Search Results

Search found 2778 results on 112 pages for 'ping fm'.

Page 20/112 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

• Windows Server 2008 R2 DNS Server not working?

  - by wolfvilleian

  Hi, I have a server running Windows Server 2008 R2 hosting a DNS server, exchange 2010 and is a domain controller. One computer on the network (and domain) can ping the server 25% of the time, also when I try to ping it's own hostname it also does not work. However another computer that is on the domain can ping it fine, and another computer on the network but not domain can ping fine as well. The computer that cannot ping the server is setup to use the DNS server running on the server only (secondary dns points to nothing) and it will resolve the hostname of the server to the external IP not internal when the other two computers correctly resolve the internal All 3 computers and server are connected directly into the same switch. Does anyone have any ideas on how to fix this? Thanks

  Read the article

• OpenVPN Bridge on pfsense: once LAN pings clients, connectivity breaks

  - by Lucas Kauffman

  So I'm using a pfsense openvpn to bridge my LAN segment so VPN users can access the servers. The problem I'm having now is that I can establish a connection, I can ping the LAN server from the VPN, but as soon as I ping the client from the LAN server, there is no connectivity anymore between both parties. So: connect from the VPN client to the LAN = works ping the LAN from the VPN client = works access server from the VPN (ssh, ftp,...) = works ping client from server = doesn't work ping LAN from the VPN client = doesn't work anymore My bridge has em1 and ovpns1 bridged. I noted with tcpdump that ICMP is reaching the bridge between LAN and the VPN segment. But it's not put onto the em1 interface for some reason. My pfsense is running on an ESXi host with th vSwitch port enabled in promiscious mode. Firewall rules allow in and outbound traffic regardless origin or destination.

  Read the article

• How to get D-Link DWA-547 working on Ubuntu 13.10?

  - by Tan Kah Ping

  I got a D-Link DWA-547 Wifi card which is supposed to work out-of-the-box with Linux. Says so here: http://wireless.kernel.org/en/users/Drivers/ath9k/products/external While lspci does list the device, NetworkManager doesn't seem to allow me to configure Wifi. lsmod also shows that ath9k isn't loaded. Manually loading with 'modprobe ath9k' doesn't help. How do I get this card working on Ubuntu 13.10 64-bit?

  Read the article

• Installing gcc in Ubuntu 11.10

  - by Chi-Ping Lee

  I want to install gcc on my computer. To do this, I ran the following command: sudo apt-get install build-essential As this runs, it connects (or tries to connect) to the server tw.archive.ubuntu.com. But the server is not working. How can I fix this and get gcc installed? Note: the Taiwan mirror is down as of 2012-06-01 0352. See thread here. This pastebin contains the text of /etc/apt/sources.list, after changing from tw.archive.ubuntu.com to the main server.

  Read the article

• Flickering when accessing texture by offset

  - by TravisG

  I have this simple compute shader that basically just takes the input from one image and writes it to another. Both images are 128/128/128 in size and glDispatchCompute is called with (128/8,128/8,128/8). The source images are cleared to 0 before this compute shader is executed, so no undefined values should be floating around in there. (I have the appropriate memory barrier on the C++ side set before the 3D texture is accessed). This version works fine: #version 430 layout (location = 0, rgba16f) uniform image3D ping; layout (location = 1, rgba16f) uniform image3D pong; layout (local_size_x = 8, local_size_y = 8, local_size_z = 8) in; void main() { ivec3 sampleCoord = gl_GlobalInvocationID.xyz; imageStore(pong, imageLoad(ping,sampleCoord)); } Reading values from pong shows that it's just a copy, as intended. However, when I load data from ping with an offset: #version 430 layout (location = 0, rgba16f) uniform image3D ping; layout (location = 1, rgba16f) uniform image3D pong; layout (local_size_x = 8, local_size_y = 8, local_size_z = 8) in; void main() { ivec3 sampleCoord = gl_GlobalInvocationID.xyz; imageStore(pong, imageLoad(ping,sampleCoord+ivec3(1,0,0))); } The data that is written to pong seems to depend on the order of execution of the threads within the work groups, which makes no sense to me. When reading from the pong texture, visible flickering occurs in some spots on the texture. What am I doing wrong here?

  Read the article

• Windows Server 2008 R2 DNS Server not working?

  - by wolfvilleian

  I have a server running Windows Server 2008 R2 hosting a DNS server, exchange 2010 and is a domain controller. One computer on the network (and domain) can ping the server 25% of the time, also when I try to ping it's own hostname it also does not work. However another computer that is on the domain can ping it fine, and another computer on the network but not domain can ping fine as well. The computer that cannot ping the server is setup to use the DNS server running on the server only (secondary dns points to nothing) and it will resolve the hostname of the server to the external IP not internal when the other two computers correctly resolve the internal All 3 computers and server are connected directly into the same switch. Does anyone have any ideas on how to fix this? Thanks

  Read the article

• Connected to wireless, but no internet access

  - by boogaloo

  After installing Ubuntu 12.04 a week ago wireless internet had been working fine. It stopped working yesterday, however, and I'm at a loss for what to do even after scouring replies to similar posted problems. I have tried using Google's public DNS and turning off proxy settings on Firefox. I have used nm-tool and lshw to make sure my wireless device and driver are connected. If anyone can help me resolve this issue I would be extremely grateful! @kregerjd $ ping -c3 www.google.com ping: unknown host www.google.com @Alaa: $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 192.168.1.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 $ ping -c4 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data From 192.168.1.104 icmp_seq=1 Destination Host Unavailable From 192.168.1.104 icmp_seq=2 Destination Host Unavailable --- 192.168.1.1 ping statistics --- 4 packets transmitted, 0 received, +2 errors, 100% packet loss, time 2998ms pipe 4

  Read the article

• Why can my Mac not connect to my iPhone via ssh?

  - by martin08

  I couldn't always ssh to my iPhone from my Mac. They're both on the same wifi network but sometimes the connection is established, sometimes it failed. From my Mac: $ ssh [email protected] ssh: connect to host 192.168.0.102 port 22: Operation timed out $ ping 192.168.0.102 PING 192.168.0.102 (192.168.0.102): 56 data bytes ping: sendto: No route to host ping: sendto: Host is down ping: sendto: Host is down I enabled SSH on the phone and am sure it can load webpages. So what might be a reason why they cannot connect? Thanks

  Read the article

• PowerShell script halts execution when Windows XP PC is locked

  - by jshin47

  I have the following script that does a continuous ping and reports failures. It works fine, except the loop apparently "suspends" when the computer is locked. I have confirmed this by starting the script, immediately locking the PC, waiting 10 minutes, and seeing how many pings have occurred. It is nowhere near the expected number. What could be the culprit? Write-Host "Entering monitoring loop..." -Background DarkRed $ping = new-object System.Net.NetworkInformation.Ping $count_up = 0 $count_dn = 0 $count_dd = 0 while ($true) { $result = $ping.send("10.1.1.1") if ($result.Status -eq "Success") { $count_up++ $count_dd = 0 } else { $count_dn++ $count_dd++ $this_date = Get-Date Write-Host "VPN ping failed at time " $this_date -Background Magenta if ($count_dd -gt 3) { Write-Host "***VPN is Down***" `a send_mail_notification("VPN is Down", "") } } if ($Host.UI.RawUI.KeyAvailable -and ("q" -eq $Host.UI.RawUI.ReadKey("IncludeKeyUp,NoEcho").Character)) { Write-Host "Exiting monitoring loop..." -Background DarkRed break; } Start-Sleep -m 250 } $total = $count_up + $count_dn $uptime = 100 * $count_up / $total Write-Host $count_up " out of " $total " pings for a " $uptime "% uptime."

  Read the article

• Pinging/connecting to server.domain.local never works, but server does when the search domain is specified

  - by SuperMatt

  This is a bit of a weird one. I'm running ubuntu on a Windows domain. If I type "ping server" I can ping correctly and I can connect without any problems. It looks up my search domain (domain.local) and everything is hunky dory. Problem is when I try to ping server.domain.local. It just can't look up the server and comes back with "ping: unknown host server.domain.local" Part of me thinks that the name servers aren't set correctly, but I wonder if there is something I can do to get around it.

  Read the article

• How to flush DNS cache in Windows Mobile programmatically?

  - by Bounded

  Hello, My windows mobile application (written in C# with the compact framework) needs to know if a particular machine is active or not. To achieve this goal, I thought to use a ping mechanism. I tried to use the Ping class implemented in the opennetcf framework (the System.Net.NetworkInformation.Ping class for the .NET Framework is not part of the compact framework). Because I give to the Ping.Send function a host name, it first tries to resolve this host name and to retrieve an IP address. But i observe the following problem : If the first dns resolution fails (because the network is down at this moment), and if the application tries immediately again to send the ping, it fails too, even if the network is note down anymore. I check with a famous network protocol analyzer and i saw that only the requests concerning the first dns resolution are sent. The requests concerning the dns resolution of the second ping are not sent. Why is the second dns request not sent ? Is there any dns cache mechanism on such Windows Mobile devices ? If yes, can this mechanism beeing flushed programmatically ? EDIT : I gave up finding a solution to this DNS flush. I chose to ping an IP adress instead of a name machine. The problem of pinging an hard coded adress IP is that we have to be 100% sure that this IP will not change. The gateway IP can be used because it's always reachable (if it does not, it means the network is down).

  Read the article

• How can I use Perl and RRD to plot ping times?

  - by ChrisMuench

  I'm trying to do my first rrd graph through Perl. I have tried RRD::Simple and rrds and just can't get either one to work. Here's what I have so far: use strict; use RRD::Simple (); # Create an interface object my $rrd = RRD::Simple-new( file = "server.rrd" ); # Put some arbitary data values in the RRD file for the same # 3 data sources called bytesIn, bytesOut and faultsPerSec. $rrd-create( EqSearch = "DERIVE", MfSearch = "DERIVE", EQCostBasis = "DERIVE", MFCostBasis = "DERIVE" ); $rrd-update( EqSearch = 2, MfSearch = 3, EQCostBasis = 10, MFCostBasis = 15 ); # Generate graphs: # /var/tmp/myfile-daily.png, /var/tmp/myfile-weekly.png # /var/tmp/myfile-monthly.png, /var/tmp/myfile-annual.png my %rtn = $rrd-graph( destination = "/Users/cmuench/Documents/Code/perl", title = "Server A", vertical_label = "", interlaced = "", periods = [qw(hour)] );

  Read the article

• Java - FontMetrics without Graphics

  - by subSeven

  Hello! How to get FontMetrics without use Graphics ? I want to get FontMetrics in constructor, now I do this way: BufferedImage bi = new BufferedImage(5, 5, BufferedImage.TYPE_INT_RGB); FontMetrics fm = bi.getGraphics().getFontMetrics(font); int width = fm.stringWidth(pattern); int height = fm.getHeight();

  Read the article

• jQuery and regex for adding icons to specific links?!

  - by rayne

  I'm using jQuery to add icons to specific links, e.g. a myspace icon for sites starting with http://myspace.com etc. However, I can't figure out how to use regular expressions (if that's even possible here), to make jQuery recognize the link either with or without "www." (I'm very bad at regular expressions in general). Here are two examples: $("a[href^='http://www.last.fm']").addClass("lastfm").attr("target", "_blank"); $("a[href^='http://livejournal.com']").addClass("livejournal").attr("target", "_blank"); They work fine, but I now I want the last.fm link to work with http://last.fm, http://www.last.fm and http://www.lastfm.de. Currently it only works for www.last.fm. I also would like to make the livejournal link work with subdomains links like http://username.livejournal.com How can I do that? Thanks in advance!

  Read the article

• One host on a network can't connect to one other host

  - by Max Williams

  I'm on a local network with a few other people. On of the hosts is a virtual machine running in virtualbox on a mac, which has the ip address 192.168.0.35 (the VM that is, not the mac host). Everyone except one guy can connect (ie ping, ssh etc) to that machine. When that one guy tries to ping it he gets Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 Request timeout for icmp_seq 2 which i understand is just how certain mac os's report an unreachable connection. He can ping all the other hosts on the network, ie our computers, and we can all ping the VM fine and connect to it with no problems etc. His ip is 192.168.0.17. I ssh'd onto his machine (as a new user 'anon') and saw the same problems. I can ssh onto the 192.168.0.35 VM as well. From there, i can ping other users, but when i ping the problem guy, it's unreachable that way round as well. He restarted his mac, and was fine for a while. Then, just stopped working again. He's got a different IP to before. Any ideas, anyone? Don't know enough about this stuff to even diagnose the problem. thanks, max

  Read the article

• Connection established to google DNS, can't resolve any hosts

  - by Tar

  As you can see from the picture above, I am connected to google DNS but am unable to resolve any hostnames. When I try to ping sites like google.com, yahoo.com, etc, I get 'ping: unknown host'. Yes, I am able to ping localhost, I am able to ping hostname.domain.com, but not domain.com. I can't ping my nameservers. I can ping all hosts by IP address and that works. The output of my /etc/resolv.conf: nameserver 8.8.8.8 nameserver 8.8.4.4 Anyone know what the problem could be? 23:30:04.304955 IP my_server.44457 > 8.8.8.8.domain: 28349+ A? google.com. (28) 23:30:06.137985 IP 112.100.0.78.19781 > my_server.domain: 18717 [1au] A? www.my_domain.com. (46) 23:30:06.138286 IP my_server.domain > 112.100.0.78.19781: 18717*- 2/0/1 CNAME my_domain.com., A my_server (76) 23:30:06.686582 IP 112.100.0.74.19181 > my_server.domain: 65046 [1au] A? my_domain.com. (42) 23:30:06.686811 IP my_server.domain > 112.100.0.74.19181: 65046*- 1/0/1 A my_server (58) 23:30:07.043764 IP my_server.50465 > 4.2.2.1.domain: 13865+ PTR? 142.254.22.67.in-addr.arpa. (44) 23:30:09.065904 IP my_server.45242 > 8.8.4.4.domain: 29011+ PTR? 123.72.117.130.in-addr.arpa. (45) 23:30:09.310021 IP my_server.45440 > 8.8.4.4.domain: 28349+ A? google.com. (28)

  Read the article

• Debian can't connect to internet using LAN

  - by tampe125

  I have a headless Raspberry Pi using Debian Wheezy. I have a wifi dongle and if I connect my Raspberry using it, everything works fine: I can connect to the Internet, I can ping, I can update. However, if I get down my wifi and set up the lan interface, I lost my internet connection. I still can connect locally, using my laptop, but the connection doesn't exit (ie ping is not working). Some useful info: cat /etc/network/interfaces auto lo auto eth0 iface eth0 inet static address 192.168.0.105 netmask 255.255.255.0 gateway 192.168.0.1 ping www.google.com (nothing request timed out) ifconfig eth0 Link encap:Ethernet HWaddr b8:27:eb:a2:b5:20 inet addr:192.168.0.105 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1130 errors:0 dropped:0 overruns:0 frame:0 TX packets:1116 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:97223 (94.9 KiB) TX bytes:146140 (142.7 KiB) ping 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. ^C --- 192.168.0.1 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18007ms cat /etc/resolv.conf nameserver 8.8.8.8 netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface default 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 192.168.0.0 * 255.255.255.0 U 0 0 0 eth0 well, I think that's all... Any ideas?

  Read the article

• Debian can't connect to internet using LAN

  - by tampe125

  I have a headless Raspberry Pi using Debian Wheezy. I have a wifi dongle and if I connect my Raspberry using it, everything works fine: I can connect to the Internet, I can ping, I can update. However, if I get down my wifi and set up the lan interface, I lost my internet connection. I still can connect to it locally, using my laptop, but the connection doesn't exit (ie ping is not working). Some useful info: cat /etc/network/interfaces auto lo auto eth0 iface eth0 inet static address 192.168.0.105 netmask 255.255.255.0 gateway 192.168.0.1 ping www.google.com (nothing request timed out) ifconfig eth0 Link encap:Ethernet HWaddr b8:27:eb:a2:b5:20 inet addr:192.168.0.105 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1130 errors:0 dropped:0 overruns:0 frame:0 TX packets:1116 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:97223 (94.9 KiB) TX bytes:146140 (142.7 KiB) ping 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. ^C --- 192.168.0.1 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18007ms cat /etc/resolv.conf nameserver 8.8.8.8 netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface default 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 192.168.0.0 * 255.255.255.0 U 0 0 0 eth0 well, I think that's all... Any ideas?

  Read the article

• Varnish gets in a restart loop and causes the system to lock up; how can I fix?

  - by chrism2671

  Here is an extract from the syslog. Mar 2 14:01:10 ip-10-226-34-17 varnishd[20204]: Child (20205) not responding to ping, killing it. Mar 2 14:01:16 ip-10-226-34-17 varnishd[20204]: Child (20205) not responding to ping, killing it. Mar 2 14:01:16 ip-10-226-34-17 varnishd[20204]: Child (20205) died signal=3 Mar 2 14:01:21 ip-10-226-34-17 varnishd[20204]: Child cleanup complete Mar 2 14:01:21 ip-10-226-34-17 varnishd[20204]: child (13224) Started Mar 2 14:01:21 ip-10-226-34-17 varnishd[20204]: Child (13224) said Closed fds: 4 5 6 10 11 13 14 Mar 2 14:01:21 ip-10-226-34-17 varnishd[20204]: Child (13224) said Child starts Mar 2 14:01:21 ip-10-226-34-17 varnishd[20204]: Child (13224) said managed to mmap 536870912 bytes of 536870912 Mar 2 14:01:21 ip-10-226-34-17 varnishd[20204]: Child (13224) said Ready Mar 2 14:01:35 ip-10-226-34-17 varnishd[20204]: Child (13224) not responding to ping, killing it. Mar 2 14:02:10 ip-10-226-34-17 last message repeated 7 times Mar 2 14:03:15 ip-10-226-34-17 last message repeated 13 times Mar 2 14:03:20 ip-10-226-34-17 varnishd[20204]: Child (13224) not responding to ping, killing it. Mar 2 14:05:53 ip-10-226-34-17 varnishd[20204]: Child (13224) not responding to ping, killing it. Mar 2 14:05:53 ip-10-226-34-17 varnishd[20204]: Child (13224) not responding to ping, killing it. Mar 2 14:05:53 ip-10-226-34-17 varnishd[20204]: Child (13224) died signal=3 Mar 2 14:05:53 ip-10-226-34-17 varnishd[20204]: Child cleanup complete Mar 2 14:05:53 ip-10-226-34-17 varnishd[20204]: child (13288) Started I'm not expecting a solution here but any help just to decode what each line is doing would be very instructive. Many thanks!

  Read the article

• Basic connectivity issues between Win 7 and XP mixed wired/wireless network.

  - by Pulse

  Setup: Windows 7 x64 Ultimate desktop hard wired to Asus WL500gp router (WL500gpv2-1.9.2.7-d-r1445 firmware) Several Bridged VirtualBox VM's running XP, 7, ubuntu server 10.04, Mint 9 and SuSE 11.2 Win XP Pro SP3 notebook with D-Link Airplus wireless network card. No firewall or other security software currently running on either platform (at least for the duration of the test) Situation: Router is acting DHCP server Clients are receiving correct addresses and additional parameters Internet connectivity is available from all clients Windows 7 sharing is set to Network type = work (not home group) NetBT is disabled on all clients using smb over TCP What I can do: I can ping the router and internet addresses from the wireless XP notebook I can ping the Win 7 desktop and any VM from the XP wireless notebook I can ping all devices from the router All VM's and 7 can ping each other and the router as well as Internet addresses What I can't do: I cannot ping the XP wireless notebook from either The Win 7 desktop or the VM's it alwats returns a destination host unreachable. Tracert resolves the name or the XP notebook but also returns a destination host unreachable. From the above it would seem that something is blocking connectivity in a single direction (from the Win 7 box to the Win XP notebook) only but the router can ping the XP notebook. Some fresh input would be most welcome, as this is beginning to drive me batty. Thanks

  Read the article

• KVM virtual machine unable to access internet

  - by peachykeen

  I have KVM set up to run a virtual machine (Windows Home Server 2011 acting as a build agent) on a dedicated server (CentOS 6.3). Recently, I ran updates on the host, and the virtual machine is now unable to connect to the internet. The virtual network is running through NAT, the host has an interface (eth0:0) set up with a static IP (virt-manager shows the network and its IP correctly), and all connections to that IP should be sent to the guest. The host and guest can ping one another, but the guest cannot ping anything above the host, nor can I ping the guest from anywhere else (I can ping the host). Results from the guest to another server under my control and from an external system to the guest both return "Destination port unreachable". Running tcpdump on the host and destination shows the host replying to the ping, but the destination never sees it (it doesn't even look like the host is bothering to send it on at all, which leads me to suspect iptables). The ping output matches that, listing replies from 192.168.100.1. The guest can resolve DNS, however, which I find rather odd. The guest's network settings (connection TCP/IPv4 properties) are set up with a static local IP (192.168.100.128), mask of 255.255.255.0, and gateway and DNS at 192.168.100.1. When originally setting up the vm/net, I had set up some iptables rules to enable bridging, but after my hosting company complained about the bridge, I set up a new virtual net using NAT and believe I removed all the rules. The VM's network was working perfectly fine for the last few months, until yesterday. I haven't heard anything from the hosting company, didn't change anything on the guest, so as far as I know, nothing else has changed (unfortunately the list of packages updated has since fallen off scrollback and I didn't note it down).

  Read the article

• Basic connectivity issues between Win 7 and XP mixed wired/wireless network. [Solved]

  - by Pulse

  Setup: Windows 7 x64 Ultimate desktop hard wired to Asus WL500gp router (WL500gpv2-1.9.2.7-d-r1445 firmware) Several Bridged VirtualBox VM's running XP, 7, ubuntu server 10.04, Mint 9 and SuSE 11.2 Win XP Pro SP3 notebook with D-Link Airplus wireless network card. No firewall or other security software currently running on either platform (at least for the duration of the test) Situation: Router is acting DHCP server Clients are receiving correct addresses and additional parameters Internet connectivity is available from all clients Windows 7 sharing is set to Network type = work (not home group) NetBT is disabled on all clients using smb over TCP What I can do: I can ping the router and internet addresses from the wireless XP notebook I can ping the Win 7 desktop and any VM from the XP wireless notebook I can ping all devices from the router All VM's and 7 can ping each other and the router as well as Internet addresses What I can't do: I cannot ping the XP wireless notebook from either the Win 7 desktop or the VM's; it always returns a destination host unreachable error. Tracert resolves the name or the XP notebook but also returns a destination host unreachable. From the above it would seem that something is blocking connectivity in a single direction (from the Win 7 box to the Win XP notebook) only but the router can ping the XP notebook. Some fresh input would be most welcome, as this is beginning to drive me batty. Thanks

  Read the article

• Intranet machines refuse to talk anymore

  - by ashes999

  I have two machines on the local intranet. They used to be able to talk to each other (ping, share files, etc.). Both are not successfully connected to the internet. The problem machine (lets call it test machine) can't talk to my main machine. The test machine can ping other machines on the intranet (at least one of my coworkers), but not mine. Odd. When I try to ping it from my machine, by machine name, I get Destination host unreachable. Both machines are on the intranet, with the network configured as Work Both machines have Windows Firewall disabled temporarily Both machines can talk to the internet (Google, SO, etc.) Neither machine can ping the other I need help resolving this. What I really want to achieve, is to remote into the test machine from my main machine, like I used to be able to do a few weeks ago. Some notes: Tried arp -a on both machines. I don't see the other machine's IP listed. Both machines have stable IPs; neither seems to have an IP conflict The configuration under ipconfig /all on my main machine mathces my coworker's machine. The test machine can ping his machine, but not my machine. The target machine times out trying to ping the main machine; the main machine gives me Destination host unreachable. I have rebooted both machines (several times) to no avail I have /release and /renewed both machines several times

  Read the article

• Using iptables to make a VPN router

  - by lost_in_the_sauce

  I am attempting to make a VPN connection to a third party VPN site, then forward traffic from my internal computers (ssh and ping for now) out to the VPN site using IPTables. 3rd Party <- (tun0/eth0)Linux VPN Box(eth1) <- Windows7TestBox I am running on CentOS 6.3 Linux and have two network connections eth0-public eth1-private. I am running vpnc-0.5.3-4 which is currently connecting to my destination. When I connect I am able to ping the destination IPAddresses but that is as far as I can get. ping -I tun0 10.1.33.26 success ping -I eth0 10.1.33.26 fail ping -I eth1 10.1.33.26 fail I have my private network Windows 7 test box set up to have the eth1 (private) network of my VPN Server as its gateway and can ping him fine. I need IPTables to send the Windows 7 traffic out the VPN tunnel. I have tried for a few days many different IPTables configurations from this site and others, either the other examples are too simple or overly complicated. The only thing this server is doing is connecting to the VPN and forwarding all traffic. So we can "flush" everything and start from scratch here. It is a blank slate. #!/bin/bash echo "Define variables" ipt="/sbin/iptables" echo "Zero out all counters" $ipt -Z $ipt -t nat -Z $ipt -t mangle -Z echo "Flush all active rules, delete all chains" $ipt -F $ipt -X $ipt -t nat -F $ipt -t nat -X $ipt -t mangle -F $ipt -t mangle -X $ipt -P INPUT ACCEPT $ipt -P FORWARD ACCEPT $ipt -P OUTPUT ACCEPT $ipt -t nat -A POSTROUTING -o tun0 -j MASQUERADE $ipt -A FORWARD -i eth1 -o eth0 -j ACCEPT $ipt -A FORWARD -i eth0 -o eth1 -j ACCEPT $ipt -A FORWARD -i eth0 -o tun0 -j ACCEPT $ipt -A FORWARD -i tun0 -o eth0 -j ACCEPT Again I have done many variations of the above and many other rules from other posts but haven't been able to move forward. It seems like such a simple task, and yet....

  Read the article

• Two network adapters on Ubuntu Server 9.10 - Can't have both working at once?

  - by Rob

  I'm trying to set up two network adapters in Ubuntu (server edition) 9.10. One for the public internet, the other a private LAN. During the install, I was asked to pick a primary network adapter (eth0 or eth1). I chose eth0, gave the installer the details listed below in the contents of /etc/network/interfaces, and carried on. I've been using this adapter with these setting for the last few days, and every thing's been fine. Today, I decide it's time to set up the local adapter. I edit the /etc/network/interfaces to add the details for eth1 (see below), and restart networking with sudo /etc/init.d/networking restart. After this, attempting to ping the machine using it's external IP address fails, but I can ping it's local IP address. If I bring eth1 down using sudo ifdown eth1, I can successfully ping the machine via it's external IP address again (but obviously not it's internal IP address). Bringing eth1 back up returns us to the original problem state: external IP not working, internal IP working. Here's my /etc/network/interfaces (I've removed the external IP information, but these settings are unchanged from when it worked) rob@rhea:~$ cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary (public) network interface auto eth0 iface eth0 inet static address xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx network xxx.xxx.xxx.xxx broadcast xxx.xxx.xxx.xxx gateway xxx.xxx.xxx.xxx # The secondary (private) network interface auto eth1 iface eth1 inet static address 192.168.99.4 netmask 255.255.255.0 network 192.168.99.0 broadcast 192.168.99.255 gateway 192.168.99.254 I then do this: rob@rhea:~$ sudo /etc/init.d/networking restart * Reconfiguring network interfaces... [ OK ] rob@rhea:~$ sudo ifup eth0 ifup: interface eth0 already configured rob@rhea:~$ sudo ifup eth1 ifup: interface eth1 already configured Then, from another machine: C:\Documents and Settings\Rob>ping [external ip] Pinging [external ip] with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for [external ip]: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), Back on the Ubuntu server in question: rob@rhea:~$ sudo ifdown eth1 ... and again on the other machine: C:\Documents and Settings\Rob>ping [external ip] Pinging [external ip] with 32 bytes of data: Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Ping statistics for [external ip]: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms So... what am I doing wrong?

  Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >