Search Results

Search found 5121 results on 205 pages for 'dotnetnuke connections'.

Page 20/205 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

• ADO 2.8, VMWare and SQL Server - sudden bulk dropped connections

  - by CodeByMoonlight

  We have an overworked server currently running a single SQL Server 2000 instance on physical hardware, and about 40 different apps interact with it on a daily basis. Last year, the RAID controller failed and we had no spare, so IT Support hurriedly migrated it overnight to a copy running on a VMWare Server. While it was on that server everything ran much quicker due to it being a big improvement in spec. However, the biggest app using it had occasional serious errors which never occurred on physical hardware. Specifically, several times a week it would disconnect batches of users - anywhere from just ten to hundreds at once, and all at the same time. It didn't affect any particular users or PCs or offices - all were affected equally. The only common thing was the app, which is a VB6 app using ADO 2.8 to connect. The other apps connecting to that virtualised instance of SQL Server seemingly had no problems, although they were (and are) responsible for only a tiny fraction of the work involving this server. The upshot is that after about two weeks of loving the speed and hating the random mass disconnections (which we were never able to find a cause for), we sadly took the decision to return to physical hardware and the disconnections vanished. Now we've reached the point where the old server just can't handle all that's being asked of it, and we're intending to migrate everything to 2 or more other servers. The snag is that there's a good chance they'll have to be virtual ones again. Given what happened last time, I'm trying to find out what possible reasons there could be for these mass disconnections. We were running VMWare ESX, but the network is Novell-based. Also, the server had a linked server setup to connect to an Informix server using a known-to-be-buggy ODBC driver, and this is used throughout the day. Any ideas on the cause(s)?

  Read the article

• EC2 instance suddenly refusing SSH connections and won't respond to ping

  - by Chris

  My instance was running fine and this morning I was able to access a Ruby on Rails app hosted on it. An hour later I suddenly wasn't able to access my site, my SSH connection attempts were refused and the server wasn't even responding to ping. I didn't change anything on my system during that hour and reboots aren't fixing it. I've never had any problems connecting or pinging the system before. Can someone please help? This is on my production system! OS: CentOS 5 AMI ID: ami-10b55379 Type: m1.small [] ~% ssh -v *****@meeteor.com OpenSSH_5.2p1, OpenSSL 0.9.8l 5 Nov 2009 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to meeteor.com [184.73.235.191] port 22. debug1: connect to address 184.73.235.191 port 22: Connection refused ssh: connect to host meeteor.com port 22: Connection refused [] ~% ping meeteor.com PING meeteor.com (184.73.235.191): 56 data bytes Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 Request timeout for icmp_seq 2 ^C --- meeteor.com ping statistics --- 4 packets transmitted, 0 packets received, 100.0% packet loss [] ~% ========= System Log ========= Restarting system. Linux version 2.6.16-xenU ([email protected]) (gcc version 4.0.1 20050727 (Red Hat 4.0.1-5)) #1 SMP Mon May 28 03:41:49 SAST 2007 BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000006a400000 (usable) 980MB HIGHMEM available. 727MB LOWMEM available. NX (Execute Disable) protection: active IRQ lockup detection disabled Built 1 zonelists Kernel command line: root=/dev/sda1 ro 4 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Xen reported: 2599.998 MHz processor. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Software IO TLB disabled vmalloc area: ee000000-f53fe000, maxmem 2d7fe000 Memory: 1718700k/1748992k available (1958k kernel code, 20948k reserved, 620k data, 144k init, 1003528k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5202.30 BogoMIPS (lpj=26011526) Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) Checking 'hlt' instruction... OK. Brought up 1 CPUs migration_cost=0 Grant table initialized NET: Registered protocol family 16 Brought up 1 CPUs xen_mem: Initialising balloon driver. highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered i8042.c: No controller found. RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Xen virtual console successfully installed as tty1 Event-channel device installed. netfront: Initialising virtual ethernet driver. mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 Registering block device major 8 IP route cache hash table entries: 65536 (order: 6, 262144 bytes) TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 Using IPI No-Shortcut mode md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 144k freed *************************************************************** *************************************************************** ** WARNING: Currently emulating unsupported memory accesses ** ** in /lib/tls glibc libraries. The emulation is ** ** slow. To ensure full performance you should ** ** install a 'xen-friendly' (nosegneg) version of ** ** the library, or disable tls support by executing ** ** the following as root: ** ** mv /lib/tls /lib/tls.disabled ** ** Offending process: init (pid=1) ** *************************************************************** *************************************************************** Pausing... 5Pausing... 4Pausing... 3Pausing... 2Pausing... 1Continuing... INIT: version 2.86 booting Welcome to CentOS release 5.4 (Final) Press 'I' to enter interactive startup. Setting clock : Fri Oct 1 14:35:26 EDT 2010 [ OK ] Starting udev: [ OK ] Setting hostname localhost.localdomain: [ OK ] No devices found Setting up Logical Volume Management: [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda1 /dev/sda1: clean, 275424/1310720 files, 1161123/2621440 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: [ OK ] Enabling local filesystem quotas: [ OK ] Enabling /etc/fstab swaps: [ OK ] INIT: Entering runlevel: 4 Entering non-interactive startup Starting background readahead: [ OK ] Applying ip6tables firewall rules: modprobe: FATAL: Module ip6_tables not found. ip6tables-restore v1.3.5: ip6tables-restore: unable to initializetable 'filter' Error occurred at line: 3 Try `ip6tables-restore -h' or 'ip6tables-restore --help' for more information. [FAILED] Applying iptables firewall rules: [ OK ] Loading additional iptables modules: ip_conntrack_netbios_ns [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0... done. [ OK ] Starting auditd: [FAILED] Starting irqbalance: [ OK ] Starting portmap: [ OK ] FATAL: Module lockd not found. Starting NFS statd: [ OK ] Starting RPC idmapd: FATAL: Module sunrpc not found. FATAL: Error running install command for sunrpc Error: RPC MTAB does not exist. Starting system message bus: [ OK ] Starting Bluetooth services:[ OK ] [ OK ] Can't open RFCOMM control socket: Address family not supported by protocol Mounting other filesystems: [ OK ] Starting PC/SC smart card daemon (pcscd): [ OK ] Starting hidd: Can't open HIDP control socket: Address family not supported by protocol [FAILED] Starting autofs: Starting automount: automount: test mount forbidden or incorrect kernel protocol version, kernel protocol version 5.00 or above required. [FAILED] [FAILED] Starting sshd: [ OK ] Starting cups: [ OK ] Starting sendmail: [ OK ] Starting sm-client: [ OK ] Starting console mouse services: no console device found[FAILED] Starting crond: [ OK ] Starting xfs: [ OK ] Starting anacron: [ OK ] Starting atd: [ OK ] % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 390 100 390 0 0 58130 0 --:--:-- --:--:-- --:--:-- 58130 100 390 100 390 0 0 56984 0 --:--:-- --:--:-- --:--:-- 0 Starting yum-updatesd: [ OK ] Starting Avahi daemon... [ OK ] Starting HAL daemon: [ OK ] Starting OSSEC: [ OK ] Starting smartd: [ OK ] c CentOS release 5.4 (Final) Kernel 2.6.16-xenU on an i686 domU-12-31-39-00-C4-97 login: INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: Id "3" respawning too fast: disabled for 5 minutes INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: Id "6" respawning too fast: disabled for 5 minutes

  Read the article

• One Mac computer with multiple network connections?

  - by Kyle Lowry

  I have a Mac (OS X 10.5) that I would like to connect to a dedicated/isolated Internet connection (one that is not connected to the LAN), and a LAN. The LAN is set up with its own, separate, Internet connection which is shared by several dozen computers (and is quite slow). I want to set it up so that the Mac uses its own dedicated Internet connection (on a different account with a different company) for its Internet access, but can still access the local area network as well. How can I configure the Mac & the network to allow this?

  Read the article

• Multiple network connections on a Windows 2008 domain controller (private network for NAS)

  - by Sysadminicus

  I have a Windows 2008 server connecting to an iSCSI target on an OpenSolaris box (yay ZFS!). I'd like to create a private network between the 2 boxes that is totally separate of my Windows domain. What is the best way to configure the additional network adapter on the Windows machine so it doesn't think the new subnet is part of the Windows domain? I want to make sure Windows doesn't magically start spewing active directory communications over the private wire and that it doesn't start poisoning the DNS with IPs from the private network.

  Read the article

• MacBook OS X connections

  - by tom ryan

  I got this old MacBook from my son. The wireless internet shuts down. Is it possible that it happens because my battery is dead? (deceased) It works fine for about a half hour, then when it gets hot it refuses to stay on line.

  Read the article

• Allow incoming connections on Windows Server 2008 R2

  - by Richard-MX

  Good day people. First, im new to Windows Server. I've always used Linux/Apache combo, but, my client has and AWS EC2 Windows Server 2008 R2 instance and he wants everything in there. Im working with IIS and PHP enabled as Fast-CGI and everything is working, but, i cant see the websites stored in it from internet. The public DNS that AWS gave us for that instance is: http://ec2-XX-XXX-XXX-121.us-west-2.compute.amazonaws.com/ But, if i copy paste that address, i get nothing, no IIS logo or something like that. My common sense tells me that maybe the firewall could be blocking the access. Can anyone help me and tell where to enable some rules to get this thing working? I don't wanna start enabling rules at random and make the system insecure. If you need any additional info, you can ask me and i will provide it. Thanks in advance. UPDATE: Amazon EC2 display this: Public DNS: ec2-XX-XXX-XXX-121.us-west-2.compute.amazonaws.com Private DNS: ip-XX-XXX-XX-252.us-west-2.compute.internal Private IPs: XX.XXX.XX.25 In my test microinstance, i just to use the Public DNS address (the one that starts with "ec2") and it works like a charm (of course, the micro instance have its own Public DNS im not assuming same address for both instances...) However, for the large instance, i tried to do the same. Set up everything as in the micro instance but if i use the Public DNS, it doesnt load anything. Im suspicious about the Windows Firewall, but, the HTTP related stuff is enabled. What should i do to get access to the large instance? I don't want to set up the domain yet, i want access from an amazon url. 2ND EDIT: all fixed. Charles pointed that maybe Security Groups was not properly set up for the instance. He was right. Just added HTTP service to the rules and all works good.

  Read the article

• Mac SMB connections to Windows 2003 server, leaving Open Files

  - by Bruce Garlock

  We have several Mac clients (Both 10.5, and 10.6) mounting a share from a Windows 2003 server. At least once a day, our archivist will go into this share to archive items from it, to the backup server. Most of the time, she has no issues: she copies the folder to the archive server, when it's done, she deletes it from this share. Then, she will come upon one, and it will say she doesn't have permission. When I go into the Open sessions, it will say that a particular user has a READ lock on the file, in Windows 2003. Of course, this person does not have the file open, and the only way we can delete it, is to close the open session on the file. My thoughts: The Mac likes to "sprinkle" Hidden "Resource Forks" on SMB servers, and possibly, when this Mac who last wrote to that share, closes out of the file, and these files still exist. Windows 2003 has a bug, that doesn't properly "release" the OPLOCK on the file? Steve Ballmer just doesn't like Mac's, so he wants to annoy everyone by not releasing file locks :-) What can be done about this? It happens every day, and sometimes several times per day! Many thanks, Bruce

  Read the article

• CentOS/Apache killing connections

  - by fin1te

  Getting a really strange error. Basically, whenever I browse to my server (http://[ip_address] or http://[hostname]), it doesn't load, and my active SSH connection drops out. I installed CentOS 5.5, and then httpd and PHP 5.3. No other applications where installed, so I can't imagine it's something else causing it. I also reinstalled CentOS 5.5 again, completely fresh, the only thing I did to it was yum install httpd, and it still caused this issue. I've changed nothing in the config or anything else. Driving me mad, has anyone heard of this? It's really frustrating since everytime I attempt to debug this issue, I get kicked off SSH and have to log back in. Theres nothing in the Apache error logs, and nothing in the access log recording my attempt. Also, the result from uname - Linux [hostname] 2.6.35.4-rscloud #8 SMP Mon Sep 20 15:54:33 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux Thank you

  Read the article

• Hanging of host network connections when starting KVM guest on bridge

  - by Chris Phillips

  Hi, I've a KVM system upon which I'm running a network bridge directly between all VM's and a bond0 (eth0, eth1) on the host OS. As such, all machines are presented on the same subnet, available outside of the box. The bond is doing mode 1 active / passive, with an arp_ip_target set to the default gateway, which has caused some issues in itself, but I can't see the bond configs mattering here myself. I'm seeing odd things most times when I stop and start a guest on the platform, in that on the host I lose network connectivity (icmp, ssh) for about 30 seconds. I don't lose connectivity on the other already running VM's though... they can always ping the default GW, but the host can't. I say "about 30 seconds" but from some tests it actually seems to be 28 seconds usually (or at least, I lose 28 pings...) and I'm wondering if this somehow relates to the bridge config. I'm not running STP on the bridge at all, and the forwarding delay is set to 1 second, path cost on the bond0 lowered to 10 and port priority of bond0 also lowered to 1. As such I don't think that the bridge should ever be able to think that bond0 is not connected just fine (as continued guest connectivity implies) yet the IP of the host, which is on the bridge device (... could that matter?? ) becomes unreachable. I'm fairly sure it's about the bridged networking, but at the same time as this happens when a VM is started there are clearly loads of other things also happening so maybe I'm way off the mark. Lack of connectivity: # ping 10.20.11.254 PING 10.20.11.254 (10.20.11.254) 56(84) bytes of data. 64 bytes from 10.20.11.254: icmp_seq=1 ttl=255 time=0.921 ms 64 bytes from 10.20.11.254: icmp_seq=2 ttl=255 time=0.541 ms type=1700 audit(1293462808.589:325): dev=vnet6 prom=256 old_prom=0 auid=42949672 95 ses=4294967295 type=1700 audit(1293462808.604:326): dev=vnet7 prom=256 old_prom=0 auid=42949672 95 ses=4294967295 type=1700 audit(1293462808.618:327): dev=vnet8 prom=256 old_prom=0 auid=42949672 95 ses=4294967295 kvm: 14116: cpu0 unimplemented perfctr wrmsr: 0x186 data 0x130079 kvm: 14116: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xffdd694a kvm: 14116: cpu0 unimplemented perfctr wrmsr: 0x186 data 0x530079 64 bytes from 10.20.11.254: icmp_seq=30 ttl=255 time=0.514 ms 64 bytes from 10.20.11.254: icmp_seq=31 ttl=255 time=0.551 ms 64 bytes from 10.20.11.254: icmp_seq=32 ttl=255 time=0.437 ms 64 bytes from 10.20.11.254: icmp_seq=33 ttl=255 time=0.392 ms brctl output of relevant bridge: # brctl showstp brdev brdev bridge id 8000.b2e1378d1396 designated root 8000.b2e1378d1396 root port 0 path cost 0 max age 19.99 bridge max age 19.99 hello time 1.99 bridge hello time 1.99 forward delay 0.99 bridge forward delay 0.99 ageing time 299.95 hello timer 0.50 tcn timer 0.00 topology change timer 0.00 gc timer 0.04 flags vnet5 (3) port id 8003 state forwarding designated root 8000.b2e1378d1396 path cost 100 designated bridge 8000.b2e1378d1396 message age timer 0.00 designated port 8003 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags vnet0 (2) port id 8002 state forwarding designated root 8000.b2e1378d1396 path cost 100 designated bridge 8000.b2e1378d1396 message age timer 0.00 designated port 8002 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags bond0 (1) port id 0001 state forwarding designated root 8000.b2e1378d1396 path cost 10 designated bridge 8000.b2e1378d1396 message age timer 0.00 designated port 0001 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags I do see the new port listed as learning, but in line with the forward delay, only for 1 or 2 seconds when polling the brctl output on a loop. All pointers, tips or stabs in the dark appreciated.

  Read the article

• Local SSL connections are causing redirect loop (after Ubuntu update)

  - by codeinthehole

  Following a recent Ubuntu update, my local websites are no longer serving their pages over SSL. For example, my .htaccess file attempts to ensure /sign-in is always served over HTTPS: RewriteEngine On RewriteCond %{HTTPS} off RewriteCond %{REQUEST_URI} /sign-in RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI} [L,QSA,R=301] However when I make a request to /sign-in on the domain site2-local , I get the error "The page isn't redirecting properly" with the following in /var/log/apache2/error.log [Tue Jun 08 12:20:57 2010] [info] [client 127.0.1.1] Connection to child 0 established (server site1-local:443) [Tue Jun 08 12:20:57 2010] [info] Seeding PRNG with 656 bytes of entropy [Tue Jun 08 12:20:57 2010] [info] Initial (No.1) HTTPS request received for child 0 (server site2-local:443) [Tue Jun 08 12:20:57 2010] [info] Subsequent (No.2) HTTPS request received for child 0 (server site2-local:443) [Tue Jun 08 12:20:57 2010] [info] Subsequent (No.3) HTTPS request received for child 0 (server site2-local:443) [Tue Jun 08 12:20:57 2010] [info] Subsequent (No.4) HTTPS request received for child 0 (server site2-local:443) [Tue Jun 08 12:20:57 2010] [info] Subsequent (No.5) HTTPS request received for child 0 (server site2-local:443) [Tue Jun 08 12:20:57 2010] [info] Subsequent (No.6) HTTPS request received for child 0 (server site2-local:443) [Tue Jun 08 12:20:57 2010] [info] Subsequent (No.7) HTTPS request received for child 0 (server site2-local:443) [Tue Jun 08 12:20:57 2010] [info] Subsequent (No.8) HTTPS request received for child 0 (server site2-local:443) [Tue Jun 08 12:20:57 2010] [info] Subsequent (No.9) HTTPS request received for child 0 (server site2-local:443) [Tue Jun 08 12:20:57 2010] [info] Subsequent (No.10) HTTPS request received for child 0 (server site2-local:443) [Tue Jun 08 12:21:12 2010] [info] [client 127.0.1.1] (70007)The timeout specified has expired: SSL input filter read failed. [Tue Jun 08 12:21:12 2010] [info] [client 127.0.1.1] Connection closed to child 0 with standard shutdown (server site2-local:443) There is a connection to site1-local (another site on my machine which shares the certificate), which I don't understand. Anyone know what is causing this issue?

  Read the article

• SSH multi-hop connections with netcat mode proxy

  - by aef

  Since OpenSSH 5.4 there is a new feature called natcat mode, which allows you to bind STDIN and STDOUT of local SSH client to a TCP port accessible through the remote SSH server. This mode is enabled by simply calling ssh -W [HOST]:[PORT] Theoretically this should be ideal for use in the ProxyCommand setting in per-host SSH configurations, which was previously often used with the nc (netcat) command. ProxyCommand allows you to configure a machine as proxy between you local machine and the target SSH server, for example if the target SSH server is hidden behind a firewall. The problem now is, that instead of working, it throws a cryptic error message in my face: Bad packet length 1397966893. Disconnecting: Packet corrupt Here is an excerpt from my ~/.ssh/config: Host * Protocol 2 ControlMaster auto ControlPath ~/.ssh/cm_socket/%r@%h:%p ControlPersist 4h Host proxy-host proxy-host.my-domain.tld HostName proxy-host.my-domain.tld ForwardAgent yes Host target-server target-server.my-domain.tld HostName target-server.my-domain.tld ProxyCommand ssh -W %h:%p proxy-host ForwardAgent yes As you can see here, I'm using the ControlMaster feature so I don't have to open more than one SSH connection per-host. The client machine I tested this with is an Ubuntu 11.10 (x86_64) and both proxy-host and target-server are Debian Wheezy Beta 3 (x86_64) machines. The error happens when I call ssh target-server. When I call it with the -v flag, here is what I get additionally: OpenSSH_5.8p1 Debian-7ubuntu1, OpenSSL 1.0.0e 6 Sep 2011 debug1: Reading configuration data /home/aef/.ssh/config debug1: Applying options for * debug1: Applying options for target-server.my-domain.tld debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: auto-mux: Trying existing master debug1: Control socket "/home/aef/.ssh/cm_socket/[email protected]:22" does not exist debug1: Executing proxy command: exec ssh -W target-server.my-domain.tld:22 proxy-host.my-domain.tld debug1: identity file /home/aef/.ssh/id_rsa type -1 debug1: identity file /home/aef/.ssh/id_rsa-cert type -1 debug1: identity file /home/aef/.ssh/id_dsa type -1 debug1: identity file /home/aef/.ssh/id_dsa-cert type -1 debug1: identity file /home/aef/.ssh/id_ecdsa type -1 debug1: identity file /home/aef/.ssh/id_ecdsa-cert type -1 debug1: permanently_drop_suid: 1000 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.0p1 Debian-3 debug1: match: OpenSSH_6.0p1 Debian-3 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8p1 Debian-7ubuntu1 debug1: SSH2_MSG_KEXINIT sent Bad packet length 1397966893. Disconnecting: Packet corrupt

  Read the article

• Web based console connections not working in Windows 7 posted: Jan 20, 2010 8:55 AM

  - by nmeth

  For slightly complicated reasons we tend to give people console access to VMs via the webui. This has worked fine in the past, however when the users update their client machines to Windows 7 (or Vista, I am told, although I have not tested that), then the console fails to work. On IE8, having allowed the ActiveX control, the tab causes a "Internet Explorer has stopped working" dialog. On Firefox 3.5 , once the plugin has been installed, using the console causes the browser to crash. I've updated to the most recent VC 2.5 release, and ESX 3.5u5. Anyone else seeing this? Any clues how to get round it (other than using the fat client). Nigel.

  Read the article

• Timout dead connections to Digi PortServer TS16

  - by MT

  We are using Digi portservers for console management of our routers. Basically users telnet to the Digis on ports 2001-2016 (corresponding to the physical serial port they want to connect to). Does anyone know if there is a way to cause the digi to close/release a user's connection after an period of idle time and if possible, where that time can be specified?

  Read the article

• Dialing into multiple PPP connections on Ubuntu

  - by sharjeel

  I have multiple 3G USB based Modems. I would like them to keep connected simultaneously, NOT necessarily aggregating their bandwidth; a separate intelligent application would manage their utilization effectively. However I am running into problem of setting up proper routes for the ppp0,ppp1 interfaces: when one of them connects, other's entries in the routing table get updated so it is no more usable. If I reconnect the second one, it would override the first one's routing entries. If I do it over and over, sometimes both of them's entries disappear while in rare cases the two work well. I have tried it both using NetworkManager as well as WVDial but issue pops up in both of these. Perhaps both of them use same PPP dialer at the backend and thats why this issue appears. What is the proper solution to make them work together? In the long run, I'd also like them to automatically dial in once USB gets connected.

  Read the article

• VPN Router drops connections

  - by Kathleen

  We are using a Netgear VPN Firewall Router FVS318v3.. We have a DSL connection here at the office, and my users complain of the connection dropping, or locking up on their end.. Latest firmware is installed, rebooting the router doesn't help, no other internet connectivity issues reported anywhere else (ie., no other internet connection problems here, or at their end, except when connecting to the VPN..) Is there anything else I can check to pinpoint this problem? TIA!!!

  Read the article

• background jobs and ssh connections

  - by petrelharp

  This question has come up quite a lot (really a lot), but I'm finding the answers to be generally incomplete. The general question is "Why does/doesn't my job get killed when I exit/kill ssh?", and here's what I've found. The first question is: How general is the following information? The following seems to be true for modern Debian linux, but I am missing some bits; and what do others need to know? All child processes, backgrounded or not of a shell opened over an ssh connection are killed with SIGHUP when the ssh connection is closed only if the huponexit option is set: run shopt huponexit to see if this is true. If huponexit is true, then you can use nohup or disown to dissociate the process from the shell so it does not get killed when you exit. If huponexit is false, which is the default on at least some linuxes these days, then backgrounded jobs will not be killed on normal logout. But even if huponexit is false, then if the ssh connection gets killed, or drops (different than normal logout), then backgrounded processes will still get killed. This can be avoided by disown or nohup as in (2). There is some distinction between (a) processes whose parent process is the terminal and (b) processes that have stdin, stdout, or stderr connected to the terminal. I don't know what happens to processes that are (a) and not (b), or vice versa. Final question: How can I avoid behavior (3)? In other words, by default in Debian backgrounded processes run along merrily by themselves after logout but not after the ssh connection is killed. I'd like the same thing to happen to processes regardless of whether the connection was closed normally or killed. Or, is this a bad idea?

  Read the article

• Is it possible to nest VPN connections?

  - by Tie-fighter

  Is it possible to create an VPN connection while using site-to-site VPN? Also see: http://serverfault.com/questions/126537/is-it-possible-to-use-microsofts-secure-connection-rules-ipsec-with-vpn

  Read the article

• SSH tunneling hangs with many connections

  - by middleofdreams

  I am forced to use SSH tunneling to access many servers (over 100) via one gateway server. To keep connection alive I am using autossh. Everything works pretty well until there is high traffic (people are connecting to most of the servers at once). then ssh process reaches 12% of cpu (which is configured maximum for separate process) and no connection is working anymore - i have to restart autossh script. What could be the possible reason for that?

  Read the article

• Software to measure the speed of http browser connections

  - by Dan Revell

  I'm trying to gather some ammunition about my ISP and it's aggressive traffic shaping of particular websites. So I'm looking for an application that will allow me to see what speeds I get to particular websites. I want to open a browser connection to a particular video streaming website for example and see the speed of the connection that gets made, be it http or plain tcp. I'm after something along the lines of TCPView but unfortunately this doesn't include transfer speeds. I'm half tempted to write one myself but hopefully something will already be out there that does the job.

  Read the article

• windows server 2003 cannot accept connections

  - by Seb

  Hi everyone, I am running a Windows Server 2003 OS and am noticing that no one is able to connect to the machine through Remote Desktop. I have gone through the Terminal Services Configuration to make sure that we had the RDP-Tcp connection enabled and I've checked to see that the server was listening to port 3389. Are there any other options since I've tried to ping into our host server with no results. Thanks in advance.

  Read the article

• Remote Connections Windows Server 2008 [closed]

  - by vaibhav

  Possible Duplicate: Remote Connection Windows Server 2008 How many remote connection can be made in windows server 2008. I want to work with 2 my friends on a same machine. But windows server 2008 forces, second user to logout when 3rd user try to login.

  Read the article

• Outlook / Gmail 'too many simultaneous connections' error

  - by sam

  I'm just setting up Outlook for Mac, and I'm trying to add a Google Apps application for business email (Gmail). I've set it up correctly (same details worked in Mac mail). But I keep getting two errors, either or just a error asking for the username and password again. Just to confirm the user name and password are correct, although when I go into menu command Tools - Account and look in the password field for that account it's blank. But if I just click cancel on the popup asking for my username password it just continues to get mail in the background for about 30 seconds, before again asking again for the password, or showing the above error which I can click 'yes' to and again it will get the mail. But after 30 seconds it does the same thing. I've got two other accounts set up fine, one a horde account (hosted webmail using POP3) and the other a iCloud .me account running on IMAP. What might be causing this and how I can remedy it? A bit more background: the machine is a MacBook Pro running Mac OS X v10.7 (Lion). Update 2013-11-02 I've updated Outlook to SP3, but I still get the same error.

  Read the article

• How to stop NAT dropping idle connections?

  - by WGH

  I have a TCP connection that can be idle for many hours. The traffic is flowing from the server to the client only. One might say it's kind of push notification. My home router, however, tends to drop the connection silently after 20 minutes (the value of /proc/sys/net/netfilter/nf_conntrack_tcp_timeout_established). The server detects the loss once it tries to send anything (I assume it receives RST from the router itself). As client never sends anything, it never detects the loss. RFC 5382 "NAT Behavioral Requirements for TCP" states the following: A NAT can check if an endpoint for a session has crashed by sending a TCP keep-alive packet and receiving a TCP RST packet in response. It makes sense. It's much more effective than sending keep-alives by the host itself (as only NAT knows its own timeout). And probably not hard to implement. Is there any NAT solutions implementing this? It would be great if there was a way to enable this in iptables.

  Read the article

• IPv6 connections routed to IPv4 device

  - by Yvan JANSSENS

  I have an IBM 9406-250 with V5R1 and IPv4 only connectivity, and want it to be reachable over IPv6. I cannnot install an IPv6 stack on it, but I want it to be accessible by IPv6 so I can drop the requirement to VPN to my home network. I have an OpenWRT device running, which takes care of the IPv6 routing on my network and the tunnel to SIXXS, and I was wondering if it is possible to assign another IPv6 address to that device, and route it to the IPv4 IBM computer. Which software do I need for this, and how is this technique called?

  Read the article

• Setting Remote Desktop to allows IPv6 connections

  - by Garrett

  Setup: Basically I have 3 machines (2 virtual and 1 physical) that I would like to be able to RDP in to from outside my NAT (a router). The VMs are Windows 7 and Windows XP, both fully patched with Teredo installed and working, both running in VirtualBox (their host also has Teredo working, though I'm not sure if that matters). They both have bridged network adapters with promiscuous mode enabled. The physical machine is Windows 7 fully patched with an HFS server running on it and a dynamic DNS set up for my public IPv4 address and port forwarded. It also has Teredo installed and working. Symptoms: According to http://test-ipv6.com/ all 3 have public IPv6 addresses, and they can all connect to http://ipv6.google.com/. I can ping the XP VM from the host it's running on but I cannot ping it from any other machine. Also, I cannot ping either of the other machines from anywhere. I cannot connect to any of them over RDP from IPv6, however I can connect to all of them through IPv4. Any ideas what is going wrong?

  Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >