Search Results

Search found 1113 results on 45 pages for 'ati'.

Page 20/45 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

  • how to use my radeon 6950 graphics card instead of Intel Graphics 4000

    - by Hung
    I have just recently put my build together, and I have installed my graphics card. The problem is that when i look at my computer's display it is saying that I am using the intel graphics that came with my CPU. Is there a way that i can get the Radeon graphics to run instead? Also, I tried plugging a DVI cable into the graphics card itself and my monitor was unable to receieve the signal. Is there a reason to that?

    Read the article

  • Radeon 68xx, 69xx cards and support for 10-bit color over displayport [closed]

    - by aCuria
    10-bit color, aka "Deep Color" is a scheme where 10 bits are used for each color channel. This makes for a 30 bit RGB implementation. IE: red: 10 bits green: 10 bits blue: 10 bits total: 30 bits For more information, please consult this link http://en.wikipedia.org/wiki/RGB_color_model#Beyond_truecolor:_deep_color Radeon 6000 series cards DO support deep color over HDMI, but HDMI also limits the output resolution to 1920x1200, which is not optimal. I want to know if Deep color is possible over display port with the HD6xxx series graphics cards.

    Read the article

  • How to get AMD Catalyst working on Arch x86_64

    - by gh403
    I've got a Dell Inspiron 15R 7520 with AMD's hybrid "PowerXpress" graphics. The integrated graphics card is (if I understand it correctly) integrated with the i7-3612QM processor, and the discrete graphics card is a "Southern Islands" Radeon HD 7730M. The integrated graphics work perfectly under Arch. However, the discrete graphics don't. I have tried several different methods, and the one that seems to get me the farthest with the least effort is the AUR package catalyst-total-pxp. After installing, rebooting, and issuing the commands # aticonfig --initial # pxp_switch_catalyst amd # X X completely fails to start. The X log can be found here. I don't understand what is failing; potentially, it has something to do with the way my card is hooked up--I think it's muxless, but I really don't know. What is the matter here? Any help would be appreciated.

    Read the article

  • Arch linux - strange behaviour after installing fglrx

    - by kosto
    I have a problem with drivers on arch linux. I installed catalyst through unnoficial catalyst repo as wiki says. pacman -S catalyst catalyst-utils aticonfig --initial After this operation i rebooted the system. KDM loaded succesfully, but when i tried to switch to console (ctrl+alt+1/2/3) i saw only some strange dots, like pixels from the text were splitted on the whole screen. I was able to go back to kdm and enter the account details tho. This gave me a hang just before kde loaded. Here's a video where i'm showing above actions. Anybody knows what caused the problem? I can still chroot to fix some issues. Thanks for interest. http://glothriel.org/arch/arch_problem.ogg same thing on gnome / gdm, that's my second try on installing catalyst on arch. Open drivers suck the battery 2x faster. ___________EDIT_____________ Ok, i found a sollution, so i'm posting if someone else shares my problem. Catalyst does not support KMS, so you need to disable it from grub. You must know where are your /etc and /boot paritions mounted. If you have only one partition for / it's even simplier. Mount / on /mnt mount /dev/sdaX /mnt where X is number of the partition where is your / installed arch-chroot /mnt nano /etc/default/grub and add line: GRUB_CMDLINE_LINUX="nomodeset" save and quit then run (this will delete your windows grub configuration) grub-mkconfig -o /boot/grub/grub.cfg exit umount /mnt reboot

    Read the article

  • Using PhysX on a Radeon GPU?

    - by davr
    Is it possible to get PhysX to run on a Radeon GPU? I've seen various posts on forums claiming someone has found a way, but I was unable to locate any actual guides or software downloads to do it. Note: I don't mean running a GeForce and Radeon GPU in the same machine, I mean having only a Radeon GPU and having it run PhysX.

    Read the article

  • Where Catalyst stores applist for switchable graphics?

    - by noober
    I cannot add an app to the list to manually set it to high performance (Radeon instead of Intel HD). When I browse for an exe, nothing happens, the list is still empty. So, maybe I can edit some .cfg or .ini? UPDATE This is NOT my screenshot... actually I've found it on the Net. The list with iexplore.exe is what I meant. When I click 'Browse' and choose any exe (Portal2.exe, for instance) nothing happens. The list is empty, so I cannot set mode for Portal2.exe.

    Read the article

  • Configuring three monitors with two Radeon X1600/X1650 graphics cards under Ubuntu

    - by cpm
    I have three SyncMaster 932a monitors I want to use with two Radeon X1600/X1650 cards under Linux. I am running X.org X Server 1.6.0, as provided by Ubuntu's Wubi installer. After turning off mirroring, I ended up with this xorg.conf: Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Device" Identifier "Configured Video Device" EndSection The left monitor had a menu bar and a task bar, the center monitor was just desktop, and windows would maximize to the current monitor. The third monitor and second graphics card weren't being used at all. Then I changed my configuration to manually specify each card with their PCI bus: Section "ServerLayout" Identifier "TheLayout" Screen 0 "Radeon Screen 1" Screen 1 "Radeon Screen 2" RightOf "Radeon Screen 1" EndSection Section "Screen" Identifier "Radeon Screen 1" Monitor "Configured Monitor" Device "Radeon the First" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Screen" Identifier "Radeon Screen 2" Monitor "Configured Monitor" Device "Radeon the Second" EndSection Section "Device" Identifier "Radeon the First" Driver "radeon" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Radeon the Second" Driver "radeon" BusID "PCI:2:0:0" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Now both the left and right monitors have task bars and menu bars. Windows cannot be dragged from the first two monitors to the third monitor. Also, maximizing in the left or center window fills both monitors. I also tried adding Option "Xinerama" "true" to the ServerLayout section. X11 wasn't able to start up. I want to: Allow moving windows along all three monitors. Maximizing only fills the current monitor. Either have menu/task bars on only the left monitor or all three monitors How can I make this possible?

    Read the article

  • file corruption on read/write 2.6.32-22-server (happens across many kernels)

    - by Jonathan
    Hi Guys, I'm having an issue where after the server has been up for a period of time (~week/few days) the server will start reading corrupt data. For instance when I run a sha1sum of a file after a fresh boot it remains the same. However after a while I will start to get segfaults and from then on whenever I read this file I get a different sha1sum. I've checked S.M.A.R.T with long tests and I've run an extended memtest86+(12 passes) My lspci is as follows: 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) 00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c) 00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller 00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3300 Graphics 01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller 02:00.0 Ethernet controller: Atheros Communications Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (rev b0) 03:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. Device 3403 I could really use some help on this, do you have any idea what could cause this? It's really frustrating me as it seems to trigger entirely randomly and will not go away until I reboot. I'm also use KVM for virtualization as well as MD for software RAID on this server and the processor is a Phenom II X4 965. I don't believe it's the software raid however as this affects files also hosted on non-raid partitions so I don't know.

    Read the article

  • Radeon 6950 - Garbling of text and graphics in certain Windows only

    - by Greg
    This morning I noticed the text in Gmail (in Firefox 4) looked a little funny (kind of thin, maybe some color fringing). I went to work and thought it might be some ClearType issue or something with the way Direct way that FF4 draws to the screen. When I came back from work (I left the computer on), the problem was much worse - way beyond ClearType nit-picking. The text was barely readable. I opened Chrome and there was no such problem. It seems like only Windows that use hardware acceleration are garbled, and ones that use GDI are not. But, I fired up Dragon Age and didn't notice any problems (I only really looked at the main menu though). Here is a link to a screen shot that illustrates the problem. Notice how the Windows Live Mesh window is completely unreadable, the text in Firefox 4 (left) is pretty bad, while Chrome, the Windows Control Panel, and the task bar are perfectly fine. The fact that the problem shows up in screen shots and that it only happens in certain Windows makes me confident that the problem cannot be with the monitor or DVI cable. I am using the AMD Radeon drivers from 4/27/11. The card I have (MSI Frozr II) came with a slight overclock (810Mhz) out of the box, but it looks like when I'm on the Windows desktop it's not running at full clock (CCC reports 450Mhz). Still, I underclocked it to the stock reference clock (800Mhz) and it made no difference. The idle temperature according to Afterburner is 42-44 Celsius, which seems a tad high but not enough to cause a problem - it's cold to the touch if I open up the machine. What the heck could be causing this? The problem varies in intensity. As we speak I'm in Firefox and things look better than they did earlier - it'll probably get worse again soon. Radeon 6950 (MSI Frozr II), Seasonic X 560, Core i5 2500K at stock clockspeeds, 16GB RAM, Asus P8P67 M Pro

    Read the article

  • Radeon 6950 - Garbling of text and graphics in certain Windows only

    - by Greg
    This morning I noticed the text in Gmail (in Firefox 4) looked a little funny (kind of thin, maybe some color fringing). I went to work and thought it might be some ClearType issue or something with the way Direct way that FF4 draws to the screen. When I came back from work (I left the computer on), the problem was much worse - way beyond ClearType nit-picking. The text was barely readable. I opened Chrome and there was no such problem. It seems like only Windows that use hardware acceleration are garbled, and ones that use GDI are not. But, I fired up Dragon Age and didn't notice any problems (I only really looked at the main menu though). Here is a link to a screen shot that illustrates the problem. Notice how the Windows Live Mesh window is completely unreadable, the text in Firefox 4 (left) is pretty bad, while Chrome, the Windows Control Panel, and the task bar are perfectly fine. The fact that the problem shows up in screen shots and that it only happens in certain Windows makes me confident that the problem cannot be with the monitor or DVI cable. I am using the AMD Radeon drivers from 4/27/11. The card I have (MSI Frozr II) came with a slight overclock (810Mhz) out of the box, but it looks like when I'm on the Windows desktop it's not running at full clock (CCC reports 450Mhz). Still, I underclocked it to the stock reference clock (800Mhz) and it made no difference. The idle temperature according to Afterburner is 42-44 Celsius, which seems a tad high but not enough to cause a problem - it's cold to the touch if I open up the machine. What the heck could be causing this? The problem varies in intensity. As we speak I'm in Firefox and things look better than they did earlier - it'll probably get worse again soon. Radeon 6950 (MSI Frozr II), Seasonic X 560, Core i5 2500K at stock clockspeeds, 16GB RAM, Asus P8P67 M Pro

    Read the article

  • Radeon hd 6570 black screen

    - by Sho
    I got some problem with new graphic card. Every time I use AMD Catalyst drivers on Windows or Linux, screen repeatedly goes black. This usually shows u when i open new cards in a browser, resize a window or run a program. Card runs smoothly on basic drivers but this means low resolution. 1940x1080 is native for my monitor so it causes a lot of problems. I've got a 600W Deus G1, so the power is not the problem. Maybe its a silly question, but would going form a vga cable to hdmi help to improve this situation? If not, can it be caused by slow processor or old mainboard? Im getting kinda confused about this whole thing...

    Read the article

  • Configuring three monitors with two Radeon X1600/X1650 graphics cards under Ubuntu

    - by cpm
    I have three SyncMaster 932a monitors I want to use with two Radeon X1600/X1650 cards under Linux. I am running X.org X Server 1.6.0, as provided by Ubuntu's Wubi installer. After turning off mirroring, I ended up with this xorg.conf: Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Device" Identifier "Configured Video Device" EndSection The left monitor had a menu bar and a task bar, the center monitor was just desktop, and windows would maximize to the current monitor. The third monitor and second graphics card weren't being used at all. Then I changed my configuration to manually specify each card with their PCI bus: Section "ServerLayout" Identifier "TheLayout" Screen 0 "Radeon Screen 1" Screen 1 "Radeon Screen 2" RightOf "Radeon Screen 1" EndSection Section "Screen" Identifier "Radeon Screen 1" Monitor "Configured Monitor" Device "Radeon the First" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Screen" Identifier "Radeon Screen 2" Monitor "Configured Monitor" Device "Radeon the Second" EndSection Section "Device" Identifier "Radeon the First" Driver "radeon" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Radeon the Second" Driver "radeon" BusID "PCI:2:0:0" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Now both the left and right monitors have task bars and menu bars. Windows cannot be dragged from the first two monitors to the third monitor. Also, maximizing in the left or center window fills both monitors. I also tried adding Option "Xinerama" "true" to the ServerLayout section. X11 wasn't able to start up. I want to: Allow moving windows along all three monitors. Maximizing only fills the current monitor. Either have menu/task bars on only the left monitor or all three monitors How can I make this possible?

    Read the article

  • Is integrated graphics card Radeon HD 4200 capable to handle full HD?

    - by develroot
    I enjoy my integrated graphics card Radeon HD 4200 at resolution of 1280x1024 pixels on a 19" inches LG Flatron (5:4 aspect ratio) (playing FIFA 10 at max resolution, max quality). But recently i decided to upgrade my monitor and to get an 24" inches BENQ, 1920x1080, fullHD. Would I experience any problems with that graphics card on a such a big monitor? Usually I don't play games, just movies/music/and of programming, but it would be nice to be able to play some Counter Strike without artifacts.

    Read the article

  • Multiple EyeFinity Display groups

    - by Shinrai
    Is it possible with an EyeFinity enabled card to make multiple display groups at once? I was playing with a FirePro 2460 and while a 4x1 or 2x2 display group works quite nicely, if I make a 2x1 display group and then select one of the other displays to try to make a second 2x1 display group, it disables the first one. Is there any way to circumvent this behavior and set up two separate spans on the same card? Additionally, can you set up distinct display groups if they're on different cards? I will have the opportunity to test several of these cards in one machine very shortly, but I'm curious if anyone has any experience. EDIT: I can confirm that you can make multiple spans on multiple cards (as long as they don't cross cards, obviously) (If the answers are different for FirePro/FireMV cards and Radeon cards, that is helpful and relevant knowledge - I doubt it, though.)

    Read the article

  • HD 6970 Corrupted Video

    - by FailedDev
    considering this rig : i7 2600K 8GB RAM Corsair Vengeance kit 10-9-10-27 @1866 HD 4870 PSU Corsair AX 1200 I recently upgraded to a HD 6970 and I am getting the following - not so nice screens : http://imageshack.us/g/213/1000142z.jpg/ Had anyone any similar trouble at all? I am thinking that the card is DOA but could it also be the Mobo? Since I am in the BIOS I can't think how the mobo could be the problem. HD 4870 works perfect btw regardless of what I throw at it. Any way to prove that the card is OK? Thanks

    Read the article

  • Catalyst Control Center removal

    - by Allan
    I've recently tested a graphics card on a machine that required different drivers than my onboard integrated graphics, so I had catalyst control center installed. After I pulled out the graphics card and went back to using the onboard graphics, I deleted the catalyst center through control panel - programs.. which was fine. But apparently it didn't really remove it. it doesn't show up under programs anymore but when I reboot windows I get an error saying "The catalyst Control Center is not supported by the driver version of your enabled graphics adapter" and its still in the process bar... how do I permanently remove it?

    Read the article

  • Radeon hd 5700 monitor blank until connected HDMI device is started

    - by kaido loor
    Have win7, radeon hd 5700. When both PC monitor and HDMI device (Onkyo 607) are connected to Radeon card, the monitor diplays boot info, "starting windows, etc" but goes blank when "log into windows" should appear. Monitor comes back (w normal screen) if Onkyo and TV are turned on, not before. Multiple monitors is disabled. Really crazy. Any help appreciated. Generally, Onkyo can pick up HDMI signal ok, so at least smth works as intended.

    Read the article

  • Third monitor with AMD cards WITHOUT Eyefinity

    - by Resorath
    I have two AMD Radeon HD 6870 video cards in CrossFireX configuration and I would like to add a third monitor. I understand to use "Eyefinity" you need to use an active mini displayport to DVI adapter. I am not interested in the benefits of "Eyefinity", I just want a third monitor with Windows extended desktop. Is it possible to use either the HDMI head on the first card or the DVI heads from the second card to get a third monitor running without "Eyefinity" and an active adapter?

    Read the article

  • Toshiba Satellite A305-S6861 Display Problems

    - by brock029
    Well this is the first Laptop I have ever worked on with a dedicated video card. So, there is no video going to the laptops monitor or to an external. Ripped it apart found the gpu and now am stuck. I cant decide if its the gpu that has gone out or the motherboard. Any one have any suggestions? If it were a desktop I would throw in one of my spare video cards. Mainly I don't want to order the video card and eat the $50 if its the motherboard.

    Read the article

  • Force Installing a Radeon HD 2100 on Windows 8

    - by Click Ok
    I'm trying force installing a Radeon HD 2100 on Windows 8. I've found that link from AMD with the drivers for Windows7: http://support.amd.com/us/gpudownload/windows/legacy/Pages/legacy-radeonaiw-vista64.aspx I know too that AMD will stop support Radeon HD 400 and older: http://www.techspot.com/news/48321-amd-drops-windows-8-support-for-radeon-hd-4000-and-older.html Now, let's go to the problem. If I try install the 12.6 driver, Windows will stick with the "basic display adapter", and this is bad for 3d games like Minecraft, that runs really slow now compared with the previous Windows7 installation. Forcing install the catalyst driver can help to fix it. So, I follow that steps: Extract the Catalist Driver (C:\AMD\Support\12-6-legacy_vista_win7_64_dd_ccc_whql) Right click the "basic display adapter" on device manager, and "update driver" Search on PC I will choose the driver "With Disk" "C:\AMD\Support\12-6-legacy_vista_win7_64_dd_ccc_whql\Packages\Drivers\Display\W76A_INF" There is a big list of drivers and the nearest driver to HD 2100 is "Radeon HD 2350 Series" My questions: Why isn't "Radeon HD 2100 Series" listed? (or Where is it listed?) In theory it must be listed" The first link above show that "This article applies to the following configuration(s):" (...) "AMD Radeon HD 2000 Series" Am I doing something wrong?

    Read the article

  • DVI monitor detected only on computer startup

    - by kamil
    I've recently connected a new monitor, LG M2252D-PZ, to a rather outdated computer with Windows XP and Radeon 9600. XP has SP3 installed, video drivers are the latest version back from the times the video card was still supported. My problem is that the monitor works fine only as long as I don't turn it off or switch it to a different input. When I turn it back on, it says "no signal". The key to the problem must be the DVI port, to which the new monitor is connected. The previous monitor was connected to the VGA output, and I've tested that the new one also works fine when connected to the analogue port. Apparently, the computer tests for the presence of a monitor on the DVI port only on startup. The question is, how do I change this?

    Read the article

  • Multiple EyeFinity Display groups

    - by Shinrai
    Is it possible with an EyeFinity enabled card to make multiple display groups at once? I was playing with a FirePro 2460 and while a 4x1 or 2x2 display group works quite nicely, if I make a 2x1 display group and then select one of the other displays to try to make a second 2x1 display group, it disables the first one. Is there any way to circumvent this behavior and set up two separate spans on the same card? Additionally, can you set up distinct display groups if they're on different cards? I will have the opportunity to test several of these cards in one machine very shortly, but I'm curious if anyone has any experience. EDIT: I can confirm that you can make multiple spans on multiple cards (as long as they don't cross cards, obviously) (If the answers are different for FirePro/FireMV cards and Radeon cards, that is helpful and relevant knowledge - I doubt it, though.)

    Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >