Search Results

Search found 3802 results on 153 pages for 'chris jacob'.

Page 20/153 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

• Observations From The Corner of a Starbucks

  - by Chris Williams

  I’ve spent the last 3 days sitting in a Starbucks for 4-8 hours at a time. As a result, I’ve observed a lot of interesting behavior and people (most of whom were uninteresting themselves.) One of the things I’ve noticed is that most people don’t sit down. They come in, get their drink and go. The ones that do sit down, stay much longer than it takes to consume their drink. The drink is just an incidental purchase. Certainly not the reason they are here. Most of the people who sit also have laptops. Probably around 75%. Only a few have kids (with them) but the ones that do, have very small kids. Toddlers or younger. Of all the “campers” only a small percentage are wearing headphone, presumably because A) external noise doesn’t bother them or B) they aren’t working on anything important. My buddy George falls into category A, but he grew up in a house full of people. Silence freaks him out far more than noise. My brother and I, on the other hand, were both only children and don’t handle noisy distractions well. He needs it quiet (like a tomb) and I need music. Go figure… I can listen to Britney Spears mixed with Apoptygma Berzerk and Anthrax and crank out 30 pages, but if your toddler is banging his spoon on the table, you’re getting a dirty look… unless I have music, then all is right with the world. Anyway, enough about me. Most of the people who come in as a group are smiling when they enter. Half as many are smiling when they leave. People who come in alone typically aren’t smiling at all. The average age, over the last three days seems to be early 30s… with a couple of senior citizens and teenagers at either end of the curve. The teenagers almost never stay. They have better stuff to do on a nice day. The senior citizens are split nearly evenly between campers and in&outs. Most of the non-solo campers have 1 person with a laptop, while the other reads the paper or a book. Some campers bring multiple laptops… but only really look at one of them. This Starbucks has a drive through. The line is almost never more than 2-3 cars long but apparently a lot of the in&out people would rather come in and stand in line behind (up to) 5 people. The music in here sucks. My musical tastes can best be described as eclectic to bad, but I can still get work done (see above.) I find the music in this particular Starbucks to be discordant and jarring. At this Starbucks, the coffee lingo is apparently something that is meant to occur between employees only. The nice lady at the counter can handle orders in plain English and translate them to Baristaspeak (Baristese?) quite efficiently. If you order in Baristaspeak however, she will look confused and repeat your order back to you in plain English to confirm you actually meant what you said. Then she will say it in Baristaspeak to the lady making your drink. Nobody in this Starbucks (other than the Baristas) makes eye-contact… at least not with me. Of course that may be indicative of a separate issue. ;)

  Read the article

• Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It

  - by Chris Hoffman

  Several times a year, Google releases a new version of Android with new features and performance improvements. Unfortunately, most Android devices in the wild will never get the update. New Android users are often disappointed to discover that their shiny new smartphone won’t get any updates – or worse, that it was running old software from the moment they bought it. Image Credit: Johan Larsson on Flickr Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It How To Delete, Move, or Rename Locked Files in Windows HTG Explains: Why Screen Savers Are No Longer Necessary

  Read the article

• Rails Tutorial Error with gemspec for "rspec" "annotate" "spork" "ansicolor" [closed]

  - by Chris H

  I'm following the Rails Tutorial by Michael Hartl and I'm getting this error when I run. bundle exec rspec spec/requests/static_pages_spec.rb Invalid gemspec in [/Users/chrishuang02/.rvm/gems/ruby-1.9.3-p125@rails3tutorial2ndEd/specifications/annotate-2.4.1.beta1.gemspec]: invalid date format in specification: "2011-09-02 00:00:00.000000000Z" Invalid gemspec in [/Users/chrishuang02/.rvm/gems/ruby-1.9.3-p125@rails3tutorial2ndEd/specifications/guard-rspec-0.5.5.gemspec]: invalid date format in specification: "2011-11-20 00:00:00.000000000Z" Invalid gemspec in [/Users/chrishuang02/.rvm/gems/ruby-1.9.3-p125@rails3tutorial2ndEd/specifications/guard-spork-0.3.2.gemspec]: invalid date format in specification: "2011-11-18 00:00:00.000000000Z" Invalid gemspec in [/Users/chrishuang02/.rvm/gems/ruby-1.9.3-p125@rails3tutorial2ndEd/specifications/spork-0.9.0.gemspec]: invalid date format in specification: "2012-01-22 00:00:00.000000000Z" Invalid gemspec in [/Users/chrishuang02/.rvm/gems/ruby-1.9.3-p125@rails3tutorial2ndEd/specifications/term-ansicolor-1.0.7.gemspec]: invalid date format in specification: "2011-10-13 00:00:00.000000000Z" Invalid gemspec in [/Users/chrishuang02/.rvm/gems/ruby-1.9.3-p125@rails3tutorial2ndEd/specifications/annotate-2.4.1.beta1.gemspec]: invalid date format in specification: "2011-09-02 00:00:00.000000000Z" Invalid gemspec in [/Users/chrishuang02/.rvm/gems/ruby-1.9.3-p125@rails3tutorial2ndEd/specifications/guard-rspec-0.5.5.gemspec]: invalid date format in specification: "2011-11-20 00:00:00.000000000Z" Invalid gemspec in [/Users/chrishuang02/.rvm/gems/ruby-1.9.3-p125@rails3tutorial2ndEd/specifications/guard-spork-0.3.2.gemspec]: invalid date format in specification: "2011-11-18 00:00:00.000000000Z" Invalid gemspec in [/Users/chrishuang02/.rvm/gems/ruby-1.9.3-p125@rails3tutorial2ndEd/specifications/spork-0.9.0.gemspec]: invalid date format in specification: "2012-01-22 00:00:00.000000000Z" Invalid gemspec in [/Users/chrishuang02/.rvm/gems/ruby-1.9.3-p125@rails3tutorial2ndEd/specifications/term-ansicolor-1.0.7.gemspec]: invalid date format in specification: "2011-10-13 00:00:00.000000000Z" Invalid gemspec in [/Users/chrishuang02/.rvm/gems/ruby-1.9.3-p125@rails3tutorial2ndEd/specifications/annotate-2.4.1.beta1.gemspec]: invalid date format in specification: "2011-09-02 00:00:00.000000000Z" Invalid gemspec in [/Users/chrishuang02/.rvm/gems/ruby-1.9.3-p125@rails3tutorial2ndEd/specifications/guard-rspec-0.5.5.gemspec]: invalid date format in specification: "2011-11-20 00:00:00.000000000Z" Invalid gemspec in [/Users/chrishuang02/.rvm/gems/ruby-1.9.3-p125@rails3tutorial2ndEd/specifications/guard-spork-0.3.2.gemspec]: invalid date format in specification: "2011-11-18 00:00:00.000000000Z" Invalid gemspec in [/Users/chrishuang02/.rvm/gems/ruby-1.9.3-p125@rails3tutorial2ndEd/specifications/spork-0.9.0.gemspec]: invalid date format in specification: "2012-01-22 00:00:00.000000000Z" Invalid gemspec in [/Users/chrishuang02/.rvm/gems/ruby-1.9.3-p125@rails3tutorial2ndEd/specifications/term-ansicolor-1.0.7.gemspec]: invalid date format in specification: "2011-10-13 00:00:00.000000000Z" Invalid gemspec in [/Users/chrishuang02/.rvm/gems/ruby-1.9.3-p125@rails3tutorial2ndEd/specifications/annotate-2.4.1.beta1.gemspec]: invalid date format in specification: "2011-09-02 00:00:00.000000000Z" Invalid gemspec in [/Users/chrishuang02/.rvm/gems/ruby-1.9.3-p125@rails3tutorial2ndEd/specifications/guard-rspec-0.5.5.gemspec]: invalid date format in specification: "2011-11-20 00:00:00.000000000Z" Invalid gemspec in [/Users/chrishuang02/.rvm/gems/ruby-1.9.3-p125@rails3tutorial2ndEd/specifications/guard-spork-0.3.2.gemspec]: invalid date format in specification: "2011-11-18 00:00:00.000000000Z" Invalid gemspec in [/Users/chrishuang02/.rvm/gems/ruby-1.9.3-p125@rails3tutorial2ndEd/specifications/spork-0.9.0.gemspec]: invalid date format in specification: "2012-01-22 00:00:00.000000000Z" Invalid gemspec in [/Users/chrishuang02/.rvm/gems/ruby-1.9.3-p125@rails3tutorial2ndEd/specifications/term-ansicolor-1.0.7.gemspec]: invalid date format in specification: "2011-10-13 00:00:00.000000000Z" /Users/chrishuang02/.rvm/gems/ruby-1.9.3-p125@rails3tutorial2ndEd/gems/rspec-core-2.9.0/lib/rspec/core/configuration.rb:746:in `load': cannot load such file -- /Users/chrishuang02/Desktop/rails_projects/first_app/spec/requests/spec/requests/static_pages_spec.rb (LoadError) from /Users/chrishuang02/.rvm/gems/ruby-1.9.3-p125@rails3tutorial2ndEd/gems/rspec-core-2.9.0/lib/rspec/core/configuration.rb:746:in `block in load_spec_files' from /Users/chrishuang02/.rvm/gems/ruby-1.9.3-p125@rails3tutorial2ndEd/gems/rspec-core-2.9.0/lib/rspec/core/configuration.rb:746:in `map' from /Users/chrishuang02/.rvm/gems/ruby-1.9.3-p125@rails3tutorial2ndEd/gems/rspec-core-2.9.0/lib/rspec/core/configuration.rb:746:in `load_spec_files' from /Users/chrishuang02/.rvm/gems/ruby-1.9.3-p125@rails3tutorial2ndEd/gems/rspec-core-2.9.0/lib/rspec/core/command_line.rb:22:in `run' from /Users/chrishuang02/.rvm/gems/ruby-1.9.3-p125@rails3tutorial2ndEd/gems/rspec-core-2.9.0/lib/rspec/core/runner.rb:69:in `run' from /Users/chrishuang02/.rvm/gems/ruby-1.9.3-p125@rails3tutorial2ndEd/gems/rspec-core-2.9.0/lib/rspec/core/runner.rb:10:in `block in autorun'

  Read the article

• Antenna Aligner Part 8: It’s Alive!!!

  - by Chris George

  Finally the day has come, Antenna Aligner v1.0.1 has been uploaded to the AppStore and . “Waiting for review” .. . fast forward 7 days and much checking of emails later WOO HOO! Now what? So I set my facebook page to go live  https://www.facebook.com/AntennaAligner, and started by sending messages to my mates that have iphones! Amazingly a few of them bought it! Similarly some of my colleagues were also kind enough to support me and downloaded it too! Unfortunately the only way I knew they had bought is was from them telling me, as the iTunes connect data is only updated daily at about midday GMT. This is a shame, surely they could provide more granular updates throughout the day? Although I suppose once an app has been out in the wild for a while, daily updates are enough. It would, however, be nice to get a ping when you make your first sale! I would have expected more feedback on my facebook page as well, maybe I’m just expecting too much, or perhaps I’ve configured the page wrong. The new facebook timeline layout is just confusing, and I’m not sure it’s all public, I’ll check that! So please take a look and see what you think! I would love to get some more feedback/reviews/suggestions… Oh and watch out for the Android version coming soon!

  Read the article

• My Tech Ed North America Preview - Content Edition

  - by Chris Gardner

  As I promised in my last post, I feel the need to give you a rundown on all the technical content I am looking forward to checking out at Tech Ed this year. We shall start with the content I know I'll be able to see. This would be some demo stations in the Technical Learning Center. I will DEFINITELY be checking out the Windows Phone Device Bar. I will admit that I am a bit of a phone snob, and I just want to manhandle all that sexy, sexy tech. I am also planning on talking to the Windows Phone team and the Azure team. Year after year, I end up spending more time in either the TLC or taking certification tests than anywhere else. This leads me to the one "Exam Cram" session I hope to attend. There is a session to cram for 70-599: Designing and Developing Windows Phone Applications. I know this seems odd. I'm (sort of) an XNA guru. However, I'm not that up on my Silverlight. I know enough to add Silverlight to an XNA project. Now, let's talk breakout sessions. We always need to keep track of where we're going. I know, I talk about solving problems over forcing buzz words. However, it is important to know what those buzz words before you tell people not to use them. For this, we will look to the "What's New in Visual Studio 11" and "What's New in Microsoft .NET Framework 4.5." Of course, we do talk bad about buzz words around here. For this, I'm really looking forward to "Visual C#/Visual Basic: Becoming a Guru with Existing Features." I still have .NET 2 tricks that are crucial to my internal libraries. In depth knowledge will NEVER trump shortcut libraries. There is a session in ASP.NET for phones and tablets. For those of you that have not tried to use ASP.NET on a mobile device, there is one thing you really need to understand. Mobile devices don't use scroll bars. That's right; the thing with the least screen real estate doesn't use scroll bars. Thus, I am hoping this session will give some good advice in having an ASP.NET site target both mobile and desktop. The last "business only" session "The Accidental Team Foundation Server Admin." T & W Operations is a VERY small business. As such, I am the TFS admin because I'm the developer that is also the SQL Guru. I keep my server up, but it'd be nice to know some really cool tricks for the part time guy. This leads us the the fun sessions. Coding4Fun has a Kinect session. The Twitter followers will remember that I now have a Kinect for Windows sitting on my desk at work. I have gotten pretty handy with the device, but I KNOW I'm missing some good stuff. Finally, we come to Brian Prince's session on "Making Crazy Money with Games and the Cloud." Never mind the fact that we're using Azure at work. Never mind the fact that I'm actually using the cloud in a game. Never mind the fact that the session has the terms "Crazy Money" and "Games" in the title. If you've never seen Brian Prince speak, you're missing out. In the Hands-on-Labs, we are not allowed to make our own schedule. Instead, we're asked what sessions we can't miss, and they try to schedule around those times. This was the one session I said I couldn't miss. This should complete the technical content for the conference. Coming soon, I'll dig into the certifications I hope to attain. Then, we'll talk about the social activities for the week. Here's a preview of that. I am a member of The Krewe...

  Read the article

• What to Do When Windows Won’t Boot

  - by Chris Hoffman

  You turn on your computer one day and Windows refuses to boot — what do you do? “Windows won’t boot” is a common symptom with a variety of causes, so you’ll need to perform some troubleshooting. Modern versions of Windows are better at recovering from this sort of thing. Where Windows XP might have stopped in its tracks when faced with this problem, modern versions of Windows will try to automatically run Startup Repair. First Things First Be sure to think about changes you’ve made recently — did you recently install a new hardware driver, connect a new hardware component to your computer, or open your computer’s case and do something? It’s possible the hardware driver is buggy, the new hardware is incompatible, or that you accidentally unplugged something while working inside your computer. The Computer Won’t Power On At All If your computer won’t power on at all, ensure it’s plugged into a power outlet and that the power connector isn’t loose. If it’s a desktop PC, ensure the power switch on the back of its case — on the power supply — is set to the On position. If it still won’t power on at all, it’s possible you disconnected a power cable inside its case. If you haven’t been messing around inside the case, it’s possible the power supply is dead. In this case, you’ll have to get your computer’s hardware fixed or get a new computer. Be sure to check your computer monitor — if your computer seems to power on but your screen stays black, ensure your monitor is powered on and that the cable connecting it to your computer’s case is plugged in securely at both ends. The Computer Powers On And Says No Bootable Device If your computer is powering on but you get a black screen that says something like “no bootable device” or another sort of “disk error” message, your computer can’t seem to boot from the hard drive that Windows was installed on. Enter your computer’s BIOS or UEFI firmware setup screen and check its boot order setting, ensuring that it’s set to boot from its hard drive. If the hard drive doesn’t appear in the list at all, it’s possible your hard drive has failed and can no longer be booted from. In this case, you may want to insert Windows installation or recovery media and run the Startup Repair operation. This will attempt to make Windows bootable again. For example, if something overwrote your Windows drive’s boot sector, this will repair the boot sector. If the recovery environment won’t load or doesn’t see your hard drive, you likely have a hardware problem. Be sure to check your BIOS or UEFI’s boot order first if the recovery environment won’t load. You can also attempt to manually fix Windows boot loader problems using the fixmbr and fixboot commands. Modern versions of Windows should be able to fix this problem for you with the Startup Repair wizard, so you shouldn’t actually have to run these commands yourself. Windows Freezes or Crashes During Boot If Windows seems to start booting but fails partway through, you may be facing either a software or hardware problem. If it’s a software problem, you may be able to fix it by performing a Startup Repair operation. If you can’t do this from the boot menu, insert a Windows installation disc or recovery disk and use the startup repair tool from there. If this doesn’t help at all, you may want to reinstall Windows or perform a Refresh or Reset on Windows 8. If the computer encounters errors while attempting to perform startup repair or reinstall Windows, or the reinstall process works properly and you encounter the same errors afterwards, you likely have a hardware problem. Windows Starts and Blue Screens or Freezes If Windows crashes or blue-screens on you every time it boots, you may be facing a hardware or software problem. For example, malware or a buggy driver may be loading at boot and causing the crash, or your computer’s hardware may be malfunctioning. To test this, boot your Windows computer in safe mode. In safe mode, Windows won’t load typical hardware drivers or any software that starts automatically at startup. If the computer is stable in safe mode, try uninstalling any recently installed hardware drivers, performing a system restore, and scanning for malware. If you’re lucky, one of these steps may fix your software problem and allow you to boot Windows normally. If your problem isn’t fixed, try reinstalling Windows or performing a Refresh or Reset on Windows 8. This will reset your computer back to its clean, factory-default state. If you’re still experiencing crashes, your computer likely has a hardware problem. Recover Files When Windows Won’t Boot If you have important files that will be lost and want to back them up before reinstalling Windows, you can use a Windows installer disc or Linux live media to recover the files. These run entirely from a CD, DVD, or USB drive and allow you to copy your files to another external media, such as another USB stick or an external hard drive. If you’re incapable of booting a Windows installer disc or Linux live CD, you may need to go into your BIOS or UEFI and change the boot order setting. If even this doesn’t work — or if you can boot from the devices and your computer freezes or you can’t access your hard drive — you likely have a hardware problem. You can try pulling the computer’s hard drive, inserting it into another computer, and recovering your files that way. Following these steps should fix the vast majority of Windows boot issues — at least the ones that are actually fixable. The dark cloud that always hangs over such issues is the possibility that the hard drive or another component in the computer may be failing. Image Credit: Karl-Ludwig G. Poggemann on Flickr, Tzuhsun Hsu on Flickr     

  Read the article

• How to Configure Ubuntu’s Built-In Firewall

  - by Chris Hoffman

  Ubuntu includes its own firewall, known as ufw – short for “uncomplicated firewall.” Ufw is an easier-to-use frontend for the standard Linux iptables commands. You can even control ufw from a graphical interface. Ubuntu’s firewall is designed as an easy way to perform basic firewall tasks without learning iptables. It doesn’t offer all the power of the standard iptables commands, but it’s less complex. HTG Explains: Why Linux Doesn’t Need Defragmenting How to Convert News Feeds to Ebooks with Calibre How To Customize Your Wallpaper with Google Image Searches, RSS Feeds, and More

  Read the article

• New Visual Studio 2012 Project Templates for DotNetNuke

  - by Chris Hammond

  Earlier this month Microsoft put the bits up for Visual Studio 2012 RTM out on MSDN Subscriber downloads, and during the first two weeks of September they will officially be releasing Visual Studio 2012. I started working with VS2012 late in the release candidate cycle, doing some DNN module development using my templates at http://christoctemplate.codeplex.com . These templates work fine in Visual Studio 2012 from my testing, but they still face the same problem that they had in Visual Studio 2008...(read more)

  Read the article

• HTG Explains: Why is Printer Ink So Expensive?

  - by Chris Hoffman

  Printer ink is expensive, more expensive per drop than fine champagne or even human blood. If you haven’t gone paperless, you’ll notice that you’re paying a lot for new ink cartridges — more than seems reasonable. Purchasing the cheapest inkjet printer and buying official ink cartridge replacements is the most expensive thing you can do. There are ways to save money on ink if you must continue to print documents. Cheap Printers, Expensive Ink Ink jet printers are often very cheap. That’s because they’re sold at cost, or even at a loss — the manufacturer either makes no profit from the printer itself or loses money. The manufacturer will make most of its money from the printer cartridges you buy later. Even if the company does make a bit of money from each printer sold, it makes a much larger profit margin on ink. Rather than selling you a printer that may be rather expensive, they want to sell you a cheap printer and make money on an ongoing basis by providing expensive printer ink. It’s been compared to the razor model — sell a razor cheaply and mark up the razor blades. Rather than making a one-time profit on the razor, you’ll make continuing profit as the customer keeps buying razor blade replacements — or ink, in this case. Many printer manufacturers go out of their way to make it difficult for you to use unofficial ink cartridges, building microchips into their official ink cartridges. If you use an unofficial cartridge or refill an official cartridge, the printer may refuse to use it. Lexmark once argued in court that unofficial microchips that enable third-party ink cartridges would violate their copyright and Lexmark has argued that creating an unofficial microchip to bypass this restriction on third-party ink would violate Lexmark’s copyright and be illegal under the US DMCA. Luckily, they lost this argument. What Printer Companies Say Printer companies have put forth their own arguments in the past, attempting to justify the high cost of official ink cartridges and microchips that block any competition. In a Computer World story from 2010, HP argued that they spend a billion dollars each year on “ink research and development.” They point out that printer ink “must be formulated to withstand heating to 300 degrees, vaporization, and being squirted at 30 miles per hour, at a rate of 36,000 drops per second, through a nozzle one third the size of a human hair. After all that it must dry almost instantly on the paper.” They also argue that printers have become more efficient and use less ink to print, while third-party cartridges are less reliable. Companies that use microchips in their ink cartridges argue that only the microchip has the ability to enforce an expiration date, preventing consumers from using old ink cartridges. There’s something to all these arguments, sure — but they don’t seem to justify the sky-high cost of printer ink or the restriction on using third-party or refilled cartridges. Saving Money on Printing Ultimately, the price of something is what people are willing to pay and printer companies have found that most consumers are willing to pay this much for ink cartridge replacements. Try not to fall for it: Don’t buy the cheapest inkjet printer. Consider your needs when buying a printer and do some research. You’ll save more money in the long run. Consider these basic tips to save money on printing: Buy Refilled Cartridges: Refilled cartridges from third parties are generally much cheaper. Printer companies warn us away from these, but they often work very well. Refill Your Own Cartridges: You can get do-it-yourself kits for refilling your own printer ink cartridges, but this can be messy. Your printer may refuse to accept a refilled cartridge if the cartridge contains a microchip. Switch to a Laser Printer: Laser printers use toner, not ink cartridges. If you print a lot of black and white documents, a laser printer can be cheaper. Buy XL Cartridges: If you are buying official printer ink cartridges, spend more money each time. The cheapest ink cartridges won’t contain much ink at all, while larger “XL” ink cartridges will contain much more ink for only a bit more money. It’s often cheaper to buy in bulk. Avoid Printers With Tri-Color Ink Cartridges: If you’re printing color documents, you’ll want to get a printer that uses separate ink cartridges for all its colors. For example, let’s say your printer has a “Color” cartridge that contains blue, green, and red ink. If you print a lot of blue documents and use up all your blue ink, the Color cartridge will refuse to function — now all you can do is throw away your cartridge and buy a new one, even if the green and red ink chambers are full. If you had a printer with separate color cartridges, you’d just have to replace the blue cartridge. If you’ll be buying official ink cartridges, be sure to compare the cost of cartridges when buying a printer. The cheapest printer may be more expensive in the long run. Of course, you’ll save the most money if you stop printing entirely and go paperless, keeping digital copies of your documents instead of paper ones. Image Credit: Cliva Darra on Flickr     

  Read the article

• The Beginner’s Guide To Tabbed Browsing

  - by Chris Hoffman

  Tabs allow you to open multiple web pages in a single browser window without cluttering your desktop. Mastering tabbed browsing can speed up your browsing experience and make multiple web pages easier to manage. Tabbed browsing was once the domain of geeks using alternative browsers, but every popular browser now supports tabbed browsing – even mobile browsers on smartphones and tablets. This article is intended for beginners. If you know someone that doesn’t fully understand tabbed browsing and how awesome it is, feel free to send it to them! How Hackers Can Disguise Malicious Programs With Fake File Extensions Can Dust Actually Damage My Computer? What To Do If You Get a Virus on Your Computer

  Read the article

• Missing features from WebGL and OpenGL ES

  - by Chris Smith

  I've started using WebGL and am pleased with how easy it is to leverage my OpenGL (and by extension OpenGL ES) experience. However, my understanding is as follows: OpenGL ES is a subset of OpenGL WebGL is a subset of OpenGL ES Is this correct for both cases? If so, are there resources for detailing which features are missing? For example, one notable missing feature is glPushMatrix and glPopMatrix. I don't see those in WebGL, but in my searches I cannot find them referenced in OpenGL ES material either.

  Read the article

• 'Photo editor' and 'RAW editor' in Shotwell

  - by Chris Wilson

  The preference menu in Shotwell allows the user to specify both an 'External photo editor' and an 'External RAW editor', but I'm confused as to why two external editors would be required. I'm not a photographer, so this confusion may simply be a result of my ignorance, but I thought RAW images were unprocessed photographs, in which case two editors would be kinda redundant. Am I simply missing one of the finer details of photograph processing?

  Read the article

• Exploring the Excel Services REST API

  - by jamiet

  Over the last few years Analysis Services guru Chris Webb and I have been on something of a crusade to enable better access to data that is locked up in countless Excel workbooks that litter the hard drives of enterprise PCs. The most prominent manifestation of that crusade up to now has been a forum thread that Chris began on Microsoft Answers entitled Excel Web App API? Chris began that thread with: I was wondering whether there was an API for the Excel Web App? Specifically, I was wondering if it was possible (or if it will be possible in the future) to expose data in a spreadsheet in the Excel Web App as an OData feed, in the way that it is possible with Excel Services? Up to recently the last 10 words of that paragraph "in the way that it is possible with Excel Services" had completely washed over me however a comment on my recent blog post Thoughts on ExcelMashup.com (and a rant) by Josh Booker in which Josh said: Excel Services is a service application built for sharepoint 2010 which exposes a REST API for excel documents. We're looking forward to pros like you giving it a try now that Office365 makes sharepoint more easily accessible.  Can't wait for your future blog about using REST API to load data from Excel on Offce 365 in SSIS. made me think that perhaps the Excel Services REST API is something I should be looking into and indeed that is what I have been doing over the past few days. And you know what? I'm rather impressed with some of what Excel Services' REST API has to offer. Unfortunately Excel Services' REST API also has one debilitating aspect that renders this blog post much less useful than it otherwise would be; namely that it is not publicly available from the Excel Web App on SkyDrive. Therefore all I can do in this blog post is show you screenshots of what the REST API provides in Sharepoint rather than linking you directly to those REST resources; that's a great shame because one of the benefits of a REST API is that it is easily and ubiquitously demonstrable from a web browser. Instead I am hosting a workbook on Sharepoint in Office 365 because that does include Excel Services' REST API but, again, all I can do is show you screenshots. N.B. If anyone out there knows how to make Office-365-hosted spreadsheets publicly-accessible (i.e. without requiring a username/password) please do let me know (because knowing which forum on which to ask the question is an exercise in futility). In order to demonstrate Excel Services' REST API I needed some decent data and for that I used the World Tourism Organization Statistics Database and Yearbook - United Nations World Tourism Organization dataset hosted on Azure Datamarket (its free, by the way); this dataset "provides comprehensive information on international tourism worldwide and offers a selection of the latest available statistics on international tourist arrivals, tourism receipts and expenditure" and you can explore the data for yourself here. If you want to play along at home by viewing the data as it exists in Excel then it can be viewed here. Let's dive in.   The root of Excel Services' REST API is the model resource which resides at: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model Note that this is true for every workbook hosted in a Sharepoint document library - each Excel workbook is a RESTful resource. (Update: Mark Stacey on Twitter tells me that "It's turned off by default in onpremise Sharepoint (1 tickbox to turn on though)". Thanks Mark!) The data is provided as an ATOM feed but I have Firefox's feed reading ability turned on so you don't see the underlying XML goo. As you can see there are four top level resources, Ranges, Charts, Tables and PivotTables; exploring one of those resources is where things get interesting. Let's take a look at the Tables Resource: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model/Tables Our workbook contains only one table, called ‘Table1’ (to reiterate, you can explore this table yourself here). Viewing that table via the REST API is pretty easy, we simply append the name of the table onto our previous URI: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model/Tables('Table1') As you can see, that quite simply gives us a representation of the data in that table. What you cannot see from this screenshot is that this is pure HTML that is being served up; that is all well and good but actually we can do more interesting things. If we specify that the data should be returned not as HTML but as: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model/Tables('Table1')?$format=image then that data comes back as a pure image and can be used in any web page where you would ordinarily use images. This is the thing that I really like about Excel Services’ REST API – we can embed an image in any web page but instead of being a copy of the data, that image is actually live – if the underlying data in the workbook were to change then hitting refresh will show a new image. Pretty cool, no? The same is true of any Charts or Pivot Tables in your workbook - those can be embedded as images too and if the underlying data changes, boom, the image in your web page changes too. There is a lot of data in the workbook so the image returned by that previous URI is too large to show here so instead let’s take a look at a different resource, this time a range: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model/Ranges('Data!A1|C15') That URI returns cells A1 to C15 from a worksheet called “Data”: And if we ask for that as an image again: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model/Ranges('Data!A1|C15')?$format=image Were this image resource not behind a username/password then this would be a live image of the data in the workbook as opposed to one that I had to copy and upload elsewhere. Nonetheless I hope this little wrinkle doesn't detract from the inate value of what I am trying to articulate here; that an existing image in a web page can be changed on-the-fly simply by inserting some data into an Excel workbook. I for one think that that is very cool indeed! I think that's enough in the way of demo for now as this shows what is possible using Excel Services' REST API. Of course, not all features work quite how I would like and here is a bulleted list of some of my more negative feedback: The URIs are pig-ugly. Are "_vti_bin" & "ExcelRest.aspx" really necessary as part of the URI? Would this not be better: http://server/Documents/TourismExpenditureInMillionsOfUSD.xlsx/Model/Tables(‘Table1’) That URI provides the necessary addressability and is a lot easier to remember. Discoverability of these resources is not easy, we essentially have to handcrank a URI ourselves. Take the example of embedding a chart into a blog post - would it not be better if I could browse first through the document library to an Excel workbook and THEN through the workbook to the chart/range/table that I am interested in? Call it a wizard if you like. That would be really cool and would, I am sure, promote this feature and cut down on the copy-and-paste disease that the REST API is meant to alleviate. The resources that I demonstrated can be returned as feeds as well as images or HTML simply by changing the format parameter to ?$format=atom however for some inexplicable reason they don't return OData and no-one on the Excel Services team can tell me why (believe me, I have asked). $format is an OData parameter however other useful parameters such as $top and $filter are not supported. It would be nice if they were. Although I haven't demonstrated it here Excel Services' REST API does provide a makeshift way of altering the data by changing the value of specific cells however what it does not allow you to do is add new data into the workbook. Google Docs allows this and was one of the motivating factors for Chris Webb's forum post that I linked to above. None of this works for Excel workbooks hosted on SkyDrive This blog post is as long as it needs to be for a short introduction so I'll stop now. If you want to know more than I recommend checking out a few links: Excel Services REST API documentation on MSDNSo what does REST on Excel Services look like??? by Shahar PrishExcel Services in SharePoint 2010 REST API Syntax by Christian Stich. Any thoughts? Let's hear them in the comments section below! @Jamiet 

  Read the article

• Beginner Geek: How To Change the Boot Order in Your Computer’s BIOS

  - by Chris Hoffman

  The boot order in your computer’s BIOS controls which device it loads the operating system from. Modify your boot order to force your computer to boot from a USB drive, CD or DVD drive, or another hard drive. You may need to change this setting when booting from another device, whether you’re running an operating system from a live USB drive or installing a new operating system from a disc. Note: This process will look different on each computer. The instructions here will guide you through the process, but the screenshots won’t look exactly the same. How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It

  Read the article

• 7 Ways Modern Windows 8 Apps Are Different From Windows Desktop Apps

  - by Chris Hoffman

  Windows 8 apps – originally known as Metro-style apps and now known as Windows 8 style, Modern UI style, or Windows Store style apps, depending on which Microsoft employee you ask — are very different from traditional desktop apps. The Modern interface isn’t just a fresh coat of paint. The new Windows Runtime, or WinRT, application architecture (not to be confused with Windows RT) is very different from the Windows desktop we’re used to. How To Delete, Move, or Rename Locked Files in Windows HTG Explains: Why Screen Savers Are No Longer Necessary 6 Ways Windows 8 Is More Secure Than Windows 7

  Read the article

• How to Connect Your Android to Your PC’s Internet Connection Over USB

  - by Chris Hoffman

  People often “tether” their computers to their smartphones, sending their computer’s network traffic over the device’s cellular data connection. “Reverse tethering” is the opposite – tethering your Android smartphone or tablet to your PC to use your PC’s Internet connection. This method requires a rooted Android and a Windows PC, but it’s very easy to use. If your computer has Wi-Fi, it may be easier to create a Wi-Fi hotspot using a utility like Connectify instead. How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It? HTG Explains: What Is Windows RT and What Does It Mean To Me?

  Read the article

• Best SEO practices for mobile URLs: 301, rel=canonical, or something else?

  - by Chris

  I am developing a site with a mobile version and am trying to figure the appropriate way to manage the URLs for search engines. So far I've considered: Having a mobile site with rel="canonical" links to the regular site. Putting both the mobile site and full site on one URL, and doing user agent sniffing. Another opinion: Spencer: "If you have a mobile site at a separate location or URL, you should 301 redirect each and every mobile page to its corresponding page on your main website. Employ user agent detection so that the mobile optimized version is served up if someone's coming in from a hand-held. - http://developer.practicalecommerce.com/articles/1722-Mobile-site-Development-Best-Practices-for-SEO-Usability Both 2 and 3 make it hard for a user who wants to switch to the full site or mobile site manually, but I'm not sure 1 is the best alternative. What's the best way to write URLs for a mobile site?

  Read the article

• HTG Explains: Are You Using IPv6 Yet? Should You Even Care?

  - by Chris Hoffman

  IPv6 is extremely important for the long-term health of the Internet. But is your Internet service provider providing IPv6 connectivity yet? Does your home network support it? Should you even care if you’re using IPv6 yet? Switching from IPv4 to IPv6 will give the Internet a much larger pool of IP addresses. It should also allow every device to have its own public IP address, rather than be hidden behind a NAT router. IPv6 is Important Long-Term IPv6 is very important for the long-term health of the Internet. There are only about 3.7 billion public IPv4 addresses. This may sound like a lot, but it isn’t even one IP address for each person on the planet. Considering people have more and more Internet-connected devices — everything from light bulbs to thermostats are starting to become network-connected — the lack of IP addresses is already proving to be a serious problem. This may not affect those of us in well-off developed countries just yet, but developing countries are already running out of IPv4 addresses. So, if you work at an Internet service provider, manage Internet-connected servers, or develop software or hardware — yes, you should care about IPv6! You should be deploying it and ensuring your software and hardware works properly with it. It’s important to prepare for the future before the current IPv4 situation becomes completely unworkable. But, if you’re just typical user or even a typical geek with a home Internet connection and a home network, should you really care about your home network just yet? Probably not. What You Need to Use IPv6 To use IPv6, you’ll need three things: An IPv6-Compatible Operating System: Your operating system’s software must be capable of using IPv6. All modern desktop operating systems should be compatible — Windows Vista and newer versions of Windows, as well as modern versions of Mac OS X and Linux. Windows XP doesn’t have IPv6 support installed by default, but you shouldn’t be using Windows XP anymore, anyway. A Router With IPv6 Support: Many — maybe even most — consumer routers in the wild don’t support IPv6. Check your router’s specifications details to see if it supports IPv6 if you’re curious. If you’re going to buy a new router, you’ll probably want to get one with IPv6 support to future-proof yourself. If you don’t have an IPv6-enabled router yet, you don’t need to buy a new one just to get it. An ISP With IPv6 Enabled:  Your Internet service provider must also have IPv6 set up on their end. Even if you have modern software and hardware on your end, your ISP has to provide an IPv6 connection for you to use it. IPv6 is rolling out steadily, but slowly — there’s a good chance your ISP hasn’t enabled it for you yet. How to Tell If You’re Using IPv6 The easiest way to tell if you have IPv6 connectivity is to visit a website like testmyipv6.com. This website allows you to connect to it in different ways — click the links near the top to see if you can connect to the website via different types of connections. If you can’t connect via IPv6, it’s either because your operating system is too old (unlikely), your router doesn’t support IPv6 (very possible), or because your ISP hasn’t enabled it for you yet (very likely). Now What? If you can connect to the test website above via IPv6, congratulations! Everything is working as it should. Your ISP is doing a good job of rolling out IPv6 rather than dragging its feet. There’s a good chance you won’t have IPv6 working properly, however. So what should you do about this — should you head to Amazon and buy a new IPv6-enabled router or switch to an ISP that offers IPv6? Should you use a “tunnel broker,” as the test site recommends, to tunnel into IPv6 via your IPv4 connection? Well, probably not. Typical users shouldn’t have to worry about this yet. Connecting to the Internet via IPv6 shouldn’t be perceptibly faster, for example. It’s important for operating system vendors, hardware companies, and Internet service providers to prepare for the future and get IPv6 working, but you don’t need to worry about this on your home network. IPv6 is all about future-proofing. You shouldn’t be racing to implement this at home yet or worrying about it too much — but, when you need to buy a new router, try to buy one that supports IPv6. Image Credit: Adobe of Chaos on Flickr, hisperati on Flickr, Vox Efx on Flickr     

  Read the article

• Adding a website link to the Member Directory in DotNetNuke 6.2

  - by Chris Hammond

  In case you missed it, DotNetNuke 6.2 was released today, check out Will Morgenweck’s blog post for more details on the release . With some of the new features DotNetNuke 6.2 makes it easier to start to customize the listing of members on your site, and also the Profile display for users on the website. I started implementing DotNetNuke 6.2 on one of my racing websites last night (yeah, so I upgraded before the release happened, a benefit of working for the corp ). In doing so I configured the profile...(read more)

  Read the article

• Windows 8.1 Will Start Encrypting Hard Drives By Default: Everything You Need to Know

  - by Chris Hoffman

  Windows 8.1 will automatically encrypt the storage on modern Windows PCs. This will help protect your files in case someone steals your laptop and tries to get at them, but it has important ramifications for data recovery. Previously, “BitLocker” was available on Professional and Enterprise editions of Windows, while “Device Encryption” was available on Windows RT and Windows Phone. Device encryption is included with all editions of Windows 8.1 — and it’s on by default. When Your Hard Drive Will Be Encrypted Windows 8.1 includes “Pervasive Device Encryption.” This works a bit differently from the standard BitLocker feature that has been included in Professional, Enterprise, and Ultimate editions of Windows for the past few versions. Before Windows 8.1 automatically enables Device Encryption, the following must be true: The Windows device “must support connected standby and meet the Windows Hardware Certification Kit (HCK) requirements for TPM and SecureBoot on ConnectedStandby systems.”  (Source) Older Windows PCs won’t support this feature, while new Windows 8.1 devices you pick up will have this feature enabled by default. When Windows 8.1 installs cleanly and the computer is prepared, device encryption is “initialized” on the system drive and other internal drives. Windows uses a clear key at this point, which is removed later when the recovery key is successfully backed up. The PC’s user must log in with a Microsoft account with administrator privileges or join the PC to a domain. If a Microsoft account is used, a recovery key will be backed up to Microsoft’s servers and encryption will be enabled. If a domain account is used, a recovery key will be backed up to Active Directory Domain Services and encryption will be enabled. If you have an older Windows computer that you’ve upgraded to Windows 8.1, it may not support Device Encryption. If you log in with a local user account, Device Encryption won’t be enabled. If you upgrade your Windows 8 device to Windows 8.1, you’ll need to enable device encryption, as it’s off by default when upgrading. Recovering An Encrypted Hard Drive Device encryption means that a thief can’t just pick up your laptop, insert a Linux live CD or Windows installer disc, and boot the alternate operating system to view your files without knowing your Windows password. It means that no one can just pull the hard drive from your device, connect the hard drive to another computer, and view the files. We’ve previously explained that your Windows password doesn’t actually secure your files. With Windows 8.1, average Windows users will finally be protected with encryption by default. However, there’s a problem — if you forget your password and are unable to log in, you’d also be unable to recover your files. This is likely why encryption is only enabled when a user logs in with a Microsoft account (or connects to a domain). Microsoft holds a recovery key, so you can gain access to your files by going through a recovery process. As long as you’re able to authenticate using your Microsoft account credentials — for example, by receiving an SMS message on the cell phone number connected to your Microsoft account — you’ll be able to recover your encrypted data. With Windows 8.1, it’s more important than ever to configure your Microsoft account’s security settings and recovery methods so you’ll be able to recover your files if you ever get locked out of your Microsoft account. Microsoft does hold the recovery key and would be capable of providing it to law enforcement if it was requested, which is certainly a legitimate concern in the age of PRISM. However, this encryption still provides protection from thieves picking up your hard drive and digging through your personal or business files. If you’re worried about a government or a determined thief who’s capable of gaining access to your Microsoft account, you’ll want to encrypt your hard drive with software that doesn’t upload a copy of your recovery key to the Internet, such as TrueCrypt. How to Disable Device Encryption There should be no real reason to disable device encryption. If nothing else, it’s a useful feature that will hopefully protect sensitive data in the real world where people — and even businesses — don’t enable encryption on their own. As encryption is only enabled on devices with the appropriate hardware and will be enabled by default, Microsoft has hopefully ensured that users won’t see noticeable slow-downs in performance. Encryption adds some overhead, but the overhead can hopefully be handled by dedicated hardware. If you’d like to enable a different encryption solution or just disable encryption entirely, you can control this yourself. To do so, open the PC settings app — swipe in from the right edge of the screen or press Windows Key + C, click the Settings icon, and select Change PC settings. Navigate to PC and devices -> PC info. At the bottom of the PC info pane, you’ll see a Device Encryption section. Select Turn Off if you want to disable device encryption, or select Turn On if you want to enable it — users upgrading from Windows 8 will have to enable it manually in this way. Note that Device Encryption can’t be disabled on Windows RT devices, such as Microsoft’s Surface RT and Surface 2. If you don’t see the Device Encryption section in this window, you’re likely using an older device that doesn’t meet the requirements and thus doesn’t support Device Encryption. For example, our Windows 8.1 virtual machine doesn’t offer Device Encryption configuration options. This is the new normal for Windows PCs, tablets, and devices in general. Where files on typical PCs were once ripe for easy access by thieves, Windows PCs are now encrypted by default and recovery keys are sent to Microsoft’s servers for safe keeping. This last part may be a bit creepy, but it’s easy to imagine average users forgetting their passwords — they’d be very upset if they lost all their files because they had to reset their passwords. It’s also an improvement over Windows PCs being completely unprotected by default.     

  Read the article

• 9Q w/ Michelle Juett

  - by Chris Williams

  Yeah, it's been a while since the last one. But this one is worth the wait. NINE Questions with Michelle Juett

  Read the article

• How to Find Your Computer’s Private & Public IP Addresses

  - by Chris Hoffman

  An IP address (or Internet Protocol address) identifies each networked computer and device on a network. When computers communicate with each other on the Internet or a local network, they send information to each other’s IP addresses. Your computer likely has public and private IP addresses. You’ll need the IP address if you’re hosting server software – the client computers will need your computer’s IP address to connect to it. How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It? HTG Explains: What Is Windows RT and What Does It Mean To Me?

  Read the article

• Couldn't find package - But package is listed in the Packages file

  - by Chris

  (Quoted items are redacted elements) I am using a private repository and an currently trying to repackage some packages 3rd-party packages. I extract the package, make a few modifications (just the control files to fit with company policy - though sometimes file install locations though not in this case) and repackage (and usually rename). Normally I copy the files into a new blank debhelper project and reconstruct the package, however, with a recent one I attempting to convert and some libraries and stuff aren't linking properly (I did copy the postinst, postrm, and preinst files along with all DEDIAN files exactly), the original package worked, but my repackage doesn't, despite providing the same files in the same locations and the same postinst and preinst. So I was attempting to just modify the current packages control files (as the original package is not very good and will not list in our repository and getting a better one from the 3rd party is not an option). I also renamed the package. I did the following: dpkg-deb -R "directory" Modify DEBIAN/control dpkg-deb -b "directory" "package name I want" I did this and put it in our repository. The package shows up in the "Packages" file on the repository and running apt-get update on the client side shows the package in: /var/lib/apt/lists/"server"_"location"_Packages However when I do an apt-get install on the package name (as listed in the Packages file - I did a copy paste) it says it can't find the package. Same with an apt-cache search The Packages listings is as follow (name redacted): Package: "package name" Priority: extra Section: unknown Maintainer: "maintainer" Architecture: any Version: 1.0-lucid5 Depends: libc Filename: "directory"/"package_filename" Size: 2206292 MD5sum: "md5sum" SHA1: "sha key" SHA256: "sha256 key" Description: "description" I am running as sudo (and tried as root as well). I don't understand why apt-get won't see the package. Can you point out any flaws in what I have done, or perhaps some help on getting apt-get to properly see the package. Or perhaps an alternative. I am not even sure if this is a valid way to repackage something. Thanks.

  Read the article

• A simple DotNetNuke article module with C# and VB.NET Source

  - by Chris Hammond

  For the DotNetNuke Connections conference last month I provided an advanced DotNetNuke module development course as a pre-conference training session. That training covered details on how to implement some of the newer features in the DotNetNuke platform within custom modules, mainly ContentItem integration and Taxonomy features. For the course I created a very basic Article module for DotNetNuke, ultimately naming it DNNSimpleArticle. For the course I created both a C# and a VB.NET version of the...(read more)

  Read the article

• Gnome Do not Launching

  - by PyRulez

  When I try running gnome do, I get this. chris@Chris-Ubuntu-Laptop:~$ gnome-do pgrep: invalid user name: -u and it is not writable Trying sudo: chris@Chris-Ubuntu-Laptop:~$ sudo gnome-do [NetworkService] Could not initialize Network Manager dbus: Unable to open the session message bus. [Error 17:54:30.122] [SystemService] Could not initialize dbus: Unable to open the session message bus. (Do:2401): Wnck-CRITICAL **: wnck_set_client_type got called multiple times. (Do:2401): libdo-WARNING **: Binding '<Super>space' failed! [Error 17:54:30.649] [AbstractKeyBindingService] Key "" is already mapped. Tomboy.NotesItemSource "Tomboy Notes" encountered an error in UpdateItems: System.TypeInitializationException: An exception was thrown by the type initializer for Tomboy.TomboyDBus ---> System.Exception: Unable to open the session message bus. ---> System.ArgumentNullException: Argument cannot be null. Parameter name: address at NDesk.DBus.Bus.Open (System.String address) [0x00000] in <filename unknown>:0 at NDesk.DBus.Bus.get_Session () [0x00000] in <filename unknown>:0 --- End of inner exception stack trace --- at NDesk.DBus.Bus.get_Session () [0x00000] in <filename unknown>:0 at Tomboy.TomboyDBus..cctor () [0x00000] in <filename unknown>:0 --- End of inner exception stack trace --- at Tomboy.NotesItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . Firefox.PlacesItemSource "Firefox Places" encountered an error in UpdateItems: System.InvalidCastException: Cannot cast from source type to destination type. at Mono.Data.Sqlite.SqliteDataReader.VerifyType (Int32 i, DbType typ) [0x00000] in <filename unknown>:0 at Mono.Data.Sqlite.SqliteDataReader.GetString (Int32 i) [0x00000] in <filename unknown>:0 at Firefox.PlacesItemSource+<LoadPlaceItems>c__Iterator3.MoveNext () [0x00000] in <filename unknown>:0 at System.Collections.Generic.List`1[Firefox.PlaceItem].AddEnumerable (IEnumerable`1 enumerable) [0x00000] in <filename unknown>:0 at System.Collections.Generic.List`1[Firefox.PlaceItem]..ctor (IEnumerable`1 collection) [0x00000] in <filename unknown>:0 at System.Linq.Enumerable.ToArray[PlaceItem] (IEnumerable`1 source) [0x00000] in <filename unknown>:0 at Firefox.PlacesItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . Do.Universe.Linux.GNOMESpecialLocationsItemSource "GNOME Special Locations" encountered an error in UpdateItems: System.IO.FileNotFoundException: Could not find file "/root/.gtk-bookmarks". File name: '/root/.gtk-bookmarks' at System.IO.FileStream..ctor (System.String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, Boolean anonymous, FileOptions options) [0x00000] in <filename unknown>:0 at System.IO.FileStream..ctor (System.String path, FileMode mode, FileAccess access, FileShare share) [0x00000] in <filename unknown>:0 at (wrapper remoting-invoke-with-check) System.IO.FileStream:.ctor (string,System.IO.FileMode,System.IO.FileAccess,System.IO.FileShare) at System.IO.File.OpenRead (System.String path) [0x00000] in <filename unknown>:0 at System.IO.StreamReader..ctor (System.String path, System.Text.Encoding encoding, Boolean detectEncodingFromByteOrderMarks, Int32 bufferSize) [0x00000] in <filename unknown>:0 at System.IO.StreamReader..ctor (System.String path) [0x00000] in <filename unknown>:0 at (wrapper remoting-invoke-with-check) System.IO.StreamReader:.ctor (string) at Do.Universe.Linux.GNOMESpecialLocationsItemSource+<ReadBookmarkItems>c__Iterator3.MoveNext () [0x00000] in <filename unknown>:0 at Do.Universe.Linux.GNOMESpecialLocationsItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . ^[^\Full thread dump: "<unnamed thread>" tid=0x0xb7570700 this=0x0x56f18 thread handle 0x403 state : not waiting owns () at (wrapper managed-to-native) Mono.Unix.Native.Syscall.read (int,intptr,ulong) <0xffffffff> at Mono.Unix.Native.Syscall.read (int,void*,ulong) <0x00023> at Mono.Unix.UnixStream.Read (byte[],int,int) <0x0008b> at NDesk.DBus.Connection.ReadMessage () <0x0003c> at NDesk.DBus.Connection.Iterate () <0x0001b> at NDesk.DBus.BusG/<Init>c__AnonStorey0.<>m__0 (intptr,NDesk.GLib.IOCondition,intptr) <0x00033> at (wrapper native-to-managed) NDesk.DBus.BusG/<Init>c__AnonStorey0.<>m__0 (intptr,NDesk.GLib.IOCondition,intptr) <0xffffffff> at (wrapper managed-to-native) Gtk.Clipboard.gtk_clipboard_wait_is_text_available (intptr) <0xffffffff> at Gtk.Clipboard.WaitIsTextAvailable () <0x00017> at Do.Universe.SelectedTextItem.UpdateSelection (object,System.EventArgs) <0x00027> at Do.Platform.AbstractApplicationService.OnSummoned () <0x00025> at Do.Platform.ApplicationService.<ApplicationService>m__31 (object,System.EventArgs) <0x00013> at Do.Core.Controller.OnSummoned () <0x00025> at Do.Core.Controller.Summon () <0x00027> at Do.Do.Main (string[]) <0x001eb> at (wrapper runtime-invoke) <Module>.runtime_invoke_void_object (object,intptr,intptr,intptr) <0xffffffff> "<unnamed thread>" tid=0x0xb2c81b40 this=0x0x194150 thread handle 0x412 state : interrupted state owns () at (wrapper managed-to-native) System.IO.InotifyWatcher.ReadFromFD (intptr,byte[],intptr) <0xffffffff> at System.IO.InotifyWatcher.Monitor () <0x0005f> at System.Threading.Thread.StartInternal () <0x00057> at (wrapper runtime-invoke) object.runtime_invoke_void__this__ (object,intptr,intptr,intptr) <0xffffffff> "Universe Update Dispatcher" tid=0x0xb29ffb40 this=0x0x569d8 thread handle 0x41b state : interrupted state owns () at (wrapper managed-to-native) System.Threading.WaitHandle.WaitOne_internal (System.Threading.WaitHandle,intptr,int,bool) <0xffffffff> at System.Threading.WaitHandle.WaitOne (System.TimeSpan,bool) <0x00133> at System.Threading.WaitHandle.WaitOne (System.TimeSpan) <0x00022> at Do.Core.UniverseManager.UniverseUpdateLoop () <0x0007a> at System.Threading.Thread.StartInternal () <0x00057> at (wrapper runtime-invoke) object.runtime_invoke_void__this__ (object,intptr,intptr,intptr) <0xffffffff> Tomboy.NotesItemSource "Tomboy Notes" encountered an error in UpdateItems: System.TypeInitializationException: An exception was thrown by the type initializer for Tomboy.TomboyDBus ---> System.Exception: Unable to open the session message bus. ---> System.ArgumentNullException: Argument cannot be null. Parameter name: address at NDesk.DBus.Bus.Open (System.String address) [0x00000] in <filename unknown>:0 at NDesk.DBus.Bus.get_Session () [0x00000] in <filename unknown>:0 --- End of inner exception stack trace --- at NDesk.DBus.Bus.get_Session () [0x00000] in <filename unknown>:0 at Tomboy.TomboyDBus..cctor () [0x00000] in <filename unknown>:0 --- End of inner exception stack trace --- at Tomboy.NotesItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . Firefox.PlacesItemSource "Firefox Places" encountered an error in UpdateItems: System.InvalidCastException: Cannot cast from source type to destination type. at Mono.Data.Sqlite.SqliteDataReader.VerifyType (Int32 i, DbType typ) [0x00000] in <filename unknown>:0 at Mono.Data.Sqlite.SqliteDataReader.GetString (Int32 i) [0x00000] in <filename unknown>:0 at Firefox.PlacesItemSource+<LoadPlaceItems>c__Iterator3.MoveNext () [0x00000] in <filename unknown>:0 at System.Collections.Generic.List`1[Firefox.PlaceItem].AddEnumerable (IEnumerable`1 enumerable) [0x00000] in <filename unknown>:0 at System.Collections.Generic.List`1[Firefox.PlaceItem]..ctor (IEnumerable`1 collection) [0x00000] in <filename unknown>:0 at System.Linq.Enumerable.ToArray[PlaceItem] (IEnumerable`1 source) [0x00000] in <filename unknown>:0 at Firefox.PlacesItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . Do.Universe.Linux.GNOMESpecialLocationsItemSource "GNOME Special Locations" encountered an error in UpdateItems: System.IO.FileNotFoundException: Could not find file "/root/.gtk-bookmarks". File name: '/root/.gtk-bookmarks' at System.IO.FileStream..ctor (System.String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, Boolean anonymous, FileOptions options) [0x00000] in <filename unknown>:0 at System.IO.FileStream..ctor (System.String path, FileMode mode, FileAccess access, FileShare share) [0x00000] in <filename unknown>:0 at (wrapper remoting-invoke-with-check) System.IO.FileStream:.ctor (string,System.IO.FileMode,System.IO.FileAccess,System.IO.FileShare) at System.IO.File.OpenRead (System.String path) [0x00000] in <filename unknown>:0 at System.IO.StreamReader..ctor (System.String path, System.Text.Encoding encoding, Boolean detectEncodingFromByteOrderMarks, Int32 bufferSize) [0x00000] in <filename unknown>:0 at System.IO.StreamReader..ctor (System.String path) [0x00000] in <filename unknown>:0 at (wrapper remoting-invoke-with-check) System.IO.StreamReader:.ctor (string) at Do.Universe.Linux.GNOMESpecialLocationsItemSource+<ReadBookmarkItems>c__Iterator3.MoveNext () [0x00000] in <filename unknown>:0 at Do.Universe.Linux.GNOMESpecialLocationsItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . It stops when I try my key combination, ctrl-alt-. It does not pop up though.

  Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >