noticed that Ubuntu freezes after inactivity let's say 1-3hrs. I have already set power setting to never standby or hibernate. This is completely annoying because all I can do is log-out via ctrl+alt+del or manually shut down and reboot my laptop. What should I do? By the way, this happens on all shells Unity, Gnome (even with the basic) and Cairo Dock.I set Swap Space at 8GB during installation. Any help will be appreciated. Thanks!

    Read the article

  • Upgraded Ubuntu from 12.04 to 12.10 Ati radeon HD 3450 Catastrophe!

    - by minime
    When I had upgraded everything was ready on the screen om my computer and with my 12.04 ubuntu. When I restarted my system, the graphics card was not detected. I was forced to start the computer in low graphics mode, and eventually I had a pink deskop with only my maps, and no other programs at all. What do I do now? I need to recover the pictures on my system so that I can upload them online. I'd done a graphics card test on the terminal initially, and it showed that the card was compatible with unity 3D. I have an ATI radeon HD 3450 and I was running a 32 bit build of Ubuntu 12.04 initially Right now I have a broken install of Linux, with no working graphics card or desktop to start from, so I'm unsure of how to fix this.

    Read the article

  • Failure to Boot 12.04 on HP AMD Dual Core. Rescue Mode doesn't even come up

    - by L R Bellmore Jr
    I have 12.04 installed on HP 64 bit dual core AMD laptop.. worked great until about 1-2 months ago.. now takes 1/2 hour to 25 hours to boot if it ever does. A minor number of times I get the HP logo with hash lines on screen and it just hangs... When it finally boots 95% it will run until I turn it off days later to see if any of the upgrades fixed the problem. Currently, if it boots, it is random.. .left on over night .. 2 nights ago and came back to a HP logo with Hash Lines horizontal across the screen.. frozen.. rebooted back to black screen.. no HP logo... Most often when it does boot.. no HP logo.. just cursor shows up.. and then I know it will finally load... computer has been made worthless and it is my work computer..HELP PLEASE... Rescue Mode can't be invoked.. computer doesnt respond.. has shown up 3 times in about 100 and when I have tried it... 1 time it resulted in a boot up but then failed in a couple hours.

    Read the article

  • ATI Radeon Drivers works with which linux distribution and version? [closed]

    - by amit.codename13
    I have ATI Mobility Radeon HD 5850 graphics card. Almost every new linux distribution seems to have an issue with it, when i install the drivers. Working without utilizing the graphics card leaves me so unproductive. So i made a plan to use older versions of linux, any distribution suitable as a desktop distribution. The problems that i am facing are, 1) After installing drivers the system boots and hangs, 2) There are unusual lines over the screen 3) After upgrade system doesn't start properly(hangs the usual old way) The kind of answers i am looking for is, distribution X(the newer the version the better) doesn't have the above problem after installing drivers for ATI Mobility Radeon HD 5850 graphics card. UPDATE: The new drivers released by AMD seems to fix all the issues, although they are still beta

    Read the article

  • 12.04.1 no audio through HDMI

    - by JoJo
    having a bit of an issue with getting audio to go through HDMI. Here are the base specs: OS: Ubuntu Desktop 12.04.1 x64 CPU: AMD A10-5800K 3.8G 4M FM2 R Mobo: MSI FM2-A75MA-E35 OS: Ubuntu 12.04.1 LTS Vid Card: (integrated on CPU) AMD Radeon HD 7660D HDMI sound works fine under Win7 (after mobo and vid drivers are installed), so it's not physically broken. Audio through the normal headphone jacks works fine under Ubuntu. Looking at the audio panel, there is no HDMI output at all. aplay -l also reports only: card 0: Generic [HD-Audio Generic], device 0: ALC887-VD Analog [ALC887-VD Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 In additional drivers there are two versions: ATI/AMD PROPRIETARY FGLRX GRAPHICS DRIVER ATI/AMD PROPRIETARY FGLRX GRAPHICS DRIVER (post-release update) The first installs, but problem persists. I do get more resolutions to pick from. Second version does not, reporting it failed installation and to find details at: /var/log/jockey.log Looked at the log, and it's insanely long, if necessary I can get it to you guys. Did more research and some had luck by manually installing the drivers, so tried to give that a shot by following this: https://help.ubuntu.com/community/BinaryDriverHowto/ATI#Manually_installing_Catalyst_12.6 starting at 3.1 Manually installing Catalyst 12.6. I immediately had 2 issues, (1) the AMD website does not provide any drivers for Linux, and (2) the following command did not work: sudo sh amd-driver-installer-12-6-x86.x86_64.run --buildpkg Ubuntu/precise sh: 0: Can't open amd-driver-installer-12-6-x86.x86_64.run Some other posts stated to update "alsa-drivers", but that also did not work as install command for the new version of them did not work. I forget the exact issue, but similar to above, cannot open / cannot find. Any help would be greatly appreciated!

    Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >