Search Results

Search found 1771 results on 71 pages for 'steve hiner'.

Page 20/71 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

• Do I need to be worried about these SMART drive temperatures?

  - by Steve Lorimer

  I have 5 hard drives in a machine sitting in a cupboard. /dev/sda is a 500GB Seagate drive, and is the boot disk. /dev/sd{b,c,d,e} are 2TB drives in a raid6 configuration. smartctl is showing significantly higher temperatures (like ~140 degrees celsius) on the raid drives than the boot drive. Do I need to be worried? /dev/sdb and /dev/sde are new Western Digital Black drives (new=1 week) /dev/sdc and /dev/sdd are 5 year old Hitachi drives /dev/sda [SAT], Temperature_Celsius changed from 40 to 39 /dev/sdc [SAT], Temperature_Celsius changed from 142 to 146 /dev/sdc [SAT], Temperature_Celsius changed from 146 to 142 /dev/sdd [SAT], Temperature_Celsius changed from 142 to 146 /dev/sda [SAT], Airflow_Temperature_Cel changed from 61 to 62 /dev/sda [SAT], Temperature_Celsius changed from 39 to 38 /dev/sde [SAT], Temperature_Celsius changed from 107 to 108 /dev/sdb [SAT], Temperature_Celsius changed from 108 to 109 /dev/sdc [SAT], Temperature_Celsius changed from 146 to 150 /dev/sdc [SAT], Temperature_Celsius changed from 146 to 150 /dev/sda [SAT], Airflow_Temperature_Cel changed from 62 to 61 /dev/sda [SAT], Temperature_Celsius changed from 38 to 39 Update: Adding detailed drive information as per request: /dev/sda =========================== smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.9.10-100.fc17.x86_64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Pipeline HD 5900.2 Device Model: ST3500312CS Serial Number: 5VV47HXA LU WWN Device Id: 5 000c50 02aad5ad6 Firmware Version: SC13 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5900 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 1.5 Gb/s (current: 1.5 Gb/s) Local Time is: Tue Jun 3 10:54:11 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled /dev/sdb =========================== smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.9.10-100.fc17.x86_64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD2003FZEX-00Z4SA0 Serial Number: WD-WMC1F1398726 LU WWN Device Id: 5 0014ee 003b8bd25 Firmware Version: 01.01A01 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Jun 3 10:54:11 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled /dev/sdc =========================== smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.9.10-100.fc17.x86_64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K3000 Device Model: Hitachi HDS723020BLA642 Serial Number: MN1220F30WSTUD LU WWN Device Id: 5 000cca 369cc9f5d Firmware Version: MN6OA580 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Jun 3 10:54:11 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled /dev/sdd =========================== smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.9.10-100.fc17.x86_64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K3000 Device Model: Hitachi HDS723020BLA642 Serial Number: MN1220F30WST4D LU WWN Device Id: 5 000cca 369cc9f48 Firmware Version: MN6OA580 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Tue Jun 3 10:54:11 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled /dev/sde =========================== smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.9.10-100.fc17.x86_64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD2003FZEX-00Z4SA0 Serial Number: WD-WMC1F1483782 LU WWN Device Id: 5 0014ee 3002d235c Firmware Version: 01.01A01 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Tue Jun 3 10:54:11 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled

  Read the article

• XML Schema For MBSA Reports

  - by Steve Hawkins

  I'm in the process of creating a script to run the command line version of Microsoft Baseline Security Analyzer (mbsacli.exe) against all of our servers. Since the MBSA reports are provided as XML documents, I should be able to write a script or small program to parse the XML looking for errors / issues. I'm wondering if anyone knows whether or not the XML schema for the MBSA reports is documented anywhere -- I have goggled this, and cant seem to find any trace of it. I've run across a few articles that address bits and pieces, but nothing that addresses the complete schema. Yes, I could just reverse engineer the XML, but I would like to understand a little more about the meaning of some of the tags. Thanks...

  Read the article

• Port forwarding problem

  - by Steve

  I have a modem connecting to ADSL2 network and a router connecting to the modem. The rest of the machines all connect to the router. The modem has IP as 192.168.1.1 and the router's IP is 192.168.0.1. From the modem configuration, I can see that the modem thinks the router's IP is 192.168.1.2. I can visit the router by either using 192.168.0.1 or 192.168.1.2. Now I forward a port from the router to a private machine. It works. I can test it by typing 192.168.1.2 and it is redirected to the private machine. But if I use 192.168.0.1, it is still the router's configuration page. I also do a port forwarding on my modem. Since the modem sees only the router, I can only forward the port to the router's specific port. And I am thinking that by doing this, I can reach the private machine after two times port forwarding, once on the modem and once on the router. I also have a static public IP. I want to achieve the goal that when someone types the public IP, he will be redirected to the private machine. But when I use some online port forwarding tester, the result always says that the port is closed on the public IP. I have the questions: Why my router has two IPs? Why using one IP I can see the port forwarding result while using the other I cannot? I think the port forwarding only works when visiting from outside, rather than from both outside and inside. Otherwise, if I set port forwarding on my router/modem on port 80, I will never be able to see its original configuration page again. Everything is forwarded. Am I right? How can I achieve my goal described above? By achieve this, I will have a dedicated server of my own and the users can visit from the public IP. Anyone can correct me on any mistakes I made? I am using Netconn modem and D-Link DIR-300 router. Thank you very much for any help. Edit: Consider I have correctly setup the whole thing. Now I want to test my website by using public IP to visit it, but the port forwarding doesn't work. Does it consider that I am inside the local network and not using the port forwarding? If so, how can I do it? I ask my friends (outside my local network) to have a try and they can see the website. What should I do so that from the inside, I can do the testing? Thank you very much.

  Read the article

• Squid Authentication & streaming

  - by Steve Butler

  I've got squid setup using Kerberos authentication. I'm also using squidguard as an URL redirector to block out the usual nastiness of the web. There are some sites though that we allow certain users to, and others not. This all works well, assuming I'm not using any streaming. From what i can determine from the squid logs and the wireshark traces I've done, when the initial request to stream is sent, everything is good, the authenticated username is sent with the request to squidguard. The problem is that on subsequent traffic the username is not sent to squidguard, causing it to be blocked based on default policy. I've tried using the squid built-in allow/deny stuff, but its relatively clunky, and so far squidguard has been pretty easy and fast. Here comes the question(s): How do i get Squid to pass username on all requests? (something tells me this isn't the best way) How do i get squidguard to see traffic is authenticated to a specific user even when a username isn't passed? Is there any other way of accomplishing this? A few details that may be of importance: I'm using a list of users stored in a text file for squidguard to compare against. I'm using full kerberos auth with Squid. CentOS 6.0 Squid 3.1.4 Squidguard 1.3

  Read the article

• CentOS Failover Cluster - SIOCADDRT: No such process (when adding a loopback)

  - by Steve Rolfe

  I'm trying to configure two web servers for a load balancing server. The load balancing aspect works fine (it sees both server, kills 'em if it needs to, and seems to direct traffic fine). The only issue is with the servers looping: /etc/sysconfig/network-scripts/ifcfg-lo:0 DEVICE=lo:0 IPADDR=<Virtual IP> NETMASK=255.255.255.255 ONBOOT=yes NAME=loopback Everytime I try a "service network restart" I get a SIOCADDRT: No such process when loading the loopback interface. Anyone have an idea what's causing this?

  Read the article

• IE8 Windows 7 (64bit) security certificate problem

  - by Steve

  Hi, We have just received some new computers for use in the office (Dell Vostro). They seem to work fine in the main. When we use IE8 to go to some web pages such as yahoo mail it tells us: “There is a problem with this websites security certificate” If we have a look at the details it says: “This certificate cannot be verified up to a trusted certification authority” This however works correctly in Firefox. I don't understand why I should get such an error message, should this not just work? I don't think its anything to do with the certificate itself as this is happening on www.yahoo.co.uk and other commercial (amazon I think?) sites. I think there is something off with the PCs setup. The PC has Windows 7 (64 bit) and Norton Internet Security installed. Any ideas as to why this is happening? Thanks

  Read the article

• Windows 7 - Non Admin run as Admin for Explorer - still can't see all tmp internet files

  - by Steve

  I'm trying to retrieve video files from the IE 8 cache for a user that's not an admin in Win 7. As a non admin user, I run Explorer as admin and still can't see the temp internet files for the non admin user. Only if I login as a user that is admin can I see the files. Is there any way I can see the files w/o having to go through the login process? Essentially, I want the video file from this page and others like it: http://video.yahoo.com/watch/111585/1027823

  Read the article

• Proper network configuration for a KVM guest to be on the same networks at the host

  - by Steve Madsen

  I am running a Debian Linux server on Lenny. Within it, I am running another Lenny instance using KVM. Both servers are externally available, with public IPs, as well as a second interface with private IPs for the LAN. Everything works fine, except the VM sees all network traffic as originating from the host server. I suspect this might have something to do with the iptables-based firewall I'm running on the host. What I'd like to figure out is: how to I properly configure the host's networking such that all of these requirements are met? Both host and VMs have 2 network interfaces (public and private). Both host and VMs can be independently firewalled. Ideally, VM traffic does not have to traverse the host firewall. VMs see real remote IP addresses, not the host's. Currently, the host's network interfaces are configured as bridges. eth0 and eth1 do not have IP addresses assigned to them, but br0 and br1 do. /etc/network/interfaces on the host: # The primary network interface auto br1 iface br1 inet static address 24.123.138.34 netmask 255.255.255.248 network 24.123.138.32 broadcast 24.123.138.39 gateway 24.123.138.33 bridge_ports eth1 bridge_stp off auto br1:0 iface br1:0 inet static address 24.123.138.36 netmask 255.255.255.248 network 24.123.138.32 broadcast 24.123.138.39 # Internal network auto br0 iface br0 inet static address 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 bridge_ports eth0 bridge_stp off This is the libvirt/qemu configuration file for the VM: <domain type='kvm'> <name>apps</name> <uuid>636b6620-0949-bc88-3197-37153b88772e</uuid> <memory>393216</memory> <currentMemory>393216</currentMemory> <vcpu>1</vcpu> <os> <type arch='i686' machine='pc'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='cdrom'> <target dev='hdc' bus='ide'/> <readonly/> </disk> <disk type='file' device='disk'> <source file='/raid/kvm-images/apps.qcow2'/> <target dev='vda' bus='virtio'/> </disk> <interface type='bridge'> <mac address='54:52:00:27:5e:02'/> <source bridge='br0'/> <model type='virtio'/> </interface> <interface type='bridge'> <mac address='54:52:00:40:cc:7f'/> <source bridge='br1'/> <model type='virtio'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target port='0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes' keymap='en-us'/> </devices> </domain> Along with the rest of my firewall rules, the firewalling script includes this command to pass packets destined for a KVM guest: # Allow bridged packets to pass (for KVM guests). iptables -A FORWARD -m physdev --physdev-is-bridged -j ACCEPT (Not applicable to this question, but a side-effect of my bridging configuration appears to be that I can't ever shut down cleanly. The kernel eventually tells me "unregister_netdevice: waiting for br1 to become free" and I have to hard reset the system. Maybe a sign I've done something dumb?)

  Read the article

• Printer keeps going offline in Windows 7 XP Mode

  - by Steve Rowe

  Every time I reboot the computer, the printer in Windows 7 XP mode goes offline. I have to go back into the full XP mode and attach the printer again to make it work. I have the settings set to automatically attach the printer, but it doesn't appear to be working. Any ideas what might make it automatically re-attach? Does anyone see this working?

  Read the article

• Skipping scheduled self-tests and predicting drive EOL

  - by Steve Madsen

  For a few weeks now, smartd has been reporting that it is skipping some of its scheduled self-tests on the weekends: Apr 24 18:29:32 calvin smartd[4758]: Device: /dev/sda, skip scheduled Offline Immediate Test; 40% remaining of current Self-Test. Apr 24 18:29:33 calvin smartd[4758]: Device: /dev/sdb, skip scheduled Offline Immediate Test; 50% remaining of current Self-Test. The drives in this RAID-1 array are set to run an offline test four times a day, a short self-test at 2am every day, and a long self-test on Saturdays at 2am. For some reason, it looks like the long self-test is taking longer, causing the other scheduled tests to be skipped. First question: is this a sign of likely drive failure? Then today, smartd reported that a self-test failed. Here is the output of smartctl -a /dev/sdb: smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.8 family Device Model: ST3250823AS Serial Number: 3ND1GNBC Firmware Version: 3.03 User Capacity: 250,059,350,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sun Apr 25 13:15:34 2010 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 84) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 047 039 006 Pre-fail Always - 168450357 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 33 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 9 7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 654745480 9 Power_On_Hours 0x0032 055 055 000 Old_age Always - 40141 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 51 194 Temperature_Celsius 0x0022 037 062 000 Old_age Always - 37 (0 17 0 0) 195 Hardware_ECC_Recovered 0x001a 047 039 000 Old_age Always - 168450357 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 40131 - # 2 Extended offline Completed: read failure 30% 40129 379795511 # 3 Short offline Completed without error 00% 40084 - # 4 Short offline Completed without error 00% 40060 - # 5 Short offline Completed without error 00% 40036 - # 6 Short offline Completed without error 00% 40013 - # 7 Short offline Completed without error 00% 39990 - # 8 Extended offline Completed without error 00% 39977 - # 9 Short offline Completed without error 00% 39919 - #10 Short offline Completed without error 00% 39895 - #11 Short offline Completed without error 00% 39872 - #12 Short offline Completed without error 00% 39848 - #13 Short offline Completed without error 00% 39824 - #14 Short offline Completed without error 00% 39801 - #15 Extended offline Completed without error 00% 39789 - #16 Short offline Completed without error 00% 39754 - #17 Short offline Completed without error 00% 39732 - #18 Short offline Completed without error 00% 39707 - #19 Short offline Completed without error 00% 39683 - #20 Short offline Completed without error 00% 39660 - #21 Short offline Completed without error 00% 39636 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Given that this drive is about 4.5 years old, I am probably tempting fate by keeping it in service. SMART doesn't seem to get much respect as a reliable way to predict drive failure. What else can I use to get an early indication of drive failure?

  Read the article

• Getting GTalk and Alt-Tab to play nice

  - by Steve Armstrong

  I'm running GTalk on Windows 7, and it refuses to work properly with Alt-Tab. Let's say I've got 2 message windows open (msg1 and msg2) and the contact list, as well as Firefox. Alt-tab from Firefox to msg1 works, but now the contact list is the most recent thing in the alt-tab list (not Firefox as expected). Then there's the problem that I can't use alt-tab to select a specific message window, and when switching back to msg2 (showing msg2 in the alt-tab window) it might switch back and have focus on msg1. I found this thread complaining about the same problem, but it's over a year old, and I'm hoping some progress has been made.

  Read the article

• Classic ASP on large memory server

  - by Steve Evans

  I have a client with a large ASP app that apparently is fairly memory intensive. I’m helping them migrate to new hardware they have running Win2k8 R2. They have 4 physical servers with 32gb of RAM each. I’m making the assumption that ASP apps run as a x32 process. So I see that we have two options: On the application pool enable web gardens. Use the physical servers as VM hosts and split the box into say 4 web servers each. Any thoughts on which path will provide us better performance? I’m just not really sure how ASP will handle a machine with lots of memory, and I’m worried it won’t really be able to address the memory well. (you can ignore all the obvious stuff like increased maintenance of 16 web servers vs 4, or the flexibility virtualization gets us over physical servers, etc)

  Read the article

• Permanently hide network disconnected icon from system tray

  - by Steve

  On Windows XP, I have a disconnected Wireless connection which shows up in the System Tray. I have gone into Network Connections dialog box and elected not to show an icon when it is disconnected, yet it remains visible. I have gone into the Task bar properties and elected to always hide this icon, but that doesn't remove it from the system tray. How do I remove it? Thanks

  Read the article

• Can I easily use a VPN to duplicate SSH Tunneling functionality?

  - by Steve V.

  Right now, when I want to use an unsecured wireless connection with my (Linux) laptop, I secure my connection using a variation of the method provided here. However, to the best of my knowledge, the (non-jailbroken) iPad does not allow applications to tunnel traffic through local ports. However, it does seem to allow certain VPN traffic. I have never set up, or even used, a VPN before. I'm looking for confirmation that I'm not barking up the wrong tree before I invest significant effort into setting up my own VPN server. If I want to secure my wireless iPad traffic over an unsecure wireless connection, would I be on the right track by looking at a VPN?

  Read the article

• Internet Explorer 9 takes a long time to load websites

  - by Steve

  IE9 on Windows 7 would load Google okay, and we could search on Google okay, but almost any other website would take an inordinate amount of time to load. The loading sprite would sit there indefinitely. I uninstalled IE9 to roll back to IE8, and the same issue occurs. We've reset IE settings back to defaults, and there are no add-ons causing this. Firefox loads websites fine on this computer. Could it be an IE-specific virus/trojan? IE was displaying an incorrect/hijacked home page.

  Read the article

• Should I keep my swap file on an SSD drive?

  - by Steve Rowe

  I'm considering getting an SSD drive to run as the primary OS partition. As I understand, this should provide a substantial improvement in performance. My question is this: Should I leave the swap file on that drive? The swap partition will be largely random seeks and so should benefit from the speed. On the other hand, it will be constantly written to which will wear out the drive faster.

  Read the article

• Why do I have a different jump list for Outlook 2007

  - by Steve Crane

  I understand that the Windows 7 jump list for Outlook 2007 should look something like the one on the left, whereas mine, on the right contains only the three basic items and an ICS file I imported recently. I would like to have access to the commands for creating new items from my jump list. Can anyone explain why I don't get the other commands and what I might be able to do to enable them?

  Read the article

• Find out the type of an automounted device

  - by Steve Bennett

  I'm working on a system (Ubuntu Precise) with a mount defined in /etc/fstab as follows: /dev/vdb /mnt auto defaults,nobootwait,comment=cloudconfig 0 2 Originally I just wanted to find out if it's NFS (due to potential MySQL locking issues). Judging from man mount, it's not: If no -t option is given, or if the auto type is specified, mount will try to guess the desired type. Mount uses the blkid library for guessing the filesystem type; if that does not turn up anything that looks familiar, mount will try to read the file /etc/filesystems, or, if that does not exist, /proc/filesystems. All of the filesystem types listed there will be tried, except for those that are labeled "nodev" (e.g., devpts, proc and nfs). If /etc/filesystems ends in a line with a single * only, mount will read /proc/filesystems afterwards. But, out of curiosity now, how can I find out more about what type of device it actually is? (For context, this is a VM running on OpenStack. The device is a 60Gb allocation mounted from somewhere - but I don't know how.)` EDIT Including answers here: $ mount /dev/vdb on /mnt type ext3 (rw,_netdev) $ df -T /dev/vdb ext3 61927420 2936068 55845624 5% /mnt

  Read the article

• To Do list for multiple users using MySQL, Need some advice regarding Projectwork?

  - by Steve

  i am thinking to create a To Do list sort of thing for my Project work. it's sort of a To do list type thing, meant for Multiple Users. i mean each user will have his Login and Password , to access into his account or profile and from there he/she can Manage his own To-Do list. it's has to be Kind of like Remember the Milk sort of. Every user will have his own To Do list. i mean now as Different users will have Different To Dos to perform and so different To Dos Lists, if for data fields like in tabular form. Task || Priority || Deadline || Number of days required ||Status. -----||----------||----------||-------------------------||-------------------- -----||----------||----------||-------------------------||-------------------- -----||----------||----------||-------------------------||-------------------- So what i meant to ask , Can this type of thing be done using MySQL as database and and any web based server side language PHP, ASP, JSP. i mean Can this be done through RDBMS like MySQL, for here different member users will have different to do lists than each others to keep and maintain.

  Read the article

• Windows 7 homegroup sharing problem

  - by Steve Crane

  I have two machines in a homegroup. My desktop and my wife's laptop. The public folders like pictures, videos, etc. are shared fine. But if I try to share a single folder with the homegroup from the laptop, I don't see it on my desktop. I see suggestions of rebooting, leaving and rejoining the homegroup; even recreating the homegroup. Frankly, that's just ridiculous. If those are the only solutions then the feature is just not working as it should. Is it possible I'm experiencing these problems because I am still running the public beta of WIndows 7 (yeah I know, I need to get over my laziness and reinstall) while my wife is running the release version? Are there solutions to this problem that don't involve the somewhat drastic measures mentioned above?

  Read the article

• Multi screens are not aligning properly

  - by Steve

  I am using (4) Samsung (SMB2230) screens. When I place my mouse on the first screen at the bottom right and pull it into the second screen the mouse jumps to the middle on the left of the second screen. Then it does the same on the 3rd and 4th screens. The biggest jump is between the 1st and 2nd then it tightens up between 2 and 3 then close between 3 and 4. This is a really pain because my mouse gets hung up and I have to move up and down to get it to change screens.I had (4) Dells screens before and this didn't happen. I'm using Windows 7

  Read the article

• Looking for a free/cheap backup solution on OSX for NTFS external HDD [closed]

  - by Steve Middleton

  Hi, I'm looking for an incremental backup system on OSX that plays nice with USB NTFS-formatted external HDDs. I an currently using NTFS-3G (http://macntfs-3g.blogspot.com/) to work with the HDD, but since Time Machine doesn't work with NTFS drives, I have just been manually copying files from my HDD to back it up (ugh). I need to use an NTFS drive because I am going back and forth between Windows machines at my school and a mac at home. I have no permissions at my school to install any Windows software, so I am forced to find a OSX solution. Please -- any help you can give me would be greatly appreciated! Thanks!

  Read the article

• Adjust spacing between list elements in Word 2010

  - by Steve

  Is there a way to adjust the spacing between list elements in Word 2010? I can apply a style to the list, and then edit the style, and edit the spacing before and after the element, but this applies to the list, not the list element. There are no styles I can see which can be applied to a list element allowing the spacing between list elements to be adjusted. If I select 1 list element, and then adjust the spacing before or after in the Page Layout tab, this applies to the whole list, not the list element, which defeats the purpose.

  Read the article

• cannot move file: "file cannot be found" (Windows XP)

  - by Steve

  I have some CR2 files in a subfolder of My Documents called My Photos on a Windows XP PC. I want to move them across a WIFI network to an external HDD attached to a Windows 7 PC. I have read/write permissions on the external HDD, as I mapped to this HDD using the Windows 7 user account. When I try to move a single CR2 file, I receive "Cannot copy IMG_3317: Cannot find the specified file. Make sure you specify the correct path and file name." If I refresh the source folder, the file is still there. It is not read only, and I have read/write access to the source file. I can view its properties. Why can't I move this file? I have been able to move similar files in the past.

  Read the article

• MX Record for SubDomains

  - by Steve Sloka

  I want to be able to send email to any subdomain I like and not have to configure A records and MX records for each subdomain. Ideally I could send an email to [email protected] and [email protected] and not have to configure anything other than my original domain.com. My current setup: I have a domain (domain.com) and want to have multiple subdomains. (a.domain.com, b.domain.com, c.domain.com, etc). I have an MX record setup to point to domain.com and all email works fine for that domain. I have NOT setup A records for all the subdomains (and really don't want to).

  Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >