Search Results

Search found 12251 results on 491 pages for 'intel wireless card'.

Page 20/491 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

• SIM card number swap

  - by DaGhostman Dimitrov

  Is it possible to swap two numbers between two sim cards (I am just got an new phone and it is using a micro sim) And I have a old number that I want to use but it is on standart sim card. Is it possible to swap the numbers between the cards using a SIM Card reader. What software and hardware should I use? Note: I have talked with my provider but I have to cancel my old numbers contract but I like it and do not want to pay the remaining period of the contract to turn it in to PayAsYouGo and then swap ..

  Read the article

• Can't connect to wireless on Lubuntu

  - by migwke

  I have a CISCO 802.11b WIFI Mini PCI LAN card in my IBM ThinkPad T30 laptop. Is this wireless card compatible with Lubuntu? I have Lubuntu installed and it just won't connect. It keeps saying that it is trying to configure then it says that it is connected but it does not work. I know that the wireless network is working correctly because I can connect to it with all my other devices and it works on this very same laptop when I am running Windows. I added the following commands to blacklist.conf, but still no luck blacklist padlock_aes blacklist geode_aes

  Read the article

• sd card won't mount when an android phone is connected after 12.10 fresh install

  - by Mysterio

  I just upgraded to 12.10 via a fresh install. Mounting my Xperia Neo V in 12.04 worked flawlessly however I just discovered that the sd card can't be detected and mounted in 12.10. How can I solve this? Thanks in advance. P. S. I can mount it via a card reader though and it mounts ok in Windows 7. So it surely can't be hardware related. EDIT: Sony Ericsson Neo V running Android 2.3.4. USB mass storage is already turned on.

  Read the article

• After upgrading to Ubuntu 12.04, my broadcom wireless sta driver is not working

  - by Nuwan Aluwihare

  I upgraded my HP DV5-1000US Laptop to Ubuntu 12.04. But I cannot get it connected to the Wireless. I went through the settings, Hardware, Additional Drivers and it says that "No proprietary drivers are in use on this system". Also it says "Broadcom STA Wireless Driver" is not activated. I tried to activate it after got my laptop connected to the net through a wired connection, but it says "Sorry, installation of this driver failed. Please have a look at the log file for details: /var/log/jockey.log"

  Read the article

• Internet Timeouts with TP-Link TL-WN821N wireless usb stick - existing solutions dont work

  - by Sheena

  I'm running Ubuntu12.04 and I'm trying to get a TP-Link TL-WN821N to work. The solution from Internet Timeouts with TP-Link TL-WN821N v2 wireless usb stick didn't work for me. Neither has anything else... I've installed rtl8192cu as per instructions I found elsewhere to no avail. The symptoms I am experiencing are: When I plug in the device the PC can see and connect to wireless networks fine. The network I'm using has internet access and the signal strength is pretty strong. I can't ping and I can't browse the internet (timeout). Any ideas? I'm not sure what the next step would be or what information would be useful at this point.

  Read the article

• Wireless Very slow with 13.10 and BCM4313

  - by RyanCheu

  I have a laptop with the BCM4313, and it was working perfectly in Ubuntu 13.04, but I recently upgraded to 13.10 and now my wireless performance is horrible. Initially it didn't work at all, but I removed the wl driver and use the brcmsmac driver instead. Now when I boot up it works at the start, but gets progressively slower. My Android device is reporting 10Mbps down/20Mbps up, but my laptop only gets 1up/down. Does anyone know a solution? I really need my wireless to work, is my best option to just reinstall on 13.04? Thanks!

  Read the article

• 12.04 in Virtualbox is keep losing my wireless connection

  - by Derek

  I've Windows 7 as the Host OS, Ubuntu 12.04 as the guest and a Netgear WG111v2 as the USB Wireless device. Its connected to an open Wi-Fi network at work to bypass my works crazy strict filtering, When on the domain. I currently have network eth0 turned off in the virtualbox settings so the only network source would be through the USB device at wlan1. Its odd but the wireless seems extremely temperamental, I constantly have to ifconfig wlan down then ifconfig wlan1 up to get it back online. I know this might be super vague just curious if anyone has tried something like this or run into anything like it to point me in a direction I might not be seeing.

  Read the article

• Wireless connect- Webcam activation- MBR repair/rebuild

  - by Rick

  Evening: I've NEVER had so much difficulty with Ubuntu. I got "Ubuntu Made Easy" and couldn't believe it hasn't done a damn thing to help solve the problems!!! #1. Since install of 12.04 I haven't been able to connect to wireless. Have done everything I can find/think of. Laptop indicates it's receiving wireless. Ran all updates, restricted extras, etc. NOTHING!! Tried to find how to activate built-in webcam (it worked when I installed O.S.) NOTHING; tried to find MBR repair/rebuild terminal command.. NOTHING!!! The book has has been useless, so far!! I really have to solve these problems, otherwise laptop and UBUNTU are worthless!!! Hope someone can help me out with any or all the problems I've listed. Sure would appreciate it!!!!!!!!!!! (laptop HP 2000-210US) Thanks: Rick

  Read the article

• Newb: First install of ubuntu, no wired or wireless

  - by Ienzo

  Ran 12.04 through a usb drive for a day or so, and had no issues outside of some latency that is more due to the lack of ram on my aspire one D255e than to OS. Had wireless running with no issue, and wired tested as working also. Ran the install and removed windows 7, wireless network is detected but ethernet is not, and neither gets connection. Disabled proprietary driver and rebooted, re-enabled driver and still neither. I know nothing of ubuntu yet! What do? _<

  Read the article

• wireless not showing up in network manager applet.

  - by Vidur Vishnudutt

  there is only the wired connection option available when the menu drops down. i have installed a belkin wireless g card for my desktop. it has been used before on this version of ubuntu 10.10, but after upgrading it shows only wired networks. enable networking and enable notifications have both been ticked. still only wired networks coming. im using ubuntu 10.10 maverick meerkat on my desktop comp and im an absolute begginer at ubuntu. can some one please help me re enable wireless on my comp?

  Read the article

• Can't connect to wireless network in Lubuntu

  - by mike

  I have a CISCO 802.11b WIFI Mini PCI LAN card in my IBM ThinkPad T30 laptop. Is this wireless card compatible with Lubuntu? I ran it off a Live CD and it showed the network I want to connect to – but it just won't connect. I tried installing Lubuntu and during installation it also tried to connect to the same network and still nothing. I know that the wireless network is working correctly because I can connect to it with all my other devices and it works on this very same laptop when I am running Windows.

  Read the article

• 12.04 LTE wireless not working in Dell Insprion E1405

  - by Rey

  i have the windows XP media edition running on my Dell Inspiron E1405 with all the hardware working properly. Recently i wipe out the windows and installed the Ubuntu 12.04 LTE using the CD and the installation process completed successfully but my wireless stopped working after. computer wireless indicator turned off and i can't even do the wired connection as well. it is Broadcom BCM4311 adapter. i tried to download the driver from the dell website but they don't have the Linux version of the driver if its that causing the problem. i appreciate your help that can solve my issue. thank you.

  Read the article

• BCM4313 Wireless on Ubuntu Server 12.04

  - by KJ Tsanaktsidis

  I'm trying to run an old netbook with Broadcom BCM4313 wireless as a print server with Ubuntu Server 12.04. Setting up the wireless without the GUI, however, is proving problematic. I do think however I've narrowed down the problem. I've tried both the wl driver (from bcmwl-kernel-source) as well as the (included) brcmsmac driver. With both of them, when I issue the command iwlist wlan0 scanning (eth1 for wl), I only see neighbouring networks- not my own. I believe this might be because my networks are n-only, but my neighbouring networks are mixed mode (I suspect this because the output of iwlist wlan0 scanning shows "Bit Rates" only as high as 54 Mb/s). Any ideas how to go about getting this thing to connect?

  Read the article

• 3G dongle and memory card detection

  - by user212632

  My questions is about 3G dongle (Huawei E1752) that I use for my internet on Ubuntu 12.04. The big issue is that ubuntu only recognise the dongle if I plug it in before booting up. But if somehow I loses connection (due to network being low) then the only way to use the 3G dongle again is to reboot my machine, which becomes a pain. I have the same issue with the memory card reader of my laptop whereby it only reads when I insert the card before booting up. My laptop is an Acer V3 -571g. At first I thought it was an issue that the model was quite new, but I have been updating my ubuntu for a while, and this issue has kept being the same

  Read the article

• Ubuntu 12.04 wireless does not detect networks

  - by dudeitsdevin90

  I installed Ubuntu on a partition of my MacBook Pro. Wireless connections work fine when I switch to OSX, but the wireless networks are not even detected when I boot Ubuntu. I installed Wicd as a new network manager, but I'm still having the same problem. Ubuntu works on a wired connection though. I have searched the web for a solution... similar questions have been asked but I have not been able to find a way to fix this problem. Any help would be greatly appreciated.

  Read the article

• Still no wireless after b43 with Dell Inspiron 1525 (Ubuntu 12.04)

  - by DanielleN

  So I followed the instructions here http://ubuntuforums.org/showthread.php?t=1974006 about how to solve this issue. It worked for a bit and then stopped. After doing a modprobe I could at least see my network and click on it but it would not connect (I can always see it if I look under the listed wireless networks under VPN Connections, however). I'm thinking, from what I read at least, the issue might be that my wireless switch was on during those first steps. Do I now have to undo the b43 install and do it again? Or is there something else I could try? I just made the switch to Linux yesterday, so I am hesitant at this point to mess with anything on my own. I should note now that it was installed by someone who knows what they are doing, so we are all good on that front.

  Read the article

• Slow internet connection with a Digicom Wireless 11n 300m (rt2800)

  - by beboka8

  After upgrading to ubuntu 11.10 the speed of my internet connection has considerably reduced. I surf on internet using a wireless usb adapter Digicom Wireless 11n 300m which works with rt2800usb driver. The fact is, on the installation cd there's no tracks of that driver but instead of it there is another one called rt2870 which I tried to load using ndiswraper, but it did not recognize any hardware. I'm not sure the solution of my problem is simply changing the driver, but I have no other ideas. Can anyone help me?

  Read the article

• Windows Wireless Drivers - Install

  - by Justin Y.

  I have nearly ended my journey of making a dual-boot windows xp and ubuntu computer. Along with version 12.04, came the problem with my NetGear WNDA3100v2 wireless adapter. It wasn't compatible. My last step in my adventure is to install the software called Windows Wireless Drivers. I have internet access on my laptop and a flash drive. It would be preferable to receive a link to this program, because I see no link on the website, and I can't download it from the Ubuntu Software Center. Thanks.

  Read the article

• Broadcom wireless card disappears after restart

  - by user10854

  I used 'additional drivers' to install 'Broadcom STA wireless driver' and it returns an error. Within jockey.log it says the following numerous times. 2011-02-14 21:24:06,945 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted After it returns the error the network card will work temporarily until I restart the laptop. When I restart I got to go through the procedure again of trying to activate the driver, returns an error however it works temporarily. The network card is as follows on a Dell Inspiron 1545: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] Rev 01 I have been trying to solve this myself for many hours. Any help is appreciated/

  Read the article

• Setting up wireless drivers in Ubuntu 9.10?

  - by xdya

  I've just installed ubuntu to a notebook, deleting the windows xp that was installed before, so now nothing works I couldn't solve the problem of getting the blank screen with the versions 12.. and 10.. so now there is 9.10 installed, which works fine. Well, it boots up at least. I can't get working the drivers though. I'm totally new to linux, and I've read in some forums that in this version you have to install all of them yourself, because the system won't detect them automatically. Therefore I tried to find the drive for my wireless card, but actually I have no clue how to get it work. Could someone please help me out? So here are the specs: System installed as mentioned: Ubuntu 9.10 Computer: Acer Aspire 3100 Wireless according to laptop specs: 10/100 Fast Ethernet, Wake-on-LAN ready, Acer InviLink™ 802.11b/g Wi-Fi CERTIFIED I would really appreciate some detailed description to setting up my internet Thanks!!

  Read the article

• Binding hotkey for toggling wireless card state - System76 Bonp3

  - by user109076

  Recently, my wireless card shut off on my laptop (System76 Bonp3 running Ubuntu 12.04 LTS). Awhile back, my keyboard had a meeting with a cup of coffee, and my F11 key no longer works. The key binding for turning my card back on happens to be Fn + F11, so I cannot turn my wifi on. The only solution I can think of is to somehow change this to be bound to another key. I'm looking for the script that handles this particular hardware switch so I can bind it elsewhere.

  Read the article

• Wireless hardware is not getting switched on in 12.04

  - by user89733

  I have recently installed ubuntu 12.04 in sony vaio VPCEH. And updated all the available updates through update manager. When i switch on the bluetooth/wireless (hardware switch), only the bluetooth is turning on. For wireless, it shows as "hardware disabled". P.S: It was working fine few days before. Suddenly It is not turning on. i just get an answer for this question while googling. just enter the following command in the terminal. "sudo rfkill unblock all" This will unblock all hardware ports. that's it!!!!!! :) It works,..

  Read the article

• Cannot use second display with 12.04 and Intel 2000/3000

  - by Carolyn Marenger

  I am unable to get anything to display on my second monitor, or even get the system to recognize that there is a second screen. I am running Ubuntu 12.04 on a Gigabyte GA-H61M-S2PV, revision 2.0 box. The integrated chipset is an Intel 2000/3000, and there are both a D-Dub and a DVI-D display ports on the MB. This is the first operating system I have installed on this system. I have a second monitor plugged into the DVI-D port via a DVI-D to D-Sub adapter. I cannot verify that the motherboard or adapter were/are working, short of installing windows to test the theory. When I go into the "System Settings - Displays" control window, it shows one display. I have rebooted with the second monitor attached, and I have perused the BIOS settings in case it might have been disabled. So far, I have had no indication that the second monitor is recognized, not even a flicker at power on. If I swap monitors and cables between the DVI-D and D-Dub ports, the other monitor lights up, so I know the monitor and video cable are not the issue. Any suggestions would be appreciated. Thanks, Carolyn

  Read the article

• Less graphics power all the sudden (Intel HD 3000)

  - by queueoverflow

  I have a Intel Sandy Bridge i5 with the HD 3000 graphics card. I used to be able to play Urban Terror and Nexuiz comfortably with 85 and 60 frames per seconds until mid/end of October 2012, the former even on a full HD display with that many frames. Now I have around 30 to 45 on the smaller laptop screen and around 20 to 30 on the external monitor. Did something happen to Kubuntu 12.04 so that it has less graphics performance than previously? Update I looked into the system monitor and could not detect anything being at the maximum. The four CPU cores were pretty much bored, the 8 GB RAM were filled with maybe 2 GB. And I ran intel_cpu_top and did not notice anything at its limit. See the output. after Kernel bisecting I now did a kernel bisect and tried 3.2.0-23, 3.2.0-27, 3.2.0-29 and 3.2.0-30 and all had full graphics power. Interestingly, I then had full power when I just booted back into the regular 3.2.0-32 kernel. This does not make sense to me …

  Read the article

• Newly installed DIR-615 - how to connect to the wireless?

  - by JK123

  I've just installed a D-Link DIR 615, but can't figure out how to connect to the wireless.. When I double click my wireless icon in the tray, it does show the new network. Its starts the "WiFi protected setup wizard" and the first thing it asks for is the "Device Ownership Password". I have no idea what that is - I've tried the PIN and the router password. On the next page it says: SSID: _(name)__ Security type: _wpa2 personal aes ccmp_ Password: _some long key that is not what I entered during router setup_ I change the key to the one I created when setting up the router. I've also tried leaving the key as it is shown in the dialog. But it does not connect either way. All it says is "Configuration failed" So how do I connect to the new wireless network??

  Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >