Search Results

Search found 10489 results on 420 pages for 'usb keyboard'.

Page 20/420 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

  • Lubuntu from USB

    - by WGCman
    I have An Acer Aspire 1362 Laptop with AMD Sompron 2800+ processor and only 256MB RAM, with Windows XP installed. I have downloaded Lubuntu-12.04-alternate-i386.iso and installed it to a 16GB USB stick. I do not want to install Lubuntu on my hard drive (yet!). I have got the USB stick to boot, and am working my way through the menu. At one stage, the installer wants to partition my hard drive, so I abort the installation. There doesn't seem to be an option on the menu to boot and run Lubuntu from the USB stick without putting stuff on the hard drive. How can I achieve this, please?

    Read the article

  • USB printer doesn't finish in 12.04

    - by 213441265152351
    I have an HP Deskjet 720C connected through a USB cable to an Ubuntu 12.04 laptop. When I plugged the printer for the first time into the fresh 12.04 laptop install, it auto-detected the printer correctly and choose the recommended drivers without a problem. The document print fine until they reach the end of the page, then suddenly stop just about the end leaving the page unfinished. I have checked that the margins are the correct ones. I have the latest version of cups installed. I have also tried changing the options of usb-unidir-default and usb-no-reattach-default via lpadmin, but the printing stops even earlier. Any ideas?

    Read the article

  • Why is using an external USB drive or USB printer causing my system to hang?

    - by thepd
    I am having some troubles using various external hard drives and my printer, all of which I connect using USB. The majority of the time, when I connect either of these devices, my system freezes up completely after about 10 minutes. They work just fine prior to that moment. I've also not noticed any problems using a USB mouse. I'm running Ubuntu 10.10 and have tried using a newer kernel (a 2.6.36 Maverick kernel from the kernel ppa, as opposed to the default 2.6.35 one) to no avail. I'm using a Dell Studio XPS 16 (M1647) which is a sort of newish laptop and so my guess is this is probably some kind of driver bug. Is there anyway to debug these sorts of issues? I've looked through some of my logs (/var/log/messages seemed the most useful) but haven't been able to find any kind of USB related logging nor anything interesting happening prior to the hang.

    Read the article

  • Trying to boot from USB on Asus q200e-bhi3t45 just brings me to grub menu

    - by Krash Kharma
    It's been a struggle every time I've tried to change my OS on this machine. I honestly don't even know how it works whenever it does. I've somehow managed to get Windows 7, Windows 8, Mint 14, Ubuntu 12.04, and 12.10 to work at random times but it's always after struggling with it and googling for random chance fixes and suddenly something clicks and it loads from usb, but 99% of the time, every time I try to boot from USB to install a distro (in this case, I'm trying to get ubuntu-12.04.2-desktop-amd64.iso to work) my pc just comes up with a grub menu ("Minimal bash-like blahblahblah - grub ") I don't know why it works when it works. Right now I've tried everything from with/without Fast Boot in BIOS, with/without CSM, with/without secure boot, to changing BOOTx64.EFI to bootx64.efi to downloading a new bootx64.efi to copying it to every folder on the usb.... It makes no sense to me. Sorry if this has been asked before but I can't find anything

    Read the article

  • How to install Ubuntu using a USB stick?

    - by J. N.
    I cannot install Ubuntu 11.10 from a USB stick. It doesn't boot to Ubuntu page for installation but remains on Windows 7. I've downloaded the 11.10 version iso file and burnt it to a USB stick. After I inserted it, the USB stick is a symbol of Ubuntu installation and I clicked wubi to try to install it. But it didn't boot to Ubuntu but stayed on Win 7 after restart. It occurred error and said "windowsBackend" object has no attribut "cd_path" when I chose "Help me to boot from CD". I thought it's the problem of my computer model (acer travelmate 8481), but it can't boot on an old computer using XP as well. How can I solve this problem and install Ubuntu to replace Windows?

    Read the article

  • usb drive filesystem?

    - by purbleguy
    So, school is approaching quickly, and one of the things on my supply list is a usb drive. Now I'm asking myself what filesystem to use. After some research, I found ext4 to be the most stable drive filesystem. But, I also found that Windows (The OS used by every computer in my school) can't read ext4 formatted drives without special drivers, and I'm sure the school wouldn't be too happy with me having to install the windows ext4 drivers on every computer I use with my usb. So, my question is, Should I use fat32, one of the ext filesystems (2, 3 or 4 would work) or NTFS, I have an ubuntu laptop, a Mac desktop, and of course the school computers I use are Windows, so which would be the best filesystem for my usb.

    Read the article

  • Usb boot device totally unable to be formatted

    - by fuqda
    I'm really upset by now, I've been trying 2hours straight to format a stupid usb drive (I'm new to ubuntu and I dont know if I will last long at this rate) Basically this was the lubuntu boot usb key I tried to remove files with sudo rm I tried to format disk with disk utility I tried to format disk with gparted (with unmounting beforehand) NOTHING WORKS. I cant delete a file. I cant move a file to the usb key. I cant do anything. This is really infuriating.. I dont know what to do ? here are some gparted errors while trying to format to fat32 after unmounting error fsyncing/closing/dev/sdb: input/output error input/output error during write on /dev/sdb when I try to remove by hand, it says "read-only file"

    Read the article

  • USB key will only be mounted by gparted [?]

    - by user2413
    Hi, When I insert by usb key nothing happens (i.e. the drive is not visible). I can mount the USB drive from gparted though (and then it's suddenly recognized). It's not particular to any USB key. This only happens on my laptop (on the desktop the same key will be mounted upon plugging it in without any problems). Finally, the key is formated as fat32 and dosfstools and mtools are installed (through gparted claims otherwise). what's the catch? EDIT Also, gparted offers me the option to mount the key on "/" : shouldn't that be "/media" (or has this changed ?)

    Read the article

  • unable to boot from live USB!

    - by ramblinman
    Linux noob here. I was messing around with my new dual-boot (win7 and the latest ubuntu, 12.04 I think?) Long story short, I deleted some partitions that I shouldn't have. When I boot up the machine, I get: error: no such partition. grub rescue _ I know that I could probably fix this by booting from the live USB. But I can't boot from the live USB either! On startup, I can get "boot from drive" options by pressing F12. (This is how I installed Ubuntu in the first place.) But when I select the USB drive, I get this error: error: no such device: [long string of letters and numbers]. grub rescue _ I've searched around for a fix but most threads addressing the first problem suggest booting from live drive. And I can't do that! Any help much appreciated.

    Read the article

  • DualBoot 32Win & 64Mac from Live USB +Persistance

    - by josephsmendoza
    So I have a 32 bit Live USB with persistance that I use to write code, cause that's just how I roll. I can boot it onto my school computers(32 bit Win) no problem, but obviously not my Mac (2007 iMac, 64 Bit). Currently I use VMWare Fusion 6 Pro and a Plop Linux image to use the usb at home, but I can only get 900mb of ram for my VM. I was hoping to make a Live USB that can boot 32 bit and 64 bit for mac, with a shared persistance file, this way I can use my computer's full 2GB. Also, I'm not allowed edit any part of this Mac. Do Not reply telling me it's impossible. Please only solutions. Thank you, and have a unicorntastic day!

    Read the article

  • Ubuntu 12.04 won't boot from USB

    - by user986871
    I downloaded Ubuntu 12.04, then using the tool Startup Disk Creator i made the live usb. I checked that it's bootable Device Boot Start End Blocks Id System /dev/sdb1 * 62 15635593 7817766 c W95 FAT32 (LBA) Now on my lap top it boots nicely, but on two other machines that don't have any installation of ubuntu(no Grub) it doesn't boot. I changed the booting order so that USB is before HDD. So i think i did everything i know, but no luck. How can i use this USB drive on other devices that don't have any previous ubuntu installation.

    Read the article

  • What to do about USB support?

    - by RhZ
    USB speeds are consistently slow in ubuntu, and have been for years. I just bought two new machines with usb 3.0, running 10.04, and yet nothing has changed, top speeds are only about 8.0 MB per second and they quickly drop to 2 or less. Its very frustrating. Are there any fixes for this at all? I find almost nothing online. The board is a gigabyte 970A-DS3 motherboard. Is there any driver I should install? I am using brand new usb sticks (kingston) and making sure to plug into the 3.0 (blue) slot.

    Read the article

  • Bose USB audio: crackling popping sound, eventually die

    - by Richard Barrett
    I've been trying to troubleshoot this issue for a while now. Any help would be much appreciated. I'm having trouble getting my Bose "Companion 5 multimedia speakers" working with my installation of Ubuntu 12.04 (link to Bose product here: http://www.bose.com/controller?url=/shop_online/digital_music_systems/computer_speakers/companion_5/index.jsp ). The issue seems to be low level (not just Ubuntu). What happens: When I boot into Ubuntu, I can get Rhythm box to play ok. However, if I try anything else (an .avi file, a webpage, or Clementine player with mp3 files) I get crackling, popping, or choppy sounds. If I move the mouse around, especially if it seems graphic intensive, the problem gets worse (more crackling noises). The more taxing it appears to be, the more likely it is that the sound will just die altogether until I reboot. For some reason the videos at www.bloomberg.com seem especially bad for it (my sound normally goes dead in under 45 seconds and won't work until reboot). Both my desktop running Ubuntu 12.04 and my laptop (running the same) have the same crackling problem. Troubleshooting so far: A friend of mine who knows linux well tried to solve it for me without any luck. He took pulseaudio out of the equation, but still had the problem just using AlSA. Among the many things he tried was adjusting the latency, but that didn't help either. I've also tried things like adjusting the USB device settings in the config file from -2 to -1 so that it will use my USB sound and I also commented out the lines that would stop that. These don't do anything. (That really seems like it's for someone who is getting no sound at all, so it's not surprising this won't work.) My friend's laptop running his Archlinux could play my Bose USB speakers without any problems. I also tried setting my daemon.conf file to use 6 channels (based on this http://lotphelp.com/lotp/configure-ubuntu-51-surround-sound ) but that didn't work either. I recently used a DVD to boot into Ubuntu Studio 12.04 (because it uses a live audio kernel) and this happened: I got perfect sound for a minute or two When I started moving windows around while sound was playing, the sound died again. Perhaps more interesting: There is a headphone out jack on the Bose system. When I use it, the audio is perfect for all applications (even the deadly bloomberg.com videos with .avi playing at the same time and moving around windows). Also, there is an audio-in jack on the Bose system. I can use a male-to-male mini jack to go from my soundcard's output to the Bose input and then all sound works perfectly. -However, it still requires the Bose to be plugged in to USB, otherwise I lose all sound. Any thoughts? Any suggestions for trouble shooting? (Or any suggestions for somewhere else to post to solve this?) Any logs or other files I can provide to help someone help me work this out? Your help is much appreciated! Rick BTW: I sometimes get people posting responses like "My Bose USB system works great with Ubuntu 12.04," without any more details. Is there anything I should ask such people to narrow down my problem? (It's kind of annoying to hear such a response because it doesn't help solve my problem.)

    Read the article

  • LWJGL - Continuous key press event without delay

    - by Zarkopafilis
    I am checking for key presses and then based on the keys pressed I am moving a square around the screen. I am setting booleans for the keys WASD. But , Whenever I try to keep the key down , it takes a while till it moves continuously (Just a half second stop after a single move.) Any way to get rid of that and make it be "smooth"? Code: up = false; down = false; left = false; right = false; reset = false; while(Keyboard.next()){ if (Keyboard.getEventKeyState()) { if(Keyboard.isKeyDown(Keyboard.KEY_SPACE)){ reset = false; } if(Keyboard.isKeyDown(Keyboard.KEY_W)){ up = true; } if(Keyboard.isKeyDown(Keyboard.KEY_S)){ down = true; } if(Keyboard.isKeyDown(Keyboard.KEY_A)){ left = true; } if(Keyboard.isKeyDown(Keyboard.KEY_D)){ right = true; } } }

    Read the article

  • Why does Ubuntu only detect one USB LAN adapters at a time?

    - by EGO
    I try to connect real switch with my computer for an exam preparation, for this purpose I need more than one LAN cards, and there is only one built in LAN card in my computer. So, to get more LAN cards, I bought 4 USB Ethernet adapters (as I have 4 usb ports in may laptop 2 usb 2.0 ports, 2 usb 3.0 ports). When I plug these adapters in my computer Ubuntu only detects one LAN card from 2.0 usb ports, and one LAN card from 3.0 ports. And sometimes detects only one USB LAN from all the usb ports. Actually the real problem is Ubuntu shows these USB LAN adapters in the "lsusb", but does not list them in "ifconfig". Kontron (Industrial Computer Source / ICS Advent) is my LAN USB ethernet. abc@ubuntu:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hu Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hu Bus 002 Device 012: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 001 Device 003: ID 138a:0018 Validity Sensors, Inc. Bus 001 Device 004: ID 064e:e258 Suyin Corp. Bus 003 Device 011: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 002 Device 013: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 003 Device 012: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 002 Device 005: ID 0a5c:21b4 Broadcom Corp. BCM2070 Bluetooth 2.1 + EDR -- etho is my built in LAN card, while eth1 is the only USB LAN card that ubuntu has detected. abc@ubuntu:~$ ifconfig eth0 Link encap:Ethernet HWaddr 2c:27:d7:a5:d2:39 inet6 addr: fe80::2e27:d7ff:fea5:d239/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:21056 errors:0 dropped:1 overruns:0 frame:0 TX packets:5669 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1407289 (1.4 MB) TX bytes:372566 (372.5 KB) Interrupt:49 Base address:0xa000 eth1 Link encap:Ethernet HWaddr 00:e0:4c:53:44:58 inet6 addr: fe80::2e0:4cff:fe53:4458/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:9230 errors:0 dropped:0 overruns:0 frame:0 TX packets:9230 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:557648 (557.6 KB) TX bytes:557648 (557.6 KB) wlan0 Link encap:Ethernet HWaddr cc:52:af:5e:78:05 inet addr:192.168.1.65 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::ce52:afff:fe5e:7805/64 Scope:LinkU UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:17389 errors:0 dropped:0 overruns:0 frame:0 TX packets:12231 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:22452248 (22.4 MB) TX bytes:1502750 (1.5 MB) If I unplug the USB LAN card which Ubuntu has detected, then Ubuntu will detect a USB LAN card from the remaining plugged adapters, and process go on untill I plug all the USB LAN adapters. Looking for some urgent help. Thanks

    Read the article

  • Ubuntu keyboard detection from bash script

    - by Ryan Brubaker
    Excuse my ignorance of linux OS/hardware issues...I'm just a programmer :) I have an application that calls out to some bash scripts to launch external applications, in this case Firefox. The application runs on a kiosk with touch screen capability. When launching Firefox, I also launch a virtual keyboard application that allows the user to have keyboard input. However, the kiosk also has both PS/2 and USB slots that would allow a user to plug-in a keyboard. If a keyboard were plugged in, it would be nice if I didn't have to launch the virtual keyboard and provide more screen space for the Firefox window. Is there a way for me to detect if a keyboard is plugged in from the bash script? Would it show up in /dev, and if so, would it show up at a consistent location? Would it make a difference if the user used a PS/2 or USB keyboard? Thanks!

    Read the article

  • Can not set Windows XP Keyboard configuration

    - by Bluebird75
    A friend of mine came to me with a french Windows XP where windows had decided that keyboard would now be english-US keyboard instead of french keyboard. After a few attempts, I came to the strange conclusion that it's impossible to change it. Whatever keyboard configuration I apply, the language dialog does not complain but sticks to the english-us keyboard. I tried : setting two keyboards, with FR as default setting two keyboards, with EN-US as default one keyboard as FR It's like it was impossible to apply a new keyboard configuration. Any idea what could be wrong ?

    Read the article

  • Using PC or Mac keyboard as Bluetooth keyboard for iPad?

    - by Kevin Hakanson
    I would like to use my computer keyboard (USB) as a Bluetooth keyboard for my iPad, while I am using it with my computer. I was hoping their was an "app for that" that I could run on either Mac or Windows. I imagine how it would work: It would have to emulate a Bluetooth keyboard, and be able to pair with the iPad. Then, when you give focus to this app, it transmits keystrokes from your built-in keyboard out over the Bluetooth connection. Seems simple, but I can't seem to find anything definitive on Google. Has anybody done this? I figure this is cheaper that buying a Apple iPad Keyboard Dock or a Apple Wireless Keyboard from the Apple Store. Also, it's one less item on my desk, which gets cluttered enough with one keyboard.

    Read the article

  • Which keymap to use for wired mac keyboard in Gentoo Linux?

    - by Absolute0
    I just purchase the new wired mac keyboard: Running on Gentoo Linux it works mostly fine. The only problem i am having is the function keys and swapping the alt and command keys to resemble a regular pc keyboard. When I tried switching to the "mac-us" keymap in /etc/conf.d/keymaps I got garbage when typing (not even qwerty). Is there any specific keymap that I can use to get what I want?

    Read the article

  • unity top menu keyboard shortcuts for desktop alone, no programs running

    - by user108754
    Alt+F1 accesses the launcher menu, with arrow keys to navigate the list (side menu). Alt+F10 accesses the top bar in an open application (or Alt+an underlined menu item letter), which allows access to the global ubuntu settings in the top right (battery, wifi/networking, audio, time/calendar, user, power). Alt+F10, when no application is open and you're just staring at the desktop, accesses those ubuntu settings immediately. But the top menu bar does list, in the top left, menu commands for the desktop per se (create new folder, go home, help, start server, etc). These can be accessed only by mouse hovering and click. No way to get to them only by keyboard (arrow keys just cycle through the settings, don't jump over to the left side of the top bar). Is there a keyboard shortcut way to access the desktop menu bar for manipulating icons on your desktop and other general things? Or is this a work in progress for unity? If you use the context menu key (or some equivalent you've set to generate that signal) along with other shortcuts for working on the desktop, you can cover most of the functionality of the top menu bar. However, I don't want to memorize those keys to become proficient. I just want a way to open and browse through those menu items (and they aren't ALL available through hotkeys anyway).

    Read the article

  • Ubuntu Froze Keyboard and mouse (laptop)

    - by fernando
    something similar to what happened to me was this post Updates kill Keyboard and mouse. unfortunately I'm stuck there. I also read on a couple other threads that I should go and use recovery mode, but when i select the option from GRUB it stops at a certain point, the screen that will allow me to fix packages won't appear. i decided to diagnose the computer, and test the RAM; so far everything seems to be going well. but this whole thing happened when I was doing an update around 230mb's... i still havent found a solution to the frozen Keyboard and mouse (trackpad). but if all else fails can i just reinstall Ubuntu? would that fix the issue? what else can I try? btw, I'm not not great with coding, so if there is anything that I need to type and put correct syntax or anything please guide me through it. I've had Ubuntu literally for 1 day, and this happens. any suggestions would be appreciated.

    Read the article

  • Option Button in Keyboard Layout > Input Sources is not pressable

    - by user98647
    I would like to set the Caps-lock key as a Compose key, which you do, as far as I remember, by pressing the Options Button in Keyboard Layout Input Sources and then enabling the appropriate option there. That Button is not pressable though since I switched to 12.10. It did work in previous releases of Ubuntu. gnome-control-center puts out these errors, when I click on Keyboard Layout: (gnome-control-center:3645): common-cc-panel-WARNING **: Could not find current language '?\u0003C!\u007f' in the treeview (gnome-control-center:3645): common-cc-panel-WARNING **: locale '"en_US.UTF-8"' isn't valid I'm not sure if the errors are related though, maybe they are related to the "interface switching to chinese bug" which seems surprisingly widespread: Language changed to Chinese, how do I change it back? Language Support has an unwanted Chinese language option Nautilus Folders Turned Chinese Desktop 12.04 gnome/cairo suddenly in Chinese Unwanted Chinese language got set in system settings I cannot set my system back to English from Chinese Language Gnome-classic language turned into Chinese, how do I change it back to English? Strange display language in gnome shell I'm not sure they are related to this bug, but I just wanted to mention it, maybe it helps!

    Read the article

  • Random touchpad and keyboard freezes on new 10.10 installation

    - by ancaleth
    My touchpad and keyboard freeze up on my newly installed Ubuntu 10.10. I was using Ubuntu 10.4 via wubi before on this Laptop where this problem never occurred. (I did not migrate wubi or upgrade to 10.10, it's a fresh start. 64-bit on Dell Studio, plenty of RAM, plenty of free space on partition etc.) I can't say there is a pattern yet, once it happened during the download of packages with the Update Manager, once it was just using Firefox, no other program running. I was forced to shut down manually. In between these crashes the laptop was booted once, updates were installed etc., firefox was used and there weren't any problems. Both crashes should be in the attached kern.log and I noticed there were some error problems before the last crash (at the end, obviously). It seems the wireless was experiencing problems. This wasn't noticed on the user end, since the touchpad + keyboard were already frozen. kern.log: http://paste.ubuntu.com/552617/ How can the freezes be fixed?

    Read the article

  • USB 3.0 ports backwards compatibility problems with 2.0 devices?

    - by AaronLS
    I see some info on the net that suggest that I should be able to get my USB 2.0 devices to work in 3.0 ports. I only have two 2.0 ports on my new computer, and six 3.0 ports. I have installed drives. There's two different drivers, I guess some of the ports are supported by the intel board and some supported by some other chipset on the motherboard. I however have yet to get any of the 3.0 ports to work, and my brother had had the same issue with his devices not working in 3.0 ports on his computer. So I am beginning to wonder if the backwards compatibility isn't reliable for some reason. Maybe manufacturers opting not to implement 2.0 support on the 3.0 ports. I understand that physically the wiring is there, but that is only half the story. Beyond my brother's and my own computers (different motherboards/everything), I have yet to see a 2.0 device work in a 3.0 port. Is there any reason for this apparent device incompatibility? I.e. looking for responses that would indicate what areas to explore for issues or if there is any known cases of manufacturers deviating from spec in hardware or drivers. I am aware it's "supposed" to work :) Update: Does this have any relation to "USB Legacy Support" options in the BIOS? There several options combinations of options with "USB Legacy Support" and "USB 3.0 Legacy Support" and the description for these is a bit confusing, sounds like a bad translation.

    Read the article

  • USB ports causing Wireless and Mobile Phone tethering drop out

    - by chrolli
    I have a problem with my USB ports and I can't seem to pinpoint the problem. I'm hoping that I can get some idea as to how to troubleshoot my problem. Problem description: I recently bought a USB Wireless Adapter in order to connect my Desktop PC to the WLAN. The dongle keeps dropping off connection regularly on average once a minute. And the connection is slow. What I've tried: I installed a network scanner to determine signal strength. The PC/adapter combo is getting about 70% signal strength. I have a laptop that has an internal Wireless adapter. I moved the laptop near the location of the PC. The signal strength was above 90%. I installed the USB adapter on the laptop. I placed the laptop near the location of the PC. The signal strength was above 80%. And there is no drop out issue. I've isolated the problem to be on the PC. I used internet tethering on my mobile phone in order to test the USB ports. I get the same problem, themobile phone keeps dropping in and out. I plugged the adapter and phone on all USB ports, and it is still dropping out on all ports. I've isolated the problem to be the Motherboard, USB hub. I updated the BIOS, and USB driver. Still dropping out. I noticed that when I used the mobile phone tethering method, the phone (iphone 5) is guarenteed to drop out and does not appear to charge if I jiggle the the 8-pin connector on the base of the phone. If I push the pin tightly on the phone, the phone starts charging, as soon as I let go, it stops and drops out from the PC. This is strange because this doesn't happen when it is plugged to the powerboard. Which means that the 8 pin connector is fine. I'm not sure what the problem is. I assume that it is to do with the USB ports not supplying enough power which in turn causes the devices to intermittently drop out. The reason I say this is because the USB cable works fine when plugged into a powerboard with enough power supplied to the phone. Only when it is plugged into the USB port on the PC, does it drop out. My motherboard is Asus P8z68-v le. My Wireless adapter is the D-link DWA131. I can't seem to find any settings in the BIOS to increase the south bridge voltage so as to supply more power to the USB ports. Although this problem only occurs when I'm trying to hook up to a device supplying internet connection. My USB HDD, Flash drives, and Mouse and Key are working fine! Any suggestions please?

    Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >