Search Results

Search found 1535 results on 62 pages for 'tim vaughan'.

Page 20/62 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

  • Rebuilding array on 3ware 9690SA-8I

    - by Tim Jones
    I have a RAID10 (8x1TB) array on a 3ware 9690 card running on an Ubuntu 1110 server. There was a kernel update so I scheduled a reboot after which the array was inaccessible. I checked the status a drive has died in the array, but the controller has thrown the entire array into an 'inoperable' state instead of simply degraded (what's the point of the RAID now ;-). After taking out the 'dead' drive I run a quick test to find it completely functional without a bad sector to be found. I try to put the drive back in but the array still marks the disk as degraded (remembering serial number or something??) and the entire array as inoperable... So I swap it out for a known working drive (not the same capacity but higher - should still work) and initiate a rebuild with the the new drive as a replacement. This fails instantly with the error "(0x0B:0x0033): Unit busy : Failed to start Rebuild on Unit 0". The unit shouldn't be busy as it is not mounted (the card itself is listed with lshw but the array it provides is not). I'm pretty much at an impasse now, I don't understand how I can have a single drive failure on a RAID10 that makes the entire array inaccessible, degraded I could understand but inaccessible?? I don't think the controller as prior to the reboot it was completely functional.

    Read the article

  • Query total page count via SNMP HP Laserjet

    - by Tim
    I was asked to get hold of the total pages counts for the 100+ printers we have at work. All of them are HP Laser or Business Jets of some description and the vast majority are connected via some form of HP JetDirect network card/switch. After many hours of typing in IP addresses and copying and pasting the relevant figure in to Excel I have now been asked to do this on a weekly basis. This led me to think there must be an easier way, as an IT professional I can surely work out some time saving method to solve this issue. Suffice it to say I do not feel very professional now after a day or so of trying to make SNMP work for me! From what I understand the first thing is to enable SNMP on the printer. Done. Next I would need something to query the SNMP bit. I decided to go open source and free and someone here recommended net-snmp as a decent tool (I would like to have just added the printers as nodes in SolarWinds but we are somewhat tight on licences apparently). Next I need the name of the MIB. For this I believe the HP-LASERJET-COMMON-MIB has the correct information in it. Downloaded this and added to net-snmp. Now I need the OID which I believe after much scouring is printed-media-simplex-count (we have no duplex printers, that we are interested in at least). Running the following command yields the following demoralising output: snmpget -v 2c -c public 10.168.5.1 HP-LASERJET-COMMON-MIB:.1.3.6.1.2.1.1.16.1.1.1 (the OID was derived from running: snmptranslate -IR -On printed-media-simplex-count Unlinked OID in HP-LASERJET-COMMON-MIB: hp ::= { enterprises 11 } Undefined identifier: enterprises near line 3 of C:/usr/share/snmp/mibs/HP-LASER JET-COMMON-MIB..txt .1.3.6.1.2.1.1.16.1.1.1 ) Unlinked OID in HP-LASERJET-COMMON-MIB: hp ::= { enterprises 11 } Undefined identifier: enterprises near line 3 of C:/usr/share/snmp/mibs/HP-LASER JET-COMMON-MIB..txt HP-LASERJET-COMMON-MIB:.1.3.6.1.2.1.1.16.1.1.1: Am I barking up the wrong tree completely with this? My aim was to script it all to output to a file for all the IP addresses of the printers and then plonk that in Excel for my lords and masters to digest at their leisure. I have a feeling I am using either the wrong MIB or the wrong OID from said MIB (or both). Does anyone have any pointers on this for me? Or should I give up and go back to navigationg each printers web page individually (hoping not).

    Read the article

  • Duplicity Full Backup Lifetime and Efficiency

    - by Tim Lytle
    I'm trying to work up a backup strategy for some clients, and am leaning towards duplicity for remote backup (already use rdiff-backup for internal/on location backups). Is it reasonable to want a full backup every so often? Since duplicity increments forward, each incremental backup is relying on the previous increment, and all are relying heavily on the last full backup. Should that become corrupt, bad things happen. A related question: Does Duplicity test the incremental backups for consistency? Assuming I do want a full backup every so often, how efficiently does duplicity create that full backup? Can/does it check file signatures and copy unchanged data from previous full backups/increments? Basically creating a new 'full' archive transferring new/changed data and merging existing unchanged data? Right now my concern is that running a full backup is needed, but the consistent large bandwidth use of full backups will make this unreasonable for some clients.

    Read the article

  • DNS slow after losing DNS Server

    - by Tim
    We have set up a small Windows Server 2008 R2 network with a domain controller which is also acting as the DNS server for the network (we opted to install DNS when setting up the domain). This network isn't connected to the Internet in any way, so all machines have been configured to use the IP address of the domain controller as their primary DNS and no secondary DNS server has been configured. If we shut down or unplug the network cable from the domain controller, DNS lookups become quite slow and the performance of the network suffers. For example, running a ping command using a hostname takes around 5-6 seconds to resolve the name. I presume this is because it is looking for the DNS, then falling back to some other method of resolving the names as the DNS server is now gone. All the machines have static IP addresses so we are considering just putting all entries in the HOSTS file of each machine. However, it would be nice to have a centralised DNS in case we one day change the IP of one of the machines. Is there a better way to speed this up?

    Read the article

  • Nginx, memcached and cakephp: memcached module always misses cache

    - by Tim
    I've got a simple nginx configuration; server{ servername localhost; root /var/www/webroot; location / { set $memcached_key $uri; index index.php index.html; try_files $uri $uri/ @cache; } location @cache { memcached_pass localhost:11211; default_type text/html; error_page 404 @fallback; } location @fallback{ try_files $uri $uri/ /index.php?url=$uri&$args; } location ~ \.php$ { fastcgi_param MEM_KEY $memcached_key; include /etc/nginx/fastcgi.conf; fastcgi_index index.php; fastcgi_intercept_errors on; fastcgi_pass unix:/var/run/php5-fpm.sock; } } I've got a CakePHP helper that saves the view into memcached using the MEM_KEY parameter. I have tested it and it's working, however, nginx is always going to the @fallback direction. How can I go about troubleshooting this behavior? Would could the problem be?

    Read the article

  • Unable to install Windows Installer 4.5 on Windows Server 2008

    - by Tim Trout
    One of the prerequisites for installing SQL Server 2008 Express R2 is Windows Installer 4.5. I have a couple of WS2008 machines I'm prepping, so I downloaded the appropriate version of the file (Windows6.0-KB942288-v2-x86.msu) to our file server and tried isntalling it on both machines. On both machines I get the cryptic 0x80070003 error: "the system cannot find the file specified", but it does not show which file it cannot find. I don't get this when I try to install the Windows XP version on one of my XP machines. Any clues as to what I might be missing or doing wrong? One Technet help forum suggested I try installing the "System Update Readiness Tool", but this installer also fails for the same error code.

    Read the article

  • Is the Intel Core i5 mobile processor better than the Intel Core i7 mobile processor?

    - by Tim Barnaski
    I'm shopping for a new laptop from Dell (going to install Ubuntu on it) and I'm currently trying to sort out which processor I want. Based purely on the clock speed, it would seem that the core i5 is better than the core i7. The Intel® Core™ i5-430M has a 2.26GHz clock speed, while the Intel® Core™ i7-720QM Quad Core Processor only has a 1.6GHz clock speed. Would this not indicate that the i5 is faster than the i7?

    Read the article

  • pfSense Firewall or Linsys/Cisco router for small offices

    - by Tim Meers
    I'm about to start switching some networks around for multiple small offices. Each office has about 10 to 15 users and 10 to 15 computers. Each office has a spread of generic routers and access points. The routers vary from being used as routers, to just being an access point for wireless. Nothing formal has really ever beem implemented for each of the 10 offices. What I'm wanting is to set up a pfSense box for each office to configure things like: traffic shaping (for VoIP QOS) URL Filtering DHCP static routing multiple VLANs I'll then use some of the existing hardware for wireless. Maybe even integrate the wireless right into the firewall depending on the office layout. So my question, would this be better to do a full blown firewall box, or but a new business class or high end consumer class Linksys router to do the URL filtering, QOS and DHPC? Each option could allow for remote access and VPN for remote maintnance and each would only cost a nominal about of money for something decent, i.e. under $250.

    Read the article

  • Google Talk Video Chat with Gmail and 3rd Party App

    - by Tim Lytle
    Google Talk video chat only works in Gmail (because that makes sense, right?); however, other IM apps (I'm using Empathy specifically) support video chat over Google Talk. But can you use video chat outside your 'client'? Can someone on Gmail video chat with someone on Empathy? I'm having problems doing that, and suspect it may because of an older (but certainly not that old) version of Empathy. But before I start troubleshooting I just wanted to make sure ti's possible. Because I believe at one time, it wasn't - correct?

    Read the article

  • SQL 2000: Intermittent Error 7399 with OLE DB Provider for Microsoft Jet

    - by Tim Lara
    I am using SQL Server 2000 on Windows Server 2003 SP2 and have set up a linked server to point at an Access 97 database using the OLE DB Provider 4.0 for Microsoft Jet. The problem I am having sounds almost exactly like the one described in this Microsoft KB article, except that the error I am getting is intermittent: http://support.microsoft.com/kb/814398 The SQL Server is running under the Local System account (which I don't have authority to change), and the Access 97 .mdb file that the linked server points to is on a Win XP Pro machine on the same LAN as the SQL Server machine, inside of a shared folder with permissions set to "Everyone" and "Full Control". Now, if the linked server connection never worked, it would make more sense that the problem is merely a permissions issue with the Local System account as the KB article above suggests, but the maddening thing is that sometimes the connection works just fine. When it fails, the error message is always the same: Error 7399: OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. [OLE/DB provider returned message: Unspecified error] OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize::Initialize returned 0x80004005: ]. Also, not only does the linked server setup occasionally work just fine on this one particular SQL Server, what is supposed to be exactly the same setup on 25 other servers works just fine EVERY TIME! Obviously, something in the non-working setup must not be exactly the same, but I'm having trouble figuring out where to look for the differences since the error message SQL Server returns is so vague. I know our sysadmins have had numerous issues with Active Directory replication across our domain, so my best guess is that there is some sort of odd group policy corruption going on, but I thought I'd ask here to see if I might be overlooking something more straightforward. Any ideas on how to further isolate the error would be greatly appreciated! For the record, here is a list of things I've already tried: Rebooting the SQL Server machine. Fixes the issue temporarily, then the error returns within a minute or two of startup. (This is why I suspect a rogue group policy that is slow to apply fouling things up.) Importing all database objects from the Access 97 mdb into a new, clean mdb file. Makes no difference. Moving the Access 97 mdb file to a local directory on the SQL Server machine instead of accessing it via a share on the Win XP Pro LAN machine. This works, but does not solve the problem because the mdb needs to be on the client machine for performance reasons and the ability to work "stand alone". Plus, the same shared folder access works fine on all other servers / clients on my network. Compared all the SQL Server, Windows Server, etc versions to a known working setup and everything appears to be the same.

    Read the article

  • SQL 2000: Intermittent Error 7399 with OLE DB Provider for Microsoft Jet

    - by Tim Lara
    I am using SQL Server 2000 on Windows Server 2003 SP2 and have set up a linked server to point at an Access 97 database using the OLE DB Provider 4.0 for Microsoft Jet. The problem I am having sounds almost exactly like the one described in this Microsoft KB article, except that the error I am getting is intermittent: http://support.microsoft.com/kb/814398 The SQL Server is running under the Local System account (which I don't have authority to change), and the Access 97 .mdb file that the linked server points to is on a Win XP Pro machine on the same LAN as the SQL Server machine, inside of a shared folder with permissions set to "Everyone" and "Full Control". Now, if the linked server connection never worked, it would make more sense that the problem is merely a permissions issue with the Local System account as the KB article above suggests, but the maddening thing is that sometimes the connection works just fine. When it fails, the error message is always the same: Error 7399: OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. [OLE/DB provider returned message: Unspecified error] OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize::Initialize returned 0x80004005: ]. Also, not only does the linked server setup occasionally work just fine on this one particular SQL Server, what is supposed to be exactly the same setup on 25 other servers works just fine EVERY TIME! Obviously, something in the non-working setup must not be exactly the same, but I'm having trouble figuring out where to look for the differences since the error message SQL Server returns is so vague. I know our sysadmins have had numerous issues with Active Directory replication across our domain, so my best guess is that there is some sort of odd group policy corruption going on, but I thought I'd ask here to see if I might be overlooking something more straightforward. Any ideas on how to further isolate the error would be greatly appreciated! For the record, here is a list of things I've already tried: Rebooting the SQL Server machine. Fixes the issue temporarily, then the error returns within a minute or two of startup. (This is why I suspect a rogue group policy that is slow to apply fouling things up.) Importing all database objects from the Access 97 mdb into a new, clean mdb file. Makes no difference. Moving the Access 97 mdb file to a local directory on the SQL Server machine instead of accessing it via a share on the Win XP Pro LAN machine. This works, but does not solve the problem because the mdb needs to be on the client machine for performance reasons and the ability to work "stand alone". Plus, the same shared folder access works fine on all other servers / clients on my network. Compared all the SQL Server, Windows Server, etc versions to a known working setup and everything appears to be the same.

    Read the article

  • GConf error and gnome does not load properly in RHEL 5.3

    - by Tim
    Hello, I am using Red Hat Enterprise Linux 5.3 . I created a user oracle on the system, using the following command useradd -g oinstall -G dba,oper -d /home/oracle oracle Now, when i try to login as the user oracle, GNOME does not load properly and i get popup box error message like the following GConf error:Failed to contact configuration server;some possible causes are that you need to enable TCP/IP for ORBit,or your have NFS locks due to a system crash.(Details-/:IOR file'/tmp/gcofd-cheetahman/tock/ior' not opened successfully,no gconfd located:Permission denied 2: IOR file /tmp/gconfd-cheetahman/lock/ior not opened succesfully no gconfd located: Permission denied) Any way to fix this ? Thank You

    Read the article

  • MySQL InnoDB Corruption after power outage, possible to recover?

    - by Tim Hackett
    Hey Guys, I recently started trying to get Redmine up and running after a power outage that seems to have corrupted our InnoDB database in MySQL. Redmine had an extensive set of documentation that I would like to get even if redmine isn't able to run. The service fails on startup. I have tried inserting innodb_force_recovery = 4 per the documentation from the url in the error log. (also tried 1 thru 6 as I have backed up all directories after the corruption) I have verified through "mysqld-nt --print-defaults" that it is starting with the recovery option in the params. The machine is running Windows Server 2003 SP2, Xeon E5335 with 2GB RAM, MySQL is not mirrored to another machine, nor is the machine a mirror. I do not have any backups because the previous person did not set them up. Here is the error log: InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 100308 14:50:01 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 100308 14:50:02 InnoDB: Error: page 7 log sequence number 0 935521175 InnoDB: is in the future! Current system log sequence number 0 933419020. InnoDB: Your database may be corrupt or you may have copied the InnoDB InnoDB: tablespace but not the InnoDB log files. See InnoDB: http://dev.mysql.com/doc/refman/5.0/en/forcing-recovery.html InnoDB: for more information. 100308 14:50:02 InnoDB: Error: page 2 log sequence number 0 935517607 InnoDB: is in the future! Current system log sequence number 0 933419020. InnoDB: Your database may be corrupt or you may have copied the InnoDB InnoDB: tablespace but not the InnoDB log files. See InnoDB: http://dev.mysql.com/doc/refman/5.0/en/forcing-recovery.html InnoDB: for more information. 100308 14:50:02 InnoDB: Error: page 11 log sequence number 0 935517607 InnoDB: is in the future! Current system log sequence number 0 933419020. InnoDB: Your database may be corrupt or you may have copied the InnoDB InnoDB: tablespace but not the InnoDB log files. See InnoDB: http://dev.mysql.com/doc/refman/5.0/en/forcing-recovery.html InnoDB: for more information. 100308 14:50:02 InnoDB: Error: page 5 log sequence number 0 972973045 InnoDB: is in the future! Current system log sequence number 0 933419020. InnoDB: Your database may be corrupt or you may have copied the InnoDB InnoDB: tablespace but not the InnoDB log files. See InnoDB: http://dev.mysql.com/doc/refman/5.0/en/forcing-recovery.html InnoDB: for more information. 100308 14:50:02 InnoDB: Error: page 6 log sequence number 0 972984051 InnoDB: is in the future! Current system log sequence number 0 933419020. InnoDB: Your database may be corrupt or you may have copied the InnoDB InnoDB: tablespace but not the InnoDB log files. See InnoDB: http://dev.mysql.com/doc/refman/5.0/en/forcing-recovery.html InnoDB: for more information. 100308 14:50:02 InnoDB: Error: page 1577 log sequence number 0 972737368 InnoDB: is in the future! Current system log sequence number 0 933419020. InnoDB: Your database may be corrupt or you may have copied the InnoDB InnoDB: tablespace but not the InnoDB log files. See InnoDB: http://dev.mysql.com/doc/refman/5.0/en/forcing-recovery.html InnoDB: for more information. InnoDB: Error: trying to access page number 4294965119 in space 0, InnoDB: space name .\ibdata1, InnoDB: which is outside the tablespace bounds. InnoDB: Byte offset 0, len 16384, i/o type 10. InnoDB: If you get this error at mysqld startup, please check that InnoDB: your my.cnf matches the ibdata files that you have in the InnoDB: MySQL server. 100308 14:50:02InnoDB: Assertion failure in thread 960 in file .\fil\fil0fil.c line 3959 InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.0/en/forcing-recovery.html InnoDB: about forcing recovery. 100308 14:50:02 [ERROR] mysqld-nt: Got signal 11. Aborting! 100308 14:50:02 [ERROR] Aborting 100308 14:50:02 [Note] mysqld-nt: Shutdown complete

    Read the article

  • MOSS 2007 SP2 - Error while provisioning SSP.

    - by Tim
    This is a brand new installation I am trying to provision the first SSP for MOSS and I keep getting the following error: (Provisioning failed: A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The semaphore timeout period has expired.)) The error also keeps appearing in the Application Event Log as event ID 7888. Google searches tell me its a connection between the Sharepoint server and the SQL server however, this is a production SQL Server which has several databases on it that do not experience any problems. These databases also include the Central Admin and Web Application databases for Sharepoint which are all working fine. Any guidance would be greatly appreciated. Thanks in advance.

    Read the article

  • Splwow64 with TS Easy Print

    - by Tim Brigham
    I have an application (Sage MIP Fund Accounting) which exports data to Excel. In this process it uses an internal print driver. Since we upgraded from 2008 to 2008 R2 this export process causes system hangs. This has been isolated down to the splwow64 executable hanging while the Excel document is building. If I kill the spwow64 executable things function properly (I just can't print it once completed). This only occurs while using printer redirection using the Remote Desktop Easy Print function - if I pull the printer redirection things work exactly as expected. I've spent the last couple hours looking at hotfixes or driver upgrades since this appears to be a problem specifically with how the Remote Desktop Easy Printer printer is functioning. Is anyone aware of a hotfix which would be applicable in this situation? I don't want to grab every hotfix for redirected printing and start throwing them out there.

    Read the article

  • How do you organise the cables in your racks?

    - by Tim
    I'm migrating my current half-size rack to a full-size rack and want to take the opportunity to reorganize and sort our spaghetti-hell of ethernet cables. What system do you use for organising your cables? Do you use any tracking software? Do you physically label the cables? What are you identifying when you label each end? Mac address? Port number? Asset number? What do you use to label them? I was looking at a hand held labeler, but the wrap around laser printer sheets might work. The Brady ID PAL seems good, but it's pricey. Ideas?

    Read the article

  • What backup utilities are available for Trixbox CE?

    - by Tim Post
    I'm running Trixbox CE (v2.6.2.3) and I need to make a full system backup of all configurations, recordings, databases, etc in a manner that can be easily restored on a brand new installation of the same version of Trixbox CE. I started to write something myself using rsync, however I feel like I'm probably missing some things and needlessly copying other things. What are my options?

    Read the article

  • Invoking 'Hotkey Mode' in IO Gear's GCS632U KVM Switch

    - by Tim Visher
    Awhile ago I changed the switch port key to left control on my IO Gear USB Switch and I'd like to change it back to Scroll Lock. When I did this, I have some memory of believing that I had found an error in the documentation for the switch regarding how to enter Hotkey Mode. Per the instructions in the manual(PDF), I'm supposed to be able to enter Hotkey Mode by Holding Scroll Lock for 2 seconds, adding Minus on the keypad for one second, and then release Minus first and within a second release Scroll lock. Ignoring the strangeness and fragility of this process, I'm looking for confirmation that this indeed works for anyone else. I can't remember why I thought it was wrong but I clearly remember that I did (I even had a blog post that I was going to write about but it got lost in the sands of time). As an aside, I'd be interested in seeing if there is any way to force a reset for the switch without entering Hotkey Mode as that would do exactly what I'm trying to do and I wouldn't have to mess with Hotkey Mode. Thanks in advance!

    Read the article

  • Modify registry for Internet Connection Sharing?

    - by Tim
    My OS is Windows XP. Quoted from How to Change the IP Range for the Internet Connection Sharing DHCP service Use Registry Editor to modify the data value of the IntranetInfo value in the following registry key: Hkey_Local_Machine\System\CurrentControlSet\Services\ICSharing\Settings\General The first number listed is the IP address of the internal IP address of the Connection Sharing host. The second number is the subnet IP address separated by a comma. Enter the first IP address of the new range followed by the subnet mask, separated by a comma. (For example, 169.254.0.1,255.255.0.0.). Modify the data value of the Start value in the following registry key: Hkey_Local_Machine\System\CurrentControlSet\Services\ICSharing\Addressing\Settings Change the value to the second address of the selected IP range. This address cannot be the same or a lower value than the IP address used for the IntranetInfo key. Modify the data value for the Stop value in the same registry key. Enter the last the IP address of the selected IP range. My registry table does not have Hkey_Local_Machine\System\CurrentControlSet\Services\ICSharing, and I don't know how to do with my registry table following the above three steps. Can someone guide me through it step by step?

    Read the article

  • TeamCity EC2 Integration via ISA Server

    - by Tim Long
    I have a TeamCity server which is actually installed on SBS 2003 Premium with ISA Server (firewall/proxy) installed. My ADSL connection has multiple IP addresses, which all resolve directly to my SBS external NIC. The NIC is therefore multi-homed and I have allocated one of the IP addresses specifically to TeamCity. In ISA, I've created an access rule to allow the traffic in. I can access my TeamCity server externally and view the web interface, that all works fine. I want to use the Amazon EC2 integration in TeamCity to launch build agents 'in the cloud'. The problem I am having is that when the agent starts, it sees the server and registers, then just sits there waiting. On the server side, the agent appears as 'disconnected'. Examining the settings, the agent's IP address appears to be that of the external NIC. What I think might be happening is that the traffic is undergoing Network Address Translation (NAT) so that TeamCity always thinks the agent is locally installed and therefore can't communicate with the actual remote agent. This seems to happen even though I have a permanent static IP address dedicated to TeamCity. So, the question is this. How can I make traffic to a specific IP address pass through the ISA server un-NATted?

    Read the article

  • Jabber Breaks in Empathy

    - by Tim Lytle
    Using empathy in Ubuntu 10.04 (64 bit), everything worked great after initial setup. But after disconnecting and reconnecting, any Jabber connection (GTalk and Facebook Chat) gives a 'network error'. Tried disabling accounts and only connecting to GTalk, same error. Tried removing all accounts, adding GTalk, same error. Upgraded to the dev version of Empathy, connected once, then after going 'offline' and reconnecting, same error. If it just didn't work, I'd wait for some kind of fix. But it did work, but only once per install. How does that happen? Anyone with this problem that solved it?

    Read the article

  • Enable SMB file sharing on OS X - "Incorrect Password"

    - by Tim Robinson
    I have a Mac running Snow Leopard connected to an Active Directory domain. I can share folders on the Mac and view files from Windows without problems. When I try to enable my Mac account for write access through System Preferences, I'm prompted for my account's password. Even though I'm entering the right one, I get an "Incorrect Password" response. The same process works fine for the local Mac administrator account; it's the Active Directory account I'm having problems with. I followed the advice on this page on apple.com without success: (I used the Mac to reset my domain password, and re-created my login keychain) If you want to use a user account that existed before you installed Mac OS X 10.3 (Panther), you may need to reset the password for the account using Accounts preferences. Can anyone suggest what might be wrong? Until I fix this I can't write to my Mac file share from Windows.

    Read the article

  • VLC playing mkv file without sound

    - by Tim
    When I play mkv file in VLC, it produces this error No suitable decoder module: VLC does not support the audio or video format "undf". Unfortunately there is no way for you to fix this. What does it mean and how to fix it? My OS is Windows 7. Thanks and regards!

    Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >