Search Results

Search found 1641 results on 66 pages for 'ident ca'.

Page 20/66 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

  • Why my AD domain doesn't work on my laptop

    - by Frederick Marcoux
    I have installed Windows Server 2008 R2 on a virtual machine with a bridged network card and installed Active Directory. I configured it and when I try to connect my laptop to the domain name, in this case, creationsmicroweb.ca (doesn't exist, don't try, for local only), I can't get connected. My laptop just doesn't see it. I don't know why! There's a resume of my config: Domain Name: creationsmicroweb.ca Forest: new, principal domain controller IP: Fixed (192.168.1.100) DNS Name: none (just for local, I ignored them) NETBIOS name: MICROWEB If someone as found why, please help me! This is for my business that I'm starting and I can't find why it doesn't work!

    Read the article

  • Web based interface for open SSL client certificates

    - by Felix
    Hi there! We are currently developing a apache2-based web application and want to invite some beta testers to give it a try. To be on the safe side, access should be provided by individual browser certificates (.p12) which are issued using a (fake) CA. Our users should be passing a complete register/login process and some of them will be granted administrative privileges within the application. That's why a preceding simple web-based authentication won't be sufficient. Atm, I am using a serverside shellscript to generate the certificates each time. Do you know about a small, web-based tool to simplify the process of generating / revoking those certificates? Maybe an overview of the CA's index.txt plus the option to revoke a cert and a link to download them directly?

    Read the article

  • OpenVPN Setup - Service Won't Start

    - by Lenwood
    I'm in the process of setting up OpenVPN on a VPS running Debian 6. I've walked step-by-step through this guide twice now, and I can't get the service to start. When I start the service, the error reported in the log file is: Cannot ioctl TUNSETIFF tun: Inappropriate ioctl for device (errno=25) I've searched the web a few times and I'm not finding anything helpful. I've tried: Changing file permissions: no change Deleting the file: get an error stating no file found (errno=2) Making a folder named "tun": get an error stating no file found (errno=2) I've wiped my installation and completed the steps verbatim twice now. I get no errors along the way, just the error above within my log file. The contents of my server.conf file are listed below, minus all the comments for brevity. Can anyone help? port 1194 proto udp dev tun ca ca.crt cert myserver.crt key myserver.key dh dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log log openvpn.log verb 3

    Read the article

  • Good Motherboard for 16/16/4 configurations?

    - by Burnzy
    I am looking for a board that supports 16/16/4 configurations (lga 1366 of course). For 2 graphic cards in SLI (250gts twin frozr) and a revodrive(not bought yet -20-227-578--Product"http://www.newegg.ca/Product/Product.aspx?Item=N82E16820227578&cm_re=revodrive--20-227-578--Product ). This boards seems alright for my needs (http://www.newegg.ca/Product/Product.aspx?Item=N82E16813131665&cm_re=sabertooth--13-131-665--Product), but I am afraid it's going to be too tight for both of my graphic cards. Do anyone know any other board that would do the job? Preferably asus motherboards, as they are the most stable boards I know Thanks for your help!

    Read the article

  • ssl_error_log apache issue

    - by lakshmipathi
    https://localhost works but https://ipaddress didn't cat logs/ssl_error_log [Mon Aug 02 19:04:11 2010] [error] [client 192.168.1.158] (13)Permission denied: access to /ajaxterm denied [root@space httpd]# cat logs/ssl_access_log 192.168.1.158 - - [02/Aug/2010:19:04:11 +0530] "GET /ajaxterm HTTP/1.1" 403 290 [root@space httpd]# cat logs/ssl_request_log [02/Aug/2010:19:04:11 +0530] 192.168.1.158 SSLv3 DHE-RSA-CAMELLIA256-SHA "GET /ajaxterm HTTP/1.1" 290 httpd.conf file NameVirtualHost *:443 <VirtualHost *:443> ServerName localhost SSLEngine on SSLCertificateFile /etc/pki/tls/certs/ca.crt SSLCertificateKeyFile /etc/pki/tls/private/ca.key <Directory /usr/share/ajaxterm > Options FollowSymLinks AllowOverride None Order deny,allow Allow from All </Directory> DocumentRoot /usr/share/ajaxterm DirectoryIndex ajaxterm.html ProxyRequests Off <Proxy *> # Order deny,allow Allow from all </Proxy> ProxyPass /ajaxterm/ http://localhost:8022/ ProxyPassReverse /ajaxterm/ http://localhost:8022/ ErrorLog error_log.log TransferLog access_log.log </VirtualHost> How to fix this ?

    Read the article

  • How to download a url as a file?

    - by Michelle
    A website url has "hidden" some mp3 files by embedding them as shockwave files, as follows: <span class="caption"><!-- Odeo player --><embed src="http://odeo.com/flash/audio_player_tiny_gray.swf"quality="high" name="audio_player_tiny_gray" align="middle" allowScriptAccess="always" wmode="transparent" type="application/x-shockwave-flash" flashvars="valid_sample_rate=true external_url=http://podcast.cbc.ca/mp3/sundayeditionstream_20081125_9524.mp3" pluginspage="http://www.macromedia.com/go/getflashplayer"></embed></span> How can I download the files for off-line listening? I've found two methods: 1. The StackOverflow Method Create a new local html file with just the links eg <a href="http://podcast.cbc.ca/mp3/sundayeditionstream_20081125_9524.mp3">Sunday Edition 25Nov2008</a> Open the file in the browser, right click the link and File Save Link As. 2. The SuperUser Method Install the Firefox addin Iget. (Be sure to use the right version for your Firefox version.) Tools Downloads Enter url in field. Are there any other ways?

    Read the article

  • What kind of SSL Cert do I need and where do I get it?

    - by chacham15
    I want to have subdomains with SSL within my domain. The main difference is that each subdomain is hosted by a different person with a different public key/private key pair. Let me illustrate with an example: User send his public key and requests subdomain from foo.com User is added and assigned subdomain bar (bar.foo.com). Users public key is stored for future validation against bar.foo.com User goes to bar.foo.com and see's a validated SSL connection. From what I gather, this means that I need to create a CA, which is fine. The problem is that from what I recall, a CA needs a special sort of SSL Cert. How do I go about getting this?

    Read the article

  • OpenVPN Configuration - Windows 7 client & debian server

    - by Guillaume
    I recently formatted my Windows 7 computer and lost my client's config files for OpenVPN. I recovered the certificates and default config that were left on the server but I haven't managed to make the whole thing work again. I assume the server's config and routing table are OK because it was working before (although quite some time ago). Would any of you experts be able to help? server.conf # Serveur TCP/666 mode server proto udp port 666 dev tun # Cles et certificats ca ca.crt cert server.crt key server.key dh dh1024.pem tls-auth ta.key 0 cipher AES-256-CBC # Reseau server 10.8.0.0 255.255.255.0 #push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" push "redirect-gateway def1" keepalive 10 120 # Securite user nobody group nogroup chroot /etc/openvpn/jail persist-key persist-tun comp-lzo # Log verb 3 mute 20 status openvpn-status.log log-append /var/log/openvpn.log client.conf # Client client dev tun proto udp remote *my server's ip address*:666 cipher AES-256-CBC # Cles ca ca.crt cert client1.crt key client1.key tls-auth ta.key 1 # Securite nobind persist-key persist-tun comp-lzo verb 3 Routing table on debian server when OpenVPN server is running: Destination Gateway Genmask Indic Metric Ref Use Iface 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 my server's ip * 255.255.255.0 U 0 0 0 eth0 default 72815.trg.dedic 0.0.0.0 UG 0 0 0 eth0 Routing table on Windows 7 client (OpenVPN not working) =========================================================================== Interface List 19...00 f0 8a 1b 6e 5c ......TAP-Win32 Adapter V9 12...90 2e 34 33 84 7b ......Atheros AR8151 PCI-E Gigabit Ethernet Controller ( NDIS 6.20) 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.11 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.11 276 192.168.1.11 255.255.255.255 On-link 192.168.1.11 276 192.168.1.255 255.255.255.255 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.11 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.11 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: [...] =========================================================================== Persistent Routes: None And when the link is established between my client and the server: The server's routing table stays the same. The client's becomes: =========================================================================== Interface List 19...00 f0 8a 1b 6e 5c ......TAP-Win32 Adapter V9 12...90 2e 34 33 84 7b ......Atheros AR8151 PCI-E Gigabit Ethernet Controller ( NDIS 6.20) 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.11 20 0.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 10.8.0.1 255.255.255.255 10.8.0.5 10.8.0.6 30 10.8.0.4 255.255.255.252 On-link 10.8.0.6 286 10.8.0.6 255.255.255.255 On-link 10.8.0.6 286 10.8.0.7 255.255.255.255 On-link 10.8.0.6 286 my server's ip 255.255.255.255 192.168.1.1 192.168.1.11 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 192.168.1.0 255.255.255.0 On-link 192.168.1.11 276 192.168.1.11 255.255.255.255 On-link 192.168.1.11 276 192.168.1.255 255.255.255.255 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 10.8.0.6 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.11 276 255.255.255.255 255.255.255.255 On-link 10.8.0.6 286 =========================================================================== Persistent Routes: None What's working: Server and client do connect to each other, SSL certificates are OK. The client gets an IP (10.8.0.6) from the server OpenVPN client is started as an administrator. But: I cannot ping the other one on either side. 'Gateway' value is empty on client's side (in the adapter's "status" window). Client has got no internet access when the link is up. Ideal configuration: I only want the client to be able to use the server's Internet access and access its resources (MySQL server in particular). I do not need or want the server to access the client's local network. The client needs to be able to access it's local network, although all Internet traffic should be redirected to the VPN link. I spent a considerable amount of time on this but it's still not working, any help would be much appreciated. Thanks :)

    Read the article

  • How to generate new CSRs for TLS use in sendmail?

    - by Mikey B
    SendMail 8.13.8 | CentOS 5.x Hi Guys, I'm using ca-signed TLS certificates on my sendmail server and they are up for renewal soon. Our new CA doesn't like our old CSR so I need to generate a new CSR. Can someone point me to the procedure for doing this (without affecting the production certs that are already in use)? I'm paranoid of overwriting the old TLS certs in the process of generating a CSR. Most of the instructions I've found are for implementing self-signed TLS certs -- which isn't an option for me at this time. I'm thinking it would something like: openssl req -new -nodes -out new-tls.csr -keyout new-tls-private.key But I wasn't sure if I was missing some options there such as the -x509 option... -M

    Read the article

  • nginx: override global ssl directives for specific servers

    - by alkar
    In my configuration I have placed the ssl_* directives inside the http block and have been using a wildcard certificate certified by a custom CA without any problems. However, I now want to use a new certificate for a new subdomain (a server), that has been certified by a recognized CA. Let's say the TLD is blah.org. I want my custom certificate with CN *.blah.org to be used on all domains except for new.blah.org that will use its own certificate/key pair of files with CN new.blah.org. How would one do that? Adding new ssl_* directives inside the server block doesn't seem to override the global settings.

    Read the article

  • OpenVPN IPv6 over IPv4 tunnel

    - by user66779
    Today I installed OpenVPN 2.3rc2 on both my windows 7 client machine and centos 6 server. This new version of OpenVPN provides full compatibility for IPv6. The Problem: I am currently able to connect to the server (through the IPv4 tunnel) and ping the IPv6 address which is assigned to my client and I can also ping the tun0 interface on the server. However, I cannot browse to any IPv6 websites. My vps provider has given me this: 2607:f840:0044:0022:0000:0000:0000:0000/64 is routed to this server (2607:f840:0:3f:0:0:0:eda). This is ifconfig after setup with OpenVPN running: eth0 Link encap:Ethernet HWaddr 00:16:3E:12:77:54 inet addr:208.111.39.160 Bcast:208.111.39.255 Mask:255.255.255.0 inet6 addr: 2607:f740:0:3f::eda/64 Scope:Global inet6 addr: fe80::216:3eff:fe12:7754/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2317253 errors:0 dropped:7263 overruns:0 frame:0 TX packets:1977414 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1696120096 (1.5 GiB) TX bytes:1735352992 (1.6 GiB) Interrupt:29 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 inet6 addr: 2607:f740:44:22::1/64 Scope:Global UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:739567 errors:0 dropped:0 overruns:0 frame:0 TX packets:1218240 errors:0 dropped:1542 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:46512557 (44.3 MiB) TX bytes:1559930874 (1.4 GiB) So OpenVPN is sucessfully creating a tun0 interface and assigning clients IPv6 addresses using 2607:f840:44:22::/64. The first client to connect is getting 2607:f840:44:22::1000 and the second 2607:f840:44:22::1001, and so on... plus 1 each time. After connecting as the first client, I can ping from my windows client machine 2607:f740:44:22::1 and 2607:f740:44:22::1000. However, I have no access to IPv6 websites. I believe the problem is that the tun0 IPv6 addressees are not being forwarded to the eth0 interface. This is the firewall running on the server: #!/bin/sh # # iptables configuration script # # Flush all current rules from iptables # iptables -F iptables -t nat -F # # Allow SSH connections on tcp port 22 # iptables -A INPUT -i eth0 -p tcp --dport 22 -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 22 -j ACCEPT # # Set access for localhost # iptables -A INPUT -i lo -j ACCEPT # # Accept connections on 1195 for vpn access from client # iptables -A INPUT -i eth0 -p udp --dport 1195 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p udp --sport 1195 -m state --state ESTABLISHED -j ACCEPT # # Apply forwarding for OpenVPN Tunneling # iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j SNAT --to 209.111.39.160 iptables -A FORWARD -j REJECT # # Enable forwarding # echo 1 > /proc/sys/net/ipv4/ip_forward # # Set default policies for INPUT, FORWARD and OUTPUT chains # iptables -P INPUT ACCEPT iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT # # IPv6 # IP6TABLES=/sbin/ip6tables $IP6TABLES -F INPUT $IP6TABLES -F FORWARD $IP6TABLES -F OUTPUT echo -n "1" >/proc/sys/net/ipv6/conf/all/forwarding echo -n "1" >/proc/sys/net/ipv6/conf/all/proxy_ndp echo -n "0" >/proc/sys/net/ipv6/conf/all/autoconf echo -n "0" >/proc/sys/net/ipv6/conf/all/accept_ra $IP6TABLES -A INPUT -i eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT $IP6TABLES -A INPUT -i eth0 -p tcp --dport 22 -j ACCEPT $IP6TABLES -A INPUT -i eth0 -p icmpv6 -j ACCEPT $IP6TABLES -P INPUT ACCEPT $IP6TABLES -P FORWARD ACCEPT $IP6TABLES -P OUTPUT ACCEPT Server.conf: server-ipv6 2607:f840:44:22::/64 server 10.8.0.0 255.255.255.0 port 1195 proto udp dev tun ca ca.crt cert server.crt key server.key dh dh2048.pem ifconfig-pool-persist ipp.txt push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" keepalive 10 60 tls-auth ta.key 0 cipher AES-256-CBC comp-lzo user nobody group nobody persist-key persist-tun status openvpn-status.log log-append openvpn.log verb 5 Client.conf: client dev tun nobind keepalive 10 60 hand-window 15 remote 209.111.39.160 1195 udp persist-key persist-tun ca ca.crt key client1.key cert client1.crt remote-cert-tls server tls-auth ta.key 1 comp-lzo verb 3 cipher AES-256-CBC I'm not sure where I am going wrong, it could be the firewall, or something missing from server or client.conf. This version of OpenVPN was only released yesterday, and there's little info on the internet about how to setup an IPv6 over IPv4 vpn tunnel. I've read the manual for this new version of OpenVPN (parts pertaining to IPv6) and it provides very little info too. Thanks for any help.

    Read the article

  • Accurate way to check latency between Server ?

    - by Rick
    Hi, First of all, I hope my post are is posted in the right section . Below are something i got confused hope you one can help. My business partner 's IP server are in: Sanjose, CA , and I am looking for a datacenter which give the least latency to that IP. I found 2 . 1st datcenter is in San Francisco, CA . 2nd data center is in Newyork. Then I do the ping from each datacenter to the my partner's IP. 1st datcenter's result: 75ms 2nd datacenter's result: 2ms I 've done multiple time, 2nd datacenter always give better result. Now my question is: Isn't the 1st datacenter suppose to give better result, since their location are closer ? How come the result produce different, what is the accurate way to check latency ? Thanks

    Read the article

  • Identifying program attempting to install certificate on windows

    - by R..
    I'm trying to help a friend using Windows (which I'm not an expert on by any means) who's experiencing malware-like behavior: a dialog box is repeatedly popping up reading: You are about to install a certificate from a certification authority (CA) claiming to represent: CE_UmbrellaCert Warning: If you install this root certificate, Windows will automatically trust any certificate issued by this CA. Installing a certificate with an unconfirmed thumbprint is a security risk. If you click "yes" you acknowledge this risk. AV and anti-malware scanners don't detect anything. My friend hasn't accepted installing the certificate, but whatever program is trying to install it keeps retrying, making the system unusable (constant interruptions). Is there any way to track down which program is making the attempt to install it so this program can be uninstalled/deleted?

    Read the article

  • How to download a URL as a file?

    - by Michelle
    A website URL has "hidden" some MP3 files by embedding them as Shockwave files, as follows. <span class="caption"><!-- Odeo player --><embed src="http://odeo.com/flash/audio_player_tiny_gray.swf"quality="high" name="audio_player_tiny_gray" align="middle" allowScriptAccess="always" wmode="transparent" type="application/x-shockwave-flash" flashvars="valid_sample_rate=true external_url=http://podcast.cbc.ca/mp3/sundayeditionstream_20081125_9524.mp3" pluginspage="http://www.macromedia.com/go/getflashplayer"></embed></span> How can I download the files for off-line listening? I've found two methods: 1. The Stack Overflow Method Create a new local HTML file with just the links, for example: <a href="http://podcast.cbc.ca/mp3/sundayeditionstream_20081125_9524.mp3">Sunday Edition 25Nov2008</a> Open the file in the browser, right click the link and File Save Link As. 2. The Super User Method Install the Firefox addin Iget. (Be sure to use the right version for your Firefox version.) Tools Downloads Enter URL in the field. Are there any other ways?

    Read the article

  • Lighttpd domain redirection

    - by HTF
    I would like to redirect domains on HTTP/HTTPS: http://old.com -> https://new.com https://old.com -> https://new.com I have to specify the SSL key/certificate for the old domain but I'm not sure where I have to place these directives: $SERVER["socket"] == ":443" { ssl.engine = "enable" ssl.pemfile = "/etc/pki/tls/private/new.com.pem" ssl.ca-file = "/etc/pki/tls/certs/new.com.crt" } $SERVER["socket"] == ":80" { $HTTP["host"] =~ "old.com|new.com" { url.redirect = ( "^/(.*)" => "https://new.com:443/$1" ) } } I was trying to add the code below but Lighttpd reports configuration errors: $SERVER["socket"] == ":443" { $HTTP["host"] =~ "old.com" { url.redirect = ( "^/(.*)" => "https://new.com:443/$1" ) } ssl.engine = "enable" ssl.pemfile = "/etc/pki/tls/private/old.com.pem" ssl.ca-file = "/etc/pki/tls/certs/old.com.crt" }

    Read the article

  • Safari 7 SSL error if using IP-adress

    - by K. Biermann
    I have created my own CA for internal usage and set the root certificate to trustworthy on my machines. With this CA I signed the SSL-certificates for my internal servers. I only address them with their IP and so I used the servers' IP as certificate name. If i connect to the Servers with Chrome or mobile Safari it works without problems, but if I use Safari 7 under Mavericks (on the same machine with the same keychain) i get the following error: "The certificate is not valid (host name mismatch)". I double checked that I entered the correct IP ("https://192.168.2.130"), but I always get the same error. Do I need to enter a different name for the certificate or is it just that Safari doesn't support SSL certificates for IPs? Here is a screenshot of the error message (I can only post images with at least 10 rep): Safari's error message Thanks in advantage and please excuse my bad English :D

    Read the article

  • mod hosts file, connect to joomla on remote server

    - by Kate
    I've just acquired an account on a remote server with Joomla installed. I was instructed to add xxx.xx.xxx.xx name.ca www.name.ca to the hosts file which I found in /private/etc/ . I had to su to my admin account and use sudo to mod file and found that hosts is also found in /etc/ though it is apparently the same file. I attempted to flush the the DNS cache using dscacheutil -flushcache and then launched Safari and entered address xxx.xx.xxx.xx/administrator but got a 404 error. Joomla was set up for me by the server owner and accessed from his Windows laptop to demonstrate so I know it should work but no go here. Can anyone suggest what the problem might be?

    Read the article

  • CSMA between APs in same channel & different SSID ?

    - by Ranganathan
    Would be great if someone clarifies this doubt. Lets assume two Wireless Access Points AP1 & AP2 with these conditions 1. both in the same 802.11 standard 2. same channel 3. using different SSIDs (just like in adjacent apartment houses). In this case, do these two Access points (and the clients associated to them) coordinate via CSMA/CA ? ie., if one of the AP's or a client station is about to transmit, does it wait & observe the other AP's & its clients' transmission before sending the frame in air ? Also, do the clients associated with these different APs coordinate via CSMA/CA ?

    Read the article

  • redirecting HTTPS requests to http in lighttpd

    - by chochim
    I have a lighttpd server running which has an SSL certificate installed. I would, due to certain reasons, like to forward all https: //www. requests to http: //www. My lighttpd code looks like as follows: $SERVER["socket"] == ":443" { ssl.engine = "enable" ssl.pemfile = "/path/to/pem/file" ssl.ca-file = "/path/to/ca/file" HTTP["host"] =~ "^www\.(.*)$" { url.redirect = ("^/(.*)" => "http://www.%1$1") } } Can you please point out the problem here. Another thing, what is the difference between %1 and $1 ?

    Read the article

  • Web map services displaying poorly

    - by user29261
    Web map services no longer display correctly in ArcGIS and Google Earth - no one else on network is experiencing these. Using windows 7 OS. These problem began abruptly (1 day they were working, the next they were not). Specific problems include not displaying at all; correct display on 10% of the monitor and repeating lines of coloured squiggles and text on the remaining 90%; and small, widely spaced, pixels in place of colour fill. Links where this occurs: arcgis http://wms.ess-ws.nrcan.gc.ca/wms/toporama_en Google earth http://openmaps.gov.bc.ca/kml/BCGov_Web_Map_Library.kml I can't pinpoint any changes to the computer setup which may have prompted this, however, adding arcgis 10.1 SP 1 occured around the same time. Probably just a coincidence. Anyone had similar problems? or solutions to these? Thanks for any thoughts. Jim

    Read the article

  • mirror sql server 2008 to AWS instance from our datacenter?

    - by Alex
    We are currenlty running on hosted pos system locally and would like to mirror to AWS. We are new to AWS and would like to know the most cost effective way to do this? We have 2 DB and 2 web servers right now in one cabinet in CA. One tape drive, one firewall, one SNA. We are thinking to replicate our system in AWS (using sql server 2008) and just mirror both systems and use a witness server between them to keep the data in sync? The goal is, if CA datacenter goes down, AWS keeps running. User see no downtime. All data is synced. Is anyone doing something similar? Would this be practical to just use AWS in this fashion? Thanks

    Read the article

  • Multiple viewport problem

    - by PSilo
    I'm setting up so I can switch between either one or four viewports but I got some trouble. In my bottom right viewport I got camera view, the same camera that I can switch to full view on. The other three viewports are working with fixed locations but the bottom right viewport is compressed on the y scale and half of the picture on the x scale is missing. void display(int what) { if(what==5){glViewport(0, 0, w, h); glMatrixMode(GL_MODELVIEW); glLoadIdentity(); ca.lookAt();} if(what==1){glViewport(0, 0, w/2, h/2); glMatrixMode(GL_MODELVIEW); glLoadIdentity(); gluLookAt(75,15,-5,0,5,-5,0,1,0);} if(what==2){glViewport(w/2, h/2, w, h); glMatrixMode(GL_MODELVIEW); glLoadIdentity(); gluLookAt(0,110,0,20,0,20,1,0,0);} if(what==3){glViewport(w/2, 0, w, h/2); glMatrixMode(GL_PROJECTION); glLoadIdentity(); gluPerspective(45.0f, float(320) / float(240), 0.1f, 100.0f); glMatrixMode(GL_MODELVIEW); glLoadIdentity(); ca.lookAt();} if(what==4){glViewport(0, h/2, w/2, h); glMatrixMode(GL_MODELVIEW); glLoadIdentity(); gluLookAt(185,75,25,0,28,0,0,1,0);} //glMatrixMode(GL_MODELVIEW); //glLoadIdentity(); ////gluLookAt(cos(shared.time) * shared.distance, 10, sin(shared.time) * shared.distance, 0, 0, 0, 0, 1, 0); // Roterar kameran kring origo genom att skapa en ny vymatris varje bildruta ////ca.orbitYaw(0.05); //ca.lookAt(); glClearColor(0, 0, 0, 1); glClear(GL_COLOR_BUFFER_BIT|GL_DEPTH_BUFFER_BIT); drawScene(); drawCamera(); glutSwapBuffers(); } void viewport(){ glEnable(GL_SCISSOR_TEST); if(!divided_view_port) { glViewport(0, 0, w, h); glScissor(0,0,640,480); glMatrixMode(GL_PROJECTION); glLoadIdentity(); gluPerspective(45.0f, w / h, 0.1f, 100.0f); display(5); } else { ////////////////////// bottom left - working glViewport(0, 0, w/2, h/2); glScissor(0,0,w/2,h/2); glMatrixMode(GL_PROJECTION); glLoadIdentity(); gluPerspective(45.0f, w / h, 0.1f, 300.0f); display(1); ////////////////////// ////////////////////// top right - working glViewport(w/2, h/2, w, h); glScissor(w/2,h/2,w,h); glMatrixMode(GL_PROJECTION); glLoadIdentity(); gluPerspective(45.0f, w / h, 0.1f, 300.0f); display(2); ////////////////////// ////////////////////// bottom right -working glViewport(w/2, 0, w, h/2); glScissor(w/2,0,w,h/2); glMatrixMode(GL_PROJECTION); glLoadIdentity(); gluPerspective(45.0f, w / h, 0.1f, 300.0f); display(3); //////////////////////// ////////////////////////// top left glViewport(0, h/2, w/2, h); glScissor(0,h/2,w/2,h); glMatrixMode(GL_PROJECTION); glLoadIdentity(); gluPerspective(45.0f, w / h, 0.1f, 300.0f); display(4); /////////////////////////// } glDisable(GL_SCISSOR_TEST); glMatrixMode(GL_MODELVIEW); }

    Read the article

  • iPhone development: pointer being freed was not allocated

    - by w4nderlust
    Hello, i got this message from the debugger: Pixture(1257,0xa0610500) malloc: *** error for object 0x21a8000: pointer being freed was not allocated *** set a breakpoint in malloc_error_break to debug so i did a bit of tracing and got: (gdb) shell malloc_history 1257 0x21a8000 ALLOC 0x2196a00-0x21a89ff [size=73728]: thread_a0610500 |start | main | UIApplicationMain | GSEventRun | GSEventRunModal | CFRunLoopRunInMode | CFRunLoopRunSpecific | __CFRunLoopDoObservers | CA::Transaction::observer_callback(__CFRunLoopObserver*, unsigned long, void*) | CA::Transaction::commit() | CA::Context::commit_transaction(CA::Transaction*) | CALayerDisplayIfNeeded | -[CALayer _display] | CABackingStoreUpdate | backing_callback(CGContext*, void*) | -[CALayer drawInContext:] | -[UIView(CALayerDelegate) drawLayer:inContext:] | -[AvatarView drawRect:] | -[AvatarView overlayPNG:] | +[UIImageUtility createMaskOf:] | UIGraphicsGetImageFromCurrentImageContext | CGBitmapContextCreateImage | create_bitmap_data_provider | malloc | malloc_zone_malloc and i really can't understand what i am doing wrong. here's the code of the [UIImageUtility createMaskOf:] function: + (UIImage *)createMaskOf:(UIImage *)source { CGRect rect = CGRectMake(0, 0, source.size.width, source.size.height); UIGraphicsBeginImageContext(CGSizeMake(source.size.width, source.size.height)); CGContextRef context = UIGraphicsGetCurrentContext(); CGContextTranslateCTM(context, 0, source.size.height); CGContextScaleCTM(context, 1.0, -1.0); UIImage *original = [self createGrayCopy:source]; CGContextRef context2 = CGBitmapContextCreate(NULL, source.size.width, source.size.height, 8, 4 * source.size.width, CGColorSpaceCreateDeviceRGB(), kCGImageAlphaNoneSkipLast); CGContextDrawImage(context2, CGRectMake(0, 0, source.size.width, source.size.height), original.CGImage); CGImageRef unmasked = CGBitmapContextCreateImage(context2); const float myMaskingColorsFrameColor[6] = { 1,256,1,256,1,256 }; CGImageRef mask = CGImageCreateWithMaskingColors(unmasked, myMaskingColorsFrameColor); CGContextSetRGBFillColor (context, 256,256,256, 1); CGContextFillRect(context, rect); CGContextDrawImage(context, rect, mask); UIImage *whiteMasked = UIGraphicsGetImageFromCurrentImageContext(); UIGraphicsEndImageContext(); return whiteMasked; } the other custom function called before that is the following: - (UIImage *)overlayPNG:(SinglePart *)sp { NSLog([sp description]); // Rect and context setup CGRect rect = CGRectMake(0, 0, sp.image.size.width, sp.image.size.height); NSLog(@"%f x %f", sp.image.size.width, sp.image.size.height); // Create an image of a color filled rectangle UIImage *baseColor = nil; if (sp.hasOwnColor) { baseColor = [UIImageUtility imageWithRect:rect ofColor:sp.color]; } else { SinglePart *facePart = [editingAvatar.face.partList objectAtIndex:0]; baseColor = [UIImageUtility imageWithRect:rect ofColor:facePart.color]; } // Crete the mask of the layer UIImage *mask = [UIImageUtility createMaskOf:sp.image]; mask = [UIImageUtility createGrayCopy:mask]; // Create a new context for merging the overlay and a mask of the layer UIGraphicsBeginImageContext(CGSizeMake(sp.image.size.width, sp.image.size.height)); CGContextRef context2 = UIGraphicsGetCurrentContext(); // Adjust the coordinate system so that the origin // is in the lower left corner of the view and the // y axis points up CGContextTranslateCTM(context2, 0, sp.image.size.height); CGContextScaleCTM(context2, 1.0, -1.0); // Create masked overlay color layer CGImageRef MaskedImage = CGImageCreateWithMask (baseColor.CGImage, mask.CGImage); // Draw the base color layer CGContextDrawImage(context2, rect, MaskedImage); // Get the result of the masking UIImage* overlayMasked = UIGraphicsGetImageFromCurrentImageContext(); UIGraphicsEndImageContext(); UIGraphicsBeginImageContext(CGSizeMake(sp.image.size.width, sp.image.size.height)); CGContextRef context = UIGraphicsGetCurrentContext(); // Adjust the coordinate system so that the origin // is in the lower left corner of the view and the // y axis points up CGContextTranslateCTM(context, 0, sp.image.size.height); CGContextScaleCTM(context, 1.0, -1.0); // Get the result of the blending of the masked overlay and the base image CGContextDrawImage(context, rect, overlayMasked.CGImage); // Set the blend mode for the next drawn image CGContextSetBlendMode(context, kCGBlendModeOverlay); // Component image drawn CGContextDrawImage(context, rect, sp.image.CGImage); UIImage* blendedImage = UIGraphicsGetImageFromCurrentImageContext(); UIGraphicsEndImageContext(); CGImageRelease(MaskedImage); return blendedImage; }

    Read the article

  • Hello Operator, My Switch Is Bored

    - by Paul White
    This is a post for T-SQL Tuesday #43 hosted by my good friend Rob Farley. The topic this month is Plan Operators. I haven’t taken part in T-SQL Tuesday before, but I do like to write about execution plans, so this seemed like a good time to start. This post is in two parts. The first part is primarily an excuse to use a pretty bad play on words in the title of this blog post (if you’re too young to know what a telephone operator or a switchboard is, I hate you). The second part of the post looks at an invisible query plan operator (so to speak). 1. My Switch Is Bored Allow me to present the rare and interesting execution plan operator, Switch: Books Online has this to say about Switch: Following that description, I had a go at producing a Fast Forward Cursor plan that used the TOP operator, but had no luck. That may be due to my lack of skill with cursors, I’m not too sure. The only application of Switch in SQL Server 2012 that I am familiar with requires a local partitioned view: CREATE TABLE dbo.T1 (c1 int NOT NULL CHECK (c1 BETWEEN 00 AND 24)); CREATE TABLE dbo.T2 (c1 int NOT NULL CHECK (c1 BETWEEN 25 AND 49)); CREATE TABLE dbo.T3 (c1 int NOT NULL CHECK (c1 BETWEEN 50 AND 74)); CREATE TABLE dbo.T4 (c1 int NOT NULL CHECK (c1 BETWEEN 75 AND 99)); GO CREATE VIEW V1 AS SELECT c1 FROM dbo.T1 UNION ALL SELECT c1 FROM dbo.T2 UNION ALL SELECT c1 FROM dbo.T3 UNION ALL SELECT c1 FROM dbo.T4; Not only that, but it needs an updatable local partitioned view. We’ll need some primary keys to meet that requirement: ALTER TABLE dbo.T1 ADD CONSTRAINT PK_T1 PRIMARY KEY (c1);   ALTER TABLE dbo.T2 ADD CONSTRAINT PK_T2 PRIMARY KEY (c1);   ALTER TABLE dbo.T3 ADD CONSTRAINT PK_T3 PRIMARY KEY (c1);   ALTER TABLE dbo.T4 ADD CONSTRAINT PK_T4 PRIMARY KEY (c1); We also need an INSERT statement that references the view. Even more specifically, to see a Switch operator, we need to perform a single-row insert (multi-row inserts use a different plan shape): INSERT dbo.V1 (c1) VALUES (1); And now…the execution plan: The Constant Scan manufactures a single row with no columns. The Compute Scalar works out which partition of the view the new value should go in. The Assert checks that the computed partition number is not null (if it is, an error is returned). The Nested Loops Join executes exactly once, with the partition id as an outer reference (correlated parameter). The Switch operator checks the value of the parameter and executes the corresponding input only. If the partition id is 0, the uppermost Clustered Index Insert is executed, adding a row to table T1. If the partition id is 1, the next lower Clustered Index Insert is executed, adding a row to table T2…and so on. In case you were wondering, here’s a query and execution plan for a multi-row insert to the view: INSERT dbo.V1 (c1) VALUES (1), (2); Yuck! An Eager Table Spool and four Filters! I prefer the Switch plan. My guess is that almost all the old strategies that used a Switch operator have been replaced over time, using things like a regular Concatenation Union All combined with Start-Up Filters on its inputs. Other new (relative to the Switch operator) features like table partitioning have specific execution plan support that doesn’t need the Switch operator either. This feels like a bit of a shame, but perhaps it is just nostalgia on my part, it’s hard to know. Please do let me know if you encounter a query that can still use the Switch operator in 2012 – it must be very bored if this is the only possible modern usage! 2. Invisible Plan Operators The second part of this post uses an example based on a question Dave Ballantyne asked using the SQL Sentry Plan Explorer plan upload facility. If you haven’t tried that yet, make sure you’re on the latest version of the (free) Plan Explorer software, and then click the Post to SQLPerformance.com button. That will create a site question with the query plan attached (which can be anonymized if the plan contains sensitive information). Aaron Bertrand and I keep a close eye on questions there, so if you have ever wanted to ask a query plan question of either of us, that’s a good way to do it. The problem The issue I want to talk about revolves around a query issued against a calendar table. The script below creates a simplified version and adds 100 years of per-day information to it: USE tempdb; GO CREATE TABLE dbo.Calendar ( dt date NOT NULL, isWeekday bit NOT NULL, theYear smallint NOT NULL,   CONSTRAINT PK__dbo_Calendar_dt PRIMARY KEY CLUSTERED (dt) ); GO -- Monday is the first day of the week for me SET DATEFIRST 1;   -- Add 100 years of data INSERT dbo.Calendar WITH (TABLOCKX) (dt, isWeekday, theYear) SELECT CA.dt, isWeekday = CASE WHEN DATEPART(WEEKDAY, CA.dt) IN (6, 7) THEN 0 ELSE 1 END, theYear = YEAR(CA.dt) FROM Sandpit.dbo.Numbers AS N CROSS APPLY ( VALUES (DATEADD(DAY, N.n - 1, CONVERT(date, '01 Jan 2000', 113))) ) AS CA (dt) WHERE N.n BETWEEN 1 AND 36525; The following query counts the number of weekend days in 2013: SELECT Days = COUNT_BIG(*) FROM dbo.Calendar AS C WHERE theYear = 2013 AND isWeekday = 0; It returns the correct result (104) using the following execution plan: The query optimizer has managed to estimate the number of rows returned from the table exactly, based purely on the default statistics created separately on the two columns referenced in the query’s WHERE clause. (Well, almost exactly, the unrounded estimate is 104.289 rows.) There is already an invisible operator in this query plan – a Filter operator used to apply the WHERE clause predicates. We can see it by re-running the query with the enormously useful (but undocumented) trace flag 9130 enabled: Now we can see the full picture. The whole table is scanned, returning all 36,525 rows, before the Filter narrows that down to just the 104 we want. Without the trace flag, the Filter is incorporated in the Clustered Index Scan as a residual predicate. It is a little bit more efficient than using a separate operator, but residual predicates are still something you will want to avoid where possible. The estimates are still spot on though: Anyway, looking to improve the performance of this query, Dave added the following filtered index to the Calendar table: CREATE NONCLUSTERED INDEX Weekends ON dbo.Calendar(theYear) WHERE isWeekday = 0; The original query now produces a much more efficient plan: Unfortunately, the estimated number of rows produced by the seek is now wrong (365 instead of 104): What’s going on? The estimate was spot on before we added the index! Explanation You might want to grab a coffee for this bit. Using another trace flag or two (8606 and 8612) we can see that the cardinality estimates were exactly right initially: The highlighted information shows the initial cardinality estimates for the base table (36,525 rows), the result of applying the two relational selects in our WHERE clause (104 rows), and after performing the COUNT_BIG(*) group by aggregate (1 row). All of these are correct, but that was before cost-based optimization got involved :) Cost-based optimization When cost-based optimization starts up, the logical tree above is copied into a structure (the ‘memo’) that has one group per logical operation (roughly speaking). The logical read of the base table (LogOp_Get) ends up in group 7; the two predicates (LogOp_Select) end up in group 8 (with the details of the selections in subgroups 0-6). These two groups still have the correct cardinalities as trace flag 8608 output (initial memo contents) shows: During cost-based optimization, a rule called SelToIdxStrategy runs on group 8. It’s job is to match logical selections to indexable expressions (SARGs). It successfully matches the selections (theYear = 2013, is Weekday = 0) to the filtered index, and writes a new alternative into the memo structure. The new alternative is entered into group 8 as option 1 (option 0 was the original LogOp_Select): The new alternative is to do nothing (PhyOp_NOP = no operation), but to instead follow the new logical instructions listed below the NOP. The LogOp_GetIdx (full read of an index) goes into group 21, and the LogOp_SelectIdx (selection on an index) is placed in group 22, operating on the result of group 21. The definition of the comparison ‘the Year = 2013’ (ScaOp_Comp downwards) was already present in the memo starting at group 2, so no new memo groups are created for that. New Cardinality Estimates The new memo groups require two new cardinality estimates to be derived. First, LogOp_Idx (full read of the index) gets a predicted cardinality of 10,436. This number comes from the filtered index statistics: DBCC SHOW_STATISTICS (Calendar, Weekends) WITH STAT_HEADER; The second new cardinality derivation is for the LogOp_SelectIdx applying the predicate (theYear = 2013). To get a number for this, the cardinality estimator uses statistics for the column ‘theYear’, producing an estimate of 365 rows (there are 365 days in 2013!): DBCC SHOW_STATISTICS (Calendar, theYear) WITH HISTOGRAM; This is where the mistake happens. Cardinality estimation should have used the filtered index statistics here, to get an estimate of 104 rows: DBCC SHOW_STATISTICS (Calendar, Weekends) WITH HISTOGRAM; Unfortunately, the logic has lost sight of the link between the read of the filtered index (LogOp_GetIdx) in group 22, and the selection on that index (LogOp_SelectIdx) that it is deriving a cardinality estimate for, in group 21. The correct cardinality estimate (104 rows) is still present in the memo, attached to group 8, but that group now has a PhyOp_NOP implementation. Skipping over the rest of cost-based optimization (in a belated attempt at brevity) we can see the optimizer’s final output using trace flag 8607: This output shows the (incorrect, but understandable) 365 row estimate for the index range operation, and the correct 104 estimate still attached to its PhyOp_NOP. This tree still has to go through a few post-optimizer rewrites and ‘copy out’ from the memo structure into a tree suitable for the execution engine. One step in this process removes PhyOp_NOP, discarding its 104-row cardinality estimate as it does so. To finish this section on a more positive note, consider what happens if we add an OVER clause to the query aggregate. This isn’t intended to be a ‘fix’ of any sort, I just want to show you that the 104 estimate can survive and be used if later cardinality estimation needs it: SELECT Days = COUNT_BIG(*) OVER () FROM dbo.Calendar AS C WHERE theYear = 2013 AND isWeekday = 0; The estimated execution plan is: Note the 365 estimate at the Index Seek, but the 104 lives again at the Segment! We can imagine the lost predicate ‘isWeekday = 0’ as sitting between the seek and the segment in an invisible Filter operator that drops the estimate from 365 to 104. Even though the NOP group is removed after optimization (so we don’t see it in the execution plan) bear in mind that all cost-based choices were made with the 104-row memo group present, so although things look a bit odd, it shouldn’t affect the optimizer’s plan selection. I should also mention that we can work around the estimation issue by including the index’s filtering columns in the index key: CREATE NONCLUSTERED INDEX Weekends ON dbo.Calendar(theYear, isWeekday) WHERE isWeekday = 0 WITH (DROP_EXISTING = ON); There are some downsides to doing this, including that changes to the isWeekday column may now require Halloween Protection, but that is unlikely to be a big problem for a static calendar table ;)  With the updated index in place, the original query produces an execution plan with the correct cardinality estimation showing at the Index Seek: That’s all for today, remember to let me know about any Switch plans you come across on a modern instance of SQL Server! Finally, here are some other posts of mine that cover other plan operators: Segment and Sequence Project Common Subexpression Spools Why Plan Operators Run Backwards Row Goals and the Top Operator Hash Match Flow Distinct Top N Sort Index Spools and Page Splits Singleton and Range Seeks Bitmaps Hash Join Performance Compute Scalar © 2013 Paul White – All Rights Reserved Twitter: @SQL_Kiwi

    Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >