Search Results

Search found 5564 results on 223 pages for 'multi gpu'.

Page 20/223 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

• How to get Unity working on dual gpu laptop?

  - by Mourgos

  I recently bought a new laptop (Asus X53S series) that has two GPUs, an NVidia GeForce GT 540M and an integrated Intel GPU (I believe it's called Intel HD graphics 3000). I installed the recommended restricted NVidia drivers after a clean Ubuntu 11.10 install. In the 'additional drivers' program I get the message: "This driver is enabled and in use", although when I try to open the NVidia X Server Settings it says "You do not appear to be using the NVIDIA X driver." which seems to be the case since Ubuntu only starts using Unity 2D. I've had the same issue in 11.04 and I was forced to use the nouveau driver just to get unity working, but since I get quite a few crashes with it I really want to get the propriety driver working this time around. Since I've never had this issue with older laptops, I can only assume it is caused due to the dual gpu configuration. How do I get Ubuntu to use the propriety drivers, or is there any workaround to get the integrated Intel GPU to be ignored by Ubuntu? Alternatively, has anyone got Unity working with a similar setup?

  Read the article

• Core Parking in Ubuntu?

  - by Xxx Xxx

  Core parking is a new feature that introduced in Windows 7 to get better Battery performance . Depending on the resource use of the operating system it may park one or multiple cores of a multi-core cpu to reduce the computer’s power consumption and thermal emissions. Once operations require more processing power, the parked cores are activated again to assist in the tasks So my question is that is there any way i can do it on Ubuntu 12.04 " Core Parking " ?

  Read the article

• Are there deprecated practices for multithread and multiprocessor programming that I should no longer use?

  - by DeveloperDon

  In the early days of FORTRAN and BASIC, essentially all programs were written with GOTO statements. The result was spaghetti code and the solution was structured programming. Similarly, pointers can have difficult to control characteristics in our programs. C++ started with plenty of pointers, but use of references are recommended. Libraries like STL can reduce some of our dependency. There are also idioms to create smart pointers that have better characteristics, and some version of C++ permit references and managed code. Programming practices like inheritance and polymorphism use a lot of pointers behind the scenes (just as for, while, do structured programming generates code filled with branch instructions). Languages like Java eliminate pointers and use garbage collection to manage dynamically allocated data instead of depending on programmers to match all their new and delete statements. In my reading, I have seen examples of multi-process and multi-thread programming that don't seem to use semaphores. Do they use the same thing with different names or do they have new ways of structuring protection of resources from concurrent use? For example, a specific example of a system for multithread programming with multicore processors is OpenMP. It represents a critical region as follows, without the use of semaphores, which seem not to be included in the environment. th_id = omp_get_thread_num(); #pragma omp critical { cout << "Hello World from thread " << th_id << '\n'; } This example is an excerpt from: http://en.wikipedia.org/wiki/OpenMP Alternatively, similar protection of threads from each other using semaphores with functions wait() and signal() might look like this: wait(sem); th_id = get_thread_num(); cout << "Hello World from thread " << th_id << '\n'; signal(sem); In this example, things are pretty simple, and just a simple review is enough to show the wait() and signal() calls are matched and even with a lot of concurrency, thread safety is provided. But other algorithms are more complicated and use multiple semaphores (both binary and counting) spread across multiple functions with complex conditions that can be called by many threads. The consequences of creating deadlock or failing to make things thread safe can be hard to manage. Do these systems like OpenMP eliminate the problems with semaphores? Do they move the problem somewhere else? How do I transform my favorite semaphore using algorithm to not use semaphores anymore?

  Read the article

• Multi monitor windows positioning problem

  - by Peter Stegnar

  I need a good multi monitor tool mainly to gain control over the windows positioning. I have problem that closed window/application remembers at which monitors it was (closed). I have disconnect this monitor (this is often LCD TV) I have problem with this "remembering" windows/applications that was closed in LCD TV are out of sight when LCD TV is disconnected. What is the best practice to deal with this problem other that that not to close windows on this monitor)? Are there any good multi-monitor software to deal with this?

  Read the article

• Is it possible to use multi keyboards with multi keyboard layouts simultaneously?

  - by mono

  Considering to switch to dvorak layout, but this terminal is used by multi users as the same user account. It is unacceptable to ask all people to switch layout, plus it is hard to use dvorak layout with a keyboard qwerty-ly labeled. But there are spare (USB,qwerty) keyboards, so if I plug another keyboard in and be able to use multi layouts on different psyical keyboard simultaneously (I will rearrange letters on keys), the problem get solved. solution for either windows or linux is fine. anyway thanks all.

  Read the article

• Updating wordpress in a multi-node environment

  - by Peter

  I'm finding this very tricky in a multi node environment, with code under revision control. AKA. multiple frontends and single database. I have a deployment process that pushes a git repo to the servers, but obviously if I update Wordpress from within the admin panel, it will update the files to one FE. Then I would need to copy over the new files to the other FE nodes. Plus, whenever these changes are written when Wordpress updates on a node, it writes code into the git repo. As such, it then breaks the auto deploys that perform 'git pulls', as it then has untracked changes and refuses to pull in new deploys unless manually intervened. How does one easily keep Wordpress updated in a multi node (load balanced) environment?

  Read the article

• Cannot assign multi-line values to CustomAttributes with Set-Mailbox

  - by Biglig

  A colleague is implementing an application that generates signatures and publishes them to Outlook. It would be useful to him if I could store a multi-line string for each user in Active-Directory. Using one of the Custom-Attributes seems obvious, but if I try set-mailbox biglig -CustomAtribute1 "First Line``r``n Second Line" then CustomAttribute1 gets set to "FirstLineSecondLine" and looses the breaks. However, the same syntax works fine when I set e.g. StreetAddress or Notes. Of course, those are changed with set-user rather than set-mailbox. According to Technet's reference for set-user and set-mailbox, The CustomAttributes, StreetAddress, and Notes all take a system.string as their value. Is it just the case that some attributes accept multi-line strings and some don't? If so, can anyone suggest a workaround?

  Read the article

• Help trying to get two-finger scrolling to work on Asus UL80VT

  - by Dan2k3k4

  Multi-touch works fine on Windows 7 with: two-fingers scroll vertical and horizontally, two-finger tap for middle click, and three-finger tap for right click. However with Ubuntu, I've never been able to get multi-touch to "save" and work, I was able to get it to work a few times but after restarting - it would just reset back. I have the settings for two-finger scrolling on: Mouse and Touchpad Touchpad Two-finger scrolling (selected) Enable horizontal scrolling (ticked) The cursor stops moving when I try to scroll with two fingers, but it doesn't actually scroll the page. When I perform xinput list, I get: Virtual core pointer id=2 [master pointer (3)] ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ETPS/2 Elantech ETF0401 id=13 [slave pointer (2)] I've tried to install some 'synaptics-dkms' bug-fix (from a few years back) but that didn't work, so I removed that. I've tried installing 'uTouch' but that didn't seem to do anything so removed it. Here's what I have installed now: dpkg --get-selections installed-software grep 'touch\|mouse\|track\|synapt' installed-software libsoundtouch0 --- install libutouch-evemu1 --- install libutouch-frame1 --- install libutouch-geis1 --- install libutouch-grail1 --- install printer-driver-ptouch --- install ptouch-driver --- install xserver-xorg-input-multitouch --- install xserver-xorg-input-mouse --- install xserver-xorg-input-vmmouse --- install libnetfilter-conntrack3 --- install libxatracker1 --- install xserver-xorg-input-synaptics --- install So, I'll start again, what should I do now to get two-finger scrolling to work and ensure it works after restarting? Also doing: synclient TapButton1=1 TapButton2=2 TapButton3=3 ...works but doesn't save after restarting. However doing: synclient VertTwoFingerScroll=1 HorizTwoFingerScroll=1 Does NOT work to fix the two-finger scrolling. Output of: cat /var/log/Xorg.0.log | grep -i synaptics [ 4.576] (II) LoadModule: "synaptics" [ 4.577] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 4.577] (II) Module synaptics: vendor="X.Org Foundation" [ 4.577] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech ETF0401' [ 4.577] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 4.584] (--) synaptics: ETPS/2 Elantech ETF0401: x-axis range 0 - 1088 [ 4.584] (--) synaptics: ETPS/2 Elantech ETF0401: y-axis range 0 - 704 [ 4.584] (--) synaptics: ETPS/2 Elantech ETF0401: pressure range 0 - 255 [ 4.584] (--) synaptics: ETPS/2 Elantech ETF0401: finger width range 0 - 16 [ 4.584] (--) synaptics: ETPS/2 Elantech ETF0401: buttons: left right middle double triple scroll-buttons [ 4.584] (--) synaptics: ETPS/2 Elantech ETF0401: Vendor 0x2 Product 0xe [ 4.584] (--) synaptics: ETPS/2 Elantech ETF0401: touchpad found [ 4.588] (**) synaptics: ETPS/2 Elantech ETF0401: (accel) MinSpeed is now constant deceleration 2.5 [ 4.588] (**) synaptics: ETPS/2 Elantech ETF0401: MaxSpeed is now 1.75 [ 4.588] (**) synaptics: ETPS/2 Elantech ETF0401: AccelFactor is now 0.154 [ 4.589] (--) synaptics: ETPS/2 Elantech ETF0401: touchpad found Tried installing synaptiks but that didn't seem to work either, so removed it. Temporary Fix (works until I restart) Doing the following commands: modprobe -r psmouse modprobe psmouse proto=imps Works but now xinput list shows up as: Virtual core pointer id=2 [master pointer (3)] ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ImPS/2 Generic Wheel Mouse id=13 [slave pointer (2)] Instead of Elantech, and it gets reset when I reboot. Solution (not ideal for most people) So, I ended up reinstalling a fresh 12.04 after indirectly playing around with burg and plymouth then removing plymouth which removed 50+ packages (I saw the warnings but was way too tired and assumed I could just 'reinstall' them all after (except that didn't work). Right now xinput list shows up as: ? Virtual core pointer --- id=2 [master pointer (3)] ? ? Virtual core XTEST pointer --- id=4 [slave pointer (2)] ? ? ETPS/2 Elantech Touchpad --- id=13 [slave pointer (2)] grep 'touch\|mouse\|track\|synapt' installed-software libnetfilter-conntrack3 --- install libsoundtouch0 --- install libutouch-evemu1 --- install libutouch-frame1 --- install libutouch-geis1 --- install libutouch-grail1 --- install libxatracker1 --- install mousetweaks --- install printer-driver-ptouch --- install xserver-xorg-input-mouse --- install xserver-xorg-input-synaptics --- install xserver-xorg-input-vmmouse --- install cat /var/log/Xorg.0.log | grep -i synaptics [ 4.890] (II) LoadModule: "synaptics" [ 4.891] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 4.892] (II) Module synaptics: vendor="X.Org Foundation" [ 4.892] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad' [ 4.892] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 4.956] (II) synaptics: ETPS/2 Elantech Touchpad: ignoring touch events for semi-multitouch device [ 4.956] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 1088 [ 4.956] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 704 [ 4.956] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255 [ 4.956] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15 [ 4.956] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple [ 4.956] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe [ 4.956] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found [ 4.980] () synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5 [ 4.980] () synaptics: ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75 [ 4.980] (**) synaptics: ETPS/2 Elantech Touchpad: AccelFactor is now 0.154 [ 4.980] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found So, if all else fails, reinstall Linux :/

  Read the article

• How can a multi-select-list be edited using asp.net mvc?

  - by Anders Juul

  I'd like to edit an object like the one below. I'd like the UsersSelectedList populated with one or more Users from the UsersGrossList. Using the standard edit-views in mvc, I get only strings and booleans (not shown below) mapped. Many of the examples I find on google utilizes early releases of the mvc framework whereas I use the official 1.0 release. Any examples of the view is appreciated. public class NewResultsState { public IList<User> UsersGrossList { get; set; } public IList<User> UsersSelectedList { get; set; } }

  Read the article

• cuda program on VMware

  - by scatman

  i wrote a cuda program and i am testing it on ubuntu as a virtual machine. the reason for this is i have windows 7, i don't want to install ubuntu as a secondary operating system, and i need to use a linux operating system for testing. my question is: will the virtual machine limit the gpu resources? So will my cuda code be faster if i run it under my primary operating system than running it on a virtual machine?

  Read the article

• Which virtualization solutions are available for non-x86 platforms?

  - by asmaier

  Are their any virtualization solutions like Xen, KVM and VMWare ESX available for non-x86 platform? Especially I'm interested if there are solutions available or if Xen, KVM can be made to run on the platforms POWER5/6/7 PowerPC Itanium 64 NEC SX-8/9 Cray X2 BlueGene What are your experiences? Is it possible to virtualize GPUs like Nvidias Tesla/Fermi?

  Read the article

• Simultaneous launch of Multiple Kernels using CUDA for a GPU

  - by cudadev

  Is it possible to launch two kernels that do independent tasks, simultaneously. For example if I have this Cuda code // host and device initialization ....... ....... // launch kernel1 myMethod1 <<<.... (params); // launch kernel2 myMethod2 <<<..... (params); Assuming that these kernels are independent, is there a facility to launch them at the same time allocating few grids/blocks for each. Does CUDA/OpenCL have this provision.

  Read the article

• Disable Crossfire on an ATI HD 5970

  - by cdecker

  I'm trying to create a computation cluster using ATI GPUs. The problem is that I have to disable Crossfire in order to get maximum performance out of the ATI Radeon HD 5970 I bought to get started, but no matter what I do I can't disable it. The problem is that I'd like to run an OpenCL application on the two cores in parallel, but right now they just interfere with each other. Any idea on how to do so under Ubuntu Linux, with ATI Catalyst 10.10?

  Read the article

• Need to Connect 2 HDMI between Onboard and Add-In GPUs - What's the consequences?

  - by jmalais

  If i plug a second hdmi cable into my onboard video output (my dedicated add-in only has one hdmi port) will it use my video card or the onboard for that display? Also, what is the difference in quality between HDMI and DVI? I do have a DVI to HDMI adapter and cable that I could use alternatively if the above is not in my best interest. This is a gaming related question as I will be gaming off the two displays, hopefully in the highest of quality.

  Read the article

• Which platform should i choose for scientific computing?

  - by Lucas

  What are the pros and cons in choosing PS3 as a platform for scientific computing in detriment of GPU's? Is It the better choice ?

  Read the article

• PSU requirement question for my PC setup.

  - by user69474

  I understand that sometimes there may be a situation where the PSU is way more than required but in this case of mine, I'm not too sure. Sometimes when I play games, my computer will crash and restarts itself, 10 mins into the game. Once I received a message that says something like the power is overheating or something like that. Ok, so I have a 500W PSU. I have: 1x Internal DVD writer 1x SATA 250GB HD 1x Nvidia 8500 GT 2GB RAM. As I'm planning to get an additional 250GB SATA HD, I wonder if I need to increase my PSU as well -- in full knowledge of the previous crashes experienced before. Should I upgrade my PSU to 650W perhaps, or is that excessive?

  Read the article

• New graphics card (GTX 760) slowing down entire PC

  - by Cayetano Gonçalves

  My new graphics card is making my PC totally unusable. It boots up really slowly, and when the windows screen comes on, the mouse lags really far behind. Nothing opens at a normal speed. However, when I put in my 5-year old graphics card, it all works fine. I'm currently using a Foxconn Renaissance LGA 1366 Intel X58 ATX Motherboard, Intel Motherboard Intel Core i7-950 Bloomfield 3.06GHz LGA 1366 130W Processor, and a EVGA SuperNOVA 850G2 80PLUS Gold Certified ATX12V/EPS12V 850W Power Supply . I know it can't be the power supply, because I just bought it today to try to fix the problem. I've also installed the newest version of BIOS available for my motherboard. I've also seen extreme variations in CPU while the new graphics card is in, and when the old graphics card is installed, it is much calmer. Any thoughts?

  Read the article

• NVIDIA CUDA SDK Examples Compilation Unsupported Architecture 'computer_20'

  - by Andrew Bolster

  On compilation of the CUDA SDK, I'm getting a nvcc fatal : Unsupported gpu architecture 'compute_20' My toolkit is 2.3 and on a shared system (i.e cant really upgrade) and the driver version is also 2.3, running on 4 Tesla C1060s If it helps, the problem is being called in radixsort. It appears that a few people online have had this problem but i havent found anywhere that actually gives a solution.

  Read the article

• SLI Artifact issues

  - by sloughk

  When I enable SLI I keep getting artifacts in random games and in Windows Aero sometimes . It doesn't seem to be about over-heating as it happens randomly, and sometimes whole computers just crashes (not blue-screen, just black gone...) My setup: Geforce 8800 GTS 320MB ( http://www.bfgtech.com/bfgr88512gtoce.aspx ) x 2 GIGABYTE EX58-UD4 Windows 7 RC PSU 800W I've got the latest NVIDIA drivers and F5 BIOS update (*SLI update*). When I disable SLI and use the cards separately they are working just fine even in games. Any idea why this might happen?

  Read the article

• How do you get average of sums in SQL (multi-level aggregation)?

  - by paxdiablo

  I have a simplified table xx as follows: rdate date rtime time rid integer rsub integer rval integer primary key on (rdate,rtime,rid,rsub) and I want to get the average (across all times) of the sums (across all ids) of the values. By way of a sample table, I have (with consecutive identical values blanked out for readability): rdate rtime rid rsub rval ------------------------------------- 2010-01-01 00.00.00 1 1 10 2 20 2 1 30 2 40 01.00.00 1 1 50 2 60 2 1 70 2 80 02.00.00 1 1 90 2 100 2010-01-02 00.00.00 1 1 999 I can get the sums I want with: select rdate,rtime,rid, sum(rval) as rsum from xx where rdate = '2010-06-01' group by rdate,rtime,rid which gives me: rdate rtime rid rsum ------------------------------- 2010-01-01 00.00.00 1 30 (10+20) 2 70 (30+40) 01.00.00 1 110 (50+60) 2 150 (70+80) 02.00.00 1 190 (90+100) as expected. Now what I want is the query that will also average those values across the time dimension, giving me: rdate rtime ravgsum ---------------------------- 2010-01-01 00.00.00 50 ((30+70)/2) 01.00.00 130 ((110+150)/2) 02.00.00 190 ((190)/1) I'm using DB2 for z/OS but I'd prefer standard SQL if possible.

  Read the article

• how to make multi url in a line of '- url:' ,on google-app-engine.

  - by zjm1126

  like this: handlers: - url: /media static_dir: media - url: /form;/items.html script: validate.py /form;/items.html i want /form and /item.html use validate.py thanks

  Read the article

• 912 stream processor available in OpenCL

  - by tugrul büyükisik

  I am thinking of assembling this system: AMD CPU (A8-3870 APU which has Radeon HD 6550D inside: 400 stream processors:xxx GFLOPS) nearly 110$ AMD Graphics card: HD 7750 (512 stream processors:819 GFLOPS peak performance) nearly 170$ Appropriate ram (1600MHz bus) Mainboard What GFLOPS level can I reach as a stable mode with using OpenCL and similar programs? Can I use all 912 stream processors at the same time? I am not trying to do a VS question. I need to know what could be better for scientific computing (%75 of the time) and gaming (%25 of the time) because I have a low budget. With "scientific calculations" I mean fluid dynamics/solid state physics simulating; with games I mean those that need openCL and PhysX.

  Read the article

• Silverlight hardware-accelerated playback is greyed-out - How do I enable it?

  - by Not So Sharp

  I am trying to play Netflix videos (which only play via Silverlight), but they play choppy because Silverlight's hardware-accelerated playback is disabled. (video playback on WMP11 and VLC is flawless, so I know beyond certainty that my built-in video card's hardware is perfectly capable of hardware-accelerated playback) I have the latest & greatest Silverlight version: 5.1.10411.0 And I tried to "un-grey-it-out" via the Registry's GPUVideoDecodeEnabled and UpdateMode, but that didn't help. Is there any way to "un-grey-it-out"?

  Read the article

• NVIDIA GPUs and PhysX engine

  - by Lucas

  How is the NVIDIA PhysX engine implemented in the NVIDIA GPUs: It's a co-processor or the physical algorithms are implemented as fragment programs to be executed in the GPU pipeline ?

  Read the article

• How does one go about fixing a pixelation issue?

  - by Tyler

  I've been having a lot of trouble with pixelation and also in-game display driver crashes. At first I thought the problem may have been my graphics card (Sapphire 5750) but I have RMA'd it three times and I'm still having trouble. So what I think it might be is my PSU, its 650Watt but its made by Azza so it was cheap and not made by a necessarily good company. Or maybe it could be the CPU (AMD Phenom Black Edition 3.4Ghz) It runs hot (60C) but it passes Everest's test. Someone told me it could be the memory (8GB DDR3) but I don't really see how RAM has anything to do with my problem. So what are some of you suggestions? Here is a video a made awhile ago of what is happening. http://www.metacafe.com/watch/4392213/ati_radeon_5750/ That was just a stress test most games tend to just freeze and crash or lock my system up.

  Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >