Search Results

Search found 1557 results on 63 pages for 'daniel benedykt'.

Page 20/63 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

• esxi change MKS port

  - by Daniel Powell

  I need to connect to my home esxi box over the web however I cannot use the default port 902 for the console viewer due to firewall restrictions. Is there a way to change this port somewhere even if i can just do some nat and redirect any other port to that port? I've had a look around and when I try to connect to the esxi server in vSphere client I cant find anywhere I can specify the port. I know this is not the recommended way to do this but its a testing server and security is not an absolute must on this box. I also cannot setup a vpn to this box.

  Read the article

• What is the best software to help record the auido of MagicJack?

  - by Daniel

  What is the best software to help record the auido of MagicJack? I would love to record audio off of conference calls. This question is for both Windows and Macs.

  Read the article

• Migrating SBS 2003 to 2011, and hangs when migrating Public Folders

  - by Daniel P

  I've been following the migration guide at http://www.it-book.co.uk/1651/migration-from-sbs-2003-to-sbs-2011-3. The option "Migrate Exchange mailbox and settings" links me to http://technet.microsoft.com/en-us/library/gg563803.aspx When I get to the stage of right-clicking "Move All Replicas", it instantly hangs. I can't see anything specifically in the event viewer at the time this happens. Is this a case of waiting, or is there something more going on here?

  Read the article

• Window Servers 2003 Security After Support Lifecycle

  - by Daniel Fukuda

  Hello, I wanted to ask if let's say that Microsoft has stopped supporting Windows Server 2003 now so there is no any security updates and I use that system for Domain Controller (Windows XP/7 Professional Clients) and File Server only + I'm using ESET NOD23 AntiVirus. Will my system be secure? I'm asking because I don't surf internet on that system nor I will install/open any programs/documents and that server is connected to router without any open ports. "On July 14, 2015, all Windows 2003 support, including security updates and security-related hotfixes, will be terminated."

  Read the article

• b Is it bad to have the Reverse DNS for two IPs point to the same domain name?

  - by Daniel Vandersluis

  I am in the process of setting up a new server for my web application (the site will be moved, it is not for load balancing or the like), which has a different IP address from my existing server. My current server has a reverse DNS PTR record set up pointing its IP to mydomain.com. Is it bad to set up a reverse DNS PTR record for the new IP pointing to mydomain.com as well? Or should I wait until I do my migration to set up the record? Update: I forgot to mention, the A record for the mydomain.com points to the old server's IP address, not the new one, if it matters.

  Read the article

• HP DX5150, MS-7050 v. 1.3 Motherboard front panel pin connectors

  - by Daniel

  I recently purchased and installed a MS-7050 v. 1.3 motherboard into a regular non-HP case and thus the front panel connectors are different than the original OEM connectors which are all bundled together. The HP support website does not have this information available and someone from HP indicated in response to a support forum question that this information is not available. What is the motherboard pin schematic for the front panel i/o connectors (power, reset, hdd led, and power led)?

  Read the article

• Using a flash drive to speed up conventional disks (on linux)

  - by Daniel

  Hi! Is there a possibility to use a flash drive as a speed up for conventional hard disks? I got the idea to redirect all read ops to the flash drive if the data is already stored there, and to read from the conventional disks if the data is not found there (and during idle time the freshly accessed data from the conventional disk is stored on the flash disk). Is this already possible with linux standard tools?

  Read the article

• filesystem compatible with freenas and windows

  - by Daniel

  Hi all, I'm planning on using FreeNAS (was considering openfiler but freenas seems simpler) for my home NAS box running off ESXI. I have managed to get local sata drives to mount in ESXI (http://serverfault.com/questions/216902/esxi-add-datastore-without-partitioning). I've had one of the drives fail on my before and I was able to retrieve most of the data off it using windows tools (I'm not much of a linux guy I know enough to be dangerous!). If I go the freenas route in the event that something goes bad what would be the best file system to use so that I could pop the drive out of the freenas box (vm) and put it in another pc running windows so I could try and run various recovery tools to get the data back. All in all its not a major problem if I lose the data just would be a bit annoying, so I'm not looking for suggestions around backing up etc. I was considering using NTFS that the drives are already formatted as but it appears that while freenas does support NTFS that its a bit buggy and not 100% reliable, anyone know if this is still true? Read that on a forum somewhere.

  Read the article

• Remembering window's location and desktops on Mac OS X

  - by Daniel Cukier

  When I use my Mac, I like have a standard windows organization to do my Work: I put 4 consoles opened side by side on console 1 I put Safari in other Mail and iCal in another TextMate on other etc And depending on the work I do, I'd like to have different window configuration. And when I have a external monitor connected, I need another configuration. Is there any tool to make this? What is the best way to do it?

  Read the article

• Add and remove letterhead in Word document

  - by Daniel Wolf

  Our company has letterheaded paper (pre-printed paper with our logo on it). Whenever we send something out by mail, we print it on that paper. However, when we send the same document via email, we convert it to a PDF file. Now the problem is: when converting a Word document to PDF, it should contain the letterhead. When printing the same document on paper, it should not (or else the letterhead would be printed twice). Currently, we are using two different Word document templates - one with letterhead, one without. So whenever we want to add or remove the letterhead, we have to create a new document with the other template and copy and paste everything over. Nasty solution. What I'm looking for is some simple way to switch the letterhead on and off. What I've tried so far: Switching the template: There does not seem to be a simple way to switch the template for an existing document. Using a picture watermark: Our letterhead goes all the way to the border of the page. (No printer supports this, of course, but it is fine for export to PDF.) Apparently depending on the current default printer, Word will not allow a borderless watermark, instead shifting the image around. Using the page header: When editing the page header, I can insert pictures at arbitrary positions, which is great. However, I could not find a way (short of macros) to enable/disable just the pictures in the header. (The text should remain there.)

  Read the article

• Create private key with CSR

  - by Daniel Schlieckmann

  I have a CSR file (as a text file) and the corresponding P7B certificate. My problem is that I have to create a P12 file on a machine where I do not have created the CSR. I have created the CSR in Firefox Key Manager. Before, I imported the P7B file into certificate store in msc, then exported a CER-file, imported it in Key Manager and then exported the P12 file. This doesn't work anymore because I have another machine now. If I try to import the CER file created by msc, Key Manager says that there is no private key. Is there a possibility to create a private key?

  Read the article

• Connect ps/2->usb keyboard to linux?

  - by Daniel

  I have a lovely ancient ergonomic keyboard (no name SK - 6000) connected via a DIN-ps/2 adapter to a ps/2-usb adapter to my docking station. After Grub it stops working. It takes either suspending and waking up or replugging it while Linux is running to get it to work. No extra kernel modules get loaded for this. When it works and I restart without power off, it will work immediately. Even when it does not work, it is visible (lsusb device number varies but output is identical whether working or not): $ lsusb -v -s 001:006 Bus 001 Device 006: ID 0a81:0205 Chesen Electronics Corp. PS/2 Keyboard+Mouse Adapter Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0a81 Chesen Electronics Corp. idProduct 0x0205 PS/2 Keyboard+Mouse Adapter bcdDevice 0.10 iManufacturer 1 CHESEN iProduct 2 PS2 to USB Converter iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 59 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 2 PS2 to USB Converter bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 1 Keyboard iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 64 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 148 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0000 (Bus Powered) $ ll -R /sys/bus/hid/drivers/ /sys/bus/hid/drivers/: total 0 drwxr-xr-x 2 root root 0 Jul 8 2012 generic-usb/ /sys/bus/hid/drivers/generic-usb: total 0 lrwxrwxrwx 1 root root 0 Jul 7 23:33 0003:046D:C03D.0003 -> ../../../../devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/0003:046D:C03D.0003/ lrwxrwxrwx 1 root root 0 Jul 7 23:33 0003:0A81:0205.0001 -> ../../../../devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/ lrwxrwxrwx 1 root root 0 Jul 7 23:33 0003:0A81:0205.0002 -> ../../../../devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.1/0003:0A81:0205.0002/ --w------- 1 root root 4096 Jul 7 23:32 bind lrwxrwxrwx 1 root root 0 Jul 7 23:33 module -> ../../../../module/usbhid/ --w------- 1 root root 4096 Jul 7 23:32 new_id --w------- 1 root root 4096 Jul 8 2012 uevent --w------- 1 root root 4096 Jul 7 23:32 unbind When replugging, dmesg shows this (which except for the 1st line and different input numbers already came at boot time): [ 1583.295385] usb 1-1.2.1: new low-speed USB device number 6 using ehci_hcd [ 1583.446514] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/input/input17 [ 1583.446817] generic-usb 0003:0A81:0205.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1a.0-1.2.1/input0 [ 1583.454764] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.1/input/input18 [ 1583.455534] generic-usb 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1a.0-1.2.1/input1 [ 1583.455578] usbcore: registered new interface driver usbhid [ 1583.455584] usbhid: USB HID core driver So I tried $ sudo udevadm test /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0 run_command: calling: test adm_test: version 175 This program is for debugging only, it does not run any program, specified by a RUN key. It may show incorrect results, because some values may be different, or not available at a simulation run. parse_file: reading '/lib/udev/rules.d/40-crda.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-fuse.rules' as rules file ... parse_file: reading '/lib/udev/rules.d/40-usb-media-players.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-usb_modeswitch.rules' as rules file ... parse_file: reading '/lib/udev/rules.d/42-qemu-usb.rules' as rules file ... parse_file: reading '/lib/udev/rules.d/69-cd-sensors.rules' as rules file add_rule: IMPORT found builtin 'usb_id', replacing /lib/udev/rules.d/69-cd-sensors.rules:76 ... parse_file: reading '/lib/udev/rules.d/77-mm-usb-device-blacklist.rules' as rules file ... parse_file: reading '/lib/udev/rules.d/85-usbmuxd.rules' as rules file ... parse_file: reading '/lib/udev/rules.d/95-upower-hid.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-wup.rules' as rules file parse_file: reading '/lib/udev/rules.d/97-bluetooth-hid2hci.rules' as rules file udev_rules_new: rules use 271500 bytes tokens (22625 * 12 bytes), 44331 bytes buffer udev_rules_new: temporary index used 76320 bytes (3816 * 20 bytes) udev_device_new_from_syspath: device 0x7f78a5e4d2d0 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0' udev_device_new_from_syspath: device 0x7f78a5e5f820 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0' udev_device_read_db: device 0x7f78a5e5f820 filled with db file data udev_device_new_from_syspath: device 0x7f78a5e60270 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001' udev_device_new_from_syspath: device 0x7f78a5e609c0 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0' udev_device_new_from_syspath: device 0x7f78a5e61160 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1' udev_device_new_from_syspath: device 0x7f78a5e61960 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2' udev_device_new_from_syspath: device 0x7f78a5e62150 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1' udev_device_new_from_syspath: device 0x7f78a5e62940 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1' udev_device_new_from_syspath: device 0x7f78a5e630f0 has devpath '/devices/pci0000:00/0000:00:1a.0' udev_device_new_from_syspath: device 0x7f78a5e638a0 has devpath '/devices/pci0000:00' udev_event_execute_rules: no node name set, will use kernel supplied name 'hidraw0' udev_node_add: creating device node '/dev/hidraw0', devnum=251:0, mode=0600, uid=0, gid=0 udev_node_mknod: preserve file '/dev/hidraw0', because it has correct dev_t udev_node_mknod: preserve permissions /dev/hidraw0, 020600, uid=0, gid=0 node_symlink: preserve already existing symlink '/dev/char/251:0' to '../hidraw0' udev_device_update_db: created empty file '/run/udev/data/c251:0' for '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0' ACTION=add DEVNAME=/dev/hidraw0 DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0 MAJOR=251 MINOR=0 SUBSYSTEM=hidraw UDEV_LOG=6 USEC_INITIALIZED=969079051 The later lines sound like it's already there. And none of these awakes the keyboard: $ sudo udevadm trigger --verbose --sysname-match=usb* /sys/devices/pci0000:00/0000:00:1a.0/usb1 /sys/devices/pci0000:00/0000:00:1a.0/usbmon/usbmon1 /sys/devices/pci0000:00/0000:00:1d.0/usb2 /sys/devices/pci0000:00/0000:00:1d.0/usbmon/usbmon2 /sys/devices/virtual/usbmon/usbmon0 $ sudo udevadm trigger --verbose --sysname-match=hidraw0 /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0 $ sudo udevadm trigger I also tried this to no avail: # echo -n 0003:0A81:0205.0001 > /sys/bus/hid/drivers/generic-usb/bind ksh: echo: write to 1 failed [No such device] # echo -n 0003:0A81:0205.0001 > /sys/bus/hid/drivers/generic-usb/unbind # echo -n 0003:0A81:0205.0001 > /sys/bus/hid/drivers/generic-usb/bind # echo usb1 >/sys/bus/usb/drivers/usb/unbind # echo usb1 >/sys/bus/usb/drivers/usb/bind What else should I try to get the same result as replugging or suspending, by just issuing a command?

  Read the article

• Hardware upgrade: Windows 7 bluescreens, Vista loads

  - by Daniel Schaffer

  I just did a fairly significant hardware upgrade while keeping my hard disks. The old system was a dell Optiplex 745 with an Intel Core 2 duo, LGA 775. The new system is custom built, Intel i5 750. I know you're supposed to do a clean install with a hardware upgrade like this, but I'd had success in the past doing the stealth hardware upgrade like this, so I figured I'd give it a shot. Windows 7 Ultimate 64 bit gets through the loading screen and immediately blue screens and reboots. Windows Vista Home Premium 32-bit, which I have on an old hard drive from an AMD box (!!) loads up fine. I ran through the windows memory checker just to be sure, and my memory is fine. So, is the BSOD the result of some sort of protection mechanism specific to Windows 7? Is there any hope of salvaging that install?

  Read the article

• Yahoo Mail Does Not Have https

  - by Daniel

  Why is yahoo mail behind in security, they don't support https yet. Gmail and many others do, I'm shocked that yahoo still doesn't have https? Why is this? What is the logic behind not supporting https in their mail client?

  Read the article

• Wireless disconnects at random after upgrade to Ubuntu 10.4

  - by Daniel Elessedil Kjeserud

  After upgrading my home server from Ubuntu 8.10 to 10.4 my wireless seemingly drops out, even though my IRC client keeps it's connection to the servers, so it looks like the machine just stops taking wireless requests. A ping will give a me this Request timeout for icmp_seq 27 ping: sendto: Host is down After a while the machine just starts responding again, without any interaction from me. When the machine comes back, this is what dmesg gives me [ 18.296288] wlan0: direct probe to AP 00:1b:63:22:a4:5f (try 1) [ 18.296350] wlan0: deauthenticating from 00:1b:63:22:a4:5f by local choice (reason=3) [ 18.296440] wlan0: direct probe to AP 00:1b:63:22:a4:5f (try 1) [ 18.298697] wlan0: direct probe responded [ 18.298706] wlan0: authenticate with AP 00:1b:63:22:a4:5f (try 1) [ 18.306836] wlan0: authenticated [ 18.306886] wlan0: associate with AP 00:1b:63:22:a4:5f (try 1) [ 18.309396] wlan0: RX AssocResp from 00:1b:63:22:a4:5f (capab=0x411 status=0 aid=2) [ 18.309402] wlan0: associated [ 18.310187] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 18.447742] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 18.447748] apm: overridden by ACPI. [ 19.163282] padlock: VIA PadLock not detected. [ 28.352022] wlan0: no IPv6 routers present kjes@brin:~$ lspci 02:07.0 Network controller: RaLink RT2561/RT61 rev B 802.11g It's on a wireless network with WPA2, the machine worked without any problems on the same wireless network since Ubuntu 8.10 was the most resent version, and there have been no changes to my network recently. Even though the server drops out, everything else on the network keeps working like normal.

  Read the article

• Forwarding HTTP Request with Direct Server Return

  - by Daniel Crabtree

  I have servers spread across several data centers, each storing different files. I want users to be able to access the files on all servers through a single domain and have the individual servers return the files directly to the users. The following shows a simple example: 1) The user's browser requests http://www.example.com/files/file1.zip 2) Request goes to server A, based on the DNS A record for example.com. 3) Server A analyzes the request and works out that /files/file1.zip is stored on server B. 4) Server A forwards the request to server B. 5) Server B returns file1.zip directly to the user without going through server A. Note: steps 4 and 5 must be transparent to the user and cannot involve sending a redirect to the user as that would violate the requirement of a single domain. From my research, what I want to achieve is called "Direct Server Return" and it is a common setup for load balancing. It is also sometimes called a half reverse proxy. For step 4, it sounds like I need to do MAC Address Translation and then pass the request back onto the network and for servers outside the network of server A tunneling will be required. For step 5, I simply need to configure server B, as per the real servers in a load balancing setup. Namely, server B should have server A's IP address on the loopback interface and it should not answer any ARP requests for that IP address. My problem is how to actually achieve step 4? I have found plenty of hardware and software that can do this for simple load balancing at layer 4, but these solutions fall short and cannot handle the kind of custom routing I require. It seems like I will need to roll my own solution. Ideally, I would like to do the routing / forwarding at the web server level, i.e. in PHP or C# / ASP.net. However, I am open to doing it at a lower level such as Apache or IIS, or at an even lower level, i.e. a custom proxy service in front of everything. Thanks.

  Read the article

• What is the best way to import and/or sync Gmail-Google contacts with Skype contacts?

  - by Daniel

  What is the best way to import and/or sync Gmail-Google contacts with Skype contacts? Is this even possible?

  Read the article

• How to install apt-get on a busybox embedded system?

  - by Daniel YC Lin

  My embedded system is for sh4 CPU. The debian distribution may get on http://www.si-linux.co.jp/pub/debian-sh/lenny-sh4/ I get the apt*.deb and extract the data.tar.gz. After setup the /etc/apt/sources.list, I could do 'apt-get update'. But it missing dependency when I try to run 'apt-get install ntpdate'. Is there any method to let apt-get ignore some base packages? Because those package is build by my original embedded system.(eg. busybox).

  Read the article

• How should I set up my Hyper-V server and network topology?

  - by Daniel Waechter

  This is my first time setting up either Hyper-V or Windows 2008, so please bear with me. I am setting up a pretty decent server running Windows Server 2008 R2 to be a remote (colocated) Hyper-V host. It will be hosting Linux and Windows VMs, initially for developers to use but eventually also to do some web hosting and other tasks. Currently I have two VMs, one Windows and one Ubuntu Linux, running pretty well, and I plan to clone them for future use. Right now I'm considering the best ways to configure developer and administrator access to the server once it is moved into the colocation facility, and I'm seeking advice on that. My thought is to set up a VPN for access to certain features of the VMs on the server, but I have a few different options for going about this: Connect the server to an existing hardware firewall (an old-ish Netscreen 5-GT) that can create a VPN and map external IPs to the VMs, which will have their own IPs exposed through the virtual interface. One problem with this choice is that I'm the only one trained on the Netscreen, and its interface is a bit baroque, so others may have difficulty maintaining it. Advantage is that I already know how to do it, and I know it will do what I need. Connect the server directly to the network and configure the Windows 2008 firewall to restrict access to the VMs and set up a VPN. I haven't done this before, so it will have a learning curve, but I'm willing to learn if this option is better long-term than the Netscreen. Another advantage is that I won't have to train anyone on the Netscreen interface. Still, I'm not certain if the capabilities of the Windows software firewall as far as creating VPNs, setting up rules for external access to certain ports on the IPs of Hyper-V servers, etc. Will it be sufficient for my needs and easy enough to set up / maintain? Anything else? What are the limitations of my approaches? What are the best practices / what has worked well for you? Remember that I need to set up developer access as well as consumer access to some services. Is a VPN even the right choice?

  Read the article

• Sendmail SMART_HOST not working

  - by daniel

  Hello, I've defined SMART_HOST to be a specific server, lets call it foo.bar.com. However, when I send a test mail using 'sendmail -t', sendmail tries to use mx.bar.com, which subsequently rejects my mail. I've verified that foo.bar.com works and that mx.bar.com does not work (yay telnet). I've recompiled sendmail.mc vi make, make -C and m4. I've verified the DS entry in sendmail.cf. I've restarted sendmail correctly. I'm not sure how to proceed at this point. Any ideas? Here is my SMART_HOST line: define(SMART_HOST',foo.bar.com')dnl ...and here is the result of a test mail. It never tries to use foo.bar.com, instead it uses mx.bar.com. $ echo subject: test; echo | sendmail -Am -v -flocaluser -- [email protected] subject: test [email protected]... Connecting to mx.bar.com via relay... 220 mx.bar.com ESMTP >>> EHLO myhost.bar.com 250-mx.bar.com 250-8BITMIME 250 SIZE 52428800 >>> MAIL From:<[email protected]> SIZE=1 250 sender <[email protected]> ok >>> RCPT To:<[email protected]> 550 #5.1.0 Address rejected. >>> RSET 250 reset localuser... Connecting to local... localuser... Sent Closing connection to mx.bar.com. >>> QUIT 221 mx.bar.com And last, here is a test mail sent using foo.bar.com: $ hostname myhost.bar.com $ telnet foo.bar.com 25 Trying ***.***.***.***... Connected to foo.bar.com (***.***.***.***). Escape character is '^]'. 220 foo.bar.com ESMTP Sendmail 8.14.1/8.14.1/ITS-7.0/ldap2-1+tls; Tue, 21 Dec 2010 13:27:44 -0700 (MST) helo foo 250 foo.bar.com Hello myhost.bar.com [***.***.***.***], pleased to meet you mail from: [email protected] 250 2.1.0 [email protected]... Sender ok rcpt to: [email protected] 250 2.1.5 [email protected]... Recipient ok data 354 Enter mail, end with "." on a line by itself testing . 250 2.0.0 oBLKRikZ003758 Message accepted for delivery quit 221 2.0.0 foo.bar.com closing connection Connection closed by foreign host. Any ideas? Thanks

  Read the article

• Windows 8.1 won't accept my Media Center Pack Product Key

  - by Daniel

  I just installed Windows 8.1 Pro as an upgrade from an ISO torrent. I was able to activate my original Windows 8 key successfully. However, I tried to activate my Media Center Pack key that I purchased for Windows 8 and it errors out the first try. When I try to activate it again, it then says "This key won't work. Check it and try again, or try a different key.". Do I have to purchase the key again? Thanks

  Read the article

• Win XP Virtual Machine APP that won't START as a terminal services client

  - by Daniel

  I have a Win XP Virtual Machine APP that won't START as a terminal services client..... but if i disable terminal services inside the virtual machine, start the app then start terminal services... the APP runs fine (so long as terminal services are disabled when it starts.....!) My question is... is it possible to script things somehow so as to allow this app to be accessed directly from win 7 (with out having to manually run XP virtual machine)... I.E as I can not run it this way as it won't START with terminal services running.... I.e is it somehow possible to script things so the APP starts and terminal services is delayed then kicks in after a time delay.... (I know this may not be possible but I'm getting sick of all the mucking around...)

  Read the article

• AnyConnect SSL VPN split tunneling for a single website?

  - by Daniel Lucas

  We have a Cisco ASA 5510. We use split tunneling for AnyConnect SSL VPN clients. All internal addresses are tunnelled. Everything else is routed through the client's own internet connection. We use a SaaS service that only responds to requests when they come from one of our own public IP addresses. Because of this, VPN users are unable to access it currently. Is there a way to specify that a specific website should be tunneled and all others should not? NOTE: Worst case we will use a web bookmark on the clientless portal to tranlate through our network, but I'd like to see if the above is possible first.

  Read the article

• Debian DNSSEC - howto secure a domain?

  - by Daniel Marschall

  I have a beginner question about DNSSEC. I have much experience with TLS and cryptography-stuff and would like to try out this new technology. I have googled very much about this but I haven't found useful information for me. I think one confusion in information gathering is that "Debian howto DNSSEC setup" can mean "How to USE DNSSEC for resolving" OR "How to secure your domain with DNSSEC". I am searching the second. I am running a Debian Squeeze server with root privileges which has a domain name ending with ".de" (which is already signed by the root zone). The network interface at this server uses the gateway IP (DNS resolver?) of the datacentre the server is running on. My domain is hosted at freedns.afraid.org , where I can add DNS RRs for my domain. They are currently NOT capable of adding DNSSEC RRs, but I am bugging them to support this soon. ;-) My simple question is: How do I setup DNSSEC on Debian? Resp. who have I ask to? As far as I understand, all I have to do is to run dnssec-keygen on my Debian server and then add the key to my DNS-provider as DNSSEC RR. (And change it every 30 days?) I have looked at this http://www.isc.org/files/DNSSEC_in_6_minutes.pdf but it looks like you have to be the owner of a ZONE, so I don't think this applies to me. Who needs to sign my domain? My DNS-provider or my zone (DeNIC) or can I do it myself? Any help is very appreciated!

  Read the article

• OpenVPN with MacOS X Client and same subnets in local and remote net.

  - by Daniel

  I have a homenetwork 192.168.1.0/24 with gteway 192.168.1.1 and a remote network with the same parameters. Now I want to create a OpenVPN tunnel between those networks. I have no problems with Windows, because Windows routes everything to 192.168.1.0/24 except 192.168.1.1 throught the tunnel. On MacOS X however I see the folling line in the Details window: 2010-05-10 09:13:01 WARNING: potential route subnet conflict between local LAN [192.168.1.0/255.255.255.0] and remote VPN [192.168.1.0/255.255.255.0] When I list the routes I get the following: Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.1.1 UGSc 13 3 en1 127 localhost UCS 0 0 lo0 localhost localhost UH 12 3589 lo0 169.254 link#5 UCS 0 0 en1 192.168.1 link#5 UCS 1 0 en1 192.168.1.1 0:1e:e5:f4:ec:7f UHLW 13 17 en1 1103 192.168.1.101 localhost UHS 0 0 lo0 192.168.6 192.168.6.5 UGSc 0 0 tun0 192.168.6.5 192.168.6.6 UH 1 0 tun0 My Interfaces are en1 - My local Wifi network tun0 - The tunnel interface As can be seen from the routes above there is no entry for 192.168.1.0/24 that routes the traffic through the tunnel interface. When I manually route a single IP like 192.168.1.16 over the tunnel gateway 192.168.6.6, this works. Q: How do I set up my routes in MacOS X for the same behaviour as on windows, to route everything except 192.168.1.1 through the tunnel, but leave the default gateway to be my local 192.168.1.1 ?

  Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >