Search Results

Search found 1265 results on 51 pages for 'sam bloomberg'.

Page 20/51 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

• Is it possible to install a bootable version of Windows 7 onto a flash stick?

  - by sam

  I'm thinking of changing to a new laptop that only comes with a 256gb SSD. It's not tons of room, but not inadequate either. One thing I have on my HD at the moment that takes up a lot of room but is rarely used is a partition with a bootable version of Windows 7 (I'm on a mac). Would it be possible to install a bootable copy of Windows 7 onto a flash drive? I was thinking of using a 64gb Sandisk Cruzer USB 2.0, so that when I need to dip into Windows every now and again I could just plug in the flash drive.

  Read the article

• How to fix high Load_Cycle_Count laptop drive (TOSHIBA MK6006GAH in Vaio TX1XP)?

  - by Sam Brightman

  Hoping someone knows exactly what's going on here. It seems this drive has some combination of aggressive power saving settings and Ubuntu defaults that has massively increased the Load_Cycle_Count for the drive: https://wiki.ubuntu.com/DanielHahler/Bug59695 So the drive is now so slow that it cannot boot because it takes long enough to access the data that the kernel will not recognise it properly. I'm not worried about the data on the drive, but would really like to keep the laptop functioning. There is some indication that this is possible because the figure is still low 200,000s and most drives supposedly go to 600,000. Additionally, SMART tests pass and consider the drive healthy and without errors. But the really surprising thing was when I ran mhdd... Every single read came up red (slow) until I pressed 'R' for reset drive. I noticed the next read was normal speed, so held down 'R'. Magically the drive read perfectly for as long as I held the key BUT resumed slow (and noisy) seeking/reading after releasing. I don't think the source code to mhdd is available, so I'm not exactly sure what this means (besides, I don't know enough low-level HDD stuff either). It seems like the drive should be able to work, but is stuck trying to power save or something. There are no BIOS options on the laptop. Does anyone know how I can stop the drive from doing extremely slow/noisy operations like this? Or is constantly resetting the drive also damanging, and only causing it to work well by luck (i.e. not a suggestion that it's fixable)?

  Read the article

• Would requiring .Net 4.0 act as a bar to adopting our software in a corporate environment?

  - by Sam

  We are developing a software product in .Net targeting large corporates. The product has both server and desktop client components. We anticipate that our product will be used by a small subset of workers in the corporation - probably those in the Finance function. We currently require .Net 3.5 but are considering moving to .Net 4. Could anyone with experience of managing IT in such an environment tell us whether requiring .Net 4.0 at this stage would be a bar to adopting our software? What attitudes prevail regarding the use of frameworks like .Net?

  Read the article

• wireless dropping out

  - by Sam

  My wireless network connection is dropping out and its driving me nuts. It is weird because it happens at totally random intervals and other devices work while my computer has been dropped. Both my USB dongle and wifi card randomly disconnect from the router and I am unable to connect for a couple of minutes. It is especially irritating because two different adapters are failing at the same time, sounds like a software problem to me, but where? Both my laptop and iPod remain connected when the connection drops. What on earth is happening? I doubt its the router because the other devices would disconnect as well.

  Read the article

• Can't mount hard drive. Ubuntu 12.04

  - by Sam

  I am trying to recover some pictures on my 320 GB Hard Disk, so I put in a Live Ubuntu CD and am in that right now. In the devices list, it shows my USB drive, but not my 320 GB Hard Disk. I can see the disk in Disk Utility (it says it's on /dev/sda), but it's not mounted, and it says it has a few bad sectors but it is OK. In Disk Usage Analyzer, it says my maximum capacity is 13.4 GB, so it's definitely not using the 320 GB Hard Disk. I tried the following: sudo mkdir /media/newhd (worked) sudo mount /dev/sda /media/newhd (didn't work. it says I must specify the filesystem type) I then tried: fsck.ext4 -f /dev/sda (didn't work. Said: Superblock invalid, trying to backup blocks. then: Bad magic number in super-block while trying to open /dev/sda. The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock) Does anyone have any ideas? The whole problem started when my Windows Vista said "Can't find operating system". Any ideas on how I can get on to my hard drive at /dev/sda?

  Read the article

• Computer powers off then tries to start up but resets repeatedly.

  - by Sam Holder

  My machine has started shutting itself off after a few minutes on, everything goes off. A few seconds (3-5) after everything has stopped the lights come back on, the cpu fan and gfx card come on again. They spin for a second, then everything goes off again. A few seconds later same things happens again, light come back on, fans spin for a few seconds then go off. This repeats seemingly forever. If I leave it for a while I can power the machine back on for a while and it will boot again. It will then stay on for a little while again before power off. Rinse and repeat. Is this likely to be power supply or something else? The machine has been up and running for a couple of years before this.

  Read the article

• Grub rescue, unknown file system. Can't boot into Windows 7

  - by Sam J

  So, I'm confused, so I'm also going to use this question to get clarification and fix my computer. So, some background: I had Windows 7 on a 1 TB HDD and decided to partition my hard drive into two ~500 GB, one for Windows 7 and one for Ubuntu or whatever flavour I desired (like a sandbox partition...) I installed Ubuntu but the installation had issues so I decided to uninstall. Note before uninstallation I had to press f12 when I turned on to boot from my primary HDD, then choose what OS I wanted to use. Undesirable, but it worked. Anyway, after I decided to uninstall Ubuntu I went into Windows 7 Start Computer Manage and deleted the EXT4 filesystem (Ubuntu parition) giving me 4xx GB of free space. However when I restarted Windows 7, I am now unable to boot Windows. When I DON'T hit f12, I see a blank screen with a flashing underscore. When I DO hit f12, I choose my primary HDD, and then I get a GRUB error: Unknown filesystem: grub rescue _ Something I'm unclear of: GRUB boots linux partitions, right? What boots Windows? Is GRUB "overwriting" the Windows bootloader? How can I completely get Windows back to normal? (IE, It boots automatically without hitting f12.) Thanks for any help, I'm on a live CD version of Ubuntu right now until I can get back on Windows.

  Read the article

• Wireless N extend G range?

  - by Sam

  I've searched all over the internet for an answer to this and I can't find one. If I purchase a wireless N router, with greater range than my current G router will the range of the wireless G signal go as far as the wireless N signal? I say this because Wireless N routers are supposed to be compatible with wireless G devices. Is the wireless G a lesser signal coming out of the router? Sorry if I confused you, I am a little confused myself.

  Read the article

• nginx php-fpm keeps downloading files

  - by Sam Williams

  vhost: server { listen *:8080; location / { root /var/www/default/pub; index index.php; # if file exists return it right away if (-f $request_filename) { break; } if (!-e $request_filename) { rewrite ^(.+)$ /index.php$1 last; break; } } # serve static files directly location ~* \.(jpg|jpeg|gif|css|png|js|ico|html)$ { access_log off; expires max; } location ~* \.php$ { # By all means use a different server for the fcgi processes if you need to fastcgi_pass 127.0.0.1:9000; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_script_name; include /usr/local/nginx/conf/fastcgi_params; } location ~ /\.ht { deny all; } } http://192.168.135.128/index.php loads just fine... http://192.168.135.128/public_/html/index.php downloads...

  Read the article

• what is the best wireless router?

  - by sam

  what is the best wireless router out there? performance compatibility

  Read the article

• Is there a way of disabled byte-range requests in Apache?

  - by Sam Minnée

  I have a web page with a link to a PDF file (target="_blank"). If I click the link, the PDF reader just shows a grey screen within the Firefox browser. If I copy that link and manually open it in a new tab, the PDF will display correctly, and subsequent requests made by clicking the original link now work, suggesting that the problem occurs when loading the file into the cache. It appears as though the Adobe PDF reader plugin is making byte-range requests (I see lots of 206 responses) and I suspect that this may be the cause of the issue. I am running an Apache webserver. Has anyone had problems with Apache and Adobe's byte-range requests? Are there any workarounds? Perhaps a way of configuring Apache to ignore byte-range requests on PDFs?

  Read the article

• How can I disable my laptop's built-in keyboard?

  - by sam

  I have a HP Compaq Presario C700 laptop with Windows 7 installed on it. My laptop's keyboard is not working properly; some keys never work and some keys will keep on pressing. I've formatted the OS but it didn't solve my problem. I bought an external USB keyboard and it works well. As some keys in the built-in keyboard activate themselves, I still couldn't work effectively. After searching Google I tried the following steps to disable the built-in keyboard: Disabled keyboard drivers: This didn't work because when the system reboots, the driver gets installed again automatically. Installed irrelevant driver for keyboard: This failed - I couldn't install the driver. After rebooting it installed the correct driver automatically. Can anyone help explain how I can temporarily uninstall my built-in keyboard? I don't want to remove it manually (removing the hardware cable).

  Read the article

• How to partition my hard drive, quicker?

  - by Sam

  When I install Windows 7 on my hard drive, it makes three partitions. One with the OS itself, one with bootmgr inside (that is 100 MiB), and one with the factory image (all the crapware from HP). My final goal is to have the OS on a partition of 100 GiB and keep the rest (900 GiB) for storage. I thought it would be easy using gparted, but it is taking so long. It will take hours. There must a way to partition the drive before installing Windows. Yeah, because what I think makes the shrinking/moving of the partitions take so long is because they are not empty (am I wrong?).

  Read the article

• IPTables configuration help

  - by Sam

  I'm after some help with setting up IPTables. Mostly the configuration is working, but regardless of what I try I cannot allow localhost to access the local Apache only (i.e. localhost to access localhost:80 only). Here is my script: !/bin/bash Allow root to access external web and ftp iptables -t filter -A OUTPUT -p tcp --dport 21 --match owner --uid-owner 0 -j ACCEPT iptables -t filter -A OUTPUT -p tcp --dport 80 --match owner --uid-owner 0 -j ACCEPT Allow DNS queries iptables -A OUTPUT -p udp --dport 53 -j ACCEPT iptables -A OUTPUT -p tcp --dport 53 -j ACCEPT Allow in and outbound SSH to/from any server iptables -A INPUT -p tcp -s 0/0 --dport 22 -j ACCEPT iptables -A OUTPUT -p tcp -d 0/0 --sport 22 -j ACCEPT Accept ICMP requests iptables -A INPUT -p icmp -s 0/0 -j ACCEPT iptables -A OUTPUT -p icmp -d 0/0 -j ACCEPT Accept connections from any local machines but disallow localhost access to networked machines iptables -A INPUT -s 10.0.1.0/24 -j ACCEPT iptables -A OUTPUT -d 10.0.1.0/24 -j DROP Drop ALL other traffic iptables -A OUTPUT -p tcp -d 0/0 -j DROP iptables -A OUTPUT -p udp -d 0/0 -j DROP Now I have tried many permutations and I'm obviously missing everything. I place them above the in/out bound SSH to/from, so it's not the precedence order. If someone could give me the heads up on allowing only the local machine to access the local web server, that'd be great. Cheers guys.

  Read the article

• Output the number of cores and speed of a server?

  - by Sam

  I have access to another college's standalone server and am running several experiments on it. However, I don't know how many cores or the speed of the cores in the machine. Is there a way to get that information through the command line? Right now I'm accessing it through SSH.

  Read the article

• How to scrub a document of all text between brackets with find and replace

  - by sam

  I have a log file and I need to find all instances of <password> hash here </password> and remove the hash and replace it with some dummy text like aaa-aaa-aaa-aaaa. The recurring search argument is anything that matches a bracket that starts with <password> and ends with </password>. All the hashes being replaced will be different. What's the easiest way to go a bout this? The log is on a windows machine. Probably easiest would be to use MS word for me, unless it's achievable with wordpad, notepad, or some other light weight editor like textpad. thanks

  Read the article

• Procedure for dual booting (2 copies of Win-7) off 2 partitions on same disk

  - by Sam Holder

  What procedure should I follow to set a dual boot (both Win-7 x64) on a machine where (ideally): Both operating systems will be installed on the same physical disk in different partitions When booting into either operating system the contents of the other OS partition disk will not be seen (this just seems safer) Other hard drives in the system will be visible by both OS's 1 copy of Win7 is already installed. Is it as simple as shrinking the existing volume and creating the partition, then sticking the CD in and booting off it and formatting the new partition and then installing another copy of windows onto the new partition? Or will that not work? Or are there gotchas?

  Read the article

• How can I set a network connection as metered?

  - by Sam

  I would like to set a network connection as metered. I can't find how to do this; it seems to have changed in the upgrade from Windows 8 to 8.1. I tried following the steps in the official metered connection FAQ. However, when I open the connection, there is no Data Usage heading nor a Set as a metered connection option. I tried this on two different computers, both running Windows 8.1. I also tried doing this for both wireless and ethernet adaptors. Here's what the connection screen looks like. I've cropped the empty space from the image. How can I set the connection to metered?

  Read the article

• How do I disable video thumbnails in Windows 7?

  - by Sam

  I'd like to turn off Windows 7 video thumbnails displayed in . I found this solution for Windows XP but it doesn't work for Windows 7 ("The module shmedia.dll failed to load"). http://superuser.com/questions/133188/disable-thumbnails-in-windows-xp

  Read the article

• Pictures Are Printed Extremely Dark

  - by Sam

  Problem I printed a picture using Windows Photo Viewer, and the resulting print was significantly darker than the original image. It was almost completely black. I'm using a Brother HL-2270DW printer. Troubleshooting Checked Windows's Colour Profile for printer: not set Checked available installed colour profiles: didn't see specific to this printer What doesn't work Printing it from Windows Photo Viewer Printing it from Paint.NET What works The printer's built-in self-test print page Windows's test print page Printing text from Notepad++ So the problem might be specific to: How Windows prints photos/pictures The picture How the printer prints photos/pictures

  Read the article

• Setting up Mail (Ubuntu Server 10.04)

  - by Sam

  It seems that mail on my server is functional -- kind of. I have a simple PHP mailer script that is capable of mailing any email address that is not local. e.g [email protected] However, if I try [email protected], it tells me /home/myuser/dead.letter... Saved message in /home/myuser/dead.letter and sometimes You have new mail. What does this mean? Does anyone know what I can do to make my emails actually go through? I'm using google apps for domains -- so basically gmail is hosting my domain's email and I'm not using my own servers for receiving mail. I've set up the nameservers correctly -- I wonder if it's got to do with my sending configuration (what does PHP's mail function normally send with anyway, sendmail?) or maybe it's my receiving configuration -- maybe something makes it act differently for "local" mail

  Read the article

• Debian Squeeze - Monitor outgoing traffic

  - by Sam W.

  I have a small webserver that running on Lighttpd 1.4 which steadily uses 250GB or less bandwidth for the past couple of months. But since May the traffic spikeed to more than triple of what it was. Nothing special was on my site to make its spike like that. When I checked with vnstat I found that 70% of the bandwidth is tx. I suspect I've been hacked and my webserver is becoming some sort of bot. ClamAV comes out with nothing and I already replaced the Joomla installation with a fresh one, early in June. But right now the traffic stayed the same. My question, how can I monitor my server and look what is transmitting all that data out? My need to be done to pinpoint what is the culprit. Can someone please point to the right way to solve this? Thank you.

  Read the article

• Propagaging Apache rules Automatically for all folders Beneath Root [closed]

  - by Sam

  Hi folks, my webroot folder /httpdocs folder contains a .htaccess file The first lines look like this: RewriteEngine on RewriteBase / AddDefaultCharset UTF-8 Options +FollowSymLinks -Indexes -ExecCGI # DirectoryIndex index.php /index.php # ServerSignature Off Now, I want all settings that I have set it to, to be propagated automatically to other folders as well. How can I do that? Thanks very much for suggestions.

  Read the article

• Speeding up ping

  - by sam

  We have pretty slow internet which makes working online quite tedious some times the internet is just generally slow, 600ms ping, 0.90mb download. (we are in Londnon, can you beleive). But other times the internet download speed is ok 5-8mb but the ping in 600ms is there a way we can speed this up. Good performance would be 5-10mb 30ms ping at our location, which we sometimes get in the morning. Resetting the router always seem to solve the ping issue for about 10 minutes but then it slows down again, any idea whats governing the ping and if anything can be done to address it ?

  Read the article

• Small WiFi Network In a Noisy Environment

  - by Sam Skuce

  My company is demoing our network enabled products at big conferences. For this purpose, we would like to be able to set up a small WiFi network in our booth with a range of less than 10 meters. We will only be connecting the device that we are demoing and the iPad or PC running our demo software. I understand that there are conferences that won't allow you to run your own WiFi equipment, but some fairly big ones do (e.g. IMTS, which we were just at). I know that the AP should be encrypted and not broadcast its SSID, but are there additional equipment considerations to deal with the high level of RF noise in such an environment? Is there a particular technology that I should be looking at?

  Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >