Search Results

Search found 800 results on 32 pages for 'indicator'.

Page 20/32 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

• Network Issues only on one network with a Broadcom BCM4312

  - by Ryan McClure

  My Ubuntu 11.10 laptop is having network connection issues...only on one network. I have a BCM4312 card and I'm using the proprietary driver. Whenever I connect to a network over wireless connection, I have no trouble except for one network. In my dorm, if I try to connect to the wireless network, it stays connected from anywhere to 30 seconds to 30 minutes before it will still be "connected" according to the indicator but there is no incoming/outgoing internet connection. This only happens in this building. Other networks with the same name at other buildings on my campus have no issue whatsoever. I took it to the tech department here and they keep claiming it's my laptop; but, if I can connect to other networks with absolutely no issues, why can't my laptop connect here? So, here's my question: Is it my laptop, or is it the network? As a side note, no one else that I know has issues on this network but one; she's running Windows 7 and I forget what kind of laptop it is. One of the people in my hall runs Ubuntu 12.04 and has no problem with the wireless. What do you all think of this?

  Read the article

• PowerBroker (Likewise-Open) + Ubuntu 13.04 -> 13.10 Upgrade

  - by JoBu1324

  I just upgraded Ubuntu from 13.04 to 13.10, and now I can't log into Active Directory; my system is integrated using PowerBroker Identity Services (PBIS), which used to be called Likewise-Open. So far I have identified the following symptoms: I am able to log in with my credentials via ssh. The screen goes black when attempting log into my account via the login screen. I've tried leaving the domain, purging PBIS, and re-installing the latest version of PBIS. I've been trying the troubleshooting section I found here, but I haven't had any success. The relevant portion of the auth.log Oct 22 09:30:26 mypc lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "myusername" Oct 22 09:30:29 mypc lightdm: pam_unix(lightdm-greeter:session): session closed for user lightdm Oct 22 09:30:29 mypc lightdm: pam_unix(lightdm:session): session opened for user myusername by (uid=0) Oct 22 09:30:29 mypc lightdm: pam_unix(lightdm:session): session closed for user myusername Oct 22 09:30:30 mypc lightdm: pam_unix(lightdm-greeter:session): session opened for user lightdm by (uid=0) Oct 22 09:30:30 mypc systemd-logind[718]: New session c5 of user lightdm. Oct 22 09:30:30 mypc lightdm: pam_ck_connector(lightdm-greeter:session): nox11 mode, ignoring PAM_TTY :1 Oct 22 09:30:31 mypc dbus[535]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.129" (uid=110 pid=5139 comm="/usr/lib/x86_64-linux-gnu/indicator-keyboard-servi") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.39" (uid=0 pid=2024 comm="/usr/sbin/console-kit-daemon --no-daemon ") My .xsession-errors log Script for ibus started at run_im. Script for auto started at run_im. Script for default started at run_im. /usr/sbin/lightdm-session: 5: exec: init: not found

  Read the article

• RAM caching causes severe performance drops

  - by B T

  I have read plenty of threads on memory caching and the standard response of "large cache is good, it shouldn't effect performance", "the kernel knows best". I have recently upgraded from 12.04 to 12.10 and changed from VirtualBox to VMware Workstation and the performance differences are severe (I suspect it is because of the latter). When I am running my virtual machine the system load monitor graph shows less than 50% memory usage generally. System load indicator is showing me that the rest of my RAM is used in the cache all the time. Plain and simple this is the comparison: BEFORE Cache was very sparingly used, pretty much none of my memory usage was the cache Swappiness was 0 (caused my memory to be used first, then swap only if needed) Performance was quite good and logical RAM was used fully first, caching was minimal. I could run enough software to utilize my full 4GB of RAM without any performance degradation whatsoever Swap space was then used as needed which was obviously slower (I am on a HDD) but was still usable when the current program was loaded into memory AFTER Cache is used to fill the full 4GB as soon as my virtual machine is run Swappiness is 0 (same behaviour as before but cache uses full memory straight away) Performance is terrible and unusable while running Ubuntu software Basic things like changing windows takes 2 minutes + Changing screens happens frame by frame over sometimes up to 5 minutes Cannot run an IDE and VM like I could with ease before So basically, any suggestions on how to take my performance back to how it was before while keeping my current setup? My suspicion is VMWare is the problem, but how do I see what is tied to the use of the cache? Surely there is a way to control this behaviour in software as polished as VMware? Thanks EDIT: Could also be important to note that the behaviour differs depending on whether VMware is open or closed. If VMware is open, then the ram will lock at like 50% and 50% cache and go into the complete lock up mentioned above. Contrastingly, if VMware is closed (after being open), then the RAM will continue to rise as it needs / cache will stay as the complete remaining memory and there is no noticeable performance degradation.

  Read the article

• How do I stop ubuntu from detaching minimize/maximuze/close buttons?

  - by Shahbaz

  Some time ago I managed to get ubuntu to keep the window menubars in the menu rather than the bar above (I'm not sure if this part is unity or compiz, or what's the difference). That was by removing indicator-appmenu Anyway, so now everything is fine except one thing: If I have a window that is full screen, the minimize/maximize/close buttons are still grabbed by the bar on the top. Usually this doesn't cause a problem because the upper-left corner of the full screen window and the whole screen are not too far apart. However, one thing happens to me a lot, and that is I am working on something (programming), then I need to check some things from other places so I open some windows, see what I want and switch back to my work. Those windows however are temporary so at some point I want to close them. Now here's what happens: I have the focus on some window and I can't close the maximized window behind it unless I click on the window first, so that the buttons appear and then close it. I couldn't find anything on the internet about this. Is this something that's hardcoded in unity/compiz/whatever or is there actually a way to configure this?

  Read the article

• How to change circular icon to indicate chosen session in unity-greeter?

  - by Chan-Ho Suh

  In Precise (12.04), when I login to lightdm, using the unity-greeter, there's a white circle by my name. For the standard DEs like Unity or XFCE, the circle has a representative icon (Ubuntu symbol or little mouse resp.). I have a session for Awesome window manager which was added when I installed Awesome, but it just shows a blank white circle. I'd like to know how to add an icon to it, or at least some indicator, as unity-greeter doesn't show you what session is set until you click on the circle. I found another question about changing the session names. The answer for it said to change the names in the desktop files in /usr/share/xsessions. Unfortunately, while there is an icon field in those desktop files, they are all blank (Caveat: I no longer have Unity installed, so maybe the Unity one would not be blank. But the Xubuntu desktop file has it blank even though the icon shows in unity-greeter). Update: Here's the png I use as a badge for Awesome. It's not great, but looks reasonably nice: []

  Read the article

• LDAP for privilege control?

  - by neoice

  I've been wondering for a while if LDAP can be used to control user privileges. For example, if I have UNIX and web logins, is there an easy way to grant a user access to just or just UNIX (or even both?) My current attempt at solving this very problem was to create 'login' and 'nologin' groups, but this doesn't seem fine-grained enough to meet the ideas I have in my head. I'm also still in the situation where all UNIX users are web users, which isn't a problem so much as an indicator of the limitations. Does anyone have any input on this? Has this problem already been solved?

  Read the article

• UPDATE MANAGER UNABLE TO UPDATE

  - by muguro

  Requires installation of untrusted packages The action would require the installation of packages from not authenticated sources. i get this error every time i try updating. the system shows that it has 466 updates but fails after clicking update more details have this accountsservice apparmor apport apport-gtk apt apt-transport-https apt-utils aptdaemon aptdaemon-data at-spi2-core bamfdaemon base-files bcmwl-kernel-source bind9-host compiz compiz-core compiz-gnome compiz-plugins-default cron cups cups-bsd cups-client cups-common cups-filters cups-ppdc dbus dbus-x11 dconf-gsettings-backend dconf-service desktop-file-utils dmsetup dnsutils empathy empathy-common eog evince evince-common evolution-data-server evolution-data-server-common firefox firefox-globalmenu firefox-gnome-support firefox-locale-en fontconfig fontconfig-config fonts-liberation fonts-opensymbol foomatic-filters gcalctool gdb ghostscript ghostscript-cups ghostscript-x ginn gir1.2-atspi-2.0 gir1.2-dbusmenu-glib-0.4 gir1.2-dbusmenu-gtk-0.4 gir1.2-gst-plugins-base-0.10 gir1.2-gtk-3.0 gir1.2-gtksource-3.0 gir1.2-gudev-1.0 gir1.2-javascriptcoregtk-3.0 gir1.2-launchpad-integration-3.0 gir1.2-pango-1.0 gir1.2-rb-3.0 gir1.2-totem-1.0 gir1.2-ubuntuoneui-3.0 gir1.2-unity-5.0 gir1.2-webkit-3.0 glib-networking glib-networking-common glib-networking-services gnome-accessibility-themes gnome-control-center gnome-control-center-data gnome-desktop3-data gnome-games-data gnome-icon-theme gnome-media gnome-orca gnome-settings-daemon gnome-sudoku gnomine gnupg google-talkplugin gpgv grub-common grub-pc grub-pc-bin grub2-common gstreamer0.10-alsa gstreamer0.10-plugins-base gstreamer0.10-plugins-base-apps gstreamer0.10-x gvfs gvfs-backends gvfs-bin gvfs-common gvfs-daemons gvfs-fuse gvfs-libs gwibber gwibber-service gwibber-service-facebook gwibber-service-identica gwibber-service-twitter hdparm hplip hplip-data indicator-sound initscripts isc-dhcp-client isc-dhcp-common jockey-common jockey-gtk krb5-locales landscape-client-ui-install language-pack-en language-pack-en-base language-pack-gnome-en language-pack-gnome-en-base launchpad-integration libaccountsservice0 libapt-inst1.4 libapt-pkg4.12 libart-2.0-2 libasound2 libatspi2.0-0 libbamf0 libbamf3-0 libbind9-80 libc-bin libc-dev-bin libc6 libc6-dev libcairo-gobject2 libcairo2

  Read the article

• How to view status of software RAID 1 resynching?

  - by tputkonen

  I have two 500 GB disks and yesterday I mirrored first drive to the second one using software RAID 1. PC has now been on for 30 hours. Both disks say "Resynching", but there is no progress indicator. In addition, there is a small yellow exclamation mark on both disks. My questions are: How long could the synch take for 500 GB drive with about 150 GB of data? PC has 4 GBs of RAM and AMD dual core 4000+ Is there a way to monitor status of the synching? How can I check what the exclamation mark means?

  Read the article

• How can I downgrade a system that accidentally had backports installed?

  - by Glyph

  I installed a fresh Ubuntu system. Somehow - possibly through my own error - the backports repository got enabled. Then I did several upgrades. I noticed that this happened when networking suddenly stopped working, "Network Settings" now has an "(alpha)" in the title bar, "System Settings" ? "Network" now displays an error dialog saying "The system network services are not compatible with this version". Now, I've disabled the backports repository, and I'd like to restore my system to its previously-functional state. My question is twofold: How do I determine which packages were installed from backports? Can I automatically re-install all those packages (and purge their configuration) to get back to a sensible state? If the answer to 2 is "no" I can probably manually purge some things and reinstall, but it would be nice to have it handled automatically. Update: It wasn't an update that broke the network; it was apt-get install indicator-network, which installed something called "connman" and removed network-manager and network-manager-gnome. Nevertheless I am leaving the question up, since I am still interested in how I can purge packages from a particular source after accidentally adding that source, and how I can determine which packages were installed from where.

  Read the article

• Visual Studio 2010 Pro Power Tools Screencast

  - by Steve Michelotti

  Microsoft just released the Visual Studio 2010 Pro Power Tools extension and it is awesome. A summary of all the features can be found here and it is available in the Visual Studio Gallery here. There are a bunch of great features but, in my opinion, the best one is the replacement for the Add Reference dialog. This gives sub-string search capabilities as well as the ability to add multiple references without having to continually re-open the dialog. For this feature alone, you should install the Pro Power Tools right now. There are a few blogs posts that do a good job describing all the features but what I wanted to do here was to post a quick screencast (7 minutes) that shows the features that I think are really cool. I show most (but not all) of the features focusing on the ones I think are the best. The features I cover are: Installation with the Extension Manager Add Reference Dialog replacement Tab Well including pinned tabs, pinned tabs in second row, fixed close button, colorized tabs, dirty indicator Highlight current line Triple Click for full-line selection Ctrl + Click for Go To Definition Colorized Parameter Help Enjoy! (Right-click and Zoom to view in full screen)

  Read the article

• How to choose my own filename format for subscribed podcast files?

  - by meomaxy

  I subscribe to several podcasts where the filenames of the downloaded mp3 files have no particular pattern to them. When I copy the directory of accumulated mp3 files into my mp3 player, the files play in alphabetical order. What I really want is to play the files chronologically by release date. I currently use iTunes on Windows XP to download the files. What I do now is manually rename the files, adding the date in YYYYMMDD format to the start of each filename so that an alphabetical listing of files will correspond to their chronological order when I listen to them later in PocketTunes on my Palm Centro. Is there some way to get the release date into the filename automatically? If so, I could automate or possibly skip the file renaming step. I would switch from iTunes to something else if that would solve my problem. The file creation time on my local disk isn't a reliable indicator because sometimes I download a few days worth of content at one time, and the files don't necessarily get downloaded in chronological order.

  Read the article

• Monitoring ASA packet loss via SNMP

  - by dunxd

  I want to monitor packet loss on my ASA 5505 VPN endpoints using SNMP. This is so I can graph the rates in Cacti and/or get alerts in Nagios. However, I am not sure what SNMP values I should use to measure packet loss. In the ASA I can run sh interface Internet stats to show traffic statistics for the interface connected to the Internet. This shows 1 minute and 5 minute drop rates. Are these measures an indicator of packet loss? Are there SNMP values I can access that correspond to those values? Should I be looking at different values? Is the ASA even able to measure packet loss?

  Read the article

• Struggles to connect to network when using WPA with a BCM43225

  - by pst007x

  When booting my laptop, it will try to connect to my wireless network, however a window keeps popping up asking me for my security password, which has already been saved. I have to keep deleting my network settings, and reconnecting, otherwise it keeps failing to connect. My wireless is set up with a WPA, I do not want to lower my security because of this, but it is a pain and can take me 15mins plus to finally connect. The problem has only become apparent since a fresh install of 11.10. IPV6 disabled. System info: 01:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01) Subsystem: Acer Incorporated [ALI] Device 036d Flags: bus master, fast devsel, latency 0, IRQ 43 Memory at b3400000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: tg3 Kernel modules: tg3 02:00.0 Network controller: Broadcom Corporation BCM43225 802.11b/g/n (rev 01) Subsystem: Broadcom Corporation Device 04da Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at b2400000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: brcmsmac Kernel modules: wl, brcmsmac ADDITIONAL: In terminal I get this: pst007x@pst007x-ubuntu64:~$ nm-applet start ** Message: applet now removed from the notification area ** (nm-applet:2816): DEBUG: old state indicates that this was not a disconnect 0 ** Message: using fallback from indicator to GtkStatusIcon ** Message: applet now embedded in the notification area ** Message: No keyring secrets found for Auto Access 01/802-11-wireless-security; asking user. ** (nm-applet:2816): DEBUG: foo_client_state_changed_cb Note this line: ** Message: No keyring secrets found for Auto Access 01/802-11-wireless-security; asking user. At this point is where I am asked for the password. Please report WPA issues with Ubuntu 11.10 here: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/892727

  Read the article

• MySQL Makes The Cover of Oracle Magazine!

  - by bertrand.matthelie(at)oracle.com

  @font-face { font-family: "Arial"; }@font-face { font-family: "Times"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }a:link, span.MsoHyperlink { color: blue; text-decoration: underline; }a:visited, span.MsoHyperlinkFollowed { color: purple; text-decoration: underline; }div.Section1 { page: Section1; } In case you haven't seen it yet, MySQL made the cover of the January/February Edition of Oracle Magazine!   Published 6 times per year and distributed to over half a million of IT managers, DBAs and developers, Oracle Magazine contains technology-strategy articles, sample code, tips, Oracle & partner news, and more.   @font-face { font-family: "Arial"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }div.Section1 { page: Section1; } If you're thinking that this is yet another indicator that Oracle is very serious about MySQL, you're absolutely right!   I encourage you to read David Kelly's "Open For Business" article posted online here.   "First released in 1995 and purchased by Sun in 2008, MySQL has quickly graduated from the realm of hobbyists to the world of business, becoming the leading open source database for many Web applications and an integral part of the LAMP (Linux, Apache, MySQL, PHP) Web application stack. Almost a year after Oracle's acquisition of Sun, MySQL plays an even bigger role in enterprises of all sizes worldwide." ......   Enjoy the article!

  Read the article

• Ubuntu 12.04 Precise on Dell Inspirion Duo

  - by Roman M. Kos

  I installed 12.04 version of Ubuntu on my Dell Inspiron Duo. After installing with help of program like UNetBootIn or smth like that. ( Besides i have no problem with kernel panic on chargin on/off like in 11.10. ) After that i followed with steps from here, in the first post here: http://ubuntuforums.org/showthread.php?t=1658635 There left one big problem with touchscreen: When i whant to drag with touchscreen like i`m doing it with mouse (for ex. selecting multile files with mouse) the selectable rectangular doesnot shows while im dragging, when dragging was finished (i put my finger off) it shows the rectangular and hides it. This thing disables all my tries to drag a window or smth else.... Also some time after using touchscreen such things are disabeling: - Often - click from a mouse (after keyboard using functinality restores) - less often - mouse movement disables (sometimes restores sometimes not) - lesser than other - keyboards works but no sygnals accepting (keyoards has indicator, so thay react, mouse of course not) The test from eTouchU utility passes perfeclty. Any idia for solving this problem? P.S.: Im from Ukraine, so sorry if my possible grammar mistakes. P.P.S.: Besides how to know the physicall position of my tabled mode? For automaticall rotating. Like on each rotation do some script.

  Read the article

• Norton Backup "Failed to Restore"

  - by Teknophilia

  I recently had one of my computers (XP) die on me. I had it's files set to automatically backup to another PC's HD using Norton. I've tried using Norton restore on the second computer to try and restore some files (word documents, pictures), but when I try to do this, I get a dialog box saying that it "Failed to Restore". When I click to continue, it shows a list of the files I tried to restore, along with a status indicator for each file (which says "invalid file"). Any ideas?

  Read the article

• VLC RTP Streaming in FC12

  - by Matt D

  I'm trying to get VLC to work streaming RTP audio/video over my office network. The goal is multicast a/v streaming. In all test cases, we are streaming from VLC to VLC. I am able to stream from Windows to Windows, and from Fedora to Windows, but not from Windows to Fedora. Additionally, I am unable to receive a LOCAL stream from one instance of VLC to another, within Fedora. I don't see any reason why this would be. The buffer indicator (where the elapsed/total time is normally displayed) never shows any connectivity, so it would appear to be a network problem, but since I am able to stream from Fedora to Windows (same IP, same port) I thought it would be something else. Does anyone know of a solution to this issue?

  Read the article

• System speakers not recognized

  - by Kyle Maxwell

  Since upgrading to Xubuntu 13.10, sound has not functioned properly (e.g. screeching when playing Skype notifications). Now, however, it does not function at all. pavucontrol only shows Dummy Output and does not recognize the built-in speakers on my Dell Precision M4600. Possibly related, the sound indicator applet does not come up when I click on it, only showing a small white bar underneath it. I have purged and reinstalled pulseaudio. lspci -v shows: 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) Subsystem: Dell Precision M4600 Flags: bus master, fast devsel, latency 0, IRQ 56 Memory at f2560000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 01:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: Dell Device 14a3 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f0080000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel The "Capabilities: <access denied" line makes me wonder if there's a permissions issue, as the Log Out applet now shows "Restart" and "Shutdown" grayed out. groups shows me in: kmaxwell adm dialout cdrom sudo dip plugdev fuse lpadmin netdev sambashare vboxusers

  Read the article

• Delay before booting with laptop

  - by Priednis

  I have almost the same problem as in Delay before booting? My computer is a practically new (couple months) Lenovo X200 Tablet (System Model 7449FXG). So when I press the power button, the indicator light that means "computer is on" turns on, but nothing else happens for about 5 mins, after that the computer starts booting normally. The same happens also on restart. And no USB or any other device for that matter is plugged in to the computer. And at the delay time the monitor is blank - actually not on at all.

  Read the article

• Re-Calibrate Toshiba battery meter with Windows 7

  - by Farseeker

  Hi All. I have a Toshiba U300 laptop. Back in the olden days (circa-2000) you could re-calibrate the battery meter from the BIOS when your battery was no longer reading accurately. My battery was shot, so I bought a brand new one, however Windows 7 still seems to count down the battery life in at the same speed as the old one did. This time, when it alleged 0%, I turned the laptop back on and got another 90 minutes of life out of it, at 0%. Is there a tool or utility for Toshiba laptops that can fix it back to being accurate? I've read the other threads on SU about cycling the battery but that just doesn't seem to do it in this case. Update: After the last cycle, the battery meter now reads 100% but the indicator on the front of the laptop is still orange (indicating not fully charged)

  Read the article

• Macbook Pro 15-inch replacement battery.

  - by ricbax

  So I've finally got to the 300+ cycles with my MBP 2008's original battery. Apple is pretty much "on the money" too! I am at 79% Health and getting the Condition: Replace Soon warning. So I went out to the closest Apple Store and bought a replacement. I would like to get the same lifespan out of my replacement if possible. My question is: The battery comes with a 2 dot (green) charge on the indicator, should I put the battery in and let it run down and do a full recharge OR begin charging it immediately and then let it run all the way to empty and recharge?

  Read the article

• Netgear Router missing Wireless Configuration Menu Link

  - by ccisystems

  I have a Netgear WiFi router DG834G v3. On it it says it's a WiFi, ADSL 2+ modem, switch, etc. There is an antenna on the back and a WiFi indicator on the front. However, when I connect to it via the web interface, the wireless setup link is missing from the menu. The top label indicates it is a DG834 (without G). I have received it from a friend and was really looking forward to using it but I really need the WiFi part. I looked on Netgear's site as I thought someone must have uploaded the wrong firmware for the device sometime - so I upgraded to the latest firmware, but it still says it's NOT a 'G' device and the wireless menu is nowhere to be found. I'd appreciate a push in the right direction as to what I could do. Is it possible that the WiFi chip is broken or something and the device does not detect it and the firmware reverts the device to a different version?

  Read the article

• BCM2046B1 Bluetooth Dongle connection problem

  - by Andfoy

  Well i have a Blueooth dongle with an BCM2046 IC intrregated, my problem is that when i connect it, Ubuntu recognize it, but it don't work whe i try to scan or scan the PC from other device, i replaced the default Gnome Bluetooth manager and i installed Blueman, but the problem presists. The Bluetooth LED indicator appears to be "working". I'm using 11.10 Oneiric Ocelot hcitool dev: Devices: hci0 89:21:XX:XX:XX:XX lsusb: Bus 002 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Bus 002 Device 004: ID 0a5c:2100 Broadcom Corp. Bluetooth 2.0+eDR dongle hciconfig -a: hci0: Type: BR/EDR Bus: USB BD Address: 89:21:XX:XX:XX:XX ACL MTU: 1017:8 SCO MTU: 64:0 UP RUNNING PSCAN ISCAN RX bytes:1329 acl:0 sco:0 events:40 errors:0 TX bytes:671 acl:0 sco:0 commands:35 errors:0 Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'ubuntu-0' Class: 0x4a0100 Service Classes: Networking, Capturing, Telephony Device Class: Computer, Uncategorized HCI Version: 2.0 (0x3) Revision: 0x4000 LMP Version: 2.0 (0x3) Subversion: 0x430e Manufacturer: Broadcom Corporation (15) Sorry for my English and thanks for any hints.

  Read the article

• Windows 8 BIOS - Boot Ubuntu from External HDD

  - by F3AR3DLEGEND

  My laptop came pre-loaded with Windows 8 64-bit (only storage device is a 128 GB SSD). Since it is my school laptop/I've heard creating a Linux partition alongside Windows 8 is not very wise I installed Ubuntu onto my external hard drive. I have a 500GB external HDD with the following partitions: Main Partition - NFTS - ~400 GB Extension Partition / - ext2 - ~25gb /home - ext2 - ~30gb swap - ext2 - 10gb /boot - ? - 10gb ? = not sure of partition Using the PenDriveLinux installer, I created a LiveUSB version of Ubuntu 12.04 (LTS) on a 4GB USB drive. Using that, I installed Ubuntu onto the external hard-drive, without any errors (or at least none that I was notified of). Using the BIOS settings, I changed the OS-loading order so that it is in this order: My External USB HDD Windows Boot Loader Some other things Therefore, Ubuntu should load from my hard drive first, but it doesn't. Also, my hard drive is in working condition, and it turns on when BIOS starts (there is a light indicator). When I start my laptop, it goes directly to Windows 8 (I have the fast startup setting disabled as well). So, is there any way for me to set it up so that when my HDD is connected, it will automatically load Ubuntu? Thanks in advance!

  Read the article

• how can I see a page's referrer in Chrome?

  - by EmmyS

  I've read the "answers" on this question, which is pretty much what I'm asking, but no one actually provides an answer. Nowhere in the Developer Tools (that I can see, anyway) is there a clear indicator of the current page's referring page. This is something that's really easy to find in Firefox; just right-click and choose Page Info. Where is this functionality in Chrome? If it's in the developer tools, which tab is it under? If it's not, is there an extension I can use to get this info? I've tried the Web Developer extension, and can't seem to find this very basic piece of info there, either.

  Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >