Search Results

Search found 37348 results on 1494 pages for 'low end hardware'.

Page 20/1494 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

  • HP Pavilion dv5 boots with low brightness and graphics card not recognized

    - by cesar
    My problem is with Ubuntu 11.10 in my notebook hp pavilion dv5 with a graphic Intel(R) hd graphics. When I start Ubuntu my screen is without brightness, I can increase it with my control buttons, but when I restart I don't have brightness again. also Ubuntu doesn't recognize my graphic card (Intel HD (R) graphics), please i need your help because i like Ubuntu and i would like have it in my laptop (HP dv5 2045la) (3GB RAM) (500 GB DISK). PS: I installed the repository MESA and now recognizes my card but my problem with the brightness

    Read the article

  • Low graphic mode after switching to fglrx drivers

    - by MrKenkadze27
    I have another problem on my laptop after trying to fix another issue. So, because of this issue, I wanted to switch to fglrx to fix it and after restart, I got this screen: I went back to terminal and I got rid of this problem by "purge"-ing the fglrx driver and removing it, going back to problem number one. I tried lot of methods to fix this such as this ones but they ether switched back to open-source drivers or didn't helped at all. So would anyone like to help? maybe give some commends to try? My Laptop has 2 GPU, AMD Radeon HD 7650M and Intel(R) HD Graphics 4000. AMD is running always making my laptop too hot. Here's one of the Xorg.5.log file paste, I am sure it will be useful finding my problem. Thanks! Please make answer easy to understand as I am not an expert, this problem is keeping me from being one. Also the AMD driver which can be downloaded from their site doesn't install, it says non compatible graphics card but Ubuntu Software Updater sure installs it.

    Read the article

  • How to Tweak the Low Battery Action On Your Windows 7 Laptop

    - by The Geek
    If you’ve got a netbook with really great battery life, you’ll probably still have loads of time left even with only 10% of the battery remaining. Here’s how to tweak the settings so it alerts you or goes into sleep mode at a more reasonable time. Note: obviously if you don’t have a great battery in your laptop, you should probably be careful with these settings or you might lose data. If anything, you’d be better off making the notifications happen sooner in that case Latest Features How-To Geek ETC The 20 Best How-To Geek Linux Articles of 2010 The 50 Best How-To Geek Windows Articles of 2010 The 20 Best How-To Geek Explainer Topics for 2010 How to Disable Caps Lock Key in Windows 7 or Vista How to Use the Avira Rescue CD to Clean Your Infected PC The Complete List of iPad Tips, Tricks, and Tutorials Classic Super Mario Brothers Theme for Chrome and Iron Experimental Firefox Builds Put Tabs on the Title Bar (Available for Download) Android Trojan Found in the Wild Chaos, Panic, and Disorder Wallpaper Enjoy Christmas Beyond the Holiday with Christmas Eve Crisis Parrotfish Extends the Number of Services Accessible in Twitter Previews

    Read the article

  • How to enable bluetooth when there is no hardware switch

    - by Robert Mutke
    My laptop Thinkpad Edge e320 got out of standby with bluetooth and wireless disabled. WiFi got enabled normally in unity but bluetooth says that "bluetooth is disabled by hardware switch". There is no hw switch on my laptop. I tried: # echo 1 > /sys/devices/platform/thinkpad_acpi/bluetooth_enable bash: echo: write error: Operation not permitted but as you see no results. Fn-F9, which is radio control, does not work. Any help?

    Read the article

  • Medical Devices which supports Direct access through Bluetooth Low Energy [on hold]

    - by Suganthan
    I have went through this link and came to know that we can directly interact with BLE devices to read and write data, so I just want to know some medical device which supports direct access to third-party application (we can directly access the data from the medical device data). Is their any devices which supports direct access to the data Note: I already went through medical devices like Withings and Fitbit

    Read the article

  • Wireless is disabled by hardware switch on Dell Inspiron 1750

    - by lowerkey
    I have a problem where Ubuntu (12.04) says there is a wireless network card, but it is disabled by a hardware switch. How do I turn it on? I checked the BIOS, and the wireless card is enabled there. Fn + F2 was also no success. The results of rfkill list: 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes 1: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes sudo rfkill unblock wifi did nothing to the Wireless Status.

    Read the article

  • What hardware makes a good MongoDB Server ? Where to get it ?

    - by João Pinto Jerónimo
    Suppose you're on dell.com right now and you're buying a server to run your MongoDB database for your small startup. You will have to handle literally tens of thousands of writes and reads per minute (but small objects). Would you go for 2 processors ? Invest more on RAM ? I've heard (correct me if I'm wrong) MongoDB handles the most it can on the RAM and then flushes everything to the disk, in that case I should invest on a CPU with a large L2 cache, probably 40GB of RAM and a solid state drive.. right ? Would I be better off with a high end (~$11,309, 2 expensive processors, 96GB of RAM) server or 2x(~$6,419, 2 expensive processors, 12GB of RAM) servers ? Is Dell ok or do you have better sugestions ? (I'm outside the US, on Portugal)

    Read the article

  • Low graphics mode error on startup with NVIDIA graphics (12.04 LTS )

    - by champost
    My problem is similar to two other posts concerning ATI cards and 12.04 LTS: Post1 & Post2. In my case I use a Dell Precision M4300 laptop which uses a NVidia Quadro FX 880M. Doing a lspci | grep VGA gave me this: 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [Quadro FX 880M] (rev a2) My workaround consists of logging in at the console and running sudo start lightdm which works perfectly but I am looking for a better workaround than this ?

    Read the article

  • Dual monitor, with a low resolution projector

    - by user900978
    I need to show a presentaion to a conference tomorrow. Today I tryed my Ubuntu 10.04 with the projector. My notebook has a resolution of 1440x960, the projector seems to have a really lower resolution. However, thanks to nvidia-settings I configured my video card (a nvidia 9800), it works with other display, but not with the projector. I found the projector, configured as Twin-view, resolution Auto and pressed on Apply, then "Save to x Configuration". On projector is visualized just a quarter of my notebook display. I tryed also to reduce my resolution and to change the resolution of projector, but I obtained no better results. How can I Solve it? On windows all goes well, but I need Ubuntu for personal reasons. Thanks in advance

    Read the article

  • Ubuntu reports low battery capacity on my Dell Vostro

    - by Jeff
    I have a Dell Vostro 1500. Before I wiped Windows XP off my hard drive in 2009, I had a full ~7 hrs battery capacity. I installed Ubuntu 9, and the capacity immediately dropped to about 27% (and has since decreased to about 11%). I couldn't figure out what to do, so I've just lived with the 20-30 minute battery life ever since. I upgraded to Ubuntu 10, and the issue remained. I wiped my hard drive clean again and installed Ubuntu 11, and the issue still remains. I tried what they told me in the forum here, but it didn't do anything. Is it possible for a battery to suddenly lose most of its capacity?? Or is there a bug in the power management software?

    Read the article

  • Add ability to add tabs to the end of a line in Windows PowerShell ISE

    - by deadlydog
    Originally posted on: http://geekswithblogs.net/deadlydog/archive/2013/06/24/add-ability-to-add-tabs-to-the-end-of-a.aspxIn the preamble of an earlier post I mentioned that one of the little things that bugs me about Windows PowerShell ISE is that you can add tabs to the start of a line, but not to the end of a line.  This is likely because it would interfere with the tab-completion feature.  I still like to be able to put tabs on the end of my code lines though so that I can easily line up my comments.  Here is how we can achieve this functionality in PowerShell ISE. Read more at http://blog.danskingdom.com/add-ability-to-add-tabs-to-the-end-of-a-line-in-windows-powershell-ise/

    Read the article

  • Learning low latency C++ and Java?

    - by user997112
    I'm currently in a role where I dont get to write any C++ or Java. However, the role is good because provides me with exposure to the business side (i'm interested in finance). Eventually I would like to get into high frequency trading infrastructure. Therefore, outside of work hours i'd like to maximise the knowledge I can gain about high performance Java and C++. I already have the Java Performance Tuning book, which is ok but not impressive. Can people recommend anymore latency blogs/books/websites for learning about making C++/C/Java or even Unix very fast? Or perhaps making the network parts of the OS (if re-writing Unix components) faster? EDIT: Or perhaps we could make this THE thread for advice on writing fast code

    Read the article

  • Can this USB3 behaviour be anything else than a hardware failure?

    - by Jonas Wielicki
    While my motherboard is half a year old now (ASUS M5A99X EVO), I only recently made use of the USB3 boards (after purchase of USB3 external harddrive). However, I am encountering issues. I am running linux 3.6.7-4.fc16.x86_64. Initially, the harddrive worked fine with USB3 (amazing ˜160MB/s), but I had some problems after putting after putting the harddrive to sleep manually after use (backup) with hdparm -Y. After some time, the device disappears from lsusb and i see the following in dmesg: [ 1924.091107] xhci_hcd 0000:05:00.0: xHCI host not responding to stop endpoint command. [ 1924.091114] xhci_hcd 0000:05:00.0: Assuming host is dying, halting host. [ 1924.091147] xhci_hcd 0000:05:00.0: HC died; cleaning up [ 1924.091233] usb 11-1: USB disconnect, device number 2 [ 1924.091272] sd 6:0:0:0: Device offlined - not ready after error recovery Testing with my (USB3 capable) notebook, I could not immediately reproduce the behaivour. I put the drive to sleep with hdparm -Y and waited for like an hour, but it was still listed in lsusb and responded after a few seconds delay when I tried after the hour of waiting. After an hour, on the desktop, the device would've usually vanished. Googling for this issue, I came across hints that playing around with IOMMU settings and upgrading the BIOS might help. I upgraded the BIOS and tried both with and without IOMMU enabled, got similar results. Most disturbing is, that one of the two USB 3.0 hubs sometimes also disappears from lsusb (or does not show up after boot at all). I've also heard that there are some hardware issues with ASUS USB3 ports. Applying mechanic force to the capble doesn't push the issue to one side or the other. Also, udev seems to reenumerate all devices if I plug the HDD into the USB 3.0 port without success (I can notice from my keyboard layout being changed to the default, which I do not use normally). The drive is externally powered and the external power supply is plugged in (it also stays powered when unplugging from USB, although it will spin down then). So before I try to return the board, I wanted to find out whether this can be anything else than a failure on the motherboard?

    Read the article

  • Inexplicable low ranking [closed]

    - by Mick
    I have created two similar websites relating to monetary systems. So far, one appears to be loved by Google and the other hated. I'm struggling to work out why. The successful one is fullreservebanking.com. If you type in "full reserve banking" into Google, my site appears 2nd in the list behind Wikipedia. The unsuccessful one is fractionalreserves.com. If you type in "fractional reserve banking" into Google, it's nowhere to be seen. This is a mystery to me because both sites were created by me with the same design philosophy, both in pure html. Both are packed to the rafters with references to, and information about, their respective subjects. One issue I'm worried may be the cause is to do with the location of the sites. I got a web hosting package from hostmonster.com for fullreservebanking, but fractionalreserves is just an "add-on" which sits on a subdirectory of fullreservebanking. I wonder if Google somehow detects this and treats it as a less significant website?

    Read the article

  • ubuntu 11, maximum resolution is a low 1024 x 768

    - by djturbojp7
    I just installed ubuntu 11 and the maximum resolution that it will let me set it at is 1024 x 768. My graphics are onboard, its the intel 82845g. Trying to increase the resolution and support the video more smoothly. UPDATE: user1@pc1:~$ xrandr | grep maximum Screen 0: minimum 320 x 200, current 1024 x 768, maximum 2048 x 2048 user1@pc1:~$ gtf 1280 1024 59.9 # 1280x1024 @ 59.90 Hz (GTF) hsync: 63.49 kHz; pclk: 108.70 MHz Modeline "1280x1024_59.90" 108.70 1280 1360 1496 1712 1024 1025 1028 1060 -HSync +Vsync user1@pc1:~$ xrandr --newmode "1280x1024_59.90" 108.70 1280 1360 1496 1712 1024 1025 1028 1060 -HSync +Vsync X Error of failed request: BadName (named color or font does not exist) Major opcode of failed request: 149 (RANDR) Minor opcode of failed request: 16 (RRCreateMode) Serial number of failed request: 20 Current serial number in output stream: 20 user1@pc1:~$

    Read the article

  • Brute Force Hardware versus Tuning

    - by jchang
    Every now and then, the question is asked “When will servers be powerful enough that performance tuning will not be necessary.” Sometimes I get the impression this was posed not on technical grounds, but rather that ISVs and CIOs don’t like performance specialists. Fortunately (for me) it does not appear that this will ever happen for two principal reasons: 1) hardware and tuning contribute in such completely different aspects that neither can be ignored, and 2) multi-core processors actually introduce...(read more)

    Read the article

  • Aide On a Low Memory System

    - by Jason Mock
    I have a Linux server running on a Linode.com VPS, where I'm trying to utilize aide to detect any issues. However, the nightly aide run uses up all of my available memory and swap (512MB RAM / 384MB SWAP). I've tried adding a script to /etc/cron.daily that would stop/start services using a lot of memory (apache2, mysql) during the aide run. Unfortunately, it seems like aide continued to use every available byte (including the space freed up from apache2 and mysql). Here's a graph from munin showing what happens when aide runs: Note the spike of memory usage, well into swap, when aide runs Any suggestions on tuning aide to not use so much memory, or is there an alternative to aide that doesn't behave this way?

    Read the article

  • High-Powered Sites for low Cost

    - by HighAltitudeCoder
    Ahh, I am experiencing the intimidation of my very first post - visible by the whole world. Ok, here goes.   This first post is nothing exceptional.  It is simply a recommendation based (fittingly, I suppose) upon the job search you may be gearing up for.  I find myself in this very situation right now.  And, I will take my own recommendation after posting this entry. Job-Seekers: To the left you will notice two links under "Recommended Learning".  I have found these links to be invaluable when it comes to re-tooling, re-familiarizing, or otherwise resharping my skills when looking for that next job. Often, you will find job-postings with the text, usually posted after a laborious list of qualifications indicating the company's desire to hire candidates who know what they are doing: "...Looking for a candidate who can hit the ground running...".  The interesting thing about this post to me is I've encountered many individuals who, after speaking and working with them for some time, I've realized are perfectly capable of hitting the ground running - and FAST.  But what if they speed off in the wrong direction? The next time you spearhead a major task in your job, ask yourself: Am I headed in the wrong direction?  There are many ways to do this.  In fact, I've found in this new field there are more tempting ways to steer your project in the wrong direction than there are good ones.  I don't want to suggest that every one of my posts will fall into the "right direction" category, however I do think a healthy dose of introspection of the pros and cons will always be beneficial before you set off. That said, allow me to expound on the previously mentioned links. These web sites are invaluable.  They demonstrate the capabilities of existing as well as new and upcoming tools available in several IDE's.  I've viewed many tutorials in LearnVisualStudio.NET, and only one or two so far in TrainingSpot, however I've been delighted in their simplicity and straightforward approach to proper usage of the particular tool or concept being discussed.  They have not (so far in my experience) demonstrated ways in which to use the tools that become cumbersome, impractical, or error-prone. Each website has step-by-step videos that can be paused, replayed, and most importantly, they are done in real time.  As the author is typing, the viewer gets to experience the coding experience from a first-person perspective, including syntax errors, unexpected behaviors, IDE setup idiosyncracies, everything.  A subtle value I've gained from these videos is that a certain degree of confusion and introspection is normal when working with new tools and exploring new paths.  They (as well as your own experience) are not to be feared, but enjoyed.  I highly recommend them. Good work, guys!

    Read the article

  • What router hardware or software should be used when multiple public IPs are routed into the same LAN?

    - by lcbrevard
    I am looking for recommendations to replace a set of consumer grade (Linksys, Netgear, Belkin) routers with something that can handle more traffic while routing more than one static public IP into the same LAN address space. We have a block of static public IPs, 5 usable, with Comcast Business. Currently four of them are in use for: General office access Web server Mail and DNS servers Download and backup web server for separate business All systems (a mixture of physical and virtual) are in the same LAN address space (10.x.y.0/24) to enable easy access between them inside the office. There are 30 or more systems in use depending on which virtual machines are currently active. We have a mixture of Windows, Linux, FreeBSD, and Solaris. Currently a separate consumer grade router is used for each of the four static addresses, with its WAN address set to the specific static address and a different gateway address for each: uses 10.x.y.1 - various ports are forwarded to various LAN IPs on systems with gateway 10.x.y.1 uses 10.x.y.254 - port 80 is forwarded to a server with gateway 10.x.y.254 uses 10.x.y.253 - ports for mail and dns are forwarded to a server with gateway 10.x.y.253 uses 10.x.y.252 - ports as needed are forwarded to server with gateway 10.x.y.252 Only router 1. is allowed to serve DHCP and address reservation based on the MAC is used for most of the internal "server" IP addresses so they are at fixed values. [Some are set static due to limitations in the address reservation capabilities of router 1.] And, yes, this really does work! But... I am looking for: better DHCP with more capable address reservation higher capacity so I don't have to periodically power cycle the routers One obvious improvement would be to have a real DHCP server and not use a consumer grade router for that purpose. I am torn between buying a "professional" router such as Cisco or Juniper or Sonic Wall verus learning to configure some spare hardware to perform this function. The price goes up extremely rapidly with capabilities for commercial routers! Worse, some routers require licensing based on the number of clients - a disaster in our environment with so many virtual machines. Sorry for such a long posting but I am getting tired of having to power cycle routers and deal with shifting IP addresses afterwards!

    Read the article

  • Ubuntu on low powered laptop

    - by zkent
    First off, I am new to Ubuntu. I come from a Windows background (DOS before that) and am loving it so far. I installed it on an older Dell laptop that I wanted to get another year out of. I set this machine up primarily as a LAMP development machine for a project I am working on. The machine is a Vostro 1500 and it has 4GB RAM (maxed) and an upgraded hard drive. I can't watch YouTube videos for long before it starts to overheat and start acting sporadic. I can live without YouTube but every so often the application switching (alt-tab) gets slower and begins not showing all applications and the Dash home quits displaying properly. I am sure I am asking a lot of this old machine. What I really want to know is: are there any settings in Ubuntu that allow me to lower the graphic effects (fade-ins, transparencies, fancy transitions, etc) that would be less taxing on the video card?

    Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >