Search Results

Search found 14837 results on 594 pages for 'duplicate ip'.

Page 200/594 | < Previous Page | 196 197 198 199 200 201 202 203 204 205 206 207  | Next Page >

  • Error on restarting networking :SIOCSIFFLAGS

    - by Paddington
    I have a sever with 2 network cards, an internal IP on one card (eth0) and external IPs (aliased) on the other card (eth1). I lost connection the public network and I tried to restart networking with /etc/init.d/networking restart and got the error "SIOCSIFFLAGS: cannot assing requested IP and Failed to bring up eth1". I even added the IPs in the interfaces file but still got an error on restarting. I could not ping my default gateway. A work around was to add ifconfig eth 0 x.x.x.x route -add default gw x.x.x.z I could then connect to the public network. What could be the issue here?

    Read the article

  • What do I change in my domain name's DNS if I get a new Internet provider?

    - by johnny
    My company is about to get a new physical connection to the Internet, replacing the old provider. They, of course, are giving us the allotted IPs, Gateway, and DNS servers. My domain name is registered with a provider like Bluehost, GoDaddy, etc. When this new connection goes in, what do I change in the domain name providers DNS? I know to change what Host point to. That is my new IP address. But what about the name servers? I am confused because the company gave me IP addresses for the name servers, but at the provider is has a DNS server name like ns1.somedomain.com. Also, How do I update the Internet's DNS servers? Thanks.

    Read the article

  • Cannot connect to Onda GSM phone using network-manager

    - by marcobra
    On Oneiric unstable fully updated/upgraded using network-manager broadband connection with: ID 19d2:1015 ONDA Communication S.p.A. I want some hints to make a Onda GSM usbkey 19d2:1015 work? route show me Destination Gateway Genmask Flags Metric Ref Use Iface default * 0.0.0.0 U 0 0 0 usb0 link-local * 255.255.0.0 U 1000 0 0 usb0 It connects and the usb0 device get ip-address from the provider but I cannot get webpages (also typing a known ip in firefox) It seem to be something about routing default gw, there is no active firewall on this pc btw, all works using sakis3g or wvdial or gnome-ppp

    Read the article

  • Canon Mx772 printer recognized, drivers loaded...but all print jobs "Held"

    - by user212169
    BRAND NEW to Ubuntu but loving it so far. I have a Canon MX772 wireless printing running on my network and am able to print fine from a PC and Mac. Using the printers IP, Ubuntu was able to find it and I accepted all of the "recommended" items (it found a Canon MX770 driver). Everything seems to load fine...but the test page does not print, nor does any print commands make it to the printer. If I open the print dialogue jobs are shown as "held" and when I look at the jobs attributes, I see "Job printer state message=cannot specify model number" and then a few lines down "job state reasons=aborted by system". If I try to "resume" it immediately goes back to "held". I can successfully ping the IP of the printer. Would be very appreciative of other ideas...printing is the last check in the box before I am all set up. Thanks!

    Read the article

  • Does redirect popup window affect SEO?

    - by Joseph
    We have multiple websites, each site servers number of countries, and we used to have Geo-Ip Auto redirect system (no one likes auto-redirect), so we implemented another redirect system also uses Geo-IP database, but showing a pop-up window (HTML layer pop-up, so it can't be rejected), this window asks the visitor if he would like to continue with this page or go to the correct website of his country. We also added a test line before showing the pop-up, so if the visitor is Googlebot, the popup will not show up :). I was wondering if this effects our websites SEO?

    Read the article

  • Installing Yaws server on Ubuntu 12.04 (Using a cloud service)

    - by Lee Torres
    I'm trying to get a Yaws web server working on a cloud service (Amazon AWS). I've compilled and installed a local copy on the server. My problem is that I can't get Yaws to run while running on either port 8000 or port 80. I have the following configuration in yaws.conf: port = 8000 listen = 0.0.0.0 docroot = /home/ubuntu/yaws/www/test dir_listings = true This produces the following successful launch/result: Eshell V5.8.5 (abort with ^G) =INFO REPORT==== 16-Sep-2012::17:21:06 === Yaws: Using config file /home/ubuntu/yaws.conf =INFO REPORT==== 16-Sep-2012::17:21:06 === Ctlfile : /home/ubuntu/.yaws/yaws/default/CTL =INFO REPORT==== 16-Sep-2012::17:21:06 === Yaws: Listening to 0.0.0.0:8000 for <3> virtual servers: - http://domU-12-31-39-0B-1A-F6:8000 under /home/ubuntu/yaws/www/trial - =INFO REPORT==== 16-Sep-2012::17:21:06 === Yaws: Listening to 0.0.0.0:4443 for <1> virtual servers: - When I try to access the the url (http://ec2-72-44-47-235.compute-1.amazonaws.com), it never connects. I've tried using paping to check if port 80 or 8000 is open(http://code.google.com/p/paping/) and I get a "Host can not be resolved" error, so obviously something isn't working. I've also tried setting the yaws.conf so its at Port 80, appearing like this: port = 8000 listen = 0.0.0.0 docroot = /home/ubuntu/yaws/www/test dir_listings = true and I get the following error: =ERROR REPORT==== 16-Sep-2012::17:24:47 === Yaws: Failed to listen 0.0.0.0:80 : {error,eacces} =ERROR REPORT==== 16-Sep-2012::17:24:47 === Can't listen to socket: {error,eacces} =ERROR REPORT==== 16-Sep-2012::17:24:47 === Top proc died, terminate gserv =ERROR REPORT==== 16-Sep-2012::17:24:47 === Top proc died, terminate gserv =INFO REPORT==== 16-Sep-2012::17:24:47 === application: yaws exited: {shutdown,{yaws_app,start,[normal,[]]}} type: permanent {"Kernel pid terminated",application_controller," {application_start_failure,yaws,>>>>>>{shutdown,>{yaws_app,start,[normal,[]]}}}"} I've also opened up the port 80 using iptables. Running sudo iptables -L gives this output: Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT tcp -- ip-192-168-2-0.ec2.internal ip-192-168-2-16.ec2.internal tcp dpt:http ACCEPT tcp -- 0.0.0.0 anywhere tcp dpt:http ACCEPT all -- anywhere anywhere ctstate RELATED,ESTABLISHED ACCEPT tcp -- anywhere anywhere tcp dpt:http ACCEPT tcp -- anywhere anywhere tcp dpt:http Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination In addition, I've gone to the security group panel in the Amazon AWS configuration area, and add ports 80, 8000, and 8080 to ip source 0.0.0.0 Please note: if you try to access the URL of the virtual server now, it likely won't connect because I'm not running currently running the yaws daemon. I've tested it when I've run yaws either through yaws or yaws -i Thanks for the patience

    Read the article

  • Buying a parked domain if the contact email bounces

    - by Mala
    I'm trying to buy a domain which is parked, but the contact email address listed on the page itself bounces. I looked up the WHOIS data and there are no email addresses or phone numbers listed. There are way too many hits on facebook / linkedin to try just searching for the name. What recourses do I have to try to get into contact with the owner? UPDATE: Hosted on the same IP are 206 identical "parked" pages, whose sole difference is the domain and the email address (always "info@[domain].it"): http://www.bing.com/search?q=ip%3A151.1.48.220 Whois info shows contact information for none (that I sampled) but all with different names o_O

    Read the article

  • MythTV lost recordings - "No recordings available" and no recording rules either

    - by nimasmi
    I have a c.6 year old mythtv database. I recently upgraded from Ubuntu 10.04 to 12.04. This brought a MythTV upgrade from 0.24 to 0.25, which went well. Today, all my recordings have disappeared. They still exist in the /var/lib/mythtv/recordings folder, and the 'M' key in the Watch Recordings page says that there are 201 recordings available somewhere, but they will not display. See screenshot: (implicit thanks to whomever upvoted this, giving me sufficient reputation to upload images) Changing the filter does not remedy the fact that there is nothing shown in the lists. My Upcoming Recordings screen says that there are no rules set, but my list of previously recorded shows is still there, and has an entry from as recently as 3am today. mythbackend --printsched gives the following: user@box:~$ mythbackend --printsched 2012-09-22 12:59:20.537008 C mythbackend version: fixes/0.25 [v0.25.2-15-g46cab93] www.mythtv.org 2012-09-22 12:59:20.537043 C Qt version: compile: 4.8.1, runtime: 4.8.1 2012-09-22 12:59:20.537048 N Enabled verbose msgs: general 2012-09-22 12:59:20.537076 N Setting Log Level to LOG_INFO 2012-09-22 12:59:20.537142 I Added logging to the console 2012-09-22 12:59:20.537152 I Added database logging to table logging 2012-09-22 12:59:20.537279 N Setting up SIGHUP handler 2012-09-22 12:59:20.537373 N Using runtime prefix = /usr 2012-09-22 12:59:20.537394 N Using configuration directory = /home/user/.mythtv 2012-09-22 12:59:20.537999 I Assumed character encoding: en_GB.UTF-8 2012-09-22 12:59:20.538599 N Empty LocalHostName. 2012-09-22 12:59:20.538610 I Using localhost value of box 2012-09-22 12:59:20.538792 I Testing network connectivity to '192.168.1.2' 2012-09-22 12:59:20.539420 I Starting process manager 2012-09-22 12:59:20.541412 I Starting IO manager (read) 2012-09-22 12:59:20.541715 I Starting IO manager (write) 2012-09-22 12:59:20.541836 I Starting process signal handler 2012-09-22 12:59:20.684497 N Setting QT default locale to EN_GB 2012-09-22 12:59:20.684694 I Current locale EN_GB 2012-09-22 12:59:20.684813 N Reading locale defaults from /usr/share/mythtv//locales/en_gb.xml 2012-09-22 12:59:20.697623 I New static DB connectionDataDirectCon 2012-09-22 12:59:20.704769 I MythCoreContext: Connecting to backend server: 192.168.1.2:6543 (try 1 of 1) Calculating Schedule from database. Inputs, Card IDs, and Conflict info may be invalid if you have multiple tuners. 2012-09-22 12:59:27.710538 E MythSocket(21dfcd0:14): readStringList: Error, timed out after 7000 ms. 2012-09-22 12:59:27.710592 C Protocol version check failure. The response to MYTH_PROTO_VERSION was empty. This happens when the backend is too busy to respond, or has deadlocked in due to bugs or hardware failure. Things I have tried so far: restart the backend restart the frontend run mythtv-setup and check database passwords and IP addresses change the frontend setting for backend IP from localhost to 192.168.1.2 (the backend/frontend's IP) run optimize_mythdb.pl Other suggestions appreciated.

    Read the article

  • How can I prevent HTTPS on another domain from wrongly showing on my HTTP-only domain?

    - by Earlz
    So, I have a blog at domain.com. This blog is HTTP-only because I would gain almost nothing from adding SSL support. I have a web service now that I want to enable SSL support on that runs on the same server and IP address as my blog. I got it all working pretty easily, but not if I go to https://domain.com I will see a huge warning about an SSL certificate error and then if I click "ok" through the warning, I'll see the web service with SSL support, not my blog. My biggest fear with this scheme is Google indexing an HTTPS version of it and penalizing my blog because the content between the two doesn't match. How can I somehow for my blog's domain to either not serve anything on HTTPS, or to redirect back to my HTTP blog, or to serve my blog, but with an invalid SSL certificate? What can I do, preferably without buying another dedicated IP for my website?

    Read the article

  • How do I add a network printer in Ubuntu 12.04?

    - by Ricky Robinson
    I know the name and the IP address of a network printer, but I can't seem to be able to search by IP address or name. Ubuntu developers love to move things around to make it difficult for users, so now with Ubuntu 12.04 I can only go on Application -> System Tools -> System Settings -> Printers, click on Network and a list of printers appears. Too bad the one I want to add isn't there. How do I do it? Here it suggests System -> Administration -> Printing, which simply doesn't exist.

    Read the article

  • Ubuntu 10.10 Network Issues (wireless as well as wired)

    - by user9054
    down vote favorite Hi Friends, I have got this issue with Ubuntu 10.10 . I have been with ubuntu 8.04 and then decided to try out ubuntu 10.10 . I booted with a LiveCD and was able to configure the wireless network painlessly using the livecd . so happily i installed ubuntu 10.10 . As soon as ubuntu came up it detected the wireless network and i was able to assign a static IP to eth1 (i dont use DHCP option on my ADSL router) and enter a wap key and use pppoeconf to configure the dialer . The net was on and i was able to surf the net . all hunky dory so far . However on the next boot the fun started . It did not detect the wireless network . I could not see the network manager icon in the systray . I used ifconfig and saw that the entry for eth1 was missing .I used ifup eth1 and it said that eth1 was already up . Then i installed wifi-radar . Wifi-Radar detected the wireless network . I configured wifi-radar for the detected wireless network , set the wap driver as wext and used the manual IP settings . However on clicking connect wifi-radar started looking for a DHCP IP , needless to say it failed . For the love of god i cannot understand why wifi-radar is using DHCP when i have specified manual settings . Next i decided to use the wired network to surf the net looking for a solution . So i plugged in the network cable from my modem , it detected the plugged in connection , i configured eth0 , used pppoeconf and connected to the net . Then i foolishly decided to reboot my PC . And wonders of wonders , the same problem appeared . I cannot see eth0 in my ifconfig anymore . i used pon to start the dsl-provider connection and it said something about network error or something . Now my ifconfig shows only lo , both eth0 and eth1 have disappeared .Can anybody help me on this ? Is it a problem with ipv6 , if so how do you disable ipv6 on ubuntu 10.10 ? OR is this is a known issue with ubuntu 10.10 ? .PS : 1) i tried linux mint 10 and had the same issue . on rebooting wireless network was not getting detected . 2) i have made myself the administrator so that there is no issue of rights or anything. Any help is appreciated.

    Read the article

  • What do I do if a user uploads child pornography?

    - by Tom Marthenal
    If my website allows uploading images (which are not moderated), what action do I take if a user uploads child pornography? I already make it easy to report images, and have never had this problem before, but am wondering what the appropriate response is. My initial thought is to: Immediately delete (not just make inaccessible) the image File a report with the National Center for Missing and Exploited Children with all information I have on the user (IP, URL, user-agent, etc.), identifying myself as the website operator and providing contact information Check any other images uploaded by that IP user and prevent them from uploading in the future (this is impossible, but I can at least block their account). This seems like a good way to be responsible in reporting, but does this satisfy all of my legal and moral responsibilities? Would it be better not to delete the image and to just make it inaccessible, so that it can be sent to the National Center for Missing & Exploted Children, the police, FBI, etc?

    Read the article

  • How to set up port forwarding and firewall settings for torrents using Transmsission on Mac OSX 10.5

    - by Liz
    I have picked up bits of advice here and there on the internet and got someway through this tortuous exercise (after it took 18 hours to download the first torrent I tried yesterday - magnet-link for a film). Where I have got stuck is with configuring the firewall on the Netgear Router but I am not sure if I have caused the problem myself by something else I have done configuring the Mac System Preferences for Security or Networking. I have been following the sections of these instructions that seem to apply, although they are written for a different OSX version (don't know which one, but the screen shots do not match what I see) and I am not wanting to set up my Mac as a server and attending to the parts that apply to port forwarding for Netgear rather than LinkSys: http://homepage.mac.com/car1son/static_port_fwd_intro.html I have been trying to follow these instructions: Instructions for DG834, DG834G, DG824M, FR114W, FM114P, FR114P, FR328S, FVL328, FVS328, FVS338, FVX538, FWAG114, FWG114P, or FVS318v3 These routers do port forwarding by assigning port numbers to a "service" associated with the application you want to run. "Rules" are set for particular services. Rules block or allow access, based on various conditions such as the time of day and the name of the service. To Create a New Inbound or Outbound Rule 1. Submit the router's address in an Internet browser. (The default is 192.168.0.1). 2. Enter the router's username and password. 3. From the main menu, click Security > Rules. 4. Click Add for inbound or outbound traffic, as appropriate to the application you are planning to run. 5. Select the Service. The services the router knows about are listed in the drop down. If the service you want is not listed, add it as described in the next section. 6. Select the Action, for example ALLOW always. 7. For Send to LAN Server, enter the IP address of the local server. Note that this is also the IP address the computers on your LAN will access. 8. For WAN User choose Any, or limit access to particular IP addresses. 9. For Log selection it is reasonable to turn logs on, especially at the beginning when you are unsure of the result of the changes you are making. Later, you may want to set logs to "Never" for performance reasons. 10. Click Apply. As noted in user manual for some models: * Consider using the Dynamic DNS feature on the Advanced menu, so that external users can find your network when the DHCP lease is renewed by your ISP. * If your own LAN server uses DHCP, and your IPs change on rebooting, consider using the Reserved IP Address feature in the LAN IP menu. To Add a Service for These Routers 1. Click Security > Services > Add Custom Service. 2. Enter any name you choose for the service. 3. Select whether the service is to use TCP or UDP. If you are unsure, select both. 4. Enter the lowest port number used by the service. 5. Enter the highest port number used. If the service uses only one port number, enter the same number. 6. Click Apply. There is no "Security - Rules" submenu in the Netgear page, so I have been trying to access "Security - Firewall Rules". I can access everthing else in the Netgear settings as Admin but I cannot get the "Firewall Rules" section to open up. (I am not 100% sure I will know exactly what to do if and when I do get it opened up!) I haven't managed to find though searching the internet any instructions that would seem to apply specifically to what I am trying to achieve, so would be very grateful if someone could either point me in the right direction or give me some advice directly. Best wishes, Liz

    Read the article

  • snmptt not translating traps, even with translate_log_trap_oid=1

    - by mbrownnyc
    I am having some trouble configuring snmptt to properly translate snmp traps. The following is a problem: /etc/snmp/snmptt.conf reflects: EVENT fgFmTrapIfChange .1.3.6.1.4.1.12356.101.6.0.1004 "Status Events" Critical FORMAT $* EXEC /usr/local/nagios/libexec/eventhandlers/submit_check_result $r "snmp_traps" 2 "$O: $+*" "$*" SDESC Trap is sent to the managing FortiManager if an interface IP is changed Variables: 1: fnSysSerial 2: ifName 3: fgManIfIp 4: fgManIfMask EDESC when a trap is received, /var/log/messages reflects: Sep 6 12:07:32 SNMPMANAGERHOST snmptrapd[15385]: 2012-09-06 12:07:32 <UNKNOWN> [UDP: [192.168.100.2]:162->[192.168.100.31]]: #012.1.3.6.1.2.1.1.3.0 = Timeticks: (707253943) 81 days, 20:35:39.43 #011.1.3.6.1.6.3.1.1.4.1.0 = OID: .1.3.6.1.4.1.12356.101.6.0.1004 #011.1.3.6.1.4.1.12356.100.1.1.1.0 = STRING: FGTNNNNNNNNN #011.1.3.6.1.2.1.31.1.1.1.1.10 = STRING: internal4 #011.1.3.6.1.4.1.12356.101.6.2.1.0 = IpAddress: 192.168.65.100 #011.1.3.6.1.4.1.12356.101.6.2.2.0 = IpAddress: 255.255.255.0 Sep 6 12:07:37 SNMPMANAGERHOST icinga: EXTERNAL COMMAND: PROCESS_SERVICE_CHECK_RESULT; 192.168.100.2; snmp_traps; 2; enterprises.12356.101.6.0.1004: enterprises.12356.100.1.1.1.0:FGTNNNNNNNNN ifName.10:internal4 enterprises.12356.101.6.2.1.0:192.168.65.100 enterprises.12356.101.6.2.2.0:255.255.255.0 Since the icinga entry reflects the EXEC, it's obvious there is no translations occurring by snmptt. I have verified that translate_log_trap_oid and net_snmp_perl_enable is enabled in snmptt.ini When using --debug=1 to start snmptt, I see the following in the --debugfile: ********** Net-SNMP version 5.05 Perl module enabled ********** The main NET-SNMP version is reported as NET-SNMP version: 5.5. What else can be done to verify that snmptt is configured properly to translate traps? I have run snmptt-net-snmp-test to verify whatever net-snmp-perl version I have installed properly supports translations. The output indicates it does. /root/snmptt_1.3/snmptt-net-snmp-test --best_guess=2 SNMPTT Net-SNMP Test v1.0 (c) 2003 Alex Burger http://snmptt.sourceforge.net MIBS:RFC1213-MIB best_guess: 2 Testing translateObj ******************** Testing: .1.3.6.1.2.1.1.1, long_names=disabled, include_module=disabled Test passed. Result: sysDescr Testing: .1.3.6.1.2.1.1.1, long_names=disabled, include_module=enabled Test passed. Result: RFC1213-MIB::sysDescr Testing: .1.3.6.1.2.1.1.1, long_names=enabled, include_module=disabled Test passed. Result: .iso.org.dod.internet.mgmt.mib-2.system.sysDescr Testing: .1.3.6.1.2.1.1.1, long_names=enabled, include_module=enabled Test passed. Result: RFC1213-MIB::.iso.org.dod.internet.mgmt.mib-2.system.sysDescr Testing: sysDescr, long_names=disabled, include_module=disabled Test passed. Result: .1.3.6.1.2.1.1.1 Testing: RFC1213-MIB::sysDescr, long_names=disabled, include_module=disabled Test passed. Result: .1.3.6.1.2.1.1.1 Testing: system.sysDescr, long_names=disabled, include_module=disabled Test passed. Result: .1.3.6.1.2.1.1.1 Testing: RFC1213-MIB::system.sysDescr, long_names=disabled, include_module=disabled Test passed. Result: .1.3.6.1.2.1.1.1 Testing: .iso.org.dod.internet.mgmt.mib-2.system.sysDescr, long_names=disabled, include_module=disabled Test passed. Result: .1.3.6.1.2.1.1.1 Testing getType *************** Testing: .1.3.6.1.2.1.4.1 Test passed. Result: INTEGER Testing: ipForwarding Test passed. Result: INTEGER Testing Description ******************* Test passed. Result: ------------------------------------------------- The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams. IP hosts do not (except those source-routed via the host). Note that for some managed nodes, this object may take on only a subset of the values possible. Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to change this object to an inappropriate value. ------------------------------------------------- I have manually gone through the MIB with the definition that's not resolving, and verified that it is properly linking back to the proper resolved definition. It is: FORTINET-FORTIGATE-MIB.txt contains: fgFmTrapIfChange NOTIFICATION-TYPE OBJECTS { fnSysSerial, ifName, fgManIfIp, fgManIfMask } STATUS current DESCRIPTION "Trap is sent to the managing FortiManager if an interface IP is changed" ::= { fgFmTrapPrefix 1004 } fgFmTrapPrefix OBJECT IDENTIFIER ::= { fgMgmt 0 } fgMgmt OBJECT IDENTIFIER ::= { fnFortiGateMib 6 } fnFortiGateMib ::= { fortinet 101 } IMPORTS FnBoolState, FnIndex, fnAdminEntry, fnSysSerial, fortinet FROM FORTINET-CORE-MIB fortinet MODULE-IDENTITY ::= { enterprises 12356 } LOOKS GOOD!!!!! 1.3.6.1.4.1.12356.101.6.0.1004 I've exhausted all the documentation and even posted fruitlessly in the snmptt-users mailing list. I can not prove it is the MIB. Why would snmptt fail to translate traps? Thanks, Matt

    Read the article

  • CUPS: HP printer DNS url

    - by wintersolutions
    The URL for my printer generated by hp-makeuri looks like this: hp:/net/Officejet_6500_E710n-z?ip=192.168.178.30 But the printer is on a dhcp enabled wifi network and so its IP-address does and could change. On the other hand my wifi router seems smart enough to have some sort of DNS: $ ping hp-6500a PING hp-6500a.fritz.box (192.168.178.30) 56(84) bytes of data. 64 bytes from hp-6500a.fritz.box (192.168.178.30): icmp_req=1 ttl=255 time=11.3 ms I tried to use the hostname in the CUPS URL/DeviceUID but it failed, any suggestions if this is possible and the correct format?

    Read the article

  • Networking works on Live CD but not after installation.

    - by user9054
    Hi Friends, I have got this issue with Ubuntu 10.10. I have been with ubuntu 8.04 and then decided to try out ubuntu 10.10 . I booted with a LiveCD and was able to configure the wireless network painlessly using the livecd, so happily I installed ubuntu 10.10. As soon as ubuntu came up it detected the wireless network and i was able to assign a static IP to eth1 (i dont use DHCP option on my ADSL router) and enter a wap key and use pppoeconf to configure the dialer. The net was on and i was able to surf the net. All hunky dory so far. However on the next boot the fun started . It did not detect the wireless network. I could not see the network manager icon in the systray. I used ifconfig and saw that the entry for eth1 was missing. I used ifup eth1 and it said that eth1 was already up. Then i installed wifi-radar. Wifi-Radar detected the wireless network. I configured wifi-radar for the detected wireless network , set the wap driver as wext and used the manual IP settings. However on clicking connect wifi-radar started looking for a DHCP IP. I cannot understand why wifi-radar is using DHCP when I have specified manual settings. Then I decided to use the wired network to surf the net looking for a solution. So I plugged in the network cable from my modem , configured eth0 , used pppoeconf and connected the net. Then I foolishly decided to reboot my PC. And wonders of wonders , the same problem appeared. I cannot see eth0 in my ifconfig anymore. I used pon and it said something about network error or something. Now my ifconfig shows only lo .Can anybody help me on this. PS : 1) I tried linux mint 10 and had the same issue . on rebooting wireless network was not getting detected. 2) I have made myself the administrator so that there is no issue of rights or anything.

    Read the article

  • A record DNS, nameserver help

    - by Josip Gòdly Zirdum
    I just installed kloxo on my vps and I want to link my domain to that server...which it sort of already is...I made it connect to it via an A record. That works, like the IP is pointing to my server but how do I make a website using it. I tried adding the domain but this doesn't work ...I feel i'm not explaining this well um, on my server it asked me to create DNS template so I did I created the nameservers ns1.mydomain.com, ns2.mydomain.com Then I added the domain to the panel mydomain.com I go to the folder it creates to it, but no matter the file there it wont work...any ideas? Is there a way to possibly just not even add a domain to kloxo and just kind of treat the ip of the server as the domain? Since the A record points there anyway? I don't intend to host another website on the server anyway...

    Read the article

  • Connecting a LAN to an OpenVPN server via a windows 7 client gateway

    - by user705142
    I've got OpenVPN set up between my windows 7 client and linux server. The goal is that I'll get secure access to a webapp running on the server from any computer on the client LAN. I'm using ccd to assign static ip addresses to each client connection, with key authentication. It's working on my client machine (10.83.41.9), and when you go to the gateway IP address (10.83.41.1), it loads up the webapp. Now I really need the other computers on the client LAN to be able to connect to the webapp as well, via the windows machine. The client has a static IP address of 192.168.2.100 on the LAN, and I've enabled IP forwarding in windows (confirmed by ipconfig /all). In my router I've forwarded 10.83.41.1 / 255.255.255.255 to 192.168.2.100. In server.conf I have.. route 192.168.2.0 255.255.255.0 And in the office ccd.. ifconfig-push 10.83.41.9 10.83.41.10 iroute 192.168.2.0 255.255.255.0 The client log is as follows: Thu Mar 15 20:19:56 2012 OpenVPN 2.2.2 Win32-MSVC++ [SSL] [LZO2] [PKCS11] built on Dec 15 2011 Thu Mar 15 20:19:56 2012 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Thu Mar 15 20:19:56 2012 Control Channel Authentication: using 'ta.key' as a OpenVPN static key file Thu Mar 15 20:19:56 2012 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Thu Mar 15 20:19:56 2012 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Thu Mar 15 20:19:56 2012 LZO compression initialized Thu Mar 15 20:19:56 2012 Control Channel MTU parms [ L:1558 D:166 EF:66 EB:0 ET:0 EL:0 ] Thu Mar 15 20:19:56 2012 Socket Buffers: R=[8192->8192] S=[64512->64512] Thu Mar 15 20:19:56 2012 Data Channel MTU parms [ L:1558 D:1450 EF:58 EB:135 ET:0 EL:0 AF:3/1 ] Thu Mar 15 20:19:56 2012 Local Options hash (VER=V4): '9e7066d2' Thu Mar 15 20:19:56 2012 Expected Remote Options hash (VER=V4): '162b04de' Thu Mar 15 20:19:56 2012 UDPv4 link local: [undef] Thu Mar 15 20:19:56 2012 UDPv4 link remote: 111.65.224.202:1194 Thu Mar 15 20:19:56 2012 TLS: Initial packet from 111.65.224.202:1194, sid=ceb04c22 8cc6d151 Thu Mar 15 20:19:56 2012 VERIFY OK: depth=1, /C=NZ/O=XXX./CN=XXX Thu Mar 15 20:19:56 2012 VERIFY OK: nsCertType=SERVER Thu Mar 15 20:19:56 2012 VERIFY OK: depth=0, /C=NZ/O=XXX./CN=XXX Thu Mar 15 20:19:56 2012 Replay-window backtrack occurred [1] Thu Mar 15 20:19:56 2012 Data Channel Encrypt: Cipher 'AES-256-CBC' initialized with 256 bit key Thu Mar 15 20:19:56 2012 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Thu Mar 15 20:19:56 2012 Data Channel Decrypt: Cipher 'AES-256-CBC' initialized with 256 bit key Thu Mar 15 20:19:56 2012 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Thu Mar 15 20:19:56 2012 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Thu Mar 15 20:19:56 2012 [server] Peer Connection Initiated with 111.65.224.202:1194 Thu Mar 15 20:19:58 2012 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1) Thu Mar 15 20:19:59 2012 PUSH: Received control message: 'PUSH_REPLY,route 10.83.41.1,topology net30,ping 10,ping-restart 120,ifconfig 10.83.41.9 10.83.41.10' Thu Mar 15 20:19:59 2012 OPTIONS IMPORT: timers and/or timeouts modified Thu Mar 15 20:19:59 2012 OPTIONS IMPORT: --ifconfig/up options modified Thu Mar 15 20:19:59 2012 OPTIONS IMPORT: route options modified Thu Mar 15 20:19:59 2012 ROUTE default_gateway=192.168.2.1 Thu Mar 15 20:19:59 2012 TAP-WIN32 device [OpenVPN] opened: \\.\Global\{B32D85C9-1942-42E2-80BA-7E0B5BB5185F}.tap Thu Mar 15 20:19:59 2012 TAP-Win32 Driver Version 9.9 Thu Mar 15 20:19:59 2012 TAP-Win32 MTU=1500 Thu Mar 15 20:19:59 2012 Notified TAP-Win32 driver to set a DHCP IP/netmask of 10.83.41.9/255.255.255.252 on interface {B32D85C9-1942-42E2-80BA-7E0B5BB5185F} [DHCP-serv: 10.83.41.10, lease-time: 31536000] Thu Mar 15 20:19:59 2012 Successful ARP Flush on interface [45] {B32D85C9-1942-42E2-80BA-7E0B5BB5185F} Thu Mar 15 20:20:04 2012 TEST ROUTES: 1/1 succeeded len=1 ret=1 a=0 u/d=up Thu Mar 15 20:20:04 2012 C:\WINDOWS\system32\route.exe ADD 10.83.41.1 MASK 255.255.255.255 10.83.41.10 Thu Mar 15 20:20:04 2012 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=30 and dwForwardType=4 Thu Mar 15 20:20:04 2012 Route addition via IPAPI succeeded [adaptive] Thu Mar 15 20:20:04 2012 Initialization Sequence Completed From the other machines I can ping 192.169.2.100, but not 10.83.41.1. In the how-to, it mentions "Make sure your network interface is in promiscuous mode." as well. I can't find in the windows network config, so this may or may not be part of it. Ideally this would be achieved without any special configuration the other LAN computers. Not sure how far I'm going to get on my own at this point, any ideas? Is there something I'm missing, or anything I should need to know?

    Read the article

  • NMap route determination on Windows 7 x64

    - by user30772
    C:\Windows\system32>nmap --iflist Starting Nmap 6.01 ( http://nmap.org ) at 2012-08-31 06:51 Central Daylight Time ************************INTERFACES************************ DEV (SHORT) IP/MASK TYPE UP MTU MAC eth0 (eth0) fe80::797f:b9b6:3ee0:27b8/64 ethernet down 1500 5C:AC:4C:E9:2D:46 eth0 (eth0) 169.254.39.184/4 ethernet down 1500 5C:AC:4C:E9:2D:46 eth1 (eth1) fe80::5c02:7e48:8fbe:c7c9/64 ethernet down 1500 00:FF:3F:7C:7C:2B eth1 (eth1) 169.254.199.201/4 ethernet down 1500 00:FF:3F:7C:7C:2B eth2 (eth2) fe80::74e4:1ab7:1b7d:a0d0/64 ethernet up 1500 14:FE:B5:BA:8A:C3 eth2 (eth2) 10.0.0.0.253/24 ethernet up 1500 14:FE:B5:BA:8A:C3 eth3 (eth3) fe80::b03e:ddf5:bb5c:5f76/64 ethernet up 1500 00:50:56:C0:00:01 eth3 (eth3) 169.254.95.118/16 ethernet up 1500 00:50:56:C0:00:01 eth4 (eth4) fe80::b175:831d:e60:27b/64 ethernet up 1500 00:50:56:C0:00:08 eth4 (eth4) 192.168.153.1/24 ethernet up 1500 00:50:56:C0:00:08 lo0 (lo0) ::1/128 loopback up -1 lo0 (lo0) 127.0.0.1/8 loopback up -1 tun0 (tun0) fe80::100:7f:fffe/64 point2point down 1280 tun1 (tun1) (null)/0 point2point down 1280 tun2 (tun2) fe80::5efe:a9fe:5f76/128 point2point down 1280 tun3 (tun3) (null)/0 point2point down 1280 tun4 (tun4) fe80::5efe:c0a8:9901/128 point2point down 1280 tun5 (tun5) fe80::5efe:ac14:fd/128 point2point down 1280 DEV WINDEVICE eth0 \Device\NPF_{0024872A-5A41-42DF-B484-FB3D3ED3FCE9} eth0 \Device\NPF_{0024872A-5A41-42DF-B484-FB3D3ED3FCE9} eth1 \Device\NPF_{3F7C7C2B-9AF3-45BB-B96E-2F00143CC2F7} eth1 \Device\NPF_{3F7C7C2B-9AF3-45BB-B96E-2F00143CC2F7} eth2 \Device\NPF_{08116FE5-F0FF-498A-9BF1-515528C57C13} eth2 \Device\NPF_{08116FE5-F0FF-498A-9BF1-515528C57C13} eth3 \Device\NPF_{AA83C6CE-AB2E-4764-92D1-CDEAFBA7AD21} eth3 \Device\NPF_{AA83C6CE-AB2E-4764-92D1-CDEAFBA7AD21} eth4 \Device\NPF_{D0679889-E9D4-411D-BDC5-F4DDB758E151} eth4 \Device\NPF_{D0679889-E9D4-411D-BDC5-F4DDB758E151} lo0 <none> lo0 <none> tun0 <none> tun1 <none> tun2 <none> tun3 <none> tun4 <none> tun5 <none> **************************ROUTES************************** DST/MASK DEV GATEWAY 192.168.153.255/32 eth0 255.255.255.255/32 eth0 255.255.255.255/32 eth0 127.0.0.1/32 eth0 127.255.255.255/32 eth0 255.255.255.255/32 eth0 169.254.95.118/32 eth0 169.254.255.255/32 eth0 10.0.0.0.253/32 eth0 255.255.255.255/32 eth0 10.0.0.0.255/32 eth0 255.255.255.255/32 eth0 192.168.153.1/32 eth0 255.255.255.255/32 eth0 10.0.0.0.0/24 eth0 192.168.153.0/24 eth0 10.10.10.0/24 eth0 10.0.0.0.4 169.254.0.0/16 eth0 127.0.0.0/8 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 0.0.0.0/0 eth0 10.0.0.0.1 JMeterX - I worded that way in hopes of raising answer efficnecy, but that probably wasnt the smartest choice. IMHO the problem (could be a symptom) is that nmap retardedly chooses eth0 as the gateway interface for any and all networks. Here's the result: C:\Windows\system32>nmap 10.0.0.55 Starting Nmap 6.01 ( http://nmap.org ) at 2012-08-31 07:43 Central Daylight Time Note: Host seems down. If it is really up, but blocking our ping probes, try -Pn Nmap done: 1 IP address (0 hosts up) scanned in 0.95 seconds C:\Windows\system32>nmap -e eth2 10.0.0.55 Starting Nmap 6.01 ( http://nmap.org ) at 2012-08-31 07:44 Central Daylight Time Nmap scan report for esxy5.dionne.net (10.0.0.55) Host is up (0.00070s latency). Not shown: 991 filtered ports PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 427/tcp open svrloc 443/tcp open https 902/tcp open iss-realsecure 5988/tcp closed wbem-http 5989/tcp open wbem-https 8000/tcp open http-alt 8100/tcp open xprint-server MAC Address: 00:1F:29:59:C7:03 (Hewlett-Packard Company) Nmap done: 1 IP address (1 host up) scanned in 5.29 seconds Just to be clear, this is what makes absolutly no sense to me whatsoever. For reference, I've included similar info from an Ubuntu (that works normally) vm on the affected host below. Jacked Windows 7 **************************ROUTES************************** DST/MASK DEV GATEWAY 192.168.153.255/32 eth0 255.255.255.255/32 eth0 255.255.255.255/32 eth0 127.0.0.1/32 eth0 127.255.255.255/32 eth0 255.255.255.255/32 eth0 169.254.95.118/32 eth0 169.254.255.255/32 eth0 10.0.0.0.253/32 eth0 255.255.255.255/32 eth0 10.0.0.0.255/32 eth0 255.255.255.255/32 eth0 192.168.153.1/32 eth0 255.255.255.255/32 eth0 10.0.0.0.0/24 eth0 192.168.153.0/24 eth0 10.10.10.0/24 eth0 10.0.0.0.4 169.254.0.0/16 eth0 127.0.0.0/8 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 0.0.0.0/0 eth0 10.0.0.0.1 Working Ubuntu VM root@ubuntu:~# nmap --iflist Starting Nmap 5.21 ( http://nmap.org ) at 2012-08-31 07:44 PDT ************************INTERFACES************************ DEV (SHORT) IP/MASK TYPE UP MAC lo (lo) 127.0.0.1/8 loopback up eth0 (eth0) 172.20.0.89/24 ethernet up 00:0C:29:0A:C9:35 eth1 (eth1) 192.168.225.128/24 ethernet up 00:0C:29:0A:C9:3F eth2 (eth2) 192.168.150.128/24 ethernet up 00:0C:29:0A:C9:49 **************************ROUTES************************** DST/MASK DEV GATEWAY 192.168.225.0/0 eth1 192.168.150.0/0 eth2 172.20.0.0/0 eth0 169.254.0.0/0 eth0 0.0.0.0/0 eth0 172.20.0.1 root@ubuntu:~# nmap esxy2 Starting Nmap 5.21 ( http://nmap.org ) at 2012-08-31 07:44 PDT Nmap scan report for esxy2 (172.20.0.52) Host is up (0.00036s latency). rDNS record for 172.20.0.52: esxy2.dionne.net Not shown: 994 filtered ports PORT STATE SERVICE 80/tcp open http 427/tcp closed svrloc 443/tcp open https 902/tcp closed iss-realsecure 8000/tcp open http-alt 8100/tcp open unknown MAC Address: 00:04:23:B1:FA:6A (Intel) Nmap done: 1 IP address (1 host up) scanned in 4.76 seconds

    Read the article

  • Common Areas For Securing Web Services

    The only way to truly keep a web service secure is to host it on a web server and then turn off the server. In real life no web service is 100% secure but there are methodologies for increasing the security around web services. In order for consumers of a web service they must adhere to the service’s Service-Level Agreement (SLA).  An SLA is a digital contract between a web service and its consumer. This contract defines what methods and protocols must be used to access the web service along with the defined data formats for sending and receiving data through the service. If either part does not abide by the contract then the service will not be accessible for consumption. Common areas for securing web services: Universal Discovery Description Integration  (UDDI) Web Service Description Language  (WSDL) Application Level Network Level “UDDI is a specification for maintaining standardized directories of information about web services, recording their capabilities, location and requirements in a universally recognized format.” (UDDI, 2010) WSDL on the other hand is a standardized format for defining a web service. A WSDL describes the allowable methods for accessing the web service along with what operations it performs. Web services in the Application Level can control access to what data is available by implementing its own security through various methodologies but the most common method is to have a consumer pass in a token along with a system identifier so that they system can validate the users access to any data or actions that they may be requesting. Security restrictions can also be applied to the host web server of the service by restricting access to the site by IP address or login credentials. Furthermore, companies can also block access to a service by using firewall rules and only allowing access to specific services on certain ports coming from specific IP addresses. This last methodology may require consumers to obtain a static IP address and then register it with the web service host so that they will be provide access to the information they wish to obtain. It is important to note that these areas can be secured in any combination based on the security level tolerance dictated by the publisher of the web service. This being said, the bare minimum security implantation must be in the Application Level within the web service itself. Typically I create a security layer within a web services exposed Internet that requires a consumer identifier and a consumer token. This information is then used to authenticate the requesting consumer before the actual request is performed. Refernece:UDDI. (2010). Retrieved 11 13, 2011, from LooselyCoupled.com: http://www.looselycoupled.com/glossary/UDDIService-Level Agreement (SLA). (n.d.). Retrieved 11 13, 2011, from SearchITChannel: http://searchitchannel.techtarget.com/definition/service-level-agreement

    Read the article

  • CAPTCHA blocking for my scraping script?

    - by Surabhil Sergy
    I am working on a scraping project which involves getting web data and parsing them for further use. I have been working using PHP and CURL to make scraping scripts which crawls web data and I make use of either PHP Dom or Simple HTML DOM Parser library for these kinds of projects. On a recent project I encountered some challenges; initially I found the target website blocked my server IP such that the server could not make any successful requests to the site. Understanding these issues as common I bought a set of private proxies and tried to make request calls using them. Though this could get successful response, I noticed the script is getting some kind of blocks after 2-3 continuous requests. On printing and checking the response I could see a pop-up asking for CAPTCHA validation. I could not see any captcha characters to be entered and it also shows an error “input error: invalid referrer”. On examining the source I could see some Google recaptcha scripts within. I’m stuck at this point and I m not able to execute my script. My script is used for gathering data and it needs to go through a large number of pages periodically over the site. But in the current scenario I am not able to proceed with my script. I could see there are some options to overcome these captcha issues and scraping these kinds of sites too are common. I have been checking my script performance and responses over last two months. I could see during first month I was able to execute very large number of requests from a single IP and I was able to get results. Later I get an IP block and used private proxies which could get me some results. Later I am facing now with the captcha trouble. I would appreciate any help or suggestions in this regard. (Often in this kind of questions I used to get a first comment as, ‘Have you asked for prior permission from the target?’ .I haven’t ,but I know there are many sites doing so to get the details out of sites and target sites may not often give access to them. I respect the legality and scraping etiquettes but I would like to know at what point I stuck and how could I overcome that! ) I could provide any supporting information if needed.

    Read the article

< Previous Page | 196 197 198 199 200 201 202 203 204 205 206 207  | Next Page >